Revision 5501e9229a80d95a1ea68609f44c447a75d23ed5 authored by Adrian Hunter on 07 January 2021, 17:41:59 UTC, committed by Arnaldo Carvalho de Melo on 15 January 2021, 20:28:27 UTC
In some cases, the number of cpus (nr_cpus_online) is confused with the maximum cpu number (nr_cpus_avail), which results in the error in the example below: Example on system with 8 cpus: Before: # echo 0 > /sys/devices/system/cpu/cpu2/online # ./perf record --kcore -e intel_pt// taskset --cpu-list 7 uname Linux [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.147 MB perf.data ] # ./perf script --itrace=e Requested CPU 7 too large. Consider raising MAX_NR_CPUS 0x25908 [0x8]: failed to process type: 68 [Invalid argument] After: # ./perf script --itrace=e # Fixes: 8c7274691f0d ("perf machine: Replace MAX_NR_CPUS with perf_env::nr_cpus_online") Fixes: 7df4e36a4785 ("perf session: Replace MAX_NR_CPUS with perf_env::nr_cpus_online") Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Tested-by: Kan Liang <kan.liang@linux.intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: stable@vger.kernel.org Link: http://lore.kernel.org/lkml/20210107174159.24897-1-adrian.hunter@intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
1 parent a1bf230
decode_stacktrace.sh
#!/bin/bash
# SPDX-License-Identifier: GPL-2.0
# (c) 2014, Sasha Levin <sasha.levin@oracle.com>
#set -x
if [[ $# < 1 ]]; then
echo "Usage:"
echo " $0 -r <release> | <vmlinux> [base path] [modules path]"
exit 1
fi
if [[ $1 == "-r" ]] ; then
vmlinux=""
basepath="auto"
modpath=""
release=$2
for fn in {,/usr/lib/debug}/boot/vmlinux-$release{,.debug} /lib/modules/$release{,/build}/vmlinux ; do
if [ -e "$fn" ] ; then
vmlinux=$fn
break
fi
done
if [[ $vmlinux == "" ]] ; then
echo "ERROR! vmlinux image for release $release is not found" >&2
exit 2
fi
else
vmlinux=$1
basepath=${2-auto}
modpath=$3
release=""
fi
declare -A cache
declare -A modcache
find_module() {
if [[ "$modpath" != "" ]] ; then
for fn in $(find "$modpath" -name "${module//_/[-_]}.ko*") ; do
if readelf -WS "$fn" | grep -qwF .debug_line ; then
echo $fn
return
fi
done
return 1
fi
modpath=$(dirname "$vmlinux")
find_module && return
if [[ $release == "" ]] ; then
release=$(gdb -ex 'print init_uts_ns.name.release' -ex 'quit' -quiet -batch "$vmlinux" | sed -n 's/\$1 = "\(.*\)".*/\1/p')
fi
for dn in {/usr/lib/debug,}/lib/modules/$release ; do
if [ -e "$dn" ] ; then
modpath="$dn"
find_module && return
fi
done
modpath=""
return 1
}
parse_symbol() {
# The structure of symbol at this point is:
# ([name]+[offset]/[total length])
#
# For example:
# do_basic_setup+0x9c/0xbf
if [[ $module == "" ]] ; then
local objfile=$vmlinux
elif [[ "${modcache[$module]+isset}" == "isset" ]]; then
local objfile=${modcache[$module]}
else
local objfile=$(find_module)
if [[ $objfile == "" ]] ; then
echo "WARNING! Modules path isn't set, but is needed to parse this symbol" >&2
return
fi
modcache[$module]=$objfile
fi
# Remove the englobing parenthesis
symbol=${symbol#\(}
symbol=${symbol%\)}
# Strip segment
local segment
if [[ $symbol == *:* ]] ; then
segment=${symbol%%:*}:
symbol=${symbol#*:}
fi
# Strip the symbol name so that we could look it up
local name=${symbol%+*}
# Use 'nm vmlinux' to figure out the base address of said symbol.
# It's actually faster to call it every time than to load it
# all into bash.
if [[ "${cache[$module,$name]+isset}" == "isset" ]]; then
local base_addr=${cache[$module,$name]}
else
local base_addr=$(nm "$objfile" | awk '$3 == "'$name'" && ($2 == "t" || $2 == "T") {print $1; exit}')
if [[ $base_addr == "" ]] ; then
# address not found
return
fi
cache[$module,$name]="$base_addr"
fi
# Let's start doing the math to get the exact address into the
# symbol. First, strip out the symbol total length.
local expr=${symbol%/*}
# Now, replace the symbol name with the base address we found
# before.
expr=${expr/$name/0x$base_addr}
# Evaluate it to find the actual address
expr=$((expr))
local address=$(printf "%x\n" "$expr")
# Pass it to addr2line to get filename and line number
# Could get more than one result
if [[ "${cache[$module,$address]+isset}" == "isset" ]]; then
local code=${cache[$module,$address]}
else
local code=$(${CROSS_COMPILE}addr2line -i -e "$objfile" "$address")
cache[$module,$address]=$code
fi
# addr2line doesn't return a proper error code if it fails, so
# we detect it using the value it prints so that we could preserve
# the offset/size into the function and bail out
if [[ $code == "??:0" ]]; then
return
fi
# Strip out the base of the path on each line
code=$(while read -r line; do echo "${line#$basepath/}"; done <<< "$code")
# In the case of inlines, move everything to same line
code=${code//$'\n'/' '}
# Replace old address with pretty line numbers
symbol="$segment$name ($code)"
}
decode_code() {
local scripts=`dirname "${BASH_SOURCE[0]}"`
echo "$1" | $scripts/decodecode
}
handle_line() {
local words
# Tokenize
read -a words <<<"$1"
# Remove hex numbers. Do it ourselves until it happens in the
# kernel
# We need to know the index of the last element before we
# remove elements because arrays are sparse
local last=$(( ${#words[@]} - 1 ))
for i in "${!words[@]}"; do
# Remove the address
if [[ ${words[$i]} =~ \[\<([^]]+)\>\] ]]; then
unset words[$i]
fi
# Format timestamps with tabs
if [[ ${words[$i]} == \[ && ${words[$i+1]} == *\] ]]; then
unset words[$i]
words[$i+1]=$(printf "[%13s\n" "${words[$i+1]}")
fi
done
if [[ ${words[$last]} =~ \[([^]]+)\] ]]; then
module=${words[$last]}
module=${module#\[}
module=${module%\]}
symbol=${words[$last-1]}
unset words[$last-1]
else
# The symbol is the last element, process it
symbol=${words[$last]}
module=
fi
unset words[$last]
parse_symbol # modifies $symbol
# Add up the line number to the symbol
echo "${words[@]}" "$symbol $module"
}
if [[ $basepath == "auto" ]] ; then
module=""
symbol="kernel_init+0x0/0x0"
parse_symbol
basepath=${symbol#kernel_init (}
basepath=${basepath%/init/main.c:*)}
fi
while read line; do
# Let's see if we have an address in the line
if [[ $line =~ \[\<([^]]+)\>\] ]] ||
[[ $line =~ [^+\ ]+\+0x[0-9a-f]+/0x[0-9a-f]+ ]]; then
# Translate address to line numbers
handle_line "$line"
# Is it a code line?
elif [[ $line == *Code:* ]]; then
decode_code "$line"
else
# Nothing special in this line, show it as is
echo "$line"
fi
done
![swh spinner](/static/img/swh-spinner.gif)
Computing file changes ...