Revision 57be09c6e8747bf48704136d9e3f92bfb93f5725 authored by Navid Emamdoost on 02 October 2019, 03:46:07 UTC, committed by Alex Deucher on 02 October 2019, 17:58:33 UTC
In acp_hw_init there are some allocations that needs to be released in case of failure: 1- adev->acp.acp_genpd should be released if any allocation attemp for adev->acp.acp_cell, adev->acp.acp_res or i2s_pdata fails. 2- all of those allocations should be released if mfd_add_hotplug_devices or pm_genpd_add_device fail. 3- Release is needed in case of time out values expire. Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Navid Emamdoost <navid.emamdoost@gmail.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
1 parent 815fb4c
Transition-notes
Lemma 1:
If ps_tq is scheduled, ps_tq_active is 1. ps_tq_int() can be called
only when ps_tq_active is 1.
Proof: All assignments to ps_tq_active and all scheduling of ps_tq happen
under ps_spinlock. There are three places where that can happen:
one in ps_set_intr() (A) and two in ps_tq_int() (B and C).
Consider the sequnce of these events. A can not be preceded by
anything except B, since it is under if (!ps_tq_active) under
ps_spinlock. C is always preceded by B, since we can't reach it
other than through B and we don't drop ps_spinlock between them.
IOW, the sequence is A?(BA|BC|B)*. OTOH, number of B can not exceed
the sum of numbers of A and C, since each call of ps_tq_int() is
the result of ps_tq execution. Therefore, the sequence starts with
A and each B is preceded by either A or C. Moments when we enter
ps_tq_int() are sandwiched between {A,C} and B in that sequence,
since at any time number of B can not exceed the number of these
moments which, in turn, can not exceed the number of A and C.
In other words, the sequence of events is (A or C set ps_tq_active to
1 and schedule ps_tq, ps_tq is executed, ps_tq_int() is entered,
B resets ps_tq_active)*.
consider the following area:
* in do_pd_request1(): to calls of pi_do_claimed() and return in
case when pd_req is NULL.
* in next_request(): to call of do_pd_request1()
* in do_pd_read(): to call of ps_set_intr()
* in do_pd_read_start(): to calls of pi_do_claimed(), next_request()
and ps_set_intr()
* in do_pd_read_drq(): to calls of pi_do_claimed() and next_request()
* in do_pd_write(): to call of ps_set_intr()
* in do_pd_write_start(): to calls of pi_do_claimed(), next_request()
and ps_set_intr()
* in do_pd_write_done(): to calls of pi_do_claimed() and next_request()
* in ps_set_intr(): to check for ps_tq_active and to scheduling
ps_tq if ps_tq_active was 0.
* in ps_tq_int(): from the moment when we get ps_spinlock() to the
return, call of con() or scheduling ps_tq.
* in pi_schedule_claimed() when called from pi_do_claimed() called from
pd.c, everything until returning 1 or setting or setting ->claim_cont
on the path that returns 0
* in pi_do_claimed() when called from pd.c, everything until the call
of pi_do_claimed() plus the everything until the call of cont() if
pi_do_claimed() has returned 1.
* in pi_wake_up() called for PIA that belongs to pd.c, everything from
the moment when pi_spinlock has been acquired.
Lemma 2:
1) at any time at most one thread of execution can be in that area or
be preempted there.
2) When there is such a thread, pd_busy is set or pd_lock is held by
that thread.
3) When there is such a thread, ps_tq_active is 0 or ps_spinlock is
held by that thread.
4) When there is such a thread, all PIA belonging to pd.c have NULL
->claim_cont or pi_spinlock is held by thread in question.
Proof: consider the first moment when the above is not true.
(1) can become not true if some thread enters that area while another is there.
a) do_pd_request1() can be called from next_request() or do_pd_request()
In the first case the thread was already in the area. In the second,
the thread was holding pd_lock and found pd_busy not set, which would
mean that (2) was already not true.
b) ps_set_intr() and pi_schedule_claimed() can be called only from the
area.
c) pi_do_claimed() is called by pd.c only from the area.
d) ps_tq_int() can enter the area only when the thread is holding
ps_spinlock and ps_tq_active is 1 (due to Lemma 1). It means that
(3) was already not true.
e) do_pd_{read,write}* could be called only from the area. The only
case that needs consideration is call from pi_wake_up() and there
we would have to be called for the PIA that got ->claimed_cont
from pd.c. That could happen only if pi_do_claimed() had been
called from pd.c for that PIA, which happens only for PIA belonging
to pd.c.
f) pi_wake_up() can enter the area only when the thread is holding
pi_spinlock and ->claimed_cont is non-NULL for PIA belonging to
pd.c. It means that (4) was already not true.
(2) can become not true only when pd_lock is released by the thread in question.
Indeed, pd_busy is reset only in the area and thread that resets
it is holding pd_lock. The only place within the area where we
release pd_lock is in pd_next_buf() (called from within the area).
But that code does not reset pd_busy, so pd_busy would have to be
0 when pd_next_buf() had acquired pd_lock. If it become 0 while
we were acquiring the lock, (1) would be already false, since
the thread that had reset it would be in the area simulateously.
If it was 0 before we tried to acquire pd_lock, (2) would be
already false.
For similar reasons, (3) can become not true only when ps_spinlock is released
by the thread in question. However, all such places within the area are right
after resetting ps_tq_active to 0.
(4) is done the same way - all places where we release pi_spinlock within
the area are either after resetting ->claimed_cont to NULL while holding
pi_spinlock, or after not tocuhing ->claimed_cont since acquiring pi_spinlock
also in the area. The only place where ->claimed_cont is made non-NULL is
in the area, under pi_spinlock and we do not release it until after leaving
the area.
QED.
Corollary 1: ps_tq_active can be killed. Indeed, the only place where we
check its value is in ps_set_intr() and if it had been non-zero at that
point, we would have violated either (2.1) (if it was set while ps_set_intr()
was acquiring ps_spinlock) or (2.3) (if it was set when we started to
acquire ps_spinlock).
Corollary 2: ps_spinlock can be killed. Indeed, Lemma 1 and Lemma 2 show
that the only possible contention is between scheduling ps_tq followed by
immediate release of spinlock and beginning of execution of ps_tq on
another CPU.
Corollary 3: assignment to pd_busy in do_pd_read_start() and do_pd_write_start()
can be killed. Indeed, we are not holding pd_lock and thus pd_busy is already
1 here.
Corollary 4: in ps_tq_int() uses of con can be replaced with uses of
ps_continuation, since the latter is changed only from the area.
We don't need to reset it to NULL, since we are guaranteed that there
will be a call of ps_set_intr() before we look at ps_continuation again.
We can remove the check for ps_continuation being NULL for the same
reason - the value is guaranteed to be set by the last ps_set_intr() and
we never pass it NULL. Assignements in the beginning of ps_set_intr()
can be taken to callers as long as they remain within the area.
![swh spinner](/static/img/swh-spinner.gif)
Computing file changes ...