Revision 5f38ecb5e1f4ef9a6cd70970703557a4ffddf54c authored by Eh Tan on 20 November 2009, 21:58:43 UTC, committed by Eh Tan on 20 November 2009, 21:58:43 UTC
1 parent aca8438
global_defs.h
/*
*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
*
*<LicenseText>
*
* CitcomS by Louis Moresi, Shijie Zhong, Lijie Han, Eh Tan,
* Clint Conrad, Michael Gurnis, and Eun-seo Choi.
* Copyright (C) 1994-2005, California Institute of Technology.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*
*</LicenseText>
*
*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
*/
#if !defined(CitcomS_global_defs_h)
#define CitcomS_global_defs_h
/*
This file contains the definitions of variables which are passed as arguments
to functions across the whole filespace of CITCOM.
#include this file everywhere !
*/
#ifdef USE_GGRD
#include "hc.h"
#endif
#include <assert.h>
#include <stdio.h>
#include <stdlib.h>
#include "mpi.h"
#ifdef USE_HDF5
#include "hdf5.h"
#endif
#ifdef __cplusplus
extern "C" {
#else
/* Macros */
#define max(A,B) (((A) > (B)) ? (A) : (B))
#define min(A,B) (((A) < (B)) ? (A) : (B))
#define SWAP(a,b) {temp=(a);(a)=(b);(b)=temp;}
#endif
#define LIDN 0x1
#define VBX 0x2
#define VBZ 0x4
#define VBY 0x8
#define TBX 0x10
#define TBZ 0x20
#define TBY 0x40
#define TZEDGE 0x80
#define TXEDGE 0x100
#define TYEDGE 0x200
#define VXEDGE 0x400
#define VZEDGE 0x800
#define VYEDGE 0x1000
#define INTX 0x2000
#define INTZ 0x4000
#define INTY 0x8000
#define SBX 0x10000
#define SBZ 0x20000
#define SBY 0x40000
#define FBX 0x80000
#define FBZ 0x100000
#define FBY 0x200000
#define OFFSIDE 0x400000
#define PMARGINS 0x800000
#define SSLAB 0x400000
#define SKIP 0x1000000
#define SKIPS 0x2000000
#define SKIPID 0x4000000
#define ZEROID 0x8000000
#ifndef COMPRESS_BINARY
#define COMPRESS_BINARY "/usr/bin/compress"
#endif
#define MAX_LEVELS 12 /* max. number of multigrid levels */
#define NCS 14 /* max. number of sphere caps */
/* type of elt_del and elt_c arrays */
/* double precision doesn't help,
* probably due to the coordinate transformation c33matrix */
#if 1
typedef float higher_precision;
#else
typedef double higher_precision;
#endif
/* Common structures */
struct Bdry {
int nel;
int *element[NCS];
int *normal[NCS][4];
double *det[NCS][7][5];
};
struct SBC {
/* stress (traction) boundary conditions */
int *node[NCS];
double *SB[NCS][7][4];
};
struct Shape_function_dA {
double vpt[8+1];
double ppt[1+1]; };
struct Shape_function1_dA {
double vpt[6*4];
double ppt[6*1]; };
struct Shape_function_side_dA {
double vpt[4];
double ppt[1]; };
struct Shape_function1 {
double vpt[4*4]; /* node & gauss pt */
double ppt[4*1]; };
struct Shape_function {
double vpt[8*8]; /* node & gauss pt */
double ppt[8*1]; };
struct Shape_function_dx {
double vpt[3*8*8]; /* dirn & node & gauss pt */
double ppt[3*8*1]; };
struct Shape_function1_dx {
double vpt[2*4*4]; /* dirn & node & gauss pt */
double ppt[2*4*1]; };
struct CC {
double vpt[3*3*8*8];
double ppt[3*3*8*1]; }; /* dirn & node & gauss pt */
struct CCX {
double vpt[3*3*2*8*8];
double ppt[3*3*2*8*1]; }; /* dirn & node & gauss pt */
struct EG {
higher_precision g[24][1]; };
struct EC {
higher_precision c[24][1]; };
struct EK {
double k[24*24]; };
struct COORD {
float centre[4];
float size[4];
float area; } ;
struct SUBEL {
int sub[9]; };
struct ID {
int doff[4]; }; /* can be 1 or 2 or 3 */
struct IEN {
int node[9]; };
struct FNODE {
float node[9]; };
struct SIEN {
int node[5]; };
struct BOUND {
int bound[8]; };
struct PASS {
int pass[27]; };
struct Parallel {
MPI_Comm world;
MPI_Comm horizontal_comm;
MPI_Comm vertical_comm;
int me;
int nproc;
int nprocx;
int nprocz;
int nprocy;
int nprocxy;
int nproczy;
int nprocxz;
int total_surf_proc;
int ****loc2proc_map;
int redundant[MAX_LEVELS];
int idb;
int me_loc[4];
int num_b;
int Skip_neq[MAX_LEVELS][NCS];
int *Skip_id[MAX_LEVELS][NCS];
int TNUM_PASS[MAX_LEVELS][NCS];
struct BOUND *NODE[MAX_LEVELS][NCS];
struct BOUND NUM_NNO[MAX_LEVELS][NCS];
struct BOUND NUM_PASS[MAX_LEVELS][NCS];
struct PASS NUM_NEQ[MAX_LEVELS][NCS];
struct PASS NUM_NODE[MAX_LEVELS][NCS];
struct PASS PROCESSOR[MAX_LEVELS][NCS];
struct PASS *EXCHANGE_ID[MAX_LEVELS][NCS];
struct PASS *EXCHANGE_NODE[MAX_LEVELS][NCS];
int TNUM_PASSz[MAX_LEVELS];
struct BOUND NUM_PASSz[MAX_LEVELS];
struct PASS PROCESSORz[MAX_LEVELS];
struct PASS NUM_NEQz[MAX_LEVELS];
struct PASS NUM_NODEz[MAX_LEVELS];
int sTNUM_PASS[MAX_LEVELS][NCS];
struct PASS NUM_sNODE[MAX_LEVELS][NCS];
struct PASS sPROCESSOR[MAX_LEVELS][NCS];
struct PASS *EXCHANGE_sNODE[MAX_LEVELS][NCS];
};
struct CAP {
double theta[5];
double fi [5];
float *TB[4];
float *VB[4];
float *V[4];
float *Vprev[4];
};
struct SPHERE {
int caps;
int caps_per_proc;
int capid[NCS];
int max_connections;
int *hindex[100];
int hindice;
float *harm_geoid[2];
float *harm_geoid_from_bncy[2];
float *harm_geoid_from_bncy_botm[2];
float *harm_geoid_from_tpgt[2];
float *harm_geoid_from_tpgb[2];
float *harm_tpgt[2];
float *harm_tpgb[2];
double **tablesplm[NCS];
double **tablescosf[NCS];
double **tablessinf[NCS];
double area[NCS];
double angle[NCS][5];
double *area1[MAX_LEVELS][NCS];
double *angle1[MAX_LEVELS][NCS][5];
double *R[MAX_LEVELS];
double *gr;
double ro,ri;
struct CAP cap[NCS];
};
struct MESH_DATA {/* general information concerning the fe mesh */
int nsd; /* Spatial extent 1,2,3d*/
int dof; /* degrees of freedom per node */
int levmax;
int levmin;
int gridmax;
int gridmin;
int levels;
int mgunitx;
int mgunitz;
int mgunity;
int NEQ[MAX_LEVELS];
int NNO[MAX_LEVELS];
int NNOV[MAX_LEVELS];
int NPNO[MAX_LEVELS];
int NEL[MAX_LEVELS];
int NOX[MAX_LEVELS];
int NOZ[MAX_LEVELS];
int NOY[MAX_LEVELS];
int ELX[MAX_LEVELS];
int ELZ[MAX_LEVELS];
int ELY[MAX_LEVELS];
int SNEL[MAX_LEVELS];
int neq;
int nno;
int nnov;
int npno;
int nel;
int snel;
int elx;
int elz;
int ely;
int nox;
int noz;
int noy;
int exs;
int ezs;
int eys;
int nxs;
int nzs;
int nys;
int EXS[MAX_LEVELS];
int EYS[MAX_LEVELS];
int EZS[MAX_LEVELS];
int NXS[MAX_LEVELS];
int NYS[MAX_LEVELS];
int NZS[MAX_LEVELS];
int nsf; /* nodes for surface observables */
int toptbc;
int bottbc;
int topvbc;
int botvbc;
int sidevbc;
int periodic_x;
int periodic_y;
float layer[4]; /* dimensionless dimensions */
double volume;
int matrix_size[MAX_LEVELS];
} ;
struct HAVE { /* horizontal averages */
float *T;
float *V[4];
float **C;
};
struct SLICE { /* horizontally sliced data, including topography */
float *tpg[NCS];
float *tpgb[NCS];
float *shflux[NCS];
float *bhflux[NCS];
float *divg[NCS];
float *vort[NCS];
float *freesurf[NCS];
};
struct MONITOR {
int solution_cycles;
int solution_cycles_init;
int stop_topo_loop;
int topo_loop;
double momentum_residual;
double incompressibility;
double fdotf;
double vdotv;
double pdotp;
double cpu_time_at_start;
double cpu_time_at_last_cycle;
float elapsed_time;
float T_interior;
float T_maxvaried;
float T_interior_max_for_exit;
};
struct CONTROL {
int PID;
char data_prefix[50];
char data_prefix_old[50];
char data_dir[150];
char data_dir_old[150];
char data_file[200];
char old_P_file[200];
char PROBLEM_TYPE[20]; /* one of ... */
int CONVECTION;
int stokes;
int restart;
int post_p;
char GEOMETRY[20]; /* one of ... */
int CART2D;
int CART2pt5D;
int CART3D;
int AXI;
char SOLVER_TYPE[20]; /* one of ... */
int CONJ_GRAD;
int NMULTIGRID;
int pseudo_free_surf;
int tracer;
int tracer_enriched;
double theta_min, theta_max, fi_min, fi_max;
float start_age;
int reset_startage;
int zero_elapsed_time;
float Ra_670,clapeyron670,transT670,inv_width670;
float Ra_410,clapeyron410,transT410,inv_width410;
float Ra_cmb,clapeyroncmb,transTcmb,inv_widthcmb;
int augmented_Lagr;
double augmented;
int NASSEMBLE;
float sob_tolerance;
/* Rayleigh # */
float Atemp;
/* Dissipation # */
float disptn_number;
/* inverse of Gruneisen parameter */
float inv_gruneisen;
/* surface temperature */
float surface_temp;
/* adiabatic temperature extrapolated to the surface */
/* float adiabaticT0; */
/**/
int compress_iter_maxstep;
int self_gravitation; /* self gravitation */
int use_cbf_topo; /* use consistent dynamic topo method? */
char uzawa[20];
float inputdiff;
float VBXtopval;
float VBXbotval;
float VBYtopval;
float VBYbotval;
int coor;
float coor_refine[4];
float rrlayer[20];
int nrlayer[20],rlayers;
char coor_file[100];
//int remove_hor_buoy_avg;
float mantle_temp;
int lith_age;
int lith_age_time;
int lith_age_old_cycles;
float lith_age_depth;
int precise_strain_rate; /* use proper computation for strain-rates in whole domain, not just poles */
int temperature_bound_adj;
float depth_bound_adj;
float width_bound_adj;
float TBCtopval;
float TBCbotval;
float Q0;
float Q0ER;
int precondition;
int keep_going;
int v_steps_low;
int v_steps_high;
int v_steps_upper;
int p_iterations;
int mg_cycle;
int max_mg_cycles;
int down_heavy;
int up_heavy;
int verbose;
int remove_rigid_rotation;
int remove_angular_momentum;
int side_sbcs;
int vbcs_file;
int tbcs_file;
int mat_control;
int mineral_physics_model;
#ifdef USE_GGRD
struct ggrd_master ggrd;
float *surface_rayleigh;
int ggrd_allow_mixed_vbcs;
float ggrd_vtop_omega[4];
#endif
double accuracy;
int only_check_vel_convergence;
char velocity_boundary_file[1000];
char temperature_boundary_file[1000];
char mat_file[1000];
char lith_age_file[1000];
int total_iteration_cycles;
int total_v_solver_calls;
int checkpoint_frequency;
int record_every;
int record_all_until;
int print_convergence;
int sdepv_print_convergence;
};
struct REF_STATE {
int choice;
char filename[200];
double *rho;
double *thermal_expansivity;
double *heat_capacity;
/*double *thermal_conductivity;*/
double *gravity;
/*double *Tadi;*/
};
struct DATA {
float layer_km;
float radius_km;
float grav_acc;
float therm_exp;
float Cp;
float therm_diff;
#ifdef ALLOW_ELLIPTICAL
double ellipticity, ra,rc,rotm,j2,ge,efac; /* for ellipticity tests: f, normalized a and c axes,
rotational fraction m, J2, and norm gravity at the equator */
int use_ellipse,use_rotation_g;
#endif
float therm_cond;
float density;
float res_density;
float res_density_X;
float melt_density;
float density_above;
float density_below;
float gas_const;
float surf_heat_flux;
float ref_viscosity;
float melt_viscosity;
float permeability;
float grav_const;
float youngs_mod;
float Te;
float ref_temperature;
float Tsurf;
float T_sol0;
float delta_S;
float dTsol_dz;
float dTsol_dF;
float dT_dz;
float scalet;
float scalev;
float timedir;
};
/* for gzdir */
struct gzd_struc{
int vtk_io,vtk_base_init,vtk_base_save,
vtk_ocount;
float *vtk_base;
FILE *vtk_fp;
int rnr; /* remove net rotation? */
};
struct Output {
char format[20]; /* ascii or hdf5 */
char optional[1000]; /* comma-delimited list of objects to output */
int llmax; /* max degree of spherical harmonics output */
/* size of collective buffer used by MPI-IO */
int cb_block_size;
int cb_buffer_size;
/* size of data sieve buffer used by HDF5 */
int sieve_buf_size;
/* memory alignment used by HDF5 */
int alignment;
int alignment_threshold;
/* cache for chunked dataset used by HDF5 */
int cache_mdc_nelmts;
int cache_rdcc_nelmts;
int cache_rdcc_nbytes;
int connectivity; /* whether to output connectivity */
int stress; /* whether to output stress */
int pressure; /* whether to output pressure */
int surf; /* whether to output surface data */
int botm; /* whether to output bottom data */
int geoid; /* whether to output geoid/topo spherial harmonics */
int horiz_avg; /* whether to output horizontal averaged profile */
int seismic; /* whether to output seismic velocity model */
int coord_bin; /* whether to output coordinates in binary format */
int tracer; /* whether to output tracer coordinate */
int comp_el; /* whether to output composition at elements */
int comp_nd; /* whether to output composition at nodes */
int heating; /* whether to output heating terms at elements */
/* flags used by GZDIR */
struct gzd_struc gzdir;
int write_q_files;
FILE *fpqt,*fpqb; /* additional heat flux output */
};
struct COMPOSITION {
int ichemical_buoyancy;
int icompositional_rheology;
/* if any of the above flags is true, turn this flag on */
int on;
int ibuoy_type;
int ncomp;
double *buoyancy_ratio;
double **comp_el[13];
double **comp_node[13];
double *initial_bulk_composition;
double *bulk_composition;
double *error_fraction;
double compositional_rheology_prefactor;
};
struct CITCOM_GNOMONIC {
/* gnomonic projected coordinate */
double u;
double v;
};
#ifdef USE_HDF5
#include "hdf5_related.h"
#endif
#include "tracer_defs.h"
struct All_variables {
#include "solver.h"
#include "convection_variables.h"
#include "viscosity_descriptions.h"
#include "advection.h"
FILE *fp;
FILE *fptime;
FILE *fp_out;
#ifdef USE_HDF5
struct HDF5_INFO hdf5;
#endif
struct HAVE Have;
struct MESH_DATA mesh;
struct MESH_DATA lmesh;
struct CONTROL control;
struct MONITOR monitor;
struct DATA data;
struct SLICE slice;
struct Parallel parallel;
struct SPHERE sphere;
struct Bdry boundary;
struct SBC sbc;
struct Output output;
struct TRACE trace;
/* for chemical convection & composition rheology */
struct COMPOSITION composition;
struct CITCOM_GNOMONIC *gnomonic;
double gnomonic_reference_phi;
struct COORD *eco[NCS];
struct IEN *ien[NCS]; /* global */
struct SIEN *sien[NCS];
struct ID *id[NCS];
struct COORD *ECO[MAX_LEVELS][NCS];
struct IEN *IEN[MAX_LEVELS][NCS]; /* global at each level */
struct FNODE *TWW[MAX_LEVELS][NCS]; /* for nodal averages */
struct ID *ID[MAX_LEVELS][NCS];
struct SUBEL *EL[MAX_LEVELS][NCS];
struct EG *elt_del[MAX_LEVELS][NCS];
struct EC *elt_c[MAX_LEVELS][NCS];
struct EK *elt_k[MAX_LEVELS][NCS];
struct CC *cc[NCS];
struct CCX *ccx[NCS];
struct CC *CC[MAX_LEVELS][NCS];
struct CCX *CCX[MAX_LEVELS][NCS];
struct CC element_Cc;
struct CCX element_Ccx;
struct REF_STATE refstate;
higher_precision *Eqn_k1[MAX_LEVELS][NCS],*Eqn_k2[MAX_LEVELS][NCS],*Eqn_k3[MAX_LEVELS][NCS];
int *Node_map [MAX_LEVELS][NCS];
double *BI[MAX_LEVELS][NCS],*BPI[MAX_LEVELS][NCS];
double *rho;
double *heating_adi[NCS];
double *heating_visc[NCS];
double *heating_latent[NCS];
double *P[NCS],*F[NCS],*U[NCS];
double *T[NCS],*Tdot[NCS],*buoyancy[NCS];
double *u1[NCS];
double *temp[NCS],*temp1[NCS];
double *Mass[NCS], *MASS[MAX_LEVELS][NCS];
double *TMass[NCS], *NMass[NCS];
double *SX[MAX_LEVELS][NCS][4],*X[MAX_LEVELS][NCS][4];
double *sx[NCS][4],*x[NCS][4];
double *surf_det[NCS][5];
double *SinCos[MAX_LEVELS][NCS][4];
float *NP[NCS];
//float *stress[NCS];
float *gstress[NCS];
float *Fas670[NCS],*Fas410[NCS],*Fas670_b[NCS],*Fas410_b[NCS];
float *Fascmb[NCS],*Fascmb_b[NCS];
float *Vi[NCS],*EVi[NCS];
float *VI[MAX_LEVELS][NCS],*EVI[MAX_LEVELS][NCS];
int num_zero_resid[MAX_LEVELS][NCS];
int *zero_resid[MAX_LEVELS][NCS];
int *surf_element[NCS],*surf_node[NCS];
int *mat[NCS];
float *VIP[NCS];
unsigned int *NODE[MAX_LEVELS][NCS];
unsigned int *node[NCS];
float *age_t;
struct Shape_function_dx *GNX[MAX_LEVELS][NCS];
struct Shape_function_dA *GDA[MAX_LEVELS][NCS];
struct Shape_function_dx *gNX[NCS];
struct Shape_function_dA *gDA[NCS];
struct Shape_function1 M; /* master-element shape funtions */
struct Shape_function1_dx Mx;
struct Shape_function N;
struct Shape_function NM;
struct Shape_function_dx Nx;
struct Shape_function1 L; /* master-element shape funtions */
struct Shape_function1_dx Lx;
struct Shape_function_dx NMx;
void (* build_forcing_term)(void*);
void (* iterative_solver)(void*);
void (* next_buoyancy_field)(void*);
void (* next_buoyancy_field_init)(void*);
void (* obtain_gravity)(void*);
void (* problem_settings)(void*);
void (* problem_derived_values)(void*);
void (* problem_allocate_vars)(void*);
void (* problem_boundary_conds)(void*);
void (* problem_update_node_positions)(void*);
void (* problem_initial_fields)(void*);
void (* problem_tracer_setup)(void*);
void (* problem_tracer_output)(void*, int);
void (* problem_update_bcs)(void*);
void (* special_process_new_velocity)(void*);
void (* special_process_new_buoyancy)(void*);
void (* solve_stokes_problem)(void*);
void (* solver_allocate_vars)(void*);
void (* transform)(void*);
float (* node_space_function[3])(void*);
/* function pointer for choosing between various output routines */
void (* problem_output)(struct All_variables *, int);
/* the following function pointers are for exchanger */
void (* exchange_node_d)(struct All_variables *, double**, int);
void (* exchange_node_f)(struct All_variables *, float**, int);
void (* temperatures_conform_bcs)(void*);
};
#ifdef __cplusplus
}
#endif
#endif
![swh spinner](/static/img/swh-spinner.gif)
Computing file changes ...