Revision 5f4fc6d440d77a2cf74fe4ea56955674ac7e35e7 authored by Linus Torvalds on 19 July 2019, 17:06:06 UTC, committed by Linus Torvalds on 19 July 2019, 17:06:06 UTC
Pull networking fixes from David Miller: 1) Fix AF_XDP cq entry leak, from Ilya Maximets. 2) Fix handling of PHY power-down on RTL8411B, from Heiner Kallweit. 3) Add some new PCI IDs to iwlwifi, from Ihab Zhaika. 4) Fix handling of neigh timers wrt. entries added by userspace, from Lorenzo Bianconi. 5) Various cases of missing of_node_put(), from Nishka Dasgupta. 6) The new NET_ACT_CT needs to depend upon NF_NAT, from Yue Haibing. 7) Various RDS layer fixes, from Gerd Rausch. 8) Fix some more fallout from TCQ_F_CAN_BYPASS generalization, from Cong Wang. 9) Fix FIB source validation checks over loopback, also from Cong Wang. 10) Use promisc for unsupported number of filters, from Justin Chen. 11) Missing sibling route unlink on failure in ipv6, from Ido Schimmel. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (90 commits) tcp: fix tcp_set_congestion_control() use from bpf hook ag71xx: fix return value check in ag71xx_probe() ag71xx: fix error return code in ag71xx_probe() usb: qmi_wwan: add D-Link DWM-222 A2 device ID bnxt_en: Fix VNIC accounting when enabling aRFS on 57500 chips. net: dsa: sja1105: Fix missing unlock on error in sk_buff() gve: replace kfree with kvfree selftests/bpf: fix test_xdp_noinline on s390 selftests/bpf: fix "valid read map access into a read-only array 1" on s390 net/mlx5: Replace kfree with kvfree MAINTAINERS: update netsec driver ipv6: Unlink sibling route in case of failure liquidio: Replace vmalloc + memset with vzalloc udp: Fix typo in net/ipv4/udp.c net: bcmgenet: use promisc for unsupported filters ipv6: rt6_check should return NULL if 'from' is NULL tipc: initialize 'validated' field of received packets selftests: add a test case for rp_filter fib: relax source validation check for loopback packets mlxsw: spectrum: Do not process learned records with a dummy FID ...
kstrtox.c
// SPDX-License-Identifier: GPL-2.0
/*
* Convert integer string representation to an integer.
* If an integer doesn't fit into specified type, -E is returned.
*
* Integer starts with optional sign.
* kstrtou*() functions do not accept sign "-".
*
* Radix 0 means autodetection: leading "0x" implies radix 16,
* leading "0" implies radix 8, otherwise radix is 10.
* Autodetection hints work after optional sign, but not before.
*
* If -E is returned, result is not touched.
*/
#include <linux/ctype.h>
#include <linux/errno.h>
#include <linux/kernel.h>
#include <linux/math64.h>
#include <linux/export.h>
#include <linux/types.h>
#include <linux/uaccess.h>
#include "kstrtox.h"
const char *_parse_integer_fixup_radix(const char *s, unsigned int *base)
{
if (*base == 0) {
if (s[0] == '0') {
if (_tolower(s[1]) == 'x' && isxdigit(s[2]))
*base = 16;
else
*base = 8;
} else
*base = 10;
}
if (*base == 16 && s[0] == '0' && _tolower(s[1]) == 'x')
s += 2;
return s;
}
/*
* Convert non-negative integer string representation in explicitly given radix
* to an integer.
* Return number of characters consumed maybe or-ed with overflow bit.
* If overflow occurs, result integer (incorrect) is still returned.
*
* Don't you dare use this function.
*/
unsigned int _parse_integer(const char *s, unsigned int base, unsigned long long *p)
{
unsigned long long res;
unsigned int rv;
res = 0;
rv = 0;
while (1) {
unsigned int c = *s;
unsigned int lc = c | 0x20; /* don't tolower() this line */
unsigned int val;
if ('0' <= c && c <= '9')
val = c - '0';
else if ('a' <= lc && lc <= 'f')
val = lc - 'a' + 10;
else
break;
if (val >= base)
break;
/*
* Check for overflow only if we are within range of
* it in the max base we support (16)
*/
if (unlikely(res & (~0ull << 60))) {
if (res > div_u64(ULLONG_MAX - val, base))
rv |= KSTRTOX_OVERFLOW;
}
res = res * base + val;
rv++;
s++;
}
*p = res;
return rv;
}
static int _kstrtoull(const char *s, unsigned int base, unsigned long long *res)
{
unsigned long long _res;
unsigned int rv;
s = _parse_integer_fixup_radix(s, &base);
rv = _parse_integer(s, base, &_res);
if (rv & KSTRTOX_OVERFLOW)
return -ERANGE;
if (rv == 0)
return -EINVAL;
s += rv;
if (*s == '\n')
s++;
if (*s)
return -EINVAL;
*res = _res;
return 0;
}
/**
* kstrtoull - convert a string to an unsigned long long
* @s: The start of the string. The string must be null-terminated, and may also
* include a single newline before its terminating null. The first character
* may also be a plus sign, but not a minus sign.
* @base: The number base to use. The maximum supported base is 16. If base is
* given as 0, then the base of the string is automatically detected with the
* conventional semantics - If it begins with 0x the number will be parsed as a
* hexadecimal (case insensitive), if it otherwise begins with 0, it will be
* parsed as an octal number. Otherwise it will be parsed as a decimal.
* @res: Where to write the result of the conversion on success.
*
* Returns 0 on success, -ERANGE on overflow and -EINVAL on parsing error.
* Used as a replacement for the obsolete simple_strtoull. Return code must
* be checked.
*/
int kstrtoull(const char *s, unsigned int base, unsigned long long *res)
{
if (s[0] == '+')
s++;
return _kstrtoull(s, base, res);
}
EXPORT_SYMBOL(kstrtoull);
/**
* kstrtoll - convert a string to a long long
* @s: The start of the string. The string must be null-terminated, and may also
* include a single newline before its terminating null. The first character
* may also be a plus sign or a minus sign.
* @base: The number base to use. The maximum supported base is 16. If base is
* given as 0, then the base of the string is automatically detected with the
* conventional semantics - If it begins with 0x the number will be parsed as a
* hexadecimal (case insensitive), if it otherwise begins with 0, it will be
* parsed as an octal number. Otherwise it will be parsed as a decimal.
* @res: Where to write the result of the conversion on success.
*
* Returns 0 on success, -ERANGE on overflow and -EINVAL on parsing error.
* Used as a replacement for the obsolete simple_strtoull. Return code must
* be checked.
*/
int kstrtoll(const char *s, unsigned int base, long long *res)
{
unsigned long long tmp;
int rv;
if (s[0] == '-') {
rv = _kstrtoull(s + 1, base, &tmp);
if (rv < 0)
return rv;
if ((long long)-tmp > 0)
return -ERANGE;
*res = -tmp;
} else {
rv = kstrtoull(s, base, &tmp);
if (rv < 0)
return rv;
if ((long long)tmp < 0)
return -ERANGE;
*res = tmp;
}
return 0;
}
EXPORT_SYMBOL(kstrtoll);
/* Internal, do not use. */
int _kstrtoul(const char *s, unsigned int base, unsigned long *res)
{
unsigned long long tmp;
int rv;
rv = kstrtoull(s, base, &tmp);
if (rv < 0)
return rv;
if (tmp != (unsigned long)tmp)
return -ERANGE;
*res = tmp;
return 0;
}
EXPORT_SYMBOL(_kstrtoul);
/* Internal, do not use. */
int _kstrtol(const char *s, unsigned int base, long *res)
{
long long tmp;
int rv;
rv = kstrtoll(s, base, &tmp);
if (rv < 0)
return rv;
if (tmp != (long)tmp)
return -ERANGE;
*res = tmp;
return 0;
}
EXPORT_SYMBOL(_kstrtol);
/**
* kstrtouint - convert a string to an unsigned int
* @s: The start of the string. The string must be null-terminated, and may also
* include a single newline before its terminating null. The first character
* may also be a plus sign, but not a minus sign.
* @base: The number base to use. The maximum supported base is 16. If base is
* given as 0, then the base of the string is automatically detected with the
* conventional semantics - If it begins with 0x the number will be parsed as a
* hexadecimal (case insensitive), if it otherwise begins with 0, it will be
* parsed as an octal number. Otherwise it will be parsed as a decimal.
* @res: Where to write the result of the conversion on success.
*
* Returns 0 on success, -ERANGE on overflow and -EINVAL on parsing error.
* Used as a replacement for the obsolete simple_strtoull. Return code must
* be checked.
*/
int kstrtouint(const char *s, unsigned int base, unsigned int *res)
{
unsigned long long tmp;
int rv;
rv = kstrtoull(s, base, &tmp);
if (rv < 0)
return rv;
if (tmp != (unsigned int)tmp)
return -ERANGE;
*res = tmp;
return 0;
}
EXPORT_SYMBOL(kstrtouint);
/**
* kstrtoint - convert a string to an int
* @s: The start of the string. The string must be null-terminated, and may also
* include a single newline before its terminating null. The first character
* may also be a plus sign or a minus sign.
* @base: The number base to use. The maximum supported base is 16. If base is
* given as 0, then the base of the string is automatically detected with the
* conventional semantics - If it begins with 0x the number will be parsed as a
* hexadecimal (case insensitive), if it otherwise begins with 0, it will be
* parsed as an octal number. Otherwise it will be parsed as a decimal.
* @res: Where to write the result of the conversion on success.
*
* Returns 0 on success, -ERANGE on overflow and -EINVAL on parsing error.
* Used as a replacement for the obsolete simple_strtoull. Return code must
* be checked.
*/
int kstrtoint(const char *s, unsigned int base, int *res)
{
long long tmp;
int rv;
rv = kstrtoll(s, base, &tmp);
if (rv < 0)
return rv;
if (tmp != (int)tmp)
return -ERANGE;
*res = tmp;
return 0;
}
EXPORT_SYMBOL(kstrtoint);
int kstrtou16(const char *s, unsigned int base, u16 *res)
{
unsigned long long tmp;
int rv;
rv = kstrtoull(s, base, &tmp);
if (rv < 0)
return rv;
if (tmp != (u16)tmp)
return -ERANGE;
*res = tmp;
return 0;
}
EXPORT_SYMBOL(kstrtou16);
int kstrtos16(const char *s, unsigned int base, s16 *res)
{
long long tmp;
int rv;
rv = kstrtoll(s, base, &tmp);
if (rv < 0)
return rv;
if (tmp != (s16)tmp)
return -ERANGE;
*res = tmp;
return 0;
}
EXPORT_SYMBOL(kstrtos16);
int kstrtou8(const char *s, unsigned int base, u8 *res)
{
unsigned long long tmp;
int rv;
rv = kstrtoull(s, base, &tmp);
if (rv < 0)
return rv;
if (tmp != (u8)tmp)
return -ERANGE;
*res = tmp;
return 0;
}
EXPORT_SYMBOL(kstrtou8);
int kstrtos8(const char *s, unsigned int base, s8 *res)
{
long long tmp;
int rv;
rv = kstrtoll(s, base, &tmp);
if (rv < 0)
return rv;
if (tmp != (s8)tmp)
return -ERANGE;
*res = tmp;
return 0;
}
EXPORT_SYMBOL(kstrtos8);
/**
* kstrtobool - convert common user inputs into boolean values
* @s: input string
* @res: result
*
* This routine returns 0 iff the first character is one of 'Yy1Nn0', or
* [oO][NnFf] for "on" and "off". Otherwise it will return -EINVAL. Value
* pointed to by res is updated upon finding a match.
*/
int kstrtobool(const char *s, bool *res)
{
if (!s)
return -EINVAL;
switch (s[0]) {
case 'y':
case 'Y':
case '1':
*res = true;
return 0;
case 'n':
case 'N':
case '0':
*res = false;
return 0;
case 'o':
case 'O':
switch (s[1]) {
case 'n':
case 'N':
*res = true;
return 0;
case 'f':
case 'F':
*res = false;
return 0;
default:
break;
}
default:
break;
}
return -EINVAL;
}
EXPORT_SYMBOL(kstrtobool);
/*
* Since "base" would be a nonsense argument, this open-codes the
* _from_user helper instead of using the helper macro below.
*/
int kstrtobool_from_user(const char __user *s, size_t count, bool *res)
{
/* Longest string needed to differentiate, newline, terminator */
char buf[4];
count = min(count, sizeof(buf) - 1);
if (copy_from_user(buf, s, count))
return -EFAULT;
buf[count] = '\0';
return kstrtobool(buf, res);
}
EXPORT_SYMBOL(kstrtobool_from_user);
#define kstrto_from_user(f, g, type) \
int f(const char __user *s, size_t count, unsigned int base, type *res) \
{ \
/* sign, base 2 representation, newline, terminator */ \
char buf[1 + sizeof(type) * 8 + 1 + 1]; \
\
count = min(count, sizeof(buf) - 1); \
if (copy_from_user(buf, s, count)) \
return -EFAULT; \
buf[count] = '\0'; \
return g(buf, base, res); \
} \
EXPORT_SYMBOL(f)
kstrto_from_user(kstrtoull_from_user, kstrtoull, unsigned long long);
kstrto_from_user(kstrtoll_from_user, kstrtoll, long long);
kstrto_from_user(kstrtoul_from_user, kstrtoul, unsigned long);
kstrto_from_user(kstrtol_from_user, kstrtol, long);
kstrto_from_user(kstrtouint_from_user, kstrtouint, unsigned int);
kstrto_from_user(kstrtoint_from_user, kstrtoint, int);
kstrto_from_user(kstrtou16_from_user, kstrtou16, u16);
kstrto_from_user(kstrtos16_from_user, kstrtos16, s16);
kstrto_from_user(kstrtou8_from_user, kstrtou8, u8);
kstrto_from_user(kstrtos8_from_user, kstrtos8, s8);
![swh spinner](/static/img/swh-spinner.gif)
Computing file changes ...