Revision 5ee88057889bbca5f5bb96031b62b3756b33e164 authored by Linus Torvalds on 15 January 2021, 04:10:06 UTC, committed by Linus Torvalds on 15 January 2021, 04:10:06 UTC
Pull drm fixes from Dave Airlie: "Regular fixes for rc4, a bunch of fixes across i915, amdgpu and nouveau here, along with a couple of TTM fixes, and dma-buf and one core pageflip/modifier interaction fix. One notable i915 fix is a HSW GT1 regression fix that has been outstanding for quite a while. (Thanks to Matt Turner for kicking Intel into getting it fixed). dma-buf: - Fix a memory leak in CMAV heap core: - Fix format check for legacy pageflips ttm: - Pass correct address to dma_mapping_error() - Use mutex in pool shrinker i915: - Allow the sysadmin to override security mitigations - Restore clear-residual mitigations for ivb/byt - Limit VFE threads based on GT - GVT: fix vfio edid and full display detection - Fix DSI DSC power refcounting - Fix LPT CPU mode backlight takeover - Disable RPM wakeref assertions during driver shutdown - Fix DSI sequence sleeps amdgpu: - Update repo location in MAINTAINERS - Add some new renoir PCI IDs - Revert CRC UAPI changes - Revert OLED display fix which cases clocking problems for some systems - Misc vangogh fixes - GFX fix for sienna cichlid - DCN1.0 fix for pipe split - Fix incorrect PSP command amdkfd: - Fix possible out of bounds read in vcrat creation nouveau: - irq handling fix - expansion ROM fix - hw init dpcd disable - aux semaphore owner field fix - vram heap sizing fix - notifier at 0 is valid fix" * tag 'drm-fixes-2021-01-15' of git://anongit.freedesktop.org/drm/drm: (37 commits) drm/nouveau/kms/nv50-: fix case where notifier buffer is at offset 0 drm/nouveau/mmu: fix vram heap sizing drm/nouveau/i2c/gm200: increase width of aux semaphore owner fields drm/nouveau/i2c/gk110-: disable hw-initiated dpcd reads drm/nouveau/i2c/gk110: split out from i2c/gk104 drm/nouveau/privring: ack interrupts the same way as RM drm/nouveau/bios: fix issue shadowing expansion ROMs drm/amd/display: Fix to be able to stop crc calculation Revert "drm/amd/display: Expose new CRC window property" Revert "drm/amdgpu/disply: fix documentation warnings in display manager" Revert "drm/amd/display: Fix unused variable warning" drm/amdgpu: set power brake sequence drm/amdgpu: add new device id for Renior drm/amdgpu: add green_sardine device id (v2) drm/amdgpu: fix vram type and bandwidth error for DDR5 and DDR4 drm/amdgpu/gfx10: add updated GOLDEN_TSC_COUNT_UPPER/LOWER register offsets for VGH drm/amdkfd: Fix out-of-bounds read in kdf_create_vcrat_image_cpu() Revert "drm/amd/display: Fixed Intermittent blue screen on OLED panel" drm/amd/display: disable dcn10 pipe split by default drm/amd/display: Add a missing DCN3.01 API mapping ...
Kconfig
# SPDX-License-Identifier: GPL-2.0
#
# Configuration for initramfs
#
config INITRAMFS_SOURCE
string "Initramfs source file(s)"
default ""
help
This can be either a single cpio archive with a .cpio suffix or a
space-separated list of directories and files for building the
initramfs image. A cpio archive should contain a filesystem archive
to be used as an initramfs image. Directories should contain a
filesystem layout to be included in the initramfs image. Files
should contain entries according to the format described by the
"usr/gen_init_cpio" program in the kernel tree.
When multiple directories and files are specified then the
initramfs image will be the aggregate of all of them.
See <file:Documentation/driver-api/early-userspace/early_userspace_support.rst> for more details.
If you are not sure, leave it blank.
config INITRAMFS_FORCE
bool "Ignore the initramfs passed by the bootloader"
depends on CMDLINE_EXTEND || CMDLINE_FORCE
help
This option causes the kernel to ignore the initramfs image
(or initrd image) passed to it by the bootloader. This is
analogous to CMDLINE_FORCE, which is found on some architectures,
and is useful if you cannot or don't want to change the image
your bootloader passes to the kernel.
config INITRAMFS_ROOT_UID
int "User ID to map to 0 (user root)"
depends on INITRAMFS_SOURCE!=""
default "0"
help
If INITRAMFS_SOURCE points to a directory, files owned by this UID
(-1 = current user) will be owned by root in the resulting image.
If you are not sure, leave it set to "0".
config INITRAMFS_ROOT_GID
int "Group ID to map to 0 (group root)"
depends on INITRAMFS_SOURCE!=""
default "0"
help
If INITRAMFS_SOURCE points to a directory, files owned by this GID
(-1 = current group) will be owned by root in the resulting image.
If you are not sure, leave it set to "0".
config RD_GZIP
bool "Support initial ramdisk/ramfs compressed using gzip"
default y
select DECOMPRESS_GZIP
help
Support loading of a gzip encoded initial ramdisk or cpio buffer.
If unsure, say Y.
config RD_BZIP2
bool "Support initial ramdisk/ramfs compressed using bzip2"
default y
select DECOMPRESS_BZIP2
help
Support loading of a bzip2 encoded initial ramdisk or cpio buffer
If unsure, say N.
config RD_LZMA
bool "Support initial ramdisk/ramfs compressed using LZMA"
default y
select DECOMPRESS_LZMA
help
Support loading of a LZMA encoded initial ramdisk or cpio buffer
If unsure, say N.
config RD_XZ
bool "Support initial ramdisk/ramfs compressed using XZ"
default y
select DECOMPRESS_XZ
help
Support loading of a XZ encoded initial ramdisk or cpio buffer.
If unsure, say N.
config RD_LZO
bool "Support initial ramdisk/ramfs compressed using LZO"
default y
select DECOMPRESS_LZO
help
Support loading of a LZO encoded initial ramdisk or cpio buffer
If unsure, say N.
config RD_LZ4
bool "Support initial ramdisk/ramfs compressed using LZ4"
default y
select DECOMPRESS_LZ4
help
Support loading of a LZ4 encoded initial ramdisk or cpio buffer
If unsure, say N.
config RD_ZSTD
bool "Support initial ramdisk/ramfs compressed using ZSTD"
default y
depends on BLK_DEV_INITRD
select DECOMPRESS_ZSTD
help
Support loading of a ZSTD encoded initial ramdisk or cpio buffer.
If unsure, say N.
choice
prompt "Built-in initramfs compression mode"
depends on INITRAMFS_SOURCE != ""
help
This option allows you to decide by which algorithm the builtin
initramfs will be compressed. Several compression algorithms are
available, which differ in efficiency, compression and
decompression speed. Compression speed is only relevant
when building a kernel. Decompression speed is relevant at
each boot. Also the memory usage during decompression may become
relevant on memory constrained systems. This is usually based on the
dictionary size of the algorithm with algorithms like XZ and LZMA
featuring large dictionary sizes.
High compression options are mostly useful for users who are
low on RAM, since it reduces the memory consumption during
boot.
Keep in mind that your build system needs to provide the appropriate
compression tool to compress the generated initram cpio file for
embedding.
If in doubt, select 'None'
config INITRAMFS_COMPRESSION_GZIP
bool "Gzip"
depends on RD_GZIP
help
Use the old and well tested gzip compression algorithm. Gzip provides
a good balance between compression ratio and decompression speed and
has a reasonable compression speed. It is also more likely to be
supported by your build system as the gzip tool is present by default
on most distros.
config INITRAMFS_COMPRESSION_BZIP2
bool "Bzip2"
depends on RD_BZIP2
help
It's compression ratio and speed is intermediate. Decompression speed
is slowest among the choices. The initramfs size is about 10% smaller
with bzip2, in comparison to gzip. Bzip2 uses a large amount of
memory. For modern kernels you will need at least 8MB RAM or more for
booting.
If you choose this, keep in mind that you need to have the bzip2 tool
available to be able to compress the initram.
config INITRAMFS_COMPRESSION_LZMA
bool "LZMA"
depends on RD_LZMA
help
This algorithm's compression ratio is best but has a large dictionary
size which might cause issues in memory constrained systems.
Decompression speed is between the other choices. Compression is
slowest. The initramfs size is about 33% smaller with LZMA in
comparison to gzip.
If you choose this, keep in mind that you may need to install the xz
or lzma tools to be able to compress the initram.
config INITRAMFS_COMPRESSION_XZ
bool "XZ"
depends on RD_XZ
help
XZ uses the LZMA2 algorithm and has a large dictionary which may cause
problems on memory constrained systems. The initramfs size is about
30% smaller with XZ in comparison to gzip. Decompression speed is
better than that of bzip2 but worse than gzip and LZO. Compression is
slow.
If you choose this, keep in mind that you may need to install the xz
tool to be able to compress the initram.
config INITRAMFS_COMPRESSION_LZO
bool "LZO"
depends on RD_LZO
help
It's compression ratio is the second poorest amongst the choices. The
kernel size is about 10% bigger than gzip. Despite that, it's
decompression speed is the second fastest and it's compression speed
is quite fast too.
If you choose this, keep in mind that you may need to install the lzop
tool to be able to compress the initram.
config INITRAMFS_COMPRESSION_LZ4
bool "LZ4"
depends on RD_LZ4
help
It's compression ratio is the poorest amongst the choices. The kernel
size is about 15% bigger than gzip; however its decompression speed
is the fastest.
If you choose this, keep in mind that most distros don't provide lz4
by default which could cause a build failure.
config INITRAMFS_COMPRESSION_ZSTD
bool "ZSTD"
depends on RD_ZSTD
help
ZSTD is a compression algorithm targeting intermediate compression
with fast decompression speed. It will compress better than GZIP and
decompress around the same speed as LZO, but slower than LZ4.
If you choose this, keep in mind that you may need to install the zstd
tool to be able to compress the initram.
config INITRAMFS_COMPRESSION_NONE
bool "None"
help
Do not compress the built-in initramfs at all. This may sound wasteful
in space, but, you should be aware that the built-in initramfs will be
compressed at a later stage anyways along with the rest of the kernel,
on those architectures that support this. However, not compressing the
initramfs may lead to slightly higher memory consumption during a
short time at boot, while both the cpio image and the unpacked
filesystem image will be present in memory simultaneously
endchoice
![swh spinner](/static/img/swh-spinner.gif)
Computing file changes ...