Revision 4e43e64d0f1332fcc503babad4dc31aead7131ca authored by Eric Dumazet on 28 June 2022, 12:12:48 UTC, committed by Jakub Kicinski on 30 June 2022, 03:41:09 UTC
As reported by syzbot, we should not use rcu_dereference() when rcu_read_lock() is not held. WARNING: suspicious RCU usage 5.19.0-rc2-syzkaller #0 Not tainted net/ipv6/addrconf.c:5175 suspicious rcu_dereference_check() usage! other info that might help us debug this: rcu_scheduler_active = 2, debug_locks = 1 1 lock held by syz-executor326/3617: #0: ffffffff8d5848e8 (rtnl_mutex){+.+.}-{3:3}, at: netlink_dump+0xae/0xc20 net/netlink/af_netlink.c:2223 stack backtrace: CPU: 0 PID: 3617 Comm: syz-executor326 Not tainted 5.19.0-rc2-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: <TASK> __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0xcd/0x134 lib/dump_stack.c:106 in6_dump_addrs+0x12d1/0x1790 net/ipv6/addrconf.c:5175 inet6_dump_addr+0x9c1/0xb50 net/ipv6/addrconf.c:5300 netlink_dump+0x541/0xc20 net/netlink/af_netlink.c:2275 __netlink_dump_start+0x647/0x900 net/netlink/af_netlink.c:2380 netlink_dump_start include/linux/netlink.h:245 [inline] rtnetlink_rcv_msg+0x73e/0xc90 net/core/rtnetlink.c:6046 netlink_rcv_skb+0x153/0x420 net/netlink/af_netlink.c:2501 netlink_unicast_kernel net/netlink/af_netlink.c:1319 [inline] netlink_unicast+0x543/0x7f0 net/netlink/af_netlink.c:1345 netlink_sendmsg+0x917/0xe10 net/netlink/af_netlink.c:1921 sock_sendmsg_nosec net/socket.c:714 [inline] sock_sendmsg+0xcf/0x120 net/socket.c:734 ____sys_sendmsg+0x6eb/0x810 net/socket.c:2492 ___sys_sendmsg+0xf3/0x170 net/socket.c:2546 __sys_sendmsg net/socket.c:2575 [inline] __do_sys_sendmsg net/socket.c:2584 [inline] __se_sys_sendmsg net/socket.c:2582 [inline] __x64_sys_sendmsg+0x132/0x220 net/socket.c:2582 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x46/0xb0 Fixes: 88e2ca308094 ("mld: convert ifmcaddr6 to RCU") Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Taehee Yoo <ap420073@gmail.com> Link: https://lore.kernel.org/r/20220628121248.858695-1-edumazet@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
1 parent fa152f6
Makefile.package
# SPDX-License-Identifier: GPL-2.0-only
# Makefile for the different targets used to generate full packages of a kernel
include $(srctree)/scripts/Kbuild.include
# RPM target
# ---------------------------------------------------------------------------
# The rpm target generates two rpm files:
# /usr/src/packages/SRPMS/kernel-2.6.7rc2-1.src.rpm
# /usr/src/packages/RPMS/i386/kernel-2.6.7rc2-1.<arch>.rpm
# The src.rpm files includes all source for the kernel being built
# The <arch>.rpm includes kernel configuration, modules etc.
#
# Process to create the rpm files
# a) clean the kernel
# b) Generate .spec file
# c) Build a tar ball, using symlink to make kernel version
# first entry in the path
# d) and pack the result to a tar.gz file
# e) generate the rpm files, based on kernel.spec
# - Use /. to avoid tar packing just the symlink
# Note that the rpm-pkg target cannot be used with KBUILD_OUTPUT,
# but the binrpm-pkg target can; for some reason O= gets ignored.
# Remove hyphens since they have special meaning in RPM filenames
KERNELPATH := kernel-$(subst -,_,$(KERNELRELEASE))
KDEB_SOURCENAME ?= linux-upstream
KBUILD_PKG_ROOTCMD ?="fakeroot -u"
export KDEB_SOURCENAME
# Include only those top-level files that are needed by make, plus the GPL copy
TAR_CONTENT := $(KBUILD_ALLDIRS) .config .scmversion Makefile \
Kbuild Kconfig COPYING $(wildcard localversion*)
MKSPEC := $(srctree)/scripts/package/mkspec
quiet_cmd_src_tar = TAR $(2).tar.gz
cmd_src_tar = \
if test "$(objtree)" != "$(srctree)"; then \
echo >&2; \
echo >&2 " ERROR:"; \
echo >&2 " Building source tarball is not possible outside the"; \
echo >&2 " kernel source tree. Don't set KBUILD_OUTPUT, or use the"; \
echo >&2 " binrpm-pkg or bindeb-pkg target instead."; \
echo >&2; \
false; \
fi ; \
$(srctree)/scripts/setlocalversion --save-scmversion; \
tar -I $(KGZIP) -c $(RCS_TAR_IGNORE) -f $(2).tar.gz \
--transform 's:^:$(2)/:S' $(TAR_CONTENT) $(3); \
rm -f $(objtree)/.scmversion
# rpm-pkg
# ---------------------------------------------------------------------------
PHONY += rpm-pkg
rpm-pkg:
$(MAKE) clean
$(CONFIG_SHELL) $(MKSPEC) >$(objtree)/kernel.spec
$(call cmd,src_tar,$(KERNELPATH),kernel.spec)
+rpmbuild $(RPMOPTS) --target $(UTS_MACHINE) -ta $(KERNELPATH).tar.gz \
--define='_smp_mflags %{nil}'
# binrpm-pkg
# ---------------------------------------------------------------------------
PHONY += binrpm-pkg
binrpm-pkg:
$(MAKE) -f $(srctree)/Makefile
$(CONFIG_SHELL) $(MKSPEC) prebuilt > $(objtree)/binkernel.spec
+rpmbuild $(RPMOPTS) --define "_builddir $(objtree)" --target \
$(UTS_MACHINE) -bb $(objtree)/binkernel.spec
PHONY += deb-pkg
deb-pkg:
$(MAKE) clean
$(CONFIG_SHELL) $(srctree)/scripts/package/mkdebian
$(call cmd,src_tar,$(KDEB_SOURCENAME))
origversion=$$(dpkg-parsechangelog -SVersion |sed 's/-[^-]*$$//');\
mv $(KDEB_SOURCENAME).tar.gz ../$(KDEB_SOURCENAME)_$${origversion}.orig.tar.gz
+dpkg-buildpackage -r$(KBUILD_PKG_ROOTCMD) -a$$(cat debian/arch) $(DPKG_FLAGS) -i.git -us -uc
PHONY += bindeb-pkg
bindeb-pkg:
$(CONFIG_SHELL) $(srctree)/scripts/package/mkdebian
+dpkg-buildpackage -r$(KBUILD_PKG_ROOTCMD) -a$$(cat debian/arch) $(DPKG_FLAGS) -b -nc -uc
PHONY += intdeb-pkg
intdeb-pkg:
+$(CONFIG_SHELL) $(srctree)/scripts/package/builddeb
# snap-pkg
# ---------------------------------------------------------------------------
PHONY += snap-pkg
snap-pkg:
rm -rf $(objtree)/snap
mkdir $(objtree)/snap
$(MAKE) clean
$(call cmd,src_tar,$(KERNELPATH))
sed "s@KERNELRELEASE@$(KERNELRELEASE)@; \
s@SRCTREE@$(shell realpath $(KERNELPATH).tar.gz)@" \
$(srctree)/scripts/package/snapcraft.template > \
$(objtree)/snap/snapcraft.yaml
cd $(objtree)/snap && \
snapcraft --target-arch=$(UTS_MACHINE)
# tarball targets
# ---------------------------------------------------------------------------
tar-pkgs := dir-pkg tar-pkg targz-pkg tarbz2-pkg tarxz-pkg tarzst-pkg
PHONY += $(tar-pkgs)
$(tar-pkgs):
$(MAKE) -f $(srctree)/Makefile
+$(CONFIG_SHELL) $(srctree)/scripts/package/buildtar $@
# perf-pkg - generate a source tarball with perf source
# ---------------------------------------------------------------------------
perf-tar=perf-$(KERNELVERSION)
quiet_cmd_perf_tar = TAR
cmd_perf_tar = \
git --git-dir=$(srctree)/.git archive --prefix=$(perf-tar)/ \
HEAD^{tree} $$(cd $(srctree); \
echo $$(cat tools/perf/MANIFEST)) \
-o $(perf-tar).tar; \
mkdir -p $(perf-tar); \
git --git-dir=$(srctree)/.git rev-parse HEAD > $(perf-tar)/HEAD; \
(cd $(srctree)/tools/perf; \
util/PERF-VERSION-GEN $(CURDIR)/$(perf-tar)/); \
tar rf $(perf-tar).tar $(perf-tar)/HEAD $(perf-tar)/PERF-VERSION-FILE; \
rm -r $(perf-tar); \
$(if $(findstring tar-src,$@),, \
$(if $(findstring bz2,$@),$(KBZIP2), \
$(if $(findstring gz,$@),$(KGZIP), \
$(if $(findstring xz,$@),$(XZ), \
$(if $(findstring zst,$@),$(ZSTD), \
$(error unknown target $@))))) \
-f -9 $(perf-tar).tar)
perf-tar-pkgs := perf-tar-src-pkg perf-targz-src-pkg perf-tarbz2-src-pkg \
perf-tarxz-src-pkg perf-tarzst-src-pkg
PHONY += $(perf-tar-pkgs)
$(perf-tar-pkgs):
$(call cmd,perf_tar)
# Help text displayed when executing 'make help'
# ---------------------------------------------------------------------------
PHONY += help
help:
@echo ' rpm-pkg - Build both source and binary RPM kernel packages'
@echo ' binrpm-pkg - Build only the binary kernel RPM package'
@echo ' deb-pkg - Build both source and binary deb kernel packages'
@echo ' bindeb-pkg - Build only the binary kernel deb package'
@echo ' snap-pkg - Build only the binary kernel snap package'
@echo ' (will connect to external hosts)'
@echo ' dir-pkg - Build the kernel as a plain directory structure'
@echo ' tar-pkg - Build the kernel as an uncompressed tarball'
@echo ' targz-pkg - Build the kernel as a gzip compressed tarball'
@echo ' tarbz2-pkg - Build the kernel as a bzip2 compressed tarball'
@echo ' tarxz-pkg - Build the kernel as a xz compressed tarball'
@echo ' tarzst-pkg - Build the kernel as a zstd compressed tarball'
@echo ' perf-tar-src-pkg - Build $(perf-tar).tar source tarball'
@echo ' perf-targz-src-pkg - Build $(perf-tar).tar.gz source tarball'
@echo ' perf-tarbz2-src-pkg - Build $(perf-tar).tar.bz2 source tarball'
@echo ' perf-tarxz-src-pkg - Build $(perf-tar).tar.xz source tarball'
@echo ' perf-tarzst-src-pkg - Build $(perf-tar).tar.zst source tarball'
.PHONY: $(PHONY)
![swh spinner](/static/img/swh-spinner.gif)
Computing file changes ...