Revision 4d9c312cac874ff79cfa27a13f8ee3d817560d18 authored by Brad King on 02 October 2023, 12:57:16 UTC, committed by Kitware Robot on 02 October 2023, 12:57:36 UTC
ExternalProject.cmake
# Distributed under the OSI-approved BSD 3-Clause License. See accompanying
# file Copyright.txt or https://cmake.org/licensing for details.
include_guard(GLOBAL)
#[=======================================================================[.rst:
ExternalProject
---------------
.. only:: html
.. contents::
External Project Definition
^^^^^^^^^^^^^^^^^^^^^^^^^^^
.. command:: ExternalProject_Add
The ``ExternalProject_Add()`` function creates a custom target to drive
download, update/patch, configure, build, install and test steps of an
external project:
.. code-block:: cmake
ExternalProject_Add(<name> [<option>...])
The individual steps within the process can be driven independently if
required (e.g. for CDash submission) and extra custom steps can be defined,
along with the ability to control the step dependencies. The directory
structure used for the management of the external project can also be
customized. The function supports a large number of options which can be used
to tailor the external project behavior.
Directory Options
"""""""""""""""""
Most of the time, the default directory layout is sufficient. It is largely
an implementation detail that the main project usually doesn't need to
change. In some circumstances, however, control over the directory layout
can be useful or necessary. The directory options are potentially more
useful from the point of view that the main build can use the
:command:`ExternalProject_Get_Property` command to retrieve their values,
thereby allowing the main project to refer to build artifacts of the
external project.
``PREFIX <dir>``
Root directory for the external project. Unless otherwise noted below,
all other directories associated with the external project will be
created under here.
``TMP_DIR <dir>``
Directory in which to store temporary files.
``STAMP_DIR <dir>``
Directory in which to store the timestamps of each step. Log files from
individual steps are also created in here unless overridden by LOG_DIR
(see *Logging Options* below).
``LOG_DIR <dir>``
.. versionadded:: 3.14
Directory in which to store the logs of each step.
``DOWNLOAD_DIR <dir>``
Directory in which to store downloaded files before unpacking them. This
directory is only used by the URL download method, all other download
methods use ``SOURCE_DIR`` directly instead.
``SOURCE_DIR <dir>``
Source directory into which downloaded contents will be unpacked, or for
non-URL download methods, the directory in which the repository should be
checked out, cloned, etc. If no download method is specified, this must
point to an existing directory where the external project has already
been unpacked or cloned/checked out.
.. note::
If a download method is specified, any existing contents of the source
directory may be deleted. Only the URL download method checks whether
this directory is either missing or empty before initiating the
download, stopping with an error if it is not empty. All other
download methods silently discard any previous contents of the source
directory.
``BINARY_DIR <dir>``
Specify the build directory location. This option is ignored if
``BUILD_IN_SOURCE`` is enabled.
``INSTALL_DIR <dir>``
Installation prefix to be placed in the ``<INSTALL_DIR>`` placeholder.
This does not actually configure the external project to install to
the given prefix. That must be done by passing appropriate arguments
to the external project configuration step, e.g. using ``<INSTALL_DIR>``.
If any of the above ``..._DIR`` options are not specified, their defaults
are computed as follows. If the ``PREFIX`` option is given or the
``EP_PREFIX`` directory property is set, then an external project is built
and installed under the specified prefix::
TMP_DIR = <prefix>/tmp
STAMP_DIR = <prefix>/src/<name>-stamp
DOWNLOAD_DIR = <prefix>/src
SOURCE_DIR = <prefix>/src/<name>
BINARY_DIR = <prefix>/src/<name>-build
INSTALL_DIR = <prefix>
LOG_DIR = <STAMP_DIR>
Otherwise, if the ``EP_BASE`` directory property is set then components
of an external project are stored under the specified base::
TMP_DIR = <base>/tmp/<name>
STAMP_DIR = <base>/Stamp/<name>
DOWNLOAD_DIR = <base>/Download/<name>
SOURCE_DIR = <base>/Source/<name>
BINARY_DIR = <base>/Build/<name>
INSTALL_DIR = <base>/Install/<name>
LOG_DIR = <STAMP_DIR>
If no ``PREFIX``, ``EP_PREFIX``, or ``EP_BASE`` is specified, then the
default is to set ``PREFIX`` to ``<name>-prefix``. Relative paths are
interpreted with respect to :variable:`CMAKE_CURRENT_BINARY_DIR` at the
point where ``ExternalProject_Add()`` is called.
Download Step Options
"""""""""""""""""""""
A download method can be omitted if the ``SOURCE_DIR`` option is used to
point to an existing non-empty directory. Otherwise, one of the download
methods below must be specified (multiple download methods should not be
given) or a custom ``DOWNLOAD_COMMAND`` provided.
``DOWNLOAD_COMMAND <cmd>...``
Overrides the command used for the download step
(:manual:`generator expressions <cmake-generator-expressions(7)>` are
supported). If this option is specified, all other download options will
be ignored. Providing an empty string for ``<cmd>`` effectively disables
the download step.
URL
~~~
``URL <url1> [<url2>...]``
List of paths and/or URL(s) of the external project's source. When more
than one URL is given, they are tried in turn until one succeeds. A URL
may be an ordinary path in the local file system (in which case it
must be the only URL provided) or any downloadable URL supported by the
:command:`file(DOWNLOAD)` command. A local filesystem path may refer to
either an existing directory or to an archive file, whereas a URL is
expected to point to a file which can be treated as an archive. When an
archive is used, it will be unpacked automatically unless the
``DOWNLOAD_NO_EXTRACT`` option is set to prevent it. The archive type
is determined by inspecting the actual content rather than using logic
based on the file extension.
.. versionchanged:: 3.7
Multiple URLs are allowed.
``URL_HASH <algo>=<hashValue>``
Hash of the archive file to be downloaded. The argument should be of
the form ``<algo>=<hashValue>`` where ``algo`` can be any of the hashing
algorithms supported by the :command:`file()` command. Specifying this
option is strongly recommended for URL downloads, as it ensures the
integrity of the downloaded content. It is also used as a check for a
previously downloaded file, allowing connection to the remote location
to be avoided altogether if the local directory already has a file from
an earlier download that matches the specified hash.
``URL_MD5 <md5>``
Equivalent to ``URL_HASH MD5=<md5>``.
``DOWNLOAD_NAME <fname>``
File name to use for the downloaded file. If not given, the end of the
URL is used to determine the file name. This option is rarely needed,
the default name is generally suitable and is not normally used outside
of code internal to the ``ExternalProject`` module.
``DOWNLOAD_EXTRACT_TIMESTAMP <bool>``
.. versionadded:: 3.24
When specified with a true value, the timestamps of the extracted
files will match those in the archive. When false, the timestamps of
the extracted files will reflect the time at which the extraction
was performed. If the download URL changes, timestamps based off
those in the archive can result in dependent targets not being rebuilt
when they potentially should have been. Therefore, unless the file
timestamps are significant to the project in some way, use a false
value for this option. If ``DOWNLOAD_EXTRACT_TIMESTAMP`` is not given,
the default is false. See policy :policy:`CMP0135`.
``DOWNLOAD_NO_EXTRACT <bool>``
.. versionadded:: 3.6
Allows the extraction part of the download step to be disabled by
passing a boolean true value for this option. If this option is not
given, the downloaded contents will be unpacked automatically if
required. If extraction has been disabled, the full path to the
downloaded file is available as ``<DOWNLOADED_FILE>`` in subsequent
steps or as the property ``DOWNLOADED_FILE`` with the
:command:`ExternalProject_Get_Property` command.
``DOWNLOAD_NO_PROGRESS <bool>``
Can be used to disable logging the download progress. If this option is
not given, download progress messages will be logged.
``TIMEOUT <seconds>``
Maximum time allowed for file download operations.
``INACTIVITY_TIMEOUT <seconds>``
.. versionadded:: 3.19
Terminate the operation after a period of inactivity.
``HTTP_USERNAME <username>``
.. versionadded:: 3.7
Username for the download operation if authentication is required.
``HTTP_PASSWORD <password>``
.. versionadded:: 3.7
Password for the download operation if authentication is required.
``HTTP_HEADER <header1> [<header2>...]``
.. versionadded:: 3.7
Provides an arbitrary list of HTTP headers for the download operation.
This can be useful for accessing content in systems like AWS, etc.
``TLS_VERIFY <bool>``
Specifies whether certificate verification should be performed for
https URLs. If this option is not provided, the default behavior is
determined by the :variable:`CMAKE_TLS_VERIFY` variable (see
:command:`file(DOWNLOAD)`). If that is also not set, certificate
verification will not be performed. In situations where ``URL_HASH``
cannot be provided, this option can be an alternative verification
measure.
.. versionchanged:: 3.6
This option also applies to ``git clone`` invocations, although the
default behavior is different. If ``TLS_VERIFY`` is not given and
:variable:`CMAKE_TLS_VERIFY` is not set, the behavior will be
determined by git's defaults. Normally, the ``sslVerify`` git
config setting defaults to true, but the user may have overridden
this at a global level.
``TLS_CAINFO <file>``
Specify a custom certificate authority file to use if ``TLS_VERIFY``
is enabled. If this option is not specified, the value of the
:variable:`CMAKE_TLS_CAINFO` variable will be used instead (see
:command:`file(DOWNLOAD)`)
``NETRC <level>``
.. versionadded:: 3.11
Specify whether the ``.netrc`` file is to be used for operation.
If this option is not specified, the value of the
:variable:`CMAKE_NETRC` variable will be used instead
(see :command:`file(DOWNLOAD)`). Valid levels are:
``IGNORED``
The ``.netrc`` file is ignored.
This is the default.
``OPTIONAL``
The ``.netrc`` file is optional, and information in the URL
is preferred. The file will be scanned to find which ever
information is not specified in the URL.
``REQUIRED``
The ``.netrc`` file is required, and information in the URL
is ignored.
``NETRC_FILE <file>``
.. versionadded:: 3.11
Specify an alternative ``.netrc`` file to the one in your home directory
if the ``NETRC`` level is ``OPTIONAL`` or ``REQUIRED``. If this option
is not specified, the value of the :variable:`CMAKE_NETRC_FILE` variable
will be used instead (see :command:`file(DOWNLOAD)`)
.. versionadded:: 3.1
Added support for `tbz2`, `.tar.xz`, `.txz`, and `.7z` extensions.
Git
~~~
NOTE: A git version of 1.6.5 or later is required if this download method
is used.
``GIT_REPOSITORY <url>``
URL of the git repository. Any URL understood by the ``git`` command
may be used.
.. versionchanged:: 3.27
A relative URL will be resolved based on the parent project's
remote, subject to :policy:`CMP0150`. See the policy documentation
for how the remote is selected, including conditions where the
remote selection can fail. Local filesystem remotes should
always use absolute paths.
``GIT_TAG <tag>``
Git branch name, tag or commit hash. Note that branch names and tags
should generally be specified as remote names (i.e. ``origin/myBranch``
rather than simply ``myBranch``). This ensures that if the remote end
has its tag moved or branch rebased or history rewritten, the local
clone will still be updated correctly. In general, however, specifying
a commit hash should be preferred for a number of reasons:
- If the local clone already has the commit corresponding to the hash,
no ``git fetch`` needs to be performed to check for changes each time
CMake is re-run. This can result in a significant speed up if many
external projects are being used.
- Using a specific git hash ensures that the main project's own history
is fully traceable to a specific point in the external project's
evolution. If a branch or tag name is used instead, then checking out
a specific commit of the main project doesn't necessarily pin the
whole build to a specific point in the life of the external project.
The lack of such deterministic behavior makes the main project lose
traceability and repeatability.
If ``GIT_SHALLOW`` is enabled then ``GIT_TAG`` works only with
branch names and tags. A commit hash is not allowed.
Note that if not provided, ``GIT_TAG`` defaults to ``master``, not the
default Git branch name.
``GIT_REMOTE_NAME <name>``
The optional name of the remote. If this option is not specified, it
defaults to ``origin``.
``GIT_SUBMODULES <module>...``
Specific git submodules that should also be updated. If this option is
not provided, all git submodules will be updated.
.. versionchanged:: 3.16
When :policy:`CMP0097` is set to ``NEW``, if this value is set
to an empty string then no submodules are initialized or updated.
``GIT_SUBMODULES_RECURSE <bool>``
.. versionadded:: 3.17
Specify whether git submodules (if any) should update recursively by
passing the ``--recursive`` flag to ``git submodule update``.
If not specified, the default is on.
``GIT_SHALLOW <bool>``
.. versionadded:: 3.6
When this option is enabled, the ``git clone`` operation will be given
the ``--depth 1`` option. This performs a shallow clone, which avoids
downloading the whole history and instead retrieves just the commit
denoted by the ``GIT_TAG`` option.
``GIT_PROGRESS <bool>``
.. versionadded:: 3.8
When enabled, this option instructs the ``git clone`` operation to
report its progress by passing it the ``--progress`` option. Without
this option, the clone step for large projects may appear to make the
build stall, since nothing will be logged until the clone operation
finishes. While this option can be used to provide progress to prevent
the appearance of the build having stalled, it may also make the build
overly noisy if lots of external projects are used.
``GIT_CONFIG <option1> [<option2>...]``
.. versionadded:: 3.8
Specify a list of config options to pass to ``git clone``. Each option
listed will be transformed into its own ``--config <option>`` on the
``git clone`` command line, with each option required to be in the
form ``key=value``.
``GIT_REMOTE_UPDATE_STRATEGY <strategy>``
.. versionadded:: 3.18
When ``GIT_TAG`` refers to a remote branch, this option can be used to
specify how the update step behaves. The ``<strategy>`` must be one of
the following:
``CHECKOUT``
Ignore the local branch and always checkout the branch specified by
``GIT_TAG``.
``REBASE``
Try to rebase the current branch to the one specified by ``GIT_TAG``.
If there are local uncommitted changes, they will be stashed first
and popped again after rebasing. If rebasing or popping stashed
changes fail, abort the rebase and halt with an error.
When ``GIT_REMOTE_UPDATE_STRATEGY`` is not present, this is the
default strategy unless the default has been overridden with
``CMAKE_EP_GIT_REMOTE_UPDATE_STRATEGY`` (see below).
Note that if the branch specified in ``GIT_TAG`` is different to
the upstream branch currently being tracked, it is not safe to
perform a rebase. In that situation, ``REBASE`` will silently be
treated as ``CHECKOUT`` instead.
``REBASE_CHECKOUT``
Same as ``REBASE`` except if the rebase fails, an annotated tag will
be created at the original ``HEAD`` position from before the rebase
and then checkout ``GIT_TAG`` just like the ``CHECKOUT`` strategy.
The message stored on the annotated tag will give information about
what was attempted and the tag name will include a timestamp so that
each failed run will add a new tag. This strategy ensures no changes
will be lost, but updates should always succeed if ``GIT_TAG`` refers
to a valid ref unless there are uncommitted changes that cannot be
popped successfully.
The variable ``CMAKE_EP_GIT_REMOTE_UPDATE_STRATEGY`` can be set to
override the default strategy. This variable should not be set by a
project, it is intended for the user to set. It is primarily intended
for use in continuous integration scripts to ensure that when history
is rewritten on a remote branch, the build doesn't end up with
unintended changes or failed builds resulting from conflicts during
rebase operations.
Subversion
~~~~~~~~~~
``SVN_REPOSITORY <url>``
URL of the Subversion repository.
``SVN_REVISION -r<rev>``
Revision to checkout from the Subversion repository.
``SVN_USERNAME <username>``
Username for the Subversion checkout and update.
``SVN_PASSWORD <password>``
Password for the Subversion checkout and update.
``SVN_TRUST_CERT <bool>``
Specifies whether to trust the Subversion server site certificate. If
enabled, the ``--trust-server-cert`` option is passed to the ``svn``
checkout and update commands.
Mercurial
~~~~~~~~~
``HG_REPOSITORY <url>``
URL of the mercurial repository.
``HG_TAG <tag>``
Mercurial branch name, tag or commit id.
CVS
~~~
``CVS_REPOSITORY <cvsroot>``
CVSROOT of the CVS repository.
``CVS_MODULE <mod>``
Module to checkout from the CVS repository.
``CVS_TAG <tag>``
Tag to checkout from the CVS repository.
Update Step Options
"""""""""""""""""""
Whenever CMake is re-run, by default the external project's sources will be
updated if the download method supports updates (e.g. a git repository
would be checked if the ``GIT_TAG`` does not refer to a specific commit).
``UPDATE_COMMAND <cmd>...``
Overrides the download method's update step with a custom command.
The command may use
:manual:`generator expressions <cmake-generator-expressions(7)>`.
``UPDATE_DISCONNECTED <bool>``
.. versionadded:: 3.2
When enabled, this option causes the update step to be skipped (but see
below for changed behavior where this is not the case). It does not
prevent the download step. The update step can still be
added as a step target (see :command:`ExternalProject_Add_StepTargets`)
and called manually. This is useful if you want to allow developers to
build the project when disconnected from the network (the network may
still be needed for the download step though).
.. versionchanged:: 3.27
When ``UPDATE_DISCONNECTED`` is true, the update step will be executed
if any details about the update or download step are changed.
Furthermore, if using the git download/update method, the update
logic will be modified to skip attempts to contact the remote.
If the ``GIT_TAG`` mentions a ref that is not known locally, the
update step will halt with a fatal error.
When this option is present, it is generally advisable to make the value
a cache variable under the developer's control rather than hard-coding
it. If this option is not present, the default value is taken from the
``EP_UPDATE_DISCONNECTED`` directory property. If that is also not
defined, updates are performed as normal. The ``EP_UPDATE_DISCONNECTED``
directory property is intended as a convenience for controlling the
``UPDATE_DISCONNECTED`` behavior for an entire section of a project's
directory hierarchy and may be a more convenient method of giving
developers control over whether or not to perform updates (assuming the
project also provides a cache variable or some other convenient method
for setting the directory property).
This may cause a step target to be created automatically for the
``download`` step. See policy :policy:`CMP0114`.
Patch Step Options
""""""""""""""""""
``PATCH_COMMAND <cmd>...``
Specifies a custom command to patch the sources after an update. By
default, no patch command is defined. Note that it can be quite difficult
to define an appropriate patch command that performs robustly, especially
for download methods such as git where changing the ``GIT_TAG`` will not
discard changes from a previous patch, but the patch command will be
called again after updating to the new tag.
Configure Step Options
""""""""""""""""""""""
The configure step is run after the download and update steps. By default,
the external project is assumed to be a CMake project, but this can be
overridden if required.
``CONFIGURE_COMMAND <cmd>...``
The default configure command runs CMake with a few options based on
the main project. The options added are typically only those needed to
use the same generator as the main project, but the ``CMAKE_GENERATOR``
option can be given to override this. The project is responsible for
adding any toolchain details, flags or other settings it wants to
re-use from the main project or otherwise specify (see ``CMAKE_ARGS``,
``CMAKE_CACHE_ARGS`` and ``CMAKE_CACHE_DEFAULT_ARGS`` below).
For non-CMake external projects, the ``CONFIGURE_COMMAND`` option must
be used to override the default configure command
(:manual:`generator expressions <cmake-generator-expressions(7)>` are
supported). For projects that require no configure step, specify this
option with an empty string as the command to execute.
``CMAKE_COMMAND /.../cmake``
Specify an alternative cmake executable for the configure step (use an
absolute path). This is generally not recommended, since it is
usually desirable to use the same CMake version throughout the whole
build. This option is ignored if a custom configure command has been
specified with ``CONFIGURE_COMMAND``.
``CMAKE_GENERATOR <gen>``
Override the CMake generator used for the configure step. Without this
option, the same generator as the main build will be used. This option is
ignored if a custom configure command has been specified with the
``CONFIGURE_COMMAND`` option.
``CMAKE_GENERATOR_PLATFORM <platform>``
.. versionadded:: 3.1
Pass a generator-specific platform name to the CMake command (see
:variable:`CMAKE_GENERATOR_PLATFORM`). It is an error to provide this
option without the ``CMAKE_GENERATOR`` option.
``CMAKE_GENERATOR_TOOLSET <toolset>``
Pass a generator-specific toolset name to the CMake command (see
:variable:`CMAKE_GENERATOR_TOOLSET`). It is an error to provide this
option without the ``CMAKE_GENERATOR`` option.
``CMAKE_GENERATOR_INSTANCE <instance>``
.. versionadded:: 3.11
Pass a generator-specific instance selection to the CMake command (see
:variable:`CMAKE_GENERATOR_INSTANCE`). It is an error to provide this
option without the ``CMAKE_GENERATOR`` option.
``CMAKE_ARGS <arg>...``
The specified arguments are passed to the :program:`cmake` command line.
They can be any argument the :program:`cmake` command understands, not just
cache values defined by ``-D...`` arguments (see also
:manual:`CMake Options <cmake(1)>`).
.. versionadded:: 3.3
Arguments may use
:manual:`generator expressions <cmake-generator-expressions(7)>`.
``CMAKE_CACHE_ARGS <arg>...``
This is an alternate way of specifying cache variables where command line
length issues may become a problem. The arguments are expected to be in
the form ``-Dvar:STRING=value``, which are then transformed into
CMake :command:`set` commands with the ``FORCE`` option used. These
``set()`` commands are written to a pre-load script which is then applied
using the :manual:`cmake -C <cmake(1)>` command line option.
.. versionadded:: 3.3
Arguments may use
:manual:`generator expressions <cmake-generator-expressions(7)>`.
``CMAKE_CACHE_DEFAULT_ARGS <arg>...``
.. versionadded:: 3.2
This is the same as the ``CMAKE_CACHE_ARGS`` option except the ``set()``
commands do not include the ``FORCE`` keyword. This means the values act
as initial defaults only and will not override any variables already set
from a previous run. Use this option with care, as it can lead to
different behavior depending on whether the build starts from a fresh
build directory or re-uses previous build contents.
.. versionadded:: 3.15
If the CMake generator is the ``Green Hills MULTI`` and not overridden,
the original project's settings for the GHS toolset and target system
customization cache variables are propagated into the external project.
``SOURCE_SUBDIR <dir>``
.. versionadded:: 3.7
When no ``CONFIGURE_COMMAND`` option is specified, the configure step
assumes the external project has a ``CMakeLists.txt`` file at the top of
its source tree (i.e. in ``SOURCE_DIR``). The ``SOURCE_SUBDIR`` option
can be used to point to an alternative directory within the source tree
to use as the top of the CMake source tree instead. This must be a
relative path and it will be interpreted as being relative to
``SOURCE_DIR``.
.. versionadded:: 3.14
When ``BUILD_IN_SOURCE`` option is enabled, the ``BUILD_COMMAND``
is used to point to an alternative directory within the source tree.
``CONFIGURE_HANDLED_BY_BUILD <bool>``
.. versionadded:: 3.20
Enabling this option relaxes the dependencies of the configure step on
other external projects to order-only. This means the configure step will
be executed after its external project dependencies are built but it will
not be marked dirty when one of its external project dependencies is
rebuilt. This option can be enabled when the build step is smart enough
to figure out if the configure step needs to be rerun. CMake and Meson are
examples of build systems whose build step is smart enough to know if the
configure step needs to be rerun.
Build Step Options
""""""""""""""""""
If the configure step assumed the external project uses CMake as its build
system, the build step will also. Otherwise, the build step will assume a
Makefile-based build and simply run ``make`` with no arguments as the
default build step. This can be overridden with custom build commands if
required.
If both the main project and the external project use make as their build
tool, the build step of the external project is invoked as a recursive
make using ``$(MAKE)``. This will communicate some build tool settings
from the main project to the external project. If either the main project
or external project is not using make, no build tool settings will be
passed to the external project other than those established by the
configure step (i.e. running ``ninja -v`` in the main project will not
pass ``-v`` to the external project's build step, even if it also uses
``ninja`` as its build tool).
``BUILD_COMMAND <cmd>...``
Overrides the default build command
(:manual:`generator expressions <cmake-generator-expressions(7)>` are
supported). If this option is not given, the default build command will
be chosen to integrate with the main build in the most appropriate way
(e.g. using recursive ``make`` for Makefile generators or
:option:`cmake --build` if the project uses a CMake build). This option
can be specified with an empty string as the command to make the build
step do nothing.
``BUILD_IN_SOURCE <bool>``
When this option is enabled, the build will be done directly within the
external project's source tree. This should generally be avoided, the use
of a separate build directory is usually preferred, but it can be useful
when the external project assumes an in-source build. The ``BINARY_DIR``
option should not be specified if building in-source.
``BUILD_ALWAYS <bool>``
Enabling this option forces the build step to always be run. This can be
the easiest way to robustly ensure that the external project's own build
dependencies are evaluated rather than relying on the default
success timestamp-based method. This option is not normally needed unless
developers are expected to modify something the external project's build
depends on in a way that is not detectable via the step target
dependencies (e.g. ``SOURCE_DIR`` is used without a download method and
developers might modify the sources in ``SOURCE_DIR``).
``BUILD_BYPRODUCTS <file>...``
.. versionadded:: 3.2
Specifies files that will be generated by the build command but which
might or might not have their modification time updated by subsequent
builds. This may also be required to explicitly declare dependencies
when using the :generator:`Ninja` generator.
These ultimately get passed through as ``BYPRODUCTS`` to the
build step's own underlying call to :command:`add_custom_command`, which
has additional documentation.
``BUILD_JOB_SERVER_AWARE <bool>``
.. versionadded:: 3.28
Specifies that the build step is aware of the GNU Make job server.
See the :command:`add_custom_command` documentation of its
``JOB_SERVER_AWARE`` option for details. This option is relevant
only when an explicit ``BUILD_COMMAND`` is specified.
Install Step Options
""""""""""""""""""""
If the configure step assumed the external project uses CMake as its build
system, the install step will also. Otherwise, the install step will assume
a Makefile-based build and simply run ``make install`` as the default build
step. This can be overridden with custom install commands if required.
``INSTALL_COMMAND <cmd>...``
The external project's own install step is invoked as part of the main
project's *build*. It is done after the external project's build step
and may be before or after the external project's test step (see the
``TEST_BEFORE_INSTALL`` option below). The external project's install
rules are not part of the main project's install rules, so if anything
from the external project should be installed as part of the main build,
these need to be specified in the main build as additional
:command:`install` commands. The default install step builds the
``install`` target of the external project, but this can be overridden
with a custom command using this option
(:manual:`generator expressions <cmake-generator-expressions(7)>` are
supported). Passing an empty string as the ``<cmd>`` makes the install
step do nothing.
``INSTALL_BYPRODUCTS <file>...``
.. versionadded:: 3.26
Specifies files that will be generated by the install command but which
might or might not have their modification time updated by subsequent
installs. This may also be required to explicitly declare dependencies
when using the :generator:`Ninja` generator.
These ultimately get passed through as ``BYPRODUCTS`` to the
install step's own underlying call to :command:`add_custom_command`, which
has additional documentation.
.. note::
If the :envvar:`CMAKE_INSTALL_MODE` environment variable is set when the
main project is built, it will only have an effect if the following
conditions are met:
* The main project's configure step assumed the external project uses
CMake as its build system.
* The external project's install command actually runs. Note that due
to the way ``ExternalProject`` may use timestamps internally, if
nothing the install step depends on needs to be re-executed, the
install command might also not need to run.
Note also that ``ExternalProject`` does not check whether the
:envvar:`CMAKE_INSTALL_MODE` environment variable changes from one run
to another.
Test Step Options
"""""""""""""""""
The test step is only defined if at least one of the following ``TEST_...``
options are provided.
``TEST_COMMAND <cmd>...``
Overrides the default test command
(:manual:`generator expressions <cmake-generator-expressions(7)>` are
supported). If this option is not given, the default behavior of the test
step is to build the external project's own ``test`` target. This option
can be specified with ``<cmd>`` as an empty string, which allows the test
step to still be defined, but it will do nothing. Do not specify any of
the other ``TEST_...`` options if providing an empty string as the test
command, but prefer to omit all ``TEST_...`` options altogether if the
test step target is not needed.
``TEST_BEFORE_INSTALL <bool>``
When this option is enabled, the test step will be executed before the
install step. The default behavior is for the test step to run after the
install step.
``TEST_AFTER_INSTALL <bool>``
This option is mainly useful as a way to indicate that the test step is
desired but all default behavior is sufficient. Specifying this option
with a boolean true value ensures the test step is defined and that it
comes after the install step. If both ``TEST_BEFORE_INSTALL`` and
``TEST_AFTER_INSTALL`` are enabled, the latter is silently ignored.
``TEST_EXCLUDE_FROM_MAIN <bool>``
.. versionadded:: 3.2
If enabled, the main build's default ALL target will not depend on the
test step. This can be a useful way of ensuring the test step is defined
but only gets invoked when manually requested.
This may cause a step target to be created automatically for either
the ``install`` or ``build`` step. See policy :policy:`CMP0114`.
Output Logging Options
""""""""""""""""""""""
Each of the following ``LOG_...`` options can be used to wrap the relevant
step in a script to capture its output to files. The log files will be
created in ``LOG_DIR`` if supplied or otherwise the ``STAMP_DIR``
directory with step-specific file names.
``LOG_DOWNLOAD <bool>``
When enabled, the output of the download step is logged to files.
``LOG_UPDATE <bool>``
When enabled, the output of the update step is logged to files.
``LOG_PATCH <bool>``
.. versionadded:: 3.14
When enabled, the output of the patch step is logged to files.
``LOG_CONFIGURE <bool>``
When enabled, the output of the configure step is logged to files.
``LOG_BUILD <bool>``
When enabled, the output of the build step is logged to files.
``LOG_INSTALL <bool>``
When enabled, the output of the install step is logged to files.
``LOG_TEST <bool>``
When enabled, the output of the test step is logged to files.
``LOG_MERGED_STDOUTERR <bool>``
.. versionadded:: 3.14
When enabled, stdout and stderr will be merged for any step whose
output is being logged to files.
``LOG_OUTPUT_ON_FAILURE <bool>``
.. versionadded:: 3.14
This option only has an effect if at least one of the other ``LOG_<step>``
options is enabled. If an error occurs for a step which has logging to
file enabled, that step's output will be printed to the console if
``LOG_OUTPUT_ON_FAILURE`` is set to true. For cases where a large amount
of output is recorded, just the end of that output may be printed to the
console.
Terminal Access Options
"""""""""""""""""""""""
.. versionadded:: 3.4
Steps can be given direct access to the terminal in some cases. Giving a
step access to the terminal may allow it to receive terminal input if
required, such as for authentication details not provided by other options.
With the :generator:`Ninja` generator, these options place the steps in the
``console`` :prop_gbl:`job pool <JOB_POOLS>`. Each step can be given access
to the terminal individually via the following options:
``USES_TERMINAL_DOWNLOAD <bool>``
Give the download step access to the terminal.
``USES_TERMINAL_UPDATE <bool>``
Give the update step access to the terminal.
``USES_TERMINAL_PATCH <bool>``
.. versionadded:: 3.23
Give the patch step access to the terminal.
``USES_TERMINAL_CONFIGURE <bool>``
Give the configure step access to the terminal.
``USES_TERMINAL_BUILD <bool>``
Give the build step access to the terminal.
``USES_TERMINAL_INSTALL <bool>``
Give the install step access to the terminal.
``USES_TERMINAL_TEST <bool>``
Give the test step access to the terminal.
Target Options
""""""""""""""
``DEPENDS <targets>...``
Specify other targets on which the external project depends. The other
targets will be brought up to date before any of the external project's
steps are executed. Because the external project uses additional custom
targets internally for each step, the ``DEPENDS`` option is the most
convenient way to ensure all of those steps depend on the other targets.
Simply doing
:command:`add_dependencies(\<name\> \<targets\>) <add_dependencies>` will
not make any of the steps dependent on ``<targets>``.
``EXCLUDE_FROM_ALL <bool>``
When enabled, this option excludes the external project from the default
ALL target of the main build.
``STEP_TARGETS <step-target>...``
Generate custom targets for the specified steps. This is required if the
steps need to be triggered manually or if they need to be used as
dependencies of other targets. If this option is not specified, the
default value is taken from the ``EP_STEP_TARGETS`` directory property.
See :command:`ExternalProject_Add_StepTargets` below for further
discussion of the effects of this option.
``INDEPENDENT_STEP_TARGETS <step-target>...``
.. deprecated:: 3.19
This is allowed only if policy :policy:`CMP0114` is not set to ``NEW``.
Generates custom targets for the specified steps and prevent these targets
from having the usual dependencies applied to them. If this option is not
specified, the default value is taken from the
``EP_INDEPENDENT_STEP_TARGETS`` directory property. This option is mostly
useful for allowing individual steps to be driven independently, such as
for a CDash setup where each step should be initiated and reported
individually rather than as one whole build. See
:command:`ExternalProject_Add_StepTargets` below for further discussion
of the effects of this option.
Miscellaneous Options
"""""""""""""""""""""
``LIST_SEPARATOR <sep>``
For any of the various ``..._COMMAND`` options, and ``CMAKE_ARGS``,
replace ``;`` with ``<sep>`` in the specified command lines.
This can be useful where list variables may be given in commands where
they should end up as space-separated arguments (``<sep>`` would be a
single space character string in this case).
``COMMAND <cmd>...``
Any of the other ``..._COMMAND`` options can have additional commands
appended to them by following them with as many ``COMMAND ...`` options
as needed
(:manual:`generator expressions <cmake-generator-expressions(7)>` are
supported). For example:
.. code-block:: cmake
ExternalProject_Add(example
... # Download options, etc.
BUILD_COMMAND ${CMAKE_COMMAND} -E echo "Starting $<CONFIG> build"
COMMAND ${CMAKE_COMMAND} --build <BINARY_DIR> --config $<CONFIG>
COMMAND ${CMAKE_COMMAND} -E echo "$<CONFIG> build complete"
)
It should also be noted that each build step is created via a call to
:command:`ExternalProject_Add_Step`. See that command's documentation for the
automatic substitutions that are supported for some options.
Obtaining Project Properties
^^^^^^^^^^^^^^^^^^^^^^^^^^^^
.. command:: ExternalProject_Get_Property
The ``ExternalProject_Get_Property()`` function retrieves external project
target properties:
.. code-block:: cmake
ExternalProject_Get_Property(<name> <prop1> [<prop2>...])
The function stores property values in variables of the same name. Property
names correspond to the keyword argument names of ``ExternalProject_Add()``.
For example, the source directory might be retrieved like so:
.. code-block:: cmake
ExternalProject_Get_property(myExtProj SOURCE_DIR)
message("Source dir of myExtProj = ${SOURCE_DIR}")
Explicit Step Management
^^^^^^^^^^^^^^^^^^^^^^^^
The ``ExternalProject_Add()`` function on its own is often sufficient for
incorporating an external project into the main build. Certain scenarios
require additional work to implement desired behavior, such as adding in a
custom step or making steps available as manually triggerable targets. The
``ExternalProject_Add_Step()``, ``ExternalProject_Add_StepTargets()`` and
``ExternalProject_Add_StepDependencies`` functions provide the lower level
control needed to implement such step-level capabilities.
.. command:: ExternalProject_Add_Step
The ``ExternalProject_Add_Step()`` function specifies an additional custom
step for an external project defined by an earlier call to
:command:`ExternalProject_Add`:
.. code-block:: cmake
ExternalProject_Add_Step(<name> <step> [<option>...])
``<name>`` is the same as the name passed to the original call to
:command:`ExternalProject_Add`. The specified ``<step>`` must not be one of
the pre-defined steps (``mkdir``, ``download``, ``update``,
``patch``, ``configure``, ``build``, ``install`` or ``test``). The supported
options are:
``COMMAND <cmd>...``
The command line to be executed by this custom step
(:manual:`generator expressions <cmake-generator-expressions(7)>` are
supported). This option can be repeated multiple times to specify multiple
commands to be executed in order.
``COMMENT "<text>..."``
Text to be printed when the custom step executes.
``DEPENDEES <step>...``
Other steps (custom or pre-defined) on which this step depends.
``DEPENDERS <step>...``
Other steps (custom or pre-defined) that depend on this new custom step.
``DEPENDS <file>...``
Files on which this custom step depends.
``INDEPENDENT <bool>``
.. versionadded:: 3.19
Specifies whether this step is independent of the external dependencies
specified by the :command:`ExternalProject_Add`'s ``DEPENDS`` option.
The default is ``FALSE``. Steps marked as independent may depend only
on other steps marked independent. See policy :policy:`CMP0114`.
Note that this use of the term "independent" refers only to independence
from external targets specified by the ``DEPENDS`` option and is
orthogonal to a step's dependencies on other steps.
If a step target is created for an independent step by the
:command:`ExternalProject_Add` ``STEP_TARGETS`` option or by the
:command:`ExternalProject_Add_StepTargets` function, it will not depend
on the external targets, but may depend on targets for other steps.
``BYPRODUCTS <file>...``
.. versionadded:: 3.2
Files that will be generated by this custom step but which might or might
not have their modification time updated by subsequent builds.
This may also be required to explicitly declare dependencies
when using the :generator:`Ninja` generator. This list of
files will ultimately be passed through as the ``BYPRODUCTS`` option to the
:command:`add_custom_command` used to implement the custom step internally,
which has additional documentation.
``ALWAYS <bool>``
When enabled, this option specifies that the custom step should always be
run (i.e. that it is always considered out of date).
``JOB_SERVER_AWARE <bool>``
.. versionadded:: 3.28
Specifies that the custom step is aware of the GNU Make job server.
See the :command:`add_custom_command` documentation of its
``JOB_SERVER_AWARE`` option for details.
``EXCLUDE_FROM_MAIN <bool>``
When enabled, this option specifies that the external project's main target
does not depend on the custom step.
This may cause step targets to be created automatically for the steps on
which this step depends. See policy :policy:`CMP0114`.
``WORKING_DIRECTORY <dir>``
Specifies the working directory to set before running the custom step's
command. If this option is not specified, the directory will be the value
of the :variable:`CMAKE_CURRENT_BINARY_DIR` at the point where
``ExternalProject_Add_Step()`` was called.
``LOG <bool>``
If set, this causes the output from the custom step to be captured to files
in the external project's ``LOG_DIR`` if supplied or ``STAMP_DIR``.
``USES_TERMINAL <bool>``
If enabled, this gives the custom step direct access to the terminal if
possible.
The command line, comment, working directory and byproducts of every
standard and custom step are processed to replace the tokens
``<SOURCE_DIR>``, ``<SOURCE_SUBDIR>``, ``<BINARY_DIR>``, ``<INSTALL_DIR>``
``<TMP_DIR>``, ``<DOWNLOAD_DIR>`` and ``<DOWNLOADED_FILE>`` with their
corresponding property values defined in the original call to
:command:`ExternalProject_Add`.
.. versionadded:: 3.3
Token replacement is extended to byproducts.
.. versionadded:: 3.11
The ``<DOWNLOAD_DIR>`` substitution token.
.. command:: ExternalProject_Add_StepTargets
The ``ExternalProject_Add_StepTargets()`` function generates targets for the
steps listed. The name of each created target will be of the form
``<name>-<step>``:
.. code-block:: cmake
ExternalProject_Add_StepTargets(<name> <step1> [<step2>...])
Creating a target for a step allows it to be used as a dependency of another
target or to be triggered manually. Having targets for specific steps also
allows them to be driven independently of each other by specifying targets on
build command lines. For example, you may be submitting to a sub-project
based dashboard where you want to drive the configure portion of the build,
then submit to the dashboard, followed by the build portion, followed
by tests. If you invoke a custom target that depends on a step halfway
through the step dependency chain, then all the previous steps will also run
to ensure everything is up to date.
Internally, :command:`ExternalProject_Add` calls
:command:`ExternalProject_Add_Step` to create each step. If any
``STEP_TARGETS`` were specified, then ``ExternalProject_Add_StepTargets()``
will also be called after :command:`ExternalProject_Add_Step`. Even if a
step is not mentioned in the ``STEP_TARGETS`` option,
``ExternalProject_Add_StepTargets()`` can still be called later to manually
define a target for the step.
The ``STEP_TARGETS`` option for :command:`ExternalProject_Add` is generally
the easiest way to ensure targets are created for specific steps of interest.
For custom steps, ``ExternalProject_Add_StepTargets()`` must be called
explicitly if a target should also be created for that custom step.
An alternative to these two options is to populate the ``EP_STEP_TARGETS``
directory property. It acts as a default for the step target options and
can save having to repeatedly specify the same set of step targets when
multiple external projects are being defined.
.. versionadded:: 3.19
If :policy:`CMP0114` is set to ``NEW``, step targets are fully responsible
for holding the custom commands implementing their steps. The primary
target created by ``ExternalProject_Add`` depends on the step targets, and
the step targets depend on each other. The target-level dependencies match
the file-level dependencies used by the custom commands for each step.
The targets for steps created with :command:`ExternalProject_Add_Step`'s
``INDEPENDENT`` option do not depend on the external targets specified
by :command:`ExternalProject_Add`'s ``DEPENDS`` option. The predefined
steps ``mkdir``, ``download``, ``update``, and ``patch`` are independent.
If :policy:`CMP0114` is not ``NEW``, the following deprecated behavior
is available:
* A deprecated ``NO_DEPENDS`` option may be specified immediately after the
``<name>`` and before the first step.
If the ``NO_DEPENDS`` option is specified, the step target will not depend
on the dependencies of the external project (i.e. on any dependencies of the
``<name>`` custom target created by :command:`ExternalProject_Add`). This is
usually safe for the ``download``, ``update`` and ``patch`` steps, since
they do not typically require that the dependencies are updated and built.
Using ``NO_DEPENDS`` for any of the other pre-defined steps, however, may
break parallel builds. Only use ``NO_DEPENDS`` where it is certain that the
named steps genuinely do not have dependencies. For custom steps, consider
whether or not the custom commands require the dependencies to be
configured, built and installed.
* The ``INDEPENDENT_STEP_TARGETS`` option for :command:`ExternalProject_Add`,
or the ``EP_INDEPENDENT_STEP_TARGETS`` directory property, tells the
function to call ``ExternalProject_Add_StepTargets()`` internally
using the ``NO_DEPENDS`` option for the specified steps.
.. command:: ExternalProject_Add_StepDependencies
.. versionadded:: 3.2
The ``ExternalProject_Add_StepDependencies()`` function can be used to add
dependencies to a step. The dependencies added must be targets CMake already
knows about (these can be ordinary executable or library targets, custom
targets or even step targets of another external project):
.. code-block:: cmake
ExternalProject_Add_StepDependencies(<name> <step> <target1> [<target2>...])
This function takes care to set both target and file level dependencies and
will ensure that parallel builds will not break. It should be used instead of
:command:`add_dependencies` whenever adding a dependency for some of the step
targets generated by the ``ExternalProject`` module.
Examples
^^^^^^^^
The following example shows how to download and build a hypothetical project
called *FooBar* from github:
.. code-block:: cmake
include(ExternalProject)
ExternalProject_Add(foobar
GIT_REPOSITORY git@github.com:FooCo/FooBar.git
GIT_TAG origin/release/1.2.3
)
For the sake of the example, also define a second hypothetical external project
called *SecretSauce*, which is downloaded from a web server. Two URLs are given
to take advantage of a faster internal network if available, with a fallback to
a slower external server. The project is a typical ``Makefile`` project with no
configure step, so some of the default commands are overridden. The build is
only required to build the *sauce* target:
.. code-block:: cmake
find_program(MAKE_EXE NAMES gmake nmake make)
ExternalProject_Add(secretsauce
URL http://intranet.somecompany.com/artifacts/sauce-2.7.tgz
https://www.somecompany.com/downloads/sauce-2.7.zip
URL_HASH MD5=d41d8cd98f00b204e9800998ecf8427e
CONFIGURE_COMMAND ""
BUILD_COMMAND ${MAKE_EXE} sauce
)
Suppose the build step of ``secretsauce`` requires that ``foobar`` must already
be built. This could be enforced like so:
.. code-block:: cmake
ExternalProject_Add_StepDependencies(secretsauce build foobar)
Another alternative would be to create a custom target for ``foobar``'s build
step and make ``secretsauce`` depend on that rather than the whole ``foobar``
project. This would mean ``foobar`` only needs to be built, it doesn't need to
run its install or test steps before ``secretsauce`` can be built. The
dependency can also be defined along with the ``secretsauce`` project:
.. code-block:: cmake
ExternalProject_Add_StepTargets(foobar build)
ExternalProject_Add(secretsauce
URL http://intranet.somecompany.com/artifacts/sauce-2.7.tgz
https://www.somecompany.com/downloads/sauce-2.7.zip
URL_HASH MD5=d41d8cd98f00b204e9800998ecf8427e
CONFIGURE_COMMAND ""
BUILD_COMMAND ${MAKE_EXE} sauce
DEPENDS foobar-build
)
Instead of calling :command:`ExternalProject_Add_StepTargets`, the target could
be defined along with the ``foobar`` project itself:
.. code-block:: cmake
ExternalProject_Add(foobar
GIT_REPOSITORY git@github.com:FooCo/FooBar.git
GIT_TAG origin/release/1.2.3
STEP_TARGETS build
)
If many external projects should have the same set of step targets, setting a
directory property may be more convenient. The ``build`` step target could be
created automatically by setting the ``EP_STEP_TARGETS`` directory property
before creating the external projects with :command:`ExternalProject_Add`:
.. code-block:: cmake
set_property(DIRECTORY PROPERTY EP_STEP_TARGETS build)
Lastly, suppose that ``secretsauce`` provides a script called ``makedoc`` which
can be used to generate its own documentation. Further suppose that the script
expects the output directory to be provided as the only parameter and that it
should be run from the ``secretsauce`` source directory. A custom step and a
custom target to trigger the script can be defined like so:
.. code-block:: cmake
ExternalProject_Add_Step(secretsauce docs
COMMAND <SOURCE_DIR>/makedoc <BINARY_DIR>
WORKING_DIRECTORY <SOURCE_DIR>
COMMENT "Building secretsauce docs"
ALWAYS TRUE
EXCLUDE_FROM_MAIN TRUE
)
ExternalProject_Add_StepTargets(secretsauce docs)
The custom step could then be triggered from the main build like so::
cmake --build . --target secretsauce-docs
#]=======================================================================]
include(${CMAKE_CURRENT_LIST_DIR}/ExternalProject/shared_internal_commands.cmake)
cmake_policy(PUSH)
cmake_policy(SET CMP0054 NEW) # if() quoted variables not dereferenced
cmake_policy(SET CMP0057 NEW) # if() supports IN_LIST
macro(_ep_get_hash_algos out_var)
set(${out_var}
MD5
SHA1
SHA224
SHA256
SHA384
SHA512
SHA3_224
SHA3_256
SHA3_384
SHA3_512
)
endmacro()
macro(_ep_get_hash_regex out_var)
_ep_get_hash_algos(${out_var})
list(JOIN ${out_var} "|" ${out_var})
set(${out_var} "^(${${out_var}})=([0-9A-Fa-f]+)$")
endmacro()
function(_ep_parse_arguments
f
keywords
name
ns
args
)
# Transfer the arguments to this function into target properties for the
# new custom target we just added so that we can set up all the build steps
# correctly based on target properties.
#
# Because some keywords can be repeated, we can't use cmake_parse_arguments().
# Instead, we loop through ARGN and consider the namespace starting with an
# upper-case letter followed by at least two more upper-case letters,
# numbers or underscores to be keywords.
set(key)
foreach(arg IN LISTS args)
set(is_value 1)
if(arg MATCHES "^[A-Z][A-Z0-9_][A-Z0-9_]+$" AND
NOT (("x${arg}x" STREQUAL "x${key}x") AND
("x${key}x" STREQUAL "xCOMMANDx")) AND
NOT arg MATCHES "^(TRUE|FALSE)$")
if(arg IN_LIST keywords)
set(is_value 0)
endif()
endif()
if(is_value)
if(key)
# Value
if(NOT arg STREQUAL "")
set_property(TARGET ${name} APPEND PROPERTY ${ns}${key} "${arg}")
else()
get_property(have_key TARGET ${name} PROPERTY ${ns}${key} SET)
if(have_key)
get_property(value TARGET ${name} PROPERTY ${ns}${key})
set_property(TARGET ${name} PROPERTY ${ns}${key} "${value};${arg}")
else()
set_property(TARGET ${name} PROPERTY ${ns}${key} "${arg}")
endif()
endif()
else()
# Missing Keyword
message(AUTHOR_WARNING
"value '${arg}' with no previous keyword in ${f}"
)
endif()
else()
set(key "${arg}")
endif()
endforeach()
endfunction()
define_property(DIRECTORY PROPERTY "EP_BASE" INHERITED)
define_property(DIRECTORY PROPERTY "EP_PREFIX" INHERITED)
define_property(DIRECTORY PROPERTY "EP_STEP_TARGETS" INHERITED)
define_property(DIRECTORY PROPERTY "EP_INDEPENDENT_STEP_TARGETS" INHERITED)
define_property(DIRECTORY PROPERTY "EP_UPDATE_DISCONNECTED" INHERITED)
function(_ep_write_gitclone_script
script_filename
source_dir
git_EXECUTABLE
git_repository
git_tag
git_remote_name
init_submodules
git_submodules_recurse
git_submodules
git_shallow
git_progress
git_config
src_name
work_dir
gitclone_infofile
gitclone_stampfile
tls_verify
)
if(NOT GIT_VERSION_STRING VERSION_LESS 1.8.5)
# Use `git checkout <tree-ish> --` to avoid ambiguity with a local path.
set(git_checkout_explicit-- "--")
else()
# Use `git checkout <branch>` even though this risks ambiguity with a
# local path. Unfortunately we cannot use `git checkout <tree-ish> --`
# because that will not search for remote branch names, a common use case.
set(git_checkout_explicit-- "")
endif()
if("${git_tag}" STREQUAL "")
message(FATAL_ERROR "Tag for git checkout should not be empty.")
endif()
set(git_submodules_config_options "")
if(GIT_VERSION_STRING VERSION_LESS 2.20 OR
2.21 VERSION_LESS_EQUAL GIT_VERSION_STRING)
set(git_clone_options "--no-checkout")
else()
set(git_clone_options)
endif()
if(git_shallow)
if(NOT GIT_VERSION_STRING VERSION_LESS 1.7.10)
list(APPEND git_clone_options "--depth 1 --no-single-branch")
else()
list(APPEND git_clone_options "--depth 1")
endif()
endif()
if(git_progress)
list(APPEND git_clone_options --progress)
endif()
foreach(config IN LISTS git_config)
list(APPEND git_clone_options --config \"${config}\")
endforeach()
if(NOT ${git_remote_name} STREQUAL "origin")
list(APPEND git_clone_options --origin \"${git_remote_name}\")
endif()
if(NOT "x${tls_verify}" STREQUAL "x")
# The clone config option is sticky, it will apply to all subsequent git
# update operations. The submodules config option is not sticky, because
# git doesn't provide any way to do that. Thus, we will have to pass the
# same config option in the update step too for submodules, but not for
# the main git repo.
if(tls_verify)
# Default git behavior is "true", but the user might have changed the
# global default to "false". Since TLS_VERIFY was given, ensure we honor
# the specified setting regardless of what the global default might be.
list(APPEND git_clone_options -c http.sslVerify=true)
set(git_submodules_config_options -c http.sslVerify=true)
else()
list(APPEND git_clone_options -c http.sslVerify=false)
set(git_submodules_config_options -c http.sslVerify=false)
endif()
endif()
string (REPLACE ";" " " git_clone_options "${git_clone_options}")
configure_file(
${CMAKE_CURRENT_FUNCTION_LIST_DIR}/ExternalProject/gitclone.cmake.in
${script_filename}
@ONLY
)
endfunction()
function(_ep_write_hgclone_script
script_filename
source_dir
hg_EXECUTABLE
hg_repository
hg_tag
src_name
work_dir
hgclone_infofile
hgclone_stampfile
)
if("${hg_tag}" STREQUAL "")
message(FATAL_ERROR "Tag for hg checkout should not be empty.")
endif()
configure_file(
${CMAKE_CURRENT_FUNCTION_LIST_DIR}/ExternalProject/hgclone.cmake.in
${script_filename}
@ONLY
)
endfunction()
function(_ep_write_gitupdate_script
script_filename
git_EXECUTABLE
git_tag
git_remote_name
init_submodules
git_submodules_recurse
git_submodules
git_repository
work_dir
git_update_strategy
tls_verify
)
if("${git_tag}" STREQUAL "")
message(FATAL_ERROR "Tag for git checkout should not be empty.")
endif()
set(git_stash_save_options --quiet)
if(GIT_VERSION_STRING VERSION_GREATER_EQUAL 1.7.7)
# This avoids stashing files covered by .gitignore
list(APPEND git_stash_save_options --include-untracked)
elseif(GIT_VERSION_STRING VERSION_GREATER_EQUAL 1.7.6)
# Untracked files, but also ignored files, so potentially slower
list(APPEND git_stash_save_options --all)
endif()
set(git_submodules_config_options "")
if(NOT "x${tls_verify}" STREQUAL "x")
# The submodules config option is not sticky, git doesn't provide any way
# to do that. We have to pass this config option for the update step too.
# We don't need to set it for the non-submodule update because it gets
# recorded as part of the clone operation in a sticky manner.
if(tls_verify)
# Default git behavior is "true", but the user might have changed the
# global default to "false". Since TLS_VERIFY was given, ensure we honor
# the specified setting regardless of what the global default might be.
set(git_submodules_config_options -c http.sslVerify=true)
else()
set(git_submodules_config_options -c http.sslVerify=false)
endif()
endif()
configure_file(
"${CMAKE_CURRENT_FUNCTION_LIST_DIR}/ExternalProject/gitupdate.cmake.in"
"${script_filename}"
@ONLY
)
endfunction()
function(_ep_write_downloadfile_script
script_filename
REMOTE
LOCAL
timeout
inactivity_timeout
no_progress
hash
tls_verify
tls_cainfo
userpwd
http_headers
netrc
netrc_file
)
if(timeout)
set(TIMEOUT_ARGS TIMEOUT ${timeout})
set(TIMEOUT_MSG "${timeout} seconds")
else()
set(TIMEOUT_ARGS "# no TIMEOUT")
set(TIMEOUT_MSG "none")
endif()
if(inactivity_timeout)
set(INACTIVITY_TIMEOUT_ARGS INACTIVITY_TIMEOUT ${inactivity_timeout})
set(INACTIVITY_TIMEOUT_MSG "${inactivity_timeout} seconds")
else()
set(INACTIVITY_TIMEOUT_ARGS "# no INACTIVITY_TIMEOUT")
set(INACTIVITY_TIMEOUT_MSG "none")
endif()
if(no_progress)
set(SHOW_PROGRESS "")
else()
set(SHOW_PROGRESS "SHOW_PROGRESS")
endif()
_ep_get_hash_regex(_ep_hash_regex)
if("${hash}" MATCHES "${_ep_hash_regex}")
set(ALGO "${CMAKE_MATCH_1}")
string(TOLOWER "${CMAKE_MATCH_2}" EXPECT_VALUE)
else()
set(ALGO "")
set(EXPECT_VALUE "")
endif()
set(TLS_VERIFY_CODE "")
set(TLS_CAINFO_CODE "")
set(NETRC_CODE "")
set(NETRC_FILE_CODE "")
# check for curl globals in the project
if(DEFINED CMAKE_TLS_VERIFY)
set(TLS_VERIFY_CODE "set(CMAKE_TLS_VERIFY ${CMAKE_TLS_VERIFY})")
endif()
if(DEFINED CMAKE_TLS_CAINFO)
set(TLS_CAINFO_CODE "set(CMAKE_TLS_CAINFO \"${CMAKE_TLS_CAINFO}\")")
endif()
if(DEFINED CMAKE_NETRC)
set(NETRC_CODE "set(CMAKE_NETRC \"${CMAKE_NETRC}\")")
endif()
if(DEFINED CMAKE_NETRC_FILE)
set(NETRC_FILE_CODE "set(CMAKE_NETRC_FILE \"${CMAKE_NETRC_FILE}\")")
endif()
# now check for curl locals so that the local values
# will override the globals
# check for tls_verify argument
string(LENGTH "${tls_verify}" tls_verify_len)
if(tls_verify_len GREATER 0)
set(TLS_VERIFY_CODE "set(CMAKE_TLS_VERIFY ${tls_verify})")
endif()
# check for tls_cainfo argument
string(LENGTH "${tls_cainfo}" tls_cainfo_len)
if(tls_cainfo_len GREATER 0)
set(TLS_CAINFO_CODE "set(CMAKE_TLS_CAINFO \"${tls_cainfo}\")")
endif()
# check for netrc argument
string(LENGTH "${netrc}" netrc_len)
if(netrc_len GREATER 0)
set(NETRC_CODE "set(CMAKE_NETRC \"${netrc}\")")
endif()
# check for netrc_file argument
string(LENGTH "${netrc_file}" netrc_file_len)
if(netrc_file_len GREATER 0)
set(NETRC_FILE_CODE "set(CMAKE_NETRC_FILE \"${netrc_file}\")")
endif()
if(userpwd STREQUAL ":")
set(USERPWD_ARGS)
else()
set(USERPWD_ARGS USERPWD "${userpwd}")
endif()
set(HTTP_HEADERS_ARGS "")
if(NOT http_headers STREQUAL "")
foreach(header ${http_headers})
string(PREPEND HTTP_HEADERS_ARGS
"HTTPHEADER \"${header}\"\n "
)
endforeach()
endif()
# Used variables:
# * TLS_VERIFY_CODE
# * TLS_CAINFO_CODE
# * ALGO
# * EXPECT_VALUE
# * REMOTE
# * LOCAL
# * SHOW_PROGRESS
# * TIMEOUT_ARGS
# * TIMEOUT_MSG
# * USERPWD_ARGS
# * HTTP_HEADERS_ARGS
configure_file(
"${CMAKE_CURRENT_FUNCTION_LIST_DIR}/ExternalProject/download.cmake.in"
"${script_filename}"
@ONLY
)
endfunction()
function(_ep_write_verifyfile_script
script_filename
LOCAL
hash
)
_ep_get_hash_regex(_ep_hash_regex)
if("${hash}" MATCHES "${_ep_hash_regex}")
set(ALGO "${CMAKE_MATCH_1}")
string(TOLOWER "${CMAKE_MATCH_2}" EXPECT_VALUE)
else()
set(ALGO "")
set(EXPECT_VALUE "")
endif()
# Used variables:
# * ALGO
# * EXPECT_VALUE
# * LOCAL
configure_file(
"${CMAKE_CURRENT_FUNCTION_LIST_DIR}/ExternalProject/verify.cmake.in"
"${script_filename}"
@ONLY
)
endfunction()
function(_ep_write_extractfile_script
script_filename
name
filename
directory options
)
set(args "")
if(filename MATCHES
"(\\.|=)(7z|tar\\.bz2|tar\\.gz|tar\\.xz|tbz2|tgz|txz|zip)$")
set(args xfz)
endif()
if(filename MATCHES "(\\.|=)tar$")
set(args xf)
endif()
if(args STREQUAL "")
message(FATAL_ERROR
"Do not know how to extract '${filename}' -- known types are: "
".7z, .tar, .tar.bz2, .tar.gz, .tar.xz, .tbz2, .tgz, .txz and .zip"
)
endif()
configure_file(
"${CMAKE_CURRENT_FUNCTION_LIST_DIR}/ExternalProject/extractfile.cmake.in"
"${script_filename}"
@ONLY
)
endfunction()
function(_ep_set_directories name)
get_property(prefix TARGET ${name} PROPERTY _EP_PREFIX)
if(NOT prefix)
get_property(prefix DIRECTORY PROPERTY EP_PREFIX)
if(NOT prefix)
get_property(base DIRECTORY PROPERTY EP_BASE)
if(NOT base)
set(prefix "${name}-prefix")
endif()
endif()
endif()
if(prefix)
file(TO_CMAKE_PATH "${prefix}" prefix)
set(tmp_default "${prefix}/tmp")
set(download_default "${prefix}/src")
set(source_default "${prefix}/src/${name}")
set(binary_default "${prefix}/src/${name}-build")
set(stamp_default "${prefix}/src/${name}-stamp")
set(install_default "${prefix}")
else()
file(TO_CMAKE_PATH "${base}" base)
set(tmp_default "${base}/tmp/${name}")
set(download_default "${base}/Download/${name}")
set(source_default "${base}/Source/${name}")
set(binary_default "${base}/Build/${name}")
set(stamp_default "${base}/Stamp/${name}")
set(install_default "${base}/Install/${name}")
endif()
get_property(build_in_source TARGET ${name} PROPERTY _EP_BUILD_IN_SOURCE)
if(build_in_source)
get_property(have_binary_dir TARGET ${name} PROPERTY _EP_BINARY_DIR SET)
if(have_binary_dir)
message(FATAL_ERROR
"External project ${name} has both BINARY_DIR and BUILD_IN_SOURCE!"
)
endif()
endif()
set(top "${CMAKE_CURRENT_BINARY_DIR}")
# Apply defaults and convert to absolute paths.
set(places stamp download source binary install tmp)
foreach(var ${places})
string(TOUPPER "${var}" VAR)
get_property(${var}_dir TARGET ${name} PROPERTY _EP_${VAR}_DIR)
if(NOT ${var}_dir)
set(${var}_dir "${${var}_default}")
endif()
if(NOT IS_ABSOLUTE "${${var}_dir}")
get_filename_component(${var}_dir "${top}/${${var}_dir}" ABSOLUTE)
endif()
file(TO_CMAKE_PATH "${${var}_dir}" ${var}_dir)
set_property(TARGET ${name} PROPERTY _EP_${VAR}_DIR "${${var}_dir}")
endforeach()
# Special case for default log directory based on stamp directory.
get_property(log_dir TARGET ${name} PROPERTY _EP_LOG_DIR)
if(NOT log_dir)
get_property(log_dir TARGET ${name} PROPERTY _EP_STAMP_DIR)
endif()
if(NOT IS_ABSOLUTE "${log_dir}")
get_filename_component(log_dir "${top}/${log_dir}" ABSOLUTE)
endif()
file(TO_CMAKE_PATH "${log_dir}" log_dir)
set_property(TARGET ${name} PROPERTY _EP_LOG_DIR "${log_dir}")
get_property(source_subdir TARGET ${name} PROPERTY _EP_SOURCE_SUBDIR)
if(NOT source_subdir)
set_property(TARGET ${name} PROPERTY _EP_SOURCE_SUBDIR "")
elseif(IS_ABSOLUTE "${source_subdir}")
message(FATAL_ERROR
"External project ${name} has non-relative SOURCE_SUBDIR!"
)
else()
# Prefix with a slash so that when appended to the source directory, it
# behaves as expected.
file(TO_CMAKE_PATH "${source_subdir}" source_subdir)
set_property(TARGET ${name} PROPERTY _EP_SOURCE_SUBDIR "/${source_subdir}")
endif()
if(build_in_source)
get_property(source_dir TARGET ${name} PROPERTY _EP_SOURCE_DIR)
if(source_subdir)
set_property(TARGET ${name} PROPERTY
_EP_BINARY_DIR "${source_dir}/${source_subdir}"
)
else()
set_property(TARGET ${name} PROPERTY
_EP_BINARY_DIR "${source_dir}"
)
endif()
endif()
# This script will be used both here and by the mkdir step. We create the
# directories now at configure time and ensure they exist again at build
# time (since somebody might remove one of the required directories and try
# to rebuild without re-running cmake). They need to exist now at makefile
# generation time for Borland make and wmake so that CMake may generate
# makefiles with "cd C:\short\paths\with\no\spaces" commands in them.
set(script_filename "${tmp_dir}/${name}-mkdirs.cmake")
configure_file(
${CMAKE_CURRENT_FUNCTION_LIST_DIR}/ExternalProject/mkdirs.cmake.in
${script_filename}
@ONLY
)
unset(cfgdir) # do not leak into mkdirs.cmake script
include(${script_filename})
endfunction()
# IMPORTANT: this MUST be a macro and not a function because of the
# in-place replacements that occur in each ${var}
#
macro(_ep_replace_location_tags target_name)
set(vars ${ARGN})
foreach(var ${vars})
if(${var})
foreach(dir
SOURCE_DIR
SOURCE_SUBDIR
BINARY_DIR
INSTALL_DIR
TMP_DIR
DOWNLOAD_DIR
DOWNLOADED_FILE
LOG_DIR
)
get_property(val TARGET ${target_name} PROPERTY _EP_${dir})
string(REPLACE "<${dir}>" "${val}" ${var} "${${var}}")
endforeach()
endif()
endforeach()
endmacro()
function(_ep_command_line_to_initial_cache
var
args
force
)
set(script_initial_cache "")
set(regex "^([^:]+):([^=]+)=(.*)$")
set(setArg "")
set(forceArg "")
if(force)
set(forceArg "FORCE")
endif()
foreach(line ${args})
if("${line}" MATCHES "^-D(.*)")
set(line "${CMAKE_MATCH_1}")
if(NOT "${setArg}" STREQUAL "")
# This is required to build up lists in variables, or complete an entry
string(APPEND setArg
"${accumulator}\" CACHE ${type} \"Initial cache\" ${forceArg})"
)
string(APPEND script_initial_cache "\n${setArg}")
set(accumulator "")
set(setArg "")
endif()
if("${line}" MATCHES "${regex}")
set(name "${CMAKE_MATCH_1}")
set(type "${CMAKE_MATCH_2}")
set(value "${CMAKE_MATCH_3}")
set(setArg "set(${name} \"${value}")
else()
message(WARNING "Line '${line}' does not match regex. Ignoring.")
endif()
else()
# Assume this is a list to append to the last var
string(APPEND accumulator ";${line}")
endif()
endforeach()
# Catch the final line of the args
if(NOT "${setArg}" STREQUAL "")
string(APPEND setArg
"${accumulator}\" CACHE ${type} \"Initial cache\" ${forceArg})"
)
string(APPEND script_initial_cache "\n${setArg}")
endif()
set(${var} ${script_initial_cache} PARENT_SCOPE)
endfunction()
function(_ep_write_initial_cache
target_name
script_filename
script_initial_cache
)
# Write out values into an initial cache, that will be passed to CMake with -C
# Replace location tags.
_ep_replace_location_tags(${target_name} script_initial_cache)
_ep_replace_location_tags(${target_name} script_filename)
# Replace list separators.
get_property(sep TARGET ${target_name} PROPERTY _EP_LIST_SEPARATOR)
if(sep AND script_initial_cache)
string(REPLACE "${sep}" ";" script_initial_cache "${script_initial_cache}")
endif()
# Write out the initial cache file to the location specified.
file(GENERATE OUTPUT "${script_filename}" CONTENT "${script_initial_cache}")
endfunction()
function(ExternalProject_Get_Property name)
foreach(var ${ARGN})
string(TOUPPER "${var}" VAR)
get_property(is_set TARGET ${name} PROPERTY _EP_${VAR} SET)
if(NOT is_set)
message(FATAL_ERROR "External project \"${name}\" has no ${var}")
endif()
get_property(${var} TARGET ${name} PROPERTY _EP_${VAR})
set(${var} "${${var}}" PARENT_SCOPE)
endforeach()
endfunction()
function(_ep_get_configure_command_id
name
cfg_cmd_id_var
)
get_target_property(cmd ${name} _EP_CONFIGURE_COMMAND)
if(cmd STREQUAL "")
# Explicit empty string means no configure step for this project
set(${cfg_cmd_id_var} "none" PARENT_SCOPE)
else()
if(NOT cmd)
# Default is "use cmake":
set(${cfg_cmd_id_var} "cmake" PARENT_SCOPE)
else()
# Otherwise we have to analyze the value:
if(cmd MATCHES "^[^;]*/configure")
set(${cfg_cmd_id_var} "configure" PARENT_SCOPE)
elseif(cmd MATCHES "^[^;]*/cmake" AND NOT cmd MATCHES ";-[PE];")
set(${cfg_cmd_id_var} "cmake" PARENT_SCOPE)
elseif(cmd MATCHES "config")
set(${cfg_cmd_id_var} "configure" PARENT_SCOPE)
else()
set(${cfg_cmd_id_var} "unknown:${cmd}" PARENT_SCOPE)
endif()
endif()
endif()
endfunction()
function(_ep_get_build_command
name
step
cmd_var
)
set(cmd "")
set(args)
_ep_get_configure_command_id(${name} cfg_cmd_id)
if(cfg_cmd_id STREQUAL "cmake")
# CMake project. Select build command based on generator.
get_target_property(cmake_generator ${name} _EP_CMAKE_GENERATOR)
if("${CMAKE_GENERATOR}" MATCHES "Make" AND
("${cmake_generator}" MATCHES "Make" OR NOT cmake_generator))
# The project uses the same Makefile generator. Use recursive make.
set(cmd "$(MAKE)")
if(step STREQUAL "INSTALL")
set(args install)
endif()
if("x${step}x" STREQUAL "xTESTx")
set(args test)
endif()
else()
# Drive the project with "cmake --build".
get_target_property(cmake_command ${name} _EP_CMAKE_COMMAND)
if(cmake_command)
set(cmd "${cmake_command}")
else()
set(cmd "${CMAKE_COMMAND}")
endif()
set(args --build ".")
get_property(_isMultiConfig GLOBAL PROPERTY GENERATOR_IS_MULTI_CONFIG)
if(_isMultiConfig)
if (CMAKE_CFG_INTDIR AND
NOT CMAKE_CFG_INTDIR STREQUAL "." AND
NOT CMAKE_CFG_INTDIR MATCHES "\\$")
# CMake 3.4 and below used the CMAKE_CFG_INTDIR placeholder value
# provided by multi-configuration generators. Some projects were
# taking advantage of that undocumented implementation detail to
# specify a specific configuration here. They should use
# BUILD_COMMAND to change the default command instead, but for
# compatibility honor the value.
set(config ${CMAKE_CFG_INTDIR})
message(AUTHOR_WARNING
"CMAKE_CFG_INTDIR should not be set by project code.\n"
"To get a non-default build command, use the BUILD_COMMAND option."
)
else()
set(config $<CONFIG>)
endif()
list(APPEND args --config ${config})
endif()
if(step STREQUAL "INSTALL")
list(APPEND args --target install)
endif()
# But for "TEST" drive the project with corresponding "ctest".
if("x${step}x" STREQUAL "xTESTx")
string(REGEX REPLACE "^(.*/)cmake([^/]*)$" "\\1ctest\\2" cmd "${cmd}")
set(args "")
if(_isMultiConfig)
list(APPEND args -C ${config})
endif()
endif()
endif()
else()
# Non-CMake project. Guess "make" and "make install" and "make test".
if("${CMAKE_GENERATOR}" MATCHES "Makefiles")
# Try to get the parallel arguments
set(cmd "$(MAKE)")
else()
set(cmd "make")
endif()
if(step STREQUAL "INSTALL")
set(args install)
endif()
if("x${step}x" STREQUAL "xTESTx")
set(args test)
endif()
endif()
# Use user-specified arguments instead of default arguments, if any.
get_property(have_args TARGET ${name} PROPERTY _EP_${step}_ARGS SET)
if(have_args)
get_target_property(args ${name} _EP_${step}_ARGS)
endif()
if(NOT "${args}" STREQUAL "")
# args could have empty items, so we must quote it to prevent them
# from being silently removed
list(APPEND cmd "${args}")
endif()
set(${cmd_var} "${cmd}" PARENT_SCOPE)
endfunction()
function(_ep_write_log_script
name
step
cmd_var
)
ExternalProject_Get_Property(${name} log_dir)
ExternalProject_Get_Property(${name} stamp_dir)
set(command "${${cmd_var}}")
set(make "")
set(code_cygpath_make "")
if(command MATCHES "^\\$\\(MAKE\\)")
# GNU make recognizes the string "$(MAKE)" as recursive make, so
# ensure that it appears directly in the makefile.
string(REGEX REPLACE "^\\$\\(MAKE\\)" "\${make}" command "${command}")
set(make "-Dmake=$(MAKE)")
if(WIN32 AND NOT CYGWIN)
set(code_cygpath_make "
if(\${make} MATCHES \"^/\")
execute_process(
COMMAND cygpath -w \${make}
OUTPUT_VARIABLE cygpath_make
ERROR_VARIABLE cygpath_make
RESULT_VARIABLE cygpath_error
OUTPUT_STRIP_TRAILING_WHITESPACE
)
if(NOT cygpath_error)
set(make \${cygpath_make})
endif()
endif()
")
endif()
endif()
set(config "")
if("${CMAKE_CFG_INTDIR}" MATCHES "^\\$")
string(REPLACE "${CMAKE_CFG_INTDIR}" "\${config}" command "${command}")
set(config "-Dconfig=${CMAKE_CFG_INTDIR}")
endif()
# Wrap multiple 'COMMAND' lines up into a second-level wrapper
# script so all output can be sent to one log file.
if(command MATCHES "(^|;)COMMAND;")
set(code_execute_process "
${code_cygpath_make}
execute_process(COMMAND \${command} RESULT_VARIABLE result)
if(result)
set(msg \"Command failed (\${result}):\\n\")
foreach(arg IN LISTS command)
set(msg \"\${msg} '\${arg}'\")
endforeach()
message(FATAL_ERROR \"\${msg}\")
endif()
")
set(code "")
set(cmd "")
set(sep "")
foreach(arg IN LISTS command)
if("x${arg}" STREQUAL "xCOMMAND")
if(NOT "x${cmd}" STREQUAL "x")
string(APPEND code "set(command \"${cmd}\")${code_execute_process}")
endif()
set(cmd "")
set(sep "")
else()
string(APPEND cmd "${sep}${arg}")
set(sep ";")
endif()
endforeach()
string(APPEND code "set(command \"${cmd}\")${code_execute_process}")
file(GENERATE
OUTPUT "${stamp_dir}/${name}-${step}-$<CONFIG>-impl.cmake"
CONTENT "${code}"
)
set(command
${CMAKE_COMMAND}
"-Dmake=\${make}"
"-Dconfig=\${config}"
-P ${stamp_dir}/${name}-${step}-$<CONFIG>-impl.cmake
)
endif()
# Wrap the command in a script to log output to files.
set(script ${stamp_dir}/${name}-${step}-$<CONFIG>.cmake)
set(logbase ${log_dir}/${name}-${step})
get_property(log_merged
TARGET ${name}
PROPERTY _EP_LOG_MERGED_STDOUTERR
)
get_property(log_output_on_failure
TARGET ${name}
PROPERTY _EP_LOG_OUTPUT_ON_FAILURE
)
if (log_merged)
set(stdout_log "${logbase}.log")
set(stderr_log "${logbase}.log")
else()
set(stdout_log "${logbase}-out.log")
set(stderr_log "${logbase}-err.log")
endif()
set(code "
cmake_minimum_required(VERSION 3.15)
${code_cygpath_make}
set(command \"${command}\")
set(log_merged \"${log_merged}\")
set(log_output_on_failure \"${log_output_on_failure}\")
set(stdout_log \"${stdout_log}\")
set(stderr_log \"${stderr_log}\")
execute_process(
COMMAND \${command}
RESULT_VARIABLE result
OUTPUT_FILE \"\${stdout_log}\"
ERROR_FILE \"\${stderr_log}\"
)
macro(read_up_to_max_size log_file output_var)
file(SIZE \${log_file} determined_size)
set(max_size 10240)
if (determined_size GREATER max_size)
math(EXPR seek_position \"\${determined_size} - \${max_size}\")
file(READ \${log_file} \${output_var} OFFSET \${seek_position})
set(\${output_var} \"...skipping to end...\\n\${\${output_var}}\")
else()
file(READ \${log_file} \${output_var})
endif()
endmacro()
if(result)
set(msg \"Command failed: \${result}\\n\")
foreach(arg IN LISTS command)
set(msg \"\${msg} '\${arg}'\")
endforeach()
if (\${log_merged})
set(msg \"\${msg}\\nSee also\\n \${stderr_log}\")
else()
set(msg \"\${msg}\\nSee also\\n ${logbase}-*.log\")
endif()
if (\${log_output_on_failure})
message(SEND_ERROR \"\${msg}\")
if (\${log_merged})
read_up_to_max_size(\"\${stderr_log}\" error_log_contents)
message(STATUS \"Log output is:\\n\${error_log_contents}\")
else()
read_up_to_max_size(\"\${stdout_log}\" out_log_contents)
read_up_to_max_size(\"\${stderr_log}\" err_log_contents)
message(STATUS \"stdout output is:\\n\${out_log_contents}\")
message(STATUS \"stderr output is:\\n\${err_log_contents}\")
endif()
message(FATAL_ERROR \"Stopping after outputting logs.\")
else()
message(FATAL_ERROR \"\${msg}\")
endif()
else()
if(NOT \"${CMAKE_GENERATOR}\" MATCHES \"Ninja\")
set(msg \"${name} ${step} command succeeded. See also ${logbase}-*.log\")
message(STATUS \"\${msg}\")
endif()
endif()
")
file(GENERATE OUTPUT "${script}" CONTENT "${code}")
set(command ${CMAKE_COMMAND} ${make} ${config} -P ${script})
set(${cmd_var} "${command}" PARENT_SCOPE)
endfunction()
# On multi-config generators, provide a placeholder for a per-config subdir.
# On single-config generators, this is empty.
function(_ep_get_configuration_subdir_genex suffix_var)
set(suffix "")
get_property(_isMultiConfig GLOBAL PROPERTY GENERATOR_IS_MULTI_CONFIG)
if(_isMultiConfig)
set(suffix "/$<CONFIG>")
endif()
set(${suffix_var} "${suffix}" PARENT_SCOPE)
endfunction()
function(_ep_get_step_stampfile
name
step
stampfile_var
)
ExternalProject_Get_Property(${name} stamp_dir)
_ep_get_configuration_subdir_genex(cfgdir)
set(stampfile "${stamp_dir}${cfgdir}/${name}-${step}")
set(${stampfile_var} "${stampfile}" PARENT_SCOPE)
endfunction()
function(_ep_get_complete_stampfile
name
stampfile_var
)
set(cmf_dir ${CMAKE_CURRENT_BINARY_DIR}/CMakeFiles)
_ep_get_configuration_subdir_genex(cfgdir)
set(stampfile "${cmf_dir}${cfgdir}/${name}-complete")
set(${stampfile_var} ${stampfile} PARENT_SCOPE)
endfunction()
function(_ep_step_add_target
name
step
no_deps
)
if(TARGET ${name}-${step})
return()
endif()
get_property(cmp0114 TARGET ${name} PROPERTY _EP_CMP0114)
_ep_get_step_stampfile(${name} ${step} stamp_file)
cmake_policy(PUSH)
if(cmp0114 STREQUAL "NEW")
# To implement CMP0114 NEW behavior with Makefile generators,
# we need CMP0113 NEW behavior.
cmake_policy(SET CMP0113 NEW)
endif()
add_custom_target(${name}-${step} DEPENDS ${stamp_file})
cmake_policy(POP)
set_target_properties(${name}-${step} PROPERTIES
_EP_IS_EXTERNAL_PROJECT_STEP 1
LABELS "${name}"
FOLDER "ExternalProjectTargets/${name}"
)
if(cmp0114 STREQUAL "NEW")
# Add target-level dependencies for the step.
get_property(exclude_from_main
TARGET ${name}
PROPERTY _EP_${step}_EXCLUDE_FROM_MAIN
)
if(NOT exclude_from_main)
add_dependencies(${name} ${name}-${step})
endif()
_ep_step_add_target_dependencies(${name} ${step} ${step})
_ep_step_add_target_dependents(${name} ${step} ${step})
get_property(independent TARGET ${name} PROPERTY _EP_${step}_INDEPENDENT)
else()
if(no_deps AND "${step}" MATCHES "^(configure|build|install|test)$")
message(AUTHOR_WARNING
"Using NO_DEPENDS for \"${step}\" step might break parallel builds"
)
endif()
set(independent ${no_deps})
endif()
# Depend on other external projects (target-level).
if(NOT independent)
get_property(deps TARGET ${name} PROPERTY _EP_DEPENDS)
foreach(arg IN LISTS deps)
add_dependencies(${name}-${step} ${arg})
endforeach()
endif()
endfunction()
function(_ep_step_add_target_dependencies
name
step
node
)
get_property(dependees
TARGET ${name}
PROPERTY _EP_${node}_INTERNAL_DEPENDEES
)
list(REMOVE_DUPLICATES dependees)
foreach(dependee IN LISTS dependees)
get_property(exclude_from_main
TARGET ${name}
PROPERTY _EP_${step}_EXCLUDE_FROM_MAIN
)
get_property(dependee_dependers
TARGET ${name}
PROPERTY _EP_${dependee}_INTERNAL_DEPENDERS
)
if(exclude_from_main OR dependee_dependers MATCHES ";")
# The step on which our step target depends itself has
# dependents in multiple targes. It needs a step target too
# so that there is a unique place for its custom command.
_ep_step_add_target("${name}" "${dependee}" "FALSE")
endif()
if(TARGET ${name}-${dependee})
add_dependencies(${name}-${step} ${name}-${dependee})
else()
_ep_step_add_target_dependencies(${name} ${step} ${dependee})
endif()
endforeach()
endfunction()
function(_ep_step_add_target_dependents
name
step
node
)
get_property(dependers
TARGET ${name}
PROPERTY _EP_${node}_INTERNAL_DEPENDERS
)
list(REMOVE_DUPLICATES dependers)
foreach(depender IN LISTS dependers)
if(TARGET ${name}-${depender})
add_dependencies(${name}-${depender} ${name}-${step})
else()
_ep_step_add_target_dependents(${name} ${step} ${depender})
endif()
endforeach()
endfunction()
function(ExternalProject_Add_StepTargets name)
get_property(cmp0114 TARGET ${name} PROPERTY _EP_CMP0114)
set(steps ${ARGN})
if(ARGC GREATER 1 AND "${ARGV1}" STREQUAL "NO_DEPENDS")
set(no_deps 1)
list(REMOVE_AT steps 0)
else()
set(no_deps 0)
endif()
if(cmp0114 STREQUAL "NEW")
if(no_deps)
message(FATAL_ERROR
"The 'NO_DEPENDS' option is no longer allowed. "
"It has been superseded by the per-step 'INDEPENDENT' option. "
"See policy CMP0114."
)
endif()
elseif(cmp0114 STREQUAL "")
cmake_policy(GET_WARNING CMP0114 _cmp0114_warning)
string(APPEND _cmp0114_warning "\n"
"ExternalProject target '${name}' would depend on the targets for "
"step(s) '${steps}' under policy CMP0114, but this is being left out "
"for compatibility since the policy is not set."
)
if(no_deps)
string(APPEND _cmp0114_warning " "
"Also, the NO_DEPENDS option is deprecated in favor of policy CMP0114."
)
endif()
message(AUTHOR_WARNING "${_cmp0114_warning}")
endif()
foreach(step ${steps})
_ep_step_add_target("${name}" "${step}" "${no_deps}")
endforeach()
endfunction()
function(ExternalProject_Add_Step name step)
get_property(cmp0114 TARGET ${name} PROPERTY _EP_CMP0114)
_ep_get_complete_stampfile(${name} complete_stamp_file)
_ep_get_step_stampfile(${name} ${step} stamp_file)
set(keywords
COMMAND
COMMENT
DEPENDEES
DEPENDERS
DEPENDS
INDEPENDENT
BYPRODUCTS
ALWAYS
JOB_SERVER_AWARE
EXCLUDE_FROM_MAIN
WORKING_DIRECTORY
LOG
USES_TERMINAL
)
_ep_parse_arguments(
ExternalProject_Add_Step
"${keywords}"
${name}
_EP_${step}_
"${ARGN}"
)
get_property(independent
TARGET ${name}
PROPERTY _EP_${step}_INDEPENDENT
)
if(independent STREQUAL "")
set(independent FALSE)
set_property(TARGET ${name} PROPERTY
_EP_${step}_INDEPENDENT "${independent}"
)
endif()
get_property(exclude_from_main
TARGET ${name}
PROPERTY _EP_${step}_EXCLUDE_FROM_MAIN
)
if(NOT exclude_from_main)
add_custom_command(APPEND
OUTPUT ${complete_stamp_file}
DEPENDS ${stamp_file}
)
endif()
# Steps depending on this step.
get_property(dependers TARGET ${name} PROPERTY _EP_${step}_DEPENDERS)
set_property(TARGET ${name} APPEND PROPERTY
_EP_${step}_INTERNAL_DEPENDERS ${dependers}
)
foreach(depender IN LISTS dependers)
set_property(TARGET ${name} APPEND PROPERTY
_EP_${depender}_INTERNAL_DEPENDEES ${step}
)
_ep_get_step_stampfile(${name} ${depender} depender_stamp_file)
add_custom_command(APPEND
OUTPUT ${depender_stamp_file}
DEPENDS ${stamp_file}
)
if(cmp0114 STREQUAL "NEW" AND NOT independent)
get_property(dep_independent
TARGET ${name}
PROPERTY _EP_${depender}_INDEPENDENT
)
if(dep_independent)
message(FATAL_ERROR
"ExternalProject '${name}' step '${depender}' is marked INDEPENDENT "
"but depends on step '${step}' that is not marked INDEPENDENT."
)
endif()
endif()
endforeach()
# Dependencies on files.
get_property(depends TARGET ${name} PROPERTY _EP_${step}_DEPENDS)
# Byproducts of the step.
get_property(byproducts TARGET ${name} PROPERTY _EP_${step}_BYPRODUCTS)
# Dependencies on steps.
get_property(dependees TARGET ${name} PROPERTY _EP_${step}_DEPENDEES)
set_property(TARGET ${name} APPEND PROPERTY
_EP_${step}_INTERNAL_DEPENDEES ${dependees}
)
foreach(dependee IN LISTS dependees)
set_property(TARGET ${name} APPEND PROPERTY
_EP_${dependee}_INTERNAL_DEPENDERS ${step}
)
_ep_get_step_stampfile(${name} ${dependee} dependee_stamp_file)
list(APPEND depends ${dependee_stamp_file})
if(cmp0114 STREQUAL "NEW" AND independent)
get_property(dep_independent
TARGET ${name}
PROPERTY _EP_${dependee}_INDEPENDENT
)
if(NOT dep_independent)
message(FATAL_ERROR
"ExternalProject '${name}' step '${step}' is marked INDEPENDENT "
"but depends on step '${dependee}' that is not marked INDEPENDENT."
)
endif()
endif()
endforeach()
# The command to run.
get_property(command TARGET ${name} PROPERTY _EP_${step}_COMMAND)
if(command)
set(comment "Performing ${step} step for '${name}'")
else()
set(comment "No ${step} step for '${name}'")
endif()
get_property(work_dir
TARGET ${name}
PROPERTY _EP_${step}_WORKING_DIRECTORY
)
# Replace list separators.
get_property(sep
TARGET ${name}
PROPERTY _EP_LIST_SEPARATOR
)
if(sep AND command)
string(REPLACE "${sep}" "\\;" command "${command}")
endif()
# Replace location tags.
_ep_replace_location_tags(
${name}
comment
command
work_dir
byproducts
)
# Custom comment?
get_property(comment_set
TARGET ${name}
PROPERTY _EP_${step}_COMMENT
SET
)
if(comment_set)
get_property(comment
TARGET ${name}
PROPERTY _EP_${step}_COMMENT
)
endif()
# Uses terminal?
get_property(uses_terminal
TARGET ${name}
PROPERTY _EP_${step}_USES_TERMINAL
)
if(uses_terminal)
set(uses_terminal USES_TERMINAL)
else()
set(uses_terminal "")
endif()
# Run every time?
get_property(always
TARGET ${name}
PROPERTY _EP_${step}_ALWAYS
)
if(always)
set(maybe_COMMAND_touch "")
# Mark stamp files for all configs as SYMBOLIC since we do not create them.
# Remove any existing stamp in case the option changed in an existing tree.
get_property(_isMultiConfig GLOBAL PROPERTY GENERATOR_IS_MULTI_CONFIG)
if(_isMultiConfig)
_ep_get_configuration_subdir_genex(cfgdir)
foreach(cfg ${CMAKE_CONFIGURATION_TYPES})
string(REPLACE "${cfgdir}" "/${cfg}"
stamp_file_config "${stamp_file}"
)
set_property(SOURCE ${stamp_file_config} PROPERTY SYMBOLIC 1)
file(REMOVE ${stamp_file_config})
endforeach()
if(CMAKE_GENERATOR STREQUAL "Xcode")
# See Xcode case in _ep_get_configuration_subdir_genex.
set_property(SOURCE ${stamp_file} PROPERTY SYMBOLIC 1)
endif()
else()
set_property(SOURCE ${stamp_file} PROPERTY SYMBOLIC 1)
file(REMOVE ${stamp_file})
endif()
else()
set(maybe_COMMAND_touch "COMMAND \${CMAKE_COMMAND} -E touch \${stamp_file}")
endif()
get_property(job_server_aware
TARGET ${name}
PROPERTY _EP_${step}_JOB_SERVER_AWARE
)
if(job_server_aware)
set(maybe_JOB_SERVER_AWARE "JOB_SERVER_AWARE 1")
else()
set(maybe_JOB_SERVER_AWARE "")
endif()
# Wrap with log script?
get_property(log TARGET ${name} PROPERTY _EP_${step}_LOG)
if(command AND log)
_ep_write_log_script(${name} ${step} command)
endif()
if("${command}" STREQUAL "")
# Some generators (i.e. Xcode) will not generate a file level target
# if no command is set, and therefore the dependencies on this
# target will be broken.
# The empty command is replaced by an echo command here in order to
# avoid this issue.
set(command ${CMAKE_COMMAND} -E echo_append)
endif()
set(__cmdQuoted)
foreach(__item IN LISTS command)
string(APPEND __cmdQuoted " [==[${__item}]==]")
endforeach()
cmake_language(EVAL CODE "
add_custom_command(
OUTPUT \${stamp_file}
BYPRODUCTS \${byproducts}
COMMENT \${comment}
COMMAND ${__cmdQuoted}
${maybe_COMMAND_touch}
${maybe_JOB_SERVER_AWARE}
DEPENDS \${depends}
WORKING_DIRECTORY \${work_dir}
VERBATIM
${uses_terminal}
)"
)
set_property(TARGET ${name} APPEND PROPERTY _EP_STEPS ${step})
# Add custom "step target"?
get_property(step_targets
TARGET ${name}
PROPERTY _EP_STEP_TARGETS
)
if(NOT step_targets)
get_property(step_targets
DIRECTORY
PROPERTY EP_STEP_TARGETS
)
endif()
foreach(st ${step_targets})
if("${st}" STREQUAL "${step}")
_ep_step_add_target("${name}" "${step}" "FALSE")
break()
endif()
endforeach()
get_property(independent_step_targets
TARGET ${name} PROPERTY
_EP_INDEPENDENT_STEP_TARGETS
)
if(NOT independent_step_targets)
get_property(independent_step_targets
DIRECTORY
PROPERTY EP_INDEPENDENT_STEP_TARGETS
)
endif()
if(cmp0114 STREQUAL "NEW")
if(independent_step_targets)
message(FATAL_ERROR
"ExternalProject '${name}' option 'INDEPENDENT_STEP_TARGETS' is set to"
"\n ${independent_step_targets}\n"
"but the option is no longer allowed. "
"It has been superseded by the per-step 'INDEPENDENT' option. "
"See policy CMP0114."
)
endif()
else()
if(independent_step_targets AND cmp0114 STREQUAL "")
get_property(warned
TARGET ${name}
PROPERTY _EP_CMP0114_WARNED_INDEPENDENT_STEP_TARGETS
)
if(NOT warned)
set_property(TARGET ${name} PROPERTY
_EP_CMP0114_WARNED_INDEPENDENT_STEP_TARGETS 1
)
cmake_policy(GET_WARNING CMP0114 _cmp0114_warning)
string(APPEND _cmp0114_warning
"\n"
"ExternalProject '${name}' option INDEPENDENT_STEP_TARGETS is set to"
"\n ${independent_step_targets}\n"
"but the option is deprecated in favor of policy CMP0114."
)
message(AUTHOR_WARNING "${_cmp0114_warning}")
endif()
endif()
foreach(st ${independent_step_targets})
if("${st}" STREQUAL "${step}")
_ep_step_add_target("${name}" "${step}" "TRUE")
break()
endif()
endforeach()
endif()
endfunction()
function(ExternalProject_Add_StepDependencies name step)
set(dependencies ${ARGN})
# Sanity checks on "name" and "step".
if(NOT TARGET ${name})
message(FATAL_ERROR
"Cannot find target \"${name}\". Perhaps it has not yet been created "
"using ExternalProject_Add."
)
endif()
get_property(type TARGET ${name} PROPERTY TYPE)
if(NOT type STREQUAL "UTILITY")
message(FATAL_ERROR
"Target \"${name}\" was not generated by ExternalProject_Add."
)
endif()
get_property(is_ep TARGET ${name} PROPERTY _EP_IS_EXTERNAL_PROJECT)
if(NOT is_ep)
message(FATAL_ERROR
"Target \"${name}\" was not generated by ExternalProject_Add."
)
endif()
get_property(steps TARGET ${name} PROPERTY _EP_STEPS)
list(FIND steps ${step} is_step)
if(is_step LESS 0)
message(FATAL_ERROR
"External project \"${name}\" does not have a step \"${step}\"."
)
endif()
if(TARGET ${name}-${step})
get_property(type TARGET ${name}-${step} PROPERTY TYPE)
if(NOT type STREQUAL "UTILITY")
message(FATAL_ERROR
"Target \"${name}-${step}\" was not generated by "
"ExternalProject_Add_StepTargets."
)
endif()
get_property(is_ep_step
TARGET ${name}-${step}
PROPERTY _EP_IS_EXTERNAL_PROJECT_STEP
)
if(NOT is_ep_step)
message(FATAL_ERROR
"Target \"${name}-${step}\" was not generated by "
"ExternalProject_Add_StepTargets."
)
endif()
endif()
# Always add file-level dependency, but add target-level dependency
# only if the target exists for that step.
_ep_get_step_stampfile(${name} ${step} stamp_file)
foreach(dep ${dependencies})
add_custom_command(APPEND
OUTPUT ${stamp_file}
DEPENDS ${dep}
)
if(TARGET ${name}-${step})
foreach(dep ${dependencies})
add_dependencies(${name}-${step} ${dep})
endforeach()
endif()
endforeach()
endfunction()
function(_ep_add_mkdir_command name)
ExternalProject_Get_Property(${name} tmp_dir)
set(script_filename "${tmp_dir}/${name}-mkdirs.cmake")
_ep_get_configuration_subdir_genex(cfgdir)
ExternalProject_Add_Step(${name} mkdir
INDEPENDENT TRUE
COMMENT "Creating directories for '${name}'"
COMMAND ${CMAKE_COMMAND} -Dcfgdir=${cfgdir} -P ${script_filename}
)
endfunction()
function(_ep_is_dir_empty dir empty_var)
file(GLOB gr "${dir}/*")
if("${gr}" STREQUAL "")
set(${empty_var} 1 PARENT_SCOPE)
else()
set(${empty_var} 0 PARENT_SCOPE)
endif()
endfunction()
function(_ep_get_git_submodules_recurse git_submodules_recurse)
# Checks for GIT_SUBMODULES_RECURSE property. Default is ON, which sets
# git_submodules_recurse output variable to "--recursive". Otherwise, the
# output variable is set to an empty value "".
get_property(git_submodules_recurse_set
TARGET ${name}
PROPERTY _EP_GIT_SUBMODULES_RECURSE
SET
)
if(NOT git_submodules_recurse_set)
set(recurseFlag "--recursive")
else()
get_property(git_submodules_recurse_value
TARGET ${name}
PROPERTY _EP_GIT_SUBMODULES_RECURSE
)
if(git_submodules_recurse_value)
set(recurseFlag "--recursive")
else()
set(recurseFlag "")
endif()
endif()
set(${git_submodules_recurse} "${recurseFlag}" PARENT_SCOPE)
# The git submodule update '--recursive' flag requires git >= v1.6.5
if(recurseFlag AND GIT_VERSION_STRING VERSION_LESS 1.6.5)
message(FATAL_ERROR
"git version 1.6.5 or later required for --recursive flag with "
"'git submodule ...': GIT_VERSION_STRING='${GIT_VERSION_STRING}'"
)
endif()
endfunction()
function(_ep_add_download_command name)
ExternalProject_Get_Property(${name}
source_dir
stamp_dir
download_dir
tmp_dir
)
get_property(cmd_set TARGET ${name} PROPERTY _EP_DOWNLOAD_COMMAND SET)
get_property(cmd TARGET ${name} PROPERTY _EP_DOWNLOAD_COMMAND)
get_property(cvs_repository TARGET ${name} PROPERTY _EP_CVS_REPOSITORY)
get_property(svn_repository TARGET ${name} PROPERTY _EP_SVN_REPOSITORY)
get_property(git_repository TARGET ${name} PROPERTY _EP_GIT_REPOSITORY)
get_property(hg_repository TARGET ${name} PROPERTY _EP_HG_REPOSITORY )
get_property(url TARGET ${name} PROPERTY _EP_URL)
get_property(fname TARGET ${name} PROPERTY _EP_DOWNLOAD_NAME)
# TODO: Perhaps file:// should be copied to download dir before extraction.
string(REGEX REPLACE "file://" "" url "${url}")
set(depends)
set(comment)
set(work_dir)
set(extra_repo_info)
set(byproduct_file)
if(cmd_set)
set(work_dir ${download_dir})
set(method custom)
elseif(cvs_repository)
set(method cvs)
find_package(CVS QUIET)
if(NOT CVS_EXECUTABLE)
message(FATAL_ERROR "error: could not find cvs for checkout of ${name}")
endif()
get_target_property(cvs_module ${name} _EP_CVS_MODULE)
if(NOT cvs_module)
message(FATAL_ERROR "error: no CVS_MODULE")
endif()
get_property(cvs_tag TARGET ${name} PROPERTY _EP_CVS_TAG)
get_filename_component(src_name "${source_dir}" NAME)
get_filename_component(work_dir "${source_dir}" PATH)
set(comment "Performing download step (CVS checkout) for '${name}'")
set(cmd
${CVS_EXECUTABLE}
-d ${cvs_repository}
-q
co ${cvs_tag}
-d ${src_name}
${cvs_module}
)
elseif(svn_repository)
set(method svn)
find_package(Subversion QUIET)
if(NOT Subversion_SVN_EXECUTABLE)
message(FATAL_ERROR "error: could not find svn for checkout of ${name}")
endif()
get_property(svn_revision TARGET ${name} PROPERTY _EP_SVN_REVISION)
get_property(svn_username TARGET ${name} PROPERTY _EP_SVN_USERNAME)
get_property(svn_password TARGET ${name} PROPERTY _EP_SVN_PASSWORD)
get_property(svn_trust_cert TARGET ${name} PROPERTY _EP_SVN_TRUST_CERT)
get_property(uses_terminal
TARGET ${name}
PROPERTY _EP_USES_TERMINAL_DOWNLOAD
)
# The --trust-server-cert option requires --non-interactive
if(uses_terminal AND NOT svn_trust_cert)
set(svn_interactive_args "")
else()
set(svn_interactive_args "--non-interactive")
endif()
get_filename_component(src_name "${source_dir}" NAME)
get_filename_component(work_dir "${source_dir}" PATH)
set(comment "Performing download step (SVN checkout) for '${name}'")
set(svn_user_pw_args "")
if(DEFINED svn_username)
set(svn_user_pw_args ${svn_user_pw_args} "--username=${svn_username}")
endif()
if(DEFINED svn_password)
set(svn_user_pw_args ${svn_user_pw_args} "--password=${svn_password}")
endif()
if(svn_trust_cert)
set(svn_trust_cert_args --trust-server-cert)
endif()
set(cmd
${Subversion_SVN_EXECUTABLE}
co
${svn_repository}
${svn_revision}
${svn_interactive_args}
${svn_trust_cert_args}
${svn_user_pw_args}
${src_name}
)
elseif(git_repository)
set(method git)
# FetchContent gives us these directly, so don't try to recompute them
if(NOT GIT_EXECUTABLE OR NOT GIT_VERSION_STRING)
unset(CMAKE_MODULE_PATH) # Use CMake builtin find module
find_package(Git QUIET)
if(NOT GIT_EXECUTABLE)
message(FATAL_ERROR "error: could not find git for clone of ${name}")
endif()
endif()
_ep_get_git_submodules_recurse(git_submodules_recurse)
get_property(git_tag TARGET ${name} PROPERTY _EP_GIT_TAG)
if(NOT git_tag)
set(git_tag "master")
endif()
set(git_init_submodules TRUE)
get_property(git_submodules_set
TARGET ${name}
PROPERTY _EP_GIT_SUBMODULES SET
)
if(git_submodules_set)
get_property(git_submodules TARGET ${name} PROPERTY _EP_GIT_SUBMODULES)
if(git_submodules STREQUAL "" AND _EP_CMP0097 STREQUAL "NEW")
set(git_init_submodules FALSE)
endif()
endif()
get_property(git_remote_name TARGET ${name} PROPERTY _EP_GIT_REMOTE_NAME)
if(NOT git_remote_name)
set(git_remote_name "origin")
endif()
get_property(tls_verify TARGET ${name} PROPERTY _EP_TLS_VERIFY)
if("x${tls_verify}" STREQUAL "x" AND DEFINED CMAKE_TLS_VERIFY)
set(tls_verify "${CMAKE_TLS_VERIFY}")
endif()
get_property(git_shallow TARGET ${name} PROPERTY _EP_GIT_SHALLOW)
get_property(git_progress TARGET ${name} PROPERTY _EP_GIT_PROGRESS)
get_property(git_config TARGET ${name} PROPERTY _EP_GIT_CONFIG)
# If git supports it, make checkouts quiet when checking out a git hash.
# This avoids the very noisy detached head message.
if(GIT_VERSION_STRING VERSION_GREATER_EQUAL 1.7.7)
list(PREPEND git_config advice.detachedHead=false)
endif()
# The command doesn't expose any details, so we need to record additional
# information in the RepositoryInfo.txt file. For the download step, only
# the things specifically affecting the clone operation should be recorded.
# If the repo changes, the clone script should be run again.
# But if only the tag changes, avoid running the clone script again.
# Let the 'always' running update step checkout the new tag.
#
set(extra_repo_info
"repository=${git_repository}
remote=${git_remote_name}
init_submodules=${git_init_submodules}
recurse_submodules=${git_submodules_recurse}
submodules=${git_submodules}
CMP0097=${_EP_CMP0097}
")
get_filename_component(src_name "${source_dir}" NAME)
get_filename_component(work_dir "${source_dir}" PATH)
# Since git clone doesn't succeed if the non-empty source_dir exists,
# create a cmake script to invoke as download command.
# The script will delete the source directory and then call git clone.
#
_ep_write_gitclone_script(
${tmp_dir}/${name}-gitclone.cmake
${source_dir}
${GIT_EXECUTABLE}
${git_repository}
${git_tag}
${git_remote_name}
${git_init_submodules}
"${git_submodules_recurse}"
"${git_submodules}"
"${git_shallow}"
"${git_progress}"
"${git_config}"
${src_name}
${work_dir}
${stamp_dir}/${name}-gitinfo.txt
${stamp_dir}/${name}-gitclone-lastrun.txt
"${tls_verify}"
)
set(comment "Performing download step (git clone) for '${name}'")
set(cmd ${CMAKE_COMMAND} -P ${tmp_dir}/${name}-gitclone.cmake)
elseif(hg_repository)
set(method hg)
find_package(Hg QUIET)
if(NOT HG_EXECUTABLE)
message(FATAL_ERROR "error: could not find hg for clone of ${name}")
endif()
get_property(hg_tag TARGET ${name} PROPERTY _EP_HG_TAG)
if(NOT hg_tag)
set(hg_tag "tip")
endif()
# The command doesn't expose any details, so we need to record additional
# information in the RepositoryInfo.txt file. For the download step, only
# the things specifically affecting the clone operation should be recorded.
# If the repo changes, the clone script should be run again.
# But if only the tag changes, avoid running the clone script again.
# Let the 'always' running update step checkout the new tag.
#
set(extra_repo_info "repository=${hg_repository}")
get_filename_component(src_name "${source_dir}" NAME)
get_filename_component(work_dir "${source_dir}" PATH)
# Since hg clone doesn't succeed if the non-empty source_dir exists,
# create a cmake script to invoke as download command.
# The script will delete the source directory and then call hg clone.
#
_ep_write_hgclone_script(
${tmp_dir}/${name}-hgclone.cmake
${source_dir}
${HG_EXECUTABLE}
${hg_repository}
${hg_tag}
${src_name}
${work_dir}
${stamp_dir}/${name}-hginfo.txt
${stamp_dir}/${name}-hgclone-lastrun.txt
)
set(comment "Performing download step (hg clone) for '${name}'")
set(cmd ${CMAKE_COMMAND} -P ${tmp_dir}/${name}-hgclone.cmake)
elseif(url)
set(method url)
get_filename_component(work_dir "${source_dir}" PATH)
get_property(hash TARGET ${name} PROPERTY _EP_URL_HASH)
_ep_get_hash_regex(_ep_hash_regex)
if(hash AND NOT "${hash}" MATCHES "${_ep_hash_regex}")
_ep_get_hash_algos(_ep_hash_algos)
list(JOIN _ep_hash_algos "|" _ep_hash_algos)
message(FATAL_ERROR
"URL_HASH is set to\n"
" ${hash}\n"
"but must be ALGO=value where ALGO is\n"
" ${_ep_hash_algos}\n"
"and value is a hex string."
)
endif()
get_property(md5 TARGET ${name} PROPERTY _EP_URL_MD5)
if(md5 AND NOT "MD5=${md5}" MATCHES "${_ep_hash_regex}")
message(FATAL_ERROR
"URL_MD5 is set to\n"
" ${md5}\n"
"but must be a hex string."
)
endif()
if(md5 AND NOT hash)
set(hash "MD5=${md5}")
endif()
set(extra_repo_info
"url(s)=${url}
hash=${hash}
")
list(LENGTH url url_list_length)
if(NOT "${url_list_length}" STREQUAL "1")
foreach(entry ${url})
if(NOT "${entry}" MATCHES "^[a-z]+://")
message(FATAL_ERROR
"At least one entry of URL is a path (invalid in a list)"
)
endif()
endforeach()
if("x${fname}" STREQUAL "x")
list(GET url 0 fname)
endif()
endif()
if(IS_DIRECTORY "${url}")
get_filename_component(abs_dir "${url}" ABSOLUTE)
set(comment "Performing download step (DIR copy) for '${name}'")
set(cmd
${CMAKE_COMMAND} -E rm -rf ${source_dir}
COMMAND ${CMAKE_COMMAND} -E copy_directory ${abs_dir} ${source_dir}
)
else()
get_property(no_extract
TARGET "${name}"
PROPERTY _EP_DOWNLOAD_NO_EXTRACT
)
string(APPEND extra_repo_info "no_extract=${no_extract}\n")
if("${url}" MATCHES "^[a-z]+://")
# TODO: Should download and extraction be different steps?
if("x${fname}" STREQUAL "x")
set(fname "${url}")
endif()
set(ext_regex [[7z|tar|tar\.bz2|tar\.gz|tar\.xz|tbz2|tgz|txz|zip]])
if("${fname}" MATCHES "([^/\\?#]+(\\.|=)(${ext_regex}))([/?#].*)?$")
set(fname "${CMAKE_MATCH_1}")
elseif(no_extract)
get_filename_component(fname "${fname}" NAME)
else()
# Fall back to a default file name. The actual file name does not
# matter as long as it doesn't conflict with other projects because
# it is used only internally and our extraction tool inspects the
# file content directly. If it turns out the wrong URL was given
# that will be revealed during the build which is an easier place for
# users to diagnose than an error here anyway.
set(fname "${name}-archive.tar")
endif()
string(REPLACE ";" "-" fname "${fname}")
set(file ${download_dir}/${fname})
set(byproduct_file "${download_dir}/${fname}")
get_property(timeout TARGET ${name} PROPERTY _EP_TIMEOUT)
get_property(inactivity_timeout
TARGET ${name}
PROPERTY _EP_INACTIVITY_TIMEOUT
)
get_property(no_progress
TARGET ${name}
PROPERTY _EP_DOWNLOAD_NO_PROGRESS
)
get_property(tls_verify TARGET ${name} PROPERTY _EP_TLS_VERIFY)
get_property(tls_cainfo TARGET ${name} PROPERTY _EP_TLS_CAINFO)
get_property(netrc TARGET ${name} PROPERTY _EP_NETRC)
get_property(netrc_file TARGET ${name} PROPERTY _EP_NETRC_FILE)
get_property(http_username TARGET ${name} PROPERTY _EP_HTTP_USERNAME)
get_property(http_password TARGET ${name} PROPERTY _EP_HTTP_PASSWORD)
get_property(http_headers TARGET ${name} PROPERTY _EP_HTTP_HEADER)
set(download_script "${stamp_dir}/download-${name}.cmake")
_ep_write_downloadfile_script(
"${download_script}"
"${url}"
"${file}"
"${timeout}"
"${inactivity_timeout}"
"${no_progress}"
"${hash}"
"${tls_verify}"
"${tls_cainfo}"
"${http_username}:${http_password}"
"${http_headers}"
"${netrc}"
"${netrc_file}"
)
set(cmd
${CMAKE_COMMAND} -P "${download_script}"
COMMAND
)
if (no_extract)
set(steps "download and verify")
else ()
set(steps "download, verify and extract")
endif ()
set(comment "Performing download step (${steps}) for '${name}'")
# already verified by 'download_script'
file(WRITE "${stamp_dir}/verify-${name}.cmake" "")
# Rather than adding everything to the RepositoryInfo.txt file, it is
# more robust to just depend on the download script. That way, we will
# re-download if any aspect of the download changes.
list(APPEND depends "${download_script}")
else()
set(file "${url}")
if (no_extract)
set(steps "verify")
else ()
set(steps "verify and extract")
endif ()
set(comment "Performing download step (${steps}) for '${name}'")
_ep_write_verifyfile_script(
"${stamp_dir}/verify-${name}.cmake"
"${file}"
"${hash}"
)
endif()
list(APPEND cmd ${CMAKE_COMMAND} -P ${stamp_dir}/verify-${name}.cmake)
get_target_property(extract_timestamp ${name}
_EP_DOWNLOAD_EXTRACT_TIMESTAMP
)
if(no_extract)
if(NOT extract_timestamp STREQUAL "extract_timestamp-NOTFOUND")
message(FATAL_ERROR
"Cannot specify DOWNLOAD_EXTRACT_TIMESTAMP when using "
"DOWNLOAD_NO_EXTRACT TRUE"
)
endif()
set_property(TARGET ${name} PROPERTY _EP_DOWNLOADED_FILE ${file})
else()
if(extract_timestamp STREQUAL "extract_timestamp-NOTFOUND")
# Default depends on policy CMP0135
if(_EP_CMP0135 STREQUAL "")
message(AUTHOR_WARNING
"The DOWNLOAD_EXTRACT_TIMESTAMP option was not given and policy "
"CMP0135 is not set. The policy's OLD behavior will be used. "
"When using a URL download, the timestamps of extracted files "
"should preferably be that of the time of extraction, otherwise "
"code that depends on the extracted contents might not be "
"rebuilt if the URL changes. The OLD behavior preserves the "
"timestamps from the archive instead, but this is usually not "
"what you want. Update your project to the NEW behavior or "
"specify the DOWNLOAD_EXTRACT_TIMESTAMP option with a value of "
"true to avoid this robustness issue."
)
set(extract_timestamp TRUE)
elseif(_EP_CMP0135 STREQUAL "NEW")
set(extract_timestamp FALSE)
else()
set(extract_timestamp TRUE)
endif()
endif()
if(extract_timestamp)
set(options "")
else()
set(options "--touch")
endif()
_ep_write_extractfile_script(
"${stamp_dir}/extract-${name}.cmake"
"${name}"
"${file}"
"${source_dir}"
"${options}"
)
list(APPEND cmd
COMMAND ${CMAKE_COMMAND} -P ${stamp_dir}/extract-${name}.cmake
)
endif ()
endif()
else()
set(method source_dir)
_ep_is_dir_empty("${source_dir}" empty)
if(${empty})
message(FATAL_ERROR
"No download info given for '${name}' and its source directory:\n"
" ${source_dir}\n"
"is not an existing non-empty directory. Please specify one of:\n"
" * SOURCE_DIR with an existing non-empty directory\n"
" * DOWNLOAD_COMMAND\n"
" * URL\n"
" * GIT_REPOSITORY\n"
" * SVN_REPOSITORY\n"
" * HG_REPOSITORY\n"
" * CVS_REPOSITORY and CVS_MODULE"
)
endif()
endif()
# We use configure_file() to write the repo_info_file so that the file's
# timestamp is not updated if we don't change the contents
set(repo_info_file ${stamp_dir}/${name}-${method}info.txt)
list(APPEND depends ${repo_info_file})
configure_file(
"${CMAKE_CURRENT_FUNCTION_LIST_DIR}/ExternalProject/RepositoryInfo.txt.in"
"${repo_info_file}"
@ONLY
)
get_property(log
TARGET ${name}
PROPERTY _EP_LOG_DOWNLOAD
)
if(log)
set(log LOG 1)
else()
set(log "")
endif()
get_property(uses_terminal
TARGET ${name}
PROPERTY _EP_USES_TERMINAL_DOWNLOAD
)
if(uses_terminal)
set(uses_terminal USES_TERMINAL 1)
else()
set(uses_terminal "")
endif()
set(__cmdQuoted)
foreach(__item IN LISTS cmd)
string(APPEND __cmdQuoted " [==[${__item}]==]")
endforeach()
cmake_language(EVAL CODE "
ExternalProject_Add_Step(\${name} download
INDEPENDENT TRUE
COMMENT \${comment}
COMMAND ${__cmdQuoted}
WORKING_DIRECTORY \${work_dir}
DEPENDS \${depends}
BYPRODUCTS \${byproduct_file}
DEPENDEES mkdir
${log}
${uses_terminal}
)"
)
endfunction()
function(_ep_get_update_disconnected var name)
get_property(update_disconnected_set
TARGET ${name}
PROPERTY _EP_UPDATE_DISCONNECTED
SET
)
if(update_disconnected_set)
get_property(update_disconnected
TARGET ${name}
PROPERTY _EP_UPDATE_DISCONNECTED
)
else()
get_property(update_disconnected
DIRECTORY
PROPERTY EP_UPDATE_DISCONNECTED
)
endif()
set(${var} "${update_disconnected}" PARENT_SCOPE)
endfunction()
function(_ep_add_update_command name)
ExternalProject_Get_Property(${name} source_dir stamp_dir tmp_dir)
get_property(cmd_set TARGET ${name} PROPERTY _EP_UPDATE_COMMAND SET)
get_property(cmd TARGET ${name} PROPERTY _EP_UPDATE_COMMAND)
get_property(cvs_repository TARGET ${name} PROPERTY _EP_CVS_REPOSITORY)
get_property(svn_repository TARGET ${name} PROPERTY _EP_SVN_REPOSITORY)
get_property(git_repository TARGET ${name} PROPERTY _EP_GIT_REPOSITORY)
get_property(hg_repository TARGET ${name} PROPERTY _EP_HG_REPOSITORY )
_ep_get_update_disconnected(update_disconnected ${name})
set(work_dir)
set(comment)
set(always)
set(file_deps)
if(cmd_set)
set(work_dir ${source_dir})
if(NOT "x${cmd}" STREQUAL "x")
set(always 1)
endif()
elseif(cvs_repository)
if(NOT CVS_EXECUTABLE)
message(FATAL_ERROR "error: could not find cvs for update of ${name}")
endif()
set(work_dir ${source_dir})
set(comment "Performing update step (CVS update) for '${name}'")
get_property(cvs_tag TARGET ${name} PROPERTY _EP_CVS_TAG)
set(cmd ${CVS_EXECUTABLE} -d ${cvs_repository} -q up -dP ${cvs_tag})
set(always 1)
elseif(svn_repository)
if(NOT Subversion_SVN_EXECUTABLE)
message(FATAL_ERROR "error: could not find svn for update of ${name}")
endif()
set(work_dir ${source_dir})
set(comment "Performing update step (SVN update) for '${name}'")
get_property(svn_revision TARGET ${name} PROPERTY _EP_SVN_REVISION)
get_property(svn_username TARGET ${name} PROPERTY _EP_SVN_USERNAME)
get_property(svn_password TARGET ${name} PROPERTY _EP_SVN_PASSWORD)
get_property(svn_trust_cert TARGET ${name} PROPERTY _EP_SVN_TRUST_CERT)
get_property(uses_terminal TARGET ${name} PROPERTY _EP_USES_TERMINAL_UPDATE)
# The --trust-server-cert option requires --non-interactive
if(uses_terminal AND NOT svn_trust_cert)
set(svn_interactive_args "")
else()
set(svn_interactive_args "--non-interactive")
endif()
set(svn_user_pw_args "")
if(DEFINED svn_username)
set(svn_user_pw_args ${svn_user_pw_args} "--username=${svn_username}")
endif()
if(DEFINED svn_password)
set(svn_user_pw_args ${svn_user_pw_args} "--password=${svn_password}")
endif()
if(svn_trust_cert)
set(svn_trust_cert_args --trust-server-cert)
endif()
set(cmd
${Subversion_SVN_EXECUTABLE}
up
${svn_revision}
${svn_interactive_args}
${svn_trust_cert_args}
${svn_user_pw_args}
)
set(always 1)
elseif(git_repository)
# FetchContent gives us these directly, so don't try to recompute them
if(NOT GIT_EXECUTABLE OR NOT GIT_VERSION_STRING)
unset(CMAKE_MODULE_PATH) # Use CMake builtin find module
find_package(Git QUIET)
if(NOT GIT_EXECUTABLE)
message(FATAL_ERROR "error: could not find git for fetch of ${name}")
endif()
endif()
set(work_dir ${source_dir})
set(comment "Performing update step for '${name}'")
set(comment_disconnected "Performing disconnected update step for '${name}'")
get_property(git_tag
TARGET ${name}
PROPERTY _EP_GIT_TAG
)
if(NOT git_tag)
set(git_tag "master")
endif()
get_property(git_remote_name
TARGET ${name}
PROPERTY _EP_GIT_REMOTE_NAME
)
if(NOT git_remote_name)
set(git_remote_name "origin")
endif()
set(git_init_submodules TRUE)
get_property(git_submodules_set
TARGET ${name}
PROPERTY _EP_GIT_SUBMODULES
SET
)
if(git_submodules_set)
get_property(git_submodules
TARGET ${name}
PROPERTY _EP_GIT_SUBMODULES
)
if(git_submodules STREQUAL "" AND _EP_CMP0097 STREQUAL "NEW")
set(git_init_submodules FALSE)
endif()
endif()
get_property(git_update_strategy
TARGET ${name}
PROPERTY _EP_GIT_REMOTE_UPDATE_STRATEGY
)
if(NOT git_update_strategy)
set(git_update_strategy "${CMAKE_EP_GIT_REMOTE_UPDATE_STRATEGY}")
endif()
if(NOT git_update_strategy)
set(git_update_strategy REBASE)
endif()
set(strategies CHECKOUT REBASE REBASE_CHECKOUT)
if(NOT git_update_strategy IN_LIST strategies)
message(FATAL_ERROR
"'${git_update_strategy}' is not one of the supported strategies: "
"${strategies}"
)
endif()
_ep_get_git_submodules_recurse(git_submodules_recurse)
get_property(tls_verify TARGET ${name} PROPERTY _EP_TLS_VERIFY)
if("x${tls_verify}" STREQUAL "x" AND DEFINED CMAKE_TLS_VERIFY)
set(tls_verify "${CMAKE_TLS_VERIFY}")
endif()
set(update_script "${tmp_dir}/${name}-gitupdate.cmake")
list(APPEND file_deps ${update_script})
_ep_write_gitupdate_script(
"${update_script}"
"${GIT_EXECUTABLE}"
"${git_tag}"
"${git_remote_name}"
"${git_init_submodules}"
"${git_submodules_recurse}"
"${git_submodules}"
"${git_repository}"
"${work_dir}"
"${git_update_strategy}"
"${tls_verify}"
)
set(cmd ${CMAKE_COMMAND} -Dcan_fetch=YES -P ${update_script})
set(cmd_disconnected ${CMAKE_COMMAND} -Dcan_fetch=NO -P ${update_script})
set(always 1)
elseif(hg_repository)
if(NOT HG_EXECUTABLE)
message(FATAL_ERROR "error: could not find hg for pull of ${name}")
endif()
set(work_dir ${source_dir})
set(comment "Performing update step (hg pull) for '${name}'")
set(comment_disconnected "Performing disconnected update step for '${name}'")
get_property(hg_tag
TARGET ${name}
PROPERTY _EP_HG_TAG
)
if(NOT hg_tag)
set(hg_tag "tip")
endif()
if("${HG_VERSION_STRING}" STREQUAL "2.1")
set(notesAnchor
"#A2.1.1:_revert_pull_return_code_change.2C_compile_issue_on_OS_X"
)
message(WARNING
"Mercurial 2.1 does not distinguish an empty pull from a failed pull:
http://mercurial.selenic.com/wiki/UpgradeNotes${notesAnchor}
http://thread.gmane.org/gmane.comp.version-control.mercurial.devel/47656
Update to Mercurial >= 2.1.1.
")
endif()
set(cmd
${HG_EXECUTABLE} pull
COMMAND ${HG_EXECUTABLE} update ${hg_tag}
)
set(cmd_disconnected ${HG_EXECUTABLE} update ${hg_tag})
set(always 1)
endif()
# We use configure_file() to write the update_info_file so that the file's
# timestamp is not updated if we don't change the contents
if(NOT DEFINED cmd_disconnected)
set(cmd_disconnected "${cmd}")
endif()
set(update_info_file ${stamp_dir}/${name}-update-info.txt)
list(APPEND file_deps ${update_info_file})
configure_file(
"${CMAKE_CURRENT_FUNCTION_LIST_DIR}/ExternalProject/UpdateInfo.txt.in"
"${update_info_file}"
@ONLY
)
get_property(log
TARGET ${name}
PROPERTY _EP_LOG_UPDATE
)
if(log)
set(log LOG 1)
else()
set(log "")
endif()
get_property(uses_terminal
TARGET ${name}
PROPERTY _EP_USES_TERMINAL_UPDATE
)
if(uses_terminal)
set(uses_terminal USES_TERMINAL 1)
else()
set(uses_terminal "")
endif()
set(__cmdQuoted)
foreach(__item IN LISTS cmd)
string(APPEND __cmdQuoted " [==[${__item}]==]")
endforeach()
cmake_language(EVAL CODE "
ExternalProject_Add_Step(${name} update
INDEPENDENT TRUE
COMMENT \${comment}
COMMAND ${__cmdQuoted}
ALWAYS \${always}
EXCLUDE_FROM_MAIN \${update_disconnected}
WORKING_DIRECTORY \${work_dir}
DEPENDEES download
DEPENDS \${file_deps}
${log}
${uses_terminal}
)"
)
if(update_disconnected)
if(NOT DEFINED comment_disconnected)
set(comment_disconnected "${comment}")
endif()
set(__cmdQuoted)
foreach(__item IN LISTS cmd_disconnected)
string(APPEND __cmdQuoted " [==[${__item}]==]")
endforeach()
cmake_language(EVAL CODE "
ExternalProject_Add_Step(${name} update_disconnected
INDEPENDENT TRUE
COMMENT \${comment_disconnected}
COMMAND ${__cmdQuoted}
WORKING_DIRECTORY \${work_dir}
DEPENDEES download
DEPENDS \${file_deps}
${log}
${uses_terminal}
)"
)
endif()
endfunction()
function(_ep_add_patch_command name)
ExternalProject_Get_Property(${name} source_dir stamp_dir)
get_property(cmd_set TARGET ${name} PROPERTY _EP_PATCH_COMMAND SET)
get_property(cmd TARGET ${name} PROPERTY _EP_PATCH_COMMAND)
set(work_dir)
if(cmd_set)
set(work_dir ${source_dir})
endif()
# We use configure_file() to write the patch_info_file so that the file's
# timestamp is not updated if we don't change the contents
set(patch_info_file ${stamp_dir}/${name}-patch-info.txt)
configure_file(
"${CMAKE_CURRENT_FUNCTION_LIST_DIR}/ExternalProject/PatchInfo.txt.in"
"${patch_info_file}"
@ONLY
)
get_property(log
TARGET ${name}
PROPERTY _EP_LOG_PATCH
)
if(log)
set(log LOG 1)
else()
set(log "")
endif()
get_property(uses_terminal
TARGET ${name}
PROPERTY _EP_USES_TERMINAL_PATCH
)
if(uses_terminal)
set(uses_terminal USES_TERMINAL 1)
else()
set(uses_terminal "")
endif()
_ep_get_update_disconnected(update_disconnected ${name})
set(__cmdQuoted)
foreach(__item IN LISTS cmd)
string(APPEND __cmdQuoted " [==[${__item}]==]")
endforeach()
cmake_language(EVAL CODE "
ExternalProject_Add_Step(${name} patch
INDEPENDENT TRUE
COMMAND ${__cmdQuoted}
WORKING_DIRECTORY \${work_dir}
EXCLUDE_FROM_MAIN \${update_disconnected}
DEPENDEES update
DEPENDS \${patch_info_file}
${log}
${uses_terminal}
)"
)
if(update_disconnected)
cmake_language(EVAL CODE "
ExternalProject_Add_Step(${name} patch_disconnected
INDEPENDENT TRUE
COMMAND ${__cmdQuoted}
WORKING_DIRECTORY \${work_dir}
DEPENDEES update_disconnected
DEPENDS \${patch_info_file}
${log}
${uses_terminal}
)"
)
endif()
endfunction()
function(_ep_get_file_deps var name)
set(file_deps)
get_property(deps
TARGET ${name}
PROPERTY _EP_DEPENDS
)
foreach(dep IN LISTS deps)
get_property(dep_type
TARGET ${dep}
PROPERTY TYPE
)
if(dep_type STREQUAL "UTILITY")
get_property(is_ep
TARGET ${dep}
PROPERTY _EP_IS_EXTERNAL_PROJECT
)
if(is_ep)
_ep_get_step_stampfile(${dep} "done" done_stamp_file)
list(APPEND file_deps ${done_stamp_file})
endif()
endif()
endforeach()
set("${var}" "${file_deps}" PARENT_SCOPE)
endfunction()
function(_ep_extract_configure_command var name)
get_property(cmd_set
TARGET ${name}
PROPERTY _EP_CONFIGURE_COMMAND
SET
)
if(cmd_set)
get_property(cmd
TARGET ${name}
PROPERTY _EP_CONFIGURE_COMMAND
)
else()
get_target_property(cmake_command ${name} _EP_CMAKE_COMMAND)
if(cmake_command)
set(cmd "${cmake_command}")
else()
set(cmd "${CMAKE_COMMAND}")
endif()
get_property(cmake_args
TARGET ${name}
PROPERTY _EP_CMAKE_ARGS
)
list(APPEND cmd ${cmake_args})
# If there are any CMAKE_CACHE_ARGS or CMAKE_CACHE_DEFAULT_ARGS,
# write an initial cache and use it
get_property(cmake_cache_args
TARGET ${name}
PROPERTY _EP_CMAKE_CACHE_ARGS
)
get_property(cmake_cache_default_args
TARGET ${name}
PROPERTY _EP_CMAKE_CACHE_DEFAULT_ARGS
)
set(has_cmake_cache_args 0)
if(NOT "${cmake_cache_args}" STREQUAL "")
set(has_cmake_cache_args 1)
endif()
set(has_cmake_cache_default_args 0)
if(NOT "${cmake_cache_default_args}" STREQUAL "")
set(has_cmake_cache_default_args 1)
endif()
get_target_property(cmake_generator ${name}
_EP_CMAKE_GENERATOR
)
get_target_property(cmake_generator_instance ${name}
_EP_CMAKE_GENERATOR_INSTANCE
)
get_target_property(cmake_generator_platform ${name}
_EP_CMAKE_GENERATOR_PLATFORM
)
get_target_property(cmake_generator_toolset ${name}
_EP_CMAKE_GENERATOR_TOOLSET
)
if(cmake_generator)
list(APPEND cmd "-G${cmake_generator}")
if(cmake_generator_platform)
list(APPEND cmd "-A${cmake_generator_platform}")
endif()
if(cmake_generator_toolset)
list(APPEND cmd "-T${cmake_generator_toolset}")
endif()
if(cmake_generator_instance)
list(APPEND cmd
"-DCMAKE_GENERATOR_INSTANCE:INTERNAL=${cmake_generator_instance}"
)
endif()
else()
if(CMAKE_EXTRA_GENERATOR)
list(APPEND cmd "-G${CMAKE_EXTRA_GENERATOR} - ${CMAKE_GENERATOR}")
else()
list(APPEND cmd "-G${CMAKE_GENERATOR}")
if("${CMAKE_GENERATOR}" MATCHES "Green Hills MULTI")
set(has_cmake_cache_default_args 1)
list(APPEND cmake_cache_default_args
"-DGHS_TARGET_PLATFORM:STRING=${GHS_TARGET_PLATFORM}"
"-DGHS_PRIMARY_TARGET:STRING=${GHS_PRIMARY_TARGET}"
"-DGHS_TOOLSET_ROOT:STRING=${GHS_TOOLSET_ROOT}"
"-DGHS_OS_ROOT:STRING=${GHS_OS_ROOT}"
"-DGHS_OS_DIR:STRING=${GHS_OS_DIR}"
"-DGHS_BSP_NAME:STRING=${GHS_BSP_NAME}"
)
endif()
endif()
if(cmake_generator_platform)
message(FATAL_ERROR
"Option CMAKE_GENERATOR_PLATFORM not allowed without "
"CMAKE_GENERATOR."
)
endif()
if(CMAKE_GENERATOR_PLATFORM)
list(APPEND cmd "-A${CMAKE_GENERATOR_PLATFORM}")
endif()
if(cmake_generator_toolset)
message(FATAL_ERROR
"Option CMAKE_GENERATOR_TOOLSET not allowed without CMAKE_GENERATOR."
)
endif()
if(CMAKE_GENERATOR_TOOLSET)
list(APPEND cmd "-T${CMAKE_GENERATOR_TOOLSET}")
endif()
if(cmake_generator_instance)
message(FATAL_ERROR
"Option CMAKE_GENERATOR_INSTANCE not allowed without CMAKE_GENERATOR."
)
endif()
if(CMAKE_GENERATOR_INSTANCE)
list(APPEND cmd
"-DCMAKE_GENERATOR_INSTANCE:INTERNAL=${CMAKE_GENERATOR_INSTANCE}"
)
endif()
endif()
if(has_cmake_cache_args OR has_cmake_cache_default_args)
set(_ep_cache_args_script "<TMP_DIR>/${name}-cache-$<CONFIG>.cmake")
if(has_cmake_cache_args)
_ep_command_line_to_initial_cache(
script_initial_cache_force
"${cmake_cache_args}"
1
)
endif()
if(has_cmake_cache_default_args)
_ep_command_line_to_initial_cache(
script_initial_cache_default
"${cmake_cache_default_args}"
0
)
endif()
_ep_write_initial_cache(
${name}
"${_ep_cache_args_script}"
"${script_initial_cache_force}${script_initial_cache_default}"
)
list(APPEND cmd "-C${_ep_cache_args_script}")
_ep_replace_location_tags(${name} _ep_cache_args_script)
set(_ep_cache_args_script
"${_ep_cache_args_script}"
PARENT_SCOPE
)
endif()
list(APPEND cmd -S "<SOURCE_DIR><SOURCE_SUBDIR>" -B "<BINARY_DIR>")
endif()
set("${var}" "${cmd}" PARENT_SCOPE)
endfunction()
# TODO: Make sure external projects use the proper compiler
function(_ep_add_configure_command name)
ExternalProject_Get_Property(${name} binary_dir tmp_dir)
set(file_deps)
get_property(configure_handled_by_build
TARGET ${name}
PROPERTY _EP_CONFIGURE_HANDLED_BY_BUILD
)
if(NOT configure_handled_by_build)
# Depend on other external projects (file-level)
_ep_get_file_deps(file_deps ${name})
endif()
_ep_extract_configure_command(cmd ${name})
# If anything about the configure command changes, (command itself, cmake
# used, cmake args or cmake generator) then re-run the configure step.
# Fixes issue https://gitlab.kitware.com/cmake/cmake/-/issues/10258
#
configure_file(
${CMAKE_CURRENT_FUNCTION_LIST_DIR}/ExternalProject/cfgcmd.txt.in
${tmp_dir}/${name}-cfgcmd.txt
@ONLY
)
list(APPEND file_deps ${tmp_dir}/${name}-cfgcmd.txt)
list(APPEND file_deps ${_ep_cache_args_script})
_ep_get_update_disconnected(update_disconnected ${name})
if(update_disconnected)
set(dependees patch_disconnected)
else()
set(dependees patch)
endif()
get_property(log
TARGET ${name}
PROPERTY _EP_LOG_CONFIGURE
)
if(log)
set(log LOG 1)
else()
set(log "")
endif()
get_property(uses_terminal
TARGET ${name}
PROPERTY _EP_USES_TERMINAL_CONFIGURE
)
if(uses_terminal)
set(uses_terminal USES_TERMINAL 1)
else()
set(uses_terminal "")
endif()
set(__cmdQuoted)
foreach(__item IN LISTS cmd)
string(APPEND __cmdQuoted " [==[${__item}]==]")
endforeach()
cmake_language(EVAL CODE "
ExternalProject_Add_Step(${name} configure
INDEPENDENT FALSE
COMMAND ${__cmdQuoted}
WORKING_DIRECTORY \${binary_dir}
DEPENDEES \${dependees}
DEPENDS \${file_deps}
${log}
${uses_terminal}
)"
)
endfunction()
function(_ep_add_build_command name)
ExternalProject_Get_Property(${name} binary_dir)
set(file_deps)
get_property(configure_handled_by_build
TARGET ${name}
PROPERTY _EP_CONFIGURE_HANDLED_BY_BUILD
)
if(configure_handled_by_build)
# Depend on other external projects (file-level)
_ep_get_file_deps(file_deps ${name})
endif()
get_property(cmd_set
TARGET ${name}
PROPERTY _EP_BUILD_COMMAND
SET
)
if(cmd_set)
get_property(cmd
TARGET ${name}
PROPERTY _EP_BUILD_COMMAND
)
else()
_ep_get_build_command(${name} BUILD cmd)
endif()
get_property(log
TARGET ${name}
PROPERTY _EP_LOG_BUILD
)
if(log)
set(log LOG 1)
else()
set(log "")
endif()
get_property(uses_terminal
TARGET ${name}
PROPERTY _EP_USES_TERMINAL_BUILD
)
if(uses_terminal)
set(uses_terminal USES_TERMINAL 1)
else()
set(uses_terminal "")
endif()
get_property(build_always
TARGET ${name}
PROPERTY _EP_BUILD_ALWAYS
)
if(build_always)
set(always 1)
else()
set(always 0)
endif()
get_property(build_byproducts
TARGET ${name}
PROPERTY _EP_BUILD_BYPRODUCTS
)
get_property(build_job_server_aware
TARGET ${name}
PROPERTY _EP_BUILD_JOB_SERVER_AWARE
)
if(build_job_server_aware)
set(maybe_JOB_SERVER_AWARE "JOB_SERVER_AWARE 1")
else()
set(maybe_JOB_SERVER_AWARE "")
endif()
set(__cmdQuoted)
foreach(__item IN LISTS cmd)
string(APPEND __cmdQuoted " [==[${__item}]==]")
endforeach()
cmake_language(EVAL CODE "
ExternalProject_Add_Step(${name} build
INDEPENDENT FALSE
COMMAND ${__cmdQuoted}
BYPRODUCTS \${build_byproducts}
WORKING_DIRECTORY \${binary_dir}
DEPENDEES configure
DEPENDS \${file_deps}
ALWAYS \${always}
${maybe_JOB_SERVER_AWARE}
${log}
${uses_terminal}
)"
)
endfunction()
function(_ep_add_install_command name)
ExternalProject_Get_Property(${name} binary_dir)
get_property(cmd_set
TARGET ${name}
PROPERTY _EP_INSTALL_COMMAND
SET
)
if(cmd_set)
get_property(cmd
TARGET ${name}
PROPERTY _EP_INSTALL_COMMAND
)
else()
_ep_get_build_command(${name} INSTALL cmd)
endif()
get_property(log
TARGET ${name}
PROPERTY _EP_LOG_INSTALL
)
if(log)
set(log LOG 1)
else()
set(log "")
endif()
get_property(uses_terminal
TARGET ${name}
PROPERTY _EP_USES_TERMINAL_INSTALL
)
if(uses_terminal)
set(uses_terminal USES_TERMINAL 1)
else()
set(uses_terminal "")
endif()
# With BUILD_ALWAYS+BUILD_BYPRODUCTS, Ninja restats the
# build step outputs and may not consider this step to
# be out-of-date. Explicitly mark it out-of-date too.
get_property(build_always
TARGET ${name}
PROPERTY _EP_BUILD_ALWAYS
)
if(build_always)
set(always 1)
else()
set(always 0)
endif()
get_property(install_byproducts
TARGET ${name}
PROPERTY _EP_INSTALL_BYPRODUCTS
)
set(__cmdQuoted)
foreach(__item IN LISTS cmd)
string(APPEND __cmdQuoted " [==[${__item}]==]")
endforeach()
cmake_language(EVAL CODE "
ExternalProject_Add_Step(${name} install
INDEPENDENT FALSE
COMMAND ${__cmdQuoted}
BYPRODUCTS \${install_byproducts}
WORKING_DIRECTORY \${binary_dir}
DEPENDEES build
ALWAYS \${always}
${log}
${uses_terminal}
)"
)
endfunction()
function(_ep_add_test_command name)
ExternalProject_Get_Property(${name} binary_dir)
get_property(before TARGET ${name} PROPERTY _EP_TEST_BEFORE_INSTALL)
get_property(after TARGET ${name} PROPERTY _EP_TEST_AFTER_INSTALL)
get_property(exclude TARGET ${name} PROPERTY _EP_TEST_EXCLUDE_FROM_MAIN)
get_property(cmd_set TARGET ${name} PROPERTY _EP_TEST_COMMAND SET)
# Only actually add the test step if one of the test related properties is
# explicitly set. (i.e. the test step is omitted unless requested...)
#
if(cmd_set OR before OR after OR exclude)
if(cmd_set)
get_property(cmd
TARGET ${name}
PROPERTY _EP_TEST_COMMAND
)
else()
_ep_get_build_command(${name} TEST cmd)
endif()
if(before)
set(dependees_args DEPENDEES build)
else()
set(dependees_args DEPENDEES install)
endif()
if(exclude)
set(dependers_args "")
set(exclude_args EXCLUDE_FROM_MAIN 1)
else()
if(before)
set(dependers_args DEPENDERS install)
else()
set(dependers_args "")
endif()
set(exclude_args "")
endif()
get_property(log
TARGET ${name}
PROPERTY _EP_LOG_TEST
)
if(log)
set(log LOG 1)
else()
set(log "")
endif()
get_property(uses_terminal
TARGET ${name}
PROPERTY _EP_USES_TERMINAL_TEST
)
if(uses_terminal)
set(uses_terminal USES_TERMINAL 1)
else()
set(uses_terminal "")
endif()
set(__cmdQuoted)
foreach(__item IN LISTS cmd)
string(APPEND __cmdQuoted " [==[${__item}]==]")
endforeach()
cmake_language(EVAL CODE "
ExternalProject_Add_Step(${name} test
INDEPENDENT FALSE
COMMAND ${__cmdQuoted}
WORKING_DIRECTORY \${binary_dir}
${dependees_args}
${dependers_args}
${exclude_args}
${log}
${uses_terminal}
)"
)
endif()
endfunction()
function(ExternalProject_Add name)
cmake_policy(GET CMP0097 _EP_CMP0097
PARENT_SCOPE # undocumented, do not use outside of CMake
)
cmake_policy(GET CMP0114 cmp0114
PARENT_SCOPE # undocumented, do not use outside of CMake
)
if(CMAKE_XCODE_BUILD_SYSTEM VERSION_GREATER_EQUAL 12 AND
NOT cmp0114 STREQUAL "NEW")
message(AUTHOR_WARNING
"Policy CMP0114 is not set to NEW. "
"In order to support the Xcode \"new build system\", "
"this project must be updated to set policy CMP0114 to NEW."
"\n"
"Since CMake is generating for the Xcode \"new build system\", "
"ExternalProject_Add will use policy CMP0114's NEW behavior anyway, "
"but the generated build system may not match what the project intends."
)
set(cmp0114 "NEW")
endif()
cmake_policy(GET CMP0135 _EP_CMP0135
PARENT_SCOPE # undocumented, do not use outside of CMake
)
_ep_get_configuration_subdir_genex(cfgdir)
# Add a custom target for the external project.
set(cmf_dir ${CMAKE_CURRENT_BINARY_DIR}/CMakeFiles)
_ep_get_complete_stampfile(${name} complete_stamp_file)
cmake_policy(PUSH)
if(cmp0114 STREQUAL "NEW")
# To implement CMP0114 NEW behavior with Makefile generators,
# we need CMP0113 NEW behavior.
cmake_policy(SET CMP0113 NEW)
endif()
# The "ALL" option to add_custom_target just tells it to not set the
# EXCLUDE_FROM_ALL target property. Later, if the EXCLUDE_FROM_ALL
# argument was passed, we explicitly set it for the target.
add_custom_target(${name} ALL DEPENDS ${complete_stamp_file})
cmake_policy(POP)
set_target_properties(${name} PROPERTIES
_EP_IS_EXTERNAL_PROJECT 1
LABELS ${name}
FOLDER "ExternalProjectTargets/${name}"
_EP_CMP0114 "${cmp0114}"
)
set(keywords
#
# Directory options
#
PREFIX
TMP_DIR
STAMP_DIR
LOG_DIR
DOWNLOAD_DIR
SOURCE_DIR
BINARY_DIR
INSTALL_DIR
#
# Download step options
#
DOWNLOAD_COMMAND
#
URL
URL_HASH
URL_MD5
DOWNLOAD_NAME
DOWNLOAD_EXTRACT_TIMESTAMP
DOWNLOAD_NO_EXTRACT
DOWNLOAD_NO_PROGRESS
TIMEOUT
INACTIVITY_TIMEOUT
HTTP_USERNAME
HTTP_PASSWORD
HTTP_HEADER
TLS_VERIFY # Also used for git clone operations
TLS_CAINFO
NETRC
NETRC_FILE
#
GIT_REPOSITORY
GIT_TAG
GIT_REMOTE_NAME
GIT_SUBMODULES
GIT_SUBMODULES_RECURSE
GIT_SHALLOW
GIT_PROGRESS
GIT_CONFIG
GIT_REMOTE_UPDATE_STRATEGY
#
SVN_REPOSITORY
SVN_REVISION
SVN_USERNAME
SVN_PASSWORD
SVN_TRUST_CERT
#
HG_REPOSITORY
HG_TAG
#
CVS_REPOSITORY
CVS_MODULE
CVS_TAG
#
# Update step options
#
UPDATE_COMMAND
UPDATE_DISCONNECTED
#
# Patch step options
#
PATCH_COMMAND
#
# Configure step options
#
CONFIGURE_COMMAND
CMAKE_COMMAND
CMAKE_GENERATOR
CMAKE_GENERATOR_PLATFORM
CMAKE_GENERATOR_TOOLSET
CMAKE_GENERATOR_INSTANCE
CMAKE_ARGS
CMAKE_CACHE_ARGS
CMAKE_CACHE_DEFAULT_ARGS
SOURCE_SUBDIR
CONFIGURE_HANDLED_BY_BUILD
#
# Build step options
#
BUILD_COMMAND
BUILD_IN_SOURCE
BUILD_ALWAYS
BUILD_BYPRODUCTS
BUILD_JOB_SERVER_AWARE
#
# Install step options
#
INSTALL_COMMAND
INSTALL_BYPRODUCTS
#
# Test step options
#
TEST_COMMAND
TEST_BEFORE_INSTALL
TEST_AFTER_INSTALL
TEST_EXCLUDE_FROM_MAIN
#
# Logging options
#
LOG_DOWNLOAD
LOG_UPDATE
LOG_PATCH
LOG_CONFIGURE
LOG_BUILD
LOG_INSTALL
LOG_TEST
LOG_MERGED_STDOUTERR
LOG_OUTPUT_ON_FAILURE
#
# Terminal access options
#
USES_TERMINAL_DOWNLOAD
USES_TERMINAL_UPDATE
USES_TERMINAL_PATCH
USES_TERMINAL_CONFIGURE
USES_TERMINAL_BUILD
USES_TERMINAL_INSTALL
USES_TERMINAL_TEST
#
# Target options
#
DEPENDS
EXCLUDE_FROM_ALL
STEP_TARGETS
INDEPENDENT_STEP_TARGETS
#
# Miscellaneous options
#
LIST_SEPARATOR
#
# Internal options (undocumented)
#
EXTERNALPROJECT_INTERNAL_ARGUMENT_SEPARATOR
)
_ep_parse_arguments(
ExternalProject_Add
"${keywords}"
${name}
_EP_
"${ARGN}"
)
_ep_set_directories(${name})
_ep_get_step_stampfile(${name} "done" done_stamp_file)
_ep_get_step_stampfile(${name} "install" install_stamp_file)
# Set the EXCLUDE_FROM_ALL target property if required.
get_property(exclude_from_all
TARGET ${name}
PROPERTY _EP_EXCLUDE_FROM_ALL
)
if(exclude_from_all)
set_property(TARGET ${name} PROPERTY EXCLUDE_FROM_ALL TRUE)
endif()
get_property(repo TARGET ${name} PROPERTY _EP_GIT_REPOSITORY)
if(NOT repo STREQUAL "")
cmake_policy(GET CMP0150 cmp0150
PARENT_SCOPE # undocumented, do not use outside of CMake
)
get_property(source_dir TARGET ${name} PROPERTY _EP_SOURCE_DIR)
get_filename_component(work_dir "${source_dir}" PATH)
_ep_resolve_git_remote(resolved_git_repository "${repo}" "${cmp0150}" "${work_dir}")
set_property(TARGET ${name} PROPERTY _EP_GIT_REPOSITORY ${resolved_git_repository})
endif()
# The 'complete' step depends on all other steps and creates a
# 'done' mark. A dependent external project's 'configure' step
# depends on the 'done' mark so that it rebuilds when this project
# rebuilds. It is important that 'done' is not the output of any
# custom command so that CMake does not propagate build rules to
# other external project targets, which may cause problems during
# parallel builds. However, the Ninja generator needs to see the entire
# dependency graph, and can cope with custom commands belonging to
# multiple targets, so we add the 'done' mark as an output for Ninja only.
set(complete_outputs ${complete_stamp_file})
if(${CMAKE_GENERATOR} MATCHES "Ninja")
set(complete_outputs ${complete_outputs} ${done_stamp_file})
endif()
add_custom_command(
OUTPUT ${complete_outputs}
COMMENT "Completed '${name}'"
COMMAND ${CMAKE_COMMAND} -E make_directory ${cmf_dir}${cfgdir}
COMMAND ${CMAKE_COMMAND} -E touch ${complete_stamp_file}
COMMAND ${CMAKE_COMMAND} -E touch ${done_stamp_file}
DEPENDS ${install_stamp_file}
VERBATIM
)
# Depend on other external projects (target-level).
get_property(deps
TARGET ${name}
PROPERTY _EP_DEPENDS
)
foreach(arg IN LISTS deps)
add_dependencies(${name} ${arg})
endforeach()
# Set up custom build steps based on the target properties.
# Each step depends on the previous one.
#
# The target depends on the output of the final step.
# (Already set up above in the DEPENDS of the add_custom_target command.)
#
_ep_add_mkdir_command(${name})
_ep_add_download_command(${name})
_ep_add_update_command(${name})
_ep_add_patch_command(${name})
_ep_add_configure_command(${name})
_ep_add_build_command(${name})
_ep_add_install_command(${name})
# Test is special in that it might depend on build, or it might depend
# on install.
#
_ep_add_test_command(${name})
endfunction()
cmake_policy(POP)
![swh spinner](/static/img/swh-spinner.gif)
Computing file changes ...