Revision 4d5cda069b3f0a3bbc18576bc15903ed665d0295 authored by Hugh Dickins on 02 December 2005, 15:58:09 UTC, committed by James Bottomley on 02 December 2005, 16:24:22 UTC
sg's st_map_user_pages is modelled on an earlier version of st's
sgl_map_user_pages, and has the same bug: if get_user_pages got some but
not all of the pages, then those got were released, but the positive res
code returned implied that they were still to be freed.

Signed-off-by: Hugh Dickins <hugh@veritas.com>
Signed-off-by: Douglas Gilbert <dougg@torque.net>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
1 parent 032c09d
Raw File
gscd.c
#define GSCD_VERSION "0.4a Oliver Raupach <raupach@nwfs1.rz.fh-hannover.de>"

/*
	linux/drivers/block/gscd.c - GoldStar R420 CDROM driver

        Copyright (C) 1995  Oliver Raupach <raupach@nwfs1.rz.fh-hannover.de>
        based upon pre-works by   Eberhard Moenkeberg <emoenke@gwdg.de>
        

        For all kind of other information about the GoldStar CDROM
        and this Linux device driver I installed a WWW-URL:
        http://linux.rz.fh-hannover.de/~raupach        


             If you are the editor of a Linux CD, you should
             enable gscd.c within your boot floppy kernel and
             send me one of your CDs for free.


        --------------------------------------------------------------------
	This program is free software; you can redistribute it and/or modify
	it under the terms of the GNU General Public License as published by
	the Free Software Foundation; either version 2, or (at your option)
	any later version.

	This program is distributed in the hope that it will be useful,
	but WITHOUT ANY WARRANTY; without even the implied warranty of
	MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
	GNU General Public License for more details.

	You should have received a copy of the GNU General Public License
	along with this program; if not, write to the Free Software
	Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
	
	--------------------------------------------------------------------
	
	9 November 1999 -- Make kernel-parameter implementation work with 2.3.x 
	                   Removed init_module & cleanup_module in favor of 
		   	   module_init & module_exit.
			   Torben Mathiasen <tmm@image.dk>

*/

/* These settings are for various debug-level. Leave they untouched ... */
#define  NO_GSCD_DEBUG
#define  NO_IOCTL_DEBUG
#define  NO_MODULE_DEBUG
#define  NO_FUTURE_WORK
/*------------------------*/

#include <linux/module.h>

#include <linux/slab.h>
#include <linux/errno.h>
#include <linux/signal.h>
#include <linux/sched.h>
#include <linux/timer.h>
#include <linux/fs.h>
#include <linux/mm.h>
#include <linux/kernel.h>
#include <linux/cdrom.h>
#include <linux/ioport.h>
#include <linux/major.h>
#include <linux/string.h>
#include <linux/init.h>

#include <asm/system.h>
#include <asm/io.h>
#include <asm/uaccess.h>

#define MAJOR_NR GOLDSTAR_CDROM_MAJOR
#include <linux/blkdev.h>
#include "gscd.h"

static int gscdPresent = 0;

static unsigned char gscd_buf[2048];	/* buffer for block size conversion */
static int gscd_bn = -1;
static short gscd_port = GSCD_BASE_ADDR;
module_param_named(gscd, gscd_port, short, 0);

/* Kommt spaeter vielleicht noch mal dran ...
 *    static DECLARE_WAIT_QUEUE_HEAD(gscd_waitq);
 */

static void gscd_read_cmd(struct request *req);
static void gscd_hsg2msf(long hsg, struct msf *msf);
static void gscd_bin2bcd(unsigned char *p);

/* Schnittstellen zum Kern/FS */

static void __do_gscd_request(unsigned long dummy);
static int gscd_ioctl(struct inode *, struct file *, unsigned int,
		      unsigned long);
static int gscd_open(struct inode *, struct file *);
static int gscd_release(struct inode *, struct file *);
static int check_gscd_med_chg(struct gendisk *disk);

/*      GoldStar Funktionen    */

static void cmd_out(int, char *, char *, int);
static void cmd_status(void);
static void init_cd_drive(int);

static int get_status(void);
static void clear_Audio(void);
static void cc_invalidate(void);

/* some things for the next version */
#ifdef FUTURE_WORK
static void update_state(void);
static long gscd_msf2hsg(struct msf *mp);
static int gscd_bcd2bin(unsigned char bcd);
#endif


/*      lo-level cmd-Funktionen    */

static void cmd_info_in(char *, int);
static void cmd_end(void);
static void cmd_read_b(char *, int, int);
static void cmd_read_w(char *, int, int);
static int cmd_unit_alive(void);
static void cmd_write_cmd(char *);


/*      GoldStar Variablen     */

static int curr_drv_state;
static int drv_states[] = { 0, 0, 0, 0, 0, 0, 0, 0 };
static int drv_mode;
static int disk_state;
static int speed;
static int ndrives;

static unsigned char drv_num_read;
static unsigned char f_dsk_valid;
static unsigned char current_drive;
static unsigned char f_drv_ok;


static char f_AudioPlay;
static char f_AudioPause;
static int AudioStart_m;
static int AudioStart_f;
static int AudioEnd_m;
static int AudioEnd_f;

static DEFINE_TIMER(gscd_timer, NULL, 0, 0);
static DEFINE_SPINLOCK(gscd_lock);
static struct request_queue *gscd_queue;

static struct block_device_operations gscd_fops = {
	.owner		= THIS_MODULE,
	.open		= gscd_open,
	.release	= gscd_release,
	.ioctl		= gscd_ioctl,
	.media_changed	= check_gscd_med_chg,
};

/* 
 * Checking if the media has been changed
 * (not yet implemented)
 */
static int check_gscd_med_chg(struct gendisk *disk)
{
#ifdef GSCD_DEBUG
	printk("gscd: check_med_change\n");
#endif
	return 0;
}


#ifndef MODULE
/* Using new interface for kernel-parameters */

static int __init gscd_setup(char *str)
{
	int ints[2];
	(void) get_options(str, ARRAY_SIZE(ints), ints);

	if (ints[0] > 0) {
		gscd_port = ints[1];
	}
	return 1;
}

__setup("gscd=", gscd_setup);

#endif

static int gscd_ioctl(struct inode *ip, struct file *fp, unsigned int cmd,
		      unsigned long arg)
{
	unsigned char to_do[10];
	unsigned char dummy;


	switch (cmd) {
	case CDROMSTART:	/* Spin up the drive */
		/* Don't think we can do this.  Even if we could,
		 * I think the drive times out and stops after a while
		 * anyway.  For now, ignore it.
		 */
		return 0;

	case CDROMRESUME:	/* keine Ahnung was das ist */
		return 0;


	case CDROMEJECT:
		cmd_status();
		to_do[0] = CMD_TRAY_CTL;
		cmd_out(TYPE_INFO, (char *) &to_do, (char *) &dummy, 0);

		return 0;

	default:
		return -EINVAL;
	}

}


/*
 * Take care of the different block sizes between cdrom and Linux.
 * When Linux gets variable block sizes this will probably go away.
 */

static void gscd_transfer(struct request *req)
{
	while (req->nr_sectors > 0 && gscd_bn == req->sector / 4) {
		long offs = (req->sector & 3) * 512;
		memcpy(req->buffer, gscd_buf + offs, 512);
		req->nr_sectors--;
		req->sector++;
		req->buffer += 512;
	}
}


/*
 * I/O request routine called from Linux kernel.
 */

static void do_gscd_request(request_queue_t * q)
{
	__do_gscd_request(0);
}

static void __do_gscd_request(unsigned long dummy)
{
	struct request *req;
	unsigned int block;
	unsigned int nsect;

repeat:
	req = elv_next_request(gscd_queue);
	if (!req)
		return;

	block = req->sector;
	nsect = req->nr_sectors;

	if (req->sector == -1)
		goto out;

	if (req->cmd != READ) {
		printk("GSCD: bad cmd %lu\n", rq_data_dir(req));
		end_request(req, 0);
		goto repeat;
	}

	gscd_transfer(req);

	/* if we satisfied the request from the buffer, we're done. */

	if (req->nr_sectors == 0) {
		end_request(req, 1);
		goto repeat;
	}
#ifdef GSCD_DEBUG
	printk("GSCD: block %d, nsect %d\n", block, nsect);
#endif
	gscd_read_cmd(req);
out:
	return;
}



/*
 * Check the result of the set-mode command.  On success, send the
 * read-data command.
 */

static void gscd_read_cmd(struct request *req)
{
	long block;
	struct gscd_Play_msf gscdcmd;
	char cmd[] = { CMD_READ, 0x80, 0, 0, 0, 0, 1 };	/* cmd mode M-S-F secth sectl */

	cmd_status();
	if (disk_state & (ST_NO_DISK | ST_DOOR_OPEN)) {
		printk("GSCD: no disk or door open\n");
		end_request(req, 0);
	} else {
		if (disk_state & ST_INVALID) {
			printk("GSCD: disk invalid\n");
			end_request(req, 0);
		} else {
			gscd_bn = -1;	/* purge our buffer */
			block = req->sector / 4;
			gscd_hsg2msf(block, &gscdcmd.start);	/* cvt to msf format */

			cmd[2] = gscdcmd.start.min;
			cmd[3] = gscdcmd.start.sec;
			cmd[4] = gscdcmd.start.frame;

#ifdef GSCD_DEBUG
			printk("GSCD: read msf %d:%d:%d\n", cmd[2], cmd[3],
			       cmd[4]);
#endif
			cmd_out(TYPE_DATA, (char *) &cmd,
				(char *) &gscd_buf[0], 1);

			gscd_bn = req->sector / 4;
			gscd_transfer(req);
			end_request(req, 1);
		}
	}
	SET_TIMER(__do_gscd_request, 1);
}


/*
 * Open the device special file.  Check that a disk is in.
 */

static int gscd_open(struct inode *ip, struct file *fp)
{
	int st;

#ifdef GSCD_DEBUG
	printk("GSCD: open\n");
#endif

	if (gscdPresent == 0)
		return -ENXIO;	/* no hardware */

	get_status();
	st = disk_state & (ST_NO_DISK | ST_DOOR_OPEN);
	if (st) {
		printk("GSCD: no disk or door open\n");
		return -ENXIO;
	}

/*	if (updateToc() < 0)
		return -EIO;
*/

	return 0;
}


/*
 * On close, we flush all gscd blocks from the buffer cache.
 */

static int gscd_release(struct inode *inode, struct file *file)
{

#ifdef GSCD_DEBUG
	printk("GSCD: release\n");
#endif

	gscd_bn = -1;

	return 0;
}


static int get_status(void)
{
	int status;

	cmd_status();
	status = disk_state & (ST_x08 | ST_x04 | ST_INVALID | ST_x01);

	if (status == (ST_x08 | ST_x04 | ST_INVALID | ST_x01)) {
		cc_invalidate();
		return 1;
	} else {
		return 0;
	}
}


static void cc_invalidate(void)
{
	drv_num_read = 0xFF;
	f_dsk_valid = 0xFF;
	current_drive = 0xFF;
	f_drv_ok = 0xFF;

	clear_Audio();

}

static void clear_Audio(void)
{

	f_AudioPlay = 0;
	f_AudioPause = 0;
	AudioStart_m = 0;
	AudioStart_f = 0;
	AudioEnd_m = 0;
	AudioEnd_f = 0;

}

/*
 *   waiting ?  
 */

static int wait_drv_ready(void)
{
	int found, read;

	do {
		found = inb(GSCDPORT(0));
		found &= 0x0f;
		read = inb(GSCDPORT(0));
		read &= 0x0f;
	} while (read != found);

#ifdef GSCD_DEBUG
	printk("Wait for: %d\n", read);
#endif

	return read;
}

static void cc_Ident(char *respons)
{
	char to_do[] = { CMD_IDENT, 0, 0 };

	cmd_out(TYPE_INFO, (char *) &to_do, (char *) respons, (int) 0x1E);

}

static void cc_SetSpeed(void)
{
	char to_do[] = { CMD_SETSPEED, 0, 0 };
	char dummy;

	if (speed > 0) {
		to_do[1] = speed & 0x0F;
		cmd_out(TYPE_INFO, (char *) &to_do, (char *) &dummy, 0);
	}
}

static void cc_Reset(void)
{
	char to_do[] = { CMD_RESET, 0 };
	char dummy;

	cmd_out(TYPE_INFO, (char *) &to_do, (char *) &dummy, 0);
}

static void cmd_status(void)
{
	char to_do[] = { CMD_STATUS, 0 };
	char dummy;

	cmd_out(TYPE_INFO, (char *) &to_do, (char *) &dummy, 0);

#ifdef GSCD_DEBUG
	printk("GSCD: Status: %d\n", disk_state);
#endif

}

static void cmd_out(int cmd_type, char *cmd, char *respo_buf, int respo_count)
{
	int result;


	result = wait_drv_ready();
	if (result != drv_mode) {
		unsigned long test_loops = 0xFFFF;
		int i, dummy;

		outb(curr_drv_state, GSCDPORT(0));

		/* LOCLOOP_170 */
		do {
			result = wait_drv_ready();
			test_loops--;
		} while ((result != drv_mode) && (test_loops > 0));

		if (result != drv_mode) {
			disk_state = ST_x08 | ST_x04 | ST_INVALID;
			return;
		}

		/* ...and waiting */
		for (i = 1, dummy = 1; i < 0xFFFF; i++) {
			dummy *= i;
		}
	}

	/* LOC_172 */
	/* check the unit */
	/* and wake it up */
	if (cmd_unit_alive() != 0x08) {
		/* LOC_174 */
		/* game over for this unit */
		disk_state = ST_x08 | ST_x04 | ST_INVALID;
		return;
	}

	/* LOC_176 */
#ifdef GSCD_DEBUG
	printk("LOC_176 ");
#endif
	if (drv_mode == 0x09) {
		/* magic... */
		printk("GSCD: magic ...\n");
		outb(result, GSCDPORT(2));
	}

	/* write the command to the drive */
	cmd_write_cmd(cmd);

	/* LOC_178 */
	for (;;) {
		result = wait_drv_ready();
		if (result != drv_mode) {
			/* LOC_179 */
			if (result == 0x04) {	/* Mode 4 */
				/* LOC_205 */
#ifdef GSCD_DEBUG
				printk("LOC_205 ");
#endif
				disk_state = inb(GSCDPORT(2));

				do {
					result = wait_drv_ready();
				} while (result != drv_mode);
				return;

			} else {
				if (result == 0x06) {	/* Mode 6 */
					/* LOC_181 */
#ifdef GSCD_DEBUG
					printk("LOC_181 ");
#endif

					if (cmd_type == TYPE_DATA) {
						/* read data */
						/* LOC_184 */
						if (drv_mode == 9) {
							/* read the data to the buffer (word) */

							/* (*(cmd+1))?(CD_FRAMESIZE/2):(CD_FRAMESIZE_RAW/2) */
							cmd_read_w
							    (respo_buf,
							     respo_count,
							     CD_FRAMESIZE /
							     2);
							return;
						} else {
							/* read the data to the buffer (byte) */

							/* (*(cmd+1))?(CD_FRAMESIZE):(CD_FRAMESIZE_RAW)    */
							cmd_read_b
							    (respo_buf,
							     respo_count,
							     CD_FRAMESIZE);
							return;
						}
					} else {
						/* read the info to the buffer */
						cmd_info_in(respo_buf,
							    respo_count);
						return;
					}

					return;
				}
			}

		} else {
			disk_state = ST_x08 | ST_x04 | ST_INVALID;
			return;
		}
	}			/* for (;;) */


#ifdef GSCD_DEBUG
	printk("\n");
#endif
}


static void cmd_write_cmd(char *pstr)
{
	int i, j;

	/* LOC_177 */
#ifdef GSCD_DEBUG
	printk("LOC_177 ");
#endif

	/* calculate the number of parameter */
	j = *pstr & 0x0F;

	/* shift it out */
	for (i = 0; i < j; i++) {
		outb(*pstr, GSCDPORT(2));
		pstr++;
	}
}


static int cmd_unit_alive(void)
{
	int result;
	unsigned long max_test_loops;


	/* LOC_172 */
#ifdef GSCD_DEBUG
	printk("LOC_172 ");
#endif

	outb(curr_drv_state, GSCDPORT(0));
	max_test_loops = 0xFFFF;

	do {
		result = wait_drv_ready();
		max_test_loops--;
	} while ((result != 0x08) && (max_test_loops > 0));

	return result;
}


static void cmd_info_in(char *pb, int count)
{
	int result;
	char read;


	/* read info */
	/* LOC_182 */
#ifdef GSCD_DEBUG
	printk("LOC_182 ");
#endif

	do {
		read = inb(GSCDPORT(2));
		if (count > 0) {
			*pb = read;
			pb++;
			count--;
		}

		/* LOC_183 */
		do {
			result = wait_drv_ready();
		} while (result == 0x0E);
	} while (result == 6);

	cmd_end();
	return;
}


static void cmd_read_b(char *pb, int count, int size)
{
	int result;
	int i;


	/* LOC_188 */
	/* LOC_189 */
#ifdef GSCD_DEBUG
	printk("LOC_189 ");
#endif

	do {
		do {
			result = wait_drv_ready();
		} while (result != 6 || result == 0x0E);

		if (result != 6) {
			cmd_end();
			return;
		}
#ifdef GSCD_DEBUG
		printk("LOC_191 ");
#endif

		for (i = 0; i < size; i++) {
			*pb = inb(GSCDPORT(2));
			pb++;
		}
		count--;
	} while (count > 0);

	cmd_end();
	return;
}


static void cmd_end(void)
{
	int result;


	/* LOC_204 */
#ifdef GSCD_DEBUG
	printk("LOC_204 ");
#endif

	do {
		result = wait_drv_ready();
		if (result == drv_mode) {
			return;
		}
	} while (result != 4);

	/* LOC_205 */
#ifdef GSCD_DEBUG
	printk("LOC_205 ");
#endif

	disk_state = inb(GSCDPORT(2));

	do {
		result = wait_drv_ready();
	} while (result != drv_mode);
	return;

}


static void cmd_read_w(char *pb, int count, int size)
{
	int result;
	int i;


#ifdef GSCD_DEBUG
	printk("LOC_185 ");
#endif

	do {
		/* LOC_185 */
		do {
			result = wait_drv_ready();
		} while (result != 6 || result == 0x0E);

		if (result != 6) {
			cmd_end();
			return;
		}

		for (i = 0; i < size; i++) {
			/* na, hier muss ich noch mal drueber nachdenken */
			*pb = inw(GSCDPORT(2));
			pb++;
		}
		count--;
	} while (count > 0);

	cmd_end();
	return;
}

static int __init find_drives(void)
{
	int *pdrv;
	int drvnum;
	int subdrv;
	int i;

	speed = 0;
	pdrv = (int *) &drv_states;
	curr_drv_state = 0xFE;
	subdrv = 0;
	drvnum = 0;

	for (i = 0; i < 8; i++) {
		subdrv++;
		cmd_status();
		disk_state &= ST_x08 | ST_x04 | ST_INVALID | ST_x01;
		if (disk_state != (ST_x08 | ST_x04 | ST_INVALID)) {
			/* LOC_240 */
			*pdrv = curr_drv_state;
			init_cd_drive(drvnum);
			pdrv++;
			drvnum++;
		} else {
			if (subdrv < 2) {
				continue;
			} else {
				subdrv = 0;
			}
		}

/*       curr_drv_state<<1;         <-- das geht irgendwie nicht */
/* muss heissen:    curr_drv_state <<= 1; (ist ja Wert-Zuweisung) */
		curr_drv_state *= 2;
		curr_drv_state |= 1;
#ifdef GSCD_DEBUG
		printk("DriveState: %d\n", curr_drv_state);
#endif
	}

	ndrives = drvnum;
	return drvnum;
}

static void __init init_cd_drive(int num)
{
	char resp[50];
	int i;

	printk("GSCD: init unit %d\n", num);
	cc_Ident((char *) &resp);

	printk("GSCD: identification: ");
	for (i = 0; i < 0x1E; i++) {
		printk("%c", resp[i]);
	}
	printk("\n");

	cc_SetSpeed();

}

#ifdef FUTURE_WORK
/* return_done */
static void update_state(void)
{
	unsigned int AX;


	if ((disk_state & (ST_x08 | ST_x04 | ST_INVALID | ST_x01)) == 0) {
		if (disk_state == (ST_x08 | ST_x04 | ST_INVALID)) {
			AX = ST_INVALID;
		}

		if ((disk_state & (ST_x08 | ST_x04 | ST_INVALID | ST_x01))
		    == 0) {
			invalidate();
			f_drv_ok = 0;
		}

		AX |= 0x8000;
	}

	if (disk_state & ST_PLAYING) {
		AX |= 0x200;
	}

	AX |= 0x100;
	/* pkt_esbx = AX; */

	disk_state = 0;

}
#endif

static struct gendisk *gscd_disk;

static void __exit gscd_exit(void)
{
	CLEAR_TIMER;

	del_gendisk(gscd_disk);
	put_disk(gscd_disk);
	if ((unregister_blkdev(MAJOR_NR, "gscd") == -EINVAL)) {
		printk("What's that: can't unregister GoldStar-module\n");
		return;
	}
	blk_cleanup_queue(gscd_queue);
	release_region(gscd_port, GSCD_IO_EXTENT);
	printk(KERN_INFO "GoldStar-module released.\n");
}

/* This is the common initialisation for the GoldStar drive. */
/* It is called at boot time AND for module init.           */
static int __init gscd_init(void)
{
	int i;
	int result;
	int ret=0;

	printk(KERN_INFO "GSCD: version %s\n", GSCD_VERSION);
	printk(KERN_INFO
	       "GSCD: Trying to detect a Goldstar R420 CD-ROM drive at 0x%X.\n",
	       gscd_port);

	if (!request_region(gscd_port, GSCD_IO_EXTENT, "gscd")) {
		printk(KERN_WARNING "GSCD: Init failed, I/O port (%X) already"
		       " in use.\n", gscd_port);
		return -EIO;
	}


	/* check for card */
	result = wait_drv_ready();
	if (result == 0x09) {
		printk(KERN_WARNING "GSCD: DMA kann ich noch nicht!\n");
		ret = -EIO;
		goto err_out1;
	}

	if (result == 0x0b) {
		drv_mode = result;
		i = find_drives();
		if (i == 0) {
			printk(KERN_WARNING "GSCD: GoldStar CD-ROM Drive is"
			       " not found.\n");
			ret = -EIO;
			goto err_out1;
		}
	}

	if ((result != 0x0b) && (result != 0x09)) {
		printk(KERN_WARNING "GSCD: GoldStar Interface Adapter does not "
		       "exist or H/W error\n");
		ret = -EIO;
		goto err_out1;
	}

	/* reset all drives */
	i = 0;
	while (drv_states[i] != 0) {
		curr_drv_state = drv_states[i];
		printk(KERN_INFO "GSCD: Reset unit %d ... ", i);
		cc_Reset();
		printk("done\n");
		i++;
	}

	gscd_disk = alloc_disk(1);
	if (!gscd_disk)
		goto err_out1;
	gscd_disk->major = MAJOR_NR;
	gscd_disk->first_minor = 0;
	gscd_disk->fops = &gscd_fops;
	sprintf(gscd_disk->disk_name, "gscd");
	sprintf(gscd_disk->devfs_name, "gscd");

	if (register_blkdev(MAJOR_NR, "gscd")) {
		ret = -EIO;
		goto err_out2;
	}

	gscd_queue = blk_init_queue(do_gscd_request, &gscd_lock);
	if (!gscd_queue) {
		ret = -ENOMEM;
		goto err_out3;
	}

	disk_state = 0;
	gscdPresent = 1;

	gscd_disk->queue = gscd_queue;
	add_disk(gscd_disk);

	printk(KERN_INFO "GSCD: GoldStar CD-ROM Drive found.\n");
	return 0;

err_out3:
	unregister_blkdev(MAJOR_NR, "gscd");
err_out2:
	put_disk(gscd_disk);
err_out1:
	release_region(gscd_port, GSCD_IO_EXTENT);
	return ret;
}

static void gscd_hsg2msf(long hsg, struct msf *msf)
{
	hsg += CD_MSF_OFFSET;
	msf->min = hsg / (CD_FRAMES * CD_SECS);
	hsg %= CD_FRAMES * CD_SECS;
	msf->sec = hsg / CD_FRAMES;
	msf->frame = hsg % CD_FRAMES;

	gscd_bin2bcd(&msf->min);	/* convert to BCD */
	gscd_bin2bcd(&msf->sec);
	gscd_bin2bcd(&msf->frame);
}


static void gscd_bin2bcd(unsigned char *p)
{
	int u, t;

	u = *p % 10;
	t = *p / 10;
	*p = u | (t << 4);
}


#ifdef FUTURE_WORK
static long gscd_msf2hsg(struct msf *mp)
{
	return gscd_bcd2bin(mp->frame)
	    + gscd_bcd2bin(mp->sec) * CD_FRAMES
	    + gscd_bcd2bin(mp->min) * CD_FRAMES * CD_SECS - CD_MSF_OFFSET;
}

static int gscd_bcd2bin(unsigned char bcd)
{
	return (bcd >> 4) * 10 + (bcd & 0xF);
}
#endif

MODULE_AUTHOR("Oliver Raupach <raupach@nwfs1.rz.fh-hannover.de>");
MODULE_LICENSE("GPL");
module_init(gscd_init);
module_exit(gscd_exit);
MODULE_ALIAS_BLOCKDEV_MAJOR(GOLDSTAR_CDROM_MAJOR);
back to top