Revision 4dd638f8ac6b4ed020297b5d994d9346b84f2009 authored by Mark Brown on 12 February 2016, 23:04:41 UTC, committed by Mark Brown on 12 February 2016, 23:04:41 UTC
bpf-prologue.c
/*
* bpf-prologue.c
*
* Copyright (C) 2015 He Kuang <hekuang@huawei.com>
* Copyright (C) 2015 Wang Nan <wangnan0@huawei.com>
* Copyright (C) 2015 Huawei Inc.
*/
#include <bpf/libbpf.h>
#include "perf.h"
#include "debug.h"
#include "bpf-loader.h"
#include "bpf-prologue.h"
#include "probe-finder.h"
#include <dwarf-regs.h>
#include <linux/filter.h>
#define BPF_REG_SIZE 8
#define JMP_TO_ERROR_CODE -1
#define JMP_TO_SUCCESS_CODE -2
#define JMP_TO_USER_CODE -3
struct bpf_insn_pos {
struct bpf_insn *begin;
struct bpf_insn *end;
struct bpf_insn *pos;
};
static inline int
pos_get_cnt(struct bpf_insn_pos *pos)
{
return pos->pos - pos->begin;
}
static int
append_insn(struct bpf_insn new_insn, struct bpf_insn_pos *pos)
{
if (!pos->pos)
return -BPF_LOADER_ERRNO__PROLOGUE2BIG;
if (pos->pos + 1 >= pos->end) {
pr_err("bpf prologue: prologue too long\n");
pos->pos = NULL;
return -BPF_LOADER_ERRNO__PROLOGUE2BIG;
}
*(pos->pos)++ = new_insn;
return 0;
}
static int
check_pos(struct bpf_insn_pos *pos)
{
if (!pos->pos || pos->pos >= pos->end)
return -BPF_LOADER_ERRNO__PROLOGUE2BIG;
return 0;
}
/* Give it a shorter name */
#define ins(i, p) append_insn((i), (p))
/*
* Give a register name (in 'reg'), generate instruction to
* load register into an eBPF register rd:
* 'ldd target_reg, offset(ctx_reg)', where:
* ctx_reg is pre initialized to pointer of 'struct pt_regs'.
*/
static int
gen_ldx_reg_from_ctx(struct bpf_insn_pos *pos, int ctx_reg,
const char *reg, int target_reg)
{
int offset = regs_query_register_offset(reg);
if (offset < 0) {
pr_err("bpf: prologue: failed to get register %s\n",
reg);
return offset;
}
ins(BPF_LDX_MEM(BPF_DW, target_reg, ctx_reg, offset), pos);
return check_pos(pos);
}
/*
* Generate a BPF_FUNC_probe_read function call.
*
* src_base_addr_reg is a register holding base address,
* dst_addr_reg is a register holding dest address (on stack),
* result is:
*
* *[dst_addr_reg] = *([src_base_addr_reg] + offset)
*
* Arguments of BPF_FUNC_probe_read:
* ARG1: ptr to stack (dest)
* ARG2: size (8)
* ARG3: unsafe ptr (src)
*/
static int
gen_read_mem(struct bpf_insn_pos *pos,
int src_base_addr_reg,
int dst_addr_reg,
long offset)
{
/* mov arg3, src_base_addr_reg */
if (src_base_addr_reg != BPF_REG_ARG3)
ins(BPF_MOV64_REG(BPF_REG_ARG3, src_base_addr_reg), pos);
/* add arg3, #offset */
if (offset)
ins(BPF_ALU64_IMM(BPF_ADD, BPF_REG_ARG3, offset), pos);
/* mov arg2, #reg_size */
ins(BPF_ALU64_IMM(BPF_MOV, BPF_REG_ARG2, BPF_REG_SIZE), pos);
/* mov arg1, dst_addr_reg */
if (dst_addr_reg != BPF_REG_ARG1)
ins(BPF_MOV64_REG(BPF_REG_ARG1, dst_addr_reg), pos);
/* Call probe_read */
ins(BPF_EMIT_CALL(BPF_FUNC_probe_read), pos);
/*
* Error processing: if read fail, goto error code,
* will be relocated. Target should be the start of
* error processing code.
*/
ins(BPF_JMP_IMM(BPF_JNE, BPF_REG_0, 0, JMP_TO_ERROR_CODE),
pos);
return check_pos(pos);
}
/*
* Each arg should be bare register. Fetch and save them into argument
* registers (r3 - r5).
*
* BPF_REG_1 should have been initialized with pointer to
* 'struct pt_regs'.
*/
static int
gen_prologue_fastpath(struct bpf_insn_pos *pos,
struct probe_trace_arg *args, int nargs)
{
int i, err = 0;
for (i = 0; i < nargs; i++) {
err = gen_ldx_reg_from_ctx(pos, BPF_REG_1, args[i].value,
BPF_PROLOGUE_START_ARG_REG + i);
if (err)
goto errout;
}
return check_pos(pos);
errout:
return err;
}
/*
* Slow path:
* At least one argument has the form of 'offset($rx)'.
*
* Following code first stores them into stack, then loads all of then
* to r2 - r5.
* Before final loading, the final result should be:
*
* low address
* BPF_REG_FP - 24 ARG3
* BPF_REG_FP - 16 ARG2
* BPF_REG_FP - 8 ARG1
* BPF_REG_FP
* high address
*
* For each argument (described as: offn(...off2(off1(reg)))),
* generates following code:
*
* r7 <- fp
* r7 <- r7 - stack_offset // Ideal code should initialize r7 using
* // fp before generating args. However,
* // eBPF won't regard r7 as stack pointer
* // if it is generated by minus 8 from
* // another stack pointer except fp.
* // This is why we have to set r7
* // to fp for each variable.
* r3 <- value of 'reg'-> generated using gen_ldx_reg_from_ctx()
* (r7) <- r3 // skip following instructions for bare reg
* r3 <- r3 + off1 . // skip if off1 == 0
* r2 <- 8 \
* r1 <- r7 |-> generated by gen_read_mem()
* call probe_read /
* jnei r0, 0, err ./
* r3 <- (r7)
* r3 <- r3 + off2 . // skip if off2 == 0
* r2 <- 8 \ // r2 may be broken by probe_read, so set again
* r1 <- r7 |-> generated by gen_read_mem()
* call probe_read /
* jnei r0, 0, err ./
* ...
*/
static int
gen_prologue_slowpath(struct bpf_insn_pos *pos,
struct probe_trace_arg *args, int nargs)
{
int err, i;
for (i = 0; i < nargs; i++) {
struct probe_trace_arg *arg = &args[i];
const char *reg = arg->value;
struct probe_trace_arg_ref *ref = NULL;
int stack_offset = (i + 1) * -8;
pr_debug("prologue: fetch arg %d, base reg is %s\n",
i, reg);
/* value of base register is stored into ARG3 */
err = gen_ldx_reg_from_ctx(pos, BPF_REG_CTX, reg,
BPF_REG_ARG3);
if (err) {
pr_err("prologue: failed to get offset of register %s\n",
reg);
goto errout;
}
/* Make r7 the stack pointer. */
ins(BPF_MOV64_REG(BPF_REG_7, BPF_REG_FP), pos);
/* r7 += -8 */
ins(BPF_ALU64_IMM(BPF_ADD, BPF_REG_7, stack_offset), pos);
/*
* Store r3 (base register) onto stack
* Ensure fp[offset] is set.
* fp is the only valid base register when storing
* into stack. We are not allowed to use r7 as base
* register here.
*/
ins(BPF_STX_MEM(BPF_DW, BPF_REG_FP, BPF_REG_ARG3,
stack_offset), pos);
ref = arg->ref;
while (ref) {
pr_debug("prologue: arg %d: offset %ld\n",
i, ref->offset);
err = gen_read_mem(pos, BPF_REG_3, BPF_REG_7,
ref->offset);
if (err) {
pr_err("prologue: failed to generate probe_read function call\n");
goto errout;
}
ref = ref->next;
/*
* Load previous result into ARG3. Use
* BPF_REG_FP instead of r7 because verifier
* allows FP based addressing only.
*/
if (ref)
ins(BPF_LDX_MEM(BPF_DW, BPF_REG_ARG3,
BPF_REG_FP, stack_offset), pos);
}
}
/* Final pass: read to registers */
for (i = 0; i < nargs; i++)
ins(BPF_LDX_MEM(BPF_DW, BPF_PROLOGUE_START_ARG_REG + i,
BPF_REG_FP, -BPF_REG_SIZE * (i + 1)), pos);
ins(BPF_JMP_IMM(BPF_JA, BPF_REG_0, 0, JMP_TO_SUCCESS_CODE), pos);
return check_pos(pos);
errout:
return err;
}
static int
prologue_relocate(struct bpf_insn_pos *pos, struct bpf_insn *error_code,
struct bpf_insn *success_code, struct bpf_insn *user_code)
{
struct bpf_insn *insn;
if (check_pos(pos))
return -BPF_LOADER_ERRNO__PROLOGUE2BIG;
for (insn = pos->begin; insn < pos->pos; insn++) {
struct bpf_insn *target;
u8 class = BPF_CLASS(insn->code);
u8 opcode;
if (class != BPF_JMP)
continue;
opcode = BPF_OP(insn->code);
if (opcode == BPF_CALL)
continue;
switch (insn->off) {
case JMP_TO_ERROR_CODE:
target = error_code;
break;
case JMP_TO_SUCCESS_CODE:
target = success_code;
break;
case JMP_TO_USER_CODE:
target = user_code;
break;
default:
pr_err("bpf prologue: internal error: relocation failed\n");
return -BPF_LOADER_ERRNO__PROLOGUE;
}
insn->off = target - (insn + 1);
}
return 0;
}
int bpf__gen_prologue(struct probe_trace_arg *args, int nargs,
struct bpf_insn *new_prog, size_t *new_cnt,
size_t cnt_space)
{
struct bpf_insn *success_code = NULL;
struct bpf_insn *error_code = NULL;
struct bpf_insn *user_code = NULL;
struct bpf_insn_pos pos;
bool fastpath = true;
int err = 0, i;
if (!new_prog || !new_cnt)
return -EINVAL;
if (cnt_space > BPF_MAXINSNS)
cnt_space = BPF_MAXINSNS;
pos.begin = new_prog;
pos.end = new_prog + cnt_space;
pos.pos = new_prog;
if (!nargs) {
ins(BPF_ALU64_IMM(BPF_MOV, BPF_PROLOGUE_FETCH_RESULT_REG, 0),
&pos);
if (check_pos(&pos))
goto errout;
*new_cnt = pos_get_cnt(&pos);
return 0;
}
if (nargs > BPF_PROLOGUE_MAX_ARGS) {
pr_warning("bpf: prologue: %d arguments are dropped\n",
nargs - BPF_PROLOGUE_MAX_ARGS);
nargs = BPF_PROLOGUE_MAX_ARGS;
}
/* First pass: validation */
for (i = 0; i < nargs; i++) {
struct probe_trace_arg_ref *ref = args[i].ref;
if (args[i].value[0] == '@') {
/* TODO: fetch global variable */
pr_err("bpf: prologue: global %s%+ld not support\n",
args[i].value, ref ? ref->offset : 0);
return -ENOTSUP;
}
while (ref) {
/* fastpath is true if all args has ref == NULL */
fastpath = false;
/*
* Instruction encodes immediate value using
* s32, ref->offset is long. On systems which
* can't fill long in s32, refuse to process if
* ref->offset too large (or small).
*/
#ifdef __LP64__
#define OFFSET_MAX ((1LL << 31) - 1)
#define OFFSET_MIN ((1LL << 31) * -1)
if (ref->offset > OFFSET_MAX ||
ref->offset < OFFSET_MIN) {
pr_err("bpf: prologue: offset out of bound: %ld\n",
ref->offset);
return -BPF_LOADER_ERRNO__PROLOGUEOOB;
}
#endif
ref = ref->next;
}
}
pr_debug("prologue: pass validation\n");
if (fastpath) {
/* If all variables are registers... */
pr_debug("prologue: fast path\n");
err = gen_prologue_fastpath(&pos, args, nargs);
if (err)
goto errout;
} else {
pr_debug("prologue: slow path\n");
/* Initialization: move ctx to a callee saved register. */
ins(BPF_MOV64_REG(BPF_REG_CTX, BPF_REG_ARG1), &pos);
err = gen_prologue_slowpath(&pos, args, nargs);
if (err)
goto errout;
/*
* start of ERROR_CODE (only slow pass needs error code)
* mov r2 <- 1 // r2 is error number
* mov r3 <- 0 // r3, r4... should be touched or
* // verifier would complain
* mov r4 <- 0
* ...
* goto usercode
*/
error_code = pos.pos;
ins(BPF_ALU64_IMM(BPF_MOV, BPF_PROLOGUE_FETCH_RESULT_REG, 1),
&pos);
for (i = 0; i < nargs; i++)
ins(BPF_ALU64_IMM(BPF_MOV,
BPF_PROLOGUE_START_ARG_REG + i,
0),
&pos);
ins(BPF_JMP_IMM(BPF_JA, BPF_REG_0, 0, JMP_TO_USER_CODE),
&pos);
}
/*
* start of SUCCESS_CODE:
* mov r2 <- 0
* goto usercode // skip
*/
success_code = pos.pos;
ins(BPF_ALU64_IMM(BPF_MOV, BPF_PROLOGUE_FETCH_RESULT_REG, 0), &pos);
/*
* start of USER_CODE:
* Restore ctx to r1
*/
user_code = pos.pos;
if (!fastpath) {
/*
* Only slow path needs restoring of ctx. In fast path,
* register are loaded directly from r1.
*/
ins(BPF_MOV64_REG(BPF_REG_ARG1, BPF_REG_CTX), &pos);
err = prologue_relocate(&pos, error_code, success_code,
user_code);
if (err)
goto errout;
}
err = check_pos(&pos);
if (err)
goto errout;
*new_cnt = pos_get_cnt(&pos);
return 0;
errout:
return err;
}
![swh spinner](/static/img/swh-spinner.gif)
Computing file changes ...