50bbd62 | Jonathan Neuschäfer | 27 February 2020, 17:07:01 UTC | dt-bindings: mfd: Fix typo in file name of twl-familly.txt Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Signed-off-by: Rob Herring <robh@kernel.org> | 03 March 2020, 22:39:05 UTC |
8c6687e | Jonathan Neuschäfer | 27 February 2020, 16:05:21 UTC | dt-bindings: mfd: tps65910: Improve grammar Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Signed-off-by: Rob Herring <robh@kernel.org> | 03 March 2020, 22:38:12 UTC |
b94858a | Jonathan Neuschäfer | 27 February 2020, 15:55:00 UTC | dt-bindings: mfd: zii,rave-sp: Fix a typo ("onborad") Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Signed-off-by: Rob Herring <robh@kernel.org> | 03 March 2020, 22:37:38 UTC |
ab4562f | Sébastien Szymanski | 25 February 2020, 12:39:04 UTC | dt-bindings: arm: fsl: fix APF6Dev compatible APF6 Dev compatible is armadeus,imx6dl-apf6dev and not armadeus,imx6dl-apf6dldev. Fixes: 3d735471d066 ("dt-bindings: arm: Document Armadeus SoM and Dev boards devicetree binding") Signed-off-by: Sébastien Szymanski <sebastien.szymanski@armadeus.com> Signed-off-by: Rob Herring <robh@kernel.org> | 02 March 2020, 22:24:50 UTC |
51a21e0 | Rob Herring | 21 February 2020, 22:27:10 UTC | dt-bindings: Fix dtc warnings in examples Fix all the warnings in the DT binding schema examples when built with 'W=1'. This is in preparation to make that the default for examples. Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Stephen Boyd <sboyd@kernel.org> Acked-by: Sam Ravnborg <sam@ravnborg.org> Acked-by: Vinod Koul <vkoul@kernel.org> Acked-by: Lee Jones <lee.jones@linaro.org> Acked-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Acked-by: Mark Brown <broonie@kernel.org> Acked-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Cc: Daniel Lezcano <daniel.lezcano@linaro.org> Cc: Kishon Vijay Abraham I <kishon@ti.com> Cc: Ulf Hansson <ulf.hansson@linaro.org> Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com> Cc: Krzysztof Kozlowski <krzk@kernel.org> Cc: Kukjin Kim <kgene@kernel.org> Cc: Jonathan Cameron <jic23@kernel.org> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: Chen-Yu Tsai <wens@csie.org> Cc: Maxime Ripard <mripard@kernel.org> Cc: Alexandre Torgue <alexandre.torgue@st.com> Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com> Signed-off-by: Rob Herring <robh@kernel.org> | 28 February 2020, 20:15:52 UTC |
a40df28 | Mauro Carvalho Chehab | 23 February 2020, 08:59:53 UTC | docs: dt: fix several broken doc references There are several DT doc references that require manual fixes. I found 3 cases fixed on this patch: - directory named "binding/" instead of "bindings/"; - .txt to .yaml renames; - file renames (still on txt format); Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com> Reviewed-by: Jérôme Pouiller <jerome.pouiller@silabs.com> Acked-by: Mark Brown <broonie@kernel.org> Signed-off-by: Rob Herring <robh@kernel.org> | 24 February 2020, 18:27:19 UTC |
54b3719 | Mauro Carvalho Chehab | 22 February 2020, 09:00:02 UTC | docs: dt: fix several broken references due to renames Several DT references got broken due to txt->yaml conversion. Those are auto-fixed by running: scripts/documentation-file-ref-check --fix Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Acked-by: Andrew Jeffery <andrew@aj.id.au> Reviewed-by: Dan Murphy <dmurphy@ti.com> Reviewed-by: Amit Kucheria <amit.kucheria@linaro.org> Signed-off-by: Rob Herring <robh@kernel.org> | 24 February 2020, 18:12:44 UTC |
3104abd | Lukas Bulwahn | 23 February 2020, 09:09:50 UTC | MAINTAINERS: clean up PCIE DRIVER FOR CAVIUM THUNDERX Commit e1ac611f57c9 ("dt-bindings: PCI: Convert generic host binding to DT schema") combines all information from pci-thunder-{pem,ecam}.txt into host-generic-pci.yaml, and deleted the two files in Documentation/devicetree/bindings/pci/. Since then, ./scripts/get_maintainer.pl --self-test complains: no file matches F: Documentation/devicetree/bindings/pci/pci-thunder-* As the PCIE DRIVER FOR CAVIUM THUNDERX-relevant information is only a small part of the host-generic-pci.yaml, do not add this file to the PCIE DRIVER FOR CAVIUM THUNDERX entry, and only drop the reference to the removed files. Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com> Acked-by: Robert Richter <rrichter@marvell.com> Signed-off-by: Rob Herring <robh@kernel.org> | 24 February 2020, 16:56:00 UTC |
854bdba | Maxime Ripard | 10 February 2020, 10:04:17 UTC | dt-bindings: media: csi: Fix clocks description Commit 1de243b07666 ("media: dt-bindings: media: sun4i-csi: Add compatible for CSI1 on A10/A20") introduced support for the CSI1 controller on A10 and A20 that unlike CSI0 doesn't have an ISP and therefore only have two clocks, the bus and module clocks. The clocks and clock-names properties have thus been modified to allow either two or tree clocks. However, the current list has the ISP clock at the second position, which means the bindings expects a list of either bus and isp, or bus, isp and mod. The initial intent of the patch was obviously to have bus and mod in the former case. Let's fix the binding so that it validates properly. Fixes: 1de243b07666 ("media: dt-bindings: media: sun4i-csi: Add compatible for CSI1 on A10/A20") Signed-off-by: Maxime Ripard <maxime@cerno.tech> Signed-off-by: Rob Herring <robh@kernel.org> | 20 February 2020, 01:03:44 UTC |
303d37b | Maxime Ripard | 10 February 2020, 10:04:16 UTC | dt-bindings: media: csi: Add interconnects properties The Allwinner CSI controller is sitting beside the MBUS that is represented as an interconnect. Make sure that the interconnect properties are valid in the binding. Fixes: 7866d6903ce8 ("media: dt-bindings: media: sun4i-csi: Add compatible for CSI0 on R40") Signed-off-by: Maxime Ripard <maxime@cerno.tech> Signed-off-by: Rob Herring <robh@kernel.org> | 20 February 2020, 01:03:44 UTC |
867c185 | Grygorii Strashko | 14 February 2020, 19:44:08 UTC | dt-bindings: net: mdio: remove compatible string from example Remove vendor specific compatible string from example, otherwise DT YAML schemas validation may trigger warnings specific to TI ti,davinci_mdio and not to the generic MDIO example. For example, the "bus_freq" is required for davinci_mdio, but not required for generic mdio example. As result following warning will be produced: mdio.example.dt.yaml: mdio@5c030000: 'bus_freq' is a required property Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: Rob Herring <robh@kernel.org> | 20 February 2020, 01:03:44 UTC |
3044d98 | Thierry Reding | 14 January 2020, 12:38:21 UTC | dt-bindings: memory-controller: Update example for Tegra124 EMC The example in the Tegra124 EMC device tree binding looks like an old version that doesn't contain all the required fields. Update it with a version from the current DTS files to fix the make dt_binding_check target. Reported-by: Rob Herring <robh+dt@kernel.org> Signed-off-by: Thierry Reding <treding@nvidia.com> [robh: also fix missing '#reset-cells'] Signed-off-by: Rob Herring <robh@kernel.org> | 20 February 2020, 01:03:16 UTC |
88d5271 | Tomas Paukrt | 22 January 2020, 20:10:39 UTC | dt-bindings: mmc: omap-hsmmc: Fix SDIO interrupt SDIO interrupt must be specified correctly as IRQ_TYPE_LEVEL_LOW instead of GPIO_ACTIVE_LOW. Signed-off-by: Tomas Paukrt <tomaspaukrt@email.cz> Signed-off-by: Rob Herring <robh@kernel.org> | 20 February 2020, 00:29:14 UTC |
bb6d3fb | Linus Torvalds | 10 February 2020, 00:08:48 UTC | Linux 5.6-rc1 | 10 February 2020, 00:08:48 UTC |
89a47dd | Linus Torvalds | 10 February 2020, 00:05:50 UTC | Merge tag 'kbuild-v5.6-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild Pull more Kbuild updates from Masahiro Yamada: - fix randconfig to generate a sane .config - rename hostprogs-y / always to hostprogs / always-y, which are more natual syntax. - optimize scripts/kallsyms - fix yes2modconfig and mod2yesconfig - make multiple directory targets ('make foo/ bar/') work * tag 'kbuild-v5.6-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: kbuild: make multiple directory targets work kconfig: Invalidate all symbols after changing to y or m. kallsyms: fix type of kallsyms_token_table[] scripts/kallsyms: change table to store (strcut sym_entry *) scripts/kallsyms: rename local variables in read_symbol() kbuild: rename hostprogs-y/always to hostprogs/always-y kbuild: fix the document to use extra-y for vmlinux.lds kconfig: fix broken dependency in randconfig-generated .config | 10 February 2020, 00:05:50 UTC |
380a129 | Linus Torvalds | 09 February 2020, 23:51:46 UTC | Merge tag 'zonefs-5.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/zonefs Pull new zonefs file system from Damien Le Moal: "Zonefs is a very simple file system exposing each zone of a zoned block device as a file. Unlike a regular file system with native zoned block device support (e.g. f2fs or the on-going btrfs effort), zonefs does not hide the sequential write constraint of zoned block devices to the user. As a result, zonefs is not a POSIX compliant file system. Its goal is to simplify the implementation of zoned block devices support in applications by replacing raw block device file accesses with a richer file based API, avoiding relying on direct block device file ioctls which may be more obscure to developers. One example of this approach is the implementation of LSM (log-structured merge) tree structures (such as used in RocksDB and LevelDB) on zoned block devices by allowing SSTables to be stored in a zone file similarly to a regular file system rather than as a range of sectors of a zoned device. The introduction of the higher level construct "one file is one zone" can help reducing the amount of changes needed in the application while at the same time allowing the use of zoned block devices with various programming languages other than C. Zonefs IO management implementation uses the new iomap generic code. Zonefs has been successfully tested using a functional test suite (available with zonefs userland format tool on github) and a prototype implementation of LevelDB on top of zonefs" * tag 'zonefs-5.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/zonefs: zonefs: Add documentation fs: New zonefs file system | 09 February 2020, 23:51:46 UTC |
490d332 | Marc Zyngier | 09 February 2020, 22:48:50 UTC | irqchip/gic-v4.1: Avoid 64bit division for the sake of 32bit ARM In order to allow the GICv4 code to link properly on 32bit ARM, make sure we don't use 64bit divisions when it isn't strictly necessary. Fixes: 4e6437f12d6e ("irqchip/gic-v4.1: Ensure L2 vPE table is allocated at RD level") Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Zenghui Yu <yuzenghui@huawei.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 09 February 2020, 23:47:37 UTC |
d1ea35f | Linus Torvalds | 09 February 2020, 21:27:17 UTC | Merge tag '5.6-rc-smb3-plugfest-patches' of git://git.samba.org/sfrench/cifs-2.6 Pull cifs fixes from Steve French: "13 cifs/smb3 patches, most from testing at the SMB3 plugfest this week: - Important fix for multichannel and for modefromsid mounts. - Two reconnect fixes - Addition of SMB3 change notify support - Backup tools fix - A few additional minor debug improvements (tracepoints and additional logging found useful during testing this week)" * tag '5.6-rc-smb3-plugfest-patches' of git://git.samba.org/sfrench/cifs-2.6: smb3: Add defines for new information level, FileIdInformation smb3: print warning once if posix context returned on open smb3: add one more dynamic tracepoint missing from strict fsync path cifs: fix mode bits from dir listing when mounted with modefromsid cifs: fix channel signing cifs: add SMB3 change notification support cifs: make multichannel warning more visible cifs: fix soft mounts hanging in the reconnect code cifs: Add tracepoints for errors on flush or fsync cifs: log warning message (once) if out of disk space cifs: fail i/o on soft mounts if sessionsetup errors out smb3: fix problem with null cifs super block with previous patch SMB3: Backup intent flag missing from some more ops | 09 February 2020, 21:27:17 UTC |
5586c3c | Linus Torvalds | 09 February 2020, 20:41:00 UTC | Merge branch 'work.vboxsf' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull vboxfs from Al Viro: "This is the VirtualBox guest shared folder support by Hans de Goede, with fixups for fs_parse folded in to avoid bisection hazards from those API changes..." * 'work.vboxsf' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: fs: Add VirtualBox guest shared folder (vboxsf) support | 09 February 2020, 20:41:00 UTC |
1a2a76c | Linus Torvalds | 09 February 2020, 20:11:12 UTC | Merge tag 'x86-urgent-2020-02-09' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fixes from Thomas Gleixner: "A set of fixes for X86: - Ensure that the PIT is set up when the local APIC is disable or configured in legacy mode. This is caused by an ordering issue introduced in the recent changes which skip PIT initialization when the TSC and APIC frequencies are already known. - Handle malformed SRAT tables during early ACPI parsing which caused an infinite loop anda boot hang. - Fix a long standing race in the affinity setting code which affects PCI devices with non-maskable MSI interrupts. The problem is caused by the non-atomic writes of the MSI address (destination APIC id) and data (vector) fields which the device uses to construct the MSI message. The non-atomic writes are mandated by PCI. If both fields change and the device raises an interrupt after writing address and before writing data, then the MSI block constructs a inconsistent message which causes interrupts to be lost and subsequent malfunction of the device. The fix is to redirect the interrupt to the new vector on the current CPU first and then switch it over to the new target CPU. This allows to observe an eventually raised interrupt in the transitional stage (old CPU, new vector) to be observed in the APIC IRR and retriggered on the new target CPU and the new vector. The potential spurious interrupts caused by this are harmless and can in the worst case expose a buggy driver (all handlers have to be able to deal with spurious interrupts as they can and do happen for various reasons). - Add the missing suspend/resume mechanism for the HYPERV hypercall page which prevents resume hibernation on HYPERV guests. This change got lost before the merge window. - Mask the IOAPIC before disabling the local APIC to prevent potentially stale IOAPIC remote IRR bits which cause stale interrupt lines after resume" * tag 'x86-urgent-2020-02-09' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/apic: Mask IOAPIC entries when disabling the local APIC x86/hyperv: Suspend/resume the hypercall page for hibernation x86/apic/msi: Plug non-maskable MSI affinity race x86/boot: Handle malformed SRAT tables during early ACPI parsing x86/timer: Don't skip PIT setup when APIC is disabled or in legacy mode | 09 February 2020, 20:11:12 UTC |
f413776 | Linus Torvalds | 09 February 2020, 20:09:43 UTC | Merge tag 'smp-urgent-2020-02-09' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull SMP fixes from Thomas Gleixner: "Two fixes for the SMP related functionality: - Make the UP version of smp_call_function_single() match SMP semantics when called for a not available CPU. Instead of emitting a warning and assuming that the function call target is CPU0, return a proper error code like the SMP version does. - Remove a superfluous check in smp_call_function_many_cond()" * tag 'smp-urgent-2020-02-09' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: smp/up: Make smp_call_function_single() match SMP semantics smp: Remove superfluous cond_func check in smp_call_function_many_cond() | 09 February 2020, 20:09:43 UTC |
ca21b9b | Linus Torvalds | 09 February 2020, 20:04:09 UTC | Merge tag 'perf-urgent-2020-02-09' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull perf fixes from Thomas Gleixner: "A set of fixes and improvements for the perf subsystem: Kernel fixes: - Install cgroup events to the correct CPU context to prevent a potential list double add - Prevent an integer underflow in the perf mlock accounting - Add a missing prototype for arch_perf_update_userpage() Tooling: - Add a missing unlock in the error path of maps__insert() in perf maps. - Fix the build with the latest libbfd - Fix the perf parser so it does not delete parse event terms, which caused a regression for using perf with the ARM CoreSight as the sink configuration was missing due to the deletion. - Fix the double free in the perf CPU map merging test case - Add the missing ustring support for the perf probe command" * tag 'perf-urgent-2020-02-09' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf maps: Add missing unlock to maps__insert() error case perf probe: Add ustring support for perf probe command perf: Make perf able to build with latest libbfd perf test: Fix test case Merge cpu map perf parse: Copy string to perf_evsel_config_term perf parse: Refactor 'struct perf_evsel_config_term' kernel/events: Add a missing prototype for arch_perf_update_userpage() perf/cgroups: Install cgroup events to correct cpuctx perf/core: Fix mlock accounting in perf_mmap() | 09 February 2020, 20:04:09 UTC |
2fbc23c | Linus Torvalds | 09 February 2020, 20:00:12 UTC | Merge tag 'timers-urgent-2020-02-09' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull timer fixes from Thomas Gleixner: "Two small fixes for the time(r) subsystem: - Handle a subtle race between the clocksource watchdog and a concurrent clocksource watchdog stop/start sequence correctly to prevent a timer double add bug. - Fix the file path for the core time namespace file" * tag 'timers-urgent-2020-02-09' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: clocksource: Prevent double add_timer_on() for watchdog_timer MAINTAINERS: Correct path to time namespace source file | 09 February 2020, 20:00:12 UTC |
f06bed8 | Linus Torvalds | 09 February 2020, 19:56:41 UTC | Merge tag 'irq-urgent-2020-02-09' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull interrupt fixes from Thomas Gleixner: "A set of fixes for the interrupt subsystem: - Provision only ACPI enabled redistributors on GICv3 - Use the proper command colums when building the INVALL command for the GICv3-ITS - Ensure the allocation of the L2 vPE table for GICv4.1 - Correct the GICv4.1 VPROBASER programming so it uses the proper size - A set of small GICv4.1 tidy up patches - Configuration cleanup for C-SKY interrupt chip - Clarify the function documentation for irq_set_wake() to document that the wakeup functionality is orthogonal to the irq disable/enable mechanism" * tag 'irq-urgent-2020-02-09' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: irqchip/gic-v3-its: Rename VPENDBASER/VPROPBASER accessors irqchip/gic-v3-its: Remove superfluous WARN_ON irqchip/gic-v4.1: Drop 'tmp' in inherit_vpe_l1_table_from_rd() irqchip/gic-v4.1: Ensure L2 vPE table is allocated at RD level irqchip/gic-v4.1: Set vpe_l1_base for all redistributors irqchip/gic-v4.1: Fix programming of GICR_VPROPBASER_4_1_SIZE genirq: Clarify that irq wake state is orthogonal to enable/disable irqchip/gic-v3-its: Reference to its_invall_cmd descriptor when building INVALL irqchip: Some Kconfig cleanup for C-SKY irqchip/gic-v3: Only provision redistributors that are enabled in ACPI | 09 February 2020, 19:56:41 UTC |
6ff90aa | Linus Torvalds | 09 February 2020, 19:54:50 UTC | Merge tag 'efi-urgent-2020-02-09' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull EFI fix from Thomas Gleixner: "A single fix for a EFI boot regression on X86 which was caused by the recent rework of the EFI memory map parsing. On systems with invalid memmap entries the cleanup function uses an value which cannot be relied on in this stage. Use the actual EFI memmap entry instead" * tag 'efi-urgent-2020-02-09' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: efi/x86: Fix boot regression on systems with invalid memmap entries | 09 February 2020, 19:54:50 UTC |
fdfa3a6 | Linus Torvalds | 09 February 2020, 01:24:41 UTC | Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi Pull misc SCSI fixes from James Bottomley: "Five small patches, all in drivers or doc, which missed the initial pull request. The qla2xxx and megaraid_sas are actual fixes and the rest are spelling and doc changes" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: ufs: fix spelling mistake "initilized" -> "initialized" scsi: pm80xx: fix spelling mistake "to" -> "too" scsi: MAINTAINERS: ufs: remove pedrom.sousa@synopsys.com scsi: megaraid_sas: fixup MSIx interrupt setup during resume scsi: qla2xxx: Fix unbound NVME response length | 09 February 2020, 01:24:41 UTC |
291abfe | Linus Torvalds | 09 February 2020, 01:15:08 UTC | Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net Pull networking fixes from David Miller: 1) Unbalanced locking in mwifiex_process_country_ie, from Brian Norris. 2) Fix thermal zone registration in iwlwifi, from Andrei Otcheretianski. 3) Fix double free_irq in sgi ioc3 eth, from Thomas Bogendoerfer. 4) Use after free in mptcp, from Florian Westphal. 5) Use after free in wireguard's root_remove_peer_lists, from Eric Dumazet. 6) Properly access packets heads in bonding alb code, from Eric Dumazet. 7) Fix data race in skb_queue_len(), from Qian Cai. 8) Fix regression in r8169 on some chips, from Heiner Kallweit. 9) Fix XDP program ref counting in hv_netvsc, from Haiyang Zhang. 10) Certain kinds of set link netlink operations can cause a NULL deref in the ipv6 addrconf code. Fix from Eric Dumazet. 11) Don't cancel uninitialized work queue in drop monitor, from Ido Schimmel. * git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (84 commits) net: thunderx: use proper interface type for RGMII mt76: mt7615: fix max_nss in mt7615_eeprom_parse_hw_cap bpf: Improve bucket_log calculation logic selftests/bpf: Test freeing sockmap/sockhash with a socket in it bpf, sockhash: Synchronize_rcu before free'ing map bpf, sockmap: Don't sleep while holding RCU lock on tear-down bpftool: Don't crash on missing xlated program instructions bpf, sockmap: Check update requirements after locking drop_monitor: Do not cancel uninitialized work item mlxsw: spectrum_dpipe: Add missing error path mlxsw: core: Add validation of hardware device types for MGPIR register mlxsw: spectrum_router: Clear offload indication from IPv6 nexthops on abort selftests: mlxsw: Add test cases for local table route replacement mlxsw: spectrum_router: Prevent incorrect replacement of local table routes net: dsa: microchip: enable module autoprobe ipv6/addrconf: fix potential NULL deref in inet6_set_link_af() dpaa_eth: support all modes with rate adapting PHYs net: stmmac: update pci platform data to use phy_interface net: stmmac: xgmac: fix missing IFF_MULTICAST checki in dwxgmac2_set_filter net: stmmac: fix missing IFF_MULTICAST check in dwmac4_set_filter ... | 09 February 2020, 01:15:08 UTC |
0fd1695 | Hans de Goede | 12 December 2019, 14:09:14 UTC | fs: Add VirtualBox guest shared folder (vboxsf) support VirtualBox hosts can share folders with guests, this commit adds a VFS driver implementing the Linux-guest side of this, allowing folders exported by the host to be mounted under Linux. This driver depends on the guest <-> host IPC functions exported by the vboxguest driver. Acked-by: Christoph Hellwig <hch@infradead.org> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> | 08 February 2020, 22:34:58 UTC |
d4f309c | Linus Torvalds | 08 February 2020, 22:28:26 UTC | Merge tag 'powerpc-5.6-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull powerpc fixes from Michael Ellerman: - Fix an existing bug in our user access handling, exposed by one of the bug fixes we merged this cycle. - A fix for a boot hang on 32-bit with CONFIG_TRACE_IRQFLAGS and the recently added CONFIG_VMAP_STACK. Thanks to: Christophe Leroy, Guenter Roeck. * tag 'powerpc-5.6-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: powerpc: Fix CONFIG_TRACE_IRQFLAGS with CONFIG_VMAP_STACK powerpc/futex: Fix incorrect user access blocking | 08 February 2020, 22:28:26 UTC |
b0ef7cd | Linus Torvalds | 08 February 2020, 22:19:39 UTC | Fix up remaining devm_ioremap_nocache() in SGI IOC3 8250 UART driver This is a merge error on my part - the driver was merged into mainline by commit c5951e7c8ee5 ("Merge tag 'mips_5.6' of git://../mips/linux") over a week ago, but nobody apparently noticed that it didn't actually build due to still having a reference to the devm_ioremap_nocache() function, removed a few days earlier through commit 6a1000bd2703 ("Merge tag 'ioremap-5.6' of git://../ioremap"). Apparently this didn't get any build testing anywhere. Not perhaps all that surprising: it's restricted to 64-bit MIPS only, and only with the new SGI_MFD_IOC3 support enabled. I only noticed because the ioremap conflicts in the ARM SoC driver update made me check there weren't any others hiding, and I found this one. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 08 February 2020, 22:19:39 UTC |
4ef1a30 | Linus Torvalds | 08 February 2020, 22:17:27 UTC | Merge tag 'armsoc-late' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull ARM SoC late updates from Olof Johansson: "This is some material that we picked up into our tree late, or that had more complex dependencies on more than one topic branch that makes sense to keep separately. - TI support for secure accelerators and hwrng on OMAP4/5 - TI camera changes for dra7 and am437x and SGX improvement due to better reset control support on am335x, am437x and dra7 - Davinci moves to proper clocksource on DM365, and regulator/audio improvements for DM365 and DM644x eval boards" * tag 'armsoc-late' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (32 commits) ARM: dts: omap4-droid4: Enable hdq for droid4 ds250x 1-wire battery nvmem ARM: dts: motorola-cpcap-mapphone: Configure calibration interrupt ARM: dts: Configure interconnect target module for am437x sgx ARM: dts: Configure sgx for dra7 ARM: dts: Configure rstctrl reset for am335x SGX ARM: dts: dra7: Add ti-sysc node for VPE ARM: dts: dra7: add vpe clkctrl node ARM: dts: am43x-epos-evm: Add VPFE and OV2659 entries ARM: dts: am437x-sk-evm: Add VPFE and OV2659 entries ARM: dts: am43xx: add support for clkout1 clock arm: dts: dra76-evm: Add CAL and OV5640 nodes arm: dtsi: dra76x: Add CAL dtsi node arm: dts: dra72-evm-common: Add entries for the CSI2 cameras ARM: dts: DRA72: Add CAL dtsi node ARM: dts: dra7-l4: Add ti-sysc node for CAM ARM: OMAP: DRA7xx: Make CAM clock domain SWSUP only ARM: dts: dra7: add cam clkctrl node ARM: OMAP2+: Drop legacy platform data for omap4 des ARM: OMAP2+: Drop legacy platform data for omap4 sham ARM: OMAP2+: Drop legacy platform data for omap4 aes ... | 08 February 2020, 22:17:27 UTC |
5939224 | Linus Torvalds | 08 February 2020, 22:15:41 UTC | Merge tag 'armsoc-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull ARM SoC defconfig updates from Olof Johansson: "We keep this in a separate branch to avoid cross-branch conflicts, but most of the material here is fairly boring -- some new drivers turned on for hardware since they were merged, and some refreshed files due to time having moved a lot of entries around" * tag 'armsoc-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (38 commits) ARM: configs: at91: enable MMC_SDHCI_OF_AT91 and MICROCHIP_PIT64B arm64: defconfig: Enable Broadcom's GENET Ethernet controller ARM: multi_v7_defconfig: Enable devfreq thermal integration ARM: exynos_defconfig: Enable devfreq thermal integration ARM: multi_v7_defconfig: Enable NFS v4.1 and v4.2 ARM: exynos_defconfig: Enable NFS v4.1 and v4.2 arm64: defconfig: Enable Actions Semi specific drivers arm64: defconfig: Enable Broadcom's STB PCIe controller arm64: defconfig: Enable CONFIG_CLK_IMX8MP by default ARM: configs: at91: enable config flags for sam9x60 SoC ARM: configs: at91: use savedefconfig arm64: defconfig: Enable tegra XUDC support ARM: defconfig: gemini: Update defconfig arm64: defconfig: enable CONFIG_ARM_QCOM_CPUFREQ_NVMEM arm64: defconfig: enable CONFIG_QCOM_CPR arm64: defconfig: Enable HFPLL arm64: defconfig: Enable CRYPTO_DEV_FSL_CAAM ARM: imx_v6_v7_defconfig: Select the TFP410 driver ARM: imx_v6_v7_defconfig: Enable NFS_V4_1 and NFS_V4_2 support arm64: defconfig: Enable ATH10K_SNOC ... | 08 February 2020, 22:15:41 UTC |
eab3540 | Linus Torvalds | 08 February 2020, 22:04:19 UTC | Merge tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull ARM SoC-related driver updates from Olof Johansson: "Various driver updates for platforms: - Nvidia: Fuse support for Tegra194, continued memory controller pieces for Tegra30 - NXP/FSL: Refactorings of QuickEngine drivers to support ARM/ARM64/PPC - NXP/FSL: i.MX8MP SoC driver pieces - TI Keystone: ring accelerator driver - Qualcomm: SCM driver cleanup/refactoring + support for new SoCs. - Xilinx ZynqMP: feature checking interface for firmware. Mailbox communication for power management - Overall support patch set for cpuidle on more complex hierarchies (PSCI-based) and misc cleanups, refactorings of Marvell, TI, other platforms" * tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (166 commits) drivers: soc: xilinx: Use mailbox IPI callback dt-bindings: power: reset: xilinx: Add bindings for ipi mailbox drivers: soc: ti: knav_qmss_queue: Pass lockdep expression to RCU lists MAINTAINERS: Add brcmstb PCIe controller entry soc/tegra: fuse: Unmap registers once they are not needed anymore soc/tegra: fuse: Correct straps' address for older Tegra124 device trees soc/tegra: fuse: Warn if straps are not ready soc/tegra: fuse: Cache values of straps and Chip ID registers memory: tegra30-emc: Correct error message for timed out auto calibration memory: tegra30-emc: Firm up hardware programming sequence memory: tegra30-emc: Firm up suspend/resume sequence soc/tegra: regulators: Do nothing if voltage is unchanged memory: tegra: Correct reset value of xusb_hostr soc/tegra: fuse: Add APB DMA dependency for Tegra20 bus: tegra-aconnect: Remove PM_CLK dependency dt-bindings: mediatek: add MT6765 power dt-bindings soc: mediatek: cmdq: delete not used define memory: tegra: Add support for the Tegra194 memory controller memory: tegra: Only include support for enabled SoCs memory: tegra: Support DVFS on Tegra186 and later ... | 08 February 2020, 22:04:19 UTC |
1afa9c3 | Linus Torvalds | 08 February 2020, 21:58:44 UTC | Merge tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull ARM Device-tree updates from Olof Johansson: "New SoCs: - Atmel/Microchip SAM9X60 (ARM926 SoC) - OMAP 37xx gets split into AM3703/AM3715/DM3725, who are all variants of it with different GPU/media IP configurations. - ST stm32mp15 SoCs (1-2 Cortex-A7, CAN, GPU depending on SKU) - ST Ericsson ab8505 (variant of ab8500) and db8520 (variant of db8500) - Unisoc SC9863A SoC (8x Cortex-A55 mobile chipset w/ GPU, modem) - Qualcomm SC7180 (8-core 64bit SoC, unnamed CPU class) New boards: - Allwinner: + Emlid Neutis SoM (H3 variant) + Libre Computer ALL-H3-IT + PineH64 Model B - Amlogic: + Libretech Amlogic GX PC (s905d and s912-based variants) - Atmel/Microchip: + Kizboxmini, sam9x60 EK, sama5d27 Wireless SOM (wlsom1) - Marvell: + Armada 385-based SolidRun Clearfog GTR - NXP: + Gateworks GW59xx boards based on i.MX6/6Q/6QDL + Tolino Shine 3 eBook reader (i.MX6sl) + Embedded Artists COM (i.MX7ULP) + SolidRun CLearfog CX/ITX and HoneyComb (LX2160A-based systems) + Google Coral Edge TPU (i.MX8MQ) - Rockchip: + Radxa Dalang Carrier (supports rk3288 and rk3399 SOMs) + Radxa Rock Pi N10 (RK3399Pro-based) + VMARC RK3399Pro SOM - ST: + Reference boards for stm32mp15 - ST Ericsson: + Samsung Galaxy S III mini (GT-I8190) + HREF520 reference board for DB8520 - TI OMAP: + Gen1 Amazon Echo (OMAP3630-based) - Qualcomm: + Inforce 6640 Single Board Computer (msm8996-based) + SC7180 IDP (SC7180-based)" * tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (623 commits) dt-bindings: fix compilation error of the example in marvell,mmp3-hsic-phy.yaml arm64: dts: ti: k3-am654-base-board: Add CSI2 OV5640 camera arm64: dts: ti: k3-am65-main Add CAL node arm64: dts: ti: k3-j721e-main: Add McASP nodes arm64: dts: ti: k3-am654-main: Add McASP nodes arm64: dts: ti: k3-j721e: DMA support arm64: dts: ti: k3-j721e-main: Move secure proxy and smmu under main_navss arm64: dts: ti: k3-j721e-main: Correct main NAVSS representation arm64: dts: ti: k3-j721e: Correct the address for MAIN NAVSS arm64: dts: ti: k3-am65: DMA support arm64: dts: ti: k3-am65-main: Move secure proxy under cbass_main_navss arm64: dts: ti: k3-am65-main: Correct main NAVSS representation ARM: dts: aspeed: rainier: Add UCD90320 power sequencer ARM: dts: aspeed: rainier: Switch PSUs to unknown version arm64: dts: rockchip: Kill off "simple-panel" compatibles ARM: dts: rockchip: Kill off "simple-panel" compatibles arm64: dts: rockchip: rename dwmmc node names to mmc ARM: dts: rockchip: rename dwmmc node names to mmc arm64: dts: exynos: Rename Samsung and Exynos to lowercase arm64: dts: uniphier: add reset-names to NAND controller node ... | 08 February 2020, 21:58:44 UTC |
469030d | Linus Torvalds | 08 February 2020, 21:55:25 UTC | Merge tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull ARM SoC platform updates from Olof Johansson: "Most of these are smaller fixes that have accrued, and some continued cleanup of OMAP platforms towards shared frameworks. One new SoC from Atmel/Microchip: sam9x60" * tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (35 commits) ARM: OMAP2+: Fix undefined reference to omap_secure_init ARM: s3c64xx: Drop unneeded select of TIMER_OF ARM: exynos: Drop unneeded select of MIGHT_HAVE_CACHE_L2X0 ARM: s3c24xx: Switch to atomic pwm API in rx1950 ARM: OMAP2+: sleep43xx: Call secure suspend/resume handlers ARM: OMAP2+: Use ARM SMC Calling Convention when OP-TEE is available ARM: OMAP2+: Introduce check for OP-TEE in omap_secure_init() ARM: OMAP2+: Add omap_secure_init callback hook for secure initialization ARM: at91: Documentation: add sam9x60 product and datasheet ARM: at91: pm: use of_device_id array to find the proper shdwc node ARM: at91: pm: use SAM9X60 PMC's compatible ARM: imx: only select ARM_ERRATA_814220 for ARMv7-A ARM: zynq: use physical cpuid in zynq_slcr_cpu_stop/start ARM: tegra: Use clk_m CPU on Tegra124 LP1 resume ARM: tegra: Modify reshift divider during LP1 ARM: tegra: Enable PLLP bypass during Tegra124 LP1 ARM: samsung: Rename Samsung and Exynos to lowercase ARM: exynos: Correct the help text for platform Kconfig option ARM: bcm: Select ARM_AMBA for ARCH_BRCMSTB ARM: brcmstb: Add debug UART entry for 7216 ... | 08 February 2020, 21:55:25 UTC |
b85080c | Linus Torvalds | 08 February 2020, 21:44:41 UTC | Merge tag 'compat-ioctl-fix' of git://git.kernel.org:/pub/scm/linux/kernel/git/arnd/playground Pull compat-ioctl fix from Arnd Bergmann: "One patch in the compat-ioctl series broke 32-bit rootfs for multiple people testing on 64-bit kernels. Let's fix it in -rc1 before others run into the same issue" * tag 'compat-ioctl-fix' of git://git.kernel.org:/pub/scm/linux/kernel/git/arnd/playground: compat_ioctl: fix FIONREAD on devices | 08 February 2020, 21:44:41 UTC |
c9d35ee | Linus Torvalds | 08 February 2020, 21:26:41 UTC | Merge branch 'merge.nfs-fs_parse.1' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull vfs file system parameter updates from Al Viro: "Saner fs_parser.c guts and data structures. The system-wide registry of syntax types (string/enum/int32/oct32/.../etc.) is gone and so is the horror switch() in fs_parse() that would have to grow another case every time something got added to that system-wide registry. New syntax types can be added by filesystems easily now, and their namespace is that of functions - not of system-wide enum members. IOW, they can be shared or kept private and if some turn out to be widely useful, we can make them common library helpers, etc., without having to do anything whatsoever to fs_parse() itself. And we already get that kind of requests - the thing that finally pushed me into doing that was "oh, and let's add one for timeouts - things like 15s or 2h". If some filesystem really wants that, let them do it. Without somebody having to play gatekeeper for the variants blessed by direct support in fs_parse(), TYVM. Quite a bit of boilerplate is gone. And IMO the data structures make a lot more sense now. -200LoC, while we are at it" * 'merge.nfs-fs_parse.1' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (25 commits) tmpfs: switch to use of invalfc() cgroup1: switch to use of errorfc() et.al. procfs: switch to use of invalfc() hugetlbfs: switch to use of invalfc() cramfs: switch to use of errofc() et.al. gfs2: switch to use of errorfc() et.al. fuse: switch to use errorfc() et.al. ceph: use errorfc() and friends instead of spelling the prefix out prefix-handling analogues of errorf() and friends turn fs_param_is_... into functions fs_parse: handle optional arguments sanely fs_parse: fold fs_parameter_desc/fs_parameter_spec fs_parser: remove fs_parameter_description name field add prefix to fs_context->log ceph_parse_param(), ceph_parse_mon_ips(): switch to passing fc_log new primitive: __fs_parse() switch rbd and libceph to p_log-based primitives struct p_log, variants of warnf() et.al. taking that one instead teach logfc() to handle prefices, give it saner calling conventions get rid of cg_invalf() ... | 08 February 2020, 21:26:41 UTC |
236f453 | Linus Torvalds | 08 February 2020, 21:04:49 UTC | Merge branch 'work.misc' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull misc vfs updates from Al Viro: - bmap series from cmaiolino - getting rid of convolutions in copy_mount_options() (use a couple of copy_from_user() instead of the __get_user() crap) * 'work.misc' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: saner copy_mount_options() fibmap: Reject negative block numbers fibmap: Use bmap instead of ->bmap method in ioctl_fibmap ecryptfs: drop direct calls to ->bmap cachefiles: drop direct usage of ->bmap method. fs: Enable bmap() function to properly return errors | 08 February 2020, 21:04:49 UTC |
9959333 | Linus Torvalds | 08 February 2020, 19:44:02 UTC | Merge branch 'pipe-exclusive-wakeup' Merge thundering herd avoidance on pipe IO. This would have been applied for 5.5 already, but got delayed because of a user-space race condition in the GNU make jobserver code. Now that there's a new GNU make 4.3 release, and most distributions seem to have at least applied the (almost three year old) fix for the problem, let's see if people notice. And it might have been just bad random timing luck on my machine. If you do hit the race condition, things will still work, but the symptom is that you don't get nearly the expected parallelism when using "make -j<N>". The jobserver bug can definitely happen without this patch too, but seems to be easier to trigger when we no longer wake up pipe waiters unnecessarily. * pipe-exclusive-wakeup: pipe: use exclusive waits when reading or writing | 08 February 2020, 19:44:02 UTC |
0ddad21 | Linus Torvalds | 09 December 2019, 17:48:27 UTC | pipe: use exclusive waits when reading or writing This makes the pipe code use separate wait-queues and exclusive waiting for readers and writers, avoiding a nasty thundering herd problem when there are lots of readers waiting for data on a pipe (or, less commonly, lots of writers waiting for a pipe to have space). While this isn't a common occurrence in the traditional "use a pipe as a data transport" case, where you typically only have a single reader and a single writer process, there is one common special case: using a pipe as a source of "locking tokens" rather than for data communication. In particular, the GNU make jobserver code ends up using a pipe as a way to limit parallelism, where each job consumes a token by reading a byte from the jobserver pipe, and releases the token by writing a byte back to the pipe. This pattern is fairly traditional on Unix, and works very well, but will waste a lot of time waking up a lot of processes when only a single reader needs to be woken up when a writer releases a new token. A simplified test-case of just this pipe interaction is to create 64 processes, and then pass a single token around between them (this test-case also intentionally passes another token that gets ignored to test the "wake up next" logic too, in case anybody wonders about it): #include <unistd.h> int main(int argc, char **argv) { int fd[2], counters[2]; pipe(fd); counters[0] = 0; counters[1] = -1; write(fd[1], counters, sizeof(counters)); /* 64 processes */ fork(); fork(); fork(); fork(); fork(); fork(); do { int i; read(fd[0], &i, sizeof(i)); if (i < 0) continue; counters[0] = i+1; write(fd[1], counters, (1+(i & 1)) *sizeof(int)); } while (counters[0] < 1000000); return 0; } and in a perfect world, passing that token around should only cause one context switch per transfer, when the writer of a token causes a directed wakeup of just a single reader. But with the "writer wakes all readers" model we traditionally had, on my test box the above case causes more than an order of magnitude more scheduling: instead of the expected ~1M context switches, "perf stat" shows 231,852.37 msec task-clock # 15.857 CPUs utilized 11,250,961 context-switches # 0.049 M/sec 616,304 cpu-migrations # 0.003 M/sec 1,648 page-faults # 0.007 K/sec 1,097,903,998,514 cycles # 4.735 GHz 120,781,778,352 instructions # 0.11 insn per cycle 27,997,056,043 branches # 120.754 M/sec 283,581,233 branch-misses # 1.01% of all branches 14.621273891 seconds time elapsed 0.018243000 seconds user 3.611468000 seconds sys before this commit. After this commit, I get 5,229.55 msec task-clock # 3.072 CPUs utilized 1,212,233 context-switches # 0.232 M/sec 103,951 cpu-migrations # 0.020 M/sec 1,328 page-faults # 0.254 K/sec 21,307,456,166 cycles # 4.074 GHz 12,947,819,999 instructions # 0.61 insn per cycle 2,881,985,678 branches # 551.096 M/sec 64,267,015 branch-misses # 2.23% of all branches 1.702148350 seconds time elapsed 0.004868000 seconds user 0.110786000 seconds sys instead. Much better. [ Note! This kernel improvement seems to be very good at triggering a race condition in the make jobserver (in GNU make 4.2.1) for me. It's a long known bug that was fixed back in June 2017 by GNU make commit b552b0525198 ("[SV 51159] Use a non-blocking read with pselect to avoid hangs."). But there wasn't a new release of GNU make until 4.3 on Jan 19 2020, so a number of distributions may still have the buggy version. Some have backported the fix to their 4.2.1 release, though, and even without the fix it's quite timing-dependent whether the bug actually is hit. ] Josh Triplett says: "I've been hammering on your pipe fix patch (switching to exclusive wait queues) for a month or so, on several different systems, and I've run into no issues with it. The patch *substantially* improves parallel build times on large (~100 CPU) systems, both with parallel make and with other things that use make's pipe-based jobserver. All current distributions (including stable and long-term stable distributions) have versions of GNU make that no longer have the jobserver bug" Tested-by: Josh Triplett <josh@joshtriplett.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 08 February 2020, 19:39:19 UTC |
0a06174 | Arnd Bergmann | 07 February 2020, 16:55:48 UTC | compat_ioctl: fix FIONREAD on devices My final cleanup patch for sys_compat_ioctl() introduced a regression on the FIONREAD ioctl command, which is used for both regular and special files, but only works on regular files after my patch, as I had missed the warning that Al Viro put into a comment right above it. Change it back so it can work on any file again by moving the implementation to do_vfs_ioctl() instead. Fixes: 77b9040195de ("compat_ioctl: simplify the implementation") Reported-and-tested-by: Christian Zigotzky <chzigotzky@xenosoft.de> Reported-and-tested-by: youling257 <youling257@gmail.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de> | 08 February 2020, 17:02:54 UTC |
2f86e45 | Thomas Gleixner | 08 February 2020, 14:54:03 UTC | Merge tag 'irqchip-fixes-5.6-1' of git://git.kernel.org/pub/scm/linux/kernel/git/maz/arm-platforms into irq/urgent Pull irqchip fixes for 5.6, take #1 from Marc Zyngier: - Guarantee allocation of L2 vPE table for GICv4.1 - Fix GICv4.1 VPROPBASER programming - Numerous GICv4.1 tidy ups - Fix disabled GICv3 redistributor provisioning with ACPI - KConfig cleanup for C-SKY | 08 February 2020, 14:54:03 UTC |
29ca3b3 | Tim Harvey | 07 February 2020, 20:40:26 UTC | net: thunderx: use proper interface type for RGMII The configuration of the OCTEONTX XCV_DLL_CTL register via xcv_init_hw() is such that the RGMII RX delay is bypassed leaving the RGMII TX delay enabled in the MAC: /* Configure DLL - enable or bypass * TX no bypass, RX bypass */ cfg = readq_relaxed(xcv->reg_base + XCV_DLL_CTL); cfg &= ~0xFF03; cfg |= CLKRX_BYP; writeq_relaxed(cfg, xcv->reg_base + XCV_DLL_CTL); This would coorespond to a interface type of PHY_INTERFACE_MODE_RGMII_RXID and not PHY_INTERFACE_MODE_RGMII. Fixing this allows RGMII PHY drivers to do the right thing (enable RX delay in the PHY) instead of erroneously enabling both delays in the PHY. Signed-off-by: Tim Harvey <tharvey@gateworks.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net> | 08 February 2020, 14:28:09 UTC |
c76b305 | David S. Miller | 08 February 2020, 14:03:11 UTC | Merge tag 'wireless-drivers-2020-02-08' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers Kalle Valo says: ==================== wireless-drivers fixes for v5.6 First set of fixes for v5.6. Buffer overflow fixes to mwifiex, quite a few functionality fixes to iwlwifi and smaller fixes to other drivers. mwifiex * fix an unlock from a previous security fix * fix two buffer overflows libertas * fix two bugs from previous security fixes iwlwifi * fix module removal with multiple NICs * don't treat IGTK removal failure as an error * avoid FW crashes due to DTS measurement races * fix a potential use after free in FTM code * prevent a NULL pointer dereference in iwl_mvm_cfg_he_sta() * fix TDLS discovery * check all CPUs when trying to detect an error during resume rtw88 * fix clang warning mt76 * fix reading of max_nss value from a register ==================== Signed-off-by: David S. Miller <davem@davemloft.net> | 08 February 2020, 14:03:11 UTC |
2696e11 | David S. Miller | 08 February 2020, 14:01:03 UTC | Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf Daniel Borkmann says: ==================== pull-request: bpf 2020-02-07 The following pull-request contains BPF updates for your *net* tree. We've added 15 non-merge commits during the last 10 day(s) which contain a total of 12 files changed, 114 insertions(+), 31 deletions(-). The main changes are: 1) Various BPF sockmap fixes related to RCU handling in the map's tear- down code, from Jakub Sitnicki. 2) Fix macro state explosion in BPF sk_storage map when calculating its bucket_log on allocation, from Martin KaFai Lau. 3) Fix potential BPF sockmap update race by rechecking socket's established state under lock, from Lorenz Bauer. 4) Fix crash in bpftool on missing xlated instructions when kptr_restrict sysctl is set, from Toke Høiland-Jørgensen. 5) Fix i40e's XSK wakeup code to return proper error in busy state and various misc fixes in xdpsock BPF sample code, from Maciej Fijalkowski. 6) Fix the way modifiers are skipped in BTF in the verifier while walking pointers to avoid program rejection, from Alexei Starovoitov. 7) Fix Makefile for runqslower BPF tool to i) rebuild on libbpf changes and ii) to fix undefined reference linker errors for older gcc version due to order of passed gcc parameters, from Yulia Kartseva and Song Liu. 8) Fix a trampoline_count BPF kselftest warning about missing braces around initializer, from Andrii Nakryiko. 9) Fix up redundant "HAVE" prefix from large INSN limit kernel probe in bpftool, from Michal Rostecki. ==================== Signed-off-by: David S. Miller <davem@davemloft.net> | 08 February 2020, 14:01:03 UTC |
d4bf905 | Christophe Leroy | 07 February 2020, 17:20:57 UTC | powerpc: Fix CONFIG_TRACE_IRQFLAGS with CONFIG_VMAP_STACK When CONFIG_PROVE_LOCKING is selected together with (now default) CONFIG_VMAP_STACK, kernel enter deadlock during boot. At the point of checking whether interrupts are enabled or not, the value of MSR saved on stack is read using the physical address of the stack. But at this point, when using VMAP stack the DATA MMU translation has already been re-enabled, leading to deadlock. Don't use the physical address of the stack when CONFIG_VMAP_STACK is set. Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Reported-by: Guenter Roeck <linux@roeck-us.net> Fixes: 028474876f47 ("powerpc/32: prepare for CONFIG_VMAP_STACK") Tested-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/daeacdc0dec0416d1c587cc9f9e7191ad3068dc0.1581095957.git.christophe.leroy@c-s.fr | 08 February 2020, 10:49:06 UTC |
9dc086f | Michael Ellerman | 07 February 2020, 11:15:46 UTC | powerpc/futex: Fix incorrect user access blocking The early versions of our kernel user access prevention (KUAP) were written by Russell and Christophe, and didn't have separate read/write access. At some point I picked up the series and added the read/write access, but I failed to update the usages in futex.h to correctly allow read and write. However we didn't notice because of another bug which was causing the low-level code to always enable read and write. That bug was fixed recently in commit 1d8f739b07bd ("powerpc/kuap: Fix set direction in allow/prevent_user_access()"). futex_atomic_cmpxchg_inatomic() is passed the user address as %3 and does: 1: lwarx %1, 0, %3 cmpw 0, %1, %4 bne- 3f 2: stwcx. %5, 0, %3 Which clearly loads and stores from/to %3. The logic in arch_futex_atomic_op_inuser() is similar, so fix both of them to use allow_read_write_user(). Without this fix, and with PPC_KUAP_DEBUG=y, we see eg: Bug: Read fault blocked by AMR! WARNING: CPU: 94 PID: 149215 at arch/powerpc/include/asm/book3s/64/kup-radix.h:126 __do_page_fault+0x600/0xf30 CPU: 94 PID: 149215 Comm: futex_requeue_p Tainted: G W 5.5.0-rc7-gcc9x-g4c25df5640ae #1 ... NIP [c000000000070680] __do_page_fault+0x600/0xf30 LR [c00000000007067c] __do_page_fault+0x5fc/0xf30 Call Trace: [c00020138e5637e0] [c00000000007067c] __do_page_fault+0x5fc/0xf30 (unreliable) [c00020138e5638c0] [c00000000000ada8] handle_page_fault+0x10/0x30 --- interrupt: 301 at cmpxchg_futex_value_locked+0x68/0xd0 LR = futex_lock_pi_atomic+0xe0/0x1f0 [c00020138e563bc0] [c000000000217b50] futex_lock_pi_atomic+0x80/0x1f0 (unreliable) [c00020138e563c30] [c00000000021b668] futex_requeue+0x438/0xb60 [c00020138e563d60] [c00000000021c6cc] do_futex+0x1ec/0x2b0 [c00020138e563d90] [c00000000021c8b8] sys_futex+0x128/0x200 [c00020138e563e20] [c00000000000b7ac] system_call+0x5c/0x68 Fixes: de78a9c42a79 ("powerpc: Add a framework for Kernel Userspace Access Protection") Cc: stable@vger.kernel.org # v5.2+ Reported-by: syzbot+e808452bad7c375cbee6@syzkaller-ppc64.appspotmail.com Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Reviewed-by: Christophe Leroy <christophe.leroy@c-s.fr> Link: https://lore.kernel.org/r/20200207122145.11928-1-mpe@ellerman.id.au | 08 February 2020, 10:48:39 UTC |
5186a6c | Zenghui Yu | 06 February 2020, 07:57:11 UTC | irqchip/gic-v3-its: Rename VPENDBASER/VPROPBASER accessors V{PEND,PROP}BASER registers are actually located in VLPI_base frame of the *redistributor*. Rename their accessors to reflect this fact. No functional changes. Signed-off-by: Zenghui Yu <yuzenghui@huawei.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20200206075711.1275-7-yuzenghui@huawei.com | 08 February 2020, 10:01:33 UTC |
b463532 | Zenghui Yu | 06 February 2020, 07:57:10 UTC | irqchip/gic-v3-its: Remove superfluous WARN_ON "ITS virtual pending table not cleaning" is already complained inside its_clear_vpend_valid(), there's no need to trigger a WARN_ON again. Signed-off-by: Zenghui Yu <yuzenghui@huawei.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20200206075711.1275-6-yuzenghui@huawei.com | 08 February 2020, 10:01:33 UTC |
4bccf1d | Zenghui Yu | 06 February 2020, 07:57:09 UTC | irqchip/gic-v4.1: Drop 'tmp' in inherit_vpe_l1_table_from_rd() The variable 'tmp' in inherit_vpe_l1_table_from_rd() is actually not needed, drop it. Signed-off-by: Zenghui Yu <yuzenghui@huawei.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20200206075711.1275-5-yuzenghui@huawei.com | 08 February 2020, 10:01:33 UTC |
4e6437f | Zenghui Yu | 06 February 2020, 07:57:08 UTC | irqchip/gic-v4.1: Ensure L2 vPE table is allocated at RD level In GICv4, we will ensure that level2 vPE table memory is allocated for the specified vpe_id on all v4 ITS, in its_alloc_vpe_table(). This still works well for the typical GICv4.1 implementation, where the new vPE table is shared between the ITSs and the RDs. To make it explicit, let us introduce allocate_vpe_l2_table() to make sure that the L2 tables are allocated on all v4.1 RDs. We're likely not need to allocate memory in it because the vPE table is shared and (L2 table is) already allocated at ITS level, except for the case where the ITS doesn't share anything (say SVPET == 0, practically unlikely but architecturally allowed). The implementation of allocate_vpe_l2_table() is mostly copied from its_alloc_table_entry(). Signed-off-by: Zenghui Yu <yuzenghui@huawei.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20200206075711.1275-4-yuzenghui@huawei.com | 08 February 2020, 10:01:33 UTC |
8b718d4 | Zenghui Yu | 06 February 2020, 07:57:07 UTC | irqchip/gic-v4.1: Set vpe_l1_base for all redistributors Currently, we will not set vpe_l1_page for the current RD if we can inherit the vPE configuration table from another RD (or ITS), which results in an inconsistency between RDs within the same CommonLPIAff group. Let's rename it to vpe_l1_base to indicate the base address of the vPE configuration table of this RD, and set it properly for *all* v4.1 redistributors. Signed-off-by: Zenghui Yu <yuzenghui@huawei.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20200206075711.1275-3-yuzenghui@huawei.com | 08 February 2020, 10:01:33 UTC |
e88bd31 | Zenghui Yu | 06 February 2020, 07:57:06 UTC | irqchip/gic-v4.1: Fix programming of GICR_VPROPBASER_4_1_SIZE The Size field of GICv4.1 VPROPBASER register indicates number of pages minus one and together Page_Size and Size control the vPEID width. Let's respect this requirement of the architecture. Signed-off-by: Zenghui Yu <yuzenghui@huawei.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20200206075711.1275-2-yuzenghui@huawei.com | 08 February 2020, 10:01:33 UTC |
d08f301 | Lorenzo Bianconi | 07 February 2020, 10:29:51 UTC | mt76: mt7615: fix max_nss in mt7615_eeprom_parse_hw_cap Fix u8 cast reading max_nss from MT_TOP_STRAP_STA register in mt7615_eeprom_parse_hw_cap routine Fixes: acf5457fd99db ("mt76: mt7615: read {tx,rx} mask from eeprom") Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> | 08 February 2020, 09:59:03 UTC |
f757165 | Linus Torvalds | 08 February 2020, 01:59:07 UTC | Merge tag 'fuse-fixes-5.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse Pull fuse fixes from Miklos Szeredi: - Fix a regression introduced in v5.1 that triggers WARNINGs for some fuse filesystems - Fix an xfstest failure - Allow overlayfs to be used on top of fuse/virtiofs - Code and documentation cleanups * tag 'fuse-fixes-5.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse: fuse: use true,false for bool variable Documentation: filesystems: convert fuse to RST fuse: Support RENAME_WHITEOUT flag fuse: don't overflow LLONG_MAX with end offset fix up iter on short count in fuse_direct_io() | 08 February 2020, 01:59:07 UTC |
175787e | Linus Torvalds | 08 February 2020, 01:54:46 UTC | Merge tag 'gfs2-for-5.6-2' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2 Pull gfs2 fixes from Andreas Gruenbacher: - Fix a bug in Abhi Das's journal head lookup improvements that can cause a valid journal to be rejected. - Fix an O_SYNC write handling bug reported by Christoph Hellwig. * tag 'gfs2-for-5.6-2' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2: gfs2: fix O_SYNC write handling gfs2: move setting current->backing_dev_info gfs2: fix gfs2_find_jhead that returns uninitialized jhead with seq 0 | 08 February 2020, 01:54:46 UTC |
60ea27e | Linus Torvalds | 08 February 2020, 01:52:38 UTC | Merge tag 'for-linus-5.6-ofs1' of git://git.kernel.org/pub/scm/linux/kernel/git/hubcap/linux Pull orangefs fix from Mike Marshall: "Debugfs fix for orangefs. Vasliy Averin noticed that 'if seq_file .next function does not change position index, read after some lseek can generate unexpected output' and sent in this fix" * tag 'for-linus-5.6-ofs1' of git://git.kernel.org/pub/scm/linux/kernel/git/hubcap/linux: help_next should increase position index | 08 February 2020, 01:52:38 UTC |
08dffcc | Linus Torvalds | 08 February 2020, 01:50:21 UTC | Merge tag 'nfsd-5.6' of git://linux-nfs.org/~bfields/linux Pull nfsd updates from Bruce Fields: "Highlights: - Server-to-server copy code from Olga. To use it, client and both servers must have support, the target server must be able to access the source server over NFSv4.2, and the target server must have the inter_copy_offload_enable module parameter set. - Improvements and bugfixes for the new filehandle cache, especially in the container case, from Trond - Also from Trond, better reporting of write errors. - Y2038 work from Arnd" * tag 'nfsd-5.6' of git://linux-nfs.org/~bfields/linux: (55 commits) sunrpc: expiry_time should be seconds not timeval nfsd: make nfsd_filecache_wq variable static nfsd4: fix double free in nfsd4_do_async_copy() nfsd: convert file cache to use over/underflow safe refcount nfsd: Define the file access mode enum for tracing nfsd: Fix a perf warning nfsd: Ensure sampling of the write verifier is atomic with the write nfsd: Ensure sampling of the commit verifier is atomic with the commit sunrpc: clean up cache entry add/remove from hashtable sunrpc: Fix potential leaks in sunrpc_cache_unhash() nfsd: Ensure exclusion between CLONE and WRITE errors nfsd: Pass the nfsd_file as arguments to nfsd4_clone_file_range() nfsd: Update the boot verifier on stable writes too. nfsd: Fix stable writes nfsd: Allow nfsd_vfs_write() to take the nfsd_file as an argument nfsd: Fix a soft lockup race in nfsd_file_mark_find_or_create() nfsd: Reduce the number of calls to nfsd_file_gc() nfsd: Schedule the laundrette regularly irrespective of file errors nfsd: Remove unused constant NFSD_FILE_LRU_RESCAN nfsd: Containerise filecache laundrette ... | 08 February 2020, 01:50:21 UTC |
f43574d | Linus Torvalds | 08 February 2020, 01:39:56 UTC | Merge tag 'nfs-for-5.6-1' of git://git.linux-nfs.org/projects/anna/linux-nfs Puyll NFS client updates from Anna Schumaker: "Stable bugfixes: - Fix memory leaks and corruption in readdir # v2.6.37+ - Directory page cache needs to be locked when read # v2.6.37+ New features: - Convert NFS to use the new mount API - Add "softreval" mount option to let clients use cache if server goes down - Add a config option to compile without UDP support - Limit the number of inactive delegations the client can cache at once - Improved readdir concurrency using iterate_shared() Other bugfixes and cleanups: - More 64-bit time conversions - Add additional diagnostic tracepoints - Check for holes in swapfiles, and add dependency on CONFIG_SWAP - Various xprtrdma cleanups to prepare for 5.7's changes - Several fixes for NFS writeback and commit handling - Fix acls over krb5i/krb5p mounts - Recover from premature loss of openstateids - Fix NFS v3 chacl and chmod bug - Compare creds using cred_fscmp() - Use kmemdup_nul() in more places - Optimize readdir cache page invalidation - Lease renewal and recovery fixes" * tag 'nfs-for-5.6-1' of git://git.linux-nfs.org/projects/anna/linux-nfs: (93 commits) NFSv4.0: nfs4_do_fsinfo() should not do implicit lease renewals NFSv4: try lease recovery on NFS4ERR_EXPIRED NFS: Fix memory leaks nfs: optimise readdir cache page invalidation NFS: Switch readdir to using iterate_shared() NFS: Use kmemdup_nul() in nfs_readdir_make_qstr() NFS: Directory page cache pages need to be locked when read NFS: Fix memory leaks and corruption in readdir SUNRPC: Use kmemdup_nul() in rpc_parse_scope_id() NFS: Replace various occurrences of kstrndup() with kmemdup_nul() NFSv4: Limit the total number of cached delegations NFSv4: Add accounting for the number of active delegations held NFSv4: Try to return the delegation immediately when marked for return on close NFS: Clear NFS_DELEGATION_RETURN_IF_CLOSED when the delegation is returned NFSv4: nfs_inode_evict_delegation() should set NFS_DELEGATION_RETURNING NFS: nfs_find_open_context() should use cred_fscmp() NFS: nfs_access_get_cached_rcu() should use cred_fscmp() NFSv4: pnfs_roc() must use cred_fscmp() to compare creds NFS: remove unused macros nfs: Return EINVAL rather than ERANGE for mount parse errors ... | 08 February 2020, 01:39:56 UTC |
88d6f13 | Martin KaFai Lau | 07 February 2020, 08:18:10 UTC | bpf: Improve bucket_log calculation logic It was reported that the max_t, ilog2, and roundup_pow_of_two macros have exponential effects on the number of states in the sparse checker. This patch breaks them up by calculating the "nbuckets" first so that the "bucket_log" only needs to take ilog2(). In addition, Linus mentioned: Patch looks good, but I'd like to point out that it's not just sparse. You can see it with a simple make net/core/bpf_sk_storage.i grep 'smap->bucket_log = ' net/core/bpf_sk_storage.i | wc and see the end result: 1 365071 2686974 That's one line (the assignment line) that is 2,686,974 characters in length. Now, sparse does happen to react particularly badly to that (I didn't look to why, but I suspect it's just that evaluating all the types that don't actually ever end up getting used ends up being much more expensive than it should be), but I bet it's not good for gcc either. Fixes: 6ac99e8f23d4 ("bpf: Introduce bpf sk local storage") Reported-by: Randy Dunlap <rdunlap@infradead.org> Reported-by: Luc Van Oostenryck <luc.vanoostenryck@gmail.com> Suggested-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Martin KaFai Lau <kafai@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Reviewed-by: Luc Van Oostenryck <luc.vanoostenryck@gmail.com> Link: https://lore.kernel.org/bpf/20200207081810.3918919-1-kafai@fb.com | 07 February 2020, 22:01:41 UTC |
5d3919a | Jakub Sitnicki | 06 February 2020, 11:16:52 UTC | selftests/bpf: Test freeing sockmap/sockhash with a socket in it Commit 7e81a3530206 ("bpf: Sockmap, ensure sock lock held during tear down") introduced sleeping issues inside RCU critical sections and while holding a spinlock on sockmap/sockhash tear-down. There has to be at least one socket in the map for the problem to surface. This adds a test that triggers the warnings for broken locking rules. Not a fix per se, but rather tooling to verify the accompanying fixes. Run on a VM with 1 vCPU to reproduce the warnings. Fixes: 7e81a3530206 ("bpf: Sockmap, ensure sock lock held during tear down") Signed-off-by: Jakub Sitnicki <jakub@cloudflare.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: John Fastabend <john.fastabend@gmail.com> Link: https://lore.kernel.org/bpf/20200206111652.694507-4-jakub@cloudflare.com | 07 February 2020, 21:36:26 UTC |
0b2dc83 | Jakub Sitnicki | 06 February 2020, 11:16:51 UTC | bpf, sockhash: Synchronize_rcu before free'ing map We need to have a synchronize_rcu before free'ing the sockhash because any outstanding psock references will have a pointer to the map and when they use it, this could trigger a use after free. This is a sister fix for sockhash, following commit 2bb90e5cc90e ("bpf: sockmap, synchronize_rcu before free'ing map") which addressed sockmap, which comes from a manual audit. Fixes: 604326b41a6fb ("bpf, sockmap: convert to generic sk_msg interface") Signed-off-by: Jakub Sitnicki <jakub@cloudflare.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: John Fastabend <john.fastabend@gmail.com> Link: https://lore.kernel.org/bpf/20200206111652.694507-3-jakub@cloudflare.com | 07 February 2020, 21:36:26 UTC |
db6a501 | Jakub Sitnicki | 06 February 2020, 11:16:50 UTC | bpf, sockmap: Don't sleep while holding RCU lock on tear-down rcu_read_lock is needed to protect access to psock inside sock_map_unref when tearing down the map. However, we can't afford to sleep in lock_sock while in RCU read-side critical section. Grab the RCU lock only after we have locked the socket. This fixes RCU warnings triggerable on a VM with 1 vCPU when free'ing a sockmap/sockhash that contains at least one socket: | ============================= | WARNING: suspicious RCU usage | 5.5.0-04005-g8fc91b972b73 #450 Not tainted | ----------------------------- | include/linux/rcupdate.h:272 Illegal context switch in RCU read-side critical section! | | other info that might help us debug this: | | | rcu_scheduler_active = 2, debug_locks = 1 | 4 locks held by kworker/0:1/62: | #0: ffff88813b019748 ((wq_completion)events){+.+.}, at: process_one_work+0x1d7/0x5e0 | #1: ffffc900000abe50 ((work_completion)(&map->work)){+.+.}, at: process_one_work+0x1d7/0x5e0 | #2: ffffffff82065d20 (rcu_read_lock){....}, at: sock_map_free+0x5/0x170 | #3: ffff8881368c5df8 (&stab->lock){+...}, at: sock_map_free+0x64/0x170 | | stack backtrace: | CPU: 0 PID: 62 Comm: kworker/0:1 Not tainted 5.5.0-04005-g8fc91b972b73 #450 | Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS ?-20190727_073836-buildvm-ppc64le-16.ppc.fedoraproject.org-3.fc31 04/01/2014 | Workqueue: events bpf_map_free_deferred | Call Trace: | dump_stack+0x71/0xa0 | ___might_sleep+0x105/0x190 | lock_sock_nested+0x28/0x90 | sock_map_free+0x95/0x170 | bpf_map_free_deferred+0x58/0x80 | process_one_work+0x260/0x5e0 | worker_thread+0x4d/0x3e0 | kthread+0x108/0x140 | ? process_one_work+0x5e0/0x5e0 | ? kthread_park+0x90/0x90 | ret_from_fork+0x3a/0x50 | ============================= | WARNING: suspicious RCU usage | 5.5.0-04005-g8fc91b972b73-dirty #452 Not tainted | ----------------------------- | include/linux/rcupdate.h:272 Illegal context switch in RCU read-side critical section! | | other info that might help us debug this: | | | rcu_scheduler_active = 2, debug_locks = 1 | 4 locks held by kworker/0:1/62: | #0: ffff88813b019748 ((wq_completion)events){+.+.}, at: process_one_work+0x1d7/0x5e0 | #1: ffffc900000abe50 ((work_completion)(&map->work)){+.+.}, at: process_one_work+0x1d7/0x5e0 | #2: ffffffff82065d20 (rcu_read_lock){....}, at: sock_hash_free+0x5/0x1d0 | #3: ffff888139966e00 (&htab->buckets[i].lock){+...}, at: sock_hash_free+0x92/0x1d0 | | stack backtrace: | CPU: 0 PID: 62 Comm: kworker/0:1 Not tainted 5.5.0-04005-g8fc91b972b73-dirty #452 | Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS ?-20190727_073836-buildvm-ppc64le-16.ppc.fedoraproject.org-3.fc31 04/01/2014 | Workqueue: events bpf_map_free_deferred | Call Trace: | dump_stack+0x71/0xa0 | ___might_sleep+0x105/0x190 | lock_sock_nested+0x28/0x90 | sock_hash_free+0xec/0x1d0 | bpf_map_free_deferred+0x58/0x80 | process_one_work+0x260/0x5e0 | worker_thread+0x4d/0x3e0 | kthread+0x108/0x140 | ? process_one_work+0x5e0/0x5e0 | ? kthread_park+0x90/0x90 | ret_from_fork+0x3a/0x50 Fixes: 7e81a3530206 ("bpf: Sockmap, ensure sock lock held during tear down") Signed-off-by: Jakub Sitnicki <jakub@cloudflare.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: John Fastabend <john.fastabend@gmail.com> Link: https://lore.kernel.org/bpf/20200206111652.694507-2-jakub@cloudflare.com | 07 February 2020, 21:36:26 UTC |
d95f1e8 | Toke Høiland-Jørgensen | 06 February 2020, 10:29:06 UTC | bpftool: Don't crash on missing xlated program instructions Turns out the xlated program instructions can also be missing if kptr_restrict sysctl is set. This means that the previous fix to check the jited_prog_insns pointer was insufficient; add another check of the xlated_prog_insns pointer as well. Fixes: 5b79bcdf0362 ("bpftool: Don't crash on missing jited insns or ksyms") Fixes: cae73f233923 ("bpftool: use bpf_program__get_prog_info_linear() in prog.c:do_dump()") Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Reviewed-by: Quentin Monnet <quentin@isovalent.com> Link: https://lore.kernel.org/bpf/20200206102906.112551-1-toke@redhat.com | 07 February 2020, 21:29:45 UTC |
85b8ac0 | Lorenz Bauer | 07 February 2020, 10:37:12 UTC | bpf, sockmap: Check update requirements after locking It's currently possible to insert sockets in unexpected states into a sockmap, due to a TOCTTOU when updating the map from a syscall. sock_map_update_elem checks that sk->sk_state == TCP_ESTABLISHED, locks the socket and then calls sock_map_update_common. At this point, the socket may have transitioned into another state, and the earlier assumptions don't hold anymore. Crucially, it's conceivable (though very unlikely) that a socket has become unhashed. This breaks the sockmap's assumption that it will get a callback via sk->sk_prot->unhash. Fix this by checking the (fixed) sk_type and sk_protocol without the lock, followed by a locked check of sk_state. Unfortunately it's not possible to push the check down into sock_(map|hash)_update_common, since BPF_SOCK_OPS_PASSIVE_ESTABLISHED_CB run before the socket has transitioned from TCP_SYN_RECV into TCP_ESTABLISHED. Fixes: 604326b41a6f ("bpf, sockmap: convert to generic sk_msg interface") Signed-off-by: Lorenz Bauer <lmb@cloudflare.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Reviewed-by: Jakub Sitnicki <jakub@cloudflare.com> Link: https://lore.kernel.org/bpf/20200207103713.28175-1-lmb@cloudflare.com | 07 February 2020, 21:28:04 UTC |
41dcd67 | Linus Torvalds | 07 February 2020, 21:03:10 UTC | Merge tag 'docs-5.6-2' of git://git.lwn.net/linux Pull Documentation fixes from Jonathan Corbet: "A handful of small documentation fixes that wandered in" * tag 'docs-5.6-2' of git://git.lwn.net/linux: Allow git builds of Sphinx Documentation: changes.rst: update several outdated project URLs Documentation: build warnings related to missing blank lines after explicit markups has been fixed mailmap: add entry for Tiezhu Yang Documentation/ko_KR/howto: Update a broken link Documentation/ko_KR/howto: Update broken web addresses docs/locking: Fix outdated section names | 07 February 2020, 21:03:10 UTC |
11777ee | Linus Torvalds | 07 February 2020, 20:54:13 UTC | Merge branch 'i2c/for-5.6' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux Pull i2c updates from Wolfram Sang: "i2c core: - huge improvements and refactorizations of the Linux I2C documentation (lots of thanks to Luca for doing it and Jean for the careful review) - subsystem wide API conversion to i2c_new_client_device() - remove obsolete parport-light driver - smaller core updates (removal of 'extern', enabling more compile testing, use more helper macros) - and quite a bunch of driver updates (new IDs, simplifications, better PM, support of atomic transfers and other improvements) i2c-mux: - The main feature is the idle-state rework of the pca954x driver from Biwen Li at24 driver: - minor maintenance: update the license tag, sort headers - move support for the write-protect pin into nvmem core - add a reference to the new wp-gpios property in nvmem to at25 bindings - add support for regulator and pm_runtime control" * 'i2c/for-5.6' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (91 commits) i2c: cros-ec-tunnel: Fix ACPI identifier i2c: cros-ec-tunnel: Fix slave device enumeration i2c: stm32f7: add PM_SLEEP suspend/resume support i2c: cadence: Fix wording in i2c-cadence driver i2c: cadence: Fix power management order of operations i2c: cadence: Fix error printing in case of defer i2c: cadence: Handle transfer_size rollover i2c: i801: Add support for Intel Comet Lake PCH-V docs: i2c: writing-clients: properly name the stop condition docs: i2c: i2c-protocol: use same wording as smbus-protocol docs: i2c: rename sections so the overall picture is clearer docs: i2c: old-module-parameters: use monospace instead of "" docs: i2c: old-module-parameters: clarify this is for obsolete kernels docs: i2c: old-module-parameters: fix internal hyperlink docs: i2c: instantiating-devices: use monospace for sysfs attributes docs: i2c: instantiating-devices: rearrange static instatiation docs: i2c: instantiating-devices: fix internal hyperlink docs: i2c: smbus-protocol: improve I2C Block transactions description docs: i2c: smbus-protocol: fix punctuation docs: i2c: smbus-protocol: fix typo ... | 07 February 2020, 20:54:13 UTC |
ed39ba0 | Linus Torvalds | 07 February 2020, 20:51:54 UTC | Merge tag 'acpi-5.6-rc1-3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull more ACPI updates from Rafael Wysocki: "Add Hisilicon Hip08-Lite I2C controller clock frequency support to the ACPI driver for AMD SoCs (APD) and to the Designware I2C driver (Hanjun Guo)" * tag 'acpi-5.6-rc1-3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: i2c: designware: Add ACPI HID for Hisilicon Hip08-Lite I2C controller ACPI / APD: Add clock frequency for Hisilicon Hip08-Lite I2C controller | 07 February 2020, 20:51:54 UTC |
ba7dcfc | Linus Torvalds | 07 February 2020, 20:49:10 UTC | Merge tag 'pm-5.6-rc1-3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull more power management updates from Rafael Wysocki: - Update the recently merged CPR (Core Power Reduction) support in the AVS (Adaptive Voltage Scaling) subsystem (Brendan Higgins, Nathan Chancellor, Niklas Cassel) - Update the rockchip-io AVS driver (Heiko Stuebner) - Add two more module parameters to intel_idle on top of the recently merged material (Rafael Wysocki) - Clean up a piece of cpuidle documentation and consolidate system sleep states documentation (Rafael Wysocki) * tag 'pm-5.6-rc1-3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: cpuidle: Documentation: Clean up PM QoS description Documentation: admin-guide: PM: Update sleep states documentation intel_idle: Introduce 'states_off' module parameter intel_idle: Introduce 'use_acpi' module parameter power: avs: qcom-cpr: Avoid clang -Wsometimes-uninitialized in cpr_scale power: avs: qcom-cpr: add unspecified HAS_IOMEM dependency PM / AVS: rockchip-io: fix the supply naming for the emmc supply on px30 power: avs: qcom-cpr: add a printout after the driver has been initialized | 07 February 2020, 20:49:10 UTC |
c16b99d | Linus Torvalds | 07 February 2020, 20:46:08 UTC | Merge tag 'drm-next-2020-02-07' of git://anongit.freedesktop.org/drm/drm Pull drm fixes from Dave Airlie: "Just some fixes for this merge window: the tegra changes fix some regressions in the merge, nouveau has a few modesetting fixes. The amdgpu fixes are bit bigger, but they contain a couple of weeks of fixes, and don't seem to contain anything that isn't really a fix. Summary: tegra: - merge window regression fixes nouveau: - couple of volta/turing modesetting fixes amdgpu: - EDC fixes for Arcturus - GDDR6 memory training fixe - Fix for reading gfx clockgating registers while in GFXOFF state - i2c freq fixes - Misc display fixes - TLB invalidation fix when using semaphores - VCN 2.5 instancing fixes - Switch raven1 gfxoff to a blacklist - Coreboot workaround for KV/KB - Root cause dongle fixes for display and revert workaround - Enable GPU reset for renoir and navi - Navi overclocking fixes - Fix up confusing warnings in display clock validation on raven amdkfd: - SDMA fix radeon: - Misc LUT fixes" * tag 'drm-next-2020-02-07' of git://anongit.freedesktop.org/drm/drm: (90 commits) gpu: host1x: Set DMA direction only for DMA-mapped buffer objects drm/tegra: Reuse IOVA mapping where possible drm/tegra: Relax IOMMU usage criteria on old Tegra drm/amd/dm/mst: Ignore payload update failures drm/amdgpu: update default voltage for boot od table for navi1x drm/amdgpu/smu10: fix smu10_get_clock_by_type_with_voltage drm/amdgpu/smu10: fix smu10_get_clock_by_type_with_latency drm/amdgpu/display: handle multiple numbers of fclks in dcn_calcs.c (v2) drm/amdgpu: fetch default VDDC curve voltages (v2) drm/amdgpu/smu_v11_0: Correct behavior of restoring default tables (v2) drm/amdgpu/navi10: add OD_RANGE for navi overclocking drm/amdgpu/navi: fix index for OD MCLK drm/amd/display: Fix HW/SW state mismatch drm/amd/display: Fix a typo when computing dsc configuration drm/amd/powerplay: fix navi10 system intermittent reboot issue V2 drm/amdkfd: Fix a bug in SDMA RLC queue counting under HWS mode drm/amd/display: Only enable cursor on pipes that need it drm/nouveau/kms/gv100-: avoid sending a core update until the first modeset drm/nouveau/kms/gv100-: move window ownership setup into modesetting path drm/nouveau/disp/gv100-: halt NV_PDISP_FE_RM_INTR_STAT_CTRL_DISP_ERROR storms ... | 07 February 2020, 20:46:08 UTC |
8bf5973 | Linus Torvalds | 07 February 2020, 20:40:50 UTC | Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux Pull clk fixes from Stephen Boyd: "A collection of fixes: - Make of_clk.h self contained - Fix new qcom DT bindings that just merged to match the DTS files - Fix qcom clk driver to properly detect DFS clk frequencies - Fix the ls1028a driver to not deref a pointer before assigning it" * tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: of: clk: Make <linux/of_clk.h> self-contained clk: qcom: Use ARRAY_SIZE in videocc-sc7180 for parent clocks clk: qcom: Get rid of the test clock for videocc-sc7180 dt-bindings: clock: Cleanup qcom,videocc bindings for sdm845/sc7180 clk: qcom: Use ARRAY_SIZE in gpucc-sc7180 for parent clocks clk: qcom: Get rid of the test clock for gpucc-sc7180 dt-bindings: clock: Fix qcom,gpucc bindings for sdm845/sc7180/msm8998 clk: qcom: Use ARRAY_SIZE in dispcc-sc7180 for parent clocks clk: qcom: Get rid of the test clock for dispcc-sc7180 clk: qcom: Get rid of fallback global names for dispcc-sc7180 dt-bindings: clock: Fix qcom,dispcc bindings for sdm845/sc7180 clk: qcom: rcg2: Don't crash if our parent can't be found; return an error clk: ls1028a: fix a dereference of pointer 'parent' before a null check dt-bindings: clk: qcom: Fix self-validation, split, and clean cruft clk: qcom: Don't overwrite 'cfg' in clk_rcg2_dfs_populate_freq() | 07 February 2020, 20:40:50 UTC |
f9f21ce | Stephen Boyd | 06 February 2020, 19:15:21 UTC | genirq: Clarify that irq wake state is orthogonal to enable/disable There's some confusion around if an irq that's disabled with disable_irq() can still wake the system from sleep states such as "suspend to RAM". Clarify this in the kernel documentation for irq_set_irq_wake() so that it's clear that an irq can be disabled and still wake the system if it has been marked for wakeup. Signed-off-by: Stephen Boyd <swboyd@chromium.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Douglas Anderson <dianders@chromium.org> Link: https://lkml.kernel.org/r/20200206191521.94559-1-swboyd@chromium.org | 07 February 2020, 20:37:08 UTC |
b34f01f | Linus Torvalds | 07 February 2020, 20:30:16 UTC | Merge tag 'linux-watchdog-5.6-rc1' of git://www.linux-watchdog.org/linux-watchdog Pull watchdog updates from Wim Van Sebroeck: - add IT8786 chipset ID - addition of sam9x60 compatible watchdog - da9062 improvements - fix UAF in reboot notifier handling in watchdog core code - other fixes and small improvements * tag 'linux-watchdog-5.6-rc1' of git://www.linux-watchdog.org/linux-watchdog: watchdog: da9062: make restart handler atomic safe watchdog: mtk_wdt: mt2712: Add reset controller watchdog: mtk_wdt: mt8183: Add reset controller dt-bindings: mediatek: mt2712: Add #reset-cells dt-bindings: mediatek: mt8183: Add #reset-cells dt-bindings: watchdog: da9062: add suspend disable option watchdog: it87_wdt: add IT8786 ID watchdog: dw_wdt: ping watchdog to reset countdown before start watchdog: fix UAF in reboot notifier handling in watchdog core code watchdog: cadence: Skip printing pointer value watchdog: qcom: Use platform_get_irq_optional() for bark irq watchdog: da9062: add power management ops watchdog: make DesignWare watchdog allow users to set bigger timeout value drivers: watchdog: stm32_iwdg: set WDOG_HW_RUNNING at probe watchdog: sama5d4_wdt: addition of sam9x60 compatible watchdog | 07 February 2020, 20:30:16 UTC |
e0f121c | Linus Torvalds | 07 February 2020, 20:26:34 UTC | Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost Pull virtio updates from Michael Tsirkin: "Some bug fixes/cleanups. The deprecated scsi passthrough for virtio_blk is removed" * tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: virtio_balloon: Fix memory leaks on errors in virtballoon_probe() virtio-balloon: Fix memory leak when unloading while hinting is in progress virtio_balloon: prevent pfn array overflow virtio-blk: remove VIRTIO_BLK_F_SCSI support virtio-pci: check name when counting MSI-X vectors virtio-balloon: initialize all vq callbacks virtio-mmio: convert to devm_platform_ioremap_resource | 07 February 2020, 20:26:34 UTC |
9b7fa28 | Linus Torvalds | 07 February 2020, 20:22:29 UTC | Merge tag 'xtensa-20200206' of git://github.com/jcmvbkbc/linux-xtensa Pull xtensa updates from Max Filippov: - reorganize exception vectors placement - small cleanups (drop unused functions/headers/defconfig entries, spelling fixes) * tag 'xtensa-20200206' of git://github.com/jcmvbkbc/linux-xtensa: xtensa: ISS: improve simcall assembly xtensa: reorganize vectors placement xtensa: separate SMP and XIP support xtensa: move fast exception handlers close to vectors arch/xtensa: fix Kconfig typos for HAVE_SMP xtensa: clean up optional XCHAL_* definitions xtensa: drop unused function fast_coprocessor_double xtensa: drop empty platform_* functions from platforms xtensa: clean up platform headers xtensa: drop set_except_vector declaration xtensa: configs: Cleanup old Kconfig IO scheduler options | 07 February 2020, 20:22:29 UTC |
f35aa2b | Al Viro | 22 December 2019, 02:35:55 UTC | tmpfs: switch to use of invalfc() Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> | 07 February 2020, 19:48:44 UTC |
58c025f | Al Viro | 22 December 2019, 02:35:27 UTC | cgroup1: switch to use of errorfc() et.al. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> | 07 February 2020, 19:48:43 UTC |
bf45f7f | Al Viro | 22 December 2019, 02:34:41 UTC | procfs: switch to use of invalfc() Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> | 07 February 2020, 19:48:42 UTC |
b5db30c | Al Viro | 22 December 2019, 02:34:06 UTC | hugetlbfs: switch to use of invalfc() Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> | 07 February 2020, 19:48:42 UTC |
e1ee7d8 | Al Viro | 22 December 2019, 02:33:45 UTC | cramfs: switch to use of errofc() et.al. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> | 07 February 2020, 19:48:41 UTC |
77cb271 | Al Viro | 22 December 2019, 02:33:17 UTC | gfs2: switch to use of errorfc() et.al. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> | 07 February 2020, 19:48:41 UTC |
2e28c49 | Al Viro | 22 December 2019, 02:32:51 UTC | fuse: switch to use errorfc() et.al. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> | 07 February 2020, 19:48:40 UTC |
d53d0f7 | Al Viro | 22 December 2019, 02:31:52 UTC | ceph: use errorfc() and friends instead of spelling the prefix out Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> | 07 February 2020, 19:48:39 UTC |
a3ff937 | Al Viro | 22 December 2019, 02:30:50 UTC | prefix-handling analogues of errorf() and friends called errorfc/infofc/warnfc/invalfc Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> | 07 February 2020, 19:48:39 UTC |
328de52 | Al Viro | 18 December 2019, 05:02:31 UTC | turn fs_param_is_... into functions Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> | 07 February 2020, 19:48:38 UTC |
48ce73b | Al Viro | 18 December 2019, 01:03:59 UTC | fs_parse: handle optional arguments sanely Don't bother with "mixed" options that would allow both the form with and without argument (i.e. both -o foo and -o foo=bar). Rather than trying to shove both into a single fs_parameter_spec, allow having with-argument and no-argument specs with the same name and teach fs_parse to handle that. There are very few options of that sort, and they are actually easier to handle that way - callers end up with less postprocessing. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> | 07 February 2020, 19:48:37 UTC |
d7167b1 | Al Viro | 07 September 2019, 11:23:15 UTC | fs_parse: fold fs_parameter_desc/fs_parameter_spec The former contains nothing but a pointer to an array of the latter... Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> | 07 February 2020, 19:48:37 UTC |
96cafb9 | Eric Sandeen | 06 December 2019, 16:45:01 UTC | fs_parser: remove fs_parameter_description name field Unused now. Signed-off-by: Eric Sandeen <sandeen@redhat.com> Acked-by: David Howells <dhowells@redhat.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> | 07 February 2020, 19:48:36 UTC |
cc3c0b5 | Al Viro | 21 December 2019, 05:16:49 UTC | add prefix to fs_context->log ... turning it into struct p_log embedded into fs_context. Initialize the prefix with fs_type->name, turning fs_parse() into a trivial inline wrapper for __fs_parse(). This makes fs_parameter_description->name completely unused. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> | 07 February 2020, 19:48:35 UTC |
c80c98f | Al Viro | 21 December 2019, 05:06:01 UTC | ceph_parse_param(), ceph_parse_mon_ips(): switch to passing fc_log ... and now errorf() et.al. are never called with NULL fs_context, so we can get rid of conditional in those. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> | 07 February 2020, 19:48:34 UTC |
7f5d381 | Al Viro | 21 December 2019, 04:52:55 UTC | new primitive: __fs_parse() fs_parse() analogue taking p_log instead of fs_context. fs_parse() turned into a wrapper, callers in ceph_common and rbd switched to __fs_parse(). As the result, fs_parse() never gets NULL fs_context and neither do fs_context-based logging primitives Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> | 07 February 2020, 19:48:34 UTC |
2c3f3dc | Al Viro | 21 December 2019, 04:43:32 UTC | switch rbd and libceph to p_log-based primitives Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> | 07 February 2020, 19:48:33 UTC |
3fbb8d5 | Al Viro | 21 December 2019, 04:43:32 UTC | struct p_log, variants of warnf() et.al. taking that one instead primitives for prefixed logging Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> | 07 February 2020, 19:48:32 UTC |
9f09f64 | Al Viro | 21 December 2019, 03:10:36 UTC | teach logfc() to handle prefices, give it saner calling conventions Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> | 07 February 2020, 19:48:32 UTC |
fbc2d16 | Al Viro | 21 December 2019, 02:06:08 UTC | get rid of cg_invalf() pointless alias for invalf()... Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> | 07 February 2020, 19:48:31 UTC |
aa1918f | Al Viro | 18 December 2019, 01:09:08 UTC | get rid of fs_value_is_filename_empty Its behaviour is identical to that of fs_value_is_filename. It makes no sense, anyway - LOOKUP_EMPTY affects nothing whatsoever once the pathname has been imported from userland. And both fs_value_is_filename and fs_value_is_filename_empty carry an already imported pathname. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> | 07 February 2020, 19:48:30 UTC |
34264ae | Al Viro | 16 December 2019, 18:45:41 UTC | don't bother with explicit length argument for __lookup_constant() Have the arrays of constant_table self-terminated (by NULL ->name in the final entry). Simplifies lookup_constant() and allows to reuse the search for enum params as well. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> | 07 February 2020, 19:47:52 UTC |
3d96208 | Roberto Bergantinos Corpas | 04 February 2020, 10:32:56 UTC | sunrpc: expiry_time should be seconds not timeval When upcalling gssproxy, cache_head.expiry_time is set as a timeval, not seconds since boot. As such, RPC cache expiry logic will not clean expired objects created under auth.rpcsec.context cache. This has proven to cause kernel memory leaks on field. Using 64 bit variants of getboottime/timespec Expiration times have worked this way since 2010's c5b29f885afe "sunrpc: use seconds since boot in expiry cache". The gssproxy code introduced in 2012 added gss_proxy_save_rsc and introduced the bug. That's a while for this to lurk, but it required a bit of an extreme case to make it obvious. Signed-off-by: Roberto Bergantinos Corpas <rbergant@redhat.com> Cc: stable@vger.kernel.org Fixes: 030d794bf498 "SUNRPC: Use gssproxy upcall for server..." Tested-By: Frank Sorenson <sorenson@redhat.com> Signed-off-by: J. Bruce Fields <bfields@redhat.com> | 07 February 2020, 18:30:41 UTC |
50d0def | Chen Zhou | 03 February 2020, 01:43:57 UTC | nfsd: make nfsd_filecache_wq variable static Fix sparse warning: fs/nfsd/filecache.c:55:25: warning: symbol 'nfsd_filecache_wq' was not declared. Should it be static? Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Chen Zhou <chenzhou10@huawei.com> Signed-off-by: J. Bruce Fields <bfields@redhat.com> | 07 February 2020, 18:30:41 UTC |
dfa7f70 | Ido Schimmel | 07 February 2020, 17:29:28 UTC | drop_monitor: Do not cancel uninitialized work item Drop monitor uses a work item that takes care of constructing and sending netlink notifications to user space. In case drop monitor never started to monitor, then the work item is uninitialized and not associated with a function. Therefore, a stop command from user space results in canceling an uninitialized work item which leads to the following warning [1]. Fix this by not processing a stop command if drop monitor is not currently monitoring. [1] [ 31.735402] ------------[ cut here ]------------ [ 31.736470] WARNING: CPU: 0 PID: 143 at kernel/workqueue.c:3032 __flush_work+0x89f/0x9f0 ... [ 31.738120] CPU: 0 PID: 143 Comm: dwdump Not tainted 5.5.0-custom-09491-g16d4077796b8 #727 [ 31.741968] RIP: 0010:__flush_work+0x89f/0x9f0 ... [ 31.760526] Call Trace: [ 31.771689] __cancel_work_timer+0x2a6/0x3b0 [ 31.776809] net_dm_cmd_trace+0x300/0xef0 [ 31.777549] genl_rcv_msg+0x5c6/0xd50 [ 31.781005] netlink_rcv_skb+0x13b/0x3a0 [ 31.784114] genl_rcv+0x29/0x40 [ 31.784720] netlink_unicast+0x49f/0x6a0 [ 31.787148] netlink_sendmsg+0x7cf/0xc80 [ 31.790426] ____sys_sendmsg+0x620/0x770 [ 31.793458] ___sys_sendmsg+0xfd/0x170 [ 31.802216] __sys_sendmsg+0xdf/0x1a0 [ 31.806195] do_syscall_64+0xa0/0x540 [ 31.806885] entry_SYSCALL_64_after_hwframe+0x49/0xbe Fixes: 8e94c3bc922e ("drop_monitor: Allow user to start monitoring hardware drops") Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 07 February 2020, 17:48:36 UTC |