Revision 5b353bab3fd334a89197efd4ac1e2b013988dc8e authored by Akinori Musha on 05 August 2002, 18:04:50 UTC, committed by Akinori Musha on 05 August 2002, 18:04:50 UTC
1 parent 4b36f08
Makefile.inc1
#
# $FreeBSD$
#
# Make command line options:
# -DMAKE_KERBEROS4 to build KerberosIV
# -DMAKE_KERBEROS5 to build Kerberos5
# -DNOCLEANDIR run ${MAKE} clean, instead of ${MAKE} cleandir
# -DNOCLEAN do not clean at all
# -DNOCRYPT will prevent building of crypt versions
# -DNOPROFILE do not build profiled libraries
# -DNOSECURE do not go into secure subdir
# -DNOGAMES do not go into games subdir
# -DNOSHARE do not go into share subdir
# -DNOINFO do not make or install info files
# -DNOLIBC_R do not build libc_r.
# -DNO_FORTRAN do not build g77 and related libraries.
# -DNO_KERNELCONFIG do not run config in ${MAKE} buildkernel
# -DNO_KERNELCLEAN do not run ${MAKE} clean in ${MAKE} buildkernel
# -DNO_KERNELDEPEND do not run ${MAKE} depend in ${MAKE} buildkernel
# -DNO_PORTSUPDATE do not update ports in ${MAKE} update
# -DNO_DOCUPDATE do not update doc in ${MAKE} update
# LOCAL_DIRS="list of dirs" to add additional dirs to the SUBDIR list
# TARGET_ARCH="arch" to crossbuild world to a different arch
#
# The intended user-driven targets are:
# buildworld - rebuild *everything*, including glue to help do upgrades
# installworld- install everything built by "buildworld"
# update - convenient way to update your source tree (eg: sup/cvs)
# most - build user commands, no libraries or include files
# installmost - install user commands, no libraries or include files
#
# Standard targets (not defined here) are documented in the makefiles in
# /usr/share/mk. These include:
# obj depend all install clean cleandepend cleanobj
# Put initial settings here.
SUBDIR=
# We must do share/info early so that installation of info `dir'
# entries works correctly. Do it first since it is less likely to
# grow dependencies on include and lib than vice versa.
.if exists(${.CURDIR}/share/info)
SUBDIR+= share/info
.endif
# We must do include and lib early so that the perl *.ph generation
# works correctly as it uses the header files installed by this.
.if exists(${.CURDIR}/include)
SUBDIR+= include
.endif
.if exists(${.CURDIR}/lib)
SUBDIR+= lib
.endif
.if exists(${.CURDIR}/bin)
SUBDIR+= bin
.endif
.if exists(${.CURDIR}/games) && !defined(NOGAMES)
SUBDIR+= games
.endif
.if exists(${.CURDIR}/gnu)
SUBDIR+= gnu
.endif
.if exists(${.CURDIR}/kerberosIV) && exists(${.CURDIR}/crypto) && \
!defined(NOCRYPT) && !defined(NO_OPENSSL) && defined(MAKE_KERBEROS4)
SUBDIR+= kerberosIV
.endif
.if exists(${.CURDIR}/kerberos5) && exists(${.CURDIR}/crypto) && \
!defined(NOCRYPT) && !defined(NO_OPENSSL) && defined(MAKE_KERBEROS5)
SUBDIR+= kerberos5
.endif
.if exists(${.CURDIR}/libexec)
SUBDIR+= libexec
.endif
.if exists(${.CURDIR}/sbin)
SUBDIR+= sbin
.endif
.if exists(${.CURDIR}/secure) && !defined(NOCRYPT) && !defined(NOSECURE)
SUBDIR+= secure
.endif
.if exists(${.CURDIR}/share) && !defined(NOSHARE)
SUBDIR+= share
.endif
.if exists(${.CURDIR}/sys)
SUBDIR+= sys
.endif
.if exists(${.CURDIR}/usr.bin)
SUBDIR+= usr.bin
.endif
.if exists(${.CURDIR}/usr.sbin)
SUBDIR+= usr.sbin
.endif
# etc must be last for "distribute" to work
.if exists(${.CURDIR}/etc)
SUBDIR+= etc
.endif
# These are last, since it is nice to at least get the base system
# rebuilt before you do them.
.if defined(LOCAL_DIRS)
.for _DIR in ${LOCAL_DIRS}
.if exists(${.CURDIR}/${_DIR}) & exists(${.CURDIR}/${_DIR}/Makefile)
SUBDIR+= ${_DIR}
.endif
.endfor
.endif
.if defined(SUBDIR_OVERRIDE)
SUBDIR= ${SUBDIR_OVERRIDE}
.endif
.if defined(NOCLEANDIR)
CLEANDIR= clean cleandepend
.else
CLEANDIR= cleandir
.endif
SUP?= /usr/local/bin/cvsup
SUPFLAGS?= -g -L 2 -P -
.if defined(SUPHOST)
SUPFLAGS+= -h ${SUPHOST}
.endif
MAKEOBJDIRPREFIX?= /usr/obj
TARGET_ARCH?= ${MACHINE_ARCH}
.if ${TARGET_ARCH} == ${MACHINE_ARCH}
TARGET?= ${MACHINE}
.else
TARGET?= ${TARGET_ARCH}
.endif
.if make(buildworld)
BUILD_ARCH!= sysctl -n hw.machine_arch
.if ${MACHINE_ARCH} != ${BUILD_ARCH}
.error To cross-build, set TARGET_ARCH.
.endif
.endif
.if ${MACHINE} == ${TARGET}
OBJTREE= ${MAKEOBJDIRPREFIX}
.else
OBJTREE= ${MAKEOBJDIRPREFIX}/${TARGET}
.endif
WORLDTMP= ${OBJTREE}${.CURDIR}/${MACHINE_ARCH}
# /usr/games added for fortune which depend on strfile
STRICTTMPPATH= ${WORLDTMP}/usr/sbin:${WORLDTMP}/usr/bin:${WORLDTMP}/usr/games
TMPPATH= ${STRICTTMPPATH}:${PATH}
OBJFORMAT_PATH?= /usr/libexec
TMPDIR?= /tmp
TMPPID!= echo $$$$
INSTALLTMP= ${TMPDIR}/install.${TMPPID}
#
# Building a world goes through the following stages
#
# 1. bootstrap-tool stage [BMAKE]
# This stage is responsible for creating programs that
# are needed for backward compatibility reasons. They
# are not built as cross-tools.
# 2. build-tool stage [TMAKE]
# This stage is responsible for creating the object
# tree and building any tools that are needed during
# the build process.
# 3. cross-tool stage [XMAKE]
# This stage is responsible for creating any tools that
# are needed for cross-builds. A cross-compiler is one
# of them.
# 4. world stage [WMAKE]
# This stage actually builds the world.
# 5. install stage (optional) [IMAKE]
# This stage installs a previously built world.
#
# Common environment for world related stages
CROSSENV= MAKEOBJDIRPREFIX=${OBJTREE} \
MACHINE_ARCH=${TARGET_ARCH} \
MACHINE=${TARGET} \
OBJFORMAT_PATH=${WORLDTMP}/usr/libexec \
PERL5LIB=${WORLDTMP}/usr/libdata/perl/5.00503 \
GROFF_BIN_PATH=${WORLDTMP}/usr/bin \
GROFF_FONT_PATH=${WORLDTMP}/usr/share/groff_font \
GROFF_TMAC_PATH=${WORLDTMP}/usr/share/tmac
# bootstrap-tool stage
BMAKEENV= MAKEOBJDIRPREFIX=${WORLDTMP} \
DESTDIR= \
INSTALL="sh ${.CURDIR}/tools/install.sh"
BMAKE= ${BMAKEENV} ${MAKE} -f Makefile.inc1 -DBOOTSTRAPPING \
-DNOHTML -DNOINFO -DNOMAN -DNOPIC -DNOPROFILE -DNOSHARED \
-DNO_WERROR
# build-tool stage
TMAKEENV= MAKEOBJDIRPREFIX=${OBJTREE} \
DESTDIR= \
INSTALL="sh ${.CURDIR}/tools/install.sh"
TMAKE= ${TMAKEENV} ${MAKE} -f Makefile.inc1 -DBOOTSTRAPPING
# cross-tool stage
XMAKE= TOOLS_PREFIX=${WORLDTMP} ${BMAKE} -DNO_FORTRAN -DNO_GDB
# world stage
WMAKEENV= ${CROSSENV} \
DESTDIR=${WORLDTMP} \
INSTALL="sh ${.CURDIR}/tools/install.sh" \
PATH=${TMPPATH}
WMAKE= ${WMAKEENV} ${MAKE} -f Makefile.inc1
# install stage
IMAKEENV= ${CROSSENV} \
PATH=${STRICTTMPPATH}:${INSTALLTMP}
IMAKE= ${IMAKEENV} ${MAKE} -f Makefile.inc1
# kernel stage
KMAKEENV= ${WMAKEENV} \
OBJFORMAT_PATH=${WORLDTMP}/usr/libexec:${OBJFORMAT_PATH}
USRDIRS= usr/bin usr/lib/compat/aout usr/games usr/libdata/ldscripts \
usr/libexec/${OBJFORMAT} usr/sbin usr/share/misc \
usr/share/dict \
usr/share/groff_font/devX100 \
usr/share/groff_font/devX100-12 \
usr/share/groff_font/devX75 \
usr/share/groff_font/devX75-12 \
usr/share/groff_font/devascii \
usr/share/groff_font/devcp1047 \
usr/share/groff_font/devdvi \
usr/share/groff_font/devhtml \
usr/share/groff_font/devkoi8-r \
usr/share/groff_font/devlatin1 \
usr/share/groff_font/devlbp \
usr/share/groff_font/devlj4 \
usr/share/groff_font/devps \
usr/share/groff_font/devutf8 \
usr/share/tmac/mdoc usr/share/tmac/mm
INCDIRS= arpa dev fs g++/std isc isofs libmilter objc openssl \
protocols readline rpc rpcsvc security ufs
#
# buildworld
#
# Attempt to rebuild the entire system, with reasonable chance of
# success, regardless of how old your existing system is.
#
_worldtmp:
@echo
@echo "--------------------------------------------------------------"
@echo ">>> Rebuilding the temporary build tree"
@echo "--------------------------------------------------------------"
.if !defined(NOCLEAN)
rm -rf ${WORLDTMP}
.else
# XXX - These two can depend on any header file.
rm -f ${OBJTREE}${.CURDIR}/usr.bin/kdump/ioctl.c
rm -f ${OBJTREE}${.CURDIR}/usr.bin/truss/ioctl.c
.endif
.for _dir in ${USRDIRS}
mkdir -p ${WORLDTMP}/${_dir}
.endfor
.for _dir in ${INCDIRS}
mkdir -p ${WORLDTMP}/usr/include/${_dir}
.endfor
ln -sf ${.CURDIR}/sys ${WORLDTMP}
_bootstrap-tools:
@echo
@echo "--------------------------------------------------------------"
@echo ">>> stage 1: bootstrap tools"
@echo "--------------------------------------------------------------"
cd ${.CURDIR}; ${BMAKE} bootstrap-tools
_cleanobj:
.if !defined(NOCLEAN)
@echo
@echo "--------------------------------------------------------------"
@echo ">>> stage 2: cleaning up the object tree"
@echo "--------------------------------------------------------------"
cd ${.CURDIR}; ${WMAKE} ${CLEANDIR:S/^/par-/}
.endif
_obj:
@echo
@echo "--------------------------------------------------------------"
@echo ">>> stage 2: rebuilding the object tree"
@echo "--------------------------------------------------------------"
cd ${.CURDIR}; ${WMAKE} par-obj
_build-tools:
@echo
@echo "--------------------------------------------------------------"
@echo ">>> stage 2: build tools"
@echo "--------------------------------------------------------------"
cd ${.CURDIR}; ${TMAKE} build-tools
_cross-tools:
@echo
@echo "--------------------------------------------------------------"
@echo ">>> stage 3: cross tools"
@echo "--------------------------------------------------------------"
cd ${.CURDIR}; ${XMAKE} cross-tools
_includes:
@echo
@echo "--------------------------------------------------------------"
@echo ">>> stage 4: populating ${WORLDTMP}/usr/include"
@echo "--------------------------------------------------------------"
cd ${.CURDIR}; ${WMAKE} SHARED=symlinks par-includes
_libraries:
@echo
@echo "--------------------------------------------------------------"
@echo ">>> stage 4: building libraries"
@echo "--------------------------------------------------------------"
cd ${.CURDIR}; ${WMAKE} -DNOHTML -DNOINFO -DNOMAN -DNOFSCHG libraries
_depend:
@echo
@echo "--------------------------------------------------------------"
@echo ">>> stage 4: make dependencies"
@echo "--------------------------------------------------------------"
cd ${.CURDIR}; ${WMAKE} par-depend
everything:
@echo
@echo "--------------------------------------------------------------"
@echo ">>> stage 4: building everything.."
@echo "--------------------------------------------------------------"
cd ${.CURDIR}; ${WMAKE} all
WMAKE_TGTS=
.if !defined(SUBDIR_OVERRIDE)
WMAKE_TGTS+= _worldtmp _bootstrap-tools
.endif
WMAKE_TGTS+= _cleanobj _obj _build-tools
.if !defined(SUBDIR_OVERRIDE)
WMAKE_TGTS+= _cross-tools
.endif
WMAKE_TGTS+= _includes _libraries _depend everything
buildworld: ${WMAKE_TGTS}
.ORDER: ${WMAKE_TGTS}
#
# installcheck
#
# Checks to be sure system is ready for installworld
#
installcheck:
.if !defined(NO_SENDMAIL)
@if ! `grep -q '^smmsp:' /etc/passwd`; then \
echo "ERROR: Required smmsp user is missing, see /usr/src/UPDATING."; \
false; \
fi
@if ! `grep -q '^smmsp:' /etc/group`; then \
echo "ERROR: Required smmsp group is missing, see /usr/src/UPDATING."; \
false; \
fi
.endif
#
# distributeworld
#
# Distributes everything compiled by a `buildworld'.
#
# installworld
#
# Installs everything compiled by a 'buildworld'.
#
distributeworld installworld: installcheck
mkdir -p ${INSTALLTMP}
for prog in [ awk cat chflags chmod chown date echo egrep find grep \
ln make makewhatis mtree mv perl pwd_mkdb rm sed sh sysctl \
test true uname wc zic; do \
cp `which $$prog` ${INSTALLTMP}; \
done
cd ${.CURDIR}; ${IMAKE} re${.TARGET:S/world$//}
rm -rf ${INSTALLTMP}
#
# reinstall
#
# If you have a build server, you can NFS mount the source and obj directories
# and do a 'make reinstall' on the *client* to install new binaries from the
# most recent server build.
#
reinstall:
@echo "--------------------------------------------------------------"
@echo ">>> Making hierarchy"
@echo "--------------------------------------------------------------"
cd ${.CURDIR}; ${MAKE} -f Makefile.inc1 hierarchy
@echo
@echo "--------------------------------------------------------------"
@echo ">>> Installing everything.."
@echo "--------------------------------------------------------------"
cd ${.CURDIR}; ${MAKE} -f Makefile.inc1 install
.if !defined(NOMAN) && !defined(NO_MAKEDB_RUN)
@echo
@echo "--------------------------------------------------------------"
@echo ">>> Rebuilding man page indices"
@echo "--------------------------------------------------------------"
cd ${.CURDIR}/share/man; ${MAKE} makedb
.endif
redistribute:
@echo "--------------------------------------------------------------"
@echo ">>> Distributing everything.."
@echo "--------------------------------------------------------------"
cd ${.CURDIR}; ${MAKE} -f Makefile.inc1 distribute
#
# buildkernel and installkernel
#
# Which kernels to build and/or install is specified by setting
# KERNCONF. If not defined a GENERIC kernel is built/installed.
# Only the existing (depending TARGET) config files are used
# for building kernels and only the first of these is designated
# as the one being installed.
#
# Note that we have to use TARGET instead of TARGET_ARCH when
# we're in kernel-land. Since only TARGET_ARCH is (expected) to
# be set to cross-build, we have to make sure TARGET is set
# properly.
.if !defined(KERNCONF) && defined(KERNEL)
KERNCONF= ${KERNEL}
KERNWARN= yes
.else
KERNCONF?= GENERIC
.endif
INSTKERNNAME?= kernel
KRNLSRCDIR= ${.CURDIR}/sys
KRNLCONFDIR= ${KRNLSRCDIR}/${TARGET}/conf
KRNLOBJDIR= ${OBJTREE}${KRNLSRCDIR}
BUILDKERNELS=
INSTALLKERNEL=
.for _kernel in ${KERNCONF}
.if exists(${KRNLCONFDIR}/${_kernel})
BUILDKERNELS+= ${_kernel}
.if empty(INSTALLKERNEL)
INSTALLKERNEL= ${_kernel}
.endif
.endif
.endfor
#
# buildkernel
#
# Builds all kernels defined by BUILDKERNELS.
#
buildkernel:
.if empty(BUILDKERNELS)
@echo ">>> ERROR: Missing kernel configuration file(s) (${KERNCONF})."
@false
.endif
.if defined(KERNWARN)
@echo "--------------------------------------------------------------"
@echo ">>> WARNING: KERNEL= setting should be changed to KERNCONF="
@echo "--------------------------------------------------------------"
@sleep 3
.endif
@echo
.for _kernel in ${BUILDKERNELS}
@echo "--------------------------------------------------------------"
@echo ">>> Kernel build for ${_kernel} started on `LC_ALL=C date`"
@echo "--------------------------------------------------------------"
@echo "===> ${_kernel}"
mkdir -p ${KRNLOBJDIR}
.if !defined(NO_KERNELCONFIG)
cd ${KRNLCONFDIR}; \
PATH=${TMPPATH} \
config ${CONFIGARGS} -d ${KRNLOBJDIR}/${_kernel} ${_kernel}
.endif
.if !defined(NOCLEAN) && !defined(NO_KERNELCLEAN)
cd ${KRNLOBJDIR}/${_kernel}; \
${KMAKEENV} ${MAKE} KERNEL=${INSTKERNNAME} -DNO_MODULES clean
.if !defined(MODULES_WITH_WORLD) && !defined(NO_MODULES) && exists(${KRNLSRCDIR}/modules)
cd ${KRNLOBJDIR}/${_kernel}; \
${KMAKEENV} ${MAKE} KERNEL=${INSTKERNNAME} cleandir
.endif
.endif
cd ${KRNLOBJDIR}/${_kernel}; \
MAKESRCPATH=${KRNLSRCDIR}/dev/aic7xxx/aicasm \
${MAKE} -DBOOTSTRAPPING -f ${KRNLSRCDIR}/dev/aic7xxx/aicasm/Makefile
.if !defined(NO_KERNELDEPEND)
cd ${KRNLOBJDIR}/${_kernel}; \
${KMAKEENV} ${MAKE} KERNEL=${INSTKERNNAME} depend
.endif
cd ${KRNLOBJDIR}/${_kernel}; \
${KMAKEENV} ${MAKE} KERNEL=${INSTKERNNAME} all
@echo "--------------------------------------------------------------"
@echo ">>> Kernel build for ${_kernel} completed on `LC_ALL=C date`"
@echo "--------------------------------------------------------------"
.endfor
#
# installkernel
#
# Install the kernel defined by INSTALLKERNEL
#
installkernel reinstallkernel:
cd ${KRNLOBJDIR}/${INSTALLKERNEL}; \
${CROSSENV} ${MAKE} KERNEL=${INSTKERNNAME} ${.TARGET:S/kernel$//}
#
# update
#
# Update the source tree, by running sup and/or running cvs to update to the
# latest copy.
#
update:
.if defined(SUP_UPDATE)
@echo "--------------------------------------------------------------"
@echo ">>> Running ${SUP}"
@echo "--------------------------------------------------------------"
.if defined(SUPFILE)
@${SUP} ${SUPFLAGS} ${SUPFILE}
.endif
.if defined(SUPFILE1)
@${SUP} ${SUPFLAGS} ${SUPFILE1}
.endif
.if defined(SUPFILE2)
@${SUP} ${SUPFLAGS} ${SUPFILE2}
.endif
.if defined(PORTSSUPFILE) && !defined(NO_PORTSUPDATE)
@${SUP} ${SUPFLAGS} ${PORTSSUPFILE}
.endif
.if defined(DOCSUPFILE) && !defined(NO_DOCUPDATE)
@${SUP} ${SUPFLAGS} ${DOCSUPFILE}
.endif
.endif
.if defined(CVS_UPDATE)
@echo "--------------------------------------------------------------"
@echo ">>> Updating ${.CURDIR} from cvs repository" ${CVSROOT}
@echo "--------------------------------------------------------------"
cd ${.CURDIR}; cvs -q update -rRELENG_4 -P -d
.endif
#
# most
#
# Build most of the user binaries on the existing system libs and includes.
#
most:
@echo "--------------------------------------------------------------"
@echo ">>> Building programs only"
@echo "--------------------------------------------------------------"
.for _dir in bin sbin libexec usr.bin usr.sbin gnu/libexec gnu/usr.bin gnu/usr.sbin
cd ${.CURDIR}/${_dir}; ${MAKE} DIRPRFX=${_dir}/ all
.endfor
#
# installmost
#
# Install the binaries built by the 'most' target. This does not include
# libraries or include files.
#
installmost:
@echo "--------------------------------------------------------------"
@echo ">>> Installing programs only"
@echo "--------------------------------------------------------------"
.for _dir in bin sbin libexec usr.bin usr.sbin gnu/libexec gnu/usr.bin gnu/usr.sbin
cd ${.CURDIR}/${_dir}; ${MAKE} DIRPRFX=${_dir}/ install
.endfor
#
# ------------------------------------------------------------------------
#
# From here onwards are utility targets used by the 'make world' and
# related targets. If your 'world' breaks, you may like to try to fix
# the problem and manually run the following targets to attempt to
# complete the build. Beware, this is *not* guaranteed to work, you
# need to have a pretty good grip on the current state of the system
# to attempt to manually finish it. If in doubt, 'make world' again.
#
#
# bootstrap-tools: Build tools needed for compatibility
#
.if exists(${.CURDIR}/games) && !defined(NOGAMES)
_strfile= games/fortune/strfile
.endif
bootstrap-tools:
.for _tool in ${_strfile} usr.bin/yacc usr.bin/colldef usr.bin/xinstall \
usr.sbin/config \
gnu/usr.bin/gperf gnu/usr.bin/groff gnu/usr.bin/texinfo
cd ${.CURDIR}/${_tool}; \
${MAKE} DIRPRFX=${_tool}/ obj; \
${MAKE} DIRPRFX=${_tool}/ depend; \
${MAKE} DIRPRFX=${_tool}/ all; \
${MAKE} DIRPRFX=${_tool}/ DESTDIR=${MAKEOBJDIRPREFIX} install
.endfor
#
# build-tools: Build special purpose build tools
#
.if exists(${.CURDIR}/games) && !defined(NOGAMES)
_games= games/adventure games/hack games/phantasia
.endif
.if exists(${.CURDIR}/share) && !defined(NOSHARE)
_share= share/syscons/scrnmaps
.endif
.if !defined(NO_FORTRAN)
_fortran= gnu/usr.bin/cc/f771
.endif
.if !defined(NOPERL)
_perl= gnu/usr.bin/perl/miniperl
.endif
.if exists(${.CURDIR}/kerberosIV) && exists(${.CURDIR}/crypto) && \
!defined(NOCRYPT) && defined(MAKE_KERBEROS4)
_libroken4= kerberosIV/lib/libroken
.endif
.if exists(${.CURDIR}/kerberos5) && exists(${.CURDIR}/crypto) && \
!defined(NOCRYPT) && defined(MAKE_KERBEROS5)
_libkrb5= kerberos5/lib/libroken kerberos5/lib/libvers \
kerberos5/lib/libasn1 kerberos5/lib/libhdb kerberos5/lib/libsl
.endif
.if defined(RELEASEDIR)
_sysinstall= release/sysinstall
.endif
build-tools:
.for _tool in bin/csh bin/sh ${_games} gnu/usr.bin/cc/cc_tools ${_fortran} \
${_perl} ${_libroken4} ${_libkrb5} lib/libncurses ${_share} \
usr.bin/awk usr.bin/file ${_sysinstall}
cd ${.CURDIR}/${_tool}; ${MAKE} DIRPRFX=${_tool}/ build-tools
.endfor
#
# cross-tools: Build cross-building tools
#
.if ${TARGET_ARCH} == "alpha" && ${MACHINE_ARCH} != "alpha"
_elf2exe= usr.sbin/elf2exe
.endif
.if ${TARGET_ARCH} == "i386" && ${MACHINE_ARCH} != "i386"
_btxld= usr.sbin/btxld
.endif
cross-tools:
.for _tool in ${_btxld} ${_elf2exe} usr.bin/genassym usr.bin/gensetdefs \
gnu/usr.bin/binutils usr.bin/objformat usr.sbin/crunch/crunchide \
gnu/usr.bin/cc
cd ${.CURDIR}/${_tool}; \
${MAKE} DIRPRFX=${_tool}/ obj; \
${MAKE} DIRPRFX=${_tool}/ depend; \
${MAKE} DIRPRFX=${_tool}/ all; \
${MAKE} DIRPRFX=${_tool}/ DESTDIR=${MAKEOBJDIRPREFIX} install
.endfor
#
# hierarchy - ensure that all the needed directories are present
#
hierarchy:
cd ${.CURDIR}/etc; ${MAKE} distrib-dirs
#
# libraries - build all libraries, and install them under ${DESTDIR}.
#
# The list of libraries with dependents (${_prebuild_libs}) and their
# interdependencies (__L) are built automatically by the
# ${.CURDIR}/tools/make_libdeps.sh script.
#
libraries:
cd ${.CURDIR}; \
${MAKE} -f Makefile.inc1 _startup_libs; \
${MAKE} -f Makefile.inc1 _prebuild_libs; \
${MAKE} -f Makefile.inc1 _generic_libs;
# These dependencies are not automatically generated:
#
# gnu/lib/csu, gnu/lib/libgcc and lib/csu must be built before all
# shared libraries for ELF.
#
_startup_libs= gnu/lib/csu gnu/lib/libgcc
.if exists(${.CURDIR}/lib/csu/${MACHINE_ARCH}-${OBJFORMAT})
_startup_libs+= lib/csu/${MACHINE_ARCH}-${OBJFORMAT}
.else
_startup_libs+= lib/csu/${MACHINE_ARCH}
.endif
_prebuild_libs=
_generic_libs= gnu/lib
.if !defined(NOPERL)
_generic_libs+= gnu/usr.bin/perl/libperl
.endif
.if !defined(NOCRYPT) && defined(MAKE_KERBEROS5)
_prebuild_libs+= kerberos5/lib/libasn1
_prebuild_libs+= kerberos5/lib/libgssapi
_prebuild_libs+= kerberos5/lib/libkrb5
_prebuild_libs+= kerberos5/lib/libroken
_generic_libs+= kerberos5/lib
.endif
.if !defined(NOCRYPT) && defined(MAKE_KERBEROS4)
_prebuild_libs+= kerberosIV/lib/libkrb
kerberosIV/lib/libkrb__L: lib/libcrypt__L
_generic_libs+= kerberosIV/lib
.endif
_prebuild_libs+= lib/libcom_err lib/libcrypt lib/libmd \
lib/libncurses lib/libopie lib/libradius lib/libskey \
lib/libtacplus lib/libutil \
lib/libz lib/msun
lib/libopie__L lib/libradius__L lib/libtacplus__L: lib/libmd__L
lib/libskey__L: lib/libcrypt__L lib/libmd__L
_generic_libs+= lib
.if !defined(NOCRYPT) && !defined(NOSECURE)
.if !defined(NO_OPENSSL)
_prebuild_libs+= secure/lib/libcrypto
.if !defined(NO_OPENSSH)
_prebuild_libs+= secure/lib/libssh
secure/lib/libssh__L: secure/lib/libcrypto__L lib/libz__L
.endif
.endif
_generic_libs+= secure/lib
.endif
_generic_libs+= usr.bin/lex/lib
.if ${MACHINE_ARCH} == "i386"
_generic_libs+= usr.sbin/pcvt/keycap
.endif
.for _lib in ${_startup_libs} ${_prebuild_libs} ${_generic_libs}
${_lib}__L: .PHONY
.if exists(${.CURDIR}/${_lib})
cd ${.CURDIR}/${_lib}; \
${MAKE} DIRPRFX=${_lib}/ depend; \
${MAKE} DIRPRFX=${_lib}/ all; \
${MAKE} DIRPRFX=${_lib}/ install
.endif
.endfor
_startup_libs: ${_startup_libs:S/$/__L/}
_prebuild_libs: ${_prebuild_libs:S/$/__L/}
_generic_libs: ${_generic_libs:S/$/__L/}
.for __target in clean cleandepend cleandir depend includes obj
.for entry in ${SUBDIR}
${entry}.${__target}__D: .PHONY
@if test -d ${.CURDIR}/${entry}.${MACHINE_ARCH}; then \
${ECHODIR} "===> ${DIRPRFX}${entry}.${MACHINE_ARCH}"; \
edir=${entry}.${MACHINE_ARCH}; \
cd ${.CURDIR}/$${edir}; \
else \
${ECHODIR} "===> ${DIRPRFX}${entry}"; \
edir=${entry}; \
cd ${.CURDIR}/$${edir}; \
fi; \
${MAKE} ${__target} DIRPRFX=${DIRPRFX}$${edir}/
.endfor
par-${__target}: ${SUBDIR:S/$/.${__target}__D/}
.endfor
.include <bsd.subdir.mk>
![swh spinner](/static/img/swh-spinner.gif)
Computing file changes ...