Revision 4cab4ca49c9e5ed08de64533ca79429e2f41491a authored by Eh Tan on 12 November 2007, 22:49:46 UTC, committed by Eh Tan on 12 November 2007, 22:49:46 UTC
........ r8275 | becker | 2007-11-11 12:37:22 -0800 (Sun, 11 Nov 2007) | 3 lines Synching with the new release, none of those changes should be relevant. ........
1 parent 0461d2e
README
* To convert pseudo-free-surface B.C. to free-slip B.C., do the following:
1) --solver.bc.topvbc=2 --> --solver.bc.topvbc=0
2) --solver.bc.pseudo_free_surf=on --> --solver.bc.pseudo_free_surf=off
* To try a different hot blob, one can specify three parameters:
1. solver.ic.blob_center: Coordinates(theta,fi,r) of the center.
2. solver.ic.blob_radius: Radius as non-dimensional distance.
3. solver.ic.blob_dT: The amount of temperature increase/decrease
within the blob as non-dimensional temperature.
Note: It is required to keep "solver.ic.tic_method=2" to have the initial hot blob.
Computing file changes ...