| 5b2bbf7 | Johannes Berg | 08 November 2011, 12:04:41 UTC | mac80211: fix bug in ieee80211_build_probe_req ieee80211_probereq_get() can return NULL in which case we should clean up & return NULL in ieee80211_build_probe_req() as well. Cc: stable@vger.kernel.org Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com> | 09 November 2011, 19:35:55 UTC |
| f8d1ccf | Johannes Berg | 08 November 2011, 11:28:33 UTC | mac80211: fix NULL dereference in radiotap code When receiving failed PLCP frames is enabled, there won't be a rate pointer when we add the radiotap header and thus the kernel will crash. Fix this by not assuming the rate pointer is always valid. It's still always valid for frames that have good PLCP though, and that is checked & enforced. This was broken by my commit fc88518916793af8ad6a02e05ff254d95c36d875 Author: Johannes Berg <johannes.berg@intel.com> Date: Fri Jul 30 13:23:12 2010 +0200 mac80211: don't check rates on PLCP error frames where I removed the check in this case but didn't take into account that the rate info would be used. Reported-by: Xiaokang Qin <xiaokang.qin@intel.com> Cc: stable@vger.kernel.org Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com> | 09 November 2011, 19:35:55 UTC |
| cc438fc | Eyal Shapira | 08 November 2011, 13:54:46 UTC | wl12xx: fix wl12xx_scan_sched_scan_ssid_list() check that all given ssids are in filters A minor fix for the check that verifies that all given SSIDs (in req) exist in the filters (the match sets) Signed-off-by: Eyal Shapira <eyal@wizery.com> Acked-by: Luciano Coelho <coelho@ti.com> Signed-off-by: John W. Linville <linville@tuxdriver.com> | 08 November 2011, 20:02:45 UTC |
| a59be08 | Helmut Schaa | 08 November 2011, 13:01:13 UTC | ath: Fix NULL ptr dereference in ath_reg_apply_world_flags This happens with devices using a regulatory domain 0x68 that are only 5Ghz capable because ath_reg_apply_active_scan_flags assumes that we always have a 2,4Ghz band. CPU 0 Unable to handle kernel paging request at virtual address 00000000, epc == 82cd838c, ra == 82cd8384 Oops[#1]: Cpu 0 $ 0 : 00000000 00000061 00000003 00000024 $ 4 : 00000003 000016c1 82f900ac 00000024 $ 8 : 00000000 82cda304 0058bad8 00000005 $12 : 005908f8 001e8481 00000003 1dcd6500 $16 : 00000002 00000000 82c700c0 82c700c0 $20 : 82d415e4 82c70d64 82c70200 82c715bc $24 : 00000000 11e1a300 $28 : 82ce2000 82ce3c70 82c715a8 82cd8384 Hi : 00000000 Lo : 0000001e epc : 82cd838c ath_reg_apply_world_flags+0x78/0x17c [ath] Not tainted ra : 82cd8384 ath_reg_apply_world_flags+0x70/0x17c [ath] Status: 1000d403 KERNEL EXL IE Cause : 80800008 BadVA : 00000000 PrId : 00019374 (MIPS 24Kc) Modules linked in: ath9k(+) ath9k_common ath9k_hw ath mac80211 cfg80211 compat_firmware_class compat arc4 aes_generic deflate ecb cbc leds_gpio button_hotplug gpio_buttons input_polldev ie Process insmod (pid: 464, threadinfo=82ce2000, task=838b31d8, tls=00000000) Stack : 00000000 00000002 82f900ac 82c700c0 82d415e4 82c70d64 00000000 00000068 82f900ac 82cd88f4 82c700c0 82cda304 00000001 000020f0 82f90000 82c70d40 00000002 82f90000 82f900ac 82d4207c 82d518a0 00000002 7fee6118 8017c0d8 00000008 8397ba00 82c70d40 00000000 82c70200 83813000 83813058 b0010000 82d518a0 00000002 7fee6118 82d4b8c8 83445cc0 80120dc0 83804000 800eeda0 ... Call Trace: [<82cd838c>] ath_reg_apply_world_flags+0x78/0x17c [ath] [<82cd88f4>] ath_regd_init+0x464/0x488 [ath] [<82d4207c>] ath9k_init_device+0x6a4/0x6b4 [ath9k] [<82d4b8c8>] ath_pci_probe+0x27c/0x358 [ath9k] [<80181de0>] pci_device_probe+0x64/0xa4 [<8019e874>] driver_probe_device+0xb8/0x190 [<8019e9b8>] __driver_attach+0x6c/0xa4 [<8019dfc0>] bus_for_each_dev+0x60/0xb0 [<8019d744>] bus_add_driver+0xc4/0x25c [<8019ed6c>] driver_register+0xe0/0x198 [<8018206c>] __pci_register_driver+0x50/0xe0 [<82dd0010>] ath9k_init+0x10/0x54 [ath9k] [<8006b4a0>] do_one_initcall+0x68/0x1ec [<800a901c>] sys_init_module+0xec/0x23c [<80062544>] stack_done+0x20/0x3c Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com> | 08 November 2011, 20:02:45 UTC |
| c26887d | Johannes Berg | 08 November 2011, 08:20:07 UTC | cfg80211: fix missing kernel-doc Two new struct members were not documented, fix that. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com> | 08 November 2011, 20:02:44 UTC |
| 9270fd6 | John W. Linville | 08 November 2011, 19:59:14 UTC | Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/padovan/bluetooth | 08 November 2011, 19:59:14 UTC |
| d13431c | Wen-chien Jesse Sung | 08 November 2011, 06:30:22 UTC | Bluetooth: Add support for Broadcom BCM20702A0 Since this device declares itself as vendor specific, must add a new entry to device ID table to support it. usb-device output of this device: T: Bus=01 Lev=02 Prnt=02 Port=03 Cnt=01 Dev#= 3 Spd=12 MxCh= 0 D: Ver= 2.00 Cls=ff(vend.) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=413c ProdID=8197 Rev=01.12 S: Manufacturer=Broadcom Corp S: Product=BCM20702A0 S: SerialNumber=D0DF9AA9C9F1 C: #Ifs= 4 Cfg#= 1 Atr=e0 MxPwr=0mA I: If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=01 Prot=01 Driver=(none) I: If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=01 Driver=(none) I: If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) I: If#= 3 Alt= 0 #EPs= 0 Cls=fe(app. ) Sub=01 Prot=01 Driver=(none) Signed-off-by: Wen-chien Jesse Sung <jesse.sung@canonical.com> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi> | 08 November 2011, 15:15:43 UTC |
| f3f668b | Andrzej Kaczmarek | 07 November 2011, 19:19:04 UTC | Bluetooth: Use miliseconds for L2CAP channel timeouts Timers set by __set_chan_timer() should use miliseconds instead of jiffies. Commit 942ecc9c4643db5ce071562e0a23f99464d6b461 updated l2cap_set_timer() so it expects timeout to be specified in msecs instead of jiffies. This makes timeouts unreliable when CONFIG_HZ is not set to 1000. Signed-off-by: Andrzej Kaczmarek <andrzej.kaczmarek@tieto.com> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi> | 07 November 2011, 19:19:04 UTC |
| 4dff523 | Arek Lichwa | 26 October 2011, 09:23:22 UTC | Bluetooth: Revert: Fix L2CAP connection establishment This reverts commit 330605423ca6eafafb8dcc27502bce1c585d1b06. The commit introduces regression when two 2.1 devices attempt establish rfcomm channel. Such connection is refused since there's a security block issue on l2cap. It means the link is unencrypted. 2011-09-16 18:08:46.567616 < ACL data: handle 1 flags 0x00 dlen 24 0000: 14 00 40 00 06 00 02 00 0f 35 03 19 12 00 ff ff ..@......5....˙˙ 0010: 35 05 0a 00 00 ff ff 00 5....˙˙. 2011-09-16 18:08:46.572377 > HCI Event: Number of Completed Packets (0x13) plen 5 handle 1 packets 1 2011-09-16 18:08:46.577931 > ACL data: handle 1 flags 0x02 dlen 88 L2CAP(d): cid 0x0040 len 84 [psm 0] 0000: 07 00 02 00 4f 00 4c 35 4a 35 48 09 00 00 0a 00 ....O.L5J5H..... 0010: 01 00 00 09 00 01 35 03 19 12 00 09 00 05 35 03 ......5.......5. 0020: 19 10 02 09 00 09 35 08 35 06 19 12 00 09 01 02 ......5.5....... 0030: 09 02 00 09 01 02 09 02 01 09 00 0a 09 02 02 09 ................ 0040: 00 00 09 02 03 09 00 00 09 02 04 28 01 09 02 05 ...........(.... 0050: 09 00 02 00 .... 2011-09-16 18:08:46.626057 < HCI Command: Authentication Requested (0x01|0x0011) plen 2 handle 1 2011-09-16 18:08:46.627614 > HCI Event: Command Status (0x0f) plen 4 Authentication Requested (0x01|0x0011) status 0x00 ncmd 1 2011-09-16 18:08:46.627675 > HCI Event: Link Key Request (0x17) plen 6 bdaddr 00:00:F2:6A:29:69 2011-09-16 18:08:46.634999 < HCI Command: Link Key Request Reply (0x01|0x000b) plen 22 bdaddr 00:00:F2:6A:29:69 key 58CD393179FC902E5E8F512A855EE532 2011-09-16 18:08:46.683278 > HCI Event: Command Complete (0x0e) plen 10 Link Key Request Reply (0x01|0x000b) ncmd 1 status 0x00 bdaddr 00:00:F2:6A:29:69 2011-09-16 18:08:46.764729 > HCI Event: Auth Complete (0x06) plen 3 status 0x00 handle 1 2011-09-16 18:08:46.764821 < ACL data: handle 1 flags 0x00 dlen 12 0000: 08 00 01 00 02 05 04 00 03 00 41 00 ..........A. 2011-09-16 18:08:46.764851 > HCI Event: Command Status (0x0f) plen 4 Unknown (0x00|0x0000) status 0x00 ncmd 2 2011-09-16 18:08:46.768117 > HCI Event: Number of Completed Packets (0x13) plen 5 handle 1 packets 1 2011-09-16 18:08:46.770894 > ACL data: handle 1 flags 0x02 dlen 16 L2CAP(s): Connect rsp: dcid 0x0000 scid 0x0041 result 3 status 0 Connection refused - security block 2011-09-16 18:08:49.000691 < ACL data: handle 1 flags 0x00 dlen 12 0000: 08 00 01 00 06 06 04 00 40 00 40 00 ........@.@. 2011-09-16 18:08:49.015675 > HCI Event: Number of Completed Packets (0x13) plen 5 handle 1 packets 1 2011-09-16 18:08:49.016927 > ACL data: handle 1 flags 0x02 dlen 12 L2CAP(s): Disconn rsp: dcid 0x0040 scid 0x0040 2011-09-16 18:08:51.009480 < HCI Command: Disconnect (0x01|0x0006) plen 3 handle 1 reason 0x13 Reason: Remote User Terminated Connection 2011-09-16 18:08:51.011525 > HCI Event: Command Status (0x0f) plen 4 Disconnect (0x01|0x0006) status 0x00 ncmd 1 2011-09-16 18:08:51.123494 > HCI Event: Disconn Complete (0x05) plen 4 status 0x00 handle 1 reason 0x16 Reason: Connection Terminated by Local Host Signed-off-by: Arek Lichwa <arkadiusz.lichwa@tieto.com> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi> | 07 November 2011, 18:46:05 UTC |
| 24b9c37 | Janusz.Dziedzic@tieto.com | 07 November 2011, 07:47:47 UTC | mac80211: uAPSD - fix IEEE80211_FCTL_MOREDATA bit setting Set IEEE80211_FCTL_MOREDATA bit also in case we have buffered frames (more than one) only for one AC. Signed-off-by: Janusz Dziedzic <janusz.dziedzic@tieto.com> Reviewed-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com> | 07 November 2011, 18:19:15 UTC |
| db652e4 | Jesper Juhl | 06 November 2011, 21:58:31 UTC | net, wireless, mwifiex: Fix mem leak in mwifiex_update_curr_bss_params() If kmemdup() fails we leak the memory allocated to bss_desc. This patch fixes the leak. I also removed the pointless default assignment of 'NULL' to 'bss_desc' while I was there anyway. Signed-off-by: Jesper Juhl <jj@chaosbits.net> Reviewed-by: Srivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com> | 07 November 2011, 18:19:15 UTC |
| 3b6ef63 | Johannes Berg | 04 November 2011, 10:01:46 UTC | cfg80211: fix cmp_ies When comparing two items by IE, the sort order wasn't stable, which could lead to issues in the rbtree. Make it stable by making a missing IE sort before a present IE. Also sort by length first if it differs and then by contents. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com> | 07 November 2011, 18:19:14 UTC |
| 133a3ff | Johannes Berg | 03 November 2011, 13:50:13 UTC | cfg80211: allow setting TXQ parameters only in AP mode In other modes the parameters should not be set. Right now, mac80211 will set them, even if the user asked for setting them on VLANs which the driver doesn't know about, causing all kinds of trouble. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com> | 07 November 2011, 18:19:14 UTC |
| 6c73941 | Johannes Berg | 03 November 2011, 08:27:01 UTC | nl80211: fix HT capability attribute validation Since the NL80211_ATTR_HT_CAPABILITY attribute is used as a struct, it needs a minimum, not maximum length. Enforce that properly. Not doing so could potentially lead to reading after the buffer. Cc: stable@vger.kernel.org Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com> | 07 November 2011, 18:19:13 UTC |
| 3432f92 | Eliad Peller | 30 October 2011, 13:41:59 UTC | mac80211: use min rate as basic rate for buggy APs Some buggy APs (and even P2P_GO) don't advertise their basic rates in the association response. In such case, use the min supported rate as the basic rate. Reported-by: Pontus Fuchs <pontus.fuchs@gmail.com> Signed-off-by: Eliad Peller <eliad@wizery.com> Signed-off-by: John W. Linville <linville@tuxdriver.com> | 07 November 2011, 18:19:13 UTC |
| ae8e467 | Arend van Spriel | 29 October 2011, 09:30:15 UTC | brcm80211: smac: eliminate a null pointer dereference in dma.c Though it's unlikely, di may be null, so we can't dereference di->dma.dmactrlflags until we've checked it. Move this de-reference after the check, and adjust the error message to not require de-referencing di. This is based upon Julia's original patch: <1319846297-2985-2-git-send-email-julia@diku.dk> Reported-by: Julia Lawall <julia@diku.dk> Acked-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: Julian Calaby <julian.calaby@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com> | 07 November 2011, 18:19:13 UTC |
| 73d51f3 | Rafał Miłecki | 17 October 2011, 15:15:44 UTC | b43: HT-PHY: report signal to mac80211 Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com> | 07 November 2011, 18:19:12 UTC |
| 694718d | Rafał Miłecki | 17 October 2011, 14:59:25 UTC | b43: fill ctl1 word on all newer PHYs, fix PHY errors This fixes PHY transmission errors reported on some LP-PHY and HT-PHY cards. For LP-PHY they were quite rare and not really noticable. On HT-PHY they were critical, OFDM rates were not available at all. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com> | 07 November 2011, 18:19:12 UTC |
| 54d5026 | Johannes Berg | 04 November 2011, 17:07:43 UTC | mac80211: warn only once about not finding a rate The warning really shouldn't happen, but until we find the reason why it does don't spew it all the time, just once is enough to know we've hit it. Reported-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com> | 04 November 2011, 17:38:06 UTC |
| f956c34 | Wey-Yi Guy | 30 October 2011, 06:15:15 UTC | iwlwifi: don't perform "echo test" when cmd queue stuck Perform "echo test" when cmd queue stuck detected, somethime it will cause calltrace. I am not sure how to fix it yet, just remove the action now until find a better way to handle it. Reported-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com> | 02 November 2011, 19:23:13 UTC |
| addc985 | Larry Finger | 28 October 2011, 17:17:49 UTC | b43: Remove unneeded message The driver can spam the logs with "RX: Packet dropped" messages. These drops originate from 1. a correpted PLCP, 2. decryption errors, and 3. packet size underruns. Condition #3 logs a separate message, thus no dropped message is needed. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com> | 02 November 2011, 19:23:13 UTC |
| 05cb910 | Johannes Berg | 28 October 2011, 09:59:47 UTC | mac80211: disable powersave for broken APs Only AID values 1-2007 are valid, but some APs have been found to send random bogus values, in the reported case an AP that was sending the AID field value 0xffff, an AID of 0x3fff (16383). There isn't much we can do but disable powersave since there's no way it can work properly in this case. Cc: stable@vger.kernel.org Reported-by: Bill C Riemers <briemers@redhat.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com> | 02 November 2011, 19:23:13 UTC |
| 8a39ef8 | Wey-Yi Guy | 28 October 2011, 00:19:39 UTC | iwlwifi: allow pci_enable_msi fail Continue the init process even fail to enable msi out_iounmap is no longer used, remove it Reported-by: werner <w.landgraf@ru.ru> Tested-by: werner <w.landgraf@ru.ru> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com> | 02 November 2011, 19:23:13 UTC |
| 3209e06 | Andres Salomon | 26 October 2011, 17:19:26 UTC | libertas: ensure we clean up a scan request properly Commit 2e30168b ("libertas: terminate scan when stopping interface") adds cleanup code to lbs_eth_stop to call cfg80211_scan_done if there's an outstanding cfg80211_scan_request. However, it assumes that the scan request was allocated via the cfg80211 stack. Libertas has its own internal allocation method, kept track of with priv->internal_scan. This doesn't set scan_req->wiphy, amongst other things, which results in hitting a BUG() when we call cfg80211_scan_done on the request. This provides a function to take care of the low-level scan_req cleanup details. We simply call that to deal with finishing up scan requests. The bug we were hitting was: [ 964.321495] kernel BUG at net/wireless/core.h:87! [ 964.329970] Unable to handle kernel NULL pointer dereference at virtual address 00000000 [ 964.341963] pgd = dcf80000 ... [ 964.849998] 9fe0: 00000000 beb417b8 4018e280 401e822c 60000010 00000004 00000000 00000000 [ 964.865007] [<c003104c>] (__bug+0x1c/0x28) from [<c0384ffc>] (cfg80211_scan_done+0x54/0x6c) [ 964.895324] [<c0384ffc>] (cfg80211_scan_done+0x54/0x6c) from [<bf028bac>] (lbs_eth_stop+0x10c/0x188 [libertas]) [ 964.895324] [<bf028bac>] (lbs_eth_stop+0x10c/0x188 [libertas]) from [<c03002a0>] (__dev_close_many+0x94/0xc4) [ 964.918995] [<c03002a0>] (__dev_close_many+0x94/0xc4) from [<c030037c>] (dev_close_many+0x78/0xe0) Signed-off-by: Andres Salomon <dilinger@queued.net> Acked-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com> | 02 November 2011, 19:23:12 UTC |
| 9334892 | Rajkumar Manoharan | 25 October 2011, 11:17:36 UTC | ath9k_hw: Fix noise floor calibration timeout on fast channel change During the fast channel change noise floor values are being loaded twice at init_cal and after channel_change. The commit "ath9k_hw: Improve fast channel change for AR9003 chips" overlooked it that caused failure to load nf while doing bgscan. This patch performs noise floor calibration after the fast and full reset. Signed-off-by: Rajkumar Manoharan <rmanohar@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com> | 02 November 2011, 19:23:12 UTC |
| 98fb2cc | Rajkumar Manoharan | 24 October 2011, 12:43:40 UTC | ath9k_hw: Update AR9485 initvals to fix system hang issue This patch fixes system hang when resuming from S3 state and lower rate sens failure issue. Cc: stable@kernel.org Signed-off-by: Rajkumar Manoharan <rmanohar@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com> | 02 November 2011, 19:23:12 UTC |
| e3a4cc2 | Jouni Malinen | 23 October 2011, 19:36:04 UTC | mac80211: Fix TDLS support validation in add_station handler We need to verify whether the command is successful before allocating the station entry to avoid extra processing. This also fixes a memory leak on the error path. Signed-off-by: Jouni Malinen <j@w1.fi> Signed-off-by: John W. Linville <linville@tuxdriver.com> | 02 November 2011, 19:23:12 UTC |
| 94d55d6 | Christian Lamparter | 21 October 2011, 16:38:56 UTC | carl9170: fix AMPDU TX_CTL_REQ_TX_STATUS handling Previously the driver did not care if TX_CTL_REQ_TX_STATUS was set on aggregated frames or not and it would silently drop successfully sent frames if possible [much like: "no news is good news!"]. But, TX_CTL_REQ_TX_STATUS was invented for a reason and no tx status report should ever be dropped if it is set. Reported-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Christian Lamparter <chunkeey@googlemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com> | 02 November 2011, 19:23:12 UTC |
| fd26981 | Rajkumar Manoharan | 21 October 2011, 07:23:51 UTC | ath9k_hw: Fix regression of register offset of AR9330/AR9340 The commit ce407afc10 introduced regression for AR9330/AR9340 register offsets. Some of the register offsets are common for AR9330/AR9340/AR9485 except AR9380. Fix that. Cc: stable@kernel.org [3.1.0+] Cc: Senthil Balasubramanian <senthilb@qca.qualcomm.com> Signed-off-by: Rajkumar Manoharan <rmanohar@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com> | 02 November 2011, 19:23:11 UTC |
| 6911bf0 | Eliad Peller | 20 October 2011, 17:05:50 UTC | mac80211: config hw when going back on-channel When going back on-channel, we should reconfigure the hw iff the hardware is not already configured to the operational channel. Signed-off-by: Eliad Peller <eliad@wizery.com> Cc: stable@kernel.org # 2.6.39+ Signed-off-by: John W. Linville <linville@tuxdriver.com> | 02 November 2011, 19:23:11 UTC |
| eaa7af2 | Eliad Peller | 20 October 2011, 17:05:49 UTC | mac80211: fix remain_off_channel regression The offchannel code is currently broken - we should remain_off_channel if the work was started, and the work's channel and channel_type are the same as local->tmp_channel and local->tmp_channel_type. However, if wk->chan_type and local->tmp_channel_type coexist (e.g. have the same channel type), we won't remain_off_channel. This behavior was introduced by commit da2fd1f ("mac80211: Allow work items to use existing channel type.") Tested-by: Ben Greear <greearb@candelatech.com> Signed-off-by: Eliad Peller <eliad@wizery.com> Cc: stable@kernel.org # 2.6.39+ Signed-off-by: John W. Linville <linville@tuxdriver.com> | 02 November 2011, 19:23:11 UTC |
| 91ae4d0 | Rajkumar Manoharan | 20 October 2011, 08:59:38 UTC | ath9k_hw: Fix radio retention for AR9462 IQ calibration during fast channel change sometimes failed with RTT. And also restoring invalid radio retention readings during init cal could cause failure to set the channel properly. This patch counts the valid rtt history readings and clears rtt mask. Signed-off-by: Rajkumar Manoharan <rmanohar@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com> | 02 November 2011, 19:23:11 UTC |
| 52d6d4e | Rajkumar Manoharan | 20 October 2011, 08:52:43 UTC | ath9k_hw: Fix regression of register offset for AR9003 chips My recent commits (3782c69d, 324c74a) introduced regression for register offset selection that based on the macversion. Not using parentheses in proper manner for ternary operator leads to select wrong offset for the registers. This issue was observed with AR9462 chip that immediate disconnect after the association with the following message ieee80211 phy3: wlan0: Failed to send nullfunc to AP 00:23:69:12:ea:47 after 500ms, disconnecting. Cc: stable@kernel.org Signed-off-by: Rajkumar Manoharan <rmanohar@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com> | 02 November 2011, 19:23:11 UTC |
| cda4ee3 | Emmanuel Grumbach | 14 October 2011, 19:54:47 UTC | iwlagn: fix the race in the unmapping of the HCMD As Stanislaw pointed out, my patch iwlagn: fix a race in the unmapping of the TFDs solved only part of the problem. The race still exists for TFDs of the host commands. Fix that too. Reported-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com> | 02 November 2011, 19:23:10 UTC |
| c125d5e | John W. Linville | 02 November 2011, 19:15:51 UTC | Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/padovan/bluetooth | 02 November 2011, 19:15:51 UTC |
| 6b441fa | David Herrmann | 26 October 2011, 09:22:46 UTC | Bluetooth: bfusb: Fix error path on firmware load When loading the usb-configuration we do not signal the end of configuration on memory allocation error. This patch moves the memory allocation to the top so every error path uses "goto error" now to correctly send the usb-ctrl message when detecting some error. This also replaces GFP_ATOMIC with GFP_KERNEL as we are allowed to sleep here. Signed-off-by: David Herrmann <dh.herrmann@googlemail.com> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi> | 31 October 2011, 19:52:35 UTC |
| b91a4e3 | David Herrmann | 25 October 2011, 19:13:36 UTC | Bluetooth: bcm203x: Use GFP_KERNEL in workqueue A workqueue is allowed to sleep so we can safely use GFP_KERNEL instead of GFP_ATOMIC. This is still legacy code when the driver used timer BHs and not a worqueue. Signed-off-by: David Herrmann <dh.herrmann@googlemail.com> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi> | 31 October 2011, 19:51:57 UTC |
| fc501ad | David Herrmann | 26 October 2011, 09:13:13 UTC | Bluetooth: bcm203x: Fix race condition on disconnect When disconnecting a bcm203x device we kill and destroy the usb-urb, however, there might still be a pending work-structure which resubmits the now invalid urb. To avoid this race condition, we simply set a shutdown-flag and synchronously kill the worker first. This also adds a comment to all schedule_work()s, as it is really not clear that they are used as replacement for short timers (which can be seen in the git history). Signed-off-by: David Herrmann <dh.herrmann@googlemail.com> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi> | 31 October 2011, 19:51:37 UTC |
| 0ba22bb | David Herrmann | 25 October 2011, 10:09:52 UTC | Bluetooth: ath3k: Use GFP_KERNEL instead of GFP_ATOMIC We are allowed to sleep here so no need to use GFP_ATOMIC. The caller (ath3k_probe) calls request_firmware() which definitely sleeps. Hence, we should avoid using GFP_ATOMIC. Signed-off-by: David Herrmann <dh.herrmann@googlemail.com> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi> | 31 October 2011, 19:47:19 UTC |
| dafbde3 | Johan Hedberg | 24 October 2011, 20:36:26 UTC | Bluetooth: Set HCI_MGMT flag only in read_controller_info The HCI_MGMT flag should only be set when user space requests the full controller information. This way we avoid potential issues with setting change events ariving before the actual read_controller_info command finishes. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi> | 31 October 2011, 19:31:02 UTC |
| e1b6eb3 | Szymon Janc | 17 October 2011, 21:05:49 UTC | Bluetooth: Increase HCI reset timeout in hci_dev_do_close I've noticed that my CSR usb dongle was not working if it was plugged in when PC was booting. It looks like I get two HCI reset command complete events (see hcidump logs below). The root cause is reset called from off_timer. Timeout for this reset to complete is set to 250ms and my bt dongle requires more time for replying with command complete event. After that, chip seems to reply with reset command complete event for next non-reset command. Attached patch increase mentioned timeout to HCI_INIT_TIMEOUT, this value is already used for timeouting hci_reset_req in hci_dev_reset(). This might also be related to BT not working after suspend that was reported here some time ago. Hcidump log: 2011-09-12 23:13:27.379465 < HCI Command: Reset (0x03|0x0003) plen 0 2011-09-12 23:13:27.380797 > HCI Event: Command Complete (0x0e) plen 4 Reset (0x03|0x0003) ncmd 1 status 0x00 2011-09-12 23:13:27.380859 < HCI Command: Read Local Supported Features (0x04|0x000 3) plen 0 2011-09-12 23:13:27.760789 > HCI Event: Command Complete (0x0e) plen 4 Reset (0x03|0x0003) ncmd 1 status 0x00 2011-09-12 23:13:27.760831 < HCI Command: Read Local Version Information (0x04|0x00 01) plen 0 2011-09-12 23:13:27.764780 > HCI Event: Command Complete (0x0e) plen 12 Read Local Version Information (0x04|0x0001) ncmd 1 status 0x00 HCI Version: 1.1 (0x1) HCI Revision: 0x36f LMP Version: 1.1 (0x1) LMP Subversion: 0x36f Manufacturer: Cambridge Silicon Radio (10) Signed-off-by: Szymon Janc <szymon@janc.net.pl> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi> | 31 October 2011, 19:10:18 UTC |
| 6a32e4f | Eric Dumazet | 29 October 2011, 06:13:39 UTC | vlan: allow nested vlan_do_receive() commit 2425717b27eb (net: allow vlan traffic to be received under bond) broke ARP processing on vlan on top of bonding. +-------+ eth0 --| bond0 |---bond0.103 eth1 --| | +-------+ 52870.115435: skb_gro_reset_offset <-napi_gro_receive 52870.115435: dev_gro_receive <-napi_gro_receive 52870.115435: napi_skb_finish <-napi_gro_receive 52870.115435: netif_receive_skb <-napi_skb_finish 52870.115435: get_rps_cpu <-netif_receive_skb 52870.115435: __netif_receive_skb <-netif_receive_skb 52870.115436: vlan_do_receive <-__netif_receive_skb 52870.115436: bond_handle_frame <-__netif_receive_skb 52870.115436: vlan_do_receive <-__netif_receive_skb 52870.115436: arp_rcv <-__netif_receive_skb 52870.115436: kfree_skb <-arp_rcv Packet is dropped in arp_rcv() because its pkt_type was set to PACKET_OTHERHOST in the first vlan_do_receive() call, since no eth0.103 exists. We really need to change pkt_type only if no more rx_handler is about to be called for the packet. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Reviewed-by: Jiri Pirko <jpirko@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 30 October 2011, 08:43:30 UTC |
| 14ef37b | Andreas Hofmeister | 26 October 2011, 03:24:29 UTC | ipv6: fix route lookup in addrconf_prefix_rcv() The route lookup to find a previously auto-configured route for a prefixes used to use rt6_lookup(), with the prefix from the RA used as an address. However, that kind of lookup ignores routing tables, the prefix length and route flags, so when there were other matching routes, even in different tables and/or with a different prefix length, the wrong route would be manipulated. Now, a new function "addrconf_get_prefix_route()" is used for the route lookup, which searches in RT6_TABLE_PREFIX and takes the prefix-length and route flags into account. Signed-off-by: Andreas Hofmeister <andi@collax.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 30 October 2011, 08:12:36 UTC |
| e6d265e | Jay Vosburgh | 28 October 2011, 15:42:50 UTC | bonding: eliminate bond_close race conditions This patch resolves two sets of race conditions. Mitsuo Hayasaka <mitsuo.hayasaka.hu@hitachi.com> reported the first, as follows: The bond_close() calls cancel_delayed_work() to cancel delayed works. It, however, cannot cancel works that were already queued in workqueue. The bond_open() initializes work->data, and proccess_one_work() refers get_work_cwq(work)->wq->flags. The get_work_cwq() returns NULL when work->data has been initialized. Thus, a panic occurs. He included a patch that converted the cancel_delayed_work calls in bond_close to flush_delayed_work_sync, which eliminated the above problem. His patch is incorporated, at least in principle, into this patch. In this patch, we use cancel_delayed_work_sync in place of flush_delayed_work_sync, and also convert bond_uninit in addition to bond_close. This conversion to _sync, however, opens new races between bond_close and three periodically executing workqueue functions: bond_mii_monitor, bond_alb_monitor and bond_activebackup_arp_mon. The race occurs because bond_close and bond_uninit are always called with RTNL held, and these workqueue functions may acquire RTNL to perform failover-related activities. If bond_close or bond_uninit is waiting in cancel_delayed_work_sync, deadlock occurs. These deadlocks are resolved by having the workqueue functions acquire RTNL conditionally. If the rtnl_trylock() fails, the functions reschedule and return immediately. For the cases that are attempting to perform link failover, a delay of 1 is used; for the other cases, the normal interval is used (as those activities are not as time critical). Additionally, the bond_mii_monitor function now stores the delay in a variable (mimicing the structure of activebackup_arp_mon). Lastly, all of the above renders the kill_timers sentinel moot, and therefore it has been removed. Tested-by: Mitsuo Hayasaka <mitsuo.hayasaka.hu@hitachi.com> Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 30 October 2011, 07:13:14 UTC |
| 10ee0fa | Sucheta Chakraborty | 28 October 2011, 12:57:15 UTC | qlcnic: fix beacon and LED test. o Updated version number to 5.0.25 o Do not hold onto RESETTING_BIT for entire duration of LED/ beacon test. Instead, just checking for RESETTING_BIT not set before sending config_led command down to card. o Take rtnl_lock instead of RESETTING_BIT for beacon test while sending config_led command down to make sure interface cannot be brought up/ down. o Allocate and free resources if interface is down before sending the config_led command. This is to make sure config_led command sending doesn't fail. o Clear QLCNIC_LED_ENABLE bit if beacon/ LED test fails to start. Signed-off-by: Sucheta Chakraborty <sucheta.chakraborty@qlogic.com> Signed-off-by: Anirban Chakraborty <anirban.chakraborty@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 30 October 2011, 07:09:41 UTC |
| 445b62d | Sritej Velaga | 28 October 2011, 12:57:14 UTC | qlcnic: Updated License file Updated qlcnic's license file. Signed-off-by: Sritej Velaga <sritej.velaga@qlogic.com> Signed-off-by: Anirban Chakraborty <anirban.chakraborty@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 30 October 2011, 07:09:40 UTC |
| 68233c5 | Sony Chacko | 28 October 2011, 12:57:13 UTC | qlcnic: updated reset sequence Signed-off-by: Sony Chacko <sony.chacko@qlogic.com> Signed-off-by: Anirban Chakraborty <anirban.chakraborty@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 30 October 2011, 07:09:40 UTC |
| ad567b8 | Sucheta Chakraborty | 28 October 2011, 12:57:12 UTC | qlcnic: reset loopback mode if promiscous mode setting fails. If promiscous mode setting fails, reset loopback mode setting in firmware. Signed-off-by: Sucheta Chakraborty <sucheta.chakraborty@qlogic.com> Signed-off-by: Anirban Chakraborty <anirban.chakraborty@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 30 October 2011, 07:09:40 UTC |
| 16e3cf7 | Sritej Velaga | 28 October 2011, 12:57:11 UTC | qlcnic: skip IDC ack check in fw reset path. In fw reset path, we should consider any change in device state as an ack from the other driver. When that happens, we don't have to wait for an explicit ack. Signed-off-by: Sritej Velaga <sritej.velaga@qlogic.com> Signed-off-by: Anirban Chakraborty <anirban.chakraborty@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 30 October 2011, 07:09:39 UTC |
| 9eeebb5 | David S. Miller | 30 October 2011, 07:05:07 UTC | Merge branch 'batman-adv/maint' of git://git.open-mesh.org/linux-merge | 30 October 2011, 07:05:07 UTC |
| 3ddb709 | Geert Uytterhoeven | 28 October 2011, 10:53:32 UTC | i825xx: Fix incorrect dependency for BVME6000_NET Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 28 October 2011, 21:06:56 UTC |
| 7011687 | Gao feng | 28 October 2011, 02:46:57 UTC | ipv6: fix route error binding peer in func icmp6_dst_alloc in func icmp6_dst_alloc,dst_metric_set call ipv6_cow_metrics to set metric. ipv6_cow_metrics may will call rt6_bind_peer to set rt6_info->rt6i_peer. So,we should move ipv6_addr_copy before dst_metric_set to make sure rt6_bind_peer success. Signed-off-by: Gao feng <gaofeng@cn.fujitsu.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 28 October 2011, 20:36:07 UTC |
| 504744e | Zheng Yan | 28 October 2011, 04:26:00 UTC | ipv6: fix error propagation in ip6_ufo_append_data() We should return errcode from sock_alloc_send_skb() Signed-off-by: Zheng Yan <zheng.z.yan@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 28 October 2011, 04:26:00 UTC |
| 3c20f72 | Giuseppe CAVALLARO | 26 October 2011, 19:43:09 UTC | stmmac: update normal descriptor structure (v2) This patch updates the normal descriptor structure to work fine on new GMAC Synopsys chips. Normal descriptors were designed on the old MAC10/100 databook 1.91 where some bits were reserved: for example the tx checksum insertion and rx checksum offload. The patch maintains the back-compatibility with old MAC devices (tested on STx7109 MAC10/100) and adds new fields that actually new GMAC devices can use. For example, STx7109 (MAC10/100) will pass from the platform tx_coe = 0, enh_desc = 0, has_gmac = 0. A platform like Loongson1B (GMAC) will pass: tx_coe = 1, enh_desc = 0, has_gmac = 1. Thanks to Kelvin, he enhanced the normal descriptors for GMAC (on MIPS Loongson1B platform). Signed-off-by: Kelvin Cheung <keguang.zhang@gmail.com> Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 28 October 2011, 03:17:12 UTC |
| e2c57f8 | Angus Clark | 26 October 2011, 19:43:08 UTC | stmmac: fix NULL pointer dereference in capabilities fixup (v2) Signed-off-by: Angus Clark <angus.clark@st.com> Acked-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 28 October 2011, 03:17:11 UTC |
| 5e6efe8 | Giuseppe CAVALLARO | 26 October 2011, 19:43:07 UTC | stmmac: fix a bug while checking the HW cap reg (v2) The patch fixes a bug while checking the HW cap reg on old MAC10/100 where this feature is not available. Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 28 October 2011, 03:17:11 UTC |
| e3a7ae2 | Somnath Kotur | 27 October 2011, 07:14:05 UTC | be2net: Changing MAC Address of a VF was broken. Allow for MAC Address change of VF(SR-IOV case) on the fly- First add and then delete MAC Address to allow for 'out of pool' errors. When MAC Addr configured from a VM, the MAC on the NIC will aleady have the supplied MAC,so just copy the supplied MAC to the netdev structure before returning success to the stack Signed-off-by: Somnath Kotur <somnath.kotur@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 28 October 2011, 03:16:20 UTC |
| 106df1e | Somnath Kotur | 27 October 2011, 07:12:13 UTC | be2net: Refactored be_cmds.c file. Moved the .sge. field's population inside be_cmd_hdr_prepare. Populating wrb->tag0 and tag1 inside be_cmd_hdr_prepare Signed-off-by: Somnath Kotur <somnath.kotur@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 28 October 2011, 03:16:19 UTC |
| 6afc25c | Dmitry Kravkov | 27 October 2011, 05:13:54 UTC | bnx2x: update driver version to 1.70.30-0 Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 27 October 2011, 20:14:17 UTC |
| 5e5399d | Dmitry Kravkov | 27 October 2011, 05:13:53 UTC | bnx2x: use FW 7.0.29.0 The FW includes the following fixes: 1. (iSCSI) Arrival of un-solicited ASYNC message causes firmware to abort the connection with RST. 2. (FCoE) There is a probability that truncated FCoE packet on RX path won't get detected which might lead to FW assert. 3. (iSCSI) Arrival of target-initiated NOP-IN during intense ISCSI traffic might lead to FW assert. 4. (iSCSI) Chip hangs when in case of retransmission not aligned to 4-bytes from the beginning of iSCSI PDU. 5. (FCoE) Arrival of packets beyond task IO size can lead to crash. Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 27 October 2011, 20:14:16 UTC |
| bfdb582 | Yaniv Rosner | 27 October 2011, 05:13:52 UTC | bnx2x: Enable changing speed when port type is PORT_DA Signed-off-by: Yaniv Rosner <yanivr@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 27 October 2011, 20:14:16 UTC |
| 001cea7 | Yaniv Rosner | 27 October 2011, 05:09:48 UTC | bnx2x: Fix 54618se LED behavior Signed-off-by: Yaniv Rosner <yanivr@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 27 October 2011, 20:14:16 UTC |
| ce7c048 | Yaniv Rosner | 27 October 2011, 05:09:47 UTC | bnx2x: Fix RX/TX problem caused by the MAC layer This patch fixes a problem in which the host stops receiving data after restarting the interface. This issue is caused by combination of incorrect data path tap closure, along with missing MAC reset. Signed-off-by: Yaniv Rosner <yanivr@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 27 October 2011, 20:14:15 UTC |
| a9077bf | Yaniv Rosner | 27 October 2011, 05:09:46 UTC | bnx2x: Add link retry to 578xx-KR This fix solves a problem of no link on 578xx-KR by retrying to link up to four timer using the periodic function. Signed-off-by: Yaniv Rosner <yanivr@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 27 October 2011, 20:14:15 UTC |
| 26ffaf3 | Yaniv Rosner | 27 October 2011, 05:09:45 UTC | bnx2x: Fix LED blink rate for 578xx Adjust blink rate on 578xx to fit its clock rate. Signed-off-by: Yaniv Rosner <yanivr@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 27 October 2011, 20:14:14 UTC |
| b903d32 | Eric Dumazet | 27 October 2011, 04:44:35 UTC | ipv6: tcp: fix TCLASS value in ACK messages sent from TIME_WAIT commit 66b13d99d96a (ipv4: tcp: fix TOS value in ACK messages sent from TIME_WAIT) fixed IPv4 only. This part is for the IPv6 side, adding a tclass param to ip6_xmit() We alias tw_tclass and tw_tos, if socket family is INET6. [ if sockets is ipv4-mapped, only IP_TOS socket option is used to fill TOS field, TCLASS is not taken into account ] Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 27 October 2011, 04:44:35 UTC |
| 138c4ae | Linus Torvalds | 26 October 2011, 19:46:18 UTC | Merge branch 'slab/for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/penberg/linux * 'slab/for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/penberg/linux: tools, slub: Fix off-by-one buffer corruption after readlink() call slub: Discard slab page when node partial > minimum partial number slub: correct comments error for per cpu partial mm: restrict access to slab files under procfs and sysfs slub: Code optimization in get_partial_node() slub: doc: update the slabinfo.c file path slub: explicitly document position of inserting slab to partial list slub: update slabinfo tools to report per cpu partial list statistics slub: per cpu cache for partial pages slub: return object pointer from get_partial() / new_slab(). slub: pass kmem_cache_cpu pointer to get_partial() slub: Prepare inuse field in new_slab() slub: Remove useless statements in __slab_alloc slub: free slabs without holding locks slub: use print_hex_dump slab: use print_hex_dump | 26 October 2011, 19:46:18 UTC |
| 3b3dd79 | Linus Torvalds | 26 October 2011, 19:43:07 UTC | Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/vapier/blackfin * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/vapier/blackfin: Blackfin: irq: remove IRQF_DISABLED Blackfin: boards: clean up i2c_board_info Blackfin: drop unused Kconfig symbol Blackfin: bf537-stamp: register ASoC EVAL-ADAU1373 board driver Blackfin: bf537-stamp: Register adav801 codec and ASoC machine driver Blackfin: bf537-stamp: register adau1701 codec and asoc machine driver Blackfin: merge asm/mutex.h into kbuild too Blackfin: bf537-stamp: fix ad73311 codec config macro Blackfin: bf537-stamp: fix ad1836 name Blackfin: kgdb_test: rework code to avoid -O0 usage Blackfin: fix sparse warnings in copy_to/from_user Blackfin: bf548-ezkit: update defconfig Blackfin: SMP: fix scheduling deadlock Blackfin: H8606: fixup bogus ioresource init Blackfin: SMP: convert to common asm-generic/atomic.h | 26 October 2011, 19:43:07 UTC |
| c3ae1f3 | Linus Torvalds | 26 October 2011, 19:39:42 UTC | Merge branch 'for-linus' of git://neil.brown.name/md * 'for-linus' of git://neil.brown.name/md: (34 commits) md: Fix some bugs in recovery_disabled handling. md/raid5: fix bug that could result in reads from a failed device. lib/raid6: Fix filename emitted in generated code md.c: trivial comment fix MD: Allow restarting an interrupted incremental recovery. md: clear In_sync bit on devices added to an active array. md: add proper write-congestion reporting to RAID1 and RAID10. md: rename "mdk_personality" to "md_personality" md/bitmap remove fault injection options. md/raid5: typedef removal: raid5_conf_t -> struct r5conf md/raid1: typedef removal: conf_t -> struct r1conf md/raid10: typedef removal: conf_t -> struct r10conf md/raid0: typedef removal: raid0_conf_t -> struct r0conf md/multipath: typedef removal: multipath_conf_t -> struct mpconf md/linear: typedef removal: linear_conf_t -> struct linear_conf md/faulty: remove typedef: conf_t -> struct faulty_conf md/linear: remove typedefs: dev_info_t -> struct dev_info md: remove typedefs: mirror_info_t -> struct mirror_info md: remove typedefs: r10bio_t -> struct r10bio and r1bio_t -> struct r1bio md: remove typedefs: mdk_thread_t -> struct md_thread ... | 26 October 2011, 19:39:42 UTC |
| c28cfd6 | Linus Torvalds | 26 October 2011, 19:33:50 UTC | Merge branch 'for-linus' of git://git.open-osd.org/linux-open-osd * 'for-linus' of git://git.open-osd.org/linux-open-osd: (21 commits) ore: Enable RAID5 mounts exofs: Support for RAID5 read-4-write interface. ore: RAID5 Write ore: RAID5 read fs/Makefile: Always inspect exofs/ ore: Make ore_calc_stripe_info EXPORT_SYMBOL ore/exofs: Change ore_check_io API ore/exofs: Define new ore_verify_layout ore: Support for partial component table ore: Support for short read/writes exofs: Support for short read/writes ore: Remove check for ios->kern_buff in _prepare_for_striping to later ore: cleanup: Embed an ore_striping_info inside ore_io_state ore: Only IO one group at a time (API change) ore/exofs: Change the type of the devices array (API change) ore: Make ore_striping_info and ore_calc_stripe_info public exofs: Remove unused data_map member from exofs_sb_info exofs: Rename struct ore_components comps => oc exofs/super.c: local functions should be static exofs/ore.c: local functions should be static ... | 26 October 2011, 19:33:50 UTC |
| dfa4a42 | Linus Torvalds | 26 October 2011, 15:43:08 UTC | Merge branch 'x86-cleanups-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip * 'x86-cleanups-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86-64, unistd: Remove bogus __IGNORE_getcpu x86, mm, trivial: Remove unnecessary get_order() in free_thread_info() x86, cleanup: Remove unneeded version.h include from arch/x86/ | 26 October 2011, 15:43:08 UTC |
| 7b86572 | Linus Torvalds | 26 October 2011, 15:42:03 UTC | Merge branch 'x86-asm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip * 'x86-asm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86-64: Fix CFI data for interrupt frames x86-64: Don't apply destructive erratum workaround on unaffected CPUs | 26 October 2011, 15:42:03 UTC |
| 0791e98 | Linus Torvalds | 26 October 2011, 15:30:33 UTC | Merge branch 'x86-apic-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip * 'x86-apic-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/irq: Standardize on CONFIG_SPARSE_IRQ=y x86, ioapic: Clean up ioapic/apic_id usage x86, ioapic: Factor out print_IO_APIC() to only print one io apic x86, ioapic: Print out irte with right ioapic index x86, ioapic: Split up setup_ioapic_entry() x86, ioapic: Pass struct irq_attr * to setup_ioapic_irq() apic, i386/bigsmp: Fix false warnings regarding logical APIC ID mismatches | 26 October 2011, 15:30:33 UTC |
| edb34a4 | Linus Torvalds | 26 October 2011, 15:21:19 UTC | Remove stale "depends on NETDEV_1000"in staging drivers Mark Einon points out that the Kconfig option for NETDEV_1000 no longer exists, and the merge of the staging drivers should have removed that for the et131x driver. And while checking for it, I noticed that slicoss had the same stale dependency. Remove that one too. Reported-by: Mark Einon <mark.einon@gmail.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 26 October 2011, 15:21:19 UTC |
| 39adff5 | Linus Torvalds | 26 October 2011, 15:15:03 UTC | Merge branch 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip * 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (23 commits) time, s390: Get rid of compile warning dw_apb_timer: constify clocksource name time: Cleanup old CONFIG_GENERIC_TIME references that snuck in time: Change jiffies_to_clock_t() argument type to unsigned long alarmtimers: Fix error handling clocksource: Make watchdog reset lockless posix-cpu-timers: Cure SMP accounting oddities s390: Use direct ktime path for s390 clockevent device clockevents: Add direct ktime programming function clockevents: Make minimum delay adjustments configurable nohz: Remove "Switched to NOHz mode" debugging messages proc: Consider NO_HZ when printing idle and iowait times nohz: Make idle/iowait counter update conditional nohz: Fix update_ts_time_stat idle accounting cputime: Clean up cputime_to_usecs and usecs_to_cputime macros alarmtimers: Rework RTC device selection using class interface alarmtimers: Add try_to_cancel functionality alarmtimers: Add more refined alarm state tracking alarmtimers: Remove period from alarm structure alarmtimers: Remove interval cap limit hack ... | 26 October 2011, 15:15:03 UTC |
| e182a34 | Pekka Enberg | 26 October 2011, 15:09:12 UTC | Merge branches 'slab/next' and 'slub/partial' into slab/for-linus | 26 October 2011, 15:09:12 UTC |
| 8a4a891 | Linus Torvalds | 26 October 2011, 15:08:43 UTC | Merge branch 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip * 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (46 commits) llist: Add back llist_add_batch() and llist_del_first() prototypes sched: Don't use tasklist_lock for debug prints sched: Warn on rt throttling sched: Unify the ->cpus_allowed mask copy sched: Wrap scheduler p->cpus_allowed access sched: Request for idle balance during nohz idle load balance sched: Use resched IPI to kick off the nohz idle balance sched: Fix idle_cpu() llist: Remove cpu_relax() usage in cmpxchg loops sched: Convert to struct llist llist: Add llist_next() irq_work: Use llist in the struct irq_work logic llist: Return whether list is empty before adding in llist_add() llist: Move cpu_relax() to after the cmpxchg() llist: Remove the platform-dependent NMI checks llist: Make some llist functions inline sched, tracing: Show PREEMPT_ACTIVE state in trace_sched_switch sched: Remove redundant test in check_preempt_tick() sched: Add documentation for bandwidth control sched: Return unused runtime on group dequeue ... | 26 October 2011, 15:08:43 UTC |
| 8686a0e | Linus Torvalds | 26 October 2011, 15:07:07 UTC | Merge branch 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86: Fix insn decoder for longer instruction | 26 October 2011, 15:07:07 UTC |
| 7115e3f | Linus Torvalds | 26 October 2011, 15:03:38 UTC | Merge branch 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip * 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (121 commits) perf symbols: Increase symbol KSYM_NAME_LEN size perf hists browser: Refuse 'a' hotkey on non symbolic views perf ui browser: Use libslang to read keys perf tools: Fix tracing info recording perf hists browser: Elide DSO column when it is set to just one DSO, ditto for threads perf hists: Don't consider filtered entries when calculating column widths perf hists: Don't decay total_period for filtered entries perf hists browser: Honour symbol_conf.show_{nr_samples,total_period} perf hists browser: Do not exit on tab key with single event perf annotate browser: Don't change selection line when returning from callq perf tools: handle endianness of feature bitmap perf tools: Add prelink suggestion to dso update message perf script: Fix unknown feature comment perf hists browser: Apply the dso and thread filters when merging new batches perf hists: Move the dso and thread filters from hist_browser perf ui browser: Honour the xterm colors perf top tui: Give color hints just on the percentage, like on --stdio perf ui browser: Make the colors configurable and change the defaults perf tui: Remove unneeded call to newtCls on startup perf hists: Don't format the percentage on hist_entry__snprintf ... Fix up conflicts in arch/x86/kernel/kprobes.c manually. Ingo's tree did the insane "add volatile to const array", which just doesn't make sense ("volatile const"?). But we could remove the const *and* make the array volatile to make doubly sure that gcc doesn't optimize it away.. Also fix up kernel/trace/ring_buffer.c non-data-conflicts manually: the reader_lock has been turned into a raw lock by the core locking merge, and there was a new user of it introduced in this perf core merge. Make sure that new use also uses the raw accessor functions. | 26 October 2011, 15:03:38 UTC |
| 1f6e051 | Linus Torvalds | 26 October 2011, 14:44:09 UTC | Merge branch 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip * 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: genirq: Add IRQF_RESUME_EARLY and resume such IRQs earlier genirq: Fix fatfinered fixup really genirq: percpu: allow interrupt type to be set at enable time genirq: Add support for per-cpu dev_id interrupts genirq: Add IRQCHIP_SKIP_SET_WAKE flag | 26 October 2011, 14:44:09 UTC |
| 19b4a8d | Linus Torvalds | 26 October 2011, 14:26:53 UTC | Merge branch 'core-rcu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip * 'core-rcu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (45 commits) rcu: Move propagation of ->completed from rcu_start_gp() to rcu_report_qs_rsp() rcu: Remove rcu_needs_cpu_flush() to avoid false quiescent states rcu: Wire up RCU_BOOST_PRIO for rcutree rcu: Make rcu_torture_boost() exit loops at end of test rcu: Make rcu_torture_fqs() exit loops at end of test rcu: Permit rt_mutex_unlock() with irqs disabled rcu: Avoid having just-onlined CPU resched itself when RCU is idle rcu: Suppress NMI backtraces when stall ends before dump rcu: Prohibit grace periods during early boot rcu: Simplify unboosting checks rcu: Prevent early boot set_need_resched() from __rcu_pending() rcu: Dump local stack if cannot dump all CPUs' stacks rcu: Move __rcu_read_unlock()'s barrier() within if-statement rcu: Improve rcu_assign_pointer() and RCU_INIT_POINTER() documentation rcu: Make rcu_assign_pointer() unconditionally insert a memory barrier rcu: Make rcu_implicit_dynticks_qs() locals be correct size rcu: Eliminate in_irq() checks in rcu_enter_nohz() nohz: Remove nohz_cpu_mask rcu: Document interpretation of RCU-lockdep splats rcu: Allow rcutorture's stat_interval parameter to be changed at runtime ... | 26 October 2011, 14:26:53 UTC |
| 3cfef95 | Linus Torvalds | 26 October 2011, 14:17:32 UTC | Merge branch 'core-locking-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip * 'core-locking-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (27 commits) rtmutex: Add missing rcu_read_unlock() in debug_rt_mutex_print_deadlock() lockdep: Comment all warnings lib: atomic64: Change the type of local lock to raw_spinlock_t locking, lib/atomic64: Annotate atomic64_lock::lock as raw locking, x86, iommu: Annotate qi->q_lock as raw locking, x86, iommu: Annotate irq_2_ir_lock as raw locking, x86, iommu: Annotate iommu->register_lock as raw locking, dma, ipu: Annotate bank_lock as raw locking, ARM: Annotate low level hw locks as raw locking, drivers/dca: Annotate dca_lock as raw locking, powerpc: Annotate uic->lock as raw locking, x86: mce: Annotate cmci_discover_lock as raw locking, ACPI: Annotate c3_lock as raw locking, oprofile: Annotate oprofilefs lock as raw locking, video: Annotate vga console lock as raw locking, latencytop: Annotate latency_lock as raw locking, timer_stats: Annotate table_lock as raw locking, rwsem: Annotate inner lock as raw locking, semaphores: Annotate inner lock as raw locking, sched: Annotate thread_group_cputimer as raw ... Fix up conflicts in kernel/posix-cpu-timers.c manually: making cputimer->cputime a raw lock conflicted with the ABBA fix in commit bcd5cff7216f ("cputimer: Cure lock inversion"). | 26 October 2011, 14:17:32 UTC |
| 9826530 | Linus Torvalds | 26 October 2011, 14:11:53 UTC | Merge branch 'core-iommu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip * 'core-iommu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86, ioapic: Consolidate the explicit EOI code x86, ioapic: Restore the mask bit correctly in eoi_ioapic_irq() x86, kdump, ioapic: Reset remote-IRR in clear_IO_APIC iommu: Rename the DMAR and INTR_REMAP config options x86, ioapic: Define irq_remap_modify_chip_defaults() x86, msi, intr-remap: Use the ioapic set affinity routine iommu: Cleanup ifdefs in detect_intel_iommu() iommu: No need to set dmar_disabled in check_zero_address() iommu: Move IOMMU specific code to intel-iommu.c intr_remap: Call dmar_dev_scope_init() explicitly x86, x2apic: Enable the bios request for x2apic optout | 26 October 2011, 14:11:53 UTC |
| 37d96c2 | Linus Torvalds | 26 October 2011, 14:08:52 UTC | Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: caif: Fix BUG() with network namespaces net: make bonding slaves honour master's skb->priority net: Unlock sock before calling sk_free() | 26 October 2011, 14:08:52 UTC |
| aa77677 | Linus Torvalds | 26 October 2011, 13:39:02 UTC | Merge branch 'staging-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging * 'staging-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (1519 commits) staging: et131x: Remove redundant check and return statement staging: et131x: Mainly whitespace changes to appease checkpatch staging: et131x: Remove last of the forward declarations staging: et131x: Remove even more forward declarations staging: et131x: Remove yet more forward declarations staging: et131x: Remove more forward declarations staging: et131x: Remove forward declaration of et131x_adapter_setup staging: et131x: Remove some forward declarations staging: et131x: Remove unused rx_ring.recv_packet_pool staging: et131x: Remove call to find pci pm capability staging: et131x: Remove redundant et131x_reset_recv() call staging: et131x: Remove unused rx_ring.recv_buffer_pool Staging: bcm: Fix three initialization errors in InterfaceDld.c Staging: bcm: Fix coding style issues in InterfaceDld.c staging:iio:dac: Add AD5360 driver staging:iio:trigger:bfin-timer: Fix compile error Staging: vt6655: add some range checks before memcpy() Staging: vt6655: whitespace fixes to iotcl.c Staging: vt6656: add some range checks before memcpy() Staging: vt6656: whitespace cleanups in ioctl.c ... Fix up conflicts in: - drivers/{Kconfig,Makefile}, drivers/staging/{Kconfig,Makefile}: vg driver movement - drivers/staging/brcm80211/brcmfmac/{dhd_linux.c,mac80211_if.c}: driver removal vs now stale changes - drivers/staging/rtl8192e/r8192E_core.c: driver removal vs now stale changes - drivers/staging/et131x/et131*: driver consolidation into one file, tried to do fixups | 26 October 2011, 13:39:02 UTC |
| efb8d21 | Linus Torvalds | 26 October 2011, 13:11:09 UTC | Merge branch 'tty-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty * 'tty-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (79 commits) TTY: serial_core: Fix crash if DCD drop during suspend tty/serial: atmel_serial: bootconsole removed from auto-enumerates Revert "TTY: call tty_driver_lookup_tty unconditionally" tty/serial: atmel_serial: add device tree support tty/serial: atmel_serial: auto-enumerate ports tty/serial: atmel_serial: whitespace and braces modifications tty/serial: atmel_serial: change platform_data variable name tty/serial: RS485 bindings for device tree TTY: call tty_driver_lookup_tty unconditionally TTY: pty, release tty in all ptmx_open fail paths TTY: make tty_add_file non-failing TTY: drop driver reference in tty_open fail path 8250_pci: Fix kernel panic when pch_uart is disabled h8300: drivers/serial/Kconfig was moved parport_pc: release IO region properly if unsupported ITE887x card is found tty: Support compat_ioctl get/set termios_locked hvc_console: display printk messages on console. TTY: snyclinkmp: forever loop in tx_load_dma_buffer() tty/n_gsm: avoid fifo overflow in gsm_dlci_data_output tty/n_gsm: fix a bug in gsm_dlci_data_output (adaption = 2 case) ... Fix up Conflicts in: - drivers/tty/serial/8250_pci.c Trivial conflict with removed duplicate device ID - drivers/tty/serial/atmel_serial.c Annoying silly conflict between "specify the port num via platform_data" and other changes to atmel_console_init | 26 October 2011, 13:11:09 UTC |
| 3cb6032 | Linus Torvalds | 26 October 2011, 12:52:52 UTC | Merge branch 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging * 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: (26 commits) hwmon: (w83627ehf) Better fix for negative temperature values hwmon: (w83627ehf) Uninline is_word_sized hwmon: (lm75) Document why clones are not detected hwmon: (w83627ehf) Move fan pins check to a separate function hwmon: (w83627ehf) Skip reading unused voltage registers hwmon: (lm75) Add support for Analog Devices ADT75 hwmon: (pmbus_core) Simplify sign extensions hwmon: (pmbus) Add support for Lineage Power DC-DC converters hwmon: (pmbus/ltc2978) Add support for LTC3880 to LTC2978 driver hwmon: (pmbus/ltc2978) Explicit driver for LTC2978 hwmon: (pmbus) Add support for TEMP2 peak attributes hwmon: AD7314 driver (ported from IIO) hwmon: (pmbus) Add support for Intersil power management chips hwmon: (pmbus) Always call _pmbus_read_byte in core driver hwmon: (pmbus) Replace EINVAL return codes with more appropriate errors hwmon: (pmbus) Provide more documentation hwmon/f71882fg: Make the decision wether to register fan attr. per fan hwmon/f71882fg: Add a f71882fg_create_fan_sysfs_files helper function hwmon/f71882fg: Make all fan/pwm attr tables 2 dimensional hwmon: (exynos4_tmu) Remove IRQF_DISABLED ... | 26 October 2011, 12:52:52 UTC |
| 2355e42 | Linus Torvalds | 26 October 2011, 12:39:47 UTC | Merge git://github.com/rustyrussell/linux * git://github.com/rustyrussell/linux: params: make dashes and underscores in parameter names truly equal kmod: prevent kmod_loop_msg overflow in __request_module() | 26 October 2011, 12:39:47 UTC |
| e33bae1 | Linus Torvalds | 26 October 2011, 12:20:53 UTC | Merge branch 'for-linus' of git://github.com/ericvh/linux * 'for-linus' of git://github.com/ericvh/linux: 9p: fix 9p.txt to advertise msize instead of maxdata net/9p: Convert net/9p protocol dumps to tracepoints fs/9p: change an int to unsigned int fs/9p: Cleanup option parsing in 9p 9p: move dereference after NULL check fs/9p: inode file operation is properly initialized init_special_inode fs/9p: Update zero-copy implementation in 9p | 26 October 2011, 12:20:53 UTC |
| 7832bb5 | Yong Zhang | 07 September 2011, 08:10:03 UTC | Blackfin: irq: remove IRQF_DISABLED This flag is a NOOP and can be removed now. Signed-off-by: Yong Zhang <yong.zhang0@gmail.com> Acked-by: Bob Liu <lliubbo@kernel.org> Signed-off-by: Mike Frysinger <vapier@gentoo.org> | 26 October 2011, 08:22:26 UTC |
| b1e4d20 | Michal Schmidt | 09 October 2011, 22:03:37 UTC | params: make dashes and underscores in parameter names truly equal The user may use "foo-bar" for a kernel parameter defined as "foo_bar". Make sure it works the other way around too. Apply the equality of dashes and underscores on early_params and __setup params as well. The example given in Documentation/kernel-parameters.txt indicates that this is the intended behaviour. With the patch the kernel accepts "log-buf-len=1M" as expected. https://bugzilla.redhat.com/show_bug.cgi?id=744545 Signed-off-by: Michal Schmidt <mschmidt@redhat.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> (neatened implementations) | 26 October 2011, 02:40:39 UTC |
| 37252db | Jiri Kosina | 26 October 2011, 02:40:39 UTC | kmod: prevent kmod_loop_msg overflow in __request_module() Due to post-increment in condition of kmod_loop_msg in __request_module(), the system log can be spammed by much more than 5 instances of the 'runaway loop' message if the number of events triggering it makes the kmod_loop_msg to overflow. Fix that by making sure we never increment it past the threshold. Signed-off-by: Jiri Kosina <jkosina@suse.cz> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> CC: stable@kernel.org | 26 October 2011, 02:40:39 UTC |
| d890fa2 | NeilBrown | 26 October 2011, 00:54:39 UTC | md: Fix some bugs in recovery_disabled handling. In 3.0 we changed the way recovery_disabled was handle so that instead of testing against zero, we test an mddev-> value against a conf-> value. Two problems: 1/ one place in raid1 was missed and still sets to '1'. 2/ We didn't explicitly set the conf-> value at array creation time. It defaulted to '0' just like the mddev value does so they could appear equal and thus disable recovery. This did not affect normal 'md' as it calls bind_rdev_to_array which changes the mddev value. However the dmraid interface doesn't call this and so doesn't change ->recovery_disabled; so at array start all recovery is incorrectly disabled. So initialise the 'conf' value to one less that the mddev value, so the will only be the same when explicitly set that way. Reported-by: Jonathan Brassow <jbrassow@redhat.com> Signed-off-by: NeilBrown <neilb@suse.de> | 26 October 2011, 00:54:39 UTC |
| 23405b0 | Michael Hennerich | 25 October 2011, 07:54:59 UTC | Blackfin: boards: clean up i2c_board_info Remove i2c_board_info for driver that doesn't exist anymore. Delete irq_flags for drivers that don't use them anymore. Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org> | 25 October 2011, 23:52:02 UTC |
| 5101ea9 | Paul Bolle | 14 October 2011, 12:27:27 UTC | Blackfin: drop unused Kconfig symbol Signed-off-by: Paul Bolle <pebolle@tiscali.nl> Signed-off-by: Mike Frysinger <vapier@gentoo.org> | 25 October 2011, 23:51:59 UTC |
| af80d0d | Lars-Peter Clausen | 30 August 2011, 18:02:50 UTC | Blackfin: bf537-stamp: register ASoC EVAL-ADAU1373 board driver Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Scott Jiang <scott.jiang.linux@gmail.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org> | 25 October 2011, 23:51:56 UTC |
| 080ae07 | Lars-Peter Clausen | 30 August 2011, 17:33:06 UTC | Blackfin: bf537-stamp: Register adav801 codec and ASoC machine driver There is already an entry in the spi device table for the codec, but the modalias was wrong. Also the config symbol name for the codec is wrong, so this is fixed as well. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Scott Jiang <scott.jiang.linux@gmail.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org> | 25 October 2011, 23:51:53 UTC |
| 2fba06f | Lars-Peter Clausen | 30 August 2011, 17:12:26 UTC | Blackfin: bf537-stamp: register adau1701 codec and asoc machine driver Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Scott Jiang <scott.jiang.linux@gmail.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org> | 25 October 2011, 23:51:50 UTC |
| 2db1f97 | Mike Frysinger | 20 August 2011, 03:51:52 UTC | Blackfin: merge asm/mutex.h into kbuild too This header was being rewritten while the asm-generic kbuild support was in flight, so it missed out on the update. Punt the stub and use the kbuild now that everything has settled. Signed-off-by: Mike Frysinger <vapier@gentoo.org> | 25 October 2011, 23:51:47 UTC |
| e0754d8 | Scott Jiang | 16 August 2011, 23:08:42 UTC | Blackfin: bf537-stamp: fix ad73311 codec config macro SND_BF5XX_SOC is for machine drivers while SND_SOC is for codec drivers. Signed-off-by: Scott Jiang <scott.jiang.linux@gmail.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org> | 25 October 2011, 23:51:44 UTC |
