Revision 56fb2d6eb63acd48b50437b415b6f7d2fcffe75d authored by Josh Poimboeuf on 26 October 2016, 15:34:08 UTC, committed by Ingo Molnar on 27 October 2016, 06:20:27 UTC
The following commit: 3732710ff6f2 ("objtool: Improve rare switch jump table pattern detection") ... improved objtool's ability to detect GCC switch statement jump tables for GCC 6. However the check to allow short jumps with the scanned range of instructions wasn't quite right. The pattern detection should allow jumps to the indirect jump instruction itself. This fixes the following warning: drivers/infiniband/sw/rxe/rxe_comp.o: warning: objtool: rxe_completer()+0x315: sibling call from callable instruction with changed frame pointer Reported-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Fixes: 3732710ff6f2 ("objtool: Improve rare switch jump table pattern detection") Link: http://lkml.kernel.org/r/20161026153408.2rifnw7bvoc5sex7@treble Signed-off-by: Ingo Molnar <mingo@kernel.org>
1 parent 9fe68ca
blk-timeout.c
/*
* Functions related to generic timeout handling of requests.
*/
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/blkdev.h>
#include <linux/fault-inject.h>
#include "blk.h"
#include "blk-mq.h"
#ifdef CONFIG_FAIL_IO_TIMEOUT
static DECLARE_FAULT_ATTR(fail_io_timeout);
static int __init setup_fail_io_timeout(char *str)
{
return setup_fault_attr(&fail_io_timeout, str);
}
__setup("fail_io_timeout=", setup_fail_io_timeout);
int blk_should_fake_timeout(struct request_queue *q)
{
if (!test_bit(QUEUE_FLAG_FAIL_IO, &q->queue_flags))
return 0;
return should_fail(&fail_io_timeout, 1);
}
static int __init fail_io_timeout_debugfs(void)
{
struct dentry *dir = fault_create_debugfs_attr("fail_io_timeout",
NULL, &fail_io_timeout);
return PTR_ERR_OR_ZERO(dir);
}
late_initcall(fail_io_timeout_debugfs);
ssize_t part_timeout_show(struct device *dev, struct device_attribute *attr,
char *buf)
{
struct gendisk *disk = dev_to_disk(dev);
int set = test_bit(QUEUE_FLAG_FAIL_IO, &disk->queue->queue_flags);
return sprintf(buf, "%d\n", set != 0);
}
ssize_t part_timeout_store(struct device *dev, struct device_attribute *attr,
const char *buf, size_t count)
{
struct gendisk *disk = dev_to_disk(dev);
int val;
if (count) {
struct request_queue *q = disk->queue;
char *p = (char *) buf;
val = simple_strtoul(p, &p, 10);
spin_lock_irq(q->queue_lock);
if (val)
queue_flag_set(QUEUE_FLAG_FAIL_IO, q);
else
queue_flag_clear(QUEUE_FLAG_FAIL_IO, q);
spin_unlock_irq(q->queue_lock);
}
return count;
}
#endif /* CONFIG_FAIL_IO_TIMEOUT */
/*
* blk_delete_timer - Delete/cancel timer for a given function.
* @req: request that we are canceling timer for
*
*/
void blk_delete_timer(struct request *req)
{
list_del_init(&req->timeout_list);
}
static void blk_rq_timed_out(struct request *req)
{
struct request_queue *q = req->q;
enum blk_eh_timer_return ret = BLK_EH_RESET_TIMER;
if (q->rq_timed_out_fn)
ret = q->rq_timed_out_fn(req);
switch (ret) {
case BLK_EH_HANDLED:
/* Can we use req->errors here? */
__blk_complete_request(req);
break;
case BLK_EH_RESET_TIMER:
blk_add_timer(req);
blk_clear_rq_complete(req);
break;
case BLK_EH_NOT_HANDLED:
/*
* LLD handles this for now but in the future
* we can send a request msg to abort the command
* and we can move more of the generic scsi eh code to
* the blk layer.
*/
break;
default:
printk(KERN_ERR "block: bad eh return: %d\n", ret);
break;
}
}
static void blk_rq_check_expired(struct request *rq, unsigned long *next_timeout,
unsigned int *next_set)
{
if (time_after_eq(jiffies, rq->deadline)) {
list_del_init(&rq->timeout_list);
/*
* Check if we raced with end io completion
*/
if (!blk_mark_rq_complete(rq))
blk_rq_timed_out(rq);
} else if (!*next_set || time_after(*next_timeout, rq->deadline)) {
*next_timeout = rq->deadline;
*next_set = 1;
}
}
void blk_timeout_work(struct work_struct *work)
{
struct request_queue *q =
container_of(work, struct request_queue, timeout_work);
unsigned long flags, next = 0;
struct request *rq, *tmp;
int next_set = 0;
if (blk_queue_enter(q, true))
return;
spin_lock_irqsave(q->queue_lock, flags);
list_for_each_entry_safe(rq, tmp, &q->timeout_list, timeout_list)
blk_rq_check_expired(rq, &next, &next_set);
if (next_set)
mod_timer(&q->timeout, round_jiffies_up(next));
spin_unlock_irqrestore(q->queue_lock, flags);
blk_queue_exit(q);
}
/**
* blk_abort_request -- Request request recovery for the specified command
* @req: pointer to the request of interest
*
* This function requests that the block layer start recovery for the
* request by deleting the timer and calling the q's timeout function.
* LLDDs who implement their own error recovery MAY ignore the timeout
* event if they generated blk_abort_req. Must hold queue lock.
*/
void blk_abort_request(struct request *req)
{
if (blk_mark_rq_complete(req))
return;
if (req->q->mq_ops) {
blk_mq_rq_timed_out(req, false);
} else {
blk_delete_timer(req);
blk_rq_timed_out(req);
}
}
EXPORT_SYMBOL_GPL(blk_abort_request);
unsigned long blk_rq_timeout(unsigned long timeout)
{
unsigned long maxt;
maxt = round_jiffies_up(jiffies + BLK_MAX_TIMEOUT);
if (time_after(timeout, maxt))
timeout = maxt;
return timeout;
}
/**
* blk_add_timer - Start timeout timer for a single request
* @req: request that is about to start running.
*
* Notes:
* Each request has its own timer, and as it is added to the queue, we
* set up the timer. When the request completes, we cancel the timer.
* Queue lock must be held for the non-mq case, mq case doesn't care.
*/
void blk_add_timer(struct request *req)
{
struct request_queue *q = req->q;
unsigned long expiry;
/* blk-mq has its own handler, so we don't need ->rq_timed_out_fn */
if (!q->mq_ops && !q->rq_timed_out_fn)
return;
BUG_ON(!list_empty(&req->timeout_list));
/*
* Some LLDs, like scsi, peek at the timeout to prevent a
* command from being retried forever.
*/
if (!req->timeout)
req->timeout = q->rq_timeout;
req->deadline = jiffies + req->timeout;
/*
* Only the non-mq case needs to add the request to a protected list.
* For the mq case we simply scan the tag map.
*/
if (!q->mq_ops)
list_add_tail(&req->timeout_list, &req->q->timeout_list);
/*
* If the timer isn't already pending or this timeout is earlier
* than an existing one, modify the timer. Round up to next nearest
* second.
*/
expiry = blk_rq_timeout(round_jiffies_up(req->deadline));
if (!timer_pending(&q->timeout) ||
time_before(expiry, q->timeout.expires)) {
unsigned long diff = q->timeout.expires - expiry;
/*
* Due to added timer slack to group timers, the timer
* will often be a little in front of what we asked for.
* So apply some tolerance here too, otherwise we keep
* modifying the timer because expires for value X
* will be X + something.
*/
if (!timer_pending(&q->timeout) || (diff >= HZ / 2))
mod_timer(&q->timeout, expiry);
}
}
![swh spinner](/static/img/swh-spinner.gif)
Computing file changes ...