| 4cc1bec | Pravin B Shelar | 24 December 2014, 00:20:16 UTC | mpls: Fix allowed protocols for mpls gso MPLS and Tunnel GSO does not work together. Reject packet which request such GSO. Fixes: 0d89d2035f ("MPLS: Add limited GSO support"). Signed-off-by: Pravin B Shelar <pshelar@nicira.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 24 December 2014, 04:57:31 UTC |
| d0edc7b | Pravin B Shelar | 24 December 2014, 00:20:11 UTC | mpls: Fix config check for mpls. Fixes MPLS GSO for case when mpls is compiled as kernel module. Fixes: 0d89d2035f ("MPLS: Add limited GSO support"). Signed-off-by: Pravin B Shelar <pshelar@nicira.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 24 December 2014, 04:57:30 UTC |
| ceb8d5b | Herbert Xu | 20 December 2014, 20:16:25 UTC | net: Rearrange loop in net_rx_action This patch rearranges the loop in net_rx_action to reduce the amount of jumping back and forth when reading the code. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net> | 24 December 2014, 04:20:21 UTC |
| 6bd373e | Herbert Xu | 20 December 2014, 20:16:24 UTC | net: Always poll at least one device in net_rx_action We should only perform the softnet_break check after we have polled at least one device in net_rx_action. Otherwise a zero or negative setting of netdev_budget can lock up the whole system. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net> | 24 December 2014, 04:20:21 UTC |
| 001ce54 | Herbert Xu | 20 December 2014, 20:16:22 UTC | net: Detect drivers that reschedule NAPI and exhaust budget The commit d75b1ade567ffab085e8adbbdacf0092d10cd09c (net: less interrupt masking in NAPI) required drivers to leave poll_list empty if the entire budget is consumed. We have already had two broken drivers so let's add a check for this. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net> | 24 December 2014, 04:20:21 UTC |
| 726ce70 | Herbert Xu | 20 December 2014, 20:16:21 UTC | net: Move napi polling code out of net_rx_action This patch creates a new function napi_poll and moves the napi polling code from net_rx_action into it. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net> | 24 December 2014, 04:20:21 UTC |
| 0d16449 | Antonio Quartulli | 20 December 2014, 12:48:57 UTC | batman-adv: avoid NULL dereferences and fix if check Gateway having bandwidth_down equal to zero are not accepted at all and so never added to the Gateway list. For this reason checking the bandwidth_down member in batadv_gw_out_of_range() is useless. This is probably a copy/paste error and this check was supposed to be "!gw_node" only. Moreover, the way the check is written now may also lead to a NULL dereference. Fix this by rewriting the if-condition properly. Introduced by 414254e342a0d58144de40c3da777521ebaeeb07 ("batman-adv: tvlv - gateway download/upload bandwidth container") Signed-off-by: Antonio Quartulli <antonio@meshcoding.com> Reported-by: David Binderman <dcb314@hotmail.com> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: David S. Miller <davem@davemloft.net> | 24 December 2014, 04:13:37 UTC |
| 0402e44 | Sven Eckelmann | 20 December 2014, 12:48:56 UTC | batman-adv: Unify fragment size calculation The fragmentation code was replaced in 610bfc6bc99bc83680d190ebc69359a05fc7f605 ("batman-adv: Receive fragmented packets and merge") by an implementation which can handle up to 16 fragments of a packet. The packet is prepared for the split in fragments by the function batadv_frag_send_packet and the actual split is done by batadv_frag_create. Both functions calculate the size of a fragment themself. But their calculation differs because batadv_frag_send_packet also subtracts ETH_HLEN. Therefore, the check in batadv_frag_send_packet "can a full fragment can be created?" may return true even when batadv_frag_create cannot create a full fragment. The function batadv_frag_create doesn't check the size of the skb before splitting it and therefore might try to create a larger fragment than the remaining buffer. This creates an integer underflow and an invalid len is given to skb_split. Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: David S. Miller <davem@davemloft.net> | 24 December 2014, 04:13:37 UTC |
| 5b6698b | Sven Eckelmann | 20 December 2014, 12:48:55 UTC | batman-adv: Calculate extra tail size based on queued fragments The fragmentation code was replaced in 610bfc6bc99bc83680d190ebc69359a05fc7f605 ("batman-adv: Receive fragmented packets and merge"). The new code provided a mostly unused parameter skb for the merging function. It is used inside the function to calculate the additionally needed skb tailroom. But instead of increasing its own tailroom, it is only increasing the tailroom of the first queued skb. This is not correct in some situations because the first queued entry can be a different one than the parameter. An observed problem was: 1. packet with size 104, total_size 1464, fragno 1 was received - packet is queued 2. packet with size 1400, total_size 1464, fragno 0 was received - packet is queued at the end of the list 3. enough data was received and can be given to the merge function (1464 == (1400 - 20) + (104 - 20)) - merge functions gets 1400 byte large packet as skb argument 4. merge function gets first entry in queue (104 byte) - stored as skb_out 5. merge function calculates the required extra tail as total_size - skb->len - pskb_expand_head tail of skb_out with 64 bytes 6. merge function tries to squeeze the extra 1380 bytes from the second queued skb (1400 byte aka skb parameter) in the 64 extra tail bytes of skb_out Instead calculate the extra required tail bytes for skb_out also using skb_out instead of using the parameter skb. The skb parameter is only used to get the total_size from the last received packet. This is also the total_size used to decide that all fragments were received. Reported-by: Philipp Psurek <philipp.psurek@gmail.com> Signed-off-by: Sven Eckelmann <sven@narfation.org> Acked-by: Martin Hundebøll <martin@hundeboll.net> Signed-off-by: David S. Miller <davem@davemloft.net> | 24 December 2014, 04:13:37 UTC |
| af6dabc | Jason Wang | 19 December 2014, 03:09:13 UTC | net: drop the packet when fails to do software segmentation or header check Commit cecda693a969816bac5e470e1d9c9c0ef5567bca ("net: keep original skb which only needs header checking during software GSO") keeps the original skb for packets that only needs header check, but it doesn't drop the packet if software segmentation or header check were failed. Fixes cecda693a9 ("net: keep original skb which only needs header checking during software GSO") Cc: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 24 December 2014, 04:12:11 UTC |
| 2dc49d1 | Nicolas Dichtel | 22 December 2014, 17:22:48 UTC | tcp6: don't move IP6CB before xfrm6_policy_check() When xfrm6_policy_check() is used, _decode_session6() is called after some intermediate functions. This function uses IP6CB(), thus TCP_SKB_CB() must be prepared after the call of xfrm6_policy_check(). Before this patch, scenarii with IPv6 + TCP + IPsec Transport are broken. Fixes: 971f10eca186 ("tcp: better TCP_SKB_CB layout to reduce cache line misses") Reported-by: Huaibin Wang <huaibin.wang@6wind.com> Suggested-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 22 December 2014, 21:48:01 UTC |
| 5ad24de | Hariprasad Shenai | 22 December 2014, 09:44:37 UTC | cxgb4vf: Fix ethtool get_settings for VF driver Decode and display Port Type and Module Type for ethtool get_settings() call Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 22 December 2014, 21:35:28 UTC |
| 3079c65 | Herbert Xu | 22 December 2014, 09:35:25 UTC | caif: Fix napi poll list corruption The commit d75b1ade567ffab085e8adbbdacf0092d10cd09c (net: less interrupt masking in NAPI) breaks caif. It is now required that if the entire budget is consumed when poll returns, the napi poll_list must remain empty. However, like some other drivers caif tries to do a last-ditch check and if there is more work it will call napi_schedule and then immediately process some of this new work. Should the entire budget be consumed while processing such new work then we will violate the new caller contract. This patch fixes this by not touching any work when we reschedule in caif. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net> | 22 December 2014, 21:34:39 UTC |
| 492f5ad | Amir Vadai | 22 December 2014, 08:21:57 UTC | net/mlx4_en: Doorbell is byteswapped in Little Endian archs iowrite32() will byteswap it's argument on big endian archs. iowrite32be() will byteswap on little endian archs. Since we don't want to do this unnecessary byteswap on the fast path, doorbell is stored in the NIC's native endianness. Using the right iowrite() according to the arch endianness. CC: Wei Yang <weiyang@linux.vnet.ibm.com> CC: David Laight <david.laight@aculab.com> Fixes: 6a4e812 ("net/mlx4_en: Avoid calling bswap in tx fast path") Signed-off-by: Amir Vadai <amirv@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 22 December 2014, 21:33:10 UTC |
| ea3c9e1 | Jia-Ju Bai | 22 December 2014, 00:43:14 UTC | 8139too: Add netif_napi_del in the driver For linux-3.18.0 The driver lacks netif_napi_del in the normal path and error path to match the call of netif_napi_add in rtl8139_init_one. This patch fixes this problem. Signed-off-by: Jia-Ju Bai <baijiaju1990@163.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 22 December 2014, 21:31:58 UTC |
| 6402a57 | Jia-Ju Bai | 22 December 2014, 00:28:52 UTC | 8139too: Fix the lack of pci_disable_device For linux-3.18.0 When pci_request_regions is failed in rtl8139_init_board, pci_disable_device is not called to disable the device which are enabled by pci_enable_device, because of disable_dev_on_err is not assigned 1. This patch fix this problem. Signed-off-by: Jia-Ju Bai <baijiaju1990@163.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 22 December 2014, 21:31:58 UTC |
| f620e4f | Wolfram Sang | 21 December 2014, 21:14:31 UTC | net: ethernet: stmicro: stmmac: drop owner assignment from platform_drivers This platform_driver does not need to set an owner, it will be populated by the driver core. Signed-off-by: Wolfram Sang <wsa@the-dreams.de> Signed-off-by: David S. Miller <davem@davemloft.net> | 22 December 2014, 21:30:00 UTC |
| f3ba9d4 | Daniel Glöckner | 21 December 2014, 19:27:39 UTC | net: s6gmac: remove driver The s6000 Xtensa support has been removed from the kernel in 4006e565e1500db4. There are no other chips using this driver. While the Mentor/Alcatel PE-MCXMAC IP core is also used in other designs (Freescale Gianfar/UCC, QLogic NetXen, Solarflare, Agere ET-1310, Netlogic XLR/XLS), none of these use this driver as it heavily depends on the s6000 DMA engine. In fact, there is no code sharing across any of the aforementioned devices. Signed-off-by: Daniel Glöckner <dg@emlix.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 22 December 2014, 21:29:03 UTC |
| 62633b8 | Rickard Strandqvist | 21 December 2014, 17:41:38 UTC | net: ethernet: micrel: ksz884x.c: Remove unused function Remove the function port_cfg_dis_learn() that is not used anywhere. This was partially found by using a static code analysis program called cppcheck. Signed-off-by: Rickard Strandqvist <rickard_strandqvist@spectrumdigital.se> Signed-off-by: David S. Miller <davem@davemloft.net> | 22 December 2014, 21:23:09 UTC |
| 05b0aa5 | Prashant Sreedharan | 20 December 2014, 20:16:17 UTC | tg3: tg3_disable_ints using uninitialized mailbox value to disable interrupts During driver load in tg3_init_one, if the driver detects DMA activity before intializing the chip tg3_halt is called. As part of tg3_halt interrupts are disabled using routine tg3_disable_ints. This routine was using mailbox value which was not initialized (default value is 0). As a result driver was writing 0x00000001 to pci config space register 0, which is the vendor id / device id. This driver bug was exposed because of the commit a7877b17a667 (PCI: Check only the Vendor ID to identify Configuration Request Retry). Also this issue is only seen in older generation chipsets like 5722 because config space write to offset 0 from driver is possible. The newer generation chips ignore writes to offset 0. Also without commit a7877b17a667, for these older chips when a GRC reset is issued the Bootcode would reprogram the vendor id/device id, which is the reason this bug was masked earlier. Fixed by initializing the interrupt mailbox registers before calling tg3_halt. Please queue for -stable. Reported-by: Nils Holland <nholland@tisys.org> Reported-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: Prashant Sreedharan <prashant@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 22 December 2014, 21:13:32 UTC |
| 6d08acd | stephen hemminger | 20 December 2014, 20:15:49 UTC | in6: fix conflict with glibc Resolve conflicts between glibc definition of IPV6 socket options and those defined in Linux headers. Looks like earlier efforts to solve this did not cover all the definitions. It resolves warnings during iproute2 build. Please consider for stable as well. Signed-off-by: Stephen Hemminger <stephen@networkplumber.org> Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net> | 22 December 2014, 21:12:36 UTC |
| c51ed18 | Haiyang Zhang | 20 December 2014, 02:25:18 UTC | hyperv: Fix some variable name typos in send-buffer init/revoke The changed names are union fields with the same size, so the existing code still works. But, we now update these variables to the correct names. Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com> Reviewed-by: K. Y. Srinivasan <kys@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 22 December 2014, 21:11:11 UTC |
| 8acdf99 | Herbert Xu | 20 December 2014, 00:23:27 UTC | virtio_net: Fix napi poll list corruption The commit d75b1ade567ffab085e8adbbdacf0092d10cd09c (net: less interrupt masking in NAPI) breaks virtio_net in an insidious way. It is now required that if the entire budget is consumed when poll returns, the napi poll_list must remain empty. However, like some other drivers virtio_net tries to do a last-ditch check and if there is more work it will call napi_schedule and then immediately process some of this new work. Should the entire budget be consumed while processing such new work then we will violate the new caller contract. This patch fixes this by not touching any work when we reschedule in virtio_net. The worst part of this bug is that the list corruption causes other napi users to be moved off-list. In my case I was chasing a stall in IPsec (IPsec uses netif_rx) and I only belatedly realised that it was virtio_net which caused the stall even though the virtio_net poll was still functioning perfectly after IPsec stalled. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Acked-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 22 December 2014, 21:10:12 UTC |
| fe13192 | Huacai Chen | 19 December 2014, 14:38:18 UTC | stmmac: Don't init ptp again when resume from suspend/hibernation Both stmmac_open() and stmmac_resume() call stmmac_hw_setup(), and stmmac_hw_setup() call stmmac_init_ptp() unconditionally. However, only stmmac_release() calls stmmac_release_ptp(). Since stmmac_suspend() doesn't call stmmac_release_ptp(), stmmac_resume() also needn't call stmmac_init_ptp(). This patch also fix a "scheduling while atomic" problem when resume from suspend/hibernation. Because stmmac_init_ptp() will trigger scheduling while stmmac_resume() hold a spinlock. Callgraph of "scheduling while atomic": stmmac_resume() --> stmmac_hw_setup() --> stmmac_init_ptp() --> stmmac_ptp_register() --> ptp_clock_register() --> device_create() --> device_create_groups_vargs() --> device_add() --> devtmpfs_create_node() --> wait_for_common() --> schedule_timeout() --> __schedule() Signed-off-by: Huacai Chen <chenhc@lemote.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 22 December 2014, 20:42:13 UTC |
| da413ee | Dan Collins | 19 December 2014, 03:49:25 UTC | packet: Fixed TPACKET V3 to signal poll when block is closed rather than every packet Make TPACKET_V3 signal poll when block is closed rather than for every packet. Side effect is that poll will be signaled when block retire timer expires which didn't previously happen. Issue was visible when sending packets at a very low frequency such that all blocks are retired before packets are received by TPACKET_V3. This caused avoidable packet loss. The fix ensures that the signal is sent when blocks are closed which covers the normal path where the block is filled as well as the path where the timer expires. The case where a block is filled without moving to the next block (ie. all blocks are full) will still cause poll to be signaled. Signed-off-by: Dan Collins <dan@dcollins.co.nz> Signed-off-by: David S. Miller <davem@davemloft.net> | 22 December 2014, 20:41:15 UTC |
| 02d6a74 | David S. Miller | 19 December 2014, 20:47:32 UTC | Merge branch 'for-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth Johan Hedberg says: ==================== pull request: bluetooth 2014-12-19 Here's one more pull request for 3.19. It contains the socket type verification fixes from Al Viro as well as an skb double-free fix for 6lowpan from Jukka Rissanen. Please let me know if there are any issues pulling. Thanks. ==================== Signed-off-by: David S. Miller <davem@davemloft.net> | 19 December 2014, 20:47:32 UTC |
| 17e9683 | Govindarajulu Varadarajan | 18 December 2014, 10:28:42 UTC | enic: fix rx skb checksum Hardware always provides compliment of IP pseudo checksum. Stack expects whole packet checksum without pseudo checksum if CHECKSUM_COMPLETE is set. This causes checksum error in nf & ovs. kernel: qg-19546f09-f2: hw csum failure kernel: CPU: 9 PID: 0 Comm: swapper/9 Tainted: GF O-------------- 3.10.0-123.8.1.el7.x86_64 #1 kernel: Hardware name: Cisco Systems Inc UCSB-B200-M3/UCSB-B200-M3, BIOS B200M3.2.2.3.0.080820141339 08/08/2014 kernel: ffff881218f40000 df68243feb35e3a8 ffff881237a43ab8 ffffffff815e237b kernel: ffff881237a43ad0 ffffffff814cd4ca ffff8829ec71eb00 ffff881237a43af0 kernel: ffffffff814c6232 0000000000000286 ffff8829ec71eb00 ffff881237a43b00 kernel: Call Trace: kernel: <IRQ> [<ffffffff815e237b>] dump_stack+0x19/0x1b kernel: [<ffffffff814cd4ca>] netdev_rx_csum_fault+0x3a/0x40 kernel: [<ffffffff814c6232>] __skb_checksum_complete_head+0x62/0x70 kernel: [<ffffffff814c6251>] __skb_checksum_complete+0x11/0x20 kernel: [<ffffffff8155a20c>] nf_ip_checksum+0xcc/0x100 kernel: [<ffffffffa049edc7>] icmp_error+0x1f7/0x35c [nf_conntrack_ipv4] kernel: [<ffffffff814cf419>] ? netif_rx+0xb9/0x1d0 kernel: [<ffffffffa040eb7b>] ? internal_dev_recv+0xdb/0x130 [openvswitch] kernel: [<ffffffffa04c8330>] nf_conntrack_in+0xf0/0xa80 [nf_conntrack] kernel: [<ffffffff81509380>] ? inet_del_offload+0x40/0x40 kernel: [<ffffffffa049e302>] ipv4_conntrack_in+0x22/0x30 [nf_conntrack_ipv4] kernel: [<ffffffff815005ca>] nf_iterate+0xaa/0xc0 kernel: [<ffffffff81509380>] ? inet_del_offload+0x40/0x40 kernel: [<ffffffff81500664>] nf_hook_slow+0x84/0x140 kernel: [<ffffffff81509380>] ? inet_del_offload+0x40/0x40 kernel: [<ffffffff81509dd4>] ip_rcv+0x344/0x380 Hardware verifies IP & tcp/udp header checksum but does not provide payload checksum, use CHECKSUM_UNNECESSARY. Set it only if its valid IP tcp/udp packet. Cc: Jiri Benc <jbenc@redhat.com> Cc: Stefan Assmann <sassmann@redhat.com> Reported-by: Sunil Choudhary <schoudha@redhat.com> Signed-off-by: Govindarajulu Varadarajan <_govind@gmx.com> Reviewed-by: Jiri Benc <jbenc@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 19 December 2014, 20:45:28 UTC |
| 4f2ff8e | Li RongQing | 19 December 2014, 05:19:35 UTC | sunvnet: fix a memory leak in vnet_handle_offloads when skb_gso_segment returns error, the original skb should be freed Signed-off-by: Li RongQing <roy.qing.li@gmail.com> Acked-by: David L Stevens <david.stevens@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 19 December 2014, 18:19:45 UTC |
| 71bb99a | Al Viro | 19 December 2014, 06:20:59 UTC | Bluetooth: bnep: bnep_add_connection() should verify that it's dealing with l2cap socket same story as cmtp Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Marcel Holtmann <marcel@holtmann.org> | 19 December 2014, 12:48:27 UTC |
| 96c2665 | Al Viro | 19 December 2014, 06:20:58 UTC | Bluetooth: cmtp: cmtp_add_connection() should verify that it's dealing with l2cap socket ... rather than relying on ciptool(8) never passing it anything else. Give it e.g. an AF_UNIX connected socket (from socketpair(2)) and it'll oops, trying to evaluate &l2cap_pi(sock->sk)->chan->dst... Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Marcel Holtmann <marcel@holtmann.org> | 19 December 2014, 12:48:21 UTC |
| 51bda2b | Al Viro | 19 December 2014, 06:20:57 UTC | Bluetooth: hidp_connection_add() unsafe use of l2cap_pi() it's OK after we'd verified the sockets, but not before that. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Marcel Holtmann <marcel@holtmann.org> | 19 December 2014, 12:40:07 UTC |
| 004fa5e | Jukka Rissanen | 10 December 2014, 12:19:53 UTC | Bluetooth: 6lowpan: Do not free skb when packet is dropped If we need to drop the message because of some error in the compression etc, then do not free the skb as that is done automatically in other part of networking stack. Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org> | 19 December 2014, 12:39:50 UTC |
| d790be3 | Linus Torvalds | 19 December 2014, 04:55:41 UTC | Merge tag 'modules-next-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux Pull module updates from Rusty Russell: "The exciting thing here is the getting rid of stop_machine on module removal. This is possible by using a simple atomic_t for the counter, rather than our fancy per-cpu counter: it turns out that no one is doing a module increment per net packet, so the slowdown should be in the noise" * tag 'modules-next-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux: param: do not set store func without write perm params: cleanup sysfs allocation kernel:module Fix coding style errors and warnings. module: Remove stop_machine from module unloading module: Replace module_ref with atomic_t refcnt lib/bug: Use RCU list ops for module_bug_list module: Unlink module with RCU synchronizing instead of stop_machine module: Wait for RCU synchronizing before releasing a module | 19 December 2014, 04:55:41 UTC |
| 64ec45b | Linus Torvalds | 19 December 2014, 04:50:30 UTC | Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost Pull virtio fixes from Michael S Tsirkin: "virtio 1.0 related fixes Most importantly, this fixes using virtio_pci as a module. Further, the big virtio 1.0 conversion missed a couple of places. This fixes them up. This isn't 100% sparse-clean yet because on many architectures get_user triggers sparse warnings when used with __bitwise tag (when same tag is on both pointer and value read). I posted a patchset to fix it up by adding __force on all arches that don't already have it (many do), when that's merged these warnings will go away" * tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: virtio_pci: restore module attributes mic/host: fix up virtio 1.0 APIs vringh: update for virtio 1.0 APIs vringh: 64 bit features tools/virtio: add virtio 1.0 in vringh_test tools/virtio: add virtio 1.0 in virtio_test tools/virtio: enable -Werror tools/virtio: 64 bit features tools/virtio: fix vringh test tools/virtio: more stubs virtio: core support for config generation virtio_pci: add VIRTIO_PCI_NO_LEGACY virtio_pci: move probe to common file virtio_pci_common.h: drop VIRTIO_PCI_NO_LEGACY virtio_config: fix virtio_cread_bytes virtio: set VIRTIO_CONFIG_S_FEATURES_OK on restore | 19 December 2014, 04:50:30 UTC |
| c0f486f | Linus Torvalds | 19 December 2014, 04:28:33 UTC | Merge tag 'pm+acpi-3.19-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull more ACPI and power management updates from Rafael Wysocki: "These are regression fixes (leds-gpio, ACPI backlight driver, operating performance points library, ACPI device enumeration messages, cpupower tool), other bug fixes (ACPI EC driver, ACPI device PM), some cleanups in the operating performance points (OPP) framework, continuation of CONFIG_PM_RUNTIME elimination, a couple of minor intel_pstate driver changes, a new MAINTAINERS entry for it and an ACPI fan driver change needed for better support of thermal management in user space. Specifics: - Fix a regression in leds-gpio introduced by a recent commit that inadvertently changed the name of one of the properties used by the driver (Fabio Estevam). - Fix a regression in the ACPI backlight driver introduced by a recent fix that missed one special case that had to be taken into account (Aaron Lu). - Drop the level of some new kernel messages from the ACPI core introduced by a recent commit to KERN_DEBUG which they should have used from the start and drop some other unuseful KERN_ERR messages printed by ACPI (Rafael J Wysocki). - Revert an incorrect commit modifying the cpupower tool (Prarit Bhargava). - Fix two regressions introduced by recent commits in the OPP library and clean up some existing minor issues in that code (Viresh Kumar). - Continue to replace CONFIG_PM_RUNTIME with CONFIG_PM throughout the tree (or drop it where that can be done) in order to make it possible to eliminate CONFIG_PM_RUNTIME (Rafael J Wysocki, Ulf Hansson, Ludovic Desroches). There will be one more "CONFIG_PM_RUNTIME removal" batch after this one, because some new uses of it have been introduced during the current merge window, but that should be sufficient to finally get rid of it. - Make the ACPI EC driver more robust against race conditions related to GPE handler installation failures (Lv Zheng). - Prevent the ACPI device PM core code from attempting to disable GPEs that it has not enabled which confuses ACPICA and makes it report errors unnecessarily (Rafael J Wysocki). - Add a "force" command line switch to the intel_pstate driver to make it possible to override the blacklisting of some systems in that driver if needed (Ethan Zhao). - Improve intel_pstate code documentation and add a MAINTAINERS entry for it (Kristen Carlson Accardi). - Make the ACPI fan driver create cooling device interfaces witn names that reflect the IDs of the ACPI device objects they are associated with, except for "generic" ACPI fans (PNP ID "PNP0C0B"). That's necessary for user space thermal management tools to be able to connect the fans with the parts of the system they are supposed to be cooling properly. From Srinivas Pandruvada" * tag 'pm+acpi-3.19-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (32 commits) MAINTAINERS: add entry for intel_pstate ACPI / video: update the skip case for acpi_video_device_in_dod() power / PM: Eliminate CONFIG_PM_RUNTIME NFC / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM SCSI / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM ACPI / EC: Fix unexpected ec_remove_handlers() invocations Revert "tools: cpupower: fix return checks for sysfs_get_idlestate_count()" tracing / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM x86 / PM: Replace CONFIG_PM_RUNTIME in io_apic.c PM: Remove the SET_PM_RUNTIME_PM_OPS() macro mmc: atmel-mci: use SET_RUNTIME_PM_OPS() macro PM / Kconfig: Replace PM_RUNTIME with PM in dependencies ARM / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM sound / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM phy / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM video / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM tty / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM spi: Replace CONFIG_PM_RUNTIME with CONFIG_PM ACPI / PM: Do not disable wakeup GPEs that have not been enabled ACPI / utils: Drop error messages from acpi_evaluate_reference() ... | 19 December 2014, 04:28:33 UTC |
| 385336e | Linus Torvalds | 19 December 2014, 04:24:55 UTC | Merge tag 'platform-drivers-x86-v3.19-1' of git://git.infradead.org/users/dvhart/linux-platform-drivers-x86 Pull x86 platform driver update from Darren Hart: - thinkpad-acpi: Switch to software mute, cleanups - acerhdf: Bang-bang thermal governor, new models, cleanups - dell-laptop: New keyboard backlight support and documentation - toshiba_acpi: Keyboard backlight updates, hotkey handling - dell-wmi: Keypress filtering, WMI event processing - eeepc-laptop: Multiple cleanups, improved error handling, documentation - hp_wireless: Inform the user if hp_wireless_input_setup()/add() fails - misc: Code cleanups, quirks, various new IDs * tag 'platform-drivers-x86-v3.19-1' of git://git.infradead.org/users/dvhart/linux-platform-drivers-x86: (33 commits) platform/x86/acerhdf: Still depends on THERMAL Documentation: Add entry for dell-laptop sysfs interface acpi: Remove _OSI(Linux) for ThinkPads thinkpad-acpi: Try to use full software mute control acerhdf: minor clean up acerhdf: added critical trip point acerhdf: Use bang-bang thermal governor acerhdf: Adding support for new models acerhdf: Adding support for "manual mode" dell-smo8800: Add more ACPI ids and change description of driver platform: x86: dell-laptop: Add support for keyboard backlight toshiba_acpi: Add keyboard backlight mode change event toshiba_acpi: Change notify funtion to handle more events toshiba_acpi: Move hotkey enabling code to its own function dell-wmi: Don't report keypresses on keybord illumination change dell-wmi: Don't report keypresses for radio state changes hp_wireless: Inform the user if hp_wireless_input_setup()/add() fails toshiba-acpi: Add missing ID (TOS6207) Sony-laptop: Deletion of an unnecessary check before the function call "pci_dev_put" platform: x86: Deletion of checks before backlight_device_unregister() ... | 19 December 2014, 04:24:55 UTC |
| ebcffcd | Linus Torvalds | 19 December 2014, 04:21:32 UTC | Merge git://www.linux-watchdog.org/linux-watchdog Pull small watchdog update from Wim Van Sebroeck: - fix the argument of watchdog_active() in imx2_wdt - Add power management support to the imx2_wdt watchdog. * git://www.linux-watchdog.org/linux-watchdog: watchdog: imx2_wdt: Fix the argument of watchdog_active() watchdog: imx2_wdt: Add power management support. | 19 December 2014, 04:21:32 UTC |
| 0ec28c3 | Linus Torvalds | 19 December 2014, 04:14:49 UTC | Merge tag 'media/v3.19-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media Pull second set of media updates from Mauro Carvalho Chehab: - Move drivers for really old legacy hardware to staging. Those are using obsolete media kAPIs and are for hardware that nobody uses for years. Simply not worth porting them to the new kAPIs. Of course, if anyone pops up to fix, we can move them back from there - While not too late, do some API fixups at the new colorspace API, added for v3.19 - Some improvements for rcar_vin driver - Some fixups at cx88 and vivid drivers - Some Documentation fixups * tag 'media/v3.19-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: [media] bq/c-qcam, w9966, pms: move to staging in preparation for removal [media] tlg2300: move to staging in preparation for removal [media] vino/saa7191: move to staging in preparation for removal [media] MAINTAINERS: vivi -> vivid [media] cx88: remove leftover start_video_dma() call [media] cx88: add missing alloc_ctx support [media] v4l2-ioctl: WARN_ON if querycap didn't fill device_caps [media] vivid: fix CROP_BOUNDS typo for video output [media] DocBook media: update version number and document changes [media] vivid.txt: document new controls [media] DocBook media: add missing ycbcr_enc and quantization fields [media] v4l2-mediabus.h: use two __u16 instead of two __u32 [media] rcar_vin: Fix interrupt enable in progressive [media] rcar_vin: Enable VSYNC field toggle mode [media] rcar_vin: Add scaling support [media] rcar_vin: Add DT support for r8a7793 and r8a7794 SoCs [media] rcar_vin: Add YUYV capture format support | 19 December 2014, 04:14:49 UTC |
| 4c929fe | Linus Torvalds | 19 December 2014, 04:10:44 UTC | Merge tag 'rdma-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband Pull infiniband updates from Roland Dreier: "Main batch of InfiniBand/RDMA changes for 3.19: - On-demand paging support in core midlayer and mlx5 driver. This lets userspace create non-pinned memory regions and have the adapter HW trigger page faults. - iSER and IPoIB updates and fixes. - Low-level HW driver updates for cxgb4, mlx4 and ocrdma. - Other miscellaneous fixes" * tag 'rdma-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband: (56 commits) IB/mlx5: Implement on demand paging by adding support for MMU notifiers IB/mlx5: Add support for RDMA read/write responder page faults IB/mlx5: Handle page faults IB/mlx5: Page faults handling infrastructure IB/mlx5: Add mlx5_ib_update_mtt to update page tables after creation IB/mlx5: Changes in memory region creation to support on-demand paging IB/mlx5: Implement the ODP capability query verb mlx5_core: Add support for page faults events and low level handling mlx5_core: Re-add MLX5_DEV_CAP_FLAG_ON_DMND_PG flag IB/srp: Allow newline separator for connection string IB/core: Implement support for MMU notifiers regarding on demand paging regions IB/core: Add support for on demand paging regions IB/core: Add flags for on demand paging support IB/core: Add support for extended query device caps IB/mlx5: Add function to read WQE from user-space IB/core: Add umem function to read data from user-space IB/core: Replace ib_umem's offset field with a full address IB/mlx5: Enhance UMR support to allow partial page table update IB/mlx5: Remove per-MR pas and dma pointers RDMA/ocrdma: Always resolve destination mac from GRH for UD QPs ... | 19 December 2014, 04:10:44 UTC |
| 018cb13 | Linus Torvalds | 19 December 2014, 03:08:25 UTC | Merge branch 'akpm' (patches from Andrew) Merge misc patches from Andrew Morton: "A few stragglers" * emailed patches from Andrew Morton <akpm@linux-foundation.org>: tools/testing/selftests/Makefile: alphasort the TARGETS list mm/zsmalloc: adjust order of functions ocfs2: fix journal commit deadlock ocfs2/dlm: fix race between dispatched_work and dlm_lockres_grab_inflight_worker ocfs2: reflink: fix slow unlink for refcounted file mm/memory.c:do_shared_fault(): add comment .mailmap: Santosh Shilimkar has moved .mailmap: update akpm@osdl.org lib/show_mem.c: add cma reserved information fs/proc/meminfo.c: include cma info in proc/meminfo mm: cma: split cma-reserved in dmesg log hfsplus: fix longname handling mm/mempolicy.c: remove unnecessary is_valid_nodemask() | 19 December 2014, 03:08:25 UTC |
| 96e869d | Andrew Morton | 19 December 2014, 00:17:43 UTC | tools/testing/selftests/Makefile: alphasort the TARGETS list This list is supposed to be sorted, to reduce patch collisions. Cc: Shuah Khan <shuah.kh@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 19 December 2014, 03:08:11 UTC |
| 66cdef6 | Ganesh Mahendran | 19 December 2014, 00:17:40 UTC | mm/zsmalloc: adjust order of functions Currently functions in zsmalloc.c does not arranged in a readable and reasonable sequence. With the more and more functions added, we may meet below inconvenience. For example: Current functions: void zs_init() { } static void get_maxobj_per_zspage() { } Then I want to add a func_1() which is called from zs_init(), and this new added function func_1() will used get_maxobj_per_zspage() which is defined below zs_init(). void func_1() { get_maxobj_per_zspage() } void zs_init() { func_1() } static void get_maxobj_per_zspage() { } This will cause compiling issue. So we must add a declaration: static void get_maxobj_per_zspage(); before func_1() if we do not put get_maxobj_per_zspage() before func_1(). In addition, puting module_[init|exit] functions at the bottom of the file conforms to our habit. So, this patch ajusts function sequence as: /* helper functions */ ... obj_location_to_handle() ... /* Some exported functions */ ... zs_map_object() zs_unmap_object() zs_malloc() zs_free() zs_init() zs_exit() Signed-off-by: Ganesh Mahendran <opensource.ganesh@gmail.com> Cc: Nitin Gupta <ngupta@vflare.org> Acked-by: Minchan Kim <minchan@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 19 December 2014, 03:08:11 UTC |
| 136f49b | Junxiao Bi | 19 December 2014, 00:17:37 UTC | ocfs2: fix journal commit deadlock For buffer write, page lock will be got in write_begin and released in write_end, in ocfs2_write_end_nolock(), before it unlock the page in ocfs2_free_write_ctxt(), it calls ocfs2_run_deallocs(), this will ask for the read lock of journal->j_trans_barrier. Holding page lock and ask for journal->j_trans_barrier breaks the locking order. This will cause a deadlock with journal commit threads, ocfs2cmt will get write lock of journal->j_trans_barrier first, then it wakes up kjournald2 to do the commit work, at last it waits until done. To commit journal, kjournald2 needs flushing data first, it needs get the cache page lock. Since some ocfs2 cluster locks are holding by write process, this deadlock may hung the whole cluster. unlock pages before ocfs2_run_deallocs() can fix the locking order, also put unlock before ocfs2_commit_trans() to make page lock is unlocked before j_trans_barrier to preserve unlocking order. Signed-off-by: Junxiao Bi <junxiao.bi@oracle.com> Reviewed-by: Wengang Wang <wen.gang.wang@oracle.com> Cc: <stable@vger.kernel.org> Reviewed-by: Mark Fasheh <mfasheh@suse.de> Cc: Joel Becker <jlbec@evilplan.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 19 December 2014, 03:08:11 UTC |
| 1e58958 | Joseph Qi | 19 December 2014, 00:17:34 UTC | ocfs2/dlm: fix race between dispatched_work and dlm_lockres_grab_inflight_worker Commit ac4fef4d23ed ("ocfs2/dlm: do not purge lockres that is queued for assert master") may have the following possible race case: dlm_dispatch_assert_master dlm_wq ======================================================================== queue_work(dlm->quedlm_worker, &dlm->dispatched_work); dispatch work, dlm_lockres_drop_inflight_worker *BUG_ON(res->inflight_assert_workers == 0)* dlm_lockres_grab_inflight_worker inflight_assert_workers++ So ensure inflight_assert_workers to be increased first. Signed-off-by: Joseph Qi <joseph.qi@huawei.com> Signed-off-by: Xue jiufei <xuejiufei@huawei.com> Cc: Joel Becker <jlbec@evilplan.org> Reviewed-by: Mark Fasheh <mfasheh@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 19 December 2014, 03:08:11 UTC |
| f62f12b | Junxiao Bi | 19 December 2014, 00:17:32 UTC | ocfs2: reflink: fix slow unlink for refcounted file When running ocfs2 test suite multiple nodes reflink stress test, for a 4 nodes cluster, every unlink() for refcounted file needs about 700s. The slow unlink is caused by the contention of refcount tree lock since all nodes are unlink files using the same refcount tree. When the unlinking file have many extents(over 1600 in our test), most of the extents has refcounted flag set. In ocfs2_commit_truncate(), it will execute the following call trace for every extents. This means it needs get and released refcount tree lock about 1600 times. And when several nodes are do this at the same time, the performance will be very low. ocfs2_remove_btree_range() -- ocfs2_lock_refcount_tree() ---- ocfs2_refcount_lock() ------ __ocfs2_cluster_lock() ocfs2_refcount_lock() is costly, move it to ocfs2_commit_truncate() to do lock/unlock once can improve a lot performance. Signed-off-by: Junxiao Bi <junxiao.bi@oracle.com> Cc: Wengang <wen.gang.wang@oracle.com> Reviewed-by: Mark Fasheh <mfasheh@suse.de> Cc: Joel Becker <jlbec@evilplan.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 19 December 2014, 03:08:11 UTC |
| d82fa87 | Andrew Morton | 19 December 2014, 00:17:29 UTC | mm/memory.c:do_shared_fault(): add comment Belatedly document the changes in commit f0c6d4d295e4 ("mm: introduce do_shared_fault() and drop do_fault()"). Cc: Andi Kleen <ak@linux.intel.com> Cc: Bob Liu <lliubbo@gmail.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: "Kirill A. Shutemov" <kirill@shutemov.name> Cc: Matthew Wilcox <matthew.r.wilcox@intel.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Cc: Rik van Riel <riel@redhat.com> Cc: Sasha Levin <sasha.levin@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 19 December 2014, 03:08:11 UTC |
| 48332f2 | Santosh Shilimkar | 19 December 2014, 00:17:26 UTC | .mailmap: Santosh Shilimkar has moved Add my new email address along with kernel.org email id Signed-off-by: Santosh Shilimkar <santosh.shilimkar@oracle.com> Signed-off-by: Santosh Shilimkar <ssantosh@kernel.org> Cc: Joe Perches <joe@perches.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 19 December 2014, 03:08:11 UTC |
| 7d19c8f | Andrew Morton | 19 December 2014, 00:17:23 UTC | .mailmap: update akpm@osdl.org Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 19 December 2014, 03:08:11 UTC |
| 49abd8c | Vishnu Pratap Singh | 19 December 2014, 00:17:21 UTC | lib/show_mem.c: add cma reserved information Add cma reserved information which is currently shown as a part of total reserved only. This patch is continuation of our previous cma patches related to this. https://lkml.org/lkml/2014/10/20/64 https://lkml.org/lkml/2014/10/22/383 [akpm@linux-foundation.org: remove hopefully-unneeded ifdefs] Signed-off-by: Vishnu Pratap Singh <vishnu.ps@samsung.com> Cc: David Rientjes <rientjes@google.com> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Xishi Qiu <qiuxishi@huawei.com> Cc: Pintu Kumar <pintu.k@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 19 December 2014, 03:08:10 UTC |
| 47f8f92 | Pintu Kumar | 19 December 2014, 00:17:18 UTC | fs/proc/meminfo.c: include cma info in proc/meminfo This patch include CMA info (CMATotal, CMAFree) in /proc/meminfo. Currently, in a CMA enabled system, if somebody wants to know the total CMA size declared, there is no way to tell, other than the dmesg or /var/log/messages logs. With this patch we are showing the CMA info as part of meminfo, so that it can be determined at any point of time. This will be populated only when CMA is enabled. Below is the sample output from a ARM based device with RAM:512MB and CMA:16MB. MemTotal: 471172 kB MemFree: 111712 kB MemAvailable: 271172 kB . . . CmaTotal: 16384 kB CmaFree: 6144 kB This patch also fix below checkpatch errors that were found during these changes. ERROR: space required after that ',' (ctx:ExV) 199: FILE: fs/proc/meminfo.c:199: + ,atomic_long_read(&num_poisoned_pages) << (PAGE_SHIFT - 10) ^ ERROR: space required after that ',' (ctx:ExV) 202: FILE: fs/proc/meminfo.c:202: + ,K(global_page_state(NR_ANON_TRANSPARENT_HUGEPAGES) * ^ ERROR: space required after that ',' (ctx:ExV) 206: FILE: fs/proc/meminfo.c:206: + ,K(totalcma_pages) ^ total: 3 errors, 0 warnings, 2 checks, 236 lines checked Signed-off-by: Pintu Kumar <pintu.k@samsung.com> Signed-off-by: Vishnu Pratap Singh <vishnu.ps@samsung.com> Acked-by: Michal Nazarewicz <mina86@mina86.com> Cc: Rafael Aquini <aquini@redhat.com> Cc: Jerome Marchand <jmarchan@redhat.com> Cc: Marek Szyprowski <m.szyprowski@samsung.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 19 December 2014, 03:08:10 UTC |
| e48322a | Pintu Kumar | 19 December 2014, 00:17:15 UTC | mm: cma: split cma-reserved in dmesg log When the system boots up, in the dmesg logs we can see the memory statistics along with total reserved as below. Memory: 458840k/458840k available, 65448k reserved, 0K highmem When CMA is enabled, still the total reserved memory remains the same. However, the CMA memory is not considered as reserved. But, when we see /proc/meminfo, the CMA memory is part of free memory. This creates confusion. This patch corrects the problem by properly subtracting the CMA reserved memory from the total reserved memory in dmesg logs. Below is the dmesg snapshot from an arm based device with 512MB RAM and 12MB single CMA region. Before this change: Memory: 458840k/458840k available, 65448k reserved, 0K highmem After this change: Memory: 458840k/458840k available, 53160k reserved, 12288k cma-reserved, 0K highmem Signed-off-by: Pintu Kumar <pintu.k@samsung.com> Signed-off-by: Vishnu Pratap Singh <vishnu.ps@samsung.com> Acked-by: Michal Nazarewicz <mina86@mina86.com> Cc: Rafael Aquini <aquini@redhat.com> Cc: Jerome Marchand <jmarchan@redhat.com> Cc: Marek Szyprowski <m.szyprowski@samsung.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 19 December 2014, 03:08:10 UTC |
| 89ac9b4 | Sougata Santra | 19 December 2014, 00:17:12 UTC | hfsplus: fix longname handling Longname is not correctly handled by hfsplus driver. If an attempt to create a longname(>255) file/directory is made, it succeeds by creating a file/directory with HFSPLUS_MAX_STRLEN and incorrect catalog key. Thus leaving the volume in an inconsistent state. This patch fixes this issue. Although lookup is always called first to create a negative entry, so just doing a check in lookup would probably fix this issue. I choose to propagate error to other iops as well. Please NOTE: I have factored out hfsplus_cat_build_key_with_cnid from hfsplus_cat_build_key, to avoid unncessary branching. Thanks a lot. TEST: ------ dir="TEST_DIR" cdir=`pwd` name255="_123456789_123456789_123456789_123456789_123456789_123456789\ _123456789_123456789_123456789_123456789_123456789_123456789_123456789\ _123456789_123456789_123456789_123456789_123456789_123456789_123456789\ _123456789_123456789_123456789_123456789_123456789_1234" name256="${name255}5" mkdir $dir cd $dir touch $name255 rm -f $name255 touch $name256 ls -la cd $cdir rm -rf $dir RESULT: ------- [sougata@ultrabook tmp]$ cdir=`pwd` [sougata@ultrabook tmp]$ name255="_123456789_123456789_123456789_123456789_123456789_123456789\ > _123456789_123456789_123456789_123456789_123456789_123456789_123456789\ > _123456789_123456789_123456789_123456789_123456789_123456789_123456789\ > _123456789_123456789_123456789_123456789_123456789_1234" [sougata@ultrabook tmp]$ name256="${name255}5" [sougata@ultrabook tmp]$ [sougata@ultrabook tmp]$ mkdir $dir [sougata@ultrabook tmp]$ cd $dir [sougata@ultrabook TEST_DIR]$ touch $name255 [sougata@ultrabook TEST_DIR]$ rm -f $name255 [sougata@ultrabook TEST_DIR]$ touch $name256 [sougata@ultrabook TEST_DIR]$ ls -la ls: cannot access _123456789_123456789_123456789_123456789_123456789_123456789_123456789_123456789_123456789_123456789_123456789_123456789_123456789_123456789_123456789_123456789_123456789_123456789_123456789_123456789_123456789_123456789_123456789_123456789_123456789_1234: No such file or directory total 0 drwxrwxr-x 1 sougata sougata 3 Feb 20 19:56 . drwxrwxrwx 1 root root 6 Feb 20 19:56 .. -????????? ? ? ? ? ? _123456789_123456789_123456789_123456789_123456789_123456789_123456789_123456789_123456789_123456789_123456789_123456789_123456789_123456789_123456789_123456789_123456789_123456789_123456789_123456789_123456789_123456789_123456789_123456789_123456789_1234 [sougata@ultrabook TEST_DIR]$ cd $cdir [sougata@ultrabook tmp]$ rm -rf $dir rm: cannot remove `TEST_DIR': Directory not empty -ENAMETOOLONG returned from hfsplus_asc2uni was not propaged to iops. This allowed hfsplus to create files/directories with HFSPLUS_MAX_STRLEN and incorrect keys, leaving the FS in an inconsistent state. This patch fixes this issue. Signed-off-by: Sougata Santra <sougata@tuxera.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Cc: Vyacheslav Dubeyko <slava@dubeyko.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 19 December 2014, 03:08:10 UTC |
| 859f7ef | Zhihui Zhang | 19 December 2014, 00:17:09 UTC | mm/mempolicy.c: remove unnecessary is_valid_nodemask() When nodes is true, nsc->mask2 has already been filtered by nsc->mask1, which has already factored in node_states[N_MEMORY]. Signed-off-by: Zhihui Zhang <zzhsuny@gmail.com> Cc: Mel Gorman <mel@csn.ul.ie> Cc: Oleg Nesterov <oleg@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 19 December 2014, 03:08:10 UTC |
| 00c845d | Linus Torvalds | 19 December 2014, 00:41:13 UTC | Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net Pull networking fixes from David Miller: 1) Fix NBMA tunnel mac header handling in GRE, from Timo Teräs. 2) Fix a NAPI race in the fec driver, from Nimrod Andy. 3) The new IFF_VNET_LE bit is outside the size of the flags member it is stored in (which is 16-bits), store the state locally in the drivers. From Michael S Tsirkin. 4) We are kicking the tires with the new wireless maintainership situation. Bluetooth fixes via Johan Hedberg, and mac80211 fixes from Johannes Berg. 5) Fix locking and leaks in geneve driver, from Jesse Gross. 6) Make netlink TX mmap code always copy, so we don't have to be potentially exposed to the user changing the underlying contents from underneath us. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (63 commits) be2net: Fix incorrect setting of tunnel offload flag in netdev features bnx2x: fix typos in "configure" xen-netback: support frontends without feature-rx-notify again MAINTAINERS: changes for wireless cxgb4: Fix decoding QSA module for ethtool get settings geneve: Fix races between socket add and release. geneve: Remove socket and offload handlers at destruction. netlink: Don't reorder loads/stores before marking mmap netlink frame as available netlink: Always copy on mmap TX. Bluetooth: Fix bug with filter in service discovery optimization mac80211: free management frame keys when removing station net: Disallow providing non zero VLAN ID for NIC drivers FDB add flow net/mlx4: Cache line CQE/EQE stride fixes net: fec: Fix NAPI race xen-netfront: use napi_complete() correctly to prevent Rx stalling ip_tunnel: Add missing validation of encap type to ip_tunnel_encap_setup() ip_tunnel: Add sanity checks to ip_tunnel_encap_add_ops() net: Allow FIXED_PHY to be modular. if_tun: drop broken IFF_VNET_LE macvtap: drop broken IFF_VNET_LE ... | 19 December 2014, 00:41:13 UTC |
| 28ee580 | Linus Torvalds | 19 December 2014, 00:32:11 UTC | Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc Pull sparc fix from David Miller: "Sparc32 locking bug fix from Andreas Larsson" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc: sparc32: destroy_context() and switch_mm() needs to disable interrupts. | 19 December 2014, 00:32:11 UTC |
| 22943a6 | Linus Torvalds | 19 December 2014, 00:26:41 UTC | Merge tag 'arc-3.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc Pull arch/arc updates from Vineet Gupta: "Minor updates for ARC for 3.19" * tag 'arc-3.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc: ARC: rename default defconfig ARC: [nsimosci] move peripherals to match model to FPGA ARC: document memory clobber in irq control macros ARC: R-M-W assist locks only needed for !LLSC ARC: add power management options | 19 December 2014, 00:26:41 UTC |
| 39757e7 | Linus Torvalds | 19 December 2014, 00:13:40 UTC | Merge tag 'nios2-fixes-v3.19' of git://git.rocketboards.org/linux-socfpga-next Pull arch/nios2 fixes from Ley Foon Tan: - add definition of ioremap_wc to io.h to fix build error from make allmodconfig - fix make defconfig - fix sparse error * tag 'nios2-fixes-v3.19' of git://git.rocketboards.org/linux-socfpga-next: nios2/uaccess: fix sparse errors nios2: enable "make defconfig" nios2: add definition of ioremap_wc to io.h | 19 December 2014, 00:13:40 UTC |
| 66dcff8 | Linus Torvalds | 19 December 2014, 00:05:28 UTC | Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm Pull KVM update from Paolo Bonzini: "3.19 changes for KVM: - spring cleaning: removed support for IA64, and for hardware- assisted virtualization on the PPC970 - ARM, PPC, s390 all had only small fixes For x86: - small performance improvements (though only on weird guests) - usual round of hardware-compliancy fixes from Nadav - APICv fixes - XSAVES support for hosts and guests. XSAVES hosts were broken because the (non-KVM) XSAVES patches inadvertently changed the KVM userspace ABI whenever XSAVES was enabled; hence, this part is going to stable. Guest support is just a matter of exposing the feature and CPUID leaves support" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (179 commits) KVM: move APIC types to arch/x86/ KVM: PPC: Book3S: Enable in-kernel XICS emulation by default KVM: PPC: Book3S HV: Improve H_CONFER implementation KVM: PPC: Book3S HV: Fix endianness of instruction obtained from HEIR register KVM: PPC: Book3S HV: Remove code for PPC970 processors KVM: PPC: Book3S HV: Tracepoints for KVM HV guest interactions KVM: PPC: Book3S HV: Simplify locking around stolen time calculations arch: powerpc: kvm: book3s_paired_singles.c: Remove unused function arch: powerpc: kvm: book3s_pr.c: Remove unused function arch: powerpc: kvm: book3s.c: Remove some unused functions arch: powerpc: kvm: book3s_32_mmu.c: Remove unused function KVM: PPC: Book3S HV: Check wait conditions before sleeping in kvmppc_vcore_blocked KVM: PPC: Book3S HV: ptes are big endian KVM: PPC: Book3S HV: Fix inaccuracies in ICP emulation for H_IPI KVM: PPC: Book3S HV: Fix KSM memory corruption KVM: PPC: Book3S HV: Fix an issue where guest is paused on receiving HMI KVM: PPC: Book3S HV: Fix computation of tlbie operand KVM: PPC: Book3S HV: Add missing HPTE unlock KVM: PPC: BookE: Improve irq inject tracepoint arm/arm64: KVM: Require in-kernel vgic for the arch timers ... | 19 December 2014, 00:05:28 UTC |
| 91ed9e8 | Alexander Graf | 18 December 2014, 09:17:08 UTC | KVM: PPC: E500: Compile fix in this_cpu_write Commit 69111bac42f5 ("powerpc: Replace __get_cpu_var uses") introduced compile breakage to the e500 target by introducing invalid automatically created C syntax. Fix up the breakage and make the code compile again. Signed-off-by: Alexander Graf <agraf@suse.de> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 19 December 2014, 00:02:26 UTC |
| 86c8fc4 | David S. Miller | 18 December 2014, 20:33:49 UTC | Merge tag 'mac80211-for-davem-2014-12-18' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211 Johannes Berg says: ==================== pull-request: mac80211 2014-12-18 Also from me a first pull request - we have a number of really old issues that happened to crop up now with new work (or just more testing) in the right areas as well as some small bugs newly introduced in 3.19. Let me know if there are any problems. ==================== Signed-off-by: David S. Miller <davem@davemloft.net> | 18 December 2014, 20:33:49 UTC |
| 7dce675 | David S. Miller | 18 December 2014, 20:32:27 UTC | Merge branch 'for-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth Johan Hedberg says: ==================== pull request: bluetooth 2014-12-17 Here's the first direct (i.e. skipping the wireless tree) bluetooth pull request for you, intended for 3.19. It's just one patch: a fix from Marcel for for remote service discovery filtering which also fixes a 'used uninitialized' compiler warning. Please let me know if there are any issues pulling. Thanks. ==================== Signed-off-by: David S. Miller <davem@davemloft.net> | 18 December 2014, 20:32:27 UTC |
| c297abf | Eric W. Biederman | 18 December 2014, 16:57:19 UTC | mnt: Fix a memory stomp in umount While reviewing the code of umount_tree I realized that when we append to a preexisting unmounted list we do not change pprev of the former first item in the list. Which means later in namespace_unlock hlist_del_init(&mnt->mnt_hash) on the former first item of the list will stomp unmounted.first leaving it set to some random mount point which we are likely to free soon. This isn't likely to hit, but if it does I don't know how anyone could track it down. [ This happened because we don't have all the same operations for hlist's as we do for normal doubly-linked lists. In particular, list_splice() is easy on our standard doubly-linked lists, while hlist_splice() doesn't exist and needs both start/end entries of the hlist. And commit 38129a13e6e7 incorrectly open-coded that missing hlist_splice(). We should think about making these kinds of "mindless" conversions easier to get right by adding the missing hlist helpers - Linus ] Fixes: 38129a13e6e71f666e0468e99fdd932a687b4d7e switch mnt_hash to hlist Cc: stable@vger.kernel.org Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 18 December 2014, 19:22:02 UTC |
| ac9a3d8 | Sriharsha Basavapatna | 19 December 2014, 04:30:18 UTC | be2net: Fix incorrect setting of tunnel offload flag in netdev features An earlier commit to resolve an issue with encapsulation offloads missed setting a bit in the outer netdev features flag. This results in loss of TSO feature on a VxLAN interface. Fixes: 630f4b70 ("Export tunnel offloads only when a VxLAN tunnel is created") Signed-off-by: Sriharsha Basavapatna <sriharsha.basavapatna@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 18 December 2014, 17:51:29 UTC |
| bf27c35 | Jiri Benc | 18 December 2014, 08:04:35 UTC | bnx2x: fix typos in "configure" Noticed when debugging ptp. Signed-off-by: Jiri Benc <jbenc@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 18 December 2014, 17:50:36 UTC |
| 26c0e10 | David Vrabel | 18 December 2014, 11:13:06 UTC | xen-netback: support frontends without feature-rx-notify again Commit bc96f648df1bbc2729abbb84513cf4f64273a1f1 (xen-netback: make feature-rx-notify mandatory) incorrectly assumed that there were no frontends in use that did not support this feature. But the frontend driver in MiniOS does not and since this is used by (qemu) stubdoms, these stopped working. Netback sort of works as-is in this mode except: - If there are no Rx requests and the internal Rx queue fills, only the drain timeout will wake the thread. The default drain timeout of 10 s would give unacceptable pauses. - If an Rx stall was detected and the internal Rx queue is drained, then the Rx thread would never wake. Handle these two cases (when feature-rx-notify is disabled) by: - Reducing the drain timeout to 30 ms. - Disabling Rx stall detection. Reported-by: John <jw@nuclearfallout.net> Tested-by: John <jw@nuclearfallout.net> Signed-off-by: David Vrabel <david.vrabel@citrix.com> Reviewed-by: Wei Liu <wei.liu2@citrix.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 18 December 2014, 17:49:49 UTC |
| 66d0f7e | Andreas Larsson | 18 December 2014, 12:23:23 UTC | sparc32: destroy_context() and switch_mm() needs to disable interrupts. Load balancing can be triggered in the critical sections protected by srmmu_context_spinlock in destroy_context() and switch_mm() and can hang the cpu waiting for the rq lock of another cpu that in turn has called switch_mm hangning on srmmu_context_spinlock leading to deadlock. So, disable interrupt while taking srmmu_context_spinlock in destroy_context() and switch_mm() so we don't deadlock. See also commit 77b838fa1ef0 ("[SPARC64]: destroy_context() needs to disable interrupts.") Signed-off-by: Andreas Larsson <andreas@gaisler.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 18 December 2014, 17:47:54 UTC |
| 2ec1c17 | Rafael J. Wysocki | 18 December 2014, 17:44:53 UTC | Merge branches 'pm-opp', 'pm-cpufreq' and 'pm-tools' * pm-opp: PM / OPP: do error handling at the bottom of dev_pm_opp_add_dynamic() PM / OPP: handle allocation of device_opp in a separate routine PM / OPP: reuse find_device_opp() instead of duplicating code PM / OPP: Staticize __dev_pm_opp_remove() PM / OPP: replace kfree with kfree_rcu while freeing 'struct device_opp' * pm-cpufreq: MAINTAINERS: add entry for intel_pstate intel_pstate: Add a few comments intel_pstate: add kernel parameter to force loading * pm-tools: Revert "tools: cpupower: fix return checks for sysfs_get_idlestate_count()" | 18 December 2014, 17:44:53 UTC |
| 035f10e | Rafael J. Wysocki | 18 December 2014, 17:44:05 UTC | Merge branch 'pm-runtime' * pm-runtime: power / PM: Eliminate CONFIG_PM_RUNTIME NFC / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM SCSI / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM tracing / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM x86 / PM: Replace CONFIG_PM_RUNTIME in io_apic.c PM: Remove the SET_PM_RUNTIME_PM_OPS() macro mmc: atmel-mci: use SET_RUNTIME_PM_OPS() macro PM / Kconfig: Replace PM_RUNTIME with PM in dependencies ARM / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM sound / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM phy / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM video / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM tty / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM spi: Replace CONFIG_PM_RUNTIME with CONFIG_PM | 18 December 2014, 17:44:05 UTC |
| 0a06664 | Rafael J. Wysocki | 18 December 2014, 17:43:16 UTC | Merge branches 'acpi-fan', 'acpi-video' and 'acpi-ec' * acpi-fan: ACPI / Fan: Use bus id as the name for non PNP0C0B (Fan) devices * acpi-video: ACPI / video: update the skip case for acpi_video_device_in_dod() * acpi-ec: ACPI / EC: Fix unexpected ec_remove_handlers() invocations | 18 December 2014, 17:43:16 UTC |
| be10f60 | Rafael J. Wysocki | 18 December 2014, 17:42:56 UTC | Merge branches 'acpi-scan', 'acpi-utils' and 'acpi-pm' * acpi-scan: ACPI / scan: Change the level of _DEP-related messages to KERN_DEBUG * acpi-utils: ACPI / utils: Drop error messages from acpi_evaluate_reference() * acpi-pm: ACPI / PM: Do not disable wakeup GPEs that have not been enabled | 18 December 2014, 17:42:56 UTC |
| 0e324cf | John W. Linville | 17 December 2014, 17:07:05 UTC | MAINTAINERS: changes for wireless http://marc.info/?l=linux-wireless&m=141883202530292&w=2 This makes it official... :-) Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 18 December 2014, 17:41:12 UTC |
| 5aa80e5 | Hariprasad Shenai | 17 December 2014, 12:06:00 UTC | cxgb4: Fix decoding QSA module for ethtool get settings QSA module was getting decoded as QSFP module in ethtool get settings, this patch fixes it. Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 18 December 2014, 17:39:16 UTC |
| 1206940 | Jesse Gross | 17 December 2014, 02:25:32 UTC | geneve: Fix races between socket add and release. Currently, searching for a socket to add a reference to is not synchronized with deletion of sockets. This can result in use after free if there is another operation that is removing a socket at the same time. Solving this requires both holding the appropriate lock and checking the refcount to ensure that it has not already hit zero. Inspired by a related (but not exactly the same) issue in the VXLAN driver. Fixes: 0b5e8b8e ("net: Add Geneve tunneling protocol driver") CC: Andy Zhou <azhou@nicira.com> Signed-off-by: Jesse Gross <jesse@nicira.com> Acked-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net> | 18 December 2014, 17:38:13 UTC |
| 7ed767f | Jesse Gross | 17 December 2014, 02:25:31 UTC | geneve: Remove socket and offload handlers at destruction. Sockets aren't currently removed from the the global list when they are destroyed. In addition, offload handlers need to be cleaned up as well. Fixes: 0b5e8b8e ("net: Add Geneve tunneling protocol driver") CC: Andy Zhou <azhou@nicira.com> Signed-off-by: Jesse Gross <jesse@nicira.com> Acked-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net> | 18 December 2014, 17:38:13 UTC |
| a18e6a1 | Thomas Graf | 18 December 2014, 10:30:26 UTC | netlink: Don't reorder loads/stores before marking mmap netlink frame as available Each mmap Netlink frame contains a status field which indicates whether the frame is unused, reserved, contains data or needs to be skipped. Both loads and stores may not be reordeded and must complete before the status field is changed and another CPU might pick up the frame for use. Use an smp_mb() to cover needs of both types of callers to netlink_set_status(), callers which have been reading data frame from the frame, and callers which have been filling or releasing and thus writing to the frame. - Example code path requiring a smp_rmb(): memcpy(skb->data, (void *)hdr + NL_MMAP_HDRLEN, hdr->nm_len); netlink_set_status(hdr, NL_MMAP_STATUS_UNUSED); - Example code path requiring a smp_wmb(): hdr->nm_uid = from_kuid(sk_user_ns(sk), NETLINK_CB(skb).creds.uid); hdr->nm_gid = from_kgid(sk_user_ns(sk), NETLINK_CB(skb).creds.gid); netlink_frame_flush_dcache(hdr); netlink_set_status(hdr, NL_MMAP_STATUS_VALID); Fixes: f9c228 ("netlink: implement memory mapped recvmsg()") Reported-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net> | 18 December 2014, 17:35:55 UTC |
| 4682a03 | David Miller | 16 December 2014, 22:58:17 UTC | netlink: Always copy on mmap TX. Checking the file f_count and the nlk->mapped count is not completely sufficient to prevent the mmap'd area contents from changing from under us during netlink mmap sendmsg() operations. Be careful to sample the header's length field only once, because this could change from under us as well. Fixes: 5fd96123ee19 ("netlink: implement memory mapped sendmsg()") Signed-off-by: David S. Miller <davem@davemloft.net> Acked-by: Daniel Borkmann <dborkman@redhat.com> Acked-by: Thomas Graf <tgraf@suug.ch> | 18 December 2014, 17:35:23 UTC |
| ba90f26 | Fabio Estevam | 16 December 2014, 00:49:59 UTC | watchdog: imx2_wdt: Fix the argument of watchdog_active() Fix the following build warning by passing the expected argument type to watchdog_active(): drivers/watchdog/imx2_wdt.c: In function 'imx2_wdt_suspend': drivers/watchdog/imx2_wdt.c:340:2: warning: passing argument 1 of 'watchdog_active' from incompatible pointer type [enabled by default] In file included from drivers/watchdog/imx2_wdt.c:38:0: include/linux/watchdog.h:104:20: note: expected 'struct watchdog_device *' but argument is of type 'struct watchdog_device **' Reported-by: Olof's autobuilder <build@lixom.net> Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be> | 18 December 2014, 15:01:20 UTC |
| aefbaf3 | Xiubo Li | 22 September 2014, 10:00:52 UTC | watchdog: imx2_wdt: Add power management support. Add power management operations(suspend and resume) as part of dev_pm_ops for IMX2 watchdog driver. Signed-off-by: Xiubo Li <Li.Xiubo@freescale.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be> | 18 December 2014, 15:01:14 UTC |
| 2c4aa55 | Paolo Bonzini | 18 December 2014, 08:39:55 UTC | Merge tag 'signed-kvm-ppc-next' of git://github.com/agraf/linux-2.6 into HEAD Patch queue for ppc - 2014-12-18 Highights this time around: - Removal of HV support for 970. It became a maintenance burden and received practically no testing. POWER8 with HV is available now, so just grab one of those boxes if PR isn't enough for you. - Some bug fixes and performance improvements - Tracepoints for book3s_hv | 18 December 2014, 08:39:55 UTC |
| cb5281a | Paolo Bonzini | 17 December 2014, 17:17:20 UTC | KVM: move APIC types to arch/x86/ They are not used anymore by IA64, move them away. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> | 18 December 2014, 08:39:51 UTC |
| 44e8967 | Linus Torvalds | 18 December 2014, 02:47:01 UTC | Ceph: remove left-over reject file Neither Sage nor I noticed that Zheng Yan had mistakenly committed fs/ceph/super.h.rej as part of commit 31c542a199d7 ("ceph: add inline data to pagecache"). Remove it. Requested-by: Yan, Zheng <ukernel@gmail.com> Cc: Sage Weil <sweil@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 18 December 2014, 02:47:01 UTC |
| b0a65b0 | Kees Cook | 12 December 2014, 03:06:49 UTC | param: do not set store func without write perm When a module_param is defined without DAC write permissions, it can still be changed at runtime and updated. Drivers using a 0444 permission may be surprised that these values can still be changed. For drivers that want to allow updates, any S_IW* flag will set the "store" function as before. Drivers without S_IW* flags will have the "store" function unset, unforcing a read-only value. Drivers that wish neither "store" nor "get" can continue to use "0" for perms to stay out of sysfs entirely. Old behavior: # cd /sys/module/snd/parameters # ls -l total 0 -r--r--r-- 1 root root 4096 Dec 11 13:55 cards_limit -r--r--r-- 1 root root 4096 Dec 11 13:55 major -r--r--r-- 1 root root 4096 Dec 11 13:55 slots # cat major 116 # echo -1 > major -bash: major: Permission denied # chmod u+w major # echo -1 > major # cat major -1 New behavior: ... # chmod u+w major # echo -1 > major -bash: echo: write error: Input/output error Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> | 18 December 2014, 02:08:51 UTC |
| 5766650 | Linus Torvalds | 18 December 2014, 00:03:12 UTC | Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client Pull ceph updates from Sage Weil: "The big item here is support for inline data for CephFS and for message signatures from Zheng. There are also several bug fixes, including interrupted flock request handling, 0-length xattrs, mksnap, cached readdir results, and a message version compat field. Finally there are several cleanups from Ilya, Dan, and Markus. Note that there is another series coming soon that fixes some bugs in the RBD 'lingering' requests, but it isn't quite ready yet" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client: (27 commits) ceph: fix setting empty extended attribute ceph: fix mksnap crash ceph: do_sync is never initialized libceph: fixup includes in pagelist.h ceph: support inline data feature ceph: flush inline version ceph: convert inline data to normal data before data write ceph: sync read inline data ceph: fetch inline data when getting Fcr cap refs ceph: use getattr request to fetch inline data ceph: add inline data to pagecache ceph: parse inline data in MClientReply and MClientCaps libceph: specify position of extent operation libceph: add CREATE osd operation support libceph: add SETXATTR/CMPXATTR osd operations support rbd: don't treat CEPH_OSD_OP_DELETE as extent op ceph: remove unused stringification macros libceph: require cephx message signature by default ceph: introduce global empty snap context ceph: message versioning fixes ... | 18 December 2014, 00:03:12 UTC |
| 476ce5e | Anton Blanchard | 03 December 2014, 02:30:42 UTC | KVM: PPC: Book3S: Enable in-kernel XICS emulation by default The in-kernel XICS emulation is faster than doing it all in QEMU and it has got a lot of testing, so enable it by default. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Paul Mackerras <paulus@samba.org> Signed-off-by: Alexander Graf <agraf@suse.de> | 17 December 2014, 21:23:22 UTC |
| 87c31b3 | Linus Torvalds | 17 December 2014, 20:31:40 UTC | Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace Pull user namespace related fixes from Eric Biederman: "As these are bug fixes almost all of thes changes are marked for backporting to stable. The first change (implicitly adding MNT_NODEV on remount) addresses a regression that was created when security issues with unprivileged remount were closed. I go on to update the remount test to make it easy to detect if this issue reoccurs. Then there are a handful of mount and umount related fixes. Then half of the changes deal with the a recently discovered design bug in the permission checks of gid_map. Unix since the beginning has allowed setting group permissions on files to less than the user and other permissions (aka ---rwx---rwx). As the unix permission checks stop as soon as a group matches, and setgroups allows setting groups that can not later be dropped, results in a situtation where it is possible to legitimately use a group to assign fewer privileges to a process. Which means dropping a group can increase a processes privileges. The fix I have adopted is that gid_map is now no longer writable without privilege unless the new file /proc/self/setgroups has been set to permanently disable setgroups. The bulk of user namespace using applications even the applications using applications using user namespaces without privilege remain unaffected by this change. Unfortunately this ix breaks a couple user space applications, that were relying on the problematic behavior (one of which was tools/selftests/mount/unprivileged-remount-test.c). To hopefully prevent needing a regression fix on top of my security fix I rounded folks who work with the container implementations mostly like to be affected and encouraged them to test the changes. > So far nothing broke on my libvirt-lxc test bed. :-) > Tested with openSUSE 13.2 and libvirt 1.2.9. > Tested-by: Richard Weinberger <richard@nod.at> > Tested on Fedora20 with libvirt 1.2.11, works fine. > Tested-by: Chen Hanxiao <chenhanxiao@cn.fujitsu.com> > Ok, thanks - yes, unprivileged lxc is working fine with your kernels. > Just to be sure I was testing the right thing I also tested using > my unprivileged nsexec testcases, and they failed on setgroup/setgid > as now expected, and succeeded there without your patches. > Tested-by: Serge Hallyn <serge.hallyn@ubuntu.com> > I tested this with Sandstorm. It breaks as is and it works if I add > the setgroups thing. > Tested-by: Andy Lutomirski <luto@amacapital.net> # breaks things as designed :(" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace: userns: Unbreak the unprivileged remount tests userns; Correct the comment in map_write userns: Allow setting gid_maps without privilege when setgroups is disabled userns: Add a knob to disable setgroups on a per user namespace basis userns: Rename id_map_mutex to userns_state_mutex userns: Only allow the creator of the userns unprivileged mappings userns: Check euid no fsuid when establishing an unprivileged uid mapping userns: Don't allow unprivileged creation of gid mappings userns: Don't allow setgroups until a gid mapping has been setablished userns: Document what the invariant required for safe unprivileged mappings. groups: Consolidate the setgroups permission checks mnt: Clear mnt_expire during pivot_root mnt: Carefully set CL_UNPRIVILEGED in clone_mnt mnt: Move the clear of MNT_LOCKED from copy_tree to it's callers. umount: Do not allow unmounting rootfs. umount: Disallow unprivileged mount force mnt: Update unprivileged remount test mnt: Implicitly add MNT_NODEV on remount when it was implicitly added by mount | 17 December 2014, 20:31:40 UTC |
| ea8ae25 | Marcel Holtmann | 17 December 2014, 17:18:08 UTC | Bluetooth: Fix bug with filter in service discovery optimization The optimization for filtering out extended inquiry results, advertising reports or scan response data based on provided UUID list has a logic bug. In case no match is found in the advertising data, the scan response is ignored and not checked against the filter. This will lead to events being filtered wrongly. Change the code to actually only drop the events when the scan response data is not present. If it is present, it needs to be checked against the provided filter. The patch is a bit more complex than it needs to be. That is because it also fixes this compiler warning that some gcc versions produce. CC net/bluetooth/mgmt.o net/bluetooth/mgmt.c: In function ‘mgmt_device_found’: net/bluetooth/mgmt.c:7028:7: warning: ‘match’ may be used uninitialized in this function [-Wmaybe-uninitialized] bool match; ^ It seems that gcc can not clearly figure out the context of the match variable. So just change the branches for the extended inquiry response and advertising data around so that it is clear. Reported-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> | 17 December 2014, 20:03:49 UTC |
| f045bbb | Linus Torvalds | 17 December 2014, 19:59:04 UTC | mmu_gather: fix over-eager tlb_flush_mmu_free() calling Dave Hansen reports that commit fb7332a9fedf ("mmu_gather: move minimal range calculations into generic code") caused a performance problem: "tlb_finish_mmu() goes up about 9x in the profiles (~0.4%->3.6%) and tlb_flush_mmu_free() takes about 3.1% of CPU time with the patch applied, but does not show up at all on the commit before" and the reason is that Will moved the test for whether we need to flush from tlb_flush_mmu() into tlb_flush_mmu_tlbonly(). But that meant that tlb_flush_mmu_free() basically lost that check. Move it back into tlb_flush_mmu() where it belongs, so that it covers both tlb_flush_mmu_tlbonly() _and_ tlb_flush_mmu_free(). Reported-and-tested-by: Dave Hansen <dave@sr71.net> Acked-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 17 December 2014, 19:59:04 UTC |
| cf3c0a1 | Linus Torvalds | 17 December 2014, 19:52:37 UTC | x86: mm: fix VM_FAULT_RETRY handling My commit 26178ec11ef3 ("x86: mm: consolidate VM_FAULT_RETRY handling") had a really stupid typo: the FAULT_FLAG_USER bit is in the 'flags' variable, not the 'fault' variable. Duh, The one silver lining in this is that Dave finding this at least confirms that trinity actually triggers this special path easily, in a way normal use does not. Reported-by: Dave Jones <davej@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 17 December 2014, 19:52:37 UTC |
| cc66974 | Linus Torvalds | 17 December 2014, 18:44:22 UTC | Merge tag 'vfio-v3.19-rc1' of git://github.com/awilliam/linux-vfio Pull VFIO updates from Alex Williamson: - s390 support (Frank Blaschka) - Enable iommu-type1 for ARM SMMU (Will Deacon) * tag 'vfio-v3.19-rc1' of git://github.com/awilliam/linux-vfio: drivers/vfio: allow type-1 IOMMU instantiation on top of an ARM SMMU vfio: make vfio run on s390 | 17 December 2014, 18:44:22 UTC |
| 9f3e151 | Linus Torvalds | 17 December 2014, 18:37:56 UTC | Merge tag 'virtio-next-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux Pull virtio updates from Rusty Russell: "A balloon enhancement, and a minor race-on-module-unload theoretical bug which doesn't merit cc: stable. All the exciting stuff went via MST this cycle" * tag 'virtio-next-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux: virtio_balloon: free some memory from balloon on OOM virtio_balloon: return the amount of freed memory from leak_balloon() virtio_blk: fix race at module removal virtio: Fix comment typo 'CONFIG_S_FAILED' | 17 December 2014, 18:37:56 UTC |
| 2efda90 | Linus Torvalds | 17 December 2014, 18:16:27 UTC | Merge branch 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux Pull thermal management update from Zhang Rui: "Summary: - of-thermal extension to allow drivers to register and use its functionality in a better way, without exploiting thermal core. From Lukasz Majewski. - Fix a bug in intel_soc_dts_thermal driver which calls a sleep function in interrupt handler. From Maurice Petallo. - add a thermal UAPI header file for exporting the thermal generic netlink information to user-space. From Florian Fainelli. - First round of refactoring in Exynos driver. Bartlomiej and Lukasz are attempting to make it lean and easier to understand. - New thermal driver for Rockchip (rk3288), with support for DT thermal. From Caesar Wang. - New thermal driver for Nvidia, Tegra124 SOCTHERM driver, with support for DT thermal. From Mikko Perttunen. - New cooling device, based on common clock framework. From Eduardo Valentin. - a couple of small fixes in thermal core framework. From Srinivas Pandruvada, Javi Merino, Luis Henriques. - Dropping Armada A375-Z1 SoC thermal support as the chip is not in the market, armada folks decided to drop its support. - a couple of small fixes and cleanups in int340x thermal driver" * 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux: (58 commits) thermal: provide an UAPI header file Thermal/int340x: Clear the error value of the last acpi_bus_get_device() call thermal/powerclamp: add id for braswell cpu thermal: Intel SoC DTS: Don't do thermal zone update inside spin_lock Thermal: fix platform_no_drv_owner.cocci warnings Thermal/int340x: avoid unnecessary pointer casting thermal: int3403: Delete a check before thermal_zone_device_unregister() thermal/int3400: export uuids thermal: of: Extend current of-thermal.c code to allow setting emulated temp thermal: of: Extend of-thermal to export table of trip points thermal: of: Rename struct __thermal_trip to struct thermal_trip thermal: of: Extend of-thermal.c to provide check if trip point is valid thermal: of: Extend of-thermal.c to provide number of trip points thermal: Fix error path in thermal_init() thermal: lock the thermal zone when switching governors thermal: core: ignore invalid trip temperature thermal: armada: Remove support for A375-Z1 SoC thermal: rockchip: add driver for thermal dt-bindings: document Rockchip thermal thermal: exynos: remove exynos_tmu_data.h include ... | 17 December 2014, 18:16:27 UTC |
| 0b4954c | Linus Torvalds | 17 December 2014, 18:10:51 UTC | Merge tag 'pwm/for-3.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm Pull pwm updates from Thierry Reding: "There are two new drivers, one for the BCM2835 (Raspberry Pi) and one used in conjunction with the LCD controller on various Atmel SoCs. The Samsung PWM driver can now be built for 64-bit ARM (Exynos7). A couple of fixes have been applied to the FTM PWM driver and system sleep support was added" * tag 'pwm/for-3.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm: pwm: atmel-hlcdc: add at91sam9x5 and sama5d3 errata handling pwm: ftm: Add Power Management support for FTM PWM pwm: ftm: Add regmap rbtree type cache support pwm: ftm: Correctly track usage count pwm: samsung: Allow Samsung PWM driver to be enabled on Exynos7 pwm: add DT bindings documentation for atmel-hlcdc-pwm driver pwm: add support for atmel-hlcdc-pwm device pwm: Add BCM2835 PWM driver | 17 December 2014, 18:10:51 UTC |
| d797da4 | Linus Torvalds | 17 December 2014, 18:06:02 UTC | Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Pull input subsystem updates from Dmitry Torokhov: "Two new drivers for Elan hardware (for I2C touchpad and touchscreen found in several Chromebooks and other devices), a driver for Goodix touch panel, and small fixes to Cypress I2C trackpad and other input drivers. Also we switched to use __maybe_unused instead of gating suspend/ resume code with #ifdef guards to get better compile coverage" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (27 commits) Input: gpio_keys - fix warning regarding uninitialized 'button' variable Input: add support for Elan eKTH I2C touchscreens Input: gpio_keys - fix warning regarding uninitialized 'irq' variable Input: cyapa - use 'error' for error codes Input: cyapa - fix resuming the device Input: gpio_keys - add device tree support for interrupt only keys Input: amikbd - allocate temporary keymap buffer on the stack Input: amikbd - fix build if !CONFIG_HW_CONSOLE Input: lm8323 - missing error check in lm8323_set_disable() Input: initialize device counter variables with -1 Input: initialize input_no to -1 to avoid subtraction Input: i8042 - do not try to load on Intel NUC D54250WYK Input: atkbd - correct MSC_SCAN events for force_release keys Input: cyapa - switch to using managed resources Input: lifebook - use "static inline" instead of "inline" in lifebook.h Input: touchscreen - use __maybe_unused instead of ifdef around suspend/resume Input: mouse - use __maybe_unused instead of ifdef around suspend/resume Input: misc - use __maybe_unused instead of ifdef around suspend/resume Input: cap11xx - support for irq-active-high option Input: cap11xx - add support for various cap11xx devices ... | 17 December 2014, 18:06:02 UTC |
| d6666be | Linus Torvalds | 17 December 2014, 17:59:26 UTC | Merge tag 'for-linus-20141215' of git://git.infradead.org/linux-mtd Pull MTD updates from Brian Norris: "Summary: - Add device tree support for DoC3 - SPI NOR: Refactoring, for better layering between spi-nor.c and its driver users (e.g., m25p80.c) New flash device support Support 6-byte ID strings - NAND: New NAND driver for Allwinner SoC's (sunxi) GPMI NAND: add support for raw (no ECC) access, for testing purposes Add ATO manufacturer ID A few odd driver fixes - MTD tests: Allow testers to compensate for OOB bitflips in oobtest Fix a torturetest regression - nandsim: Support longer ID byte strings And more" * tag 'for-linus-20141215' of git://git.infradead.org/linux-mtd: (63 commits) mtd: tests: abort torturetest on erase errors mtd: physmap_of: fix potential NULL dereference mtd: spi-nor: allow NULL as chip name and try to auto detect it mtd: nand: gpmi: add raw oob access functions mtd: nand: gpmi: add proper raw access support mtd: nand: gpmi: add gpmi_copy_bits function mtd: spi-nor: factor out write_enable() for erase commands mtd: spi-nor: add support for s25fl128s mtd: spi-nor: remove the jedec_id/ext_id mtd: spi-nor: add id/id_len for flash_info{} mtd: nand: correct the comment of function nand_block_isreserved() jffs2: Drop bogus if in comment mtd: atmel_nand: replace memcpy32_toio/memcpy32_fromio with memcpy mtd: cafe_nand: drop duplicate .write_page implementation mtd: m25p80: Add support for serial flash Spansion S25FL132K MTD: m25p80: fix inconsistency in m25p_ids compared to spi_nor_ids mtd: spi-nor: improve wait-till-ready timeout loop mtd: delete unnecessary checks before two function calls mtd: nand: omap: Fix NAND enumeration on 3430 LDP mtd: nand: add ATO manufacturer info ... | 17 December 2014, 17:59:26 UTC |
| 0ea90b9 | Linus Torvalds | 17 December 2014, 17:54:05 UTC | Merge tag 'microblaze-3.19-rc1' of git://git.monstr.eu/linux-2.6-microblaze Pull Microblaze fix from Michal Simek: "Fix mmap for cache coherent memory" * tag 'microblaze-3.19-rc1' of git://git.monstr.eu/linux-2.6-microblaze: microblaze: Fix mmap for cache coherent memory | 17 December 2014, 17:54:05 UTC |
| 5f5425e | Linus Torvalds | 17 December 2014, 17:52:49 UTC | Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security Pull security subsystem fixes from James Morris. * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security: KEYS: remove a bogus NULL check ima: Fix build failure on powerpc when TCG_IBMVTPM dependencies are not met KEYS: Fix stale key registration at error path | 17 December 2014, 17:52:49 UTC |
| c103b21 | Linus Torvalds | 17 December 2014, 17:41:32 UTC | Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse Pull fuse update from Miklos Szeredi: "The first part makes sure we don't hold up umount with pending async requests. In addition to being a cleanup, this is a small behavioral change (for the better) and unlikely to break anything. The second part prepares for a cleanup of the fuse device I/O code by adding a helper for simple request submission, with some savings in line numbers already realized" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse: fuse: use file_inode() in fuse_file_fallocate() fuse: introduce fuse_simple_request() helper fuse: reduce max out args fuse: hold inode instead of path after release fuse: flush requests on umount fuse: don't wake up reserved req in fuse_conn_kill() | 17 December 2014, 17:41:32 UTC |
| 0aeff37 | Yan, Zheng | 17 December 2014, 13:26:47 UTC | ceph: fix setting empty extended attribute make sure 'value' is not null. otherwise __ceph_setxattr will remove the extended attribute. Signed-off-by: Yan, Zheng <zyan@redhat.com> Reviewed-by: Sage Weil <sage@redhat.com> | 17 December 2014, 17:18:49 UTC |
| 275dd19 | Yan, Zheng | 10 December 2014, 08:17:31 UTC | ceph: fix mksnap crash mksnap reply only contain 'target', does not contain 'dentry'. So it's wrong to use req->r_reply_info.head->is_dentry to detect traceless reply. Signed-off-by: Yan, Zheng <zyan@redhat.com> Reviewed-by: Sage Weil <sage@redhat.com> | 17 December 2014, 17:09:53 UTC |
| 021b77b | Dan Carpenter | 28 November 2014, 08:33:34 UTC | ceph: do_sync is never initialized Probably this code was syncing a lot more often then intended because the do_sync variable wasn't set to zero. Cc: stable@vger.kernel.org # v3.11+ Fixes: c62988ec0910 ('ceph: avoid meaningless calling ceph_caps_revoking if sync_mode == WB_SYNC_ALL.') Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Ilya Dryomov <idryomov@redhat.com> | 17 December 2014, 17:09:53 UTC |
