4e5d304 | Ron Burkey | 20 October 2018, 17:47:00 UTC | The sample Block I AGC program TRIVIUM, found at the very end of one of the recently-added documents about YUL, was transcribed. Because the original program contained a deliberate error in YUL (as well as some constructs that have unintentionally become errors in yaYUL), I've provided it in two forms: TRIVIUM (which matches the original scan, to the extent feasible) and TRIVIUM-repaired (which has the deliberate and unintentional errors fixed, but otherwise retains the identical functionality of the original). | 20 October 2018, 17:47:00 UTC |
c6c292e | Ron Burkey | 12 October 2018, 15:53:14 UTC | Changed the yaYUL switches for building Validation-hardware-simulation, to correspond to what's needed for conversion of the binary to Verilog. | 12 October 2018, 15:53:14 UTC |
49926c6 | Ron Burkey | 12 October 2018, 13:13:55 UTC | Added a cli switch (--simulation) to yaYUL. What this does is to react to comments in *.agc files that include the strings -SIMULATION or +SIMULATION. The former are automatically commented out if --simulation is used, while the latter are commented out is --simulation is *not* used. All of that was for the sole purpose of adding a -SIMULATION specifier to a single line in Validation.agc that proves inconvenient sometimes for simulations of the AGC electronics. There's a new target in the top-level Makefile (namely Validation-hardware-simulation) that isn't one of the default ones, but which when used, builds a separate rope (Validation/Validation-hardware-simulation.agc.bin) and html with that one inconvenient line in Validation.agc commented out. Overkill, I know. | 12 October 2018, 13:13:55 UTC |
0a720cd | Ron Burkey | 28 September 2018, 01:08:43 UTC | Added --backlights switch. Not sure it works properly when playback is involved. | 28 September 2018, 01:08:43 UTC |
6f6c10d | Mike Stewart | 03 August 2018, 01:47:22 UTC | Borealis: added a verb to check for the presence of a hardware bug affecting DINC on early Block 2 AGCs | 03 August 2018, 01:47:22 UTC |
5377b3c | Ron Burkey | 30 July 2018, 23:34:49 UTC | I *think* this is okay to do. | 30 July 2018, 23:34:49 UTC |
b141c5a | Ron Burkey | 13 May 2018, 11:48:56 UTC | For wxWidgets 3.0, the --half-size DSKY option was producing a window that was too short, vertically, to show all of the DSKY keypad. I wasn't able to fix this properly, but a minimum DSKY window size is now enforced that seems to work around the problem. | 13 May 2018, 11:48:56 UTC |
4abd659 | Ron Burkey | 10 March 2018, 18:34:30 UTC | Added the --gunmetal option to piDSKY2.py. | 10 March 2018, 18:34:30 UTC |
d7d58a1 | Ron Burkey | 04 March 2018, 14:57:18 UTC | Ended up completely removing VirtualAGC's attempt to use the screen size (which wasn't working anyway), and now completely rely on the command-line options to choose between three available formats for VirtuaAGC's UI: --radio-buttons, --dropdown, and --squish. The default is --dropdown, which I what I think most appropriate in the largest number of cases. | 04 March 2018, 14:57:18 UTC |
f33aa95 | Ron Burkey | 04 March 2018, 13:46:25 UTC | Added --squish and --maximize to the VirtualAGC GUI program, for running on even smaller screens (namely, 7" Raspberry Pi 800x480 touchscreen). | 04 March 2018, 13:46:25 UTC |
393f17f | Jim Lawton | 27 January 2018, 22:10:39 UTC | Add note about 1800 machine type. | 27 January 2018, 22:10:39 UTC |
ee23e0e | Jim Lawton | 27 January 2018, 22:00:20 UTC | Add clean target. | 27 January 2018, 22:00:20 UTC |
31b4d88 | Jim Lawton | 27 January 2018, 21:55:27 UTC | Ignore symtab error files. | 27 January 2018, 21:55:27 UTC |
dc9800e | Jim Lawton | 27 January 2018, 21:43:36 UTC | Fix typo on page 117. | 27 January 2018, 21:43:36 UTC |
11d38c2 | Jim Lawton | 27 January 2018, 21:32:34 UTC | Don't check YULMANUF and YULSIMUL for now. They have some strange symbols. | 27 January 2018, 21:32:34 UTC |
ce9fa46 | Jim Lawton | 27 January 2018, 20:44:54 UTC | Fix symcheck target. | 27 January 2018, 20:44:54 UTC |
abf01fc | Jim Lawton | 27 January 2018, 20:40:24 UTC | Merge remote-tracking branch 'upstream/master' | 27 January 2018, 20:40:24 UTC |
9a07e7e | Ron Burkey | 27 January 2018, 15:06:51 UTC | Tweaked the VirtualAGC makefile in ways suggested by issue #1059. | 27 January 2018, 15:06:51 UTC |
08e87bc | Jim Lawton | 15 January 2018, 21:25:26 UTC | Rename listsyms target to symtab. | 15 January 2018, 21:25:26 UTC |
afb90bb | Jim Lawton | 15 January 2018, 16:49:00 UTC | Generate global symbol table, across all segments/subsegments. | 15 January 2018, 16:49:00 UTC |
ed5635b | Jim Lawton | 12 January 2018, 19:53:23 UTC | Merge remote-tracking branch 'upstream/master' | 12 January 2018, 19:53:23 UTC |
c6ab1d1 | Jim Lawton | 12 January 2018, 19:52:52 UTC | YUL: set default make target. | 12 January 2018, 19:52:58 UTC |
3df4865 | Jim Lawton | 12 January 2018, 14:21:03 UTC | Merge remote-tracking branch 'mine/master' | 12 January 2018, 14:21:03 UTC |
9ca2a57 | Jim Lawton | 12 January 2018, 14:20:41 UTC | Update ignores: ignore files generated by builds. | 12 January 2018, 14:20:41 UTC |
3089e95 | Mike Stewart | 07 January 2018, 18:28:04 UTC | Merge pull request #1058 from virtualagc/temp Channel 163 bit for TEMP | 07 January 2018, 18:28:04 UTC |
d57942b | Mike Stewart | 06 January 2018, 18:26:00 UTC | Updated changelogs for agc_engine.c and agc_engine.h | 06 January 2018, 18:26:00 UTC |
f5fcab9 | Mike Stewart | 06 January 2018, 18:18:45 UTC | Added a channel 163 bit for the TEMP light (since the light is connected to both CH11 bit 4 and CH30 bit 15) | 06 January 2018, 18:18:45 UTC |
ead0942 | rburkey2005 | 05 January 2018, 15:59:48 UTC | Merge pull request #1057 from Thymo-/master Correct transcription errors in Colossus ropes | 05 January 2018, 15:59:48 UTC |
7dadfd5 | Thymo van Beers | 05 January 2018, 15:37:59 UTC | Fix Artemis072 spacing to conform to others | 05 January 2018, 15:37:59 UTC |
5440532 | Thymo van Beers | 05 January 2018, 15:29:10 UTC | Correct transcription error in Colossus ropes | 05 January 2018, 15:29:10 UTC |
d253a19 | Jim Lawton | 03 January 2018, 20:53:27 UTC | Fixed symbol LFINI2P definition on p.280. | 03 January 2018, 20:53:27 UTC |
5500dc8 | Jim Lawton | 03 January 2018, 20:50:39 UTC | Fixed symbol OCT7777 definition on p.274. | 03 January 2018, 20:50:39 UTC |
aacdb1a | Jim Lawton | 03 January 2018, 20:48:10 UTC | Silence echoes. | 03 January 2018, 20:48:10 UTC |
1eece29 | Jim Lawton | 03 January 2018, 20:47:38 UTC | Fixed multiply-defined symbol OLDBINQ on p.216. | 03 January 2018, 20:47:38 UTC |
7e3abe0 | Ron Burkey | 02 January 2018, 18:55:29 UTC | The humanizeScript.py program can now process NASSP logs in addition to DSKY-playback scripts, via a second CLI argument. | 02 January 2018, 18:55:29 UTC |
88b07d9 | Ron Burkey | 31 December 2017, 17:23:06 UTC | Tweaked. | 31 December 2017, 17:23:06 UTC |
8f99e16 | Ron Burkey | 31 December 2017, 16:19:05 UTC | Added shellouts for arbitrary BASH commands to the DSKY playback script format. | 31 December 2017, 16:19:05 UTC |
b5af6a7 | Ron Burkey | 30 December 2017, 16:10:24 UTC | Added a canned DSKY playback script called testLights.canned. Added it to the runPiDSKY2.sh maintenance menu. Allowed piDSKY2.py to handle comments in the canned scripts. | 30 December 2017, 16:10:24 UTC |
6ca7533 | Ron Burkey | 29 December 2017, 21:03:20 UTC | A little something to help insure PIGPIO/SPI shutdown upon exit. Shouldn't be needed, but shouldn't be harmful either. | 29 December 2017, 21:03:20 UTC |
a97c909 | Ron Burkey | 27 December 2017, 20:10:17 UTC | Tweaked auto.sh program comments a bit more. | 27 December 2017, 20:10:17 UTC |
815b1b8 | Ron Burkey | 27 December 2017, 20:08:01 UTC | Added some comments to auto.sh to explain how to use it to autostart runPiDSKY2.sh on a Raspbian system. | 27 December 2017, 20:08:01 UTC |
4f41ac2 | Ron Burkey | 27 December 2017, 14:55:29 UTC | Changed some messaging to separate out time spent by piDSKY2.py from time spent by runPiDSKY2.sh. | 27 December 2017, 14:55:29 UTC |
0d65fdc | Ron Burkey | 27 December 2017, 13:56:42 UTC | Added primitive temporary logging to playback of canned scripts, so that somebody could log in with ssh and view the logfile (playback.log on ramdisk) to see how many playbacks had been done in the current session. | 27 December 2017, 13:56:42 UTC |
0d7b45a | Ron Burkey | 27 December 2017, 13:49:44 UTC | Shaved a little off of the exit time of the canned scripts. | 27 December 2017, 13:49:44 UTC |
5ab79e2 | Ron Burkey | 27 December 2017, 13:46:49 UTC | Now delays 2 seconds before returning to mission menu, to allow messages to be seen. | 27 December 2017, 13:46:49 UTC |
36695f8 | Ron Burkey | 27 December 2017, 13:44:01 UTC | More of the same. | 27 December 2017, 13:44:01 UTC |
7ef48d4 | Ron Burkey | 27 December 2017, 11:53:44 UTC | Corrected a program comment. | 27 December 2017, 11:53:44 UTC |
ffcf6d8 | Ron Burkey | 27 December 2017, 11:49:28 UTC | Tried to fixed unavailability of SPI handles problem. | 27 December 2017, 11:49:28 UTC |
9218629 | Ron Burkey | 27 December 2017, 05:25:28 UTC | Fixed processing of RRRRR in canned scripts, hopefully. | 27 December 2017, 05:25:28 UTC |
438665c | Ron Burkey | 27 December 2017, 05:00:21 UTC | Something wrong with detecting already-running runPiDSKY2.sh. Perhaps worked around now. | 27 December 2017, 05:00:21 UTC |
5c53c32 | Ron Burkey | 27 December 2017, 04:21:38 UTC | Fixed bug in the multiple-run feature. | 27 December 2017, 04:21:38 UTC |
a3a02d1 | Ron Burkey | 27 December 2017, 04:16:19 UTC | Removed the "make clean" for the install option (leaving just a "make"). Experimental prevention of running a 2nd copy of runPiDSKY2.sh. | 27 December 2017, 04:16:19 UTC |
ff2da83 | Ron Burkey | 27 December 2017, 04:14:17 UTC | Added experimental exits after 30 seconds to the existing canned scripts. Added experimental script for auto startup. | 27 December 2017, 04:14:17 UTC |
06e4a0e | Ron Burkey | 27 December 2017, 02:01:16 UTC | Eliminated a foolish debugging message. | 27 December 2017, 02:01:16 UTC |
7c2c004 | Ron Burkey | 27 December 2017, 01:53:18 UTC | Yikes! Was using 0/1 as commands in the lamp and backlights rather than -/+. | 27 December 2017, 01:53:18 UTC |
42d783d | Ron Burkey | 26 December 2017, 23:45:52 UTC | Forgot to add COMP ACTY setting to screenshot file-naming scheme. | 26 December 2017, 23:45:52 UTC |
c26eebb | Ron Burkey | 26 December 2017, 20:03:43 UTC | Fixed a translation error. | 26 December 2017, 20:03:43 UTC |
81ad747 | Ron Burkey | 26 December 2017, 20:02:42 UTC | Fixed an internationalizatin error. | 26 December 2017, 20:02:42 UTC |
c3c634e | Ron Burkey | 26 December 2017, 19:58:28 UTC | Added reset-settings, version date on mission menu, and translations for the new messages. | 26 December 2017, 19:58:28 UTC |
96f0c10 | Ron Burkey | 26 December 2017, 19:38:29 UTC | For some reason, the return code from 'make' isn't working for me. | 26 December 2017, 19:38:29 UTC |
d11c0ef | Ron Burkey | 26 December 2017, 19:32:33 UTC | Tweaked the rebuild process. | 26 December 2017, 19:32:33 UTC |
1c63d9d | Ron Burkey | 26 December 2017, 19:29:19 UTC | Tweaked the build-from-source. | 26 December 2017, 19:29:19 UTC |
b62f037 | Ron Burkey | 26 December 2017, 19:26:28 UTC | Oops! Forgot a closing quote. | 26 December 2017, 19:26:28 UTC |
33818ae | Ron Burkey | 26 December 2017, 19:22:48 UTC | Experimental attempt to rebuild yaAGC and yaYUL during piPeripheral update. | 26 December 2017, 19:22:48 UTC |
39bfca5 | Ron Burkey | 25 December 2017, 19:46:55 UTC | In display mode 5, lat,lon are now XXX.XX rather than XXX.X. Moreover, there are two two modes, 7 and 8, in which lat,lon can be seen in the form XXX.XXXXX. Navigation between modes is now 2-way, using + and -, rather than just 1-way using PRO. The COMP ACTY toggle has been removed. | 25 December 2017, 19:46:55 UTC |
9fd4b4b | Ron Burkey | 24 December 2017, 21:20:59 UTC | Used wrong symbol for lamps/backlights off in manual-DSKY screenshots. | 24 December 2017, 21:20:59 UTC |
9e020c5 | Ron Burkey | 24 December 2017, 21:04:58 UTC | Forgot to add the screenshot feature for the "manual DSKY" mode. | 24 December 2017, 21:04:58 UTC |
e9fdba2 | Ron Burkey | 24 December 2017, 21:04:22 UTC | Fixed some killer bugs. | 24 December 2017, 21:04:22 UTC |
d7b4237 | Ron Burkey | 24 December 2017, 16:11:27 UTC | Fixed some python syntax errors. | 24 December 2017, 16:11:27 UTC |
ec161fd | Ron Burkey | 24 December 2017, 16:07:56 UTC | Forgot to add the --imu and --gps cli switches. | 24 December 2017, 16:07:56 UTC |
80e98c9 | Ron Burkey | 24 December 2017, 16:03:28 UTC | First cut at a version of piPeripheral.{py,agc} that responds correctly to --imu. There are hooks for --gps, but no actual code. | 24 December 2017, 16:03:28 UTC |
0448fef | Ron Burkey | 22 December 2017, 18:18:11 UTC | Made it default to English if the LANGUAGE variable is completely missing. | 22 December 2017, 18:18:11 UTC |
190820b | Ron Burkey | 22 December 2017, 17:14:02 UTC | Forgot to define TEXTDOMAIN. | 22 December 2017, 17:14:02 UTC |
36ac2ac | Ron Burkey | 22 December 2017, 16:42:07 UTC | Added a new --language option to runPiDSKY2.sh, because I'm not finding setting the LANGUAGE environment variable automatically as simple as I imagined. | 22 December 2017, 16:42:07 UTC |
47f0dc4 | Ron Burkey | 22 December 2017, 16:18:42 UTC | Corrected some message formatting. | 22 December 2017, 16:18:42 UTC |
3c85b1b | Ron Burkey | 22 December 2017, 16:14:17 UTC | Internationalized runPiDSKY2.sh. Only English and Italian were done ... and the Italian is just garbage, probably. The point is that it's a proof-of concept. All that needs to be done in the future to add (or correct) LC.po files (where LC is a 2-letter language code like es, de, fr, etc.) in the internationalization/ directory. Probably needs additional tweaks for right-to-left languages like Arabic. | 22 December 2017, 16:14:17 UTC |
d66b9fc | Ron Burkey | 22 December 2017, 11:42:55 UTC | Corrected some spelling in the manual-DSKY instructions. | 22 December 2017, 11:42:55 UTC |
307afd4 | Ron Burkey | 22 December 2017, 11:14:52 UTC | Added key-backlight control to the "manual DSKY" mode. | 22 December 2017, 11:14:52 UTC |
2320b6f | Ron Burkey | 21 December 2017, 15:27:39 UTC | Messed up the STBY lamp in manual DSKY mode. | 21 December 2017, 15:27:39 UTC |
7880334 | Ron Burkey | 21 December 2017, 15:17:24 UTC | More of the same. | 21 December 2017, 15:17:24 UTC |
6c5e3bd | Ron Burkey | 21 December 2017, 15:15:48 UTC | Improved the instructions a little. | 21 December 2017, 15:15:48 UTC |
1e39977 | Ron Burkey | 21 December 2017, 15:12:21 UTC | Added "manual DSKY" feature to maintenance menu. | 21 December 2017, 15:12:21 UTC |
540d4b9 | Ron Burkey | 21 December 2017, 13:13:15 UTC | Prevented RSET from being set as default in the replay menu. | 21 December 2017, 13:13:15 UTC |
4fe2b23 | Ron Burkey | 21 December 2017, 13:08:58 UTC | The update had become so quiet that no messages at all were being printed, so added some. | 21 December 2017, 13:08:58 UTC |
3d68858 | Ron Burkey | 21 December 2017, 13:07:04 UTC | Famous last words. | 21 December 2017, 13:07:04 UTC |
65b709e | Ron Burkey | 21 December 2017, 13:05:01 UTC | Okay, restarting after an update really is fixed now, I think. | 21 December 2017, 13:05:01 UTC |
d51554d | Ron Burkey | 21 December 2017, 12:44:25 UTC | I hadn't noticed this before, but the simulations no longer run after an update until runPiDSKY2.sh is exited and restarted; hopefully addressed. Also, I forgot to mention it in the prior commit message, but there had been a bug in which once a given simulation (say "5") had been run, other simulations (say "6") wouldn't run until runPiDSKY2.sh had been restarted. | 21 December 2017, 12:44:25 UTC |
d2a0e07 | Ron Burkey | 21 December 2017, 12:38:53 UTC | The default for the mission menu (and replay menu) now is set to whatever the last choice for that menu had been. | 21 December 2017, 12:38:53 UTC |
fa82814 | Ron Burkey | 21 December 2017, 01:50:12 UTC | Added a bunch of status messages to runPiDSKY2.sh maintenance menu. | 21 December 2017, 01:50:12 UTC |
10157d5 | Ron Burkey | 20 December 2017, 18:21:06 UTC | I think, fixed the "update" feature so that: a) it now longer balks if files have changed, and b) automatically restarts runPiDSKY2.sh. | 20 December 2017, 18:21:06 UTC |
dd3df38 | Ron Burkey | 20 December 2017, 17:59:09 UTC | Changed some of the lamp-test messages. | 20 December 2017, 17:59:09 UTC |
b31678e | Ron Burkey | 20 December 2017, 17:52:00 UTC | Added a lamp-test to runPiDSKY2.sh's maintenance menu. | 20 December 2017, 17:52:00 UTC |
c999e90 | Ron Burkey | 20 December 2017, 17:20:02 UTC | Added canned script for Apollo 11 landing (automatic). | 20 December 2017, 17:20:02 UTC |
c856dab | Ron Burkey | 20 December 2017, 15:00:59 UTC | Restructured menus so that most canned scenarios are removed from the mission menu and have a separate menu. | 20 December 2017, 15:00:59 UTC |
aab12ab | Ron Burkey | 19 December 2017, 15:10:09 UTC | Added the Apollo 11 launch DSKY-playback script, so that right now we temporarily have both Apollo 8 and 11 launch scripts on the runPiDSKY2.sh menu. We probably don't want both. | 19 December 2017, 15:10:09 UTC |
ad9c82b | Ron Burkey | 18 December 2017, 14:44:33 UTC | New Apollo 8 canned DSKY script from Nik, now with keystrokes. | 18 December 2017, 14:44:33 UTC |
22b5ff8 | Ron Burkey | 18 December 2017, 13:57:13 UTC | Made the bit-field messages printed by humanizeScript.py distinct for CM vs LM where appropriate. | 18 December 2017, 13:57:13 UTC |
f40fd75 | Ron Burkey | 17 December 2017, 19:08:20 UTC | yaDSKY2 was no longer building with wxWidgets in unicode configuration (as in Raspbian), but I hadn't noticed because I was using the ansi configuration. | 17 December 2017, 19:08:20 UTC |
774bae6 | Ron Burkey | 17 December 2017, 18:28:28 UTC | Fleshed out humanizeScript.py with lots more i/o ports ... all of them, I think, with the exception of a couple of "fictitious" i/o ports that I don't think were ever of interest to anybody but me. | 17 December 2017, 18:28:28 UTC |
2ea71c6 | Ron Burkey | 16 December 2017, 13:27:43 UTC | And another. | 16 December 2017, 13:27:43 UTC |