Revision 565ce8f32ac4a233b474f401e1d3e7e1de0a31fd authored by Nikolay Aleksandrov on 27 June 2016, 16:34:42 UTC, committed by David S. Miller on 29 June 2016, 09:33:35 UTC
I made a dumb off-by-one mistake when I added the vlan stats counter dumping code. The increment should happen before the check, not after otherwise we miss one entry when we continue dumping. Fixes: a60c090361ea ("bridge: netlink: export per-vlan stats") Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
1 parent a3d2e9f
stmp_device.c
/*
* Copyright (C) 1999 ARM Limited
* Copyright (C) 2000 Deep Blue Solutions Ltd
* Copyright 2006-2007,2010 Freescale Semiconductor, Inc. All Rights Reserved.
* Copyright 2008 Juergen Beisert, kernel@pengutronix.de
* Copyright 2009 Ilya Yanok, Emcraft Systems Ltd, yanok@emcraft.com
* Copyright (C) 2011 Wolfram Sang, Pengutronix e.K.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*/
#include <linux/io.h>
#include <linux/errno.h>
#include <linux/delay.h>
#include <linux/compiler.h>
#include <linux/export.h>
#include <linux/stmp_device.h>
#define STMP_MODULE_CLKGATE (1 << 30)
#define STMP_MODULE_SFTRST (1 << 31)
/*
* Clear the bit and poll it cleared. This is usually called with
* a reset address and mask being either SFTRST(bit 31) or CLKGATE
* (bit 30).
*/
static int stmp_clear_poll_bit(void __iomem *addr, u32 mask)
{
int timeout = 0x400;
writel(mask, addr + STMP_OFFSET_REG_CLR);
udelay(1);
while ((readl(addr) & mask) && --timeout)
/* nothing */;
return !timeout;
}
int stmp_reset_block(void __iomem *reset_addr)
{
int ret;
int timeout = 0x400;
/* clear and poll SFTRST */
ret = stmp_clear_poll_bit(reset_addr, STMP_MODULE_SFTRST);
if (unlikely(ret))
goto error;
/* clear CLKGATE */
writel(STMP_MODULE_CLKGATE, reset_addr + STMP_OFFSET_REG_CLR);
/* set SFTRST to reset the block */
writel(STMP_MODULE_SFTRST, reset_addr + STMP_OFFSET_REG_SET);
udelay(1);
/* poll CLKGATE becoming set */
while ((!(readl(reset_addr) & STMP_MODULE_CLKGATE)) && --timeout)
/* nothing */;
if (unlikely(!timeout))
goto error;
/* clear and poll SFTRST */
ret = stmp_clear_poll_bit(reset_addr, STMP_MODULE_SFTRST);
if (unlikely(ret))
goto error;
/* clear and poll CLKGATE */
ret = stmp_clear_poll_bit(reset_addr, STMP_MODULE_CLKGATE);
if (unlikely(ret))
goto error;
return 0;
error:
pr_err("%s(%p): module reset timeout\n", __func__, reset_addr);
return -ETIMEDOUT;
}
EXPORT_SYMBOL(stmp_reset_block);
![swh spinner](/static/img/swh-spinner.gif)
Computing file changes ...