Revision 5f4fc6d440d77a2cf74fe4ea56955674ac7e35e7 authored by Linus Torvalds on 19 July 2019, 17:06:06 UTC, committed by Linus Torvalds on 19 July 2019, 17:06:06 UTC
Pull networking fixes from David Miller: 1) Fix AF_XDP cq entry leak, from Ilya Maximets. 2) Fix handling of PHY power-down on RTL8411B, from Heiner Kallweit. 3) Add some new PCI IDs to iwlwifi, from Ihab Zhaika. 4) Fix handling of neigh timers wrt. entries added by userspace, from Lorenzo Bianconi. 5) Various cases of missing of_node_put(), from Nishka Dasgupta. 6) The new NET_ACT_CT needs to depend upon NF_NAT, from Yue Haibing. 7) Various RDS layer fixes, from Gerd Rausch. 8) Fix some more fallout from TCQ_F_CAN_BYPASS generalization, from Cong Wang. 9) Fix FIB source validation checks over loopback, also from Cong Wang. 10) Use promisc for unsupported number of filters, from Justin Chen. 11) Missing sibling route unlink on failure in ipv6, from Ido Schimmel. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (90 commits) tcp: fix tcp_set_congestion_control() use from bpf hook ag71xx: fix return value check in ag71xx_probe() ag71xx: fix error return code in ag71xx_probe() usb: qmi_wwan: add D-Link DWM-222 A2 device ID bnxt_en: Fix VNIC accounting when enabling aRFS on 57500 chips. net: dsa: sja1105: Fix missing unlock on error in sk_buff() gve: replace kfree with kvfree selftests/bpf: fix test_xdp_noinline on s390 selftests/bpf: fix "valid read map access into a read-only array 1" on s390 net/mlx5: Replace kfree with kvfree MAINTAINERS: update netsec driver ipv6: Unlink sibling route in case of failure liquidio: Replace vmalloc + memset with vzalloc udp: Fix typo in net/ipv4/udp.c net: bcmgenet: use promisc for unsupported filters ipv6: rt6_check should return NULL if 'from' is NULL tipc: initialize 'validated' field of received packets selftests: add a test case for rp_filter fib: relax source validation check for loopback packets mlxsw: spectrum: Do not process learned records with a dummy FID ...
decompress_unlzo.c
// SPDX-License-Identifier: GPL-2.0-or-later
/*
* LZO decompressor for the Linux kernel. Code borrowed from the lzo
* implementation by Markus Franz Xaver Johannes Oberhumer.
*
* Linux kernel adaptation:
* Copyright (C) 2009
* Albin Tonnerre, Free Electrons <albin.tonnerre@free-electrons.com>
*
* Original code:
* Copyright (C) 1996-2005 Markus Franz Xaver Johannes Oberhumer
* All Rights Reserved.
*
* Markus F.X.J. Oberhumer
* <markus@oberhumer.com>
* http://www.oberhumer.com/opensource/lzop/
*/
#ifdef STATIC
#define PREBOOT
#include "lzo/lzo1x_decompress_safe.c"
#else
#include <linux/decompress/unlzo.h>
#endif
#include <linux/types.h>
#include <linux/lzo.h>
#include <linux/decompress/mm.h>
#include <linux/compiler.h>
#include <asm/unaligned.h>
static const unsigned char lzop_magic[] = {
0x89, 0x4c, 0x5a, 0x4f, 0x00, 0x0d, 0x0a, 0x1a, 0x0a };
#define LZO_BLOCK_SIZE (256*1024l)
#define HEADER_HAS_FILTER 0x00000800L
#define HEADER_SIZE_MIN (9 + 7 + 4 + 8 + 1 + 4)
#define HEADER_SIZE_MAX (9 + 7 + 1 + 8 + 8 + 4 + 1 + 255 + 4)
STATIC inline long INIT parse_header(u8 *input, long *skip, long in_len)
{
int l;
u8 *parse = input;
u8 *end = input + in_len;
u8 level = 0;
u16 version;
/*
* Check that there's enough input to possibly have a valid header.
* Then it is possible to parse several fields until the minimum
* size may have been used.
*/
if (in_len < HEADER_SIZE_MIN)
return 0;
/* read magic: 9 first bits */
for (l = 0; l < 9; l++) {
if (*parse++ != lzop_magic[l])
return 0;
}
/* get version (2bytes), skip library version (2),
* 'need to be extracted' version (2) and
* method (1) */
version = get_unaligned_be16(parse);
parse += 7;
if (version >= 0x0940)
level = *parse++;
if (get_unaligned_be32(parse) & HEADER_HAS_FILTER)
parse += 8; /* flags + filter info */
else
parse += 4; /* flags */
/*
* At least mode, mtime_low, filename length, and checksum must
* be left to be parsed. If also mtime_high is present, it's OK
* because the next input buffer check is after reading the
* filename length.
*/
if (end - parse < 8 + 1 + 4)
return 0;
/* skip mode and mtime_low */
parse += 8;
if (version >= 0x0940)
parse += 4; /* skip mtime_high */
l = *parse++;
/* don't care about the file name, and skip checksum */
if (end - parse < l + 4)
return 0;
parse += l + 4;
*skip = parse - input;
return 1;
}
STATIC int INIT unlzo(u8 *input, long in_len,
long (*fill)(void *, unsigned long),
long (*flush)(void *, unsigned long),
u8 *output, long *posp,
void (*error) (char *x))
{
u8 r = 0;
long skip = 0;
u32 src_len, dst_len;
size_t tmp;
u8 *in_buf, *in_buf_save, *out_buf;
int ret = -1;
if (output) {
out_buf = output;
} else if (!flush) {
error("NULL output pointer and no flush function provided");
goto exit;
} else {
out_buf = malloc(LZO_BLOCK_SIZE);
if (!out_buf) {
error("Could not allocate output buffer");
goto exit;
}
}
if (input && fill) {
error("Both input pointer and fill function provided, don't know what to do");
goto exit_1;
} else if (input) {
in_buf = input;
} else if (!fill) {
error("NULL input pointer and missing fill function");
goto exit_1;
} else {
in_buf = malloc(lzo1x_worst_compress(LZO_BLOCK_SIZE));
if (!in_buf) {
error("Could not allocate input buffer");
goto exit_1;
}
}
in_buf_save = in_buf;
if (posp)
*posp = 0;
if (fill) {
/*
* Start from in_buf + HEADER_SIZE_MAX to make it possible
* to use memcpy() to copy the unused data to the beginning
* of the buffer. This way memmove() isn't needed which
* is missing from pre-boot environments of most archs.
*/
in_buf += HEADER_SIZE_MAX;
in_len = fill(in_buf, HEADER_SIZE_MAX);
}
if (!parse_header(in_buf, &skip, in_len)) {
error("invalid header");
goto exit_2;
}
in_buf += skip;
in_len -= skip;
if (fill) {
/* Move the unused data to the beginning of the buffer. */
memcpy(in_buf_save, in_buf, in_len);
in_buf = in_buf_save;
}
if (posp)
*posp = skip;
for (;;) {
/* read uncompressed block size */
if (fill && in_len < 4) {
skip = fill(in_buf + in_len, 4 - in_len);
if (skip > 0)
in_len += skip;
}
if (in_len < 4) {
error("file corrupted");
goto exit_2;
}
dst_len = get_unaligned_be32(in_buf);
in_buf += 4;
in_len -= 4;
/* exit if last block */
if (dst_len == 0) {
if (posp)
*posp += 4;
break;
}
if (dst_len > LZO_BLOCK_SIZE) {
error("dest len longer than block size");
goto exit_2;
}
/* read compressed block size, and skip block checksum info */
if (fill && in_len < 8) {
skip = fill(in_buf + in_len, 8 - in_len);
if (skip > 0)
in_len += skip;
}
if (in_len < 8) {
error("file corrupted");
goto exit_2;
}
src_len = get_unaligned_be32(in_buf);
in_buf += 8;
in_len -= 8;
if (src_len <= 0 || src_len > dst_len) {
error("file corrupted");
goto exit_2;
}
/* decompress */
if (fill && in_len < src_len) {
skip = fill(in_buf + in_len, src_len - in_len);
if (skip > 0)
in_len += skip;
}
if (in_len < src_len) {
error("file corrupted");
goto exit_2;
}
tmp = dst_len;
/* When the input data is not compressed at all,
* lzo1x_decompress_safe will fail, so call memcpy()
* instead */
if (unlikely(dst_len == src_len))
memcpy(out_buf, in_buf, src_len);
else {
r = lzo1x_decompress_safe((u8 *) in_buf, src_len,
out_buf, &tmp);
if (r != LZO_E_OK || dst_len != tmp) {
error("Compressed data violation");
goto exit_2;
}
}
if (flush && flush(out_buf, dst_len) != dst_len)
goto exit_2;
if (output)
out_buf += dst_len;
if (posp)
*posp += src_len + 12;
in_buf += src_len;
in_len -= src_len;
if (fill) {
/*
* If there happens to still be unused data left in
* in_buf, move it to the beginning of the buffer.
* Use a loop to avoid memmove() dependency.
*/
if (in_len > 0)
for (skip = 0; skip < in_len; ++skip)
in_buf_save[skip] = in_buf[skip];
in_buf = in_buf_save;
}
}
ret = 0;
exit_2:
if (!input)
free(in_buf_save);
exit_1:
if (!output)
free(out_buf);
exit:
return ret;
}
#ifdef PREBOOT
STATIC int INIT __decompress(unsigned char *buf, long len,
long (*fill)(void*, unsigned long),
long (*flush)(void*, unsigned long),
unsigned char *out_buf, long olen,
long *pos,
void (*error)(char *x))
{
return unlzo(buf, len, fill, flush, out_buf, pos, error);
}
#endif
![swh spinner](/static/img/swh-spinner.gif)
Computing file changes ...