Revision 5846a73f26a1efa45e2c2edd36aa2ed0a6ad380a authored by Navare, Manasi D on 17 July 2017, 22:05:22 UTC, committed by Daniel Vetter on 27 July 2017, 20:07:22 UTC
The condition for setting the Loadgen Select bit of
PORT_TX_DW4 register during DDI Vswing Sequence should be
Bit rate <=6 GHz whereas the existing code checks only
Bit Rate < 6GHz. This patch fixes this condition.
While at it also remove the redundant paranthesis.
Fixes: cf54ca8bc567 ("drm/i915/cnl: Implement voltage swing sequence.")
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Manasi Navare <manasi.d.navare@intel.com>
Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1500329122-32662-1-git-send-email-manasi.d.navare@intel.com
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
(cherry picked from commit a8e45a1c42d11597e975f3e5f2fe182f90cdaa7f)
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
1 parent 283d686
Makefile
obj-$(CONFIG_CRYPTO_DEV_ATMEL_AES) += atmel-aes.o
obj-$(CONFIG_CRYPTO_DEV_ATMEL_SHA) += atmel-sha.o
obj-$(CONFIG_CRYPTO_DEV_ATMEL_TDES) += atmel-tdes.o
obj-$(CONFIG_CRYPTO_DEV_BFIN_CRC) += bfin_crc.o
obj-$(CONFIG_CRYPTO_DEV_CAVIUM_ZIP) += cavium/
obj-$(CONFIG_CRYPTO_DEV_CCP) += ccp/
obj-$(CONFIG_CRYPTO_DEV_CHELSIO) += chelsio/
obj-$(CONFIG_CRYPTO_DEV_CPT) += cavium/cpt/
obj-$(CONFIG_CRYPTO_DEV_NITROX) += cavium/nitrox/
obj-$(CONFIG_CRYPTO_DEV_EXYNOS_RNG) += exynos-rng.o
obj-$(CONFIG_CRYPTO_DEV_FSL_CAAM) += caam/
obj-$(CONFIG_CRYPTO_DEV_GEODE) += geode-aes.o
obj-$(CONFIG_CRYPTO_DEV_HIFN_795X) += hifn_795x.o
obj-$(CONFIG_CRYPTO_DEV_IMGTEC_HASH) += img-hash.o
obj-$(CONFIG_CRYPTO_DEV_IXP4XX) += ixp4xx_crypto.o
obj-$(CONFIG_CRYPTO_DEV_MV_CESA) += mv_cesa.o
obj-$(CONFIG_CRYPTO_DEV_MARVELL_CESA) += marvell/
obj-$(CONFIG_CRYPTO_DEV_MEDIATEK) += mediatek/
obj-$(CONFIG_CRYPTO_DEV_MXS_DCP) += mxs-dcp.o
obj-$(CONFIG_CRYPTO_DEV_MXC_SCC) += mxc-scc.o
obj-$(CONFIG_CRYPTO_DEV_NIAGARA2) += n2_crypto.o
n2_crypto-y := n2_core.o n2_asm.o
obj-$(CONFIG_CRYPTO_DEV_NX) += nx/
obj-$(CONFIG_CRYPTO_DEV_OMAP) += omap-crypto.o
obj-$(CONFIG_CRYPTO_DEV_OMAP_AES) += omap-aes-driver.o
omap-aes-driver-objs := omap-aes.o omap-aes-gcm.o
obj-$(CONFIG_CRYPTO_DEV_OMAP_DES) += omap-des.o
obj-$(CONFIG_CRYPTO_DEV_OMAP_SHAM) += omap-sham.o
obj-$(CONFIG_CRYPTO_DEV_PADLOCK_AES) += padlock-aes.o
obj-$(CONFIG_CRYPTO_DEV_PADLOCK_SHA) += padlock-sha.o
obj-$(CONFIG_CRYPTO_DEV_PICOXCELL) += picoxcell_crypto.o
obj-$(CONFIG_CRYPTO_DEV_PPC4XX) += amcc/
obj-$(CONFIG_CRYPTO_DEV_QAT) += qat/
obj-$(CONFIG_CRYPTO_DEV_QCE) += qce/
obj-$(CONFIG_CRYPTO_DEV_ROCKCHIP) += rockchip/
obj-$(CONFIG_CRYPTO_DEV_S5P) += s5p-sss.o
obj-$(CONFIG_CRYPTO_DEV_SAHARA) += sahara.o
obj-$(CONFIG_CRYPTO_DEV_STM32) += stm32/
obj-$(CONFIG_CRYPTO_DEV_SUN4I_SS) += sunxi-ss/
obj-$(CONFIG_CRYPTO_DEV_TALITOS) += talitos.o
obj-$(CONFIG_CRYPTO_DEV_UX500) += ux500/
obj-$(CONFIG_CRYPTO_DEV_VIRTIO) += virtio/
obj-$(CONFIG_CRYPTO_DEV_VMX) += vmx/
obj-$(CONFIG_CRYPTO_DEV_BCM_SPU) += bcm/
obj-$(CONFIG_CRYPTO_DEV_SAFEXCEL) += inside-secure/
Computing file changes ...
