| 50efacf | Baruch Siach | 30 June 2009, 18:41:39 UTC | gpio: pl061: fix IRQ handling for GPIOs >= PL061_GPIO_NR IRQ handling is wrong for any GPIO >= PL061_GPIO_NR. Fix this by implementing and using a proper .to_irq method. Signed-off-by: Baruch Siach <baruch@tkos.co.il> Cc: David Brownell <david-b@pacbell.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 01 July 2009, 01:56:01 UTC |
| 79d7f4e | Baruch Siach | 30 June 2009, 18:41:38 UTC | gpio: pl061: fix probe error handling code Note that IRQ has not been initialized when kmalloc() fails. Also, use DECLARE_BITMAP() to make the code clearer. Signed-off-by: Baruch Siach <baruch@tkos.co.il> Cc: David Brownell <david-b@pacbell.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 01 July 2009, 01:56:01 UTC |
| 66918dc | Yinghai Lu | 30 June 2009, 18:41:37 UTC | x86: only clear node_states for 64bit Nathan reported that | commit 73d60b7f747176dbdff826c4127d22e1fd3f9f74 | Author: Yinghai Lu <yinghai@kernel.org> | Date: Tue Jun 16 15:33:00 2009 -0700 | | page-allocator: clear N_HIGH_MEMORY map before we set it again | | SRAT tables may contains nodes of very small size. The arch code may | decide to not activate such a node. However, currently the early boot | code sets N_HIGH_MEMORY for such nodes. These nodes therefore seem to be | active although these nodes have no present pages. | | For 64bit N_HIGH_MEMORY == N_NORMAL_MEMORY, so that works for 64 bit too unintentionally and incorrectly clears the cpuset.mems cgroup attribute on an i386 kvm guest, meaning that cpuset.mems can not be used. Fix this by only clearing node_states[N_NORMAL_MEMORY] for 64bit only. and need to do save/restore for that in find_zone_movable_pfn Reported-by: Nathan Lynch <ntl@pobox.com> Tested-by: Nathan Lynch <ntl@pobox.com> Signed-off-by: Yinghai Lu <yinghai@kernel.org> Cc: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@elte.hu>, Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 01 July 2009, 01:56:01 UTC |
| b37f2d4 | Nikanth Karthikesan | 30 June 2009, 18:41:36 UTC | cpusets: document adding/removing cpus to cpuset elaborately By writing a tasks's pid to the file, a process adds that task to that cgroup/cpuset. But to add a cpu/mem to a cpuset, the new list of cpus should be written to the cpuset.mems file which would replace the old list of cpus. Make this clearer in the documentation. Signed-off-by: Nikanth Karthikesan <knikanth@suse.de> Signed-off-by: Li Zefan <lizf@cn.fujitsu.com> Acked-by: Paul Menage <menage@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 01 July 2009, 01:56:01 UTC |
| d7831a0 | Richard Kennedy | 30 June 2009, 18:41:35 UTC | mm: prevent balance_dirty_pages() from doing too much work balance_dirty_pages can overreact and move all of the dirty pages to writeback unnecessarily. balance_dirty_pages makes its decision to throttle based on the number of dirty plus writeback pages that are over the calculated limit,so it will continue to move pages even when there are plenty of pages in writeback and less than the threshold still dirty. This allows it to overshoot its limits and move all the dirty pages to writeback while waiting for the drives to catch up and empty the writeback list. A simple fio test easily demonstrates this problem. fio --name=f1 --directory=/disk1 --size=2G -rw=write --name=f2 --directory=/disk2 --size=1G --rw=write --startdelay=10 This is the simplest fix I could find, but I'm not entirely sure that it alone will be enough for all cases. But it certainly is an improvement on my desktop machine writing to 2 disks. Do we need something more for machines with large arrays where bdi_threshold * number_of_drives is greater than the dirty_ratio ? Signed-off-by: Richard Kennedy <richard@rsk.demon.co.uk> Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Jens Axboe <jens.axboe@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 01 July 2009, 01:56:01 UTC |
| df279ca | Renaud Lottiaux | 30 June 2009, 18:41:34 UTC | bsdacct: fix access to invalid filp in acct_on() The file opened in acct_on and freshly stored in the ns->bacct struct can be closed in acct_file_reopen by a concurrent call after we release acct_lock and before we call mntput(file->f_path.mnt). Record file->f_path.mnt in a local variable and use this variable only. Signed-off-by: Renaud Lottiaux <renaud.lottiaux@kerlabs.com> Signed-off-by: Louis Rilling <louis.rilling@kerlabs.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 01 July 2009, 01:56:00 UTC |
| b4f9018 | Joe Perches | 30 June 2009, 18:41:32 UTC | MAINTAINERS: STARFIRE/DURALAN update Ion's cs.columbia.edu email address no longer works. Signed-off-by: Joe Perches <joe@perches.com> Acked-by: Ion Badulescu <ionut@badula.org> Cc: "David S. Miller" <davem@davemloft.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 01 July 2009, 01:56:00 UTC |
| 8bc1ad7 | Zhang Rui | 30 June 2009, 18:41:31 UTC | kernel/resource.c: fix sign extension in reserve_setup() When the 32-bit signed quantities get assigned to the u64 resource_size_t, they are incorrectly sign-extended. Addresses http://bugzilla.kernel.org/show_bug.cgi?id=13253 Addresses http://bugzilla.kernel.org/show_bug.cgi?id=9905 Signed-off-by: Zhang Rui <rui.zhang@intel.com> Reported-by: Leann Ogasawara <leann@ubuntu.com> Cc: Pierre Ossman <drzeus@drzeus.cx> Reported-by: <pablomme@googlemail.com> Tested-by: <pablomme@googlemail.com> Cc: <stable@kernel.org> Cc: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 01 July 2009, 01:56:00 UTC |
| 529ba0d | David Brownell | 30 June 2009, 18:41:30 UTC | spi: bitbang bugfix in message setup Bugfix to spi_bitbang infrastructure: make sure to always set transfer parameters on the first pass through the message's per-transfer loop. This can matter with drivers that replace the per-word or per-buffer transfer primitives, on busses with multiple SPI devices. Previously, this could have started messages using the settings left after previous messages. The problem was observed when a high speed chip (m25p80 type flash) was running very slowly because a low speed device (avr8 microcontroller) had previously used the bus. Similar faults could have driven the low speed device too fast, or used an unexpected word size. Acked-by: Steven A. Falco <sfalco@harris.com> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 01 July 2009, 01:56:00 UTC |
| 537a1bf | Krzysztof Helt | 30 June 2009, 18:41:29 UTC | fbdev: add mutex for fb_mmap locking Add a mutex to avoid a circular locking problem between the mm layer semaphore and fbdev ioctl mutex through the fb_mmap() call. Also, add mutex to all places where smem_start and smem_len fields change so the mutex inside the fb_mmap() is actually used. Changing of these fields before calling the framebuffer_register() are not mutexed. This is 2.6.31 material. It removes one lockdep (fb_mmap() and register_framebuffer()) but there is still another one (fb_release() and register_framebuffer()). It also cleans up handling of the smem_start and smem_len fields used by mutexed section of the fb_mmap(). Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: "Rafael J. Wysocki" <rjw@sisk.pl> Cc: <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 01 July 2009, 01:56:00 UTC |
| 70d6027 | David Brownell | 30 June 2009, 18:41:27 UTC | spi: add spi_master flag word Add a new spi_master.flags word listing constraints relevant to that controller. Define the first constraint bit: a half duplex restriction. Include that constraint in the OMAP1 MicroWire controller driver. Have the mmc_spi host be the first customer of this flag. Its coding relies heavily on full duplex transfers, so it must fail when the underlying controller driver won't perform them. (The spi_write_then_read routine could use it too: use the temporarily-withdrawn full-duplex speedup unless this flag is set, in which case the existing code applies. Similarly, any spi_master implementing only SPI_3WIRE should set the flag.) Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Cc: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 01 July 2009, 01:56:00 UTC |
| b55f627 | David Brownell | 30 June 2009, 18:41:26 UTC | spi: new spi->mode bits Add two new spi_device.mode bits to accomodate more protocol options, and pass them through to usermode drivers: * SPI_NO_CS ... a second 3-wire variant, where the chipselect line is removed instead of a data line; transfers are still full duplex. This obviously has STRONG protocol implications since the chipselect transitions can't be used to synchronize state transitions with the SPI master. * SPI_READY ... defines open drain signal that's pulled low to pause the clock. This defines a 5-wire variant (normal 4-wire SPI plus READY) and two 4-wire variants (READY plus each of the 3-wire flavors). Such hardware flow control can be a big win. There are ADC converters and flash chips that expose READY signals, but not many host controllers support it today. The spi_bitbang code should be changed to use SPI_NO_CS instead of its current nonportable hack. That's a mode most hardware can easily support (unlike SPI_READY). Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Cc: "Paulraj, Sandeep" <s-paulraj@ti.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 01 July 2009, 01:56:00 UTC |
| c495682 | Thomas Gleixner | 30 June 2009, 18:41:25 UTC | dmapools: protect page_list walk in show_pools() show_pools() walks the page_list of a pool w/o protection against the list modifications in alloc/free. Take pool->lock to avoid stomping into nirvana. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Matthew Wilcox <willy@linux.intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 01 July 2009, 01:56:00 UTC |
| 4d6c13f | Bryan Donlan | 30 June 2009, 18:41:24 UTC | ext2: return -EIO not -ESTALE on directory traversal through deleted inode ext2_iget() returns -ESTALE if invoked on a deleted inode, in order to report errors to NFS properly. However, in ext[234]_lookup(), this -ESTALE can be propagated to userspace if the filesystem is corrupted such that a directory entry references a deleted inode. This leads to a misleading error message - "Stale NFS file handle" - and confusion on the part of the admin. The bug can be easily reproduced by creating a new filesystem, making a link to an unused inode using debugfs, then mounting and attempting to ls -l said link. This patch thus changes ext2_lookup to return -EIO if it receives -ESTALE from ext2_iget(), as ext2 does for other filesystem metadata corruption; and also invokes the appropriate ext*_error functions when this case is detected. Signed-off-by: Bryan Donlan <bdonlan@gmail.com> Cc: <linux-ext4@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 01 July 2009, 01:56:00 UTC |
| 341c87b | KAMEZAWA Hiroyuki | 30 June 2009, 18:41:23 UTC | elf: limit max map count to safe value With ELF, at generating coredump, some more headers other than used vmas are added. When max_map_count == 65536, a core generated by following kinds of code can be unreadable because the number of ELF's program header is written in 16bit in Ehdr (please see elf.h) and the number overflows. == ... = mmap(); (munmap, mprotect, etc...) if (failed) abort(); == This can happen in mmap/munmap/mprotect/etc...which calls split_vma(). I think 65536 is not safe as _default_ and reduce it to 65530 is good for avoiding unexpected corrupted core. Anyway, max_map_count can be enlarged by sysctl if a user is brave.. Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Hugh Dickins <hugh.dickins@tiscali.co.uk> Cc: Jakub Jelinek <jakub@redhat.com> Acked-by: Roland McGrath <roland@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 01 July 2009, 01:55:59 UTC |
| b1cfebc | Yang Shi | 30 June 2009, 18:41:22 UTC | edac: add DDR3 memory type for MPC85xx EDAC Since some new MPC85xx SOCs support DDR3 memory now, so add DDR3 memory type for MPC85xx EDAC. Signed-off-by: Yang Shi <yang.shi@windriver.com> Cc: Doug Thompson <norsk5@yahoo.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 01 July 2009, 01:55:59 UTC |
| c4285b4 | Michael Buesch | 30 June 2009, 18:41:21 UTC | parport/serial: add support for NetMos 9901 Multi-IO card Add support for the PCI-Express NetMos 9901 Multi-IO card. 0001:06:00.0 Serial controller [0700]: NetMos Technology Device [9710:9901] (prog-if 02 [16550]) Subsystem: Device [a000:1000] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 65 Region 0: I/O ports at 0030 [size=8] Region 1: Memory at 80105000 (32-bit, non-prefetchable) [size=4K] Region 4: Memory at 80104000 (32-bit, non-prefetchable) [size=4K] Capabilities: <access denied> Kernel driver in use: serial Kernel modules: 8250_pci 0001:06:00.1 Serial controller [0700]: NetMos Technology Device [9710:9901] (prog-if 02 [16550]) Subsystem: Device [a000:1000] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin B routed to IRQ 65 Region 0: I/O ports at 0020 [size=8] Region 1: Memory at 80103000 (32-bit, non-prefetchable) [size=4K] Region 4: Memory at 80102000 (32-bit, non-prefetchable) [size=4K] Capabilities: <access denied> Kernel driver in use: serial Kernel modules: 8250_pci 0001:06:00.2 Parallel controller [0701]: NetMos Technology Device [9710:9901] (prog-if 03 [IEEE1284]) Subsystem: Device [a000:2000] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin C routed to IRQ 65 Region 0: I/O ports at 0010 [size=8] Region 1: I/O ports at <unassigned> Region 2: Memory at 80101000 (32-bit, non-prefetchable) [size=4K] Region 4: Memory at 80100000 (32-bit, non-prefetchable) [size=4K] Capabilities: <access denied> Kernel driver in use: parport_pc Kernel modules: parport_pc [ 16.760181] PCI parallel port detected: 416c:0100, I/O at 0x812010(0x0), IRQ 65 [ 16.760225] parport0: PC-style at 0x812010, irq 65 [PCSPP,TRISTATE,EPP] [ 16.851842] serial 0001:06:00.0: enabling device (0004 -> 0007) [ 16.883776] 0001:06:00.0: ttyS0 at I/O 0x812030 (irq = 65) is a ST16650V2 [ 16.893832] serial 0001:06:00.1: enabling device (0004 -> 0007) [ 16.926537] 0001:06:00.1: ttyS1 at I/O 0x812020 (irq = 65) is a ST16650V2 Signed-off-by: Michael Buesch <mb@bu3sch.de> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 01 July 2009, 01:55:59 UTC |
| 972c71a | Peter Oberparleiter | 30 June 2009, 18:41:20 UTC | gcov: fix documentation Commonly available versions of cp and tar don't work well with special files created using seq_file. Mention this problem in the gcov documentation and update the helper script example to work around these problems. Signed-off-by: Peter Oberparleiter <oberpar@linux.vnet.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 01 July 2009, 01:55:59 UTC |
| b01e8dc | Tejun Heo | 30 June 2009, 18:41:18 UTC | alpha: fix percpu build breakage alpha percpu access requires custom SHIFT_PERCPU_PTR() definition for modules to work around addressing range limitation. This is done via generating inline assembly using C preprocessing which forces the assembler to generate external reference. This happens behind the compiler's back and makes the compiler think that static percpu variables in modules are unused. This used to be worked around by using __unused attribute for percpu variables which prevent the compiler from omitting the variable; however, recent declare/definition attribute unification change broke this as __used can't be used for declaration. Also, in the process, PER_CPU_ATTRIBUTES definition in alpha percpu.h got broken. This patch adds PER_CPU_DEF_ATTRIBUTES which is only used for definitions and make alpha use it to add __used for percpu variables in modules. This also fixes the PER_CPU_ATTRIBUTES double definition bug. Signed-off-by: Tejun Heo <tj@kernel.org> Tested-by: maximilian attems <max@stro.at> Acked-by: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Cc: Richard Henderson <rth@twiddle.net> Cc: <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 01 July 2009, 01:55:59 UTC |
| 15e3252 | Stephen Rothwell | 30 June 2009, 18:41:15 UTC | fbdev: work around old compiler bug When building with a 4.1.x compiler on powerpc64 (at least) we get this error: drivers/video/logo/logo_linux_mono.c:81: error: logo_linux_mono causes a section type conflict This was introduced by commit ae52bb2384f721562f15f719de1acb8e934733cb ("fbdev: move logo externs to header file"). This is a partial revert of that commit sufficient to not hit the compiler bug. Also convert _clut arrays from __initconst to __initdata. Sam said: Al analysed this some time ago. When we say something is const then _sometimes_ gcc annotate the section as const(?) - sometimes not. So if we have two variables/functions annotated __*const and gcc decides to annotate the section const only in one case we get a section type conflict. Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Krzysztof Helt <krzysztof.h1@poczta.fm> Cc: Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com> Cc: Kyle McMartin <kyle@mcmartin.ca> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 01 July 2009, 01:55:59 UTC |
| c15e504 | Joe Perches | 30 June 2009, 18:41:13 UTC | MAINTAINERS: update EDAC-I82975X As per Ranganathan's request. Signed-off-by: Joe Perches <joe@perches.com> Cc: Ranganathan Desikan <ravi@jetztechnologies.com> Cc: Arvind R. <arvind@jetztechnologies.com> Cc: Doug Thompson <norsk5@yahoo.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 01 July 2009, 01:55:59 UTC |
| 2a2325e | Heiko Carstens | 30 June 2009, 18:41:13 UTC | gcov: fix __ctors_start alignment The ctors section for each object file is eight byte aligned (on 64 bit). However the __ctors_start symbol starts at an arbitrary address dependent on the size of the previous sections. Therefore the linker may add some zeroes after __ctors_start to make sure the ctors contents are properly aligned. However the extra zeroes at the beginning aren't expected by the code. When walking the functions pointers contained in there and extra zeroes are added this may result in random jumps. So make sure that the __ctors_start symbol is always aligned as well. Fixes this crash on an allyesconfig on s390: [ 0.582482] Kernel BUG at 0000000000000012 [verbose debug info unavailable] [ 0.582489] illegal operation: 0001 [#1] SMP DEBUG_PAGEALLOC [ 0.582496] Modules linked in: [ 0.582501] CPU: 0 Tainted: G W 2.6.31-rc1-dirty #273 [ 0.582506] Process swapper (pid: 1, task: 000000003f218000, ksp: 000000003f2238e8) [ 0.582510] Krnl PSW : 0704200180000000 0000000000000012 (0x12) [ 0.582518] R:0 T:1 IO:1 EX:1 Key:0 M:1 W:0 P:0 AS:0 CC:2 PM:0 EA:3 [ 0.582524] Krnl GPRS: 0000000000036727 0000000000000010 0000000000000001 0000000000000001 [ 0.582529] 00000000001dfefa 0000000000000000 0000000000000000 0000000000000040 [ 0.582534] 0000000001fff0f0 0000000001790628 0000000002296048 0000000002296048 [ 0.582540] 00000000020c438e 0000000001786000 0000000002014a66 000000003f223e60 [ 0.582553] Krnl Code:>0000000000000012: 0000 unknown [ 0.582559] 0000000000000014: 0000 unknown [ 0.582564] 0000000000000016: 0000 unknown [ 0.582570] 0000000000000018: 0000 unknown [ 0.582575] 000000000000001a: 0000 unknown [ 0.582580] 000000000000001c: 0000 unknown [ 0.582585] 000000000000001e: 0000 unknown [ 0.582591] 0000000000000020: 0000 unknown [ 0.582596] Call Trace: [ 0.582599] ([<0000000002014a46>] kernel_init+0x622/0x7a0) [ 0.582607] [<0000000000113e22>] kernel_thread_starter+0x6/0xc [ 0.582615] [<0000000000113e1c>] kernel_thread_starter+0x0/0xc [ 0.582621] INFO: lockdep is turned off. [ 0.582624] Last Breaking-Event-Address: [ 0.582627] [<0000000002014a64>] kernel_init+0x640/0x7a0 Cc: Peter Oberparleiter <oberpar@linux.vnet.ibm.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 01 July 2009, 01:55:59 UTC |
| 1338901 | Davide Libenzi | 30 June 2009, 18:41:11 UTC | eventfd: revised interface and cleanups Change the eventfd interface to de-couple the eventfd memory context, from the file pointer instance. Without such change, there is no clean way to racely free handle the POLLHUP event sent when the last instance of the file* goes away. Also, now the internal eventfd APIs are using the eventfd context instead of the file*. This patch is required by KVM's IRQfd code, which is still under development. Signed-off-by: Davide Libenzi <davidel@xmailserver.org> Cc: Gregory Haskins <ghaskins@novell.com> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Benjamin LaHaise <bcrl@kvack.org> Cc: Avi Kivity <avi@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 01 July 2009, 01:55:58 UTC |
| f7c2df9 | Jiri Slaby | 30 June 2009, 20:10:13 UTC | AFS: Fix lock imbalance Don't unlock on vfs_rejected_lock path in afs_do_setlk, since the lock is unlocked after abort_attempt label. Signed-off-by: Jiri Slaby <jirislaby@gmail.com> Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 30 June 2009, 20:30:44 UTC |
| 5a4f13f | Linus Torvalds | 30 June 2009, 03:07:43 UTC | Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/ide-2.6 * git://git.kernel.org/pub/scm/linux/kernel/git/davem/ide-2.6: ide: memory overrun in ide_get_identity_ioctl() on big endian machines using ioctl HDIO_OBSOLETE_IDENTITY ide: fix resume for CONFIG_BLK_DEV_IDEACPI=y ide-cd: handle fragmented packet commands gracefully ide: always kill the whole request on error ide: fix ide_kill_rq() for special ide-{floppy,tape} driver requests | 30 June 2009, 03:07:43 UTC |
| e18ed14 | Christian Engelmayer | 30 June 2009, 02:31:41 UTC | ide: memory overrun in ide_get_identity_ioctl() on big endian machines using ioctl HDIO_OBSOLETE_IDENTITY This patch fixes a memory overrun in function ide_get_identity_ioctl() which chooses the size of a memory buffer depending on the ioctl command that led to the function call, however, passes that buffer to a function which needs the buffer size to be always chosen unconditionally. Due to conditional compilation the memory overrun can only happen on big endian machines. The error can be triggered using ioctl HDIO_OBSOLETE_IDENTITY. Usage of ioctl HDIO_GET_IDENTITY is safe. Signed-off-by: Christian Engelmayer <christian.engelmayer@frequentis.com> Acked-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 30 June 2009, 02:31:41 UTC |
| 2bf427b | Bartlomiej Zolnierkiewicz | 30 June 2009, 02:20:42 UTC | ide: fix resume for CONFIG_BLK_DEV_IDEACPI=y commit 2f0d0fd2a605666d38e290c5c0d2907484352dc4 ("ide-acpi: cleanup do_drive_get_GTF()") didn't account for the lack of hwif->acpidata check in generic_ide_suspend() [ indirect user of do_drive_get_GTF() through ide_acpi_exec_tfs() ] resulting in broken resume when ACPI support is enabled but ACPI data is unavailable. Fix it by adding ide_port_acpi() helper for checking if port needs ACPI handling and cleaning generic_ide_{suspend,resume}() to use it instead of hiding hwif->acpidata and ide_noacpi checks in IDE ACPI helpers (this should help in preventing similar bugs in the future). While at it: - kill superfluous debugging printks in ide_acpi_{get,push}_timing() Reported-and-tested-by: Etienne Basset <etienne.basset@numericable.fr> Also-reported-and-tested-by: Jeff Chua <jeff.chua.linux@gmail.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 30 June 2009, 02:20:42 UTC |
| ec9c45d | Linus Torvalds | 29 June 2009, 23:18:19 UTC | Merge master.kernel.org:/home/rmk/linux-2.6-arm * master.kernel.org:/home/rmk/linux-2.6-arm: (28 commits) [ARM] 5562/2: at91: add gpio button support for at91sam9g20ek [ARM] 5563/1: at91: at91sam9rlek lcd interface correction [ARM] 5565/2: Use PAGE_SIZE and RO_DATA() in link script [ARM] 5560/1: Avoid buffer overrun in case of an invalid IRQ [ARM] GTA02: build fixes (s3c2410_nand_set usage) [ARM] MINI2440: Add missing flash_bbt flat to NAND [ARM] s3c2410_defconfig: add MINI2440 machine to build [ARM] S3C: Fix S3C24XX build to not include s3c64xx IIS devices [ARM] S3C24XX: Fix missing s3c_iis_device. [ARM] MINI2440: remove duplicated #include [ARM] S3C24XX: Fix spi-bus configuration build errors OMAP: Fix IOMEM macro for assembly [ARM] S3C: Remove unused CONFIG_DEBUG_S3C_PORT [ARM] S3C24XX: Fix use of CONFIG_S3C24XX_PWM OMAP2/3: Initialize gpio debounce register OMAP: IOMMU: function flush_iotlb_page is not flushing correct entry OMAP3: RX51: Use OneNAND sync read / write OMAP2/3: gpmc-onenand: correct use of async timings OMAP3: DMA: Enable idlemodes for DMA OCP OMAP3: SRAM size fix for HS/EMU devices ... | 29 June 2009, 23:18:19 UTC |
| aa221cb | Linus Torvalds | 29 June 2009, 20:09:39 UTC | Merge branch 'for-linus' of git://git.infradead.org/users/eparis/notify * 'for-linus' of git://git.infradead.org/users/eparis/notify: fs: allow d_instantiate to be called with negative parent dentry | 29 June 2009, 20:09:39 UTC |
| 2bfdd79 | Linus Torvalds | 29 June 2009, 16:46:12 UTC | Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6: sound: OSS: mpu401, fix deadlock ALSA: hda - Add missing initializations for ALC268 and ALC269 ALSA: cmi8330: fix MPU-401 PnP init copy&paste bug ALSA: hda - Line In for Acer Inspire 6530G model sound: oxygen: make mic volume control mono MAINTAINERS: Add entry for twl4030 series soc codec driver ALSA: lx6464es - configure ethersound io channels sound: Use PCI_VDEVICE for CREATIVE and ECTIVA sound: Use PCI_VDEVICE ALSA: hda - Use model=acer-aspire-6530g for Acer Aspire 6930G ALSA: hda - Fix acer-aspire-6530g model quirk ALSA: hda - Add pin-sense trigger when needed for Realtek codecs ALSA: hda - Fix support for Samsung P50 with AD1986A codec ALSA: hda - Generalize the pin-detect quirk for Lenovo N100 ALSA: hda - Simplify AD1986A mixer definitions | 29 June 2009, 16:46:12 UTC |
| bb1e9b8 | Linus Torvalds | 29 June 2009, 16:44:44 UTC | Merge branch 'bugfixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/security-testing-2.6 * 'bugfixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/security-testing-2.6: integrity: add ima_counts_put (updated) integrity: ima audit hash_exists fix integrity: ima mq_open imbalance msg fix | 29 June 2009, 16:44:44 UTC |
| e717f33 | Linus Torvalds | 29 June 2009, 16:42:01 UTC | Merge branch 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: Revert "x86: cap iomem_resource to addressable physical memory" | 29 June 2009, 16:42:01 UTC |
| 1bfd4d5 | Linus Torvalds | 29 June 2009, 16:41:12 UTC | Merge branch 'for-linus' of git://git.o-hand.com/linux-rpurdie-backlight * 'for-linus' of git://git.o-hand.com/linux-rpurdie-backlight: backlight: Fix tdo24m crash on kmalloc | 29 June 2009, 16:41:12 UTC |
| 44b3615 | Ingo Molnar | 29 June 2009, 08:07:54 UTC | eeepc-laptop: Fix build failure with HOTPLUG_PCI && !SYSFS FYI, there's a post-rc1 build regression with certain configs: drivers/built-in.o: In function `pci_hp_deregister': (.text+0xb166): undefined reference to `pci_hp_remove_module_link' drivers/built-in.o: In function `pci_hp_deregister': (.text+0xb19f): undefined reference to `pci_destroy_slot' drivers/built-in.o: In function `__pci_hp_register': (.text+0xb583): undefined reference to `pci_create_slot' drivers/built-in.o: In function `__pci_hp_register': (.text+0xb5b1): undefined reference to `pci_hp_create_module_link' make: *** [.tmp_vmlinux1] Error 1 Caused by: | 2b121bc262fa03c94e653b2d44356c2f86c1bcdc is first bad commit | commit 2b121bc262fa03c94e653b2d44356c2f86c1bcdc | Date: Thu Jun 25 13:25:36 2009 +0200 | | eeepc-laptop: Register as a pci-hotplug device which changed the driver to use the PCI hotplug infrastructure, but didn't do a good job on the Kconfig rules. Signed-off-by: Ingo Molnar <mingo@elte.hu> Acked-by: Randy Dunlap <randy.dunlap@oracle.com> Acked-by: Len Brown <len.brown@intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 29 June 2009, 16:40:38 UTC |
| aef29bc | Alan Cox | 29 June 2009, 14:21:47 UTC | tty: Fix the leak in tty_ldisc_release Currently we reinit the ldisc on final tty close which is what the old code did to ensure that if the device retained its termios settings then it had the right ldisc. tty_ldisc_reinit does that but also leaves us with the reset ldisc reference which is then leaked. At this point we know the port will be recycled so we can kill the ldisc off completely rather than try and add another ldisc free up when the kref count hits zero. At this point it is safe to keep the ldisc closed as tty_ldisc waiting methods are only used from the user side, and as the final close we are the last such reference. Interrupt/driver side methods will always use the non wait version and get back a NULL. Found with kmemleak and investigated/identified by Catalin Marinas. Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 29 June 2009, 16:33:26 UTC |
| 9ea5ca7 | Jiri Slaby | 29 June 2009, 16:03:34 UTC | sound: OSS: mpu401, fix deadlock mpu401_chk_version is called with a spin lock already held. Don't take it again. Signed-off-by: Jiri Slaby <jirislaby@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> | 29 June 2009, 16:05:52 UTC |
| 580c9d3 | Takashi Iwai | 29 June 2009, 16:05:09 UTC | Merge branch 'fix/pci-vdevice' into for-linus * fix/pci-vdevice: sound: Use PCI_VDEVICE for CREATIVE and ECTIVA sound: Use PCI_VDEVICE | 29 June 2009, 16:05:09 UTC |
| e2cb0d9 | Takashi Iwai | 29 June 2009, 16:05:07 UTC | Merge branch 'fix/oxygen' into for-linus * fix/oxygen: sound: oxygen: make mic volume control mono | 29 June 2009, 16:05:07 UTC |
| 7d489c4 | Takashi Iwai | 29 June 2009, 16:05:06 UTC | Merge branch 'fix/misc' into for-linus * fix/misc: ALSA: cmi8330: fix MPU-401 PnP init copy&paste bug | 29 June 2009, 16:05:06 UTC |
| 0baddbc | Takashi Iwai | 29 June 2009, 16:05:05 UTC | Merge branch 'fix/lx6464es' into for-linus * fix/lx6464es: ALSA: lx6464es - configure ethersound io channels | 29 June 2009, 16:05:05 UTC |
| cdae219 | Takashi Iwai | 29 June 2009, 16:05:04 UTC | Merge branch 'fix/hda-samsung-p50' into for-linus * fix/hda-samsung-p50: ALSA: hda - Fix support for Samsung P50 with AD1986A codec ALSA: hda - Generalize the pin-detect quirk for Lenovo N100 ALSA: hda - Simplify AD1986A mixer definitions | 29 June 2009, 16:05:04 UTC |
| ae77b4e | Takashi Iwai | 29 June 2009, 16:05:02 UTC | Merge branch 'fix/hda' into for-linus * fix/hda: ALSA: hda - Add missing initializations for ALC268 and ALC269 ALSA: hda - Line In for Acer Inspire 6530G model ALSA: hda - Use model=acer-aspire-6530g for Acer Aspire 6930G ALSA: hda - Fix acer-aspire-6530g model quirk ALSA: hda - Add pin-sense trigger when needed for Realtek codecs | 29 June 2009, 16:05:02 UTC |
| e6ce306 | Jeremy Kerr | 29 June 2009, 06:31:58 UTC | fs: allow d_instantiate to be called with negative parent dentry The new fsnotify infrastructure (starting at 90586523) causes an oops in spufs, where we populate a directory with files before instantiating the directory itself. The new changes seem to have introduced an assumption that a dentry's parent will be positive when instantiating. This change makes it once again possible to d_instantiate a dentry with a negative parent, and brings __fsnotify_d_instantiate() into line with inotify_d_instantiate(), which already has this NULL check. Signed-off-by: Jeremy Kerr <jk@ozlabs.org> Signed-off-by: Eric Paris <eparis@redhat.com> | 29 June 2009, 14:00:58 UTC |
| 59c5fe6 | Nicolas Ferre | 29 June 2009, 11:11:50 UTC | [ARM] 5562/2: at91: add gpio button support for at91sam9g20ek This adds input keyboard gpio support on at91sam9g20ek board. It adds button 3 and 4. Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Acked-by: Andrew Victor <linux@maxim.org.za> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> | 29 June 2009, 10:19:27 UTC |
| 1d955eb | Takashi Iwai | 29 June 2009, 09:33:53 UTC | ALSA: hda - Add missing initializations for ALC268 and ALC269 During the changes to clean up / fix the realtek codec initialization routines in commit 4a79ba34cada6a5a4ee86ed53aa8a73ba1e6fc51, I forgot to add the check for ALC268 and ALC269. This resulted in the missing EAPD and COEF setup for these codecs. This patch adds the missing checks for these codecs. Reference: bko#13633 http://bugzilla.kernel.org/show_bug.cgi?id=13633 Signed-off-by: Takashi Iwai <tiwai@suse.de> | 29 June 2009, 09:33:53 UTC |
| c2a30d7 | Ondrej Zary | 27 June 2009, 14:17:08 UTC | ALSA: cmi8330: fix MPU-401 PnP init copy&paste bug Fix copy&paste bug in PnP MPU-401 initialization. Signed-off-by: Ondrej Zary <linux@rainbow-software.org> Cc: <stable@kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de> | 29 June 2009, 06:06:10 UTC |
| 684a884 | Tony Vroon | 26 June 2009, 08:27:50 UTC | ALSA: hda - Line In for Acer Inspire 6530G model The Line In connector is set up as PIN_IN by default, using VREF_HIZ. It is connected to both ADCs, so add it to both input selectors. Also add the ability to use the input mix (on a SoundBlaster one would call this "What You Hear"). Signed-off-by: Tony Vroon <tony@linx.net> Signed-off-by: Takashi Iwai <tiwai@suse.de> | 29 June 2009, 05:41:08 UTC |
| 5298976 | Linus Torvalds | 29 June 2009, 02:57:31 UTC | Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6 * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: be2net: Fix to avoid a crash seen on PPC with LRO and Jumbo frames. gro: Flush GRO packets in napi_disable_pending path inet: Call skb_orphan before tproxy activates mac80211: Use rcu_barrier() on unload. sunrpc: Use rcu_barrier() on unload. bridge: Use rcu_barrier() instead of syncronize_net() on unload. ipv6: Use rcu_barrier() on module unload. decnet: Use rcu_barrier() on module unload. sky2: Fix checksum endianness mdio add missing GPL flag sh_eth: remove redundant test on unsigned fsl_pq_mdio: Fix fsl_pq_mdio to work with modules ipv6: avoid wraparound for expired preferred lifetime tcp: missing check ACK flag of received segment in FIN-WAIT-2 state atl1*: add device_set_wakeup_enable to atl1*_set_wol Phonet: generate Netlink RTM_DELADDR when destroying a device Phonet: publicize the Netlink notification function Revert "veth: prevent oops caused by netdev destructor" cpmac: fix compilation failure introduced with netdev_ops conversion ipsec: Fix name of CAST algorithm | 29 June 2009, 02:57:31 UTC |
| bd46cb6 | Ajit Khaparde | 26 June 2009, 02:51:07 UTC | be2net: Fix to avoid a crash seen on PPC with LRO and Jumbo frames. While testing the driver on PPC, we ran into a crash with LRO, Jumbo frames. With CONFIG_PPC_64K_PAGES configured (a default in PPC), MAX_SKB_FRAGS drops to 3 and we were crossing the array limits on skb_shinfo(skb)->frags[]. Now we coalesce the frags from the same physical page into one slot in skb_shinfo(skb)->frags[] and go to the next index when the frag is from different physical page. This patch is against the net-2.6 tree. Signed-off-by: Ajit Khaparde <ajitk@serverengines.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 29 June 2009, 00:34:25 UTC |
| 94e5d71 | Mimi Zohar | 26 June 2009, 18:05:27 UTC | integrity: add ima_counts_put (updated) This patch fixes an imbalance message as reported by J.R. Okajima. The IMA file counters are incremented in ima_path_check. If the actual open fails, such as ETXTBSY, decrement the counters to prevent unnecessary imbalance messages. Reported-by: J.R. Okajima <hooanon05@yahoo.co.jp> Signed-off-by: Mimi Zohar <zohar@us.ibm.com> Signed-off-by: James Morris <jmorris@namei.org> | 28 June 2009, 22:59:10 UTC |
| 79b854c | Mimi Zohar | 26 June 2009, 15:25:00 UTC | integrity: ima audit hash_exists fix Audit the file name, not the template name. Signed-off-by: Mimi Zohar <zohar@us.ibm.com> Signed-off-by: James Morris <jmorris@namei.org> | 28 June 2009, 22:57:49 UTC |
| 46690f3 | Mimi Zohar | 26 June 2009, 15:24:05 UTC | integrity: ima mq_open imbalance msg fix This patch fixes an imbalance message as reported by Sanchin Sant. As we don't need to measure the message queue, just increment the counters. Reported-by: Sanchin Sant <sanchinp@in.ibm.com> Signed-off-by: Mimi Zohar <zohar@us.ibm.com> Acked-by: Serge Hallyn <serue@us.ibm.com> Signed-off-by: James Morris <jmorris@namei.org> | 28 June 2009, 22:56:46 UTC |
| 9a8fb9e | Linus Torvalds | 28 June 2009, 18:12:52 UTC | Merge branch 'kvm-updates/2.6.31' of git://git.kernel.org/pub/scm/virt/kvm/kvm * 'kvm-updates/2.6.31' of git://git.kernel.org/pub/scm/virt/kvm/kvm: KVM: shut up uninit compiler warning in paging_tmpl.h KVM: Ignore reads to K7 EVNTSEL MSRs KVM: VMX: Handle vmx instruction vmexits KVM: s390: Allow stfle instruction in the guest KVM: kvm/x86_emulate.c toggle_interruptibility() should be static KVM: ia64: fix ia64 build due to missing kallsyms_lookup() and double export KVM: protect concurrent make_all_cpus_request KVM: MMU: Allow 4K ptes with bit 7 (PAT) set KVM: Fix dirty bit tracking for slots with large pages | 28 June 2009, 18:12:52 UTC |
| 4142ac6 | Linus Torvalds | 28 June 2009, 18:08:09 UTC | Merge git://git.kernel.org/pub/scm/linux/kernel/git/sfrench/cifs-2.6 * git://git.kernel.org/pub/scm/linux/kernel/git/sfrench/cifs-2.6: cifs: fix fh_mutex locking in cifs_reopen_file | 28 June 2009, 18:08:09 UTC |
| a679128 | Linus Torvalds | 28 June 2009, 18:06:11 UTC | Merge git://git.infradead.org/iommu-2.6 * git://git.infradead.org/iommu-2.6: intel-iommu: fix Identity Mapping to be arch independent | 28 June 2009, 18:06:11 UTC |
| 8326e28 | Linus Torvalds | 28 June 2009, 18:05:28 UTC | Merge branch 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: x86, delay: tsc based udelay should have rdtsc_barrier x86, setup: correct include file in <asm/boot.h> x86, setup: Fix typo "CONFIG_x86_64" in <asm/boot.h> x86, mce: percpu mcheck_timer should be pinned x86: Add sysctl to allow panic on IOCK NMI error x86: Fix uv bau sending buffer initialization x86, mce: Fix mce resume on 32bit x86: Move init_gbpages() to setup_arch() x86: ensure percpu lpage doesn't consume too much vmalloc space x86: implement percpu_alloc kernel parameter x86: fix pageattr handling for lpage percpu allocator and re-enable it x86: reorganize cpa_process_alias() x86: prepare setup_pcpu_lpage() for pageattr fix x86: rename remap percpu first chunk allocator to lpage x86: fix duplicate free in setup_pcpu_remap() failure path percpu: fix too lazy vunmap cache flushing x86: Set cpu_llc_id on AMD CPUs | 28 June 2009, 18:05:28 UTC |
| 187dd31 | Linus Torvalds | 28 June 2009, 18:05:16 UTC | Merge branch 'timers-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'timers-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: timer stats: Optimize by adding quick check to avoid function calls timers: Fix timer_migration interface which accepts any number as input | 28 June 2009, 18:05:16 UTC |
| 9b71272 | Linus Torvalds | 28 June 2009, 18:05:04 UTC | Merge branch 'tracing-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'tracing-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: ftrace: Fix the output of profile ring-buffer: Make it generally available ftrace: Remove duplicate newline tracing: Fix trace_buf_size boot option ftrace: Fix t_hash_start() ftrace: Don't manipulate @pos in t_start() ftrace: Don't increment @pos in g_start() tracing: Reset iterator in t_start() trace_stat: Don't increment @pos in seq start() tracing_bprintk: Don't increment @pos in t_start() tracing/events: Don't increment @pos in s_start() | 28 June 2009, 18:05:04 UTC |
| 61abfd2 | Linus Torvalds | 28 June 2009, 18:02:32 UTC | Merge branch 'for-linus' of git://git.o-hand.com/linux-rpurdie-leds * 'for-linus' of git://git.o-hand.com/linux-rpurdie-leds: leds: Futher document blink_set leds: Add options to have GPIO LEDs start on or keep their state leds: LED driver for National Semiconductor LP3944 Funlight Chip leds: pca9532 - Indent using tabs, not spaces. leds: Remove an orphan Kconfig entry leds: Further document parameters for blink_set() leds: alix-leds2 fixed for Award BIOS leds: leds-gpio - fix a section mismatch leds: add the sysfs interface into the leds-bd2802 driver for changing wave pattern and led current. leds: change the license information leds: fix led-bd2802 errors while resuming | 28 June 2009, 18:02:32 UTC |
| bde8922 | Jaswinder Singh Rajput | 20 May 2009, 04:29:35 UTC | KVM: shut up uninit compiler warning in paging_tmpl.h Dixes compilation warning: CC arch/x86/kernel/io_delay.o arch/x86/kvm/paging_tmpl.h: In function ‘paging64_fetch’: arch/x86/kvm/paging_tmpl.h:279: warning: ‘sptep’ may be used uninitialized in this function arch/x86/kvm/paging_tmpl.h: In function ‘paging32_fetch’: arch/x86/kvm/paging_tmpl.h:279: warning: ‘sptep’ may be used uninitialized in this function warning is bogus (always have a least one level), but need to shut the compiler up. Signed-off-by: Jaswinder Singh Rajput <jaswinderrajput@gmail.com> Signed-off-by: Avi Kivity <avi@redhat.com> | 28 June 2009, 11:10:32 UTC |
| 9e69962 | Amit Shah | 15 June 2009, 07:55:34 UTC | KVM: Ignore reads to K7 EVNTSEL MSRs In commit 7fe29e0faacb650d31b9e9f538203a157bec821d we ignored the reads to the P6 EVNTSEL MSRs. That fixed crashes on Intel machines. Ignore the reads to K7 EVNTSEL MSRs as well to fix this on AMD hosts. This fixes Kaspersky antivirus crashing Windows guests on AMD hosts. Signed-off-by: Amit Shah <amit.shah@redhat.com> Signed-off-by: Avi Kivity <avi@redhat.com> | 28 June 2009, 11:10:31 UTC |
| e3c7cb6 | Avi Kivity | 16 June 2009, 11:19:52 UTC | KVM: VMX: Handle vmx instruction vmexits IF a guest tries to use vmx instructions, inject a #UD to let it know the instruction is not implemented, rather than crashing. This prevents guest userspace from crashing the guest kernel. Cc: stable@kernel.org Signed-off-by: Avi Kivity <avi@redhat.com> | 28 June 2009, 11:10:31 UTC |
| ef50f7a | Christian Borntraeger | 23 June 2009, 15:24:07 UTC | KVM: s390: Allow stfle instruction in the guest 2.6.31-rc introduced an architecture level set checker based on facility bits. e.g. if the kernel is compiled to run only on z9, several facility bits are checked very early and the kernel refuses to boot if a z9 specific facility is missing. Until now kvm on s390 did not implement the store facility extended (STFLE) instruction. A 2.6.31-rc kernel that was compiled for z9 or higher did not boot in kvm. This patch implements stfle. This patch should go in before 2.6.31. Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Avi Kivity <avi@redhat.com> | 28 June 2009, 11:10:30 UTC |
| a3f9d39 | Jaswinder Singh Rajput | 18 June 2009, 11:23:25 UTC | KVM: kvm/x86_emulate.c toggle_interruptibility() should be static toggle_interruptibility() is used only by same file, it should be static. Fixed following sparse warning : arch/x86/kvm/x86_emulate.c:1364:6: warning: symbol 'toggle_interruptibility' was not declared. Should it be static? Signed-off-by: Jaswinder Singh Rajput <jaswinderrajput@gmail.com> Signed-off-by: Avi Kivity <avi@redhat.com> | 28 June 2009, 11:10:30 UTC |
| ffdfa07 | Jes Sorensen | 17 June 2009, 09:08:08 UTC | KVM: ia64: fix ia64 build due to missing kallsyms_lookup() and double export Fix problem with double export of certain symbols from vsprintf.c which we do not wish to export from the kvm-intel.ko module. In addition, we do not have access to kallsyms_lookup() from the module, so make sure to #undef CONFIG_KALLSYMS Signed-off-by: Jes Sorensen <jes@sgi.com> Acked-by: Xiantao Zhang <xiantao.zhang@intel.com> Signed-off-by: Avi Kivity <avi@redhat.com> | 28 June 2009, 11:10:30 UTC |
| 8426192 | Marcelo Tosatti | 17 June 2009, 13:53:47 UTC | KVM: protect concurrent make_all_cpus_request make_all_cpus_request contains a race condition which can trigger false request completed status, as follows: CPU0 CPU1 if (test_and_set_bit(req,&vcpu->requests)) .... if (test_and_set_bit(req,&vcpu->requests)) .. return proceed to smp_call_function_many(wait=1) Use a spinlock to serialize concurrent CPUs. Cc: stable@kernel.org Signed-off-by: Andrea Arcangeli <aarcange@redhat.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by: Avi Kivity <avi@redhat.com> | 28 June 2009, 11:10:29 UTC |
| 29a4b93 | Avi Kivity | 19 May 2009, 10:29:27 UTC | KVM: MMU: Allow 4K ptes with bit 7 (PAT) set Bit 7 is perfectly legal in the 4K page leve; it is used for the PAT. Signed-off-by: Avi Kivity <avi@redhat.com> | 28 June 2009, 11:10:29 UTC |
| e244584 | Izik Eidus | 10 June 2009, 16:23:24 UTC | KVM: Fix dirty bit tracking for slots with large pages When slot is already allocated and being asked to be tracked we need to break the large pages. This code flush the mmu when someone ask a slot to start dirty bit tracking. Cc: stable@kernel.org Signed-off-by: Izik Eidus <ieidus@redhat.com> Signed-off-by: Avi Kivity <avi@redhat.com> | 28 June 2009, 11:10:29 UTC |
| ff8a4ba | H. Peter Anvin | 27 June 2009, 19:22:27 UTC | Revert "x86: cap iomem_resource to addressable physical memory" This reverts commit 95ee14e4379c5e19c0897c872350570402014742. Mikael Petterson <mikepe@it.uu.se> reported that at least one of his systems will not boot as a result. We have ruled out the detection algorithm malfunctioning, so it is not a matter of producing the incorrect bitmasks; rather, something in the application of them fails. Revert the commit until we can root cause and correct this problem. -stable team: this means the underlying commit should be rejected. Reported-and-isolated-by: Mikael Petterson <mikpe@it.uu.se> Signed-off-by: H. Peter Anvin <hpa@zytor.com> LKML-Reference: <200906261559.n5QFxJH8027336@pilspetsen.it.uu.se> Cc: stable@kernel.org Cc: Grant Grundler <grundler@parisc-linux.org> | 28 June 2009, 07:38:47 UTC |
| f0a71eb | Jeff Layton | 27 June 2009, 11:04:55 UTC | cifs: fix fh_mutex locking in cifs_reopen_file Fixes a regression caused by commit a6ce4932fbdbcd8f8e8c6df76812014351c32892 When this lock was converted to a mutex, the locks were turned into unlocks and vice-versa. Signed-off-by: Jeff Layton <jlayton@redhat.com> Acked-by: Shirish Pargaonkar <shirishp@us.ibm.com> Cc: Stable Tree <stable@kernel.org> Signed-off-by: Steve French <sfrench@us.ibm.com> | 27 June 2009, 23:46:43 UTC |
| 9a24ee0 | Nicolas Ferre | 24 June 2009, 16:13:48 UTC | [ARM] 5563/1: at91: at91sam9rlek lcd interface correction Here is a little update to the at91sam9rlek lcd interface. This will correct the power pin of the LCD. It will also add precision to the struct atmel_lcdfb_info scructure: backlight enabling and wiring mode correction: RGB wiring on the -EK board. Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Acked-by: Andrew Victor <linux@maxim.org.za> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> | 27 June 2009, 10:02:24 UTC |
| ff780cd | Herbert Xu | 27 June 2009, 02:27:04 UTC | gro: Flush GRO packets in napi_disable_pending path When NAPI is disabled while we're in net_rx_action, we end up calling __napi_complete without flushing GRO packets. This is a bug as it would cause the GRO packets to linger, of course it also literally BUGs to catch error like this :) This patch changes it to napi_complete, with the obligatory IRQ reenabling. This should be safe because we've only just disabled IRQs and it does not materially affect the test conditions in between. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net> | 27 June 2009, 02:27:04 UTC |
| 71f9dac | Herbert Xu | 27 June 2009, 02:22:37 UTC | inet: Call skb_orphan before tproxy activates As transparent proxying looks up the socket early and assigns it to the skb for later processing, we must drop any existing socket ownership prior to that in order to distinguish between the case where tproxy is active and where it is not. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net> | 27 June 2009, 02:22:37 UTC |
| 4a27096 | Jesper Dangaard Brouer | 26 June 2009, 10:45:53 UTC | mac80211: Use rcu_barrier() on unload. The mac80211 module uses rcu_call() thus it should use rcu_barrier() on module unload. The rcu_barrier() is placed in mech.c ieee80211_stop_mesh() which is invoked from ieee80211_stop() in case vif.type == NL80211_IFTYPE_MESH_POINT. Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Acked-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Jesper Dangaard Brouer <hawk@comx.dk> Signed-off-by: David S. Miller <davem@davemloft.net> | 26 June 2009, 20:51:36 UTC |
| 75de874 | Jesper Dangaard Brouer | 26 June 2009, 10:45:58 UTC | sunrpc: Use rcu_barrier() on unload. The sunrpc module uses rcu_call() thus it should use rcu_barrier() on module unload. Have not verified that the possibility for new call_rcu() callbacks has been disabled. As a hint for checking, the functions calling call_rcu() (unx_destroy_cred and generic_destroy_cred) are registered as crdestroy function pointer in struct rpc_credops. Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Acked-by: Trond Myklebust <Trond.Myklebust@netapp.com> Signed-off-by: Jesper Dangaard Brouer <hawk@comx.dk> Signed-off-by: David S. Miller <davem@davemloft.net> | 26 June 2009, 20:51:34 UTC |
| 473c22d | Jesper Dangaard Brouer | 26 June 2009, 10:45:48 UTC | bridge: Use rcu_barrier() instead of syncronize_net() on unload. When unloading modules that uses call_rcu() callbacks, then we must use rcu_barrier(). This module uses syncronize_net() which is not enough to be sure that all callback has been completed. Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Signed-off-by: Jesper Dangaard Brouer <hawk@comx.dk> Signed-off-by: David S. Miller <davem@davemloft.net> | 26 June 2009, 20:51:32 UTC |
| 1f2ccd0 | Jesper Dangaard Brouer | 26 June 2009, 10:46:03 UTC | ipv6: Use rcu_barrier() on module unload. The ipv6 module uses rcu_call() thus it should use rcu_barrier() on module unload. Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Signed-off-by: Jesper Dangaard Brouer <hawk@comx.dk> Signed-off-by: David S. Miller <davem@davemloft.net> | 26 June 2009, 20:51:31 UTC |
| 10e8544 | Jesper Dangaard Brouer | 26 June 2009, 10:46:08 UTC | decnet: Use rcu_barrier() on module unload. The decnet module unloading as been disabled with a '#if 0' statement, because it have had issues. We add a rcu_barrier() anyhow for correctness. The maintainer (Chrissie Caulfield) will look into the unload issue when time permits. Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Acked-by: Chrissie Caulfield <christine.caulfield@googlemail.com> Signed-off-by: Jesper Dangaard Brouer <hawk@comx.dk> Signed-off-by: David S. Miller <davem@davemloft.net> | 26 June 2009, 20:51:27 UTC |
| 9c72ebe | Borislav Petkov | 26 June 2009, 18:22:37 UTC | ide-cd: handle fragmented packet commands gracefully There are some devices in the wild that clear the DRQ bit during the last word of a packet command and therefore could use a "second chance" for that last word of data to be xferred instead of simply failing the request. Do that by attempting to suck in those last bytes in PIO mode. In addition, the ATA_ERR bit has to be cleared for we cannot be sure the data is valid otherwise. See http://bugzilla.kernel.org/show_bug.cgi?id=13399 for details. Signed-off-by: Borislav Petkov <petkovbb@gmail.com> Acked-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 26 June 2009, 18:22:37 UTC |
| 4075ea8 | Linus Torvalds | 26 June 2009, 16:39:40 UTC | Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp: amd64_edac: misc small cleanups amd64_edac: fix ecc_enable_override handling amd64_edac: check only ECC bit in amd64_determine_edac_cap | 26 June 2009, 16:39:40 UTC |
| 919a6d1 | Linus Torvalds | 26 June 2009, 16:39:02 UTC | Merge branch 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc * 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: (29 commits) powerpc/rtas: Fix watchdog driver temperature read functionality powerpc/mm: Fix potential access to freed pages when using hugetlbfs powerpc/440: Fix warning early debug code powerpc/of: Fix usage of dev_set_name() in of_device_alloc() powerpc/pasemi: Use raw spinlock in SMP TB sync powerpc: Use one common impl. of RTAS timebase sync and use raw spinlock powerpc/rtas: Turn rtas lock into a raw spinlock powerpc: Add irqtrace support for 32-bit powerpc powerpc/BSR: Fix BSR to allow mmap of small BSR on 64k kernel powerpc/BSR: add 4096 byte BSR size powerpc: Map more memory early on 601 processors powerpc/pmac: Fix DMA ops for MacIO devices powerpc/mm: Make k(un)map_atomic out of line powerpc: Fix mpic alloc warning powerpc: Fix output from show_regs powerpc/pmac: Fix issues with PowerMac "PowerSurge" SMP powerpc/amigaone: Limit ISA I/O range to 4k in the device tree powerpc/warp: Platform fix for i2c change powerpc: Have git ignore generated files from dtc compile powerpc/mpic: Fix mapping of "DCR" based MPIC variants ... | 26 June 2009, 16:39:02 UTC |
| cf2acfb | Linus Torvalds | 26 June 2009, 16:37:52 UTC | Merge branch 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6 * 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6: ACPI: video: prevent NULL deref in acpi_get_pci_dev() eeepc-laptop: add rfkill support for the 3G modem in Eee PC 901 Go eeepc-laptop: get the right value for CMSG eeepc-laptop: makes get_acpi() returns -ENODEV eeepc-laptop: right parent device eeepc-laptop: rfkill refactoring eeepc-laptop.c: use pr_fmt and pr_<level> eeepc-laptop: Register as a pci-hotplug device | 26 June 2009, 16:37:52 UTC |
| aada1bc | Linus Torvalds | 26 June 2009, 16:37:19 UTC | Merge git://git.kernel.org/pub/scm/linux/kernel/git/sfrench/cifs-2.6 * git://git.kernel.org/pub/scm/linux/kernel/git/sfrench/cifs-2.6: [CIFS] remove unknown mount option warning message [CIFS] remove bkl usage from umount begin cifs: Fix incorrect return code being printed in cFYI messages [CIFS] cleanup asn handling for ntlmssp [CIFS] Copy struct *after* setting the port, instead of before. cifs: remove rw/ro options cifs: fix problems with earlier patches cifs: have cifs parse scope_id out of IPv6 addresses and use it [CIFS] Do not send tree disconnect if session is already disconnected [CIFS] Fix build break cifs: display scopeid in /proc/mounts cifs: add new routine for converting AF_INET and AF_INET6 addrs cifs: have cifs_show_options show forceuid/forcegid options cifs: remove unneeded NULL checks from cifs_show_options | 26 June 2009, 16:37:19 UTC |
| b938979 | Anton Vorontsov | 26 June 2009, 16:28:42 UTC | sky2: Fix checksum endianness sky2 driver on PowerPC targets floods kernel log with following errors: eth1: hw csum failure. Call Trace: [ef84b8a0] [c00075e4] show_stack+0x50/0x160 (unreliable) [ef84b8d0] [c02fa178] netdev_rx_csum_fault+0x3c/0x5c [ef84b8f0] [c02f6920] __skb_checksum_complete_head+0x7c/0x84 [ef84b900] [c02f693c] __skb_checksum_complete+0x14/0x24 [ef84b910] [c0337e08] tcp_v4_rcv+0x4c8/0x6f8 [ef84b940] [c031a9c8] ip_local_deliver+0x98/0x210 [ef84b960] [c031a788] ip_rcv+0x38c/0x534 [ef84b990] [c0300338] netif_receive_skb+0x260/0x36c [ef84b9c0] [c025de00] sky2_poll+0x5dc/0xcf8 [ef84ba20] [c02fb7fc] net_rx_action+0xc0/0x144 The NIC is Yukon-2 EC chip revision 1. Converting checksum field from le16 to CPU byte order fixes the issue. Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 26 June 2009, 16:28:42 UTC |
| 7e0d8a8 | Linus Torvalds | 26 June 2009, 15:48:42 UTC | Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6 * git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6: sparc32: Fix makefile not generating required files sparc32: Fix tftpboot.img Makefile sparc: fix tftpboot.img build sparc32: Fix obvious build issues for tftpboot.img build. sparc64: Fix build warnings in piggyback_64.c sparc64: Don't use alloc_bootmem() in init_IRQ() code paths. | 26 June 2009, 15:48:42 UTC |
| 37da045 | Borislav Petkov | 10 June 2009, 15:36:57 UTC | amd64_edac: misc small cleanups - cleanup debug calls - shorten function names - cleanup error exit paths Signed-off-by: Borislav Petkov <borislav.petkov@amd.com> | 26 June 2009, 11:06:41 UTC |
| 30c875c | Borislav Petkov | 22 June 2009, 17:42:24 UTC | amd64_edac: fix ecc_enable_override handling amd64_check_ecc_enabled() returns non-zero status when ECC checking/correcting is disabled and this fails further loading of the driver even when 'ecc_enable_override' boot param is used. Fix that by clearing return status in that case. Signed-off-by: Borislav Petkov <borislav.petkov@amd.com> | 26 June 2009, 11:06:41 UTC |
| 584fcff | Borislav Petkov | 10 June 2009, 16:29:54 UTC | amd64_edac: check only ECC bit in amd64_determine_edac_cap Checking whether the machine is using ECC enabled DRAM is done through testing the DimmEccEn bit in the DRAM Cfg Low register (F2x[1,0]90). Do that instead of testing all bits from the DimmEccEn upwards. Also, remove mci->edac_cap assignment and use value returned from amd64_determine_edac_cap(). Signed-off-by: Borislav Petkov <borislav.petkov@amd.com> | 26 June 2009, 11:06:40 UTC |
| 7e25a24 | Chris Wright | 26 June 2009, 01:52:05 UTC | intel-iommu: fix Identity Mapping to be arch independent Drop the e820 scanning and use existing function for finding valid RAM regions to add to 1:1 mapping. Signed-off-by: Chris Wright <chrisw@redhat.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com> | 26 June 2009, 10:26:27 UTC |
| 0296e42 | Li Zefan | 26 June 2009, 03:15:37 UTC | ftrace: Fix the output of profile The first entry of the ftrace profile was always skipped when reading trace_stat/functionX. Signed-off-by: Li Zefan <lizf@cn.fujitsu.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <4A443D59.4080307@cn.fujitsu.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> | 26 June 2009, 07:25:42 UTC |
| fd0cca7 | Benjamin Herrenschmidt | 26 June 2009, 06:58:01 UTC | Merge commit 'kumar/next' into merge | 26 June 2009, 06:58:01 UTC |
| 5e95524 | Bartlomiej Zolnierkiewicz | 23 June 2009, 11:27:27 UTC | ide: always kill the whole request on error * Use blk_rq_bytes() instead of obsolete ide_rq_bytes() in ide_kill_rq() and ide_floppy_do_request() for failed requests. [ bugfix part ] * Use blk_rq_bytes() instead of obsolete ide_rq_bytes() in ide_do_devset() and ide_complete_drive_reset(). Then remove ide_rq_bytes(). [ cleanup part ] Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 26 June 2009, 06:57:16 UTC |
| 7895475 | Bartlomiej Zolnierkiewicz | 23 June 2009, 11:26:06 UTC | ide: fix ide_kill_rq() for special ide-{floppy,tape} driver requests Such requests should be failed with -EIO (like all other requests in this function) instead of being completed successfully. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 26 June 2009, 06:57:14 UTC |
| 5ba762c | Adrian Reber | 26 March 2009, 02:05:42 UTC | powerpc/rtas: Fix watchdog driver temperature read functionality Using the RTAS watchdog driver to read out the temperature crashes on a PXCAB: Unable to handle kernel paging request for data at address 0xfe347b50 Faulting instruction address: 0xc00000000001af64 Oops: Kernel access of bad area, sig: 11 [#1] The wrong usage of "(void *)__pa(&temperature)" in rtas_call() is removed by using the function rtas_get_sensor() which does the right thing. Signed-off-by: Adrian Reber <adrian@lisas.de> Acked-by: Utz Bacher <utz.bacher@de.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> | 26 June 2009, 06:55:37 UTC |
| 6c16a74 | Benjamin Herrenschmidt | 15 June 2009, 16:53:43 UTC | powerpc/mm: Fix potential access to freed pages when using hugetlbfs When using 64k page sizes, our PTE pages are split in two halves, the second half containing the "extension" used to keep track of individual 4k pages when not using HW 64k pages. However, our page tables used for hugetlb have a slightly different format and don't carry that "second half". Our code that batched PTEs to be invalidated unconditionally reads the "second half" (to put it into the batch), which means that when called to invalidate hugetlb PTEs, it will access unrelated memory. It breaks when CONFIG_DEBUG_PAGEALLOC is enabled. This fixes it by only accessing the second half when the _PAGE_COMBO bit is set in the first half, which indicates that we are dealing with a "combo" page which represents 16x4k subpages. Anything else shouldn't have this bit set and thus not require loading from the second half. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> | 26 June 2009, 06:55:36 UTC |
| f694cda | Benjamin Herrenschmidt | 16 June 2009, 15:55:19 UTC | powerpc/440: Fix warning early debug code The function udbg_44x_as1_flush() has the wrong prototype causing a warning when enabling 440 early debug. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> | 26 June 2009, 06:55:35 UTC |
| 03c01aa | Benjamin Herrenschmidt | 16 June 2009, 15:55:18 UTC | powerpc/of: Fix usage of dev_set_name() in of_device_alloc() dev_set_name() takes a format string, so use it properly and avoid a warning with recent gcc's Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> | 26 June 2009, 06:55:35 UTC |
| 6893ce6 | Benjamin Herrenschmidt | 16 June 2009, 16:42:51 UTC | powerpc/pasemi: Use raw spinlock in SMP TB sync spin_lock() can hang if called while the timebase is frozen, so use a raw lock instead, also disable interrupts while at it. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> | 26 June 2009, 06:55:34 UTC |
| c4007a2 | Benjamin Herrenschmidt | 16 June 2009, 16:42:50 UTC | powerpc: Use one common impl. of RTAS timebase sync and use raw spinlock Several platforms use their own copy of what is essentially the same code, using RTAS to synchronize the timebases when bringing up new CPUs. This moves it all into a single common implementation and additionally turns the spinlock into a raw spinlock since the former can rely on the timebase not being frozen when spinlock debugging is enabled, and finally masks interrupts while the timebase is disabled. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> | 26 June 2009, 06:55:25 UTC |
| f97bb36 | Benjamin Herrenschmidt | 16 June 2009, 16:42:49 UTC | powerpc/rtas: Turn rtas lock into a raw spinlock RTAS currently uses a normal spinlock. However it can be called from contexts where this is not necessarily a good idea. For example, it can be called while syncing timebases, with the core timebase being frozen. Unfortunately, that will deadlock in case of lock contention when spinlock debugging is enabled as the spin lock debugging code will try to use __delay() which ... relies on the timebase being enabled. Also RTAS can be used in some low level IRQ handling code path so it may as well be a raw spinlock for -rt sake. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> | 26 June 2009, 04:37:27 UTC |
