Skip to main content

Browse the archive

Revision 4e60f5e8014da9d2750262535e3d589ce9b638b2 authored by Lijie Han on 18 July 2007, 23:06:35 UTC, committed by Lijie Han on 18 July 2007, 23:06:35 UTC 
A    Coupler/MultiE_Coupler.py
 
M    Coupler/MultiC_Coupler.py

Fixed the synchronization part. Need to test on it. Now Embedded Couplers will wait until containing coupler make a decision.
1 parent b639d7b
Raw File
README 
  * To convert pseudo-free-surface B.C. to free-slip B.C., do the following:
      1) --solver.bc.topvbc=2 --> --solver.bc.topvbc=0
      2) --solver.bc.pseudo_free_surf=on --> --solver.bc.pseudo_free_surf=off

  * To try a different hot blob, one can specify three parameters:
    1. solver.ic.blob_center: Coordinates(theta,fi,r) of the center.
    2. solver.ic.blob_radius: Radius as non-dimensional distance.
    3. solver.ic.blob_dT:     The amount of temperature increase/decrease 
	                          within the blob as non-dimensional temperature.
	
    Note: It is required to keep "solver.ic.tic_method=2" to have the initial hot blob.
back to top