| 5a87df8 | Da Xue | 22 June 2021, 02:39:19 UTC | autoboot: fix typos of CONFIG_AUTOBOOT_USE_MENUKEY Replace typo CONFIG_USE_AUTOBOOT_MENUKEY with CONFIG_AUTOBOOT_USE_MENUKEY as when they were introduced initially there was some mismatch in which name was used where. Fixes: 8fc31e23aa83 ("autoboot: Rename CONFIG_MENUKEY to CONFIG_AUTOBOOT_MENUKEY") Signed-off-by: Da Xue <da@libre.computer> | 22 June 2021, 18:01:22 UTC |
| c7d1b18 | Christian Melki | 07 June 2021, 09:21:15 UTC | disk/part_dos.c: Fix a variable typo in write_mbr_partitions() This function is passed *dev not *dev_desc, so pass the right name to part_init(). Fixes: f14c5ee5ab8b ("disk: part_dos: update partition table entries after write") Signed-off-by: Christian Melki <christian.melki@t2data.com> | 22 June 2021, 17:58:08 UTC |
| 1ce892c | Bin Meng | 21 June 2021, 23:33:21 UTC | azure: Use msys2 20210604 installer for Windows build MSYS2 Windows build started to fail since yesterday (Jun 21): checking keyring... checking package integrity... error: gcc-libs: signature from "David Macek <david.macek.0@gmail.com>" is unknown trust :: File /var/cache/pacman/pkg/gcc-libs-10.2.0-1-x86_64.pkg.tar.zst is corrupted (invalid or corrupted package (PGP signature)). error: gcc: signature from "David Macek <david.macek.0@gmail.com>" is unknown trust :: File /var/cache/pacman/pkg/gcc-10.2.0-1-x86_64.pkg.tar.zst is corrupted (invalid or corrupted package (PGP signature)). error: failed to commit transaction (invalid or corrupted package) Errors occurred, no packages were upgraded. Switching to the latest installer (version 20210604) seems to fix it. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Tom Rini <trini@konsulko.com> Tested-by: Tom Rini <trini@konsulko.com> | 22 June 2021, 13:06:03 UTC |
| 97c8cb5 | Tom Rini | 18 June 2021, 15:18:56 UTC | Merge branch 'network_master' of https://source.denx.de/u-boot/custodians/u-boot-net | 18 June 2021, 15:18:56 UTC |
| 54c321f | Tim Harvey | 17 June 2021, 23:08:54 UTC | net: octeontx: smi: use dt live tree API clean up octeontx_smi_probe by using the live-tree API. Signed-off-by: Tim Harvey <tharvey@gateworks.com> Reviewed-by: Stefan Roese <sr@denx.de> Reviewed-by: Ramon Fried <rfried.dev@gmail.com> | 18 June 2021, 08:29:17 UTC |
| 75efe7d | Dimitri John Ledkov | 21 April 2021, 11:42:01 UTC | cmd: pxe_utils: sysboot: fix crash if either board or soc are not set. If the environment does not have "soc" or "board" set, and fdtdir option is specified in extlinux.conf, the bootloader will crash whilst dereferencing a null pointer. Add a guard against null soc or board. Fixes a crash of qemu-riscv64_smode configuration, which does not have CONFIG_SYS_SOC defined. Signed-off-by: Dimitri John Ledkov <xnox@ubuntu.com> Reviewed-by: Ramon Fried <rfried.dev@gmail.com> | 18 June 2021, 08:29:17 UTC |
| 82a3c9e | Michael Walle | 25 February 2021, 15:51:11 UTC | net: use the same alias stem for ethernet as linux Linux uses the prefix "ethernet" whereas u-boot uses "eth". This is from the linux tree: $ grep "eth[0-9].*=.*&" arch/**/*dts{,i}|wc -l 0 $ grep "ethernet[0-9].*=.*&" arch/**/*dts{,i}|wc -l 633 In u-boot device trees both prefixes are used. Until recently the only user of the ethernet alias was the sandbox test device tree. This changed with commit fc054d563bfb ("net: Introduce DSA class for Ethernet switches"). There, the MAC addresses are inherited based on the devices sequence IDs which is in turn given by the device tree. Before there are more users in u-boot and both worlds will differ even more, rename the alias prefix to "ethernet" to match the linux ones. Also adapt the test cases and rename any old aliases in the u-boot device trees. Cc: David Wu <david.wu@rock-chips.com> Signed-off-by: Michael Walle <michael@walle.cc> Reviewed-by: Fabio Estevam <festevam@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org> | 18 June 2021, 08:29:17 UTC |
| 6e424b4 | Michael Walle | 24 February 2021, 16:30:44 UTC | net: use a more deterministic approach to get the active ethernet device If the environment variable "ethact" is not set, the first device in the uclass is returned. This depends on the probing order of the ethernet devices. Moreover it is not not configurable at all. Try to return the ethernet device with sequence id 0 first which then can be configured by the aliases in a device tree. Fall back to the old mechanism in case of an error. Signed-off-by: Michael Walle <michael@walle.cc> Reviewed-by: Ramon Fried <rfried.dev@gmail.com> | 18 June 2021, 08:29:17 UTC |
| 02036d9 | Heinrich Schuchardt | 03 June 2021, 07:52:41 UTC | net: sun8i-emac: fix MDIO frequency Commit 4f0278dac56a ("net: sun8i-emac: Lower MDIO frequency") leads to network failure on the OrangePi PC. => dhcp sun8i_emac_eth_start: Timeout According to the commit message the change of the MDIO frequency is only required for external PHYs. Fixes: 4f0278dac56a ("net: sun8i-emac: Lower MDIO frequency") Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> | 18 June 2021, 08:29:17 UTC |
| eab447b | Jassi Brar | 04 June 2021, 09:44:38 UTC | net: synquacer: Add netsec driver Add SynQuacer's NETSEC GbE controller driver. Since this driver will load the firmware from SPI NOR flash, this depends on CONFIG_SYNQUACER_SPI=y. Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org> Reviewed-by: Ramon Fried <rfried.dev@gmail.com> | 18 June 2021, 08:29:17 UTC |
| f024e0b | Daniil Stas | 30 May 2021, 13:34:09 UTC | net: dwc_eth_qos: Revert some changes of commit 3a97da12ee7b Revert some changes of commit 3a97da12ee7b ("net: dwc_eth_qos: add dwc eqos for imx support") that were probably added by mistake. One of these changes can lead to received data corruption (enabling FUP and FEP bits). Another causes invalid register rxq_ctrl0 settings for some platforms. And another makes some writes at unknown memory location. Fixes: 3a97da12ee7b ("net: dwc_eth_qos: add dwc eqos for imx support") Signed-off-by: Daniil Stas <daniil.stas@posteo.net> Cc: Ye Li <ye.li@nxp.com> Cc: Fugang Duan <fugang.duan@nxp.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Ramon Fried <rfried.dev@gmail.com> Cc: Joe Hershberger <joe.hershberger@ni.com> Cc: Patrice Chotard <patrice.chotard@foss.st.com> Cc: Patrick Delaunay <patrick.delaunay@foss.st.com> Reviewed-by: Ramon Fried <rfried.dev@gmail.com> | 18 June 2021, 08:29:17 UTC |
| 07292f8 | Daniil Stas | 23 May 2021, 22:24:48 UTC | net: dwc_eth_qos: Fix needless phy auto-negotiation restarts Disabling clk_ck clock leads to link up status loss in phy, which leads to auto-negotiation restart before each network command execution. This issue is especially big for PXE boot protocol because of auto-negotiation restarts before each configuration filename trial. To avoid this issue don't disable clk_ck clock after it was enabled. Signed-off-by: Daniil Stas <daniil.stas@posteo.net> Cc: Ramon Fried <rfried.dev@gmail.com> Cc: Joe Hershberger <joe.hershberger@ni.com> Cc: Patrick Delaunay <patrick.delaunay@foss.st.com> Cc: Patrice Chotard <patrice.chotard@foss.st.com> Reviewed-by: Ramon Fried <rfried.dev@gmail.com> | 18 June 2021, 08:29:17 UTC |
| 7001863 | Tim Harvey | 16 April 2021, 20:25:09 UTC | net: e1000: do not attempt to set hwaddr for i210 without FLASH commit f1bcad22dd19 ("net: e1000: add support for writing to EEPROM") adds support for storing hwaddr in EEPROM however i210 devices do not support this and thus results in errors such as: Warning: e1000#0 failed to set MAC address' Check if a flash device is present and if not return -ENOSYS indicating this is not supported. Signed-off-by: Tim Harvey <tharvey@gateworks.com> Reviewed-by: Ramon Fried <rfried.dev@gmail.com> | 18 June 2021, 08:29:17 UTC |
| 3e18487 | Hou Zhiqiang | 12 June 2021, 18:15:41 UTC | Fix a memory leak issue in the RX port initialization. Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com> Reviewed-by: Ramon Fried <rfried.dev@gmail.com> | 18 June 2021, 08:29:17 UTC |
| a298d4f | Tom Rini | 17 June 2021, 12:44:56 UTC | Merge https://gitlab.denx.de/u-boot/custodians/u-boot-fsl-qoriq - fsl-qoriq: Bug fixes related pfe, eth, thermal node, vid.c, cpu release, mmc, usb, env, etc for Layerscape boards - powerpc: Update Maintainers for some boards. | 17 June 2021, 12:44:56 UTC |
| 7e585b5 | Tom Rini | 17 June 2021, 12:44:23 UTC | Merge branch 'master' of https://source.denx.de/u-boot/custodians/u-boot-riscv - ae350 related dts fixes. | 17 June 2021, 12:44:23 UTC |
| b7efcaf | Priyanka Jain | 17 June 2021, 07:22:46 UTC | board: freescale: t1028xrdb: Add MAINTAINER for revD Add Priyanka Jain as MAINTAINER for T2080RDB_revD_defconfig, T2080RDB_revD_NAND_defconfig, T2080RDB_revD_SDCARD_defconfig and T2080RDB_revD_SPIFLASH_defconfig Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com> | 17 June 2021, 07:22:54 UTC |
| 390c73b | Ran Wang | 16 June 2021, 12:23:19 UTC | armv8: Update erratum number to align with doc Change the USB erratum number A-050106 to A-050204 as A-050106 is a duplicate and never be published. Fixes 0cfa00cdb94 (“armv8: Add workaround for USB erratum A-050106”) Signed-off-by: Ran Wang <ran.wang_1@nxp.com> [Rebased] Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com> | 17 June 2021, 06:16:11 UTC |
| 13ea307 | Camelia Groza | 11 June 2021, 12:28:08 UTC | board: freescale: t208xrdb: add a config option for rev D dts fixups Under DM, we rely on u-boot's device tree to provide the correct PHY addresses. The board_fix_fdt callback is intended to be used for device tree fixups before relocation. Unfortunately, this isn't an option when booting from flash since the device tree isn't writable before relocation. This patch introduces the CONFIG_T2080RDB_REV_D option to signal that a board revision D or up is the target. The config option is used to set the correct Aquantia PHY address in the board's u-boot device tree. Defconfig files with the option enable explicitly are added for convenience. Signed-off-by: Camelia Groza <camelia.groza@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com> | 17 June 2021, 06:16:11 UTC |
| 4e21a55 | Camelia Groza | 16 June 2021, 12:17:31 UTC | board: freescale: t208xrdb: add Linux fdt fix-ups for rev D The T2080RDB boards revisions D and up have updated 10G Aquantia PHYs connected to MAC1 and MAC2. The second Aquantia PHY is located at a different address on the MDIO bus compared to rev C (0x8 instead of 0x1). Fix-up the Linux device tree to update the PHY address for the second Aquantia PHY on boards revisions D and up. Also rename the PHY node to reflect the changes. Signed-off-by: Camelia Groza <camelia.groza@nxp.com> [Rebased] Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com> | 17 June 2021, 06:16:11 UTC |
| c91b130 | Camelia Groza | 11 June 2021, 12:28:06 UTC | board: freescale: t208xrdb: detect the board revision version Detect and print the board revision version based on the CPLD registers. Signed-off-by: Camelia Groza <camelia.groza@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com> | 17 June 2021, 06:16:11 UTC |
| a484f7c | Camelia Groza | 11 June 2021, 12:28:05 UTC | board: freescale: t208xrdb: remove the legacy non-DM_ETH code Both DM_ETH and DM_PCI are enabled for the T2080RDB board. Remove the board_eth_init() callback and the non-DM_ETH code paths since they are not needed anymore. Signed-off-by: Camelia Groza <camelia.groza@nxp.com> Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com> | 17 June 2021, 06:16:11 UTC |
| 11eeeef | Aleksandar Gerasimovski | 08 June 2021, 14:25:21 UTC | pg-wcom-ls102xa: fix sys counter frequency A system clock of 66MHz was chosen for the pg-wcom-ls102xa. Compared to the Evalboard, this corresponds to a reduction of 1/3. The system counter clock should have been reduced accordingly, but that was not the case, so we had a system time that was 1/3 behind the real time. This patch corrects the system counter clock to 8.333MHz = 66.667MHz / 8. Signed-off-by: Rainer Boschung <rainer.boschung@hitachi-powergrids.com> Signed-off-by: Aleksandar Gerasimovski <aleksandar.gerasimovski@hitachi-powergrids.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com> | 17 June 2021, 06:16:11 UTC |
| 02802eb | Aleksandar Gerasimovski | 08 June 2021, 14:24:32 UTC | pg-wcom-ls102x: initialize front led and app buf This patch adds the front led initialization and the application buffer enable to the eraly board inititlaization. Signed-off-by: Rainer Boschung <rainer.boschung@hitachi-powergrids.com> Signed-off-by: Aleksandar Gerasimovski <aleksandar.gerasimovski@hitachi-powergrids.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com> | 17 June 2021, 06:16:11 UTC |
| ccbd2ce | Aleksandar Gerasimovski | 08 June 2021, 14:23:34 UTC | km: ls102x: update device disable configuration acc hw design desc In order to improve power consumption ls102x allows to disable peripherals that are not in use. This patch follows SELI8 HW design description and disables peripherals that are not in use in our designs, the same configuration is applicable and for EXPU1. This patch uses available hwconfig option for updating ls102x device disable configuration. Signed-off-by: Aleksandar Gerasimovski <aleksandar.gerasimovski@hitachi-powergrids.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com> | 17 June 2021, 06:16:11 UTC |
| fd49502 | Aleksandar Gerasimovski | 08 June 2021, 14:21:15 UTC | km: ls102x: set ethrotate envvar to no The default behavior in the latest u-boot revisions is to rotate the active net device to the next available if the requested link is not established. For our ls102x based devices this would mean that if active debug net device is not available, u-boot will rotate and set the next net device that is one of the estar adapters. To return from this situation manual action to set correct ethact adapter will be needed and this can be annoying when working in debug mode. Setting ethrotate=no will disable net adapter rotation and will make sure that the primary adapter is always used. Signed-off-by: Aleksandar Gerasimovski <aleksandar.gerasimovski@hitachi-powergrids.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com> | 17 June 2021, 06:16:11 UTC |
| fbb0e15 | Aleksandar Gerasimovski | 08 June 2021, 14:20:13 UTC | km/scripts: fix saveenv command syntax This is most probably a typo, and in older u-uboot versions is same as 'saveenv', in the newer uboot versions there is a separate 'save' command that is different from 'saveenv'. Signed-off-by: Aleksandar Gerasimovski <aleksandar.gerasimovski@hitachi-powergrids.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com> | 17 June 2021, 06:16:11 UTC |
| a098064 | Aleksandar Gerasimovski | 08 June 2021, 14:19:08 UTC | km: ls102xa: add missing define for PRAM regions In our designs we reserve PRAM area at the end of the RAM, and in order this area to be visible and taken into account by the u-boot memory mgmt CONFIG_PRAM has to be defined. Signed-off-by: Aleksandar Gerasimovski <aleksandar.gerasimovski@hitachi-powergrids.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com> | 17 June 2021, 06:16:11 UTC |
| 3aea3dd | Aleksandar Gerasimovski | 08 June 2021, 14:17:34 UTC | km/ls102xa: add support for u-boot POST memory test From production view this is standard test executed during production on all linux based foxmc cards. On CENT2 HW defined memory region is zero means that some DDR accesses are done by memory_post_dataline and memory_post_addrline but pattern tests are skipped that's why mem_regions is fast there. On ls102x for the complete DDR region of 1GiB memory_regions_post_test takes approx. 4min and this is too much for production, so this patch defines only 1MiB region as compromise. Signed-off-by: Aleksandar Gerasimovski <aleksandar.gerasimovski@hitachi-powergrids.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com> | 17 June 2021, 06:16:11 UTC |
| a7fd6fa | Aleksandar Gerasimovski | 08 June 2021, 14:16:28 UTC | board/km: add support for expu1 design based on nxp The EXPU1 design is a new 40G capable ethernet service unit card for Hitachi-Powergrids wired-com product lines. The base SoC is same as for already added SELI8 card, consequently the already added u-boot support for SELI8 is reused. Signed-off-by: Rainer Boschung <rainer.boschung@hitachi-powergrids.com> Signed-off-by: Aleksandar Gerasimovski <aleksandar.gerasimovski@hitachi-powergrids.com> [Fixed new line error at EOF] Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com> | 17 June 2021, 06:16:11 UTC |
| 0b036d4 | Priyanka Jain | 08 June 2021, 08:07:01 UTC | board: freescale: t102xrdb: Add MAINTAINER Add "Priyanka Jain <priyanka.jain@nxp.com>" as MAINTAINER for t102xrdb board. Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com> | 17 June 2021, 06:16:11 UTC |
| eccf98f | Priyanka Jain | 08 June 2021, 08:07:00 UTC | board: freescale: p2041rdb: Add MAINTAINER Add "Priyanka Jain <priyanka.jain@nxp.com>" as MAINTAINER for p2041rdb board. Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com> | 17 June 2021, 06:16:11 UTC |
| 6d1657b | Priyanka Jain | 08 June 2021, 08:06:59 UTC | board: freescale: p1_p2_rdb_pc: Add MAINTAINER Add "Priyanka Jain <priyanka.jain@nxp.com>" as MAINTAINER for p1_p2_rdb_pc board. Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com> | 17 June 2021, 06:16:11 UTC |
| 0eb946e | Priyanka Jain | 08 June 2021, 08:06:58 UTC | board: freescale: t4rdb: Add MAINTAINER Add "Priyanka Jain <priyanka.jain@nxp.com>" as MAINTAINER for t4rdb board. Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com> | 17 June 2021, 06:16:11 UTC |
| fb6c96f | Lasse Klok Mikkelsen | 08 June 2021, 06:39:12 UTC | arm: dts: ls1021a.dtsi: Fix invalid reg on gpio nodes Address and size cells on SOC are set to 1. But gpio nodes are specified with 2 cells. This fixes the gpio nodes to correct cells. Signed-off-by: Lasse Klok Mikkelsen <lkmi@prevas.dk> Reviewed-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com> | 17 June 2021, 06:16:11 UTC |
| 50dae8e | Aleksandar Gerasimovski | 04 June 2021, 13:40:58 UTC | net: tsec: add option to set device max-speed via dts Current tsec adapter sets adapter gigabit capabilities by default, and in reality this must not always be the case. It is possible that tsec adapter is used for 100Mbps connection, and in this case setting 1000Mbps capabilities can lead to some side effects such longer autoneg process. In our ls102x designs this problem leads to long autoneg times (> 4 sec) in case board rgmii link is 100Mbps capable only. Limiting the rgmii link capabilities provides faster and smoother link establishment. Signed-off-by: Aleksandar Gerasimovski <aleksandar.gerasimovski@hitachi-powergrids.com> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com> | 17 June 2021, 06:16:11 UTC |
| 0753603 | Aleksandar Gerasimovski | 04 June 2021, 09:25:00 UTC | keymile: common: fix hexadecimal env variable format Commit df86d32 breaks linux kernel and product application boot. Linux kernel and our product application scripts are expecting 0x prefix for hexadecimal values, while env_set_hex writes them without a prefix. This patch partially revert env_set_hex usage for affected env variables. Signed-off-by: Aleksandar Gerasimovski <aleksandar.gerasimovski@hitachi-powergrids.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com> | 17 June 2021, 06:16:11 UTC |
| 058c08d | Aleksandar Gerasimovski | 04 June 2021, 09:17:56 UTC | configs: seli8: set envsize to 0x4000 During the mainlining of the board this was by mistake set to sector size. Our user space env scripts are expecting envsize of 0x4000, and setting this differently will break our cross-platform compatibility. Signed-off-by: Aleksandar Gerasimovski <aleksandar.gerasimovski@hitachi-powergrids.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com> | 17 June 2021, 06:16:11 UTC |
| 34f39ce | Yangbo Lu | 03 June 2021, 02:51:19 UTC | armv8: layerscape: drop CONFIG_SYS_FSL_MMC_HAS_CAPBLT_VS33 Drop CONFIG_SYS_FSL_MMC_HAS_CAPBLT_VS33. CONFIG_FSL_ESDHC_VS33_NOT_SUPPORT is used instead. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Acked-by: Michael Walle <michael@walle.cc> [for kontron-sl28] Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com> | 17 June 2021, 06:16:11 UTC |
| b1d5986 | Yangbo Lu | 03 June 2021, 02:51:18 UTC | mmc: fsl_esdhc_imx: drop CONFIG_SYS_FSL_MMC_HAS_CAPBLT_VS33 There is no i.MX board using such option. Drop it. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com> | 17 June 2021, 06:16:11 UTC |
| ae7020b | Yangbo Lu | 03 June 2021, 02:51:17 UTC | mmc: fsl_esdhc: convert to CONFIG_FSL_ESDHC_VS33_NOT_SUPPORT For eSDHC, power supply is through peripheral circuit. Some eSDHC versions have value 0 of the bit but that does not reflect the truth. 3.3V is common for SD/MMC, and is supported for all boards with eSDHC in current u-boot. So, make 3.3V is supported in default in code. CONFIG_FSL_ESDHC_VS33_NOT_SUPPORT can be enabled if future board does not support 3.3V. This is also a fix-up for one previous patch, which converted to use IS_ENABLED() for CONFIG_SYS_FSL_MMC_HAS_CAPBLT_VS33 that is not a Kconfig option. Fixes: 52faec31827e ("mmc: fsl_esdhc: replace most #ifdefs by IS_ENABLED()") Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com> | 17 June 2021, 06:16:11 UTC |
| 6bc2419 | Matt Merhar | 30 May 2021, 00:16:17 UTC | board: freescale: p2041rdb: use correct EEPROM address length These boards, according to the schematic and per the board I own, use an M24256-BWDW6TP I2C EEPROM which requires two address bytes. This fixes the 'mac' command which is used to program, among other things, the MAC addresses for the ethernet interfaces on the board. Signed-off-by: Matt Merhar <mattmerhar@protonmail.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com> | 17 June 2021, 06:16:11 UTC |
| 8bb2085 | Biwen Li | 21 May 2021, 07:15:06 UTC | configs: ls2088aqds: fix synchronous exception IFC NOR flash base address of ls2088a is 0x580000000, and offset of env crc is 0x500000, so fix the macro CONFIG_ENV_ADDR to fix synchronous exception(access illegal address) Fixes: 59071804c1 ("configs: ls2080a: Correct ENV_ADDR value") Signed-off-by: Biwen Li <biwen.li@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com> | 17 June 2021, 06:16:11 UTC |
| effcb1e | Kuldeep Singh | 19 May 2021, 11:10:12 UTC | configs: ls1088a: Enable CONFIG_SYS_RELOC_ENV_ADDR Signed-off-by: Kuldeep Singh <kuldeep.singh@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com> | 17 June 2021, 06:16:11 UTC |
| 38d1a18 | Yangbo Lu | 14 May 2021, 02:33:57 UTC | arm: dts: lx2162aqds: support eMMC HS400 mode on esdhc1 Add properties related to eMMC HS400 mode for esdhc1. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com> | 17 June 2021, 06:16:11 UTC |
| 8e221b4 | Hou Zhiqiang | 13 May 2021, 06:54:32 UTC | pci: layerscape-ep: Add check of the PCIe controller enablement Stop to initialize the PCIe controller if it's disabled by RCW. Fixes: 118e58e26eba ("pci: layerscape: Split the EP and RC driver") Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com> | 17 June 2021, 06:16:11 UTC |
| ff64e9a | Chaitanya Sakinam | 07 May 2021, 04:22:05 UTC | armv8: ls1012a: Pass PPFE firmware to Linux through FDT Read Linux PPFE firmware from flash partition and pass it to Linux through FDT entry. So that we can avoid placing PPFE firmware in Linux rootfs. (FDT may increase at max by 64KB) Signed-off-by: Chaitanya Sakinam <chaitanya.sakinam@nxp.com> Signed-off-by: Anji J <anji.jagarlmudi@nxp.com> Signed-off-by: Biwen Li <biwen.li@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com> | 17 June 2021, 06:16:11 UTC |
| addec35 | Yangbo Lu | 27 April 2021, 08:42:11 UTC | armv8: layerscape: enable eMMC HS400 workarounds for LX2160A/LX2162A Enable eMMC HS400 workarounds for LX2160A/LX2162A. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com> | 17 June 2021, 06:16:11 UTC |
| 84c2e04 | Jiafei Pan | 21 April 2021, 04:12:49 UTC | armv8: layerscape: add PSCI support for cpu release For cpu release command, check whether PSCI is supported firstly, if supported, use PSCI to kick off secondary cores, otherwise still use spin table. Signed-off-by: Jiafei Pan <Jiafei.Pan@nxp.com> [Fixed checkpatch alignment CHECKs] Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com> | 17 June 2021, 06:16:11 UTC |
| c0eeb73 | Priyanka Singh | 19 April 2021, 05:45:04 UTC | board: freescale: vid.c: Add check for return value of adjust_vdd() Add check for return value of adjust_vdd() Signed-off-by: Biwen Li <biwen.li@nxp.com> Signed-off-by: Priyanka Singh <priyanka.singh@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com> | 17 June 2021, 06:16:11 UTC |
| 62ce0a0 | Bin Meng | 15 June 2021, 05:45:57 UTC | riscv: andes_plic: Fix riscv_get_ipi() mask Current logic in riscv_get_ipi() for Andes PLICSW does not look correct. The mask to test IPI pending bits for a hart should be left shifted by (8 * gd->arch.boot_hart), just the same as what is done in riscv_send_ipi(). Fixes: 8b3e97badf97 ("riscv: add functions for reading the IPI status") Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Rick Chen <rick@andestech.com> Tested-by: Rick Chen <rick@andestech.com> | 17 June 2021, 01:39:46 UTC |
| 279de75 | Bin Meng | 04 June 2021, 23:00:30 UTC | riscv: ae350: doc: Remove CONFIG_SKIP_LOWLEVEL_INIT The doc says CONFIG_SKIP_LOWLEVEL_INIT is in ax25-ae350.h, while actually it is not. Remove it. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Rick Chen <rick@andestech.com> | 17 June 2021, 01:39:18 UTC |
| 77eae0e | Bin Meng | 04 June 2021, 05:51:13 UTC | riscv: ae350: dts: Add missing "u-boot, dm-spl" for SPL config At present the AE350 SPL defconfig is using OF_PRIOR_STAGE. The intention was to use gdb to load device tree before running U-Boot SPL/proper from RAM. When we switch to OF_SEPARATE we will have to use our own DT but without "u-boot,dm-spl" in several essential nodes, SPL does not boot. Let's add all the required "u-boot,dm-spl" for SPL config. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Rick Chen <rick@andestech.com> | 17 June 2021, 01:39:08 UTC |
| 048aff6 | Bin Meng | 04 June 2021, 05:51:12 UTC | riscv: ae350: dts: Fix #interrupt-cells for plic0 in 32-bit All the device nodes that refer to plic0 as their interrupt parent have 2 cells encoded in their interrupts property, but plic0 only provides 1 cell in #interrupt-cells which is incorrect. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Rick Chen <rick@andestech.com> Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com> | 17 June 2021, 01:39:08 UTC |
| f050dd2 | Bin Meng | 04 June 2021, 05:51:11 UTC | riscv: ae350: dts: Remove the unnecessary #address-cells in plic nodes PLIC nodes don't have child nodes, so #address-cells is not needed. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Rick Chen <rick@andestech.com> Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com> | 17 June 2021, 01:39:08 UTC |
| 5c267e0 | Bin Meng | 04 June 2021, 05:51:10 UTC | riscv: ae350: dts: Remove the unnecessary space in bootargs There are two spaces before "debug' in bootargs. Drop one. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Rick Chen <rick@andestech.com> Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com> | 17 June 2021, 01:39:08 UTC |
| 2ff6b79 | Bin Meng | 04 June 2021, 05:51:09 UTC | riscv: ae350: dts: Add SPDX license header The SPDX license header is currently missing. Add one. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com> Reviewed-by: Rick Chen <rick@andestech.com> | 17 June 2021, 01:39:08 UTC |
| b2c4b7f | Tom Rini | 16 June 2021, 15:18:11 UTC | Merge tag 'u-boot-imx-20210616' of https://gitlab.denx.de/u-boot/custodians/u-boot-imx u-boot-imx-20210616 ------------------- - imxrt : fixes, USB, imxrt1020-evk - imx8m: fix for verdin-imx8mm Add conga-QMX8 board - imx6 : documentation for pico-imx6: Add SeeedStudio NPI-IMX6ULL Support ventana: DM PCI - imx7d: added SMEGW01 board CI : https://source.denx.de/u-boot/custodians/u-boot-imx/-/pipelines/7765 | 16 June 2021, 15:18:11 UTC |
| 864c3db | Mian Yousaf Kaukab | 14 April 2021, 10:33:58 UTC | ls1012a: net: pfe: remove pfe stop from bootcmd When using bootefi to boot a EFI binary, u-boot is supposed to provide networking service for EFI application. Currently, 'pfe stop' command is called from bootcmd before running bootefi. As a result network stops working for EFI applications and console is flooded with "Rx pkt not on expected port" messages. Implement board_quiesce_devices() for ls1012a boards and call pfe_command_stop() from it instead of calling 'pfe stop' from *_bootcmd and bootcmd. Tested-by: Anji Jagarlmudi <anji.jagarlmudi@nxp.com> Signed-off-by: Mian Yousaf Kaukab <ykaukab@suse.de> Reviewed-by: Ramon Fried <rfried.dev@gmail.com> [Fixed checkpatch space error] Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com> | 16 June 2021, 12:44:08 UTC |
| 2bf4658 | Michael Walle | 13 April 2021, 15:54:17 UTC | board: sl28: fix RGMII clock and voltage It was noticed that the clock isn't continuously enabled when there is no link. This is because the 125MHz clock is derived from the internal PLL which seems to go into some kind of power-down mode every once in a while. The LS1028A expects a contiuous clock. Thus enable the PLL all the time. Also, the RGMII pad voltage is wrong, it was configured to 2.5V (that is the VDDH regulator). The correct voltage is 1.8V, i.e. the VDDIO regulator. Signed-off-by: Michael Walle <michael@walle.cc> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com> | 16 June 2021, 12:44:08 UTC |
| fb4e64e | Manish Tomar | 13 April 2021, 07:08:34 UTC | configs: ls1046afrwy: Add secure boot config Add required CONFIG_NXP_ESBC for ls1046afrwy to enable ESBC Chain of Trust. Signed-off-by: Manish Tomar <manish.tomar@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com> | 16 June 2021, 12:44:08 UTC |
| 9301a5c | Tom Rini | 15 June 2021, 12:23:04 UTC | Merge https://source.denx.de/u-boot/custodians/u-boot-marvell - Turris: Fix bootcmd_rescue (Pali) | 15 June 2021, 12:23:04 UTC |
| 029bb91 | Pali Rohár | 14 June 2021, 14:45:58 UTC | arm: mvebu: turris_{omnia, mox}: ensure running bootcmd_rescue always works One of the points of putting the rescue boot command into default environment is that user can invoke it without physical access to the board (without having to press the factory reset button), by running run bootcmd_rescue in U-Boot's console. Therefore we have to ensure that bootcmd_rescue is always set to default value, regardless of whether the factory reset button was pressed. Otherwise the variable will be empty for example after upgrade from previous U-Boot. Fixes: ec3784d62646 ("arm: mvebu: turris_mox: add support for board rescue mode") Fixes: 176c3e7760a2 ("arm: mvebu: turris_omnia: support invoking rescue boot from console") Signed-off-by: Pali Rohár <pali@kernel.org> Signed-off-by: Marek Behún <marek.behun@nic.cz> Reviewed-by: Stefan Roese <sr@denx.de> | 15 June 2021, 05:21:54 UTC |
| c4737cd | Tom Rini | 11 June 2021, 12:29:34 UTC | Merge tag 'xilinx-for-v2021.07-rc5' of https://source.denx.de/u-boot/custodians/u-boot-microblaze Xilinx changes for v2021.07-rc5 zynqmp: - Fix ANALOG_BUS value after powerup - Disable EFI_CAPSULE_ON_DISK_EARLY zynqmp-gqspi: - Fix write issue | 11 June 2021, 12:29:34 UTC |
| 6bb577d | Michal Simek | 10 June 2021, 12:33:55 UTC | arm64: zynqmp: Disable EFI_CAPSULE_ON_DISK_EARLY Sata/scsi and usb based devices are not started at this stage that's why disks are not found and early update can't happen. It is because of deficiency in the UEFI implementation which is not able to deal with block devices which are added or removed after initialization. EFI capsule on disk early feature needs to be fixed first to be able to enable this feature properly. Signed-off-by: Michal Simek <michal.simek@xilinx.com> | 11 June 2021, 07:24:58 UTC |
| 2ffa653 | Ashok Reddy Soma | 25 May 2021, 12:36:27 UTC | spi: zynqmp_gqspi: Fix write issue Enable manual start in zynqmp_qspi_fill_gen_fifo(). Also enable GQSPI_IXR_GFNFULL_MASK and check for it instead of GQSPI_IXR_GFEMTY_MASK. Add dummy write to genfifo register in chipselect. Signed-off-by: Ashok Reddy Soma <ashok.reddy.soma@xilinx.com> | 11 June 2021, 07:24:58 UTC |
| 3414712 | Adrian Fiergolski | 08 June 2021, 10:37:23 UTC | arm64: zynqmp: Writing correct value to ANALOG_BUS The default register configuration after powerup for PSSYSMON_ANALOG_BUS register is incorrect. Hence, fix this in SPL by writing correct fixed value. It follows UG1085 chapter 'PS SYSMON Analog_Bus' and reflects commit sw_apps:zynq ("056ca65d44549ce27f716d423e8dfdefeee7440c") in Xilinx:embeddedsw[1]. [1] https://github.com/Xilinx/embeddedsw Signed-off-by: Adrian Fiergolski <adrian.fiergolski@fastree3d.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com> | 11 June 2021, 07:24:58 UTC |
| cf066a2 | Tom Rini | 10 June 2021, 17:27:14 UTC | Merge https://source.denx.de/u-boot/custodians/u-boot-marvell - mvebu: Turris MOX misc updates (cmds, rescue mode, LED's etc) (Marek) - mvebu: correct Armada 8K addresses (Heinrich) | 10 June 2021, 17:27:14 UTC |
| c64e2bd | Heinrich Schuchardt | 08 June 2021, 10:00:35 UTC | arm64: mvebu: correct Armada 8K addresses 0x04000000- 0x06000000 is reserved memory. We cannot load to anything here. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Reviewed-by: Stefan Roese <sr@denx.de> | 10 June 2021, 05:18:06 UTC |
| d51bdae | Marek Behún | 07 June 2021, 14:34:51 UTC | arm: mvebu: turris_mox: enable options for Turris network boot Enable configuration options to support Turris network boot. This includes FIT support and some crypto commands. Signed-off-by: Marek Behún <marek.behun@nic.cz> Reviewed-by: Pali Rohár <pali@kernel.org> Reviewed-by: Stefan Roese <sr@denx.de> | 10 June 2021, 05:18:06 UTC |
| f221333 | Marek Behún | 07 June 2021, 14:34:50 UTC | arm: mvebu: dts: turris_mox: add nodes for SPI NOR partitions Add nodes for SPI NOR partitions to the device tree of Turris MOX, as are in Linux' device tree. Signed-off-by: Marek Behún <marek.behun@nic.cz> Reviewed-by: Stefan Roese <sr@denx.de> | 10 June 2021, 05:18:06 UTC |
| 8805647 | Marek Behún | 07 June 2021, 14:34:49 UTC | arm: mvebu: configs: turris_mox: add fdtfile default env variable Add default fdtfile environment variable with value marvell/armada-3720-turris-mox.dtb. This can be useful for some boot scenarios. Signed-off-by: Marek Behún <marek.behun@nic.cz> Reviewed-by: Pali Rohár <pali@kernel.org> Reviewed-by: Stefan Roese <sr@denx.de> | 10 June 2021, 05:18:06 UTC |
| 4585341 | Marek Behún | 07 June 2021, 14:34:48 UTC | arm: mvebu: turris_mox: start blinking PHY LEDs when entering rescue Configure blinking on ethernet PHY LEDs on the MOX A board when entering rescue mode via reset button. Signed-off-by: Marek Behún <marek.behun@nic.cz> Reviewed-by: Pali Rohár <pali@kernel.org> Reviewed-by: Stefan Roese <sr@denx.de> | 10 June 2021, 05:18:06 UTC |
| ec3784d | Marek Behún | 07 June 2021, 14:34:47 UTC | arm: mvebu: turris_mox: add support for board rescue mode Add necessary config options and board code to support board factory reset / rescue mode on Turris MOX. In order to also support invoking rescue mode from U-Boot console, without having to press the factory reset button, put the rescue command into `bootcmd_rescue` default environment variable. When factory reset button is pressed, invoke rescue mode via distroboot by setting `boot_targets` to `rescue`. Rescue boot from console can be invoked by running run bootcmd_rescue Signed-off-by: Marek Behún <marek.behun@nic.cz> Reviewed-by: Pali Rohár <pali@kernel.org> Reviewed-by: Stefan Roese <sr@denx.de> | 10 June 2021, 05:18:06 UTC |
| e04bf43 | Marek Behún | 07 June 2021, 14:34:46 UTC | arm: mvebu: dts: turris_mox: add button and LED nodes Add nodes for indicator LED and reset button so that board code can implement board factory reset mechanism. Signed-off-by: Marek Behún <marek.behun@nic.cz> Reviewed-by: Pali Rohár <pali@kernel.org> Reviewed-by: Stefan Roese <sr@denx.de> | 10 June 2021, 05:18:06 UTC |
| 0008d80 | Joao Marcos Costa | 17 May 2021, 21:20:38 UTC | fs/squashfs: fix reading of fragmented files The fragmented files were not correctly read because of two issues: - The squashfs_file_info struct has a field named 'comp', which tells if the file's fragment is compressed or not. This field was always set to 'true' in sqfs_get_regfile_info and sqfs_get_lregfile_info. It should actually take sqfs_frag_lookup's return value. This patch addresses these two assignments. - In sqfs_read, the fragments (compressed or not) were copied to the output buffer through a for loop which was reading data at the wrong offset. Replace these loops by equivalent calls to memcpy, with the right parameters. I tested this patch by comparing the MD5 checksum of a few fragmented files with the respective md5sum output in sandbox, considering both compressed and uncompressed fragments. Signed-off-by: Joao Marcos Costa <jmcosta944@gmail.com> Tested-by: Richard Genoud <richard.genoud@posteo.net> Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com> | 10 June 2021, 00:58:20 UTC |
| 4670416 | Tom Rini | 09 June 2021, 12:20:36 UTC | Merge https://source.denx.de/u-boot/custodians/u-boot-usb - dwc2 and cdns3 fixes | 09 June 2021, 12:20:36 UTC |
| 5e425a3 | Tom Rini | 09 June 2021, 12:20:24 UTC | Merge tag 'efi-2021-07-rc5' of https://source.denx.de/u-boot/custodians/u-boot-efi Pull request for efi-2021-07-rc5 Documentation: * pinmux and ums man-page Bug fixes: * Consider that partition numbers as hexadecimal. * Avoid a possible NULL dereference in efi_capsule_delete_file(). | 09 June 2021, 12:20:24 UTC |
| 40496ac | Fabio Estevam | 28 May 2021, 13:26:57 UTC | mx7d: Add Storopack's SMEGW01 board Add support for Storopack's SMEGW01 board, which is an IoT gateway based on the i.MX7D SoC. Based on the original U-Boot work done by Phytec. Signed-off-by: Fabio Estevam <festevam@denx.de> | 09 June 2021, 11:34:38 UTC |
| d4f15ec | Andrey Zhizhikin | 02 May 2021, 14:32:37 UTC | imx8mn: configs: add support for distro boot commands Supported boot device types in iMX8MN: MMC, DHCP. Add DISTRO_DEFAULTS config option and include the distro boot command header file to enable full support of distro boot on i.MX8M Nano EVK (both DDR and LPDDR derivatives). Drop previous environment, which was targeting customized boot commands and boot order. Signed-off-by: Andrey Zhizhikin <andrey.zhizhikin@leica-geosystems.com> Cc: Peng Fan <peng.fan@nxp.com> Reviewed-by: Fabio Estevam <festevam@gmail.com> | 09 June 2021, 11:34:26 UTC |
| a3a0bc8 | Navin Sankar Velliangiri | 18 May 2021, 03:33:20 UTC | imx: Add SeeedStudio NPI-IMX6ULL Support CPU: Freescale i.MX6ULL rev1.1 792 MHz (running at 396 MHz) CPU: Industrial temperature grade (-40C to 105C) at 49C Reset cause: POR Model: Seeed NPi iMX6ULL Dev Board with NAND Board: Seeed NPi i.MX6ULL Dev Board DRAM: 512 MiB NAND: 512 MiB MMC: FSL_SDHC: 0 In: serial@2020000 Out: serial@2020000 Err: serial@2020000 Net: FEC0 Working: - Eth0 - MMC/SD - NAND - UART 1 - USB host Signed-off-by: Navin Sankar Velliangiri <navin@linumiz.com> Note: Changes in v2: * removed unnecessary space in imx6ull-seeed-npi-imx6ull-dev-board.dts file. * Used SZ_2M for CONFIG_SYS_MALLOC_LEN size allocation. | 09 June 2021, 11:34:18 UTC |
| fe133eb | Oliver Graute | 31 May 2021, 13:50:40 UTC | imx: support for conga-QMX8 board Add i.MX8QM qmx8 congatec board support U-Boot 2021.07-rc3-00528-gc9a966d9dd (May 31 2021 - 15:21:25 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Congatec QMX8 Qseven series Board: conga-QMX8 Build: SCFW 494c97f3, SECO-FW d63fdb21, ATF 09c5cc9 Boot: SD2 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 switch to partitions #0, OK mmc2 is current device Net: Error: ethernet@5b040000 address not set. No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com> | 09 June 2021, 11:34:09 UTC |
| 6ac4d44 | Andrey Zhizhikin | 03 May 2021, 07:59:17 UTC | arm: imx: imx8mm: correct unrecognized fracpll frequency Frequency requested by ddrphy_init_set_dfi_clk from fracpll uses MHZ() macro, which expands the value provided to the Hz range without taking into account the precise Hz setting. This causes the frequency of 266 MHz not ot be found in the imx8mm_fracpll_tbl, since it is entered there with a precise Hz value. This in turn causes the boot hang in SPL, as proper DDR fracpll frequency cannot be determined. Correct the value in imx8mm_fracpll_tbl to match the one expanded by MHZ(266) macro, rounding it down to MHz range only. Signed-off-by: Andrey Zhizhikin <andrey.zhizhikin@leica-geosystems.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: "NXP i.MX U-Boot Team" <uboot-imx@nxp.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Fixes: 825ab6b406 ("driver: ddr: Refine the ddr init driver on imx8m") Reviewed-by: Fabio Estevam <festevam@gmail.com> | 09 June 2021, 11:34:01 UTC |
| b891630 | Fabio Estevam | 27 May 2021, 21:43:06 UTC | pico-imx6: README: Fix the boot mode settings URL The original URL that explains the boot mode setting is no longer valid. Update to the new one. Signed-off-by: Fabio Estevam <festevam@gmail.com> | 09 June 2021, 11:33:45 UTC |
| cd18f1e | Tim Harvey | 03 May 2021, 18:21:27 UTC | imx: ventana: enable dm support for PCI and FEC ethernet Enable driver model support for FEC ethernet which allows us to remove the iomux and board_eth_init function. Replace the toggling of the ethernet phy reset with dt configuration. Enable driver model support for PCI which allows us to remove the eth1000_initialize() call. Additionally enable PCI_INIT_R to scan for PCI devices on init such as the e1000 that is present on the GW552x. Convert board_pci_fixup to use dm callback and remove pcidisable env variable which is not supported for DM_PCI and thus leave PCI always enabled during init. Signed-off-by: Tim Harvey <tharvey@gateworks.com> | 09 June 2021, 11:33:35 UTC |
| d9a7f1a | Andrey Zhizhikin | 03 May 2021, 08:02:10 UTC | arm: imx: imx8mm: clock: make debug output more descriptive Clock initialization functionality has ambitious debug messages, which are printed out when failures are triggered during execution: - Separate frequency table lookup functions have the the same output that makes it impossible to understand which function failed and produced the output - PLL decoding routine has a generic debug statement printed, which does not state the actual value failed to be found Extend the output for both cases with prefixing table lookup functions output with function name, and report the failed value in PLL decoding routine. Signed-off-by: Andrey Zhizhikin <andrey.zhizhikin@leica-geosystems.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: "NXP i.MX U-Boot Team" <uboot-imx@nxp.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Reviewed-by: Fabio Estevam <festevam@gmail.com> | 09 June 2021, 11:33:26 UTC |
| 1180bae | Oleh Kravchenko | 14 May 2021, 21:18:33 UTC | Add EV-iMX280-NANO-X-MB board A simple prototyping board with one microSD port, one Ethernet port, 2 USB ports, I2C, SPI, GPIO, and UART interfaces. Signed-off-by: Oleh Kravchenko <oleg@kaa.org.ua> Cc: Stefano Babic <sbabic@denx.de> | 09 June 2021, 11:32:49 UTC |
| 3675ac0 | Oleh Kravchenko | 14 May 2021, 21:18:31 UTC | Add out4.ru O4-iMX-NANO board Board designed for quick prototyping and has one microSD port, 2 Ethernet ports, 2 USB ports, I2C, SPI, CAN, RS-485, GPIO, UART interfaces, and 2 RGB LEDs. Signed-off-by: Oleh Kravchenko <oleg@kaa.org.ua> Cc: Stefano Babic <sbabic@denx.de> | 09 June 2021, 11:32:42 UTC |
| e2017ef | Marek Vasut | 17 May 2021, 22:40:30 UTC | ARM: imx8m: verdin-imx8mm: Increase bootm size to 64 MiB Uncompressed aarch64 kernel Image are rather large, increase the bootm size limit to 64 MiB to cater for that. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Marcel Ziswiler <marcel.ziswiler@toradex.com> Cc: Max Krummenacher <max.krummenacher@toradex.com> Cc: Oleksandr Suvorov <oleksandr.suvorov@toradex.com> Reviewed-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com> | 09 June 2021, 11:32:35 UTC |
| cb87278 | Giulio Benetti | 20 May 2021, 14:10:18 UTC | configs: imxrt1050-evk: enable host usb support and its command Now that usb host is supported let's enable it on this board. Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com> | 09 June 2021, 11:04:06 UTC |
| 42b9672 | Giulio Benetti | 20 May 2021, 14:10:17 UTC | ARM: dts: imxrt1050-evk: enable usbotg1 node as host Enable usbotg1 port node as host usb. Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com> | 09 June 2021, 11:04:00 UTC |
| 9b91484 | Giulio Benetti | 20 May 2021, 14:10:16 UTC | ARM: dts: imxrt1050: add usbotg1, usbphy1 and usbmisc nodes Usb is now supported so add all required nodes for it in imxrt1050. Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com> | 09 June 2021, 11:03:54 UTC |
| e7e81e8 | Giulio Benetti | 20 May 2021, 14:10:15 UTC | usb: ehci-mx6: add support for i.MXRT Add support for usb1 and usb2 present on i.IMXRT. Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com> | 09 June 2021, 11:03:47 UTC |
| 45a5f76 | Giulio Benetti | 20 May 2021, 14:10:14 UTC | clk: imx: clk-imxrt1050: introduce IMXRT1050_CLK_USBOH3 Usb needs IMXRT1050_CLK_USBOH3 clock to be enabled, so let's add it to clock driver. Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com> | 09 June 2021, 11:03:41 UTC |
| 0d90dec | Giulio Benetti | 20 May 2021, 14:10:13 UTC | ARM: IMXRT: introduce is_imxrt*() macros and get_cpu_rev() We need those macros to instruct drivers on how to behave for SoC specific quirks, so let's add it as done for other i.MX SoCs. Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com> | 09 June 2021, 11:03:33 UTC |
| d7308db | Giulio Benetti | 16 May 2021, 21:57:02 UTC | ARM: dts: imxrt1020: add gpio5 node to this SoC i.MXRT1020 supports gpio5, so let's add a node for it. Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com> | 09 June 2021, 11:03:26 UTC |
| dc54f82 | Giulio Benetti | 16 May 2021, 21:57:01 UTC | ARM: dts: imxrt1020-evk: move all u-boot, dm-spl to imxrt1020-evk-u-boot.dtsi file At the moment a lot of u-boot,dm-spl properties are present in board .dts file but this is not correct since u-boot,dm-spl property is u-boot specific and must be listed into the separate imrt1020-evk-u-boot.dtsi file. So let's move every u-boot,dm-spl property present in imxrt1020-evk.dts to imxrt1020-evk-u-boot.dtsi file. Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com> | 09 June 2021, 11:03:19 UTC |
| 1f3555d | Giulio Benetti | 16 May 2021, 21:57:00 UTC | ARM: dts: imxrt1050-evk: move all u-boot, dm-spl to imxrt1050-evk-u-boot.dtsi file At the moment a lot of u-boot,dm-spl properties are present in board .dts file but this is not correct since u-boot,dm-spl property is u-boot specific and must be listed into the separate imrt1050-evk-u-boot.dtsi file. So let's move every u-boot,dm-spl property present in imxrt1050-evk.dts to imxrt1050-evk-u-boot.dtsi file. Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com> | 09 June 2021, 11:03:08 UTC |
| 31f0e58 | Giulio Benetti | 13 May 2021, 10:19:36 UTC | ARM: dts: imxrt1050-evk: remove u-boot,dm-spl We don't need lcdif to be enable in SPL, so let's remove u-boot,dm-spl. Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com> | 09 June 2021, 11:01:33 UTC |
| a9a5c33 | Giulio Benetti | 13 May 2021, 10:19:35 UTC | ARM: dts: imxrt1050: set lcdif clocks according to mxsfb driver Lcdif needs both "pix" and "axi" clocks to be enabled so let's add them to lcdif node. Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com> | 09 June 2021, 11:01:33 UTC |
