| 54577e5 | Paolo Bonzini | 20 August 2019, 15:35:52 UTC | selftests: kvm: fix state save/load on processors without XSAVE state_test and smm_test are failing on older processors that do not have xcr0. This is because on those processor KVM does provide support for KVM_GET/SET_XSAVE (to avoid having to rely on the older KVM_GET/SET_FPU) but not for KVM_GET/SET_XCRS. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> | 21 August 2019, 08:27:35 UTC |
| c930e19 | Paolo Bonzini | 14 August 2019, 16:07:34 UTC | selftests: kvm: fix vmx_set_nested_state_test vmx_set_nested_state_test is trying to use the KVM_STATE_NESTED_EVMCS without enabling enlightened VMCS first. Correct the outcome of the test, and actually test that it succeeds after the capability is enabled. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> | 15 August 2019, 07:16:03 UTC |
| 65efa61 | Paolo Bonzini | 14 August 2019, 16:02:41 UTC | selftests: kvm: provide common function to enable eVMCS There are two tests already enabling eVMCS and a third is coming. Add a function that enables the capability and tests the result. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> | 15 August 2019, 07:16:02 UTC |
| 92cd0f0 | Paolo Bonzini | 14 August 2019, 16:18:55 UTC | selftests: kvm: do not try running the VM in vmx_set_nested_state_test This test is only covering various edge cases of the KVM_SET_NESTED_STATE ioctl. Running the VM does not really add anything. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> | 15 August 2019, 07:16:01 UTC |
| c8e174b | Miaohe Lin | 12 August 2019, 02:33:00 UTC | KVM: x86: svm: remove redundant assignment of var new_entry new_entry is reassigned a new value next line. So it's redundant and remove it. Signed-off-by: Miaohe Lin <linmiaohe@huawei.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> | 14 August 2019, 14:28:36 UTC |
| ed4e7b0 | Paolo Bonzini | 09 August 2019, 07:30:02 UTC | MAINTAINERS: add KVM x86 reviewers This is probably overdue---KVM x86 has quite a few contributors that usually review each other's patches, which is really helpful to me. Formalize this by listing them as reviewers. I am including people with various expertise: - Joerg for SVM (with designated reviewers, it makes more sense to have him in the main KVM/x86 stanza) - Sean for MMU and VMX - Jim for VMX - Vitaly for Hyper-V and possibly SVM - Wanpeng for LAPIC and paravirtualization. Please ack if you are okay with this arrangement, otherwise speak up. In other news, Radim is going to leave Red Hat soon. However, he has not been very much involved in upstream KVM development for some time, and in the immediate future he is still going to help maintain kvm/queue while I am on vacation. Since not much is going to change, I will let him decide whether he wants to keep the maintainer role after he leaves. Acked-by: Joerg Roedel <joro@8bytes.org> Acked-by: Vitaly Kuznetsov <vkuznets@redhat.com> Acked-by: Wanpeng Li <wanpengli@tencent.com> Cc: Sean Christopherson <sean.j.christopherson@intel.com> Cc: Jim Mattson <jmattson@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> | 14 August 2019, 14:28:35 UTC |
| 74260dc | Paolo Bonzini | 09 August 2019, 07:18:43 UTC | MAINTAINERS: change list for KVM/s390 KVM/s390 does not have a list of its own, and linux-s390 is in the loop anyway thanks to the generic arch/s390 match. So use the generic KVM list for s390 patches. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> | 14 August 2019, 14:28:34 UTC |
| b14c876 | Radim Krcmar | 14 August 2019, 03:37:37 UTC | kvm: x86: skip populating logical dest map if apic is not sw enabled recalculate_apic_map does not santize ldr and it's possible that multiple bits are set. In that case, a previous valid entry can potentially be overwritten by an invalid one. This condition is hit when booting a 32 bit, >8 CPU, RHEL6 guest and then triggering a crash to boot a kdump kernel. This is the sequence of events: 1. Linux boots in bigsmp mode and enables PhysFlat, however, it still writes to the LDR which probably will never be used. 2. However, when booting into kdump, the stale LDR values remain as they are not cleared by the guest and there isn't a apic reset. 3. kdump boots with 1 cpu, and uses Logical Destination Mode but the logical map has been overwritten and points to an inactive vcpu. Signed-off-by: Radim Krcmar <rkrcmar@redhat.com> Signed-off-by: Bandan Das <bsd@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> | 14 August 2019, 14:28:33 UTC |
| a738b5e | Paolo Bonzini | 09 August 2019, 14:53:50 UTC | Merge tag 'kvmarm-fixes-for-5.3-2' of git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD KVM/arm fixes for 5.3, take #2 - Fix our system register reset so that we stop writing non-sensical values to them, and track which registers get reset instead. - Sync VMCR back from the GIC on WFI so that KVM has an exact vue of PMR. - Reevaluate state of HW-mapped, level triggered interrupts on enable. | 09 August 2019, 14:53:50 UTC |
| 0e1c438 | Paolo Bonzini | 09 August 2019, 14:53:39 UTC | Merge tag 'kvmarm-fixes-for-5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD KVM/arm fixes for 5.3 - A bunch of switch/case fall-through annotation, fixing one actual bug - Fix PMU reset bug - Add missing exception class debug strings | 09 August 2019, 14:53:39 UTC |
| c096397 | Naresh Kamboju | 07 August 2019, 13:58:14 UTC | selftests: kvm: Adding config fragments selftests kvm test cases need pre-required kernel configs for the test to get pass. Signed-off-by: Naresh Kamboju <naresh.kamboju@linaro.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> | 09 August 2019, 14:52:38 UTC |
| e2c2653 | Thomas Huth | 31 July 2019, 14:28:51 UTC | KVM: selftests: Update gitignore file for latest changes The kvm_create_max_vcpus test has been moved to the main directory, and sync_regs_test is now available on s390x, too. Signed-off-by: Thomas Huth <thuth@redhat.com> Acked-by: Shuah Khan <skhan@linuxfoundation.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> | 09 August 2019, 14:50:09 UTC |
| 8f946da | Paolo Bonzini | 05 August 2019, 09:11:08 UTC | kvm: remove unnecessary PageReserved check The same check is already done in kvm_is_reserved_pfn. Reviewed-by: Sean Christopherson <sean.j.christopherson@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> | 09 August 2019, 14:49:58 UTC |
| 16e604a | Alexandru Elisei | 07 August 2019, 09:53:20 UTC | KVM: arm/arm64: vgic: Reevaluate level sensitive interrupts on enable A HW mapped level sensitive interrupt asserted by a device will not be put into the ap_list if it is disabled at the VGIC level. When it is enabled again, it will be inserted into the ap_list and written to a list register on guest entry regardless of the state of the device. We could argue that this can also happen on real hardware, when the command to enable the interrupt reached the GIC before the device had the chance to de-assert the interrupt signal; however, we emulate the distributor and redistributors in software and we can do better than that. Signed-off-by: Alexandru Elisei <alexandru.elisei@arm.com> Signed-off-by: Marc Zyngier <maz@kernel.org> | 09 August 2019, 07:07:26 UTC |
| c69509c | Marc Zyngier | 05 August 2019, 09:34:51 UTC | KVM: arm: Don't write junk to CP15 registers on reset At the moment, the way we reset CP15 registers is mildly insane: We write junk to them, call the reset functions, and then check that we have something else in them. The "fun" thing is that this can happen while the guest is running (PSCI, for example). If anything in KVM has to evaluate the state of a CP15 register while junk is in there, bad thing may happen. Let's stop doing that. Instead, we track that we have called a reset function for that register, and assume that the reset function has done something. In the end, the very need of this reset check is pretty dubious, as it doesn't check everything (a lot of the CP15 reg leave outside of the cp15_regs[] array). It may well be axed in the near future. Signed-off-by: Marc Zyngier <maz@kernel.org> | 09 August 2019, 07:07:24 UTC |
| 03fdfb2 | Marc Zyngier | 05 August 2019, 09:34:51 UTC | KVM: arm64: Don't write junk to sysregs on reset At the moment, the way we reset system registers is mildly insane: We write junk to them, call the reset functions, and then check that we have something else in them. The "fun" thing is that this can happen while the guest is running (PSCI, for example). If anything in KVM has to evaluate the state of a system register while junk is in there, bad thing may happen. Let's stop doing that. Instead, we track that we have called a reset function for that register, and assume that the reset function has done something. This requires fixing a couple of sysreg refinition in the trap table. In the end, the very need of this reset check is pretty dubious, as it doesn't check everything (a lot of the sysregs leave outside of the sys_regs[] array). It may well be axed in the near future. Tested-by: Zenghui Yu <yuzenghui@huawei.com> Signed-off-by: Marc Zyngier <maz@kernel.org> | 09 August 2019, 07:07:07 UTC |
| 5eeaf10 | Marc Zyngier | 02 August 2019, 09:28:32 UTC | KVM: arm/arm64: Sync ICH_VMCR_EL2 back when about to block Since commit commit 328e56647944 ("KVM: arm/arm64: vgic: Defer touching GICH_VMCR to vcpu_load/put"), we leave ICH_VMCR_EL2 (or its GICv2 equivalent) loaded as long as we can, only syncing it back when we're scheduled out. There is a small snag with that though: kvm_vgic_vcpu_pending_irq(), which is indirectly called from kvm_vcpu_check_block(), needs to evaluate the guest's view of ICC_PMR_EL1. At the point were we call kvm_vcpu_check_block(), the vcpu is still loaded, and whatever changes to PMR is not visible in memory until we do a vcpu_put(). Things go really south if the guest does the following: mov x0, #0 // or any small value masking interrupts msr ICC_PMR_EL1, x0 [vcpu preempted, then rescheduled, VMCR sampled] mov x0, #ff // allow all interrupts msr ICC_PMR_EL1, x0 wfi // traps to EL2, so samping of VMCR [interrupt arrives just after WFI] Here, the hypervisor's view of PMR is zero, while the guest has enabled its interrupts. kvm_vgic_vcpu_pending_irq() will then say that no interrupts are pending (despite an interrupt being received) and we'll block for no reason. If the guest doesn't have a periodic interrupt firing once it has blocked, it will stay there forever. To avoid this unfortuante situation, let's resync VMCR from kvm_arch_vcpu_blocking(), ensuring that a following kvm_vcpu_check_block() will observe the latest value of PMR. This has been found by booting an arm64 Linux guest with the pseudo NMI feature, and thus using interrupt priorities to mask interrupts instead of the usual PSTATE masking. Cc: stable@vger.kernel.org # 4.12 Fixes: 328e56647944 ("KVM: arm/arm64: vgic: Defer touching GICH_VMCR to vcpu_load/put") Signed-off-by: Marc Zyngier <maz@kernel.org> | 05 August 2019, 14:36:46 UTC |
| 57b76bd | Paolo Bonzini | 25 July 2019, 10:59:40 UTC | x86: kvm: remove useless calls to kvm_para_available Most code in arch/x86/kernel/kvm.c is called through x86_hyper_kvm, and thus only runs if KVM has been detected. There is no need to check again for the CPUID base. Cc: Sergio Lopez <slp@redhat.com> Cc: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> | 05 August 2019, 10:55:50 UTC |
| 3e7093d | Greg KH | 31 July 2019, 18:56:20 UTC | KVM: no need to check return value of debugfs_create functions When calling debugfs functions, there is no need to ever check the return value. The function can work or not, but the code logic should never do something different based on this. Also, when doing this, change kvm_arch_create_vcpu_debugfs() to return void instead of an integer, as we should not care at all about if this function actually does anything or not. Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: "Radim Krčmář" <rkrcmar@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: Borislav Petkov <bp@alien8.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: <x86@kernel.org> Cc: <kvm@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> | 05 August 2019, 10:55:49 UTC |
| 741cbba | Paolo Bonzini | 03 August 2019, 06:14:25 UTC | KVM: remove kvm_arch_has_vcpu_debugfs() There is no need for this function as all arches have to implement kvm_arch_create_vcpu_debugfs() no matter what. A #define symbol let us actually simplify the code. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> | 05 August 2019, 10:55:48 UTC |
| 17e433b | Wanpeng Li | 05 August 2019, 02:03:19 UTC | KVM: Fix leak vCPU's VMCS value into other pCPU After commit d73eb57b80b (KVM: Boost vCPUs that are delivering interrupts), a five years old bug is exposed. Running ebizzy benchmark in three 80 vCPUs VMs on one 80 pCPUs Skylake server, a lot of rcu_sched stall warning splatting in the VMs after stress testing: INFO: rcu_sched detected stalls on CPUs/tasks: { 4 41 57 62 77} (detected by 15, t=60004 jiffies, g=899, c=898, q=15073) Call Trace: flush_tlb_mm_range+0x68/0x140 tlb_flush_mmu.part.75+0x37/0xe0 tlb_finish_mmu+0x55/0x60 zap_page_range+0x142/0x190 SyS_madvise+0x3cd/0x9c0 system_call_fastpath+0x1c/0x21 swait_active() sustains to be true before finish_swait() is called in kvm_vcpu_block(), voluntarily preempted vCPUs are taken into account by kvm_vcpu_on_spin() loop greatly increases the probability condition kvm_arch_vcpu_runnable(vcpu) is checked and can be true, when APICv is enabled the yield-candidate vCPU's VMCS RVI field leaks(by vmx_sync_pir_to_irr()) into spinning-on-a-taken-lock vCPU's current VMCS. This patch fixes it by checking conservatively a subset of events. Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Radim Krčmář <rkrcmar@redhat.com> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: Marc Zyngier <Marc.Zyngier@arm.com> Cc: stable@vger.kernel.org Fixes: 98f4a1467 (KVM: add kvm_arch_vcpu_runnable() test to kvm_vcpu_on_spin() loop) Signed-off-by: Wanpeng Li <wanpengli@tencent.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> | 05 August 2019, 10:55:47 UTC |
| 046ddee | Wanpeng Li | 01 August 2019, 03:30:14 UTC | KVM: Check preempted_in_kernel for involuntary preemption preempted_in_kernel is updated in preempt_notifier when involuntary preemption ocurrs, it can be stale when the voluntarily preempted vCPUs are taken into account by kvm_vcpu_on_spin() loop. This patch lets it just check preempted_in_kernel for involuntary preemption. Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Radim Krčmář <rkrcmar@redhat.com> Signed-off-by: Wanpeng Li <wanpengli@tencent.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> | 05 August 2019, 10:55:46 UTC |
| a48d06f | Wanpeng Li | 01 August 2019, 03:30:13 UTC | KVM: LAPIC: Don't need to wakeup vCPU twice afer timer fire kvm_set_pending_timer() will take care to wake up the sleeping vCPU which has pending timer, don't need to check this in apic_timer_expired() again. Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Radim Krčmář <rkrcmar@redhat.com> Signed-off-by: Wanpeng Li <wanpengli@tencent.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> | 05 August 2019, 10:55:45 UTC |
| cdb2d3e | Anders Roxell | 26 July 2019, 11:27:10 UTC | arm64: KVM: hyp: debug-sr: Mark expected switch fall-through When fall-through warnings was enabled by default the following warnings was starting to show up: ../arch/arm64/kvm/hyp/debug-sr.c: In function ‘__debug_save_state’: ../arch/arm64/kvm/hyp/debug-sr.c:20:19: warning: this statement may fall through [-Wimplicit-fallthrough=] case 15: ptr[15] = read_debug(reg, 15); \ ../arch/arm64/kvm/hyp/debug-sr.c:113:2: note: in expansion of macro ‘save_debug’ save_debug(dbg->dbg_bcr, dbgbcr, brps); ^~~~~~~~~~ ../arch/arm64/kvm/hyp/debug-sr.c:21:2: note: here case 14: ptr[14] = read_debug(reg, 14); \ ^~~~ ../arch/arm64/kvm/hyp/debug-sr.c:113:2: note: in expansion of macro ‘save_debug’ save_debug(dbg->dbg_bcr, dbgbcr, brps); ^~~~~~~~~~ ../arch/arm64/kvm/hyp/debug-sr.c:21:19: warning: this statement may fall through [-Wimplicit-fallthrough=] case 14: ptr[14] = read_debug(reg, 14); \ ../arch/arm64/kvm/hyp/debug-sr.c:113:2: note: in expansion of macro ‘save_debug’ save_debug(dbg->dbg_bcr, dbgbcr, brps); ^~~~~~~~~~ ../arch/arm64/kvm/hyp/debug-sr.c:22:2: note: here case 13: ptr[13] = read_debug(reg, 13); \ ^~~~ ../arch/arm64/kvm/hyp/debug-sr.c:113:2: note: in expansion of macro ‘save_debug’ save_debug(dbg->dbg_bcr, dbgbcr, brps); ^~~~~~~~~~ Rework to add a 'Fall through' comment where the compiler warned about fall-through, hence silencing the warning. Fixes: d93512ef0f0e ("Makefile: Globally enable fall-through warning") Signed-off-by: Anders Roxell <anders.roxell@linaro.org> [maz: fixed commit message] Signed-off-by: Marc Zyngier <maz@kernel.org> | 29 July 2019, 10:01:37 UTC |
| 6701c61 | Zenghui Yu | 13 July 2019, 04:40:54 UTC | KVM: arm64: Update kvm_arm_exception_class and esr_class_str for new EC We've added two ESR exception classes for new ARM hardware extensions: ESR_ELx_EC_PAC and ESR_ELx_EC_SVE, but failed to update the strings used in tracing and other debug. Let's update "kvm_arm_exception_class" for these two EC, which the new EC will be visible to user-space via kvm_exit trace events Also update to "esr_class_str" for ESR_ELx_EC_PAC, by which we can get more readable debug info. Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Will Deacon <will@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Dave Martin <Dave.Martin@arm.com> Reviewed-by: James Morse <james.morse@arm.com> Signed-off-by: Zenghui Yu <yuzenghui@huawei.com> Signed-off-by: Marc Zyngier <maz@kernel.org> | 26 July 2019, 14:40:38 UTC |
| 1a8248c | Anders Roxell | 26 July 2019, 11:28:31 UTC | KVM: arm: vgic-v3: Mark expected switch fall-through When fall-through warnings was enabled by default the following warnings was starting to show up: ../virt/kvm/arm/hyp/vgic-v3-sr.c: In function ‘__vgic_v3_save_aprs’: ../virt/kvm/arm/hyp/vgic-v3-sr.c:351:24: warning: this statement may fall through [-Wimplicit-fallthrough=] cpu_if->vgic_ap0r[2] = __vgic_v3_read_ap0rn(2); ~~~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~ ../virt/kvm/arm/hyp/vgic-v3-sr.c:352:2: note: here case 6: ^~~~ ../virt/kvm/arm/hyp/vgic-v3-sr.c:353:24: warning: this statement may fall through [-Wimplicit-fallthrough=] cpu_if->vgic_ap0r[1] = __vgic_v3_read_ap0rn(1); ~~~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~ ../virt/kvm/arm/hyp/vgic-v3-sr.c:354:2: note: here default: ^~~~~~~ Rework so that the compiler doesn't warn about fall-through. Fixes: d93512ef0f0e ("Makefile: Globally enable fall-through warning") Signed-off-by: Anders Roxell <anders.roxell@linaro.org> Signed-off-by: Marc Zyngier <maz@kernel.org> | 26 July 2019, 14:37:11 UTC |
| 3d584a3 | Anders Roxell | 26 July 2019, 11:27:05 UTC | arm64: KVM: regmap: Fix unexpected switch fall-through When fall-through warnings was enabled by default, commit d93512ef0f0e ("Makefile: Globally enable fall-through warning"), the following warnings was starting to show up: In file included from ../arch/arm64/include/asm/kvm_emulate.h:19, from ../arch/arm64/kvm/regmap.c:13: ../arch/arm64/kvm/regmap.c: In function ‘vcpu_write_spsr32’: ../arch/arm64/include/asm/kvm_hyp.h:31:3: warning: this statement may fall through [-Wimplicit-fallthrough=] asm volatile(ALTERNATIVE(__msr_s(r##nvh, "%x0"), \ ^~~ ../arch/arm64/include/asm/kvm_hyp.h:46:31: note: in expansion of macro ‘write_sysreg_elx’ #define write_sysreg_el1(v,r) write_sysreg_elx(v, r, _EL1, _EL12) ^~~~~~~~~~~~~~~~ ../arch/arm64/kvm/regmap.c:180:3: note: in expansion of macro ‘write_sysreg_el1’ write_sysreg_el1(v, SYS_SPSR); ^~~~~~~~~~~~~~~~ ../arch/arm64/kvm/regmap.c:181:2: note: here case KVM_SPSR_ABT: ^~~~ In file included from ../arch/arm64/include/asm/cputype.h:132, from ../arch/arm64/include/asm/cache.h:8, from ../include/linux/cache.h:6, from ../include/linux/printk.h:9, from ../include/linux/kernel.h:15, from ../include/asm-generic/bug.h:18, from ../arch/arm64/include/asm/bug.h:26, from ../include/linux/bug.h:5, from ../include/linux/mmdebug.h:5, from ../include/linux/mm.h:9, from ../arch/arm64/kvm/regmap.c:11: ../arch/arm64/include/asm/sysreg.h:837:2: warning: this statement may fall through [-Wimplicit-fallthrough=] asm volatile("msr " __stringify(r) ", %x0" \ ^~~ ../arch/arm64/kvm/regmap.c:182:3: note: in expansion of macro ‘write_sysreg’ write_sysreg(v, spsr_abt); ^~~~~~~~~~~~ ../arch/arm64/kvm/regmap.c:183:2: note: here case KVM_SPSR_UND: ^~~~ Rework to add a 'break;' in the swich-case since it didn't have that, leading to an interresting set of bugs. Cc: stable@vger.kernel.org # v4.17+ Fixes: a892819560c4 ("KVM: arm64: Prepare to handle deferred save/restore of 32-bit registers") Signed-off-by: Anders Roxell <anders.roxell@linaro.org> [maz: reworked commit message, fixed stable range] Signed-off-by: Marc Zyngier <maz@kernel.org> | 26 July 2019, 14:33:41 UTC |
| 266e85a | Wanpeng Li | 24 July 2019, 09:43:13 UTC | KVM: X86: Boost queue head vCPU to mitigate lock waiter preemption Commit 11752adb (locking/pvqspinlock: Implement hybrid PV queued/unfair locks) introduces hybrid PV queued/unfair locks - queued mode (no starvation) - unfair mode (good performance on not heavily contended lock) The lock waiter goes into the unfair mode especially in VMs with over-commit vCPUs since increaing over-commitment increase the likehood that the queue head vCPU may have been preempted and not actively spinning. However, reschedule queue head vCPU timely to acquire the lock still can get better performance than just depending on lock stealing in over-subscribe scenario. Testing on 80 HT 2 socket Xeon Skylake server, with 80 vCPUs VM 80GB RAM: ebizzy -M vanilla boosting improved 1VM 23520 25040 6% 2VM 8000 13600 70% 3VM 3100 5400 74% The lock holder vCPU yields to the queue head vCPU when unlock, to boost queue head vCPU which is involuntary preemption or the one which is voluntary halt due to fail to acquire the lock after a short spin in the guest. Cc: Waiman Long <longman@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Radim Krčmář <rkrcmar@redhat.com> Signed-off-by: Wanpeng Li <wanpengli@tencent.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> | 24 July 2019, 11:56:53 UTC |
| 2f5947d | Christoph Hellwig | 24 July 2019, 07:24:49 UTC | Documentation: move Documentation/virtual to Documentation/virt Renaming docs seems to be en vogue at the moment, so fix on of the grossly misnamed directories. We usually never use "virtual" as a shortcut for virtualization in the kernel, but always virt, as seen in the virt/ top-level directory. Fix up the documentation to match that. Fixes: ed16648eb5b8 ("Move kvm, uml, and lguest subdirectories under a common "virtual" directory, I.E:") Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> | 24 July 2019, 08:52:11 UTC |
| bca031e | Zenghui Yu | 18 July 2019, 08:15:10 UTC | KVM: arm/arm64: Introduce kvm_pmu_vcpu_init() to setup PMU counter index We use "pmc->idx" and the "chained" bitmap to determine if the pmc is chained, in kvm_pmu_pmc_is_chained(). But idx might be uninitialized (and random) when we doing this decision, through a KVM_ARM_VCPU_INIT ioctl -> kvm_pmu_vcpu_reset(). And the test_bit() against this random idx will potentially hit a KASAN BUG [1]. In general, idx is the static property of a PMU counter that is not expected to be modified across resets, as suggested by Julien. It looks more reasonable if we can setup the PMU counter idx for a vcpu in its creation time. Introduce a new function - kvm_pmu_vcpu_init() for this basic setup. Oh, and the KASAN BUG will get fixed this way. [1] https://www.spinics.net/lists/kvm-arm/msg36700.html Fixes: 80f393a23be6 ("KVM: arm/arm64: Support chained PMU counters") Suggested-by: Andrew Murray <andrew.murray@arm.com> Suggested-by: Julien Thierry <julien.thierry@arm.com> Acked-by: Julien Thierry <julien.thierry@arm.com> Signed-off-by: Zenghui Yu <yuzenghui@huawei.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> | 23 July 2019, 08:23:44 UTC |
| c6bf2ae | Jan Kiszka | 21 July 2019, 14:01:36 UTC | KVM: nVMX: Set cached_vmcs12 and cached_shadow_vmcs12 NULL after free Shall help finding use-after-free bugs earlier. Suggested-by: Liran Alon <liran.alon@oracle.com> Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> | 22 July 2019, 11:55:49 UTC |
| d9a710e | Wanpeng Li | 22 July 2019, 04:26:21 UTC | KVM: X86: Dynamically allocate user_fpu After reverting commit 240c35a3783a (kvm: x86: Use task structs fpu field for user), struct kvm_vcpu is 19456 bytes on my server, PAGE_ALLOC_COSTLY_ORDER(3) is the order at which allocations are deemed costly to service. In serveless scenario, one host can service hundreds/thoudands firecracker/kata-container instances, howerver, new instance will fail to launch after memory is too fragmented to allocate kvm_vcpu struct on host, this was observed in some cloud provider product environments. This patch dynamically allocates user_fpu, kvm_vcpu is 15168 bytes now on my Skylake server. Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Radim Krčmář <rkrcmar@redhat.com> Signed-off-by: Wanpeng Li <wanpengli@tencent.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> | 22 July 2019, 11:55:48 UTC |
| e751732 | Wanpeng Li | 22 July 2019, 04:26:20 UTC | KVM: X86: Fix fpu state crash in kvm guest The idea before commit 240c35a37 (which has just been reverted) was that we have the following FPU states: userspace (QEMU) guest --------------------------------------------------------------------------- processor vcpu->arch.guest_fpu >>> KVM_RUN: kvm_load_guest_fpu vcpu->arch.user_fpu processor >>> preempt out vcpu->arch.user_fpu current->thread.fpu >>> preempt in vcpu->arch.user_fpu processor >>> back to userspace >>> kvm_put_guest_fpu processor vcpu->arch.guest_fpu --------------------------------------------------------------------------- With the new lazy model we want to get the state back to the processor when schedule in from current->thread.fpu. Reported-by: Thomas Lambertz <mail@thomaslambertz.de> Reported-by: anthony <antdev66@gmail.com> Tested-by: anthony <antdev66@gmail.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Radim Krčmář <rkrcmar@redhat.com> Cc: Thomas Lambertz <mail@thomaslambertz.de> Cc: anthony <antdev66@gmail.com> Cc: stable@vger.kernel.org Fixes: 5f409e20b (x86/fpu: Defer FPU state load until return to userspace) Signed-off-by: Wanpeng Li <wanpengli@tencent.com> [Add a comment in front of the warning. - Paolo] Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> | 22 July 2019, 11:55:47 UTC |
| ec26947 | Paolo Bonzini | 22 July 2019, 11:31:27 UTC | Revert "kvm: x86: Use task structs fpu field for user" This reverts commit 240c35a3783ab9b3a0afaba0dde7291295680a6b ("kvm: x86: Use task structs fpu field for user", 2018-11-06). The commit is broken and causes QEMU's FPU state to be destroyed when KVM_RUN is preempted. Fixes: 240c35a3783a ("kvm: x86: Use task structs fpu field for user") Cc: stable@vger.kernel.org Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> | 22 July 2019, 11:55:47 UTC |
| cf64527 | Jan Kiszka | 21 July 2019, 11:52:18 UTC | KVM: nVMX: Clear pending KVM_REQ_GET_VMCS12_PAGES when leaving nested Letting this pend may cause nested_get_vmcs12_pages to run against an invalid state, corrupting the effective vmcs of L1. This was triggerable in QEMU after a guest corruption in L2, followed by a L1 reset. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Reviewed-by: Liran Alon <liran.alon@oracle.com> Cc: stable@vger.kernel.org Fixes: 7f7f1ba33cf2 ("KVM: x86: do not load vmcs12 pages while still in SMM") Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> | 22 July 2019, 11:55:46 UTC |
| 5f9e832 | Linus Torvalds | 21 July 2019, 21:05:38 UTC | Linus 5.3-rc1 | 21 July 2019, 21:05:38 UTC |
| c7bf0a0 | Linus Torvalds | 21 July 2019, 17:28:39 UTC | Merge tag 'devicetree-fixes-for-5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux Pull Devicetree fixes from Rob Herring: "Fix several warnings/errors in validation of binding schemas" * tag 'devicetree-fixes-for-5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: dt-bindings: pinctrl: stm32: Fix missing 'clocks' property in examples dt-bindings: iio: ad7124: Fix dtc warnings in example dt-bindings: iio: avia-hx711: Fix avdd-supply typo in example dt-bindings: pinctrl: aspeed: Fix AST2500 example errors dt-bindings: pinctrl: aspeed: Fix 'compatible' schema errors dt-bindings: riscv: Limit cpus schema to only check RiscV 'cpu' nodes dt-bindings: Ensure child nodes are of type 'object' | 21 July 2019, 17:28:39 UTC |
| d6788eb | Linus Torvalds | 21 July 2019, 17:09:43 UTC | Merge branch 'work.misc' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull vfs documentation typo fix from Al Viro. * 'work.misc' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: typo fix: it's d_make_root, not d_make_inode... | 21 July 2019, 17:09:43 UTC |
| 91962d0 | Linus Torvalds | 21 July 2019, 17:01:17 UTC | Merge tag '5.3-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6 Pull cifs fixes from Steve French: "Two fixes for stable, one that had dependency on earlier patch in this merge window and can now go in, and a perf improvement in SMB3 open" * tag '5.3-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6: cifs: update internal module number cifs: flush before set-info if we have writeable handles smb3: optimize open to not send query file internal info cifs: copy_file_range needs to strip setuid bits and update timestamps CIFS: fix deadlock in cached root handling | 21 July 2019, 17:01:17 UTC |
| 8cf6650 | Qian Cai | 11 July 2019, 16:17:45 UTC | iommu/amd: fix a crash in iova_magazine_free_pfns The commit b3aa14f02254 ("iommu: remove the mapping_error dma_map_ops method") incorrectly changed the checking from dma_ops_alloc_iova() in map_sg() causes a crash under memory pressure as dma_ops_alloc_iova() never return DMA_MAPPING_ERROR on failure but 0, so the error handling is all wrong. kernel BUG at drivers/iommu/iova.c:801! Workqueue: kblockd blk_mq_run_work_fn RIP: 0010:iova_magazine_free_pfns+0x7d/0xc0 Call Trace: free_cpu_cached_iovas+0xbd/0x150 alloc_iova_fast+0x8c/0xba dma_ops_alloc_iova.isra.6+0x65/0xa0 map_sg+0x8c/0x2a0 scsi_dma_map+0xc6/0x160 pqi_aio_submit_io+0x1f6/0x440 [smartpqi] pqi_scsi_queue_command+0x90c/0xdd0 [smartpqi] scsi_queue_rq+0x79c/0x1200 blk_mq_dispatch_rq_list+0x4dc/0xb70 blk_mq_sched_dispatch_requests+0x249/0x310 __blk_mq_run_hw_queue+0x128/0x200 blk_mq_run_work_fn+0x27/0x30 process_one_work+0x522/0xa10 worker_thread+0x63/0x5b0 kthread+0x1d2/0x1f0 ret_from_fork+0x22/0x40 Fixes: b3aa14f02254 ("iommu: remove the mapping_error dma_map_ops method") Signed-off-by: Qian Cai <cai@lca.pw> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 21 July 2019, 16:57:13 UTC |
| 618381f | Mike Rapoport | 30 April 2019, 14:27:50 UTC | hexagon: switch to generic version of pte allocation The hexagon implementation pte_alloc_one(), pte_alloc_one_kernel(), pte_free_kernel() and pte_free() is identical to the generic except of lack of __GFP_ACCOUNT for the user PTEs allocation. Switch hexagon to use generic version of these functions. Signed-off-by: Mike Rapoport <rppt@linux.ibm.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 21 July 2019, 16:53:00 UTC |
| bec5545 | Linus Torvalds | 21 July 2019, 16:46:59 UTC | Merge tag 'ntb-5.3' of git://github.com/jonmason/ntb Pull NTB updates from Jon Mason: "New feature to add support for NTB virtual MSI interrupts, the ability to test and use this feature in the NTB transport layer. Also, bug fixes for the AMD and Switchtec drivers, as well as some general patches" * tag 'ntb-5.3' of git://github.com/jonmason/ntb: (22 commits) NTB: Describe the ntb_msi_test client in the documentation. NTB: Add MSI interrupt support to ntb_transport NTB: Add ntb_msi_test support to ntb_test NTB: Introduce NTB MSI Test Client NTB: Introduce MSI library NTB: Rename ntb.c to support multiple source files in the module NTB: Introduce functions to calculate multi-port resource index NTB: Introduce helper functions to calculate logical port number PCI/switchtec: Add module parameter to request more interrupts PCI/MSI: Support allocating virtual MSI interrupts ntb_hw_switchtec: Fix setup MW with failure bug ntb_hw_switchtec: Skip unnecessary re-setup of shared memory window for crosslink case ntb_hw_switchtec: Remove redundant steps of switchtec_ntb_reinit_peer() function NTB: correct ntb_dev_ops and ntb_dev comment typos NTB: amd: Silence shift wrapping warning in amd_ntb_db_vector_mask() ntb_hw_switchtec: potential shift wrapping bug in switchtec_ntb_init_sndev() NTB: ntb_transport: Ensure qp->tx_mw_dma_addr is initaliazed NTB: ntb_hw_amd: set peer limit register NTB: ntb_perf: Clear stale values in doorbell and command SPAD register NTB: ntb_perf: Disable NTB link after clearing peer XLAT registers ... | 21 July 2019, 16:46:59 UTC |
| 1b03bc5 | Al Viro | 21 July 2019, 03:17:30 UTC | typo fix: it's d_make_root, not d_make_inode... Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> | 21 July 2019, 03:17:30 UTC |
| e2297f7 | Rob Herring | 16 July 2019, 21:34:40 UTC | dt-bindings: pinctrl: stm32: Fix missing 'clocks' property in examples Now that examples are validated against the DT schema, an error with required 'clocks' property missing is exposed: Documentation/devicetree/bindings/pinctrl/st,stm32-pinctrl.example.dt.yaml: \ pinctrl@40020000: gpio@0: 'clocks' is a required property Documentation/devicetree/bindings/pinctrl/st,stm32-pinctrl.example.dt.yaml: \ pinctrl@50020000: gpio@1000: 'clocks' is a required property Documentation/devicetree/bindings/pinctrl/st,stm32-pinctrl.example.dt.yaml: \ pinctrl@50020000: gpio@2000: 'clocks' is a required property Add the missing 'clocks' properties to the examples to fix the errors. Fixes: 2c9239c125f0 ("dt-bindings: pinctrl: Convert stm32 pinctrl bindings to json-schema") Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com> Cc: linux-gpio@vger.kernel.org Cc: linux-stm32@st-md-mailman.stormreply.com Acked-by: Alexandre TORGUE <alexandre.torgue@st.com> Signed-off-by: Rob Herring <robh@kernel.org> | 21 July 2019, 02:28:53 UTC |
| 20051f5 | Rob Herring | 16 July 2019, 20:21:56 UTC | dt-bindings: iio: ad7124: Fix dtc warnings in example With the conversion to DT schema, the examples are now compiled with dtc. The ad7124 binding example has the following warning: Documentation/devicetree/bindings/iio/adc/adi,ad7124.example.dts:19.11-21: \ Warning (reg_format): /example-0/adc@0:reg: property has invalid length (4 bytes) (#address-cells == 1, #size-cells == 1) There's a default #size-cells and #address-cells values of 1 for examples. For examples needing different values such as this one on a SPI bus, they need to provide a SPI bus parent node. Fixes: 26ae15e62d3c ("Convert AD7124 bindings documentation to YAML format.") Cc: Jonathan Cameron <jic23@kernel.org> Cc: linux-iio@vger.kernel.org Signed-off-by: Rob Herring <robh@kernel.org> | 21 July 2019, 02:28:52 UTC |
| fbbf2b6 | Rob Herring | 16 July 2019, 20:13:29 UTC | dt-bindings: iio: avia-hx711: Fix avdd-supply typo in example Now that examples are validated against the DT schema, a typo in avia-hx711 example generates a warning: Documentation/devicetree/bindings/iio/adc/avia-hx711.example.dt.yaml: weight: 'avdd-supply' is a required property Fix the typo. Fixes: 5150ec3fe125 ("avia-hx711.yaml: transform DT binding to YAML") Cc: Andreas Klinger <ak@it-klinger.de> Cc: Jonathan Cameron <jic23@kernel.org> Cc: linux-iio@vger.kernel.org Signed-off-by: Rob Herring <robh@kernel.org> | 21 July 2019, 02:28:52 UTC |
| fcbe7e3 | Rob Herring | 15 July 2019, 22:48:41 UTC | dt-bindings: pinctrl: aspeed: Fix AST2500 example errors The schema examples are now validated against the schema itself. The AST2500 pinctrl schema has a couple of errors: Documentation/devicetree/bindings/pinctrl/aspeed,ast2500-pinctrl.example.dt.yaml: \ example-0: $nodename:0: 'example-0' does not match '^(bus|soc|axi|ahb|apb)(@[0-9a-f]+)?$' Documentation/devicetree/bindings/pinctrl/aspeed,ast2500-pinctrl.example.dt.yaml: \ pinctrl: aspeed,external-nodes: [[1, 2]] is too short Fixes: 0a617de16730 ("dt-bindings: pinctrl: aspeed: Convert AST2500 bindings to json-schema") Cc: Andrew Jeffery <andrew@aj.id.au> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Joel Stanley <joel@jms.id.au> Cc: linux-aspeed@lists.ozlabs.org Cc: linux-gpio@vger.kernel.org Cc: linux-arm-kernel@lists.infradead.org Acked-by: Andrew Jeffery <andrew@aj.id.au> Signed-off-by: Rob Herring <robh@kernel.org> | 21 July 2019, 02:28:52 UTC |
| ad21a4c | Rob Herring | 15 July 2019, 22:37:25 UTC | dt-bindings: pinctrl: aspeed: Fix 'compatible' schema errors The Aspeed pinctl schema have errors in the 'compatible' schema: Documentation/devicetree/bindings/pinctrl/aspeed,ast2400-pinctrl.yaml: \ properties:compatible:enum: ['aspeed', 'ast2400-pinctrl', 'aspeed', 'g4-pinctrl'] has non-unique elements Documentation/devicetree/bindings/pinctrl/aspeed,ast2500-pinctrl.yaml: \ properties:compatible:enum: ['aspeed', 'ast2500-pinctrl', 'aspeed', 'g5-pinctrl'] has non-unique elements Flow style sequences have to be quoted if the vales contain ','. Fix this by using the more common one line per entry formatting. Fixes: 0a617de16730 ("dt-bindings: pinctrl: aspeed: Convert AST2500 bindings to json-schema") Fixes: 07457937bb5c ("dt-bindings: pinctrl: aspeed: Convert AST2400 bindings to json-schema") Cc: Andrew Jeffery <andrew@aj.id.au> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Joel Stanley <joel@jms.id.au> Cc: linux-aspeed@lists.ozlabs.org Cc: linux-gpio@vger.kernel.org Cc: linux-arm-kernel@lists.infradead.org Acked-by: Andrew Jeffery <andrew@aj.id.au> Signed-off-by: Rob Herring <robh@kernel.org> | 21 July 2019, 02:28:52 UTC |
| 7d9ef7f | Rob Herring | 26 June 2019, 23:57:59 UTC | dt-bindings: riscv: Limit cpus schema to only check RiscV 'cpu' nodes Matching on the 'cpus' node was a bad choice because the schema is incorrectly applied to non-RiscV cpus nodes. As we now have a common cpus schema which checks the general structure, it is also redundant to do so in the Risc-V CPU schema. The downside is one could conceivably mix different architecture's cpu nodes or have typos in the compatible string. The latter problem pretty much exists for every schema. Acked-by: Paul Walmsley <paul.walmsley@sifive.com> Signed-off-by: Rob Herring <robh@kernel.org> | 21 July 2019, 02:28:52 UTC |
| 15ffef1 | Rob Herring | 03 July 2019, 20:17:06 UTC | dt-bindings: Ensure child nodes are of type 'object' Properties which are child node definitions need to have an explict type. Otherwise, a matching (DT) property can silently match when an error is desired. Fix this up tree-wide. Once this is fixed, the meta-schema will enforce this on any child node definitions. Cc: Chen-Yu Tsai <wens@csie.org> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Brian Norris <computersforpeace@gmail.com> Cc: Marek Vasut <marek.vasut@gmail.com> Cc: Richard Weinberger <richard@nod.at> Cc: Vignesh Raghavendra <vigneshr@ti.com> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com> Cc: linux-mtd@lists.infradead.org Cc: linux-gpio@vger.kernel.org Cc: linux-stm32@st-md-mailman.stormreply.com Cc: linux-spi@vger.kernel.org Acked-by: Miquel Raynal <miquel.raynal@bootlin.com> Acked-by: Maxime Ripard <maxime.ripard@bootlin.com> Acked-by: Mark Brown <broonie@kernel.org> Acked-by: Alexandre TORGUE <alexandre.torgue@st.com> Signed-off-by: Rob Herring <robh@kernel.org> | 21 July 2019, 02:27:29 UTC |
| f1a3b43 | Linus Torvalds | 20 July 2019, 19:22:30 UTC | Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Pull more input updates from Dmitry Torokhov: - Apple SPI keyboard and trackpad driver for newer Macs - ALPS driver will ignore trackpoint-only devices to give the trackpoint driver a chance to handle them properly - another Lenovo is switched over to SMbus from PS/2 - assorted driver fixups. * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: alps - fix a mismatch between a condition check and its comment Input: psmouse - fix build error of multiple definition Input: applespi - remove set but not used variables 'sts' Input: add Apple SPI keyboard and trackpad driver Input: alps - don't handle ALPS cs19 trackpoint-only device Input: hyperv-keyboard - remove dependencies on PAGE_SIZE for ring buffer Input: adp5589 - initialize GPIO controller parent device Input: iforce - remove empty multiline comments Input: synaptics - fix misuse of strlcpy Input: auo-pixcir-ts - switch to using devm_add_action_or_reset() Input: gtco - bounds check collection indent level Input: mtk-pmic-keys - add of_node_put() before return Input: sun4i-lradc-keys - add of_node_put() before return Input: synaptics - whitelist Lenovo T580 SMBus intertouch | 20 July 2019, 19:22:30 UTC |
| ac60602 | Linus Torvalds | 20 July 2019, 19:09:52 UTC | Merge tag 'dma-mapping-5.3-1' of git://git.infradead.org/users/hch/dma-mapping Pull dma-mapping fixes from Christoph Hellwig: "Fix various regressions: - force unencrypted dma-coherent buffers if encryption bit can't fit into the dma coherent mask (Tom Lendacky) - avoid limiting request size if swiotlb is not used (me) - fix swiotlb handling in dma_direct_sync_sg_for_cpu/device (Fugang Duan)" * tag 'dma-mapping-5.3-1' of git://git.infradead.org/users/hch/dma-mapping: dma-direct: correct the physical addr in dma_direct_sync_sg_for_cpu/device dma-direct: only limit the mapping size if swiotlb could be used dma-mapping: add a dma_addressing_limited helper dma-direct: Force unencrypted DMA under SME for certain DMA masks | 20 July 2019, 19:09:52 UTC |
| c6dd78f | Linus Torvalds | 20 July 2019, 18:24:49 UTC | Merge branch 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fixes from Thomas Gleixner: "A set of x86 specific fixes and updates: - The CR2 corruption fixes which store CR2 early in the entry code and hand the stored address to the fault handlers. - Revert a forgotten leftover of the dropped FSGSBASE series. - Plug a memory leak in the boot code. - Make the Hyper-V assist functionality robust by zeroing the shadow page. - Remove a useless check for dead processes with LDT - Update paravirt and VMware maintainers entries. - A few cleanup patches addressing various compiler warnings" * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/entry/64: Prevent clobbering of saved CR2 value x86/hyper-v: Zero out the VP ASSIST PAGE on allocation x86, boot: Remove multiple copy of static function sanitize_boot_params() x86/boot/compressed/64: Remove unused variable x86/boot/efi: Remove unused variables x86/mm, tracing: Fix CR2 corruption x86/entry/64: Update comments and sanity tests for create_gap x86/entry/64: Simplify idtentry a little x86/entry/32: Simplify common_exception x86/paravirt: Make read_cr2() CALLEE_SAVE MAINTAINERS: Update PARAVIRT_OPS_INTERFACE and VMWARE_HYPERVISOR_INTERFACE x86/process: Delete useless check for dead process with LDT x86: math-emu: Hide clang warnings for 16-bit overflow x86/e820: Use proper booleans instead of 0/1 x86/apic: Silence -Wtype-limits compiler warnings x86/mm: Free sme_early_buffer after init x86/boot: Fix memory leak in default_get_smp_config() Revert "x86/ptrace: Prevent ptrace from clearing the FS/GS selector" and fix the test | 20 July 2019, 18:24:49 UTC |
| 46f5c0c | Linus Torvalds | 20 July 2019, 18:06:12 UTC | Merge branch 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull perf tooling updates from Thomas Gleixner: "A set of perf improvements and fixes: perf db-export: - Improvements in how COMM details are exported to databases for post processing and use in the sql-viewer.py UI. - Export switch events to the database. BPF: - Bump rlimit(MEMLOCK) for 'perf test bpf' and 'perf trace', just like selftests/bpf/bpf_rlimit.h do, which makes errors due to exhaustion of this limit, which are kinda cryptic (EPERM sometimes) less frequent. perf version: - Fix segfault due to missing OPT_END(), noticed on PowerPC. perf vendor events: - Add JSON files for IBM s/390 machine type 8561. perf cs-etm (ARM): - Fix two cases of error returns not bing done properly: Invalid ERR_PTR() use and loss of propagation error codes" * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (28 commits) perf version: Fix segfault due to missing OPT_END() perf vendor events s390: Add JSON files for machine type 8561 perf cs-etm: Return errcode in cs_etm__process_auxtrace_info() perf cs-etm: Remove errnoeous ERR_PTR() usage in cs_etm__process_auxtrace_info perf scripts python: export-to-postgresql.py: Export switch events perf scripts python: export-to-sqlite.py: Export switch events perf db-export: Export switch events perf db-export: Factor out db_export__threads() perf script: Add scripting operation process_switch() perf scripts python: exported-sql-viewer.py: Use new 'has_calls' column perf scripts python: exported-sql-viewer.py: Remove redundant semi-colons perf scripts python: export-to-postgresql.py: Add has_calls column to comms table perf scripts python: export-to-sqlite.py: Add has_calls column to comms table perf db-export: Also export thread's current comm perf db-export: Factor out db_export__comm() perf scripts python: export-to-postgresql.py: Export comm details perf scripts python: export-to-sqlite.py: Export comm details perf db-export: Export comm details perf db-export: Fix a white space issue in db_export__sample() perf db-export: Move export__comm_thread into db_export__sample() ... | 20 July 2019, 18:06:12 UTC |
| e6023ad | Linus Torvalds | 20 July 2019, 17:45:15 UTC | Merge branch 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull core fixes from Thomas Gleixner: - A collection of objtool fixes which address recent fallout partially exposed by newer toolchains, clang, BPF and general code changes. - Force USER_DS for user stack traces [ Note: the "objtool fixes" are not all to objtool itself, but for kernel code that triggers objtool warnings. Things like missing function size annotations, or code that confuses the unwinder etc. - Linus] * 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (27 commits) objtool: Support conditional retpolines objtool: Convert insn type to enum objtool: Fix seg fault on bad switch table entry objtool: Support repeated uses of the same C jump table objtool: Refactor jump table code objtool: Refactor sibling call detection logic objtool: Do frame pointer check before dead end check objtool: Change dead_end_function() to return boolean objtool: Warn on zero-length functions objtool: Refactor function alias logic objtool: Track original function across branches objtool: Add mcsafe_handle_tail() to the uaccess safe list bpf: Disable GCC -fgcse optimization for ___bpf_prog_run() x86/uaccess: Remove redundant CLACs in getuser/putuser error paths x86/uaccess: Don't leak AC flag into fentry from mcsafe_handle_tail() x86/uaccess: Remove ELF function annotation from copy_user_handle_tail() x86/head/64: Annotate start_cpu0() as non-callable x86/entry: Fix thunk function ELF sizes x86/kvm: Don't call kvm_spurious_fault() from .fixup x86/kvm: Replace vmx_vmenter()'s call to kvm_spurious_fault() with UD2 ... | 20 July 2019, 17:45:15 UTC |
| 4b01f5a | Linus Torvalds | 20 July 2019, 17:43:03 UTC | Merge branch 'smp-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull smp fix from Thomas Gleixner: "Add warnings to the smp function calls so callers from wrong contexts get detected" * 'smp-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: smp: Warn on function calls from softirq context | 20 July 2019, 17:43:03 UTC |
| 70e6e1b | Linus Torvalds | 20 July 2019, 17:33:44 UTC | Merge branch 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull CONFIG_PREEMPT_RT stub config from Thomas Gleixner: "The real-time preemption patch set exists for almost 15 years now and while the vast majority of infrastructure and enhancements have found their way into the mainline kernel, the final integration of RT is still missing. Over the course of the last few years, we have worked on reducing the intrusivenness of the RT patches by refactoring kernel infrastructure to be more real-time friendly. Almost all of these changes were benefitial to the mainline kernel on their own, so there was no objection to integrate them. Though except for the still ongoing printk refactoring, the remaining changes which are required to make RT a first class mainline citizen are not longer arguable as immediately beneficial for the mainline kernel. Most of them are either reordering code flows or adding RT specific functionality. But this now has hit a wall and turned into a classic hen and egg problem: Maintainers are rightfully wary vs. these changes as they make only sense if the final integration of RT into the mainline kernel takes place. Adding CONFIG_PREEMPT_RT aims to solve this as a clear sign that RT will be fully integrated into the mainline kernel. The final integration of the missing bits and pieces will be of course done with the same careful approach as we have used in the past. While I'm aware that you are not entirely enthusiastic about that, I think that RT should receive the same treatment as any other widely used out of tree functionality, which we have accepted into mainline over the years. RT has become the de-facto standard real-time enhancement and is shipped by enterprise, embedded and community distros. It's in use throughout a wide range of industries: telecommunications, industrial automation, professional audio, medical devices, data acquisition, automotive - just to name a few major use cases. RT development is backed by a Linuxfoundation project which is supported by major stakeholders of this technology. The funding will continue over the actual inclusion into mainline to make sure that the functionality is neither introducing regressions, regressing itself, nor becomes subject to bitrot. There is also a lifely user community around RT as well, so contrary to the grim situation 5 years ago, it's a healthy project. As RT is still a good vehicle to exercise rarely used code paths and to detect hard to trigger issues, you could at least view it as a QA tool if nothing else" * 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: sched/rt, Kconfig: Introduce CONFIG_PREEMPT_RT | 20 July 2019, 17:33:44 UTC |
| 07ab9d5 | Linus Torvalds | 20 July 2019, 17:20:27 UTC | Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm Pull more KVM updates from Paolo Bonzini: "Mostly bugfixes, but also: - s390 support for KVM selftests - LAPIC timer offloading to housekeeping CPUs - Extend an s390 optimization for overcommitted hosts to all architectures - Debugging cleanups and improvements" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (25 commits) KVM: x86: Add fixed counters to PMU filter KVM: nVMX: do not use dangling shadow VMCS after guest reset KVM: VMX: dump VMCS on failed entry KVM: x86/vPMU: refine kvm_pmu err msg when event creation failed KVM: s390: Use kvm_vcpu_wake_up in kvm_s390_vcpu_wakeup KVM: Boost vCPUs that are delivering interrupts KVM: selftests: Remove superfluous define from vmx.c KVM: SVM: Fix detection of AMD Errata 1096 KVM: LAPIC: Inject timer interrupt via posted interrupt KVM: LAPIC: Make lapic timer unpinned KVM: x86/vPMU: reset pmc->counter to 0 for pmu fixed_counters KVM: nVMX: Ignore segment base for VMX memory operand when segment not FS or GS kvm: x86: ioapic and apic debug macros cleanup kvm: x86: some tsc debug cleanup kvm: vmx: fix coccinelle warnings x86: kvm: avoid constant-conversion warning x86: kvm: avoid -Wsometimes-uninitized warning KVM: x86: expose AVX512_BF16 feature to guest KVM: selftests: enable pgste option for the linker on s390 KVM: selftests: Move kvm_create_max_vcpus test to generic code ... | 20 July 2019, 17:20:27 UTC |
| f65420d | Linus Torvalds | 20 July 2019, 17:04:58 UTC | Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi Pull SCSI fixes from James Bottomley: "This is the final round of mostly small fixes in our initial submit. It's mostly minor fixes and driver updates. The only change of note is adding a virt_boundary_mask to the SCSI host and host template to parametrise this for NVMe devices instead of having them do a call in slave_alloc. It's a fairly straightforward conversion except in the two NVMe handling drivers that didn't set it who now have a virtual infinity parameter added" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (24 commits) scsi: megaraid_sas: set an unlimited max_segment_size scsi: mpt3sas: set an unlimited max_segment_size for SAS 3.0 HBAs scsi: IB/srp: set virt_boundary_mask in the scsi host scsi: IB/iser: set virt_boundary_mask in the scsi host scsi: storvsc: set virt_boundary_mask in the scsi host template scsi: ufshcd: set max_segment_size in the scsi host template scsi: core: take the DMA max mapping size into account scsi: core: add a host / host template field for the virt boundary scsi: core: Fix race on creating sense cache scsi: sd_zbc: Fix compilation warning scsi: libfc: fix null pointer dereference on a null lport scsi: zfcp: fix GCC compiler warning emitted with -Wmaybe-uninitialized scsi: zfcp: fix request object use-after-free in send path causing wrong traces scsi: zfcp: fix request object use-after-free in send path causing seqno errors scsi: megaraid_sas: Update driver version to 07.710.50.00 scsi: megaraid_sas: Add module parameter for FW Async event logging scsi: megaraid_sas: Enable msix_load_balance for Invader and later controllers scsi: megaraid_sas: Fix calculation of target ID scsi: lpfc: reduce stack size with CONFIG_GCC_PLUGIN_STRUCTLEAK_VERBOSE scsi: devinfo: BLIST_TRY_VPD_PAGES for SanDisk Cruzer Blade ... | 20 July 2019, 17:04:58 UTC |
| 168c799 | Linus Torvalds | 20 July 2019, 16:34:55 UTC | Merge tag 'kbuild-v5.3-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild Pull more Kbuild updates from Masahiro Yamada: - match the directory structure of the linux-libc-dev package to that of Debian-based distributions - fix incorrect include/config/auto.conf generation when Kconfig creates it along with the .config file - remove misleading $(AS) from documents - clean up precious tag files by distclean instead of mrproper - add a new coccinelle patch for devm_platform_ioremap_resource migration - refactor module-related scripts to read modules.order instead of $(MODVERDIR)/*.mod files to get the list of created modules - remove MODVERDIR - update list of header compile-test - add -fcf-protection=none flag to avoid conflict with the retpoline flags when CONFIG_RETPOLINE=y - misc cleanups * tag 'kbuild-v5.3-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (25 commits) kbuild: add -fcf-protection=none when using retpoline flags kbuild: update compile-test header list for v5.3-rc1 kbuild: split out *.mod out of {single,multi}-used-m rules kbuild: remove 'prepare1' target kbuild: remove the first line of *.mod files kbuild: create *.mod with full directory path and remove MODVERDIR kbuild: export_report: read modules.order instead of .tmp_versions/*.mod kbuild: modpost: read modules.order instead of $(MODVERDIR)/*.mod kbuild: modsign: read modules.order instead of $(MODVERDIR)/*.mod kbuild: modinst: read modules.order instead of $(MODVERDIR)/*.mod scsi: remove pointless $(MODVERDIR)/$(obj)/53c700.ver kbuild: remove duplication from modules.order in sub-directories kbuild: get rid of kernel/ prefix from in-tree modules.{order,builtin} kbuild: do not create empty modules.order in the prepare stage coccinelle: api: add devm_platform_ioremap_resource script kbuild: compile-test headers listed in header-test-m as well kbuild: remove unused hostcc-option kbuild: remove tag files by distclean instead of mrproper kbuild: add --hash-style= and --build-id unconditionally kbuild: get rid of misleading $(AS) from documents ... | 20 July 2019, 16:34:55 UTC |
| 18253e0 | Linus Torvalds | 20 July 2019, 16:15:51 UTC | Merge branch 'work.dcache2' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull dcache and mountpoint updates from Al Viro: "Saner handling of refcounts to mountpoints. Transfer the counting reference from struct mount ->mnt_mountpoint over to struct mountpoint ->m_dentry. That allows us to get rid of the convoluted games with ordering of mount shutdowns. The cost is in teaching shrink_dcache_{parent,for_umount} to cope with mixed-filesystem shrink lists, which we'll also need for the Slab Movable Objects patchset" * 'work.dcache2' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: switch the remnants of releasing the mountpoint away from fs_pin get rid of detach_mnt() make struct mountpoint bear the dentry reference to mountpoint, not struct mount Teach shrink_dcache_parent() to cope with mixed-filesystem shrink lists fs/namespace.c: shift put_mountpoint() to callers of unhash_mnt() __detach_mounts(): lookup_mountpoint() can't return ERR_PTR() anymore nfs: dget_parent() never returns NULL ceph: don't open-code the check for dead lockref | 20 July 2019, 16:15:51 UTC |
| 6879298 | Thomas Gleixner | 20 July 2019, 08:56:41 UTC | x86/entry/64: Prevent clobbering of saved CR2 value The recent fix for CR2 corruption introduced a new way to reliably corrupt the saved CR2 value. CR2 is saved early in the entry code in RDX, which is the third argument to the fault handling functions. But it missed that between saving and invoking the fault handler enter_from_user_mode() can be called. RDX is a caller saved register so the invoked function can freely clobber it with the obvious consequences. The TRACE_IRQS_OFF call is safe as it calls through the thunk which preserves RDX, but TRACE_IRQS_OFF_DEBUG is not because it also calls into C-code outside of the thunk. Store CR2 in R12 instead which is a callee saved register and move R12 to RDX just before calling the fault handler. Fixes: a0d14b8909de ("x86/mm, tracing: Fix CR2 corruption") Reported-by: Sean Christopherson <sean.j.christopherson@intel.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Link: https://lkml.kernel.org/r/alpine.DEB.2.21.1907201020540.1782@nanos.tec.linutronix.de | 20 July 2019, 12:28:41 UTC |
| 19dbdcb | Peter Zijlstra | 18 July 2019, 09:20:09 UTC | smp: Warn on function calls from softirq context It's clearly documented that smp function calls cannot be invoked from softirq handling context. Unfortunately nothing enforces that or emits a warning. A single function call can be invoked from softirq context only via smp_call_function_single_async(). The only legit context is task context, so add a warning to that effect. Reported-by: luferry <luferry@163.com> Signed-off-by: Peter Zijlstra <peterz@infradead.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lkml.kernel.org/r/20190718160601.GP3402@hirez.programming.kicks-ass.net | 20 July 2019, 09:27:16 UTC |
| 30cd860 | Eric Hankland | 18 July 2019, 18:38:18 UTC | KVM: x86: Add fixed counters to PMU filter Updates KVM_CAP_PMU_EVENT_FILTER so it can also whitelist or blacklist fixed counters. Signed-off-by: Eric Hankland <ehankland@google.com> [No need to check padding fields for zero. - Paolo] Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> | 20 July 2019, 07:00:48 UTC |
| 88dddc1 | Paolo Bonzini | 19 July 2019, 16:41:10 UTC | KVM: nVMX: do not use dangling shadow VMCS after guest reset If a KVM guest is reset while running a nested guest, free_nested will disable the shadow VMCS execution control in the vmcs01. However, on the next KVM_RUN vmx_vcpu_run would nevertheless try to sync the VMCS12 to the shadow VMCS which has since been freed. This causes a vmptrld of a NULL pointer on my machime, but Jan reports the host to hang altogether. Let's see how much this trivial patch fixes. Reported-by: Jan Kiszka <jan.kiszka@siemens.com> Cc: Liran Alon <liran.alon@oracle.com> Cc: stable@vger.kernel.org Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> | 20 July 2019, 07:00:47 UTC |
| 3b20e03 | Paolo Bonzini | 19 July 2019, 16:15:08 UTC | KVM: VMX: dump VMCS on failed entry This is useful for debugging, and is ratelimited nowadays. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> | 20 July 2019, 07:00:47 UTC |
| 6fc3977 | Like Xu | 18 July 2019, 05:35:14 UTC | KVM: x86/vPMU: refine kvm_pmu err msg when event creation failed If a perf_event creation fails due to any reason of the host perf subsystem, it has no chance to log the corresponding event for guest which may cause abnormal sampling data in guest result. In debug mode, this message helps to understand the state of vPMC and we may not limit the number of occurrences but not in a spamming style. Suggested-by: Joe Perches <joe@perches.com> Signed-off-by: Like Xu <like.xu@linux.intel.com> Cc: stable@vger.kernel.org Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> | 20 July 2019, 07:00:46 UTC |
| d984740 | Wanpeng Li | 18 July 2019, 11:39:07 UTC | KVM: s390: Use kvm_vcpu_wake_up in kvm_s390_vcpu_wakeup Use kvm_vcpu_wake_up() in kvm_s390_vcpu_wakeup(). Suggested-by: Paolo Bonzini <pbonzini@redhat.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Radim Krčmář <rkrcmar@redhat.com> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Wanpeng Li <wanpengli@tencent.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> | 20 July 2019, 07:00:45 UTC |
| d73eb57 | Wanpeng Li | 18 July 2019, 11:39:06 UTC | KVM: Boost vCPUs that are delivering interrupts Inspired by commit 9cac38dd5d (KVM/s390: Set preempted flag during vcpu wakeup and interrupt delivery), we want to also boost not just lock holders but also vCPUs that are delivering interrupts. Most smp_call_function_many calls are synchronous, so the IPI target vCPUs are also good yield candidates. This patch introduces vcpu->ready to boost vCPUs during wakeup and interrupt delivery time; unlike s390 we do not reuse vcpu->preempted so that voluntarily preempted vCPUs are taken into account by kvm_vcpu_on_spin, but vmx_vcpu_pi_put is not affected (VT-d PI handles voluntary preemption separately, in pi_pre_block). Testing on 80 HT 2 socket Xeon Skylake server, with 80 vCPUs VM 80GB RAM: ebizzy -M vanilla boosting improved 1VM 21443 23520 9% 2VM 2800 8000 180% 3VM 1800 3100 72% Testing on my Haswell desktop 8 HT, with 8 vCPUs VM 8GB RAM, two VMs, one running ebizzy -M, the other running 'stress --cpu 2': w/ boosting + w/o pv sched yield(vanilla) vanilla boosting improved 1570 4000 155% w/ boosting + w/ pv sched yield(vanilla) vanilla boosting improved 1844 5157 179% w/o boosting, perf top in VM: 72.33% [kernel] [k] smp_call_function_many 4.22% [kernel] [k] call_function_i 3.71% [kernel] [k] async_page_fault w/ boosting, perf top in VM: 38.43% [kernel] [k] smp_call_function_many 6.31% [kernel] [k] async_page_fault 6.13% libc-2.23.so [.] __memcpy_avx_unaligned 4.88% [kernel] [k] call_function_interrupt Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Radim Krčmář <rkrcmar@redhat.com> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: Paul Mackerras <paulus@ozlabs.org> Cc: Marc Zyngier <maz@kernel.org> Signed-off-by: Wanpeng Li <wanpengli@tencent.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> | 20 July 2019, 07:00:45 UTC |
| 2417c87 | Thomas Huth | 18 July 2019, 11:55:27 UTC | KVM: selftests: Remove superfluous define from vmx.c The code in vmx.c does not use "program_invocation_name", so there is no need to "#define _GNU_SOURCE" here. Signed-off-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> | 20 July 2019, 07:00:44 UTC |
| 118154b | Liran Alon | 16 July 2019, 23:56:58 UTC | KVM: SVM: Fix detection of AMD Errata 1096 When CPU raise #NPF on guest data access and guest CR4.SMAP=1, it is possible that CPU microcode implementing DecodeAssist will fail to read bytes of instruction which caused #NPF. This is AMD errata 1096 and it happens because CPU microcode reading instruction bytes incorrectly attempts to read code as implicit supervisor-mode data accesses (that is, just like it would read e.g. a TSS), which are susceptible to SMAP faults. The microcode reads CS:RIP and if it is a user-mode address according to the page tables, the processor gives up and returns no instruction bytes. In this case, GuestIntrBytes field of the VMCB on a VMEXIT will incorrectly return 0 instead of the correct guest instruction bytes. Current KVM code attemps to detect and workaround this errata, but it has multiple issues: 1) It mistakenly checks if guest CR4.SMAP=0 instead of guest CR4.SMAP=1, which is required for encountering a SMAP fault. 2) It assumes SMAP faults can only occur when guest CPL==3. However, in case guest CR4.SMEP=0, the guest can execute an instruction which reside in a user-accessible page with CPL<3 priviledge. If this instruction raise a #NPF on it's data access, then CPU DecodeAssist microcode will still encounter a SMAP violation. Even though no sane OS will do so (as it's an obvious priviledge escalation vulnerability), we still need to handle this semanticly correct in KVM side. Note that (2) *is* a useful optimization, because CR4.SMAP=1 is an easy triggerable condition and guests usually enable SMAP together with SMEP. If the vCPU has CR4.SMEP=1, the errata could indeed be encountered onlt at guest CPL==3; otherwise, the CPU would raise a SMEP fault to guest instead of #NPF. We keep this condition to avoid false positives in the detection of the errata. In addition, to avoid future confusion and improve code readbility, include details of the errata in code and not just in commit message. Fixes: 05d5a4863525 ("KVM: SVM: Workaround errata#1096 (insn_len maybe zero on SMAP violation)") Cc: Singh Brijesh <brijesh.singh@amd.com> Cc: Sean Christopherson <sean.j.christopherson@intel.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Signed-off-by: Liran Alon <liran.alon@oracle.com> Reviewed-by: Brijesh Singh <brijesh.singh@amd.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> | 20 July 2019, 07:00:44 UTC |
| 0c5f81d | Wanpeng Li | 06 July 2019, 01:26:51 UTC | KVM: LAPIC: Inject timer interrupt via posted interrupt Dedicated instances are currently disturbed by unnecessary jitter due to the emulated lapic timers firing on the same pCPUs where the vCPUs reside. There is no hardware virtual timer on Intel for guest like ARM, so both programming timer in guest and the emulated timer fires incur vmexits. This patch tries to avoid vmexit when the emulated timer fires, at least in dedicated instance scenario when nohz_full is enabled. In that case, the emulated timers can be offload to the nearest busy housekeeping cpus since APICv has been found for several years in server processors. The guest timer interrupt can then be injected via posted interrupts, which are delivered by the housekeeping cpu once the emulated timer fires. The host should tuned so that vCPUs are placed on isolated physical processors, and with several pCPUs surplus for busy housekeeping. If disabled mwait/hlt/pause vmexits keep the vCPUs in non-root mode, ~3% redis performance benefit can be observed on Skylake server, and the number of external interrupt vmexits drops substantially. Without patch VM-EXIT Samples Samples% Time% Min Time Max Time Avg time EXTERNAL_INTERRUPT 42916 49.43% 39.30% 0.47us 106.09us 0.71us ( +- 1.09% ) While with patch: VM-EXIT Samples Samples% Time% Min Time Max Time Avg time EXTERNAL_INTERRUPT 6871 9.29% 2.96% 0.44us 57.88us 0.72us ( +- 4.02% ) Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Radim Krčmář <rkrcmar@redhat.com> Cc: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by: Wanpeng Li <wanpengli@tencent.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> | 20 July 2019, 07:00:40 UTC |
| c39f2d9 | Dmitry Torokhov | 20 July 2019, 04:07:56 UTC | Merge branch 'next' into for-linus Prepare second round of input updates for 5.3 merge window. | 20 July 2019, 04:07:56 UTC |
| 29be86d | Seth Forshee | 17 July 2019, 16:06:26 UTC | kbuild: add -fcf-protection=none when using retpoline flags The gcc -fcf-protection=branch option is not compatible with -mindirect-branch=thunk-extern. The latter is used when CONFIG_RETPOLINE is selected, and this will fail to build with a gcc which has -fcf-protection=branch enabled by default. Adding -fcf-protection=none when building with retpoline enabled prevents such build failures. Signed-off-by: Seth Forshee <seth.forshee@canonical.com> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> | 20 July 2019, 02:20:24 UTC |
| 67bf474 | Masahiro Yamada | 17 July 2019, 06:29:13 UTC | kbuild: update compile-test header list for v5.3-rc1 - Some headers graduated from the blacklist - hyperv_timer.h joined the header-test when CONFIG_X86=y - nf_tables*.h joined the header-test when CONFIG_NF_TABLES is enabled. - The entry for nf_tables_offload.h was added to fix build error for the combination of CONFIG_NF_TABLES=n and CONFIG_KERNEL_HEADER_TEST=y. - The entry for iomap.h was added because this header is supposed to be included only when CONFIG_BLOCK=y Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> | 20 July 2019, 02:19:29 UTC |
| abdfd52 | Linus Torvalds | 20 July 2019, 00:27:27 UTC | Merge tag 'armsoc-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull ARM SoC defconfig updates from Olof Johansson: "We keep this in a separate branch to avoid cross-branch conflicts, but most of the material here is fairly boring -- some new drivers turned on for hardware since they were merged, and some refreshed files due to time having moved a lot of entries around" * tag 'armsoc-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (47 commits) ARM: configs: multi_v5: Remove duplicate ASPEED options arm64: defconfig: Enable CONFIG_KEYBOARD_SNVS_PWRKEY as module ARM: imx_v6_v7_defconfig: Enable CONFIG_ARM_IMX_CPUFREQ_DT defconfig: arm64: enable i.MX8 SCU octop driver arm64: defconfig: Add i.MX SCU SoC info driver arm64: defconfig: Enable CONFIG_QORIQ_THERMAL ARM: imx_v6_v7_defconfig: Select CONFIG_NVMEM_SNVS_LPGPR arm64: defconfig: ARM_IMX_CPUFREQ_DT=m ARM: imx_v6_v7_defconfig: Add TPM PWM support by default ARM: imx_v6_v7_defconfig: Enable the OV2680 camera driver ARM: imx_v6_v7_defconfig: Enable CONFIG_THERMAL_STATISTICS arm64: defconfig: NVMEM_IMX_OCOTP=y for imx8m ARM: multi_v7_defconfig: enable STMFX pinctrl support arm64 defconfig: enable LVM support ARM: configs: multi_v5: Add more ASPEED devices arm64: defconfig: Add Tegra194 PCIe driver ARM: configs: aspeed: Add new drivers ARM: exynos_defconfig: Enable Panfrost and Lima drivers ARM: multi_v7_defconfig: Enable Panfrost and Lima drivers arm64 defconfig: enable Mellanox cards ... | 20 July 2019, 00:27:27 UTC |
| af6af87 | Linus Torvalds | 20 July 2019, 00:19:24 UTC | Merge tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull ARM Devicetree updates from Olof Johansson: "We continue to see a lot of new material. I've highlighted some of it below, but there's been more beyond that as well. One of the sweeping changes is that many boards have seen their ARM Mali GPU devices added to device trees, since the DRM drivers have now been merged. So, with the caveat that I have surely missed several great contributions, here's a collection of the material this time around: New SoCs: - Mediatek mt8183 (4x Cortex-A73 + 4x Cortex-A53) - TI J721E (2x Cortex-A72 + 3x Cortex-R5F + 3 DSPs + MMA) - Amlogic G12B (4x Cortex-A73 + 2x Cortex-A53) New Boards / platforms: - Aspeed BMC support for a number of new server platforms - Kontron SMARC SoM (several i.MX6 versions) - Novtech's Meerkat96 (i.MX7) - ST Micro Avenger96 board - Hardkernel ODROID-N2 (Amlogic G12B) - Purism Librem5 devkit (i.MX8MQ) - Google Cheza (Qualcomm SDM845) - Qualcomm Dragonboard 845c (Qualcomm SDM845) - Hugsun X99 TV Box (Rockchip RK3399) - Khadas Edge/Edge-V/Captain (Rockchip RK3399) Updated / expanded boards and platforms: - Renesas r7s9210 has a lot of new peripherals added - Fixes and polish for Rockchip-based Chromebooks - Amlogic G12A has a lot of peripherals added - Nvidia Jetson Nano sees various fixes and improvements, and is now at feature parity with TX1" * tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (586 commits) ARM: dts: gemini: Set DIR-685 SPI CS as active low ARM: dts: exynos: Adjust buck[78] regulators to supported values on Arndale Octa ARM: dts: exynos: Adjust buck[78] regulators to supported values on Odroid XU3 family ARM: dts: exynos: Move Mali400 GPU node to "/soc" ARM: dts: exynos: Fix imprecise abort on Mali GPU probe on Exynos4210 arm64: dts: qcom: qcs404: Add missing space for cooling-cells property arm64: dts: rockchip: Fix USB3 Type-C on rk3399-sapphire arm64: dts: rockchip: Update DWC3 modules on RK3399 SoCs arm64: dts: rockchip: enable rk3328 watchdog clock ARM: dts: rockchip: add display nodes for rk322x ARM: dts: rockchip: fix vop iommu-cells on rk322x arm64: dts: rockchip: Add support for Hugsun X99 TV Box arm64: dts: rockchip: Define values for the IPA governor for rock960 arm64: dts: rockchip: Fix multiple thermal zones conflict in rk3399.dtsi arm64: dts: rockchip: add core dtsi file for RK3399Pro SoCs arm64: dts: rockchip: improve rk3328-roc-cc rgmii performance. Revert "ARM: dts: rockchip: set PWM delay backlight settings for Minnie" ARM: dts: rockchip: Configure BT_DEV_WAKE in on rk3288-veyron arm64: dts: qcom: sdm845-cheza: add initial cheza dt ARM: dts: msm8974-FP2: Add vibration motor ... | 20 July 2019, 00:19:24 UTC |
| 8362fd6 | Linus Torvalds | 20 July 2019, 00:13:56 UTC | Merge tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull ARM SoC-related driver updates from Olof Johansson: "Various driver updates for platforms and a couple of the small driver subsystems we merge through our tree: - A driver for SCU (system control) on NXP i.MX8QXP - Qualcomm Always-on Subsystem messaging driver (AOSS QMP) - Qualcomm PM support for MSM8998 - Support for a newer version of DRAM PHY driver for Broadcom (DPFE) - Reset controller support for Bitmain BM1880 - TI SCI (System Control Interface) support for CPU control on AM654 processors - More TI sysc refactoring and rework" * tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (84 commits) reset: remove redundant null check on pointer dev soc: rockchip: work around clang warning dt-bindings: reset: imx7: Fix the spelling of 'indices' soc: imx: Add i.MX8MN SoC driver support soc: aspeed: lpc-ctrl: Fix probe error handling soc: qcom: geni: Add support for ACPI firmware: ti_sci: Fix gcc unused-but-set-variable warning firmware: ti_sci: Use the correct style for SPDX License Identifier soc: imx8: Use existing of_root directly soc: imx8: Fix potential kernel dump in error path firmware/psci: psci_checker: Park kthreads before stopping them memory: move jedec_ddr.h from include/memory to drivers/memory/ memory: move jedec_ddr_data.c from lib/ to drivers/memory/ MAINTAINERS: Remove myself as qcom maintainer soc: aspeed: lpc-ctrl: make parameter optional soc: qcom: apr: Don't use reg for domain id soc: qcom: fix QCOM_AOSS_QMP dependency and build errors memory: tegra: Fix -Wunused-const-variable firmware: tegra: Early resume BPMP soc/tegra: Select pinctrl for Tegra194 ... | 20 July 2019, 00:13:56 UTC |
| 24e4491 | Linus Torvalds | 20 July 2019, 00:05:08 UTC | Merge tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull ARM SoC platform updates from Olof Johansson: "SoC platform changes. Main theme this merge window: - The Netx platform (Netx 100/500) platform is removed by Linus Walleij-- the SoC doesn't have active maintainers with hardware, and in discussions with the vendor the agreement was that it's OK to remove. - Russell King has a series of patches that cleans up and refactors SA1101 and RiscPC support" * tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (47 commits) ARM: stm32: use "depends on" instead of "if" after prompt ARM: sa1100: convert to common clock framework ARM: exynos: Cleanup cppcheck shifting warning ARM: pxa/lubbock: remove lubbock_set_misc_wr() from global view ARM: exynos: Only build MCPM support if used arm: add missing include platform-data/atmel.h ARM: davinci: Use GPIO lookup table for DA850 LEDs ARM: OMAP2: drop explicit assembler architecture ARM: use arch_extension directive instead of arch argument ARM: imx: Switch imx7d to imx-cpufreq-dt for speed-grading ARM: bcm: Enable PINCTRL for ARCH_BRCMSTB ARM: bcm: Enable ARCH_HAS_RESET_CONTROLLER for ARCH_BRCMSTB ARM: riscpc: enable chained scatterlist support ARM: riscpc: reduce IRQ handling code ARM: riscpc: move RiscPC assembly files from arch/arm/lib to mach-rpc ARM: riscpc: parse video information from tagged list ARM: riscpc: add ecard quirk for Atomwide 3port serial card MAINTAINERS: mvebu: Add git entry soc: ti: pm33xx: Add a print while entering RTC only mode with DDR in self-refresh ARM: OMAP2+: Make some variables static ... | 20 July 2019, 00:05:08 UTC |
| 31cc088 | Linus Torvalds | 19 July 2019, 19:29:43 UTC | Merge tag 'drm-next-2019-07-19' of git://anongit.freedesktop.org/drm/drm Pull drm fixes from Daniel Vetter: "Dave is back in shape, but now family got it so I'm doing the pull. Two things worthy of note: - nouveau feature pull was way too late, Dave&me decided to not take that, so Ben spun up a pull with just the fixes. - after some chatting with the arm display maintainers we decided to change a bit how that's maintained, for more oversight/review and cross vendor collab. More details below: nouveau: - bugfixes - TU116 enabling (minor iteration) :w amdgpu: - large pile of fixes for new hw support this release (navi, vega20) - audio hotplug fix - bunch of corner cases and small fixes all over for amdgpu/kfd komeda: - back out some new properties (from this merge window) that needs more pondering. bochs: - fb pitch setup core: - a new panel quirk - misc fixes" * tag 'drm-next-2019-07-19' of git://anongit.freedesktop.org/drm/drm: (73 commits) drm/nouveau/secboot/gp102-: remove WAR for SEC2 RTOS start bug drm/nouveau/flcn/gp102-: improve implementation of bind_context() on SEC2/GSP drm/nouveau: fix memory leak in nouveau_conn_reset() drm/nouveau/dmem: missing mutex_lock in error path drm/nouveau/hwmon: return EINVAL if the GPU is powered down for sensors reads drm/nouveau: fix bogus GPL-2 license header drm/nouveau: fix bogus GPL-2 license header drm/nouveau/i2c: Enable i2c pads & busses during preinit drm/nouveau/disp/tu102-: wire up scdc parameter setter drm/nouveau/core: recognise TU116 chipset drm/nouveau/kms: disallow dual-link harder if hdmi connection detected drm/nouveau/disp/nv50-: fix center/aspect-corrected scaling drm/nouveau/disp/nv50-: force scaler for any non-default LVDS/eDP modes drm/nouveau/mcp89/mmu: Use mcp77_mmu_new instead of g84_mmu_new on MCP89. drm/amd/display: init res_pool dccg_ref, dchub_ref with xtalin_freq drm/amdgpu/pm: remove check for pp funcs in freq sysfs handlers drm/amd/display: Force uclk to max for every state drm/amdkfd: Remove GWS from process during uninit drm/amd/amdgpu: Fix offset for vmid selection in debugfs interface drm/amd/powerplay: update vega20 driver if to fit latest SMU firmware ... | 19 July 2019, 19:29:43 UTC |
| dd4542d | Linus Torvalds | 19 July 2019, 19:23:37 UTC | Merge branch 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6 Pull crypto fixes from Herbert Xu: - Fix missed wake-up race in padata - Use crypto_memneq in ccp - Fix version check in ccp - Fix fuzz test failure in ccp - Fix potential double free in crypto4xx - Fix compile warning in stm32 * 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: padata: use smp_mb in padata_reorder to avoid orphaned padata jobs crypto: ccp - Fix SEV_VERSION_GREATER_OR_EQUAL crypto: ccp/gcm - use const time tag comparison. crypto: ccp - memset structure fields to zero before reuse crypto: crypto4xx - fix a potential double free in ppc4xx_trng_probe crypto: stm32/hash - Fix incorrect printk modifier for size_t | 19 July 2019, 19:23:37 UTC |
| 40ef768 | Dave Jones | 19 July 2019, 03:51:56 UTC | Remove references to dead website. This fell into disrepair a while ago, and the majority of hits to the snapshots were from bots, so it's more trouble to keep running than it's worth. Signed-off-by: Dave Jones <davej@codemonkey.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 19 July 2019, 19:22:04 UTC |
| 41ba485 | Linus Torvalds | 19 July 2019, 19:18:46 UTC | Merge tag 'trace-v5.3-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace Pull tracing fix from Steven Rostedt: "Eiichi Tsukata found a small bug from the fixup of the stack code Removing ULONG_MAX as the marker for the user stack trace end, made the tracing code not know where the end is. The end is now marked with a zero (NULL) pointer. Eiichi fixed this in the tracing code" * tag 'trace-v5.3-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: tracing: Fix user stack trace "??" output | 19 July 2019, 19:18:46 UTC |
| a84d2d2 | Linus Torvalds | 19 July 2019, 19:15:33 UTC | Merge tag 'csky-for-linus-5.3-rc1' of git://github.com/c-sky/csky-linux Pull arch/csky pupdates from Guo Ren: "This round of csky subsystem gives two features (ASID algorithm update, Perf pmu record support) and some fixups. ASID updates: - Revert mmu ASID mechanism - Add new asid lib code from arm - Use generic asid algorithm to implement switch_mm - Improve tlb operation with help of asid Perf pmu record support: - Init pmu as a device - Add count-width property for csky pmu - Add pmu interrupt support - Fix perf record in kernel/user space - dt-bindings: Add csky PMU bindings Fixes: - Fixup no panic in kernel for some traps - Fixup some error count in 810 & 860. - Fixup abiv1 memset error" * tag 'csky-for-linus-5.3-rc1' of git://github.com/c-sky/csky-linux: csky: Fixup abiv1 memset error csky: Improve tlb operation with help of asid csky: Use generic asid algorithm to implement switch_mm csky: Add new asid lib code from arm csky: Revert mmu ASID mechanism dt-bindings: csky: Add csky PMU bindings dt-bindings: interrupt-controller: Update csky mpintc csky: Fixup some error count in 810 & 860. csky: Fix perf record in kernel/user space csky: Add pmu interrupt support csky: Add count-width property for csky pmu csky: Init pmu as a device csky: Fixup no panic in kernel for some traps csky: Select intc & timer drivers | 19 July 2019, 19:15:33 UTC |
| b5d72dd | Linus Torvalds | 19 July 2019, 18:41:26 UTC | Merge tag 'for-linus-5.3a-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip Pull xen updates from Juergen Gross: "Fixes and features: - A series to introduce a common command line parameter for disabling paravirtual extensions when running as a guest in virtualized environment - A fix for int3 handling in Xen pv guests - Removal of the Xen-specific tmem driver as support of tmem in Xen has been dropped (and it was experimental only) - A security fix for running as Xen dom0 (XSA-300) - A fix for IRQ handling when offlining cpus in Xen guests - Some small cleanups" * tag 'for-linus-5.3a-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: xen: let alloc_xenballooned_pages() fail if not enough memory free xen/pv: Fix a boot up hang revealed by int3 self test x86/xen: Add "nopv" support for HVM guest x86/paravirt: Remove const mark from x86_hyper_xen_hvm variable xen: Map "xen_nopv" parameter to "nopv" and mark it obsolete x86: Add "nopv" parameter to disable PV extensions x86/xen: Mark xen_hvm_need_lapic() and xen_x2apic_para_available() as __init xen: remove tmem driver Revert "x86/paravirt: Set up the virt_spin_lock_key after static keys get initialized" xen/events: fix binding user event channels to cpus | 19 July 2019, 18:41:26 UTC |
| 26473f8 | Linus Torvalds | 19 July 2019, 18:38:12 UTC | Merge tag 'iomap-5.3-merge-4' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux Pull iomap split/cleanup from Darrick Wong: "As promised, here's the second part of the iomap merge for 5.3, in which we break up iomap.c into smaller files grouped by functional area so that it'll be easier in the long run to maintain cohesiveness of code units and to review incoming patches. There are no functional changes and fs/iomap.c split cleanly. Summary: - Regroup the fs/iomap.c code by major functional area so that we can start development for 5.4 from a more stable base" * tag 'iomap-5.3-merge-4' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux: iomap: move internal declarations into fs/iomap/ iomap: move the main iteration code into a separate file iomap: move the buffered IO code into a separate file iomap: move the direct IO code into a separate file iomap: move the SEEK_HOLE code into a separate file iomap: move the file mapping reporting code into a separate file iomap: move the swapfile code into a separate file iomap: start moving code to fs/iomap/ | 19 July 2019, 18:38:12 UTC |
| 4f5ed13 | Linus Torvalds | 19 July 2019, 18:35:08 UTC | Merge branch 'work.misc' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull misc vfs updates from Al Viro: "Assorted stuff" * 'work.misc' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: perf_event_get(): don't bother with fget_raw() vfs: update d_make_root() description | 19 July 2019, 18:35:08 UTC |
| d2fbf4b | Linus Torvalds | 19 July 2019, 18:33:22 UTC | Merge branch 'work.adfs' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull adfs updates from Al Viro: "More ADFS patches from Russell King" * 'work.adfs' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: fs/adfs: add time stamp and file type helpers fs/adfs: super: limit idlen according to directory type fs/adfs: super: fix use-after-free bug fs/adfs: super: safely update options on remount fs/adfs: super: correct superblock flags fs/adfs: clean up indirect disc addresses and fragment IDs fs/adfs: clean up error message printing fs/adfs: use %pV for error messages fs/adfs: use format_version from disc_record fs/adfs: add helper to get filesystem size fs/adfs: add helper to get discrecord from map fs/adfs: correct disc record structure | 19 July 2019, 18:33:22 UTC |
| 933a90b | Linus Torvalds | 19 July 2019, 17:42:02 UTC | Merge branch 'work.mount0' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull vfs mount updates from Al Viro: "The first part of mount updates. Convert filesystems to use the new mount API" * 'work.mount0' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (63 commits) mnt_init(): call shmem_init() unconditionally constify ksys_mount() string arguments don't bother with registering rootfs init_rootfs(): don't bother with init_ramfs_fs() vfs: Convert smackfs to use the new mount API vfs: Convert selinuxfs to use the new mount API vfs: Convert securityfs to use the new mount API vfs: Convert apparmorfs to use the new mount API vfs: Convert openpromfs to use the new mount API vfs: Convert xenfs to use the new mount API vfs: Convert gadgetfs to use the new mount API vfs: Convert oprofilefs to use the new mount API vfs: Convert ibmasmfs to use the new mount API vfs: Convert qib_fs/ipathfs to use the new mount API vfs: Convert efivarfs to use the new mount API vfs: Convert configfs to use the new mount API vfs: Convert binfmt_misc to use the new mount API convenience helper: get_tree_single() convenience helper get_tree_nodev() vfs: Kill sget_userns() ... | 19 July 2019, 17:42:02 UTC |
| 5f4fc6d | Linus Torvalds | 19 July 2019, 17:06:06 UTC | Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net Pull networking fixes from David Miller: 1) Fix AF_XDP cq entry leak, from Ilya Maximets. 2) Fix handling of PHY power-down on RTL8411B, from Heiner Kallweit. 3) Add some new PCI IDs to iwlwifi, from Ihab Zhaika. 4) Fix handling of neigh timers wrt. entries added by userspace, from Lorenzo Bianconi. 5) Various cases of missing of_node_put(), from Nishka Dasgupta. 6) The new NET_ACT_CT needs to depend upon NF_NAT, from Yue Haibing. 7) Various RDS layer fixes, from Gerd Rausch. 8) Fix some more fallout from TCQ_F_CAN_BYPASS generalization, from Cong Wang. 9) Fix FIB source validation checks over loopback, also from Cong Wang. 10) Use promisc for unsupported number of filters, from Justin Chen. 11) Missing sibling route unlink on failure in ipv6, from Ido Schimmel. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (90 commits) tcp: fix tcp_set_congestion_control() use from bpf hook ag71xx: fix return value check in ag71xx_probe() ag71xx: fix error return code in ag71xx_probe() usb: qmi_wwan: add D-Link DWM-222 A2 device ID bnxt_en: Fix VNIC accounting when enabling aRFS on 57500 chips. net: dsa: sja1105: Fix missing unlock on error in sk_buff() gve: replace kfree with kvfree selftests/bpf: fix test_xdp_noinline on s390 selftests/bpf: fix "valid read map access into a read-only array 1" on s390 net/mlx5: Replace kfree with kvfree MAINTAINERS: update netsec driver ipv6: Unlink sibling route in case of failure liquidio: Replace vmalloc + memset with vzalloc udp: Fix typo in net/ipv4/udp.c net: bcmgenet: use promisc for unsupported filters ipv6: rt6_check should return NULL if 'from' is NULL tipc: initialize 'validated' field of received packets selftests: add a test case for rp_filter fib: relax source validation check for loopback packets mlxsw: spectrum: Do not process learned records with a dummy FID ... | 19 July 2019, 17:06:06 UTC |
| 249be85 | Linus Torvalds | 19 July 2019, 16:45:58 UTC | Merge branch 'akpm' (patches from Andrew) Merge yet more updates from Andrew Morton: "The rest of MM and a kernel-wide procfs cleanup. Summary of the more significant patches: - Patch series "mm/memory_hotplug: Factor out memory block devicehandling", v3. David Hildenbrand. Some spring-cleaning of the memory hotplug code, notably in drivers/base/memory.c - "mm: thp: fix false negative of shmem vma's THP eligibility". Yang Shi. Fix /proc/pid/smaps output for THP pages used in shmem. - "resource: fix locking in find_next_iomem_res()" + 1. Nadav Amit. Bugfix and speedup for kernel/resource.c - Patch series "mm: Further memory block device cleanups", David Hildenbrand. More spring-cleaning of the memory hotplug code. - Patch series "mm: Sub-section memory hotplug support". Dan Williams. Generalise the memory hotplug code so that pmem can use it more completely. Then remove the hacks from the libnvdimm code which were there to work around the memory-hotplug code's constraints. - "proc/sysctl: add shared variables for range check", Matteo Croce. We have about 250 instances of int zero; ... .extra1 = &zero, in the tree. This is a tree-wide sweep to make all those private "zero"s and "one"s use global variables. Alas, it isn't practical to make those two global integers const" * emailed patches from Andrew Morton <akpm@linux-foundation.org>: (38 commits) proc/sysctl: add shared variables for range check mm: migrate: remove unused mode argument mm/sparsemem: cleanup 'section number' data types libnvdimm/pfn: stop padding pmem namespaces to section alignment libnvdimm/pfn: fix fsdax-mode namespace info-block zero-fields mm/devm_memremap_pages: enable sub-section remap mm: document ZONE_DEVICE memory-model implications mm/sparsemem: support sub-section hotplug mm/sparsemem: prepare for sub-section ranges mm: kill is_dev_zone() helper mm/hotplug: kill is_dev_zone() usage in __remove_pages() mm/sparsemem: convert kmalloc_section_memmap() to populate_section_memmap() mm/hotplug: prepare shrink_{zone, pgdat}_span for sub-section removal mm/sparsemem: add helpers track active portions of a section at boot mm/sparsemem: introduce a SECTION_IS_EARLY flag mm/sparsemem: introduce struct mem_section_usage drivers/base/memory.c: get rid of find_memory_block_hinted() mm/memory_hotplug: move and simplify walk_memory_blocks() mm/memory_hotplug: rename walk_memory_range() and pass start+size instead of pfns mm: make register_mem_sect_under_node() static ... | 19 July 2019, 16:45:58 UTC |
| 6d54ceb | Eiichi Tsukata | 30 June 2019, 08:54:38 UTC | tracing: Fix user stack trace "??" output Commit c5c27a0a5838 ("x86/stacktrace: Remove the pointless ULONG_MAX marker") removes ULONG_MAX marker from user stack trace entries but trace_user_stack_print() still uses the marker and it outputs unnecessary "??". For example: less-1911 [001] d..2 34.758944: <user stack trace> => <00007f16f2295910> => ?? => ?? => ?? => ?? => ?? => ?? => ?? The user stack trace code zeroes the storage before saving the stack, so if the trace is shorter than the maximum number of entries it can terminate the print loop if a zero entry is detected. Link: http://lkml.kernel.org/r/20190630085438.25545-1-devel@etsukata.com Cc: stable@vger.kernel.org Fixes: 4285f2fcef80 ("tracing: Remove the ULONG_MAX stack trace hackery") Signed-off-by: Eiichi Tsukata <devel@etsukata.com> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org> | 19 July 2019, 16:12:39 UTC |
| 449fa54 | Fugang Duan | 19 July 2019, 09:26:48 UTC | dma-direct: correct the physical addr in dma_direct_sync_sg_for_cpu/device dma_map_sg() may use swiotlb buffer when the kernel command line includes "swiotlb=force" or the dma_addr is out of dev->dma_mask range. After DMA complete the memory moving from device to memory, then user call dma_sync_sg_for_cpu() to sync with DMA buffer, and copy the original virtual buffer to other space. So dma_direct_sync_sg_for_cpu() should use swiotlb physical addr, not the original physical addr from sg_phys(sg). dma_direct_sync_sg_for_device() also has the same issue, correct it as well. Fixes: 55897af63091("dma-direct: merge swiotlb_dma_ops into the dma_direct code") Signed-off-by: Fugang Duan <fugang.duan@nxp.com> Reviewed-by: Robin Murphy <robin.murphy@arm.com> Signed-off-by: Christoph Hellwig <hch@lst.de> | 19 July 2019, 12:09:40 UTC |
| 771a081 | Hui Wang | 19 July 2019, 09:38:58 UTC | Input: alps - fix a mismatch between a condition check and its comment In the function alps_is_cs19_trackpoint(), we check if the param[1] is in the 0x20~0x2f range, but the code we wrote for this checking is not correct: (param[1] & 0x20) does not mean param[1] is in the range of 0x20~0x2f, it also means the param[1] is in the range of 0x30~0x3f, 0x60~0x6f... Now fix it with a new condition checking ((param[1] & 0xf0) == 0x20). Fixes: 7e4935ccc323 ("Input: alps - don't handle ALPS cs19 trackpoint-only device") Cc: stable@vger.kernel.org Signed-off-by: Hui Wang <hui.wang@canonical.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> | 19 July 2019, 09:40:35 UTC |
| 49e6979 | YueHaibing | 16 July 2019, 18:17:20 UTC | Input: psmouse - fix build error of multiple definition trackpoint_detect() should be static inline while CONFIG_MOUSE_PS2_TRACKPOINT is not set, otherwise, we build fails: drivers/input/mouse/alps.o: In function `trackpoint_detect': alps.c:(.text+0x8e00): multiple definition of `trackpoint_detect' drivers/input/mouse/psmouse-base.o:psmouse-base.c:(.text+0x1b50): first defined here Reported-by: Hulk Robot <hulkci@huawei.com> Fixes: 55e3d9224b60 ("Input: psmouse - allow disabing certain protocol extensions") Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> | 19 July 2019, 08:58:50 UTC |
| d56fef0 | Mao Wenan | 16 July 2019, 18:16:28 UTC | Input: applespi - remove set but not used variables 'sts' Fixes gcc '-Wunused-but-set-variable' warning: drivers/input/keyboard/applespi.c: In function applespi_set_bl_level: drivers/input/keyboard/applespi.c:902:6: warning: variable sts set but not used [-Wunused-but-set-variable] Fixes: b426ac0452093d ("Input: add Apple SPI keyboard and trackpad driver") Signed-off-by: Mao Wenan <maowenan@huawei.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> | 19 July 2019, 08:58:49 UTC |
| 038b1a0 | Ronald Tschalär | 15 July 2019, 17:30:11 UTC | Input: add Apple SPI keyboard and trackpad driver The keyboard and trackpad on recent MacBook's (since 8,1) and MacBookPro's (13,* and 14,*) are attached to an SPI controller instead of USB, as previously. The higher level protocol is not publicly documented and hence has been reverse engineered. As a consequence there are still a number of unknown fields and commands. However, the known parts have been working well and received extensive testing and use. In order for this driver to work, the proper SPI drivers need to be loaded too; for MB8,1 these are spi_pxa2xx_platform and spi_pxa2xx_pci; for all others they are spi_pxa2xx_platform and intel_lpss_pci. Link: https://bugzilla.kernel.org/show_bug.cgi?id=99891 Link: https://bugzilla.kernel.org/show_bug.cgi?id=108331 Signed-off-by: Ronald Tschalär <ronald@innovation.ch> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> | 19 July 2019, 08:58:34 UTC |
| e320ab3 | Dexuan Cui | 19 July 2019, 03:22:35 UTC | x86/hyper-v: Zero out the VP ASSIST PAGE on allocation The VP ASSIST PAGE is an "overlay" page (see Hyper-V TLFS's Section 5.2.1 "GPA Overlay Pages" for the details) and here is an excerpt: "The hypervisor defines several special pages that "overlay" the guest's Guest Physical Addresses (GPA) space. Overlays are addressed GPA but are not included in the normal GPA map maintained internally by the hypervisor. Conceptually, they exist in a separate map that overlays the GPA map. If a page within the GPA space is overlaid, any SPA page mapped to the GPA page is effectively "obscured" and generally unreachable by the virtual processor through processor memory accesses. If an overlay page is disabled, the underlying GPA page is "uncovered", and an existing mapping becomes accessible to the guest." SPA = System Physical Address = the final real physical address. When a CPU (e.g. CPU1) is onlined, hv_cpu_init() allocates the VP ASSIST PAGE and enables the EOI optimization for this CPU by writing the MSR HV_X64_MSR_VP_ASSIST_PAGE. From now on, hvp->apic_assist belongs to the special SPA page, and this CPU *always* uses hvp->apic_assist (which is shared with the hypervisor) to decide if it needs to write the EOI MSR. When a CPU is offlined then on the outgoing CPU: 1. hv_cpu_die() disables the EOI optimizaton for this CPU, and from now on hvp->apic_assist belongs to the original "normal" SPA page; 2. the remaining work of stopping this CPU is done 3. this CPU is completely stopped. Between 1 and 3, this CPU can still receive interrupts (e.g. reschedule IPIs from CPU0, and Local APIC timer interrupts), and this CPU *must* write the EOI MSR for every interrupt received, otherwise the hypervisor may not deliver further interrupts, which may be needed to completely stop the CPU. So, after the EOI optimization is disabled in hv_cpu_die(), it's required that the hvp->apic_assist's bit0 is zero, which is not guaranteed by the current allocation mode because it lacks __GFP_ZERO. As a consequence the bit might be set and interrupt handling would not write the EOI MSR causing interrupt delivery to become stuck. Add the missing __GFP_ZERO to the allocation. Note 1: after the "normal" SPA page is allocted and zeroed out, neither the hypervisor nor the guest writes into the page, so the page remains with zeros. Note 2: see Section 10.3.5 "EOI Assist" for the details of the EOI optimization. When the optimization is enabled, the guest can still write the EOI MSR register irrespective of the "No EOI required" value, but that's slower than the optimized assist based variant. Fixes: ba696429d290 ("x86/hyper-v: Implement EOI assist") Signed-off-by: Dexuan Cui <decui@microsoft.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: stable@vger.kernel.org Link: https://lkml.kernel.org/r/ <PU1P153MB0169B716A637FABF07433C04BFCB0@PU1P153MB0169.APCP153.PROD.OUTLOOK.COM | 19 July 2019, 07:48:15 UTC |
| 8ee7956 | Dave Airlie | 19 July 2019, 07:28:10 UTC | Merge branch 'linux-5.3' of git://github.com/skeggsb/linux into drm-next nouveau fixes and TU116 enablement. Signed-off-by: Dave Airlie <airlied@redhat.com> From: Ben Skeggs <skeggsb@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/CACAvsv5hZ3B4S9cVTPd2-Ug7dMSasLPJrWMyoDo4MOg8cbXWkA@mail.gmail.com | 19 July 2019, 07:28:38 UTC |
| 9fb7dc7 | Dave Airlie | 19 July 2019, 07:21:48 UTC | Merge tag 'drm-next-5.3-2019-07-18' of git://people.freedesktop.org/~agd5f/linux into drm-next drm-next-5.3-2019-07-18: amdgpu: - Navi DC fix for secondary adapters - Fix Navi flickering with high res panels - Navi SMU fixes - Vega20 SMU fixes - Fixes for audio hotplug on HG systems - Fix for potential integer overflows on large buffer migrations - debugfs fixes for umr - Various other small fixes amdkfd: - Apply noretry setting consistently - Fix hang in eviction - Properly clean up GWS on uninit UAPI: - clarify a comment on ctx priority Signed-off-by: Dave Airlie <airlied@redhat.com> From: Alex Deucher <alexdeucher@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190718211525.3374-1-alexander.deucher@amd.com | 19 July 2019, 07:21:48 UTC |
