Revision 4d59b6ccf000862beed6fc0765d3209f98a8d8a2 authored by Tejun Heo on 08 February 2017, 22:30:56 UTC, committed by Linus Torvalds on 08 February 2017, 23:41:43 UTC
Commit 513e3d2d11c9 ("cpumask: always use nr_cpu_ids in formatting and parsing functions") converted both cpumask printing and parsing functions to use nr_cpu_ids instead of nr_cpumask_bits. While this was okay for the printing functions as it just picked one of the two output formats that we were alternating between depending on a kernel config, doing the same for parsing wasn't okay. nr_cpumask_bits can be either nr_cpu_ids or NR_CPUS. We can always use nr_cpu_ids but that is a variable while NR_CPUS is a constant, so it can be more efficient to use NR_CPUS when we can get away with it. Converting the printing functions to nr_cpu_ids makes sense because it affects how the masks get presented to userspace and doesn't break anything; however, using nr_cpu_ids for parsing functions can incorrectly leave the higher bits uninitialized while reading in these masks from userland. As all testing and comparison functions use nr_cpumask_bits which can be larger than nr_cpu_ids, the parsed cpumasks can erroneously yield false negative results. This made the taskstats interface incorrectly return -EINVAL even when the inputs were correct. Fix it by restoring the parse functions to use nr_cpumask_bits instead of nr_cpu_ids. Link: http://lkml.kernel.org/r/20170206182442.GB31078@htj.duckdns.org Fixes: 513e3d2d11c9 ("cpumask: always use nr_cpu_ids in formatting and parsing functions") Signed-off-by: Tejun Heo <tj@kernel.org> Reported-by: Martin Steigerwald <martin.steigerwald@teamix.de> Debugged-by: Ben Hutchings <ben.hutchings@codethink.co.uk> Cc: <stable@vger.kernel.org> [4.0+] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
1 parent 0911d00
Kconfig
menuconfig SOUND
tristate "Sound card support"
depends on HAS_IOMEM
help
If you have a sound card in your computer, i.e. if it can say more
than an occasional beep, say Y. Be sure to have all the information
about your sound card and its configuration down (I/O port,
interrupt and DMA channel), because you will be asked for it.
You want to read the Sound-HOWTO, available from
<http://www.tldp.org/docs.html#howto>. General information about
the modular sound system is contained in the files
<file:Documentation/sound/oss/Introduction>. The file
<file:Documentation/sound/oss/README.OSS> contains some slightly
outdated but still useful information as well. Newer sound
driver documentation is found in <file:Documentation/sound/alsa/*>.
If you have a PnP sound card and you want to configure it at boot
time using the ISA PnP tools (read
<http://www.roestock.demon.co.uk/isapnptools/>), then you need to
compile the sound card support as a module and load that module
after the PnP configuration is finished. To do this, choose M here
and read <file:Documentation/sound/oss/README.modules>; the module
will be called soundcore.
if SOUND
config SOUND_OSS_CORE
bool
default n
config SOUND_OSS_CORE_PRECLAIM
bool "Preclaim OSS device numbers"
depends on SOUND_OSS_CORE
default y
help
With this option enabled, the kernel will claim all OSS device
numbers if any OSS support (native or emulation) is enabled
whether the respective module is loaded or not and try to load the
appropriate module using sound-slot/service-* and char-major-*
module aliases when one of the device numbers is opened. With
this option disabled, kernel will only claim actually in-use
device numbers and opening a missing device will generate only the
standard char-major-* aliases.
The only visible difference is use of additional module aliases
and whether OSS sound devices appear multiple times in
/proc/devices. sound-slot/service-* module aliases are scheduled
to be removed (ie. PRECLAIM won't be available) and this option is
to make the transition easier. This option can be overridden
during boot using the kernel parameter soundcore.preclaim_oss.
Disabling this allows alternative OSS implementations.
If unsure, say Y.
source "sound/oss/dmasound/Kconfig"
if !M68K && !UML
menuconfig SND
tristate "Advanced Linux Sound Architecture"
help
Say 'Y' or 'M' to enable ALSA (Advanced Linux Sound Architecture),
the new base sound system.
For more information, see <http://www.alsa-project.org/>
if SND
source "sound/core/Kconfig"
source "sound/drivers/Kconfig"
source "sound/isa/Kconfig"
source "sound/pci/Kconfig"
source "sound/hda/Kconfig"
source "sound/ppc/Kconfig"
source "sound/aoa/Kconfig"
source "sound/arm/Kconfig"
source "sound/atmel/Kconfig"
source "sound/spi/Kconfig"
source "sound/mips/Kconfig"
source "sound/sh/Kconfig"
# the following will depend on the order of config.
# here assuming USB is defined before ALSA
source "sound/usb/Kconfig"
source "sound/firewire/Kconfig"
# the following will depend on the order of config.
# here assuming PCMCIA is defined before ALSA
source "sound/pcmcia/Kconfig"
source "sound/sparc/Kconfig"
source "sound/parisc/Kconfig"
source "sound/soc/Kconfig"
endif # SND
menuconfig SOUND_PRIME
tristate "Open Sound System (DEPRECATED)"
select SOUND_OSS_CORE
help
Say 'Y' or 'M' to enable Open Sound System drivers.
if SOUND_PRIME
source "sound/oss/Kconfig"
endif # SOUND_PRIME
endif # !M68K
endif # SOUND
# AC97_BUS is used from both sound and ucb1400
config AC97_BUS
tristate
help
This is used to avoid config and link hard dependencies between the
sound subsystem and other function drivers completely unrelated to
sound although they're sharing the AC97 bus. Concerned drivers
should "select" this.
![swh spinner](/static/img/swh-spinner.gif)
Computing file changes ...