swh:1:snp:c2847dfd741eae21606027cf29250d1ebcd63fb4
Revision 57eb81b14e35a14df64ac3597bc90c26ce04a9b4 authored by Manjunatha GK on 11 December 2009, 05:39:08 UTC, committed by Ben Dooks on 24 December 2009, 01:30:54 UTC
Current OMAP3 I2C driver code does not follow the correct sequence for soft
reset. Due to this, lock up issues are reported during timeout/error cases.

This patch fixes above issue by disabling I2C controller as per OMAP3430 TRM
for soft reset. As per TRM, I2C controller needs to be disabled as a first
step during soft reset.

Here is correct soft reset sequence:
a. Ensure that the module is disabled
(clear the I2Ci.I2C_CON[15] I2C_EN bit to 0).
b. Set the I2Ci.I2C_SYSC[1] SRST bit to 1.
c. Enable the module by setting I2Ci.I2C_CON[15] I2C_EN bit to 1.
d. Check the I2Ci.I2C_SYSS[0] RDONE bit until it is set to 1 to
indicate the software reset is complete.

Tested on Zoom2, Zoom3, 3430SDP and 3630SDP

Signed-off-by: Manjunatha GK <manjugk@ti.com>
Signed-off-by: George, Harith<harith@ti.com>
Acked-by: Varadarajan, Charu Latha<charu@ti.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
1 parent 07ac31f
History
Tip revision: 53d5fc89d66a778577295020dc57bb3ccec84354 authored by Linus Torvalds on 01 October 2021, 21:45:23 UTC
Merge tag 's390-5.15-4' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Tip revision: 53d5fc8
File Mode Size
Documentation
arch
block
crypto
drivers
firmware
fs
include
init
ipc
kernel
lib
mm
net
samples
scripts
security
sound
tools
usr
virt
.gitignore -rw-r--r-- 835 bytes
.mailmap -rw-r--r-- 3.9 KB
COPYING -rw-r--r-- 18.3 KB
CREDITS -rw-r--r-- 91.8 KB
Kbuild -rw-r--r-- 2.4 KB
MAINTAINERS -rw-r--r-- 160.5 KB
Makefile -rw-r--r-- 52.0 KB
README -rw-r--r-- 17.0 KB
REPORTING-BUGS -rw-r--r-- 3.3 KB

README

back to top