Revision 5f4fc6d440d77a2cf74fe4ea56955674ac7e35e7 authored by Linus Torvalds on 19 July 2019, 17:06:06 UTC, committed by Linus Torvalds on 19 July 2019, 17:06:06 UTC
Pull networking fixes from David Miller: 1) Fix AF_XDP cq entry leak, from Ilya Maximets. 2) Fix handling of PHY power-down on RTL8411B, from Heiner Kallweit. 3) Add some new PCI IDs to iwlwifi, from Ihab Zhaika. 4) Fix handling of neigh timers wrt. entries added by userspace, from Lorenzo Bianconi. 5) Various cases of missing of_node_put(), from Nishka Dasgupta. 6) The new NET_ACT_CT needs to depend upon NF_NAT, from Yue Haibing. 7) Various RDS layer fixes, from Gerd Rausch. 8) Fix some more fallout from TCQ_F_CAN_BYPASS generalization, from Cong Wang. 9) Fix FIB source validation checks over loopback, also from Cong Wang. 10) Use promisc for unsupported number of filters, from Justin Chen. 11) Missing sibling route unlink on failure in ipv6, from Ido Schimmel. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (90 commits) tcp: fix tcp_set_congestion_control() use from bpf hook ag71xx: fix return value check in ag71xx_probe() ag71xx: fix error return code in ag71xx_probe() usb: qmi_wwan: add D-Link DWM-222 A2 device ID bnxt_en: Fix VNIC accounting when enabling aRFS on 57500 chips. net: dsa: sja1105: Fix missing unlock on error in sk_buff() gve: replace kfree with kvfree selftests/bpf: fix test_xdp_noinline on s390 selftests/bpf: fix "valid read map access into a read-only array 1" on s390 net/mlx5: Replace kfree with kvfree MAINTAINERS: update netsec driver ipv6: Unlink sibling route in case of failure liquidio: Replace vmalloc + memset with vzalloc udp: Fix typo in net/ipv4/udp.c net: bcmgenet: use promisc for unsupported filters ipv6: rt6_check should return NULL if 'from' is NULL tipc: initialize 'validated' field of received packets selftests: add a test case for rp_filter fib: relax source validation check for loopback packets mlxsw: spectrum: Do not process learned records with a dummy FID ...
Kconfig.kgdb
# SPDX-License-Identifier: GPL-2.0-only
config HAVE_ARCH_KGDB
bool
menuconfig KGDB
bool "KGDB: kernel debugger"
depends on HAVE_ARCH_KGDB
depends on DEBUG_KERNEL
help
If you say Y here, it will be possible to remotely debug the
kernel using gdb. It is recommended but not required, that
you also turn on the kernel config option
CONFIG_FRAME_POINTER to aid in producing more reliable stack
backtraces in the external debugger. Documentation of
kernel debugger is available at http://kgdb.sourceforge.net
as well as in Documentation/dev-tools/kgdb.rst. If
unsure, say N.
if KGDB
config KGDB_SERIAL_CONSOLE
tristate "KGDB: use kgdb over the serial console"
select CONSOLE_POLL
select MAGIC_SYSRQ
depends on TTY && HW_CONSOLE
default y
help
Share a serial console with kgdb. Sysrq-g must be used
to break in initially.
config KGDB_TESTS
bool "KGDB: internal test suite"
default n
help
This is a kgdb I/O module specifically designed to test
kgdb's internal functions. This kgdb I/O module is
intended to for the development of new kgdb stubs
as well as regression testing the kgdb internals.
See the drivers/misc/kgdbts.c for the details about
the tests. The most basic of this I/O module is to boot
a kernel boot arguments "kgdbwait kgdbts=V1F100"
config KGDB_TESTS_ON_BOOT
bool "KGDB: Run tests on boot"
depends on KGDB_TESTS
default n
help
Run the kgdb tests on boot up automatically without the need
to pass in a kernel parameter
config KGDB_TESTS_BOOT_STRING
string "KGDB: which internal kgdb tests to run"
depends on KGDB_TESTS_ON_BOOT
default "V1F100"
help
This is the command string to send the kgdb test suite on
boot. See the drivers/misc/kgdbts.c for detailed
information about other strings you could use beyond the
default of V1F100.
config KGDB_LOW_LEVEL_TRAP
bool "KGDB: Allow debugging with traps in notifiers"
depends on X86 || MIPS
default n
help
This will add an extra call back to kgdb for the breakpoint
exception handler which will allow kgdb to step through a
notify handler.
config KGDB_KDB
bool "KGDB_KDB: include kdb frontend for kgdb"
default n
help
KDB frontend for kernel
config KDB_DEFAULT_ENABLE
hex "KDB: Select kdb command functions to be enabled by default"
depends on KGDB_KDB
default 0x1
help
Specifiers which kdb commands are enabled by default. This may
be set to 1 or 0 to enable all commands or disable almost all
commands.
Alternatively the following bitmask applies:
0x0002 - allow arbitrary reads from memory and symbol lookup
0x0004 - allow arbitrary writes to memory
0x0008 - allow current register state to be inspected
0x0010 - allow current register state to be modified
0x0020 - allow passive inspection (backtrace, process list, lsmod)
0x0040 - allow flow control management (breakpoint, single step)
0x0080 - enable signalling of processes
0x0100 - allow machine to be rebooted
The config option merely sets the default at boot time. Both
issuing 'echo X > /sys/module/kdb/parameters/cmd_enable' or
setting with kdb.cmd_enable=X kernel command line option will
override the default settings.
config KDB_KEYBOARD
bool "KGDB_KDB: keyboard as input device"
depends on VT && KGDB_KDB
default n
help
KDB can use a PS/2 type keyboard for an input device
config KDB_CONTINUE_CATASTROPHIC
int "KDB: continue after catastrophic errors"
depends on KGDB_KDB
default "0"
help
This integer controls the behaviour of kdb when the kernel gets a
catastrophic error, i.e. for a panic or oops.
When KDB is active and a catastrophic error occurs, nothing extra
will happen until you type 'go'.
CONFIG_KDB_CONTINUE_CATASTROPHIC == 0 (default). The first time
you type 'go', you will be warned by kdb. The secend time you type
'go', KDB tries to continue. No guarantees that the
kernel is still usable in this situation.
CONFIG_KDB_CONTINUE_CATASTROPHIC == 1. KDB tries to continue.
No guarantees that the kernel is still usable in this situation.
CONFIG_KDB_CONTINUE_CATASTROPHIC == 2. KDB forces a reboot.
If you are not sure, say 0.
endif # KGDB
![swh spinner](/static/img/swh-spinner.gif)
Computing file changes ...