https://github.com/torvalds/linux
Revision 4d272f90a780f6545e46ba715c8961afa23511f3 authored by Linus Torvalds on 17 March 2015, 17:36:01 UTC, committed by Linus Torvalds on 17 March 2015, 17:36:01 UTC
Pull virtio fixes from Rusty Russell:
 "Not entirely surprising: the ongoing QEMU work on virtio 1.0 has
  revealed more minor issues with our virtio 1.0 drivers just introduced
  in the kernel.

  (I would normally use my fixes branch for this, but there were a batch
  of them...)"

* tag 'virtio-next-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux:
  virtio_mmio: fix access width for mmio
  uapi/virtio_scsi: allow overriding CDB/SENSE size
  virtio_mmio: generation support
  virtio_rpmsg: set DRIVER_OK before using device
  9p/trans_virtio: fix hot-unplug
  virtio-balloon: do not call blocking ops when !TASK_RUNNING
  virtio_blk: fix comment for virtio 1.0
  virtio_blk: typo fix
  virtio_balloon: set DRIVER_OK before using device
  virtio_console: avoid config access from irq
  virtio_console: init work unconditionally
2 parent s 2fc6775 + 704a0b5
Raw File
Tip revision: 4d272f90a780f6545e46ba715c8961afa23511f3 authored by Linus Torvalds on 17 March 2015, 17:36:01 UTC
Merge tag 'virtio-next-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux
Tip revision: 4d272f9
VGA-softcursor.txt
Software cursor for VGA    by Pavel Machek <pavel@atrey.karlin.mff.cuni.cz>
=======================    and Martin Mares <mj@atrey.karlin.mff.cuni.cz>

   Linux now has some ability to manipulate cursor appearance. Normally, you
can set the size of hardware cursor (and also work around some ugly bugs in
those miserable Trident cards--see #define TRIDENT_GLITCH in drivers/video/
vgacon.c). You can now play a few new tricks:  you can make your cursor look
like a non-blinking red block, make it inverse background of the character it's
over or to highlight that character and still choose whether the original
hardware cursor should remain visible or not.  There may be other things I have
never thought of.

   The cursor appearance is controlled by a "<ESC>[?1;2;3c" escape sequence
where 1, 2 and 3 are parameters described below. If you omit any of them,
they will default to zeroes.

   Parameter 1 specifies cursor size (0=default, 1=invisible, 2=underline, ...,
8=full block) + 16 if you want the software cursor to be applied + 32 if you
want to always change the background color + 64 if you dislike having the
background the same as the foreground.  Highlights are ignored for the last two
flags.

   The second parameter selects character attribute bits you want to change
(by simply XORing them with the value of this parameter). On standard VGA,
the high four bits specify background and the low four the foreground. In both
groups, low three bits set color (as in normal color codes used by the console)
and the most significant one turns on highlight (or sometimes blinking--it
depends on the configuration of your VGA).

   The third parameter consists of character attribute bits you want to set.
Bit setting takes place before bit toggling, so you can simply clear a bit by 
including it in both the set mask and the toggle mask.

Examples:
=========

To get normal blinking underline, use: echo -e '\033[?2c'
To get blinking block, use:            echo -e '\033[?6c'
To get red non-blinking block, use:    echo -e '\033[?17;0;64c'
back to top