Revision 50cf156af7dc68a44409bef636585ef88ebbab34 authored by Yang Hongyang on 07 April 2009, 02:01:14 UTC, committed by Linus Torvalds on 07 April 2009, 15:31:10 UTC
Replace all DMA_40BIT_MASK macro with DMA_BIT_MASK(40) Signed-off-by: Yang Hongyang<yanghy@cn.fujitsu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
1 parent e911e0d
io_ordering.txt
On some platforms, so-called memory-mapped I/O is weakly ordered. On such
platforms, driver writers are responsible for ensuring that I/O writes to
memory-mapped addresses on their device arrive in the order intended. This is
typically done by reading a 'safe' device or bridge register, causing the I/O
chipset to flush pending writes to the device before any reads are posted. A
driver would usually use this technique immediately prior to the exit of a
critical section of code protected by spinlocks. This would ensure that
subsequent writes to I/O space arrived only after all prior writes (much like a
memory barrier op, mb(), only with respect to I/O).
A more concrete example from a hypothetical device driver:
...
CPU A: spin_lock_irqsave(&dev_lock, flags)
CPU A: val = readl(my_status);
CPU A: ...
CPU A: writel(newval, ring_ptr);
CPU A: spin_unlock_irqrestore(&dev_lock, flags)
...
CPU B: spin_lock_irqsave(&dev_lock, flags)
CPU B: val = readl(my_status);
CPU B: ...
CPU B: writel(newval2, ring_ptr);
CPU B: spin_unlock_irqrestore(&dev_lock, flags)
...
In the case above, the device may receive newval2 before it receives newval,
which could cause problems. Fixing it is easy enough though:
...
CPU A: spin_lock_irqsave(&dev_lock, flags)
CPU A: val = readl(my_status);
CPU A: ...
CPU A: writel(newval, ring_ptr);
CPU A: (void)readl(safe_register); /* maybe a config register? */
CPU A: spin_unlock_irqrestore(&dev_lock, flags)
...
CPU B: spin_lock_irqsave(&dev_lock, flags)
CPU B: val = readl(my_status);
CPU B: ...
CPU B: writel(newval2, ring_ptr);
CPU B: (void)readl(safe_register); /* maybe a config register? */
CPU B: spin_unlock_irqrestore(&dev_lock, flags)
Here, the reads from safe_register will cause the I/O chipset to flush any
pending writes before actually posting the read to the chipset, preventing
possible data corruption.
Computing file changes ...