Revision 521a547ced6477c54b4b0cc206000406c221b4d6 authored by Linus Torvalds on 18 September 2022, 20:44:14 UTC, committed by Linus Torvalds on 18 September 2022, 20:44:14 UTC
1 parent 7c18b45
blk-pm.c
// SPDX-License-Identifier: GPL-2.0
#include <linux/blk-mq.h>
#include <linux/blk-pm.h>
#include <linux/blkdev.h>
#include <linux/pm_runtime.h>
#include "blk-mq.h"
#include "blk-mq-tag.h"
/**
* blk_pm_runtime_init - Block layer runtime PM initialization routine
* @q: the queue of the device
* @dev: the device the queue belongs to
*
* Description:
* Initialize runtime-PM-related fields for @q and start auto suspend for
* @dev. Drivers that want to take advantage of request-based runtime PM
* should call this function after @dev has been initialized, and its
* request queue @q has been allocated, and runtime PM for it can not happen
* yet(either due to disabled/forbidden or its usage_count > 0). In most
* cases, driver should call this function before any I/O has taken place.
*
* This function takes care of setting up using auto suspend for the device,
* the autosuspend delay is set to -1 to make runtime suspend impossible
* until an updated value is either set by user or by driver. Drivers do
* not need to touch other autosuspend settings.
*
* The block layer runtime PM is request based, so only works for drivers
* that use request as their IO unit instead of those directly use bio's.
*/
void blk_pm_runtime_init(struct request_queue *q, struct device *dev)
{
q->dev = dev;
q->rpm_status = RPM_ACTIVE;
pm_runtime_set_autosuspend_delay(q->dev, -1);
pm_runtime_use_autosuspend(q->dev);
}
EXPORT_SYMBOL(blk_pm_runtime_init);
/**
* blk_pre_runtime_suspend - Pre runtime suspend check
* @q: the queue of the device
*
* Description:
* This function will check if runtime suspend is allowed for the device
* by examining if there are any requests pending in the queue. If there
* are requests pending, the device can not be runtime suspended; otherwise,
* the queue's status will be updated to SUSPENDING and the driver can
* proceed to suspend the device.
*
* For the not allowed case, we mark last busy for the device so that
* runtime PM core will try to autosuspend it some time later.
*
* This function should be called near the start of the device's
* runtime_suspend callback.
*
* Return:
* 0 - OK to runtime suspend the device
* -EBUSY - Device should not be runtime suspended
*/
int blk_pre_runtime_suspend(struct request_queue *q)
{
int ret = 0;
if (!q->dev)
return ret;
WARN_ON_ONCE(q->rpm_status != RPM_ACTIVE);
spin_lock_irq(&q->queue_lock);
q->rpm_status = RPM_SUSPENDING;
spin_unlock_irq(&q->queue_lock);
/*
* Increase the pm_only counter before checking whether any
* non-PM blk_queue_enter() calls are in progress to avoid that any
* new non-PM blk_queue_enter() calls succeed before the pm_only
* counter is decreased again.
*/
blk_set_pm_only(q);
ret = -EBUSY;
/* Switch q_usage_counter from per-cpu to atomic mode. */
blk_freeze_queue_start(q);
/*
* Wait until atomic mode has been reached. Since that
* involves calling call_rcu(), it is guaranteed that later
* blk_queue_enter() calls see the pm-only state. See also
* http://lwn.net/Articles/573497/.
*/
percpu_ref_switch_to_atomic_sync(&q->q_usage_counter);
if (percpu_ref_is_zero(&q->q_usage_counter))
ret = 0;
/* Switch q_usage_counter back to per-cpu mode. */
blk_mq_unfreeze_queue(q);
if (ret < 0) {
spin_lock_irq(&q->queue_lock);
q->rpm_status = RPM_ACTIVE;
pm_runtime_mark_last_busy(q->dev);
spin_unlock_irq(&q->queue_lock);
blk_clear_pm_only(q);
}
return ret;
}
EXPORT_SYMBOL(blk_pre_runtime_suspend);
/**
* blk_post_runtime_suspend - Post runtime suspend processing
* @q: the queue of the device
* @err: return value of the device's runtime_suspend function
*
* Description:
* Update the queue's runtime status according to the return value of the
* device's runtime suspend function and mark last busy for the device so
* that PM core will try to auto suspend the device at a later time.
*
* This function should be called near the end of the device's
* runtime_suspend callback.
*/
void blk_post_runtime_suspend(struct request_queue *q, int err)
{
if (!q->dev)
return;
spin_lock_irq(&q->queue_lock);
if (!err) {
q->rpm_status = RPM_SUSPENDED;
} else {
q->rpm_status = RPM_ACTIVE;
pm_runtime_mark_last_busy(q->dev);
}
spin_unlock_irq(&q->queue_lock);
if (err)
blk_clear_pm_only(q);
}
EXPORT_SYMBOL(blk_post_runtime_suspend);
/**
* blk_pre_runtime_resume - Pre runtime resume processing
* @q: the queue of the device
*
* Description:
* Update the queue's runtime status to RESUMING in preparation for the
* runtime resume of the device.
*
* This function should be called near the start of the device's
* runtime_resume callback.
*/
void blk_pre_runtime_resume(struct request_queue *q)
{
if (!q->dev)
return;
spin_lock_irq(&q->queue_lock);
q->rpm_status = RPM_RESUMING;
spin_unlock_irq(&q->queue_lock);
}
EXPORT_SYMBOL(blk_pre_runtime_resume);
/**
* blk_post_runtime_resume - Post runtime resume processing
* @q: the queue of the device
*
* Description:
* For historical reasons, this routine merely calls blk_set_runtime_active()
* to do the real work of restarting the queue. It does this regardless of
* whether the device's runtime-resume succeeded; even if it failed the
* driver or error handler will need to communicate with the device.
*
* This function should be called near the end of the device's
* runtime_resume callback.
*/
void blk_post_runtime_resume(struct request_queue *q)
{
blk_set_runtime_active(q);
}
EXPORT_SYMBOL(blk_post_runtime_resume);
/**
* blk_set_runtime_active - Force runtime status of the queue to be active
* @q: the queue of the device
*
* If the device is left runtime suspended during system suspend the resume
* hook typically resumes the device and corrects runtime status
* accordingly. However, that does not affect the queue runtime PM status
* which is still "suspended". This prevents processing requests from the
* queue.
*
* This function can be used in driver's resume hook to correct queue
* runtime PM status and re-enable peeking requests from the queue. It
* should be called before first request is added to the queue.
*
* This function is also called by blk_post_runtime_resume() for
* runtime resumes. It does everything necessary to restart the queue.
*/
void blk_set_runtime_active(struct request_queue *q)
{
int old_status;
if (!q->dev)
return;
spin_lock_irq(&q->queue_lock);
old_status = q->rpm_status;
q->rpm_status = RPM_ACTIVE;
pm_runtime_mark_last_busy(q->dev);
pm_request_autosuspend(q->dev);
spin_unlock_irq(&q->queue_lock);
if (old_status != RPM_ACTIVE)
blk_clear_pm_only(q);
}
EXPORT_SYMBOL(blk_set_runtime_active);
![swh spinner](/static/img/swh-spinner.gif)
Computing file changes ...