Revision 52d214976d4f64504c1bbb52d47b46a5a3d5ee42 authored by Hamdan Igbaria on 05 February 2020, 12:31:12 UTC, committed by Saeed Mahameed on 19 February 2020, 03:01:19 UTC
Set vport gvmi in the tag, only when source gvmi is set in the bit mask.
Fixes: 26d688e3 ("net/mlx5: DR, Add Steering entry (STE) utilities")
Signed-off-by: Hamdan Igbaria <hamdani@mellanox.com>
Reviewed-by: Alex Vesker <valex@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
1 parent 1ad6c43
wd501p.h
/* SPDX-License-Identifier: GPL-1.0+ */
/*
* Industrial Computer Source WDT500/501 driver
*
* (c) Copyright 1995 CymruNET Ltd
* Innovation Centre
* Singleton Park
* Swansea
* Wales
* UK
* SA2 8PP
*
* http://www.cymru.net
*
* Release 0.04.
*/
#define WDT_COUNT0 (io+0)
#define WDT_COUNT1 (io+1)
#define WDT_COUNT2 (io+2)
#define WDT_CR (io+3)
#define WDT_SR (io+4) /* Start buzzer on PCI write */
#define WDT_RT (io+5) /* Stop buzzer on PCI write */
#define WDT_BUZZER (io+6) /* PCI only: rd=disable, wr=enable */
#define WDT_DC (io+7)
/* The following are only on the PCI card, they're outside of I/O space on
* the ISA card: */
#define WDT_CLOCK (io+12) /* COUNT2: rd=16.67MHz, wr=2.0833MHz */
/* inverted opto isolated reset output: */
#define WDT_OPTONOTRST (io+13) /* wr=enable, rd=disable */
/* opto isolated reset output: */
#define WDT_OPTORST (io+14) /* wr=enable, rd=disable */
/* programmable outputs: */
#define WDT_PROGOUT (io+15) /* wr=enable, rd=disable */
/* FAN 501 500 */
#define WDC_SR_WCCR 1 /* Active low */ /* X X X */
#define WDC_SR_TGOOD 2 /* X X - */
#define WDC_SR_ISOI0 4 /* X X X */
#define WDC_SR_ISII1 8 /* X X X */
#define WDC_SR_FANGOOD 16 /* X - - */
#define WDC_SR_PSUOVER 32 /* Active low */ /* X X - */
#define WDC_SR_PSUUNDR 64 /* Active low */ /* X X - */
#define WDC_SR_IRQ 128 /* Active low */ /* X X X */
Computing file changes ...
