5f5425e | Linus Torvalds | 17 December 2014, 17:52:49 UTC | Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security Pull security subsystem fixes from James Morris. * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security: KEYS: remove a bogus NULL check ima: Fix build failure on powerpc when TCG_IBMVTPM dependencies are not met KEYS: Fix stale key registration at error path | 17 December 2014, 17:52:49 UTC |
c103b21 | Linus Torvalds | 17 December 2014, 17:41:32 UTC | Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse Pull fuse update from Miklos Szeredi: "The first part makes sure we don't hold up umount with pending async requests. In addition to being a cleanup, this is a small behavioral change (for the better) and unlikely to break anything. The second part prepares for a cleanup of the fuse device I/O code by adding a helper for simple request submission, with some savings in line numbers already realized" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse: fuse: use file_inode() in fuse_file_fallocate() fuse: introduce fuse_simple_request() helper fuse: reduce max out args fuse: hold inode instead of path after release fuse: flush requests on umount fuse: don't wake up reserved req in fuse_conn_kill() | 17 December 2014, 17:41:32 UTC |
603ba7e | Linus Torvalds | 16 December 2014, 23:53:03 UTC | Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull vfs pile #2 from Al Viro: "Next pile (and there'll be one or two more). The large piece in this one is getting rid of /proc/*/ns/* weirdness; among other things, it allows to (finally) make nameidata completely opaque outside of fs/namei.c, making for easier further cleanups in there" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: coda_venus_readdir(): use file_inode() fs/namei.c: fold link_path_walk() call into path_init() path_init(): don't bother with LOOKUP_PARENT in argument fs/namei.c: new helper (path_cleanup()) path_init(): store the "base" pointer to file in nameidata itself make default ->i_fop have ->open() fail with ENXIO make nameidata completely opaque outside of fs/namei.c kill proc_ns completely take the targets of /proc/*/ns/* symlinks to separate fs bury struct proc_ns in fs/proc copy address of proc_ns_ops into ns_common new helpers: ns_alloc_inum/ns_free_inum make proc_ns_operations work with struct ns_common * instead of void * switch the rest of proc_ns_operations to working with &...->ns netns: switch ->get()/->put()/->install()/->inum() to working with &net->ns make mntns ->get()/->put()/->install()/->inum() work with &mnt_ns->ns common object embedded into various struct ....ns | 16 December 2014, 23:53:03 UTC |
31f48fc | Linus Torvalds | 16 December 2014, 23:46:01 UTC | Merge branch 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs Pull isofs and reiserfs fixes from Jan Kara: "A reiserfs and an isofs fix. They arrived after I sent you my first pull request and I don't want to delay them unnecessarily till rc2" * 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs: isofs: Fix infinite looping over CE entries reiserfs: destroy allocated commit workqueue | 16 December 2014, 23:46:01 UTC |
0b233b7 | Linus Torvalds | 16 December 2014, 23:25:31 UTC | Merge branch 'for-3.19' of git://linux-nfs.org/~bfields/linux Pull nfsd updates from Bruce Fields: "A comparatively quieter cycle for nfsd this time, but still with two larger changes: - RPC server scalability improvements from Jeff Layton (using RCU instead of a spinlock to find idle threads). - server-side NFSv4.2 ALLOCATE/DEALLOCATE support from Anna Schumaker, enabling fallocate on new clients" * 'for-3.19' of git://linux-nfs.org/~bfields/linux: (32 commits) nfsd4: fix xdr4 count of server in fs_location4 nfsd4: fix xdr4 inclusion of escaped char sunrpc/cache: convert to use string_escape_str() sunrpc: only call test_bit once in svc_xprt_received fs: nfsd: Fix signedness bug in compare_blob sunrpc: add some tracepoints around enqueue and dequeue of svc_xprt sunrpc: convert to lockless lookup of queued server threads sunrpc: fix potential races in pool_stats collection sunrpc: add a rcu_head to svc_rqst and use kfree_rcu to free it sunrpc: require svc_create callers to pass in meaningful shutdown routine sunrpc: have svc_wake_up only deal with pool 0 sunrpc: convert sp_task_pending flag to use atomic bitops sunrpc: move rq_cachetype field to better optimize space sunrpc: move rq_splice_ok flag into rq_flags sunrpc: move rq_dropme flag into rq_flags sunrpc: move rq_usedeferral flag to rq_flags sunrpc: move rq_local field to rq_flags sunrpc: add a generic rq_flags field to svc_rqst and move rq_secure to it nfsd: minor off by one checks in __write_versions() sunrpc: release svc_pool_map reference when serv allocation fails ... | 16 December 2014, 23:25:31 UTC |
6f51ee7 | Linus Torvalds | 16 December 2014, 22:53:01 UTC | Merge tag 'iommu-config-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC/iommu configuration update from Arnd Bergmann: "The iomm-config branch contains work from Will Deacon, quoting his description: This series adds automatic IOMMU and DMA-mapping configuration for OF-based DMA masters described using the generic IOMMU devicetree bindings. Although there is plenty of future work around splitting up iommu_ops, adding default IOMMU domains and sorting out automatic IOMMU group creation for the platform_bus, this is already useful enough for people to port over their IOMMU drivers and start using the new probing infrastructure (indeed, Marek has patches queued for the Exynos IOMMU). The branch touches core ARM and IOMMU driver files, and the respective maintainers (Russell King and Joerg Roedel) agreed to have the contents merged through the arm-soc tree. The final version was ready just before the merge window, so we ended up delaying it a bit longer than the rest, but we don't expect to see regressions because this is just additional infrastructure that will get used in drivers starting in 3.20 but is unused so far" * tag 'iommu-config-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: iommu: store DT-probed IOMMU data privately arm: dma-mapping: plumb our iommu mapping ops into arch_setup_dma_ops arm: call iommu_init before of_platform_populate dma-mapping: detect and configure IOMMU in of_dma_configure iommu: fix initialization without 'add_device' callback iommu: provide helper function to configure an IOMMU for an of master iommu: add new iommu_ops callback for adding an OF device dma-mapping: replace set_arch_dma_coherent_ops with arch_setup_dma_ops iommu: provide early initialisation hook for IOMMU drivers | 16 December 2014, 22:53:01 UTC |
205dc20 | Linus Torvalds | 16 December 2014, 22:26:26 UTC | Merge tag 'dt2-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC DT updates part 2 from Arnd Bergmann: "This is a follow-up to the early ARM SoC DT changes, with additional content that has external dependencies: - The Tegra IOMMU DT support depends on changes from the iommu tree, plus the contents of the arm-soc drivers branch - The MVEBU PHY support depends on changes from the phy tree - The AT91 DT support depends on changes from the RTC and DMA-slave trees All of these changes just enable additional devices for existing platforms" * tag 'dt2-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: ARM: tegra: Enable IOMMU for display controllers on Tegra124 ARM: tegra: Enable IOMMU for display controllers on Tegra114 ARM: tegra: Enable IOMMU for display controllers on Tegra30 ARM: tegra: Add memory controller support for Tegra124 ARM: tegra: Add memory controller support for Tegra114 ARM: tegra: Add memory controller support for Tegra30 ARM: tegra: Add APB_MISC_GP as a MIPI pad control bank ARM: mvebu: add PHY support to the dts for the USB controllers on Armada 375 ARM: mvebu: add Device Tree description of USB cluster controller on Armada 375 ARM: at91/dt: at91sam9g45: add ISI node ARM: at91/dt: enable the RTT block on the at91sam9m10g45ek board ARM: at91/dt: enable the RTT block on the sam9g20ek board ARM: at91/dt: add GPBR nodes ARM: at91/dt: add RTT nodes to at91 dtsis ARM: at91/dt: at91sam9rl: add rtc ARM: at91: fix GPLv2 wording ARM: at91/dt: sama5d4: add DMA support ARM: at91/dt: sama5d4: use macro instead of numeric value | 16 December 2014, 22:26:26 UTC |
94bbdb6 | Linus Torvalds | 16 December 2014, 22:17:36 UTC | Merge tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC fixes from Arnd Bergmann: "Here are the first arm-soc bug fixes. Most of these are OMAP related fixes for regressions or minor bugs. Aside from that, there are a few defconfig changes for various platforms" * tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: iommu/exynos: Fix arm64 allmodconfig build ARM: defconfigs: use CONFIG_CPUFREQ_DT ARM: omap2plus_defconfig: Enable AHCI_PLATFORM driver ARM: dts: am437x-sk-evm.dts: fix LCD timings ARM: dts: dra7-evm: Update SMPS7 (VDD_CORE) max voltage to match DM ARM: dts: dra7-evm: Fix typo in SMPS6 (VDD_GPU) max voltage ARM: OMAP2+: AM43x: Add ID for ES1.2 ARM: dts: am437x-sk: fix lcd enable pin mux data ARM: dts: Fix gpmc regression for omap 2430sdp smc91x Revert "ARM: shmobile: multiplatform: add Audo DMAC peri peri support on defconfig" ARM: dts: dra7: fix DSS PLL clock mux registers ARM: dts: DRA7: wdt: Fix compatible property for watchdog node ARM: OMAP2+: clock: remove unused function prototype | 16 December 2014, 22:17:36 UTC |
36c0a48 | Linus Torvalds | 16 December 2014, 22:12:33 UTC | Merge tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux Pull arm64 fixes from Will Deacon: "Given that my availability next week is likely to be poor, here are three arm64 fixes to resolve some issues introduced by features merged last week. I was going to wait until -rc1, but it doesn't make much sense to sit on fixes. Fix some fallout introduced during the merge window: - Build failure when PM_SLEEP is disabled but CPU_IDLE is enabled - Compiler warning from page table dumper w/ 48-bit VAs - Erroneous page table truncation in reported dump" * tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: arm64: mm: dump: don't skip final region arm64: mm: dump: fix shift warning arm64: psci: Fix build breakage without PM_SLEEP | 16 December 2014, 22:12:33 UTC |
a643fc7 | Linus Torvalds | 16 December 2014, 22:08:53 UTC | Merge tag 'xtensa-next-20141215' of git://github.com/czankel/xtensa-linux Pull Xtensa fixes from Chris Zankel: - fix nommu support - remove s6000 variant and s6105 platform - fix permissions for kmapped pages so that copy_to_user_page works with them - add power management menu to Kconfig to allow use of runtime PM - disable linker optimizations because of a linker bug - fix sparse error * tag 'xtensa-next-20141215' of git://github.com/czankel/xtensa-linux: xtensa: disable link optimization xtensa/uaccess: fix sparse errors xtensa: fix kmap_prot definition xtensa: add power management menu to Kconfig xtensa: remove s6000 variant and s6105 platform xtensa: make PLATFORM_DEFAULT_MEM parameters configurable xtensa: nommu: clean up memory map dump xtensa: nommu: reserve memory below PLATFORM_DEFAULT_MEM_START xtensa: nommu: set up cache and atomctl in initialize_mmu xtensa: move vecbase SR initialization to _startup xtensa: nommu: fix uImage load address xtensa: nommu: fix load address definitions xtensa: nommu: fix Image.elf reset code and ld script xtensa: nommu: add MMU dependency to DEBUG_TLB_SANITY xtensa: nommu: don't build most of the cache flushing code xtensa: nommu: don't provide arch_get_unmapped_area xtensa: nommu: provide MAP_UNINITIALIZED definition xtensa: nommu: provide _PAGE_CHG_MASK definition xtensa: nommu: provide __invalidate_dcache_page_alias stub xtensa: nommu: move init_mmu stub to nommu_context.h | 16 December 2014, 22:08:53 UTC |
0db2812 | Linus Torvalds | 16 December 2014, 21:54:16 UTC | Merge git://git.kernel.org/pub/scm/linux/kernel/git/cmetcalf/linux-tile Pull arch/tile updates from Chris Metcalf: "Note that one of the changes converts my old cmetcalf@tilera.com email in MAINTAINERS to the cmetcalf@ezchip.com email that you see on this email" * git://git.kernel.org/pub/scm/linux/kernel/git/cmetcalf/linux-tile: arch/tile: update MAINTAINERS email to EZchip tile: avoid undefined behavior with regs[TREG_TP] etc arch: tile: kernel: kgdb.c: Use memcpy() instead of pointer copy one by one tile: Use the more common pr_warn instead of pr_warning arch: tile: gxio: Export symbols for module using in 'mpipe.c' arch: tile: kernel: signal.c: Use __copy_from/to_user() instead of __get/put_user() | 16 December 2014, 21:54:16 UTC |
eb64c3c | Linus Torvalds | 16 December 2014, 21:23:03 UTC | Merge tag 'stable/for-linus-3.19-rc0b-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip Pull additional xen update from David Vrabel: "Xen: additional features for 3.19-rc0 - Linear p2m for x86 PV guests which simplifies the p2m code, improves performance and will allow for > 512 GB PV guests in the future. A last-minute, configuration specific issue was discovered with this change which is why it was not included in my previous pull request. This is now been fixed and tested" * tag 'stable/for-linus-3.19-rc0b-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: xen: switch to post-init routines in xen mmu.c earlier Revert "swiotlb-xen: pass dev_addr to swiotlb_tbl_unmap_single" xen: annotate xen_set_identity_and_remap_chunk() with __init xen: introduce helper functions to do safe read and write accesses xen: Speed up set_phys_to_machine() by using read-only mappings xen: switch to linear virtual mapped sparse p2m list xen: Hide get_phys_to_machine() to be able to tune common path x86: Introduce function to get pmd entry pointer xen: Delay invalidating extra memory xen: Delay m2p_override initialization xen: Delay remapping memory of pv-domain xen: use common page allocation function in p2m.c xen: Make functions static xen: fix some style issues in p2m.c | 16 December 2014, 21:23:03 UTC |
61de8e5 | Linus Torvalds | 16 December 2014, 21:15:12 UTC | Merge tag 'linux-kselftest-3.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest Pull kselftest update from Shuah Khan: "kselftest updates for 3.19-rc1: - kcmp test include file cleanup - kcmp change to build on all architectures - A light weight kselftest framework that provides a set of interfaces for tests to use to report results. In addition, several tests are updated to use the framework. - A new runtime system size test that prints the amount of RAM that the currently running system is using" * tag 'linux-kselftest-3.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest: selftest: size: Add size test for Linux kernel selftests/kcmp: Always try to build the test selftests/kcmp: Don't include kernel headers kcmp: Move kcmp.h into uapi selftests/timers: change test to use ksft framework selftests/kcmp: change test to use ksft framework selftests/ipc: change test to use ksft framework selftests/breakpoints: change test to use ksft framework selftests: add kselftest framework for uniform test reporting selftests/user: move test out of Makefile into a shell script selftests/net: move test out of Makefile into a shell script | 16 December 2014, 21:15:12 UTC |
a7c180a | Linus Torvalds | 16 December 2014, 20:53:59 UTC | Merge tag 'trace-3.19-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace Pull tracing updates from Steven Rostedt: "As the merge window is still open, and this code was not as complex as I thought it might be. I'm pushing this in now. This will allow Thomas to debug his irq work for 3.20. This adds two new features: 1) Allow traceopoints to be enabled right after mm_init(). By passing in the trace_event= kernel command line parameter, tracepoints can be enabled at boot up. For debugging things like the initialization of interrupts, it is needed to have tracepoints enabled very early. People have asked about this before and this has been on my todo list. As it can be helpful for Thomas to debug his upcoming 3.20 IRQ work, I'm pushing this now. This way he can add tracepoints into the IRQ set up and have users enable them when things go wrong. 2) Have the tracepoints printed via printk() (the console) when they are triggered. If the irq code locks up or reboots the box, having the tracepoint output go into the kernel ring buffer is useless for debugging. But being able to add the tp_printk kernel command line option along with the trace_event= option will have these tracepoints printed as they occur, and that can be really useful for debugging early lock up or reboot problems. This code is not that intrusive and it passed all my tests. Thomas tried them out too and it works for his needs. Link: http://lkml.kernel.org/r/20141214201609.126831471@goodmis.org" * tag 'trace-3.19-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: tracing: Add tp_printk cmdline to have tracepoints go to printk() tracing: Move enabling tracepoints to just after rcu_init() | 16 December 2014, 20:53:59 UTC |
5f1b295 | Arnd Bergmann | 16 December 2014, 20:43:15 UTC | Merge tag 'renesas-defconfig-fixes-for-v3.19' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into fixes Pull "Renesas ARM Based SoC Defconfig Fixes for v3.19" from Simon Horman: * Revert change enabling RCAR_AUDMAC_PP in shmobile_defconfig Unfortunately enabling RCAR_AUDMAC_PP support this patch breaks dmaengine support on R-Car Gen2 boards. This should be resolved by driver updates in v3.20. But v3.19 was too early for this defconfig change. * tag 'renesas-defconfig-fixes-for-v3.19' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas: Revert "ARM: shmobile: multiplatform: add Audo DMAC peri peri support on defconfig" Signed-off-by: Arnd Bergmann <arnd@arndb.de> | 16 December 2014, 20:43:15 UTC |
20911ce | Mark Brown | 15 December 2014, 15:54:42 UTC | iommu/exynos: Fix arm64 allmodconfig build The Exynos IOMMU driver uses the ARM specific dmac_flush_range() and outer_flush_range() functions. This breaks the build on arm64 allmodconfig in -next since support has been merged for some Exynos ARMv8 SoCs. Add a dependency on ARM to keep things building until either the driver has the ARM dependencies removed or the ARMv8 architecture code implements these ARM specific APIs. Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de> | 16 December 2014, 20:40:29 UTC |
1f2fdbd | Chris Zankel | 16 December 2014, 05:22:21 UTC | xtensa: disable link optimization The default linker behavior is to optimize identical literal values and remove unnecessary overhead. However, because of a bug in the linker, this currently results in an error ('call target out of range'). Disable link-time optimizations per default until there is a fix for the linker and add the option to iss_defconfig. Signed-off-by: Chris Zankel <chris@zankel.net> | 16 December 2014, 07:47:24 UTC |
5057975 | Dan Carpenter | 11 December 2014, 19:59:38 UTC | KEYS: remove a bogus NULL check We already checked if "desc" was NULL at the beginning of the function and we've dereferenced it so this causes a static checker warning. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: James Morris <james.l.morris@oracle.com> | 16 December 2014, 07:05:20 UTC |
4255a8e | Michael S. Tsirkin | 14 December 2014, 16:53:10 UTC | xtensa/uaccess: fix sparse errors virtio wants to read bitwise types from userspace using get_user. At the moment this triggers sparse errors, since the value is passed through an integer. Fix that up using __force. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Chris Zankel <chris@zankel.net> | 16 December 2014, 04:14:26 UTC |
2cb54e8 | Chris Zankel | 16 December 2014, 04:10:39 UTC | Merge tag 'xtensa-for-next-20141213' of git://github.com/jcmvbkbc/linux-xtensa into for_next Xtensa improvements for 3.19: - fix permissions for kmapped pages so that copy_to_user_page works with them; - add power management menu to Kconfig to allow use of runtime PM. | 16 December 2014, 04:10:39 UTC |
865566e | Chris Zankel | 16 December 2014, 04:09:06 UTC | Merge tag 'v3.18' into for_next Linux 3.18 | 16 December 2014, 04:09:06 UTC |
2dbfca5 | Linus Torvalds | 16 December 2014, 02:28:25 UTC | Merge branch 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/cooloney/linux-leds Pull LED subsystem update from Bryan Wu: "We got some cleanup and driver for LP8860 as well as some patches for LED Flash Class" * 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/cooloney/linux-leds: leds: lp8860: Fix module dependency leds: lp8860: Introduce TI lp8860 4 channel LED driver leds: Add support for setting brightness in a synchronous way leds: implement sysfs interface locking mechanism leds: syscon: handle multiple syscon instances leds: delete copy/paste mistake leds: regulator: Convert to devm_regulator_get_exclusive | 16 December 2014, 02:28:25 UTC |
dab363f | Linus Torvalds | 16 December 2014, 02:06:13 UTC | Merge tag 'staging-3.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging Pull staging driver updates from Greg KH: "Here's the big staging tree pull request for 3.19-rc1. We continued to delete more lines than were added, always a good thing, but not at a huge rate this release, only about 70k lines removed overall mostly from removing the horrid bcm driver. Lots of normal staging driver cleanups and fixes all over the place, well over a thousand of them, the shortlog shows all the horrid details. The "contentious" thing here is the movement of the Android binder code out of staging into the "real" part of the kernel. This is code that has been stable for a few years now and is working as-is in the tens of millions of devices with no issues. Yes, the code is horrid, and the userspace api leaves a lot to be desired, but it's not going to change due to legacy issues that we have no control over. Because so many devices and companies rely on this, and the code is stable, might as well promote it out of staging. This was all discussed at the Linux Plumbers conference, and everyone participating agreed that this was the best way forward. There is work happening to replace the binder code with something new that is happening right now, but I don't expect to see the results of that work for another year at the earliest. If that ever happens, and Android switches over to it, I'll gladly remove this version. As for maintainers, I'll be glad to maintain this code, I've been doing it for the past few years with no problems. I'll send a MAINTAINERS entry for it before 3.19-final is out, still need to talk to the Google developers about if they are willing to help with it or not, last I checked they were, which was good. All of these patches have been in linux-next for a while with no reported issues" * tag 'staging-3.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (1382 commits) Staging: slicoss: Fix long line issues in slicoss.c staging: rtl8712: remove unnecessary else after return staging: comedi: change some printk calls to pr_err staging: rtl8723au: hal: Removed the extra semicolon lustre: Deletion of unnecessary checks before three function calls staging: lustre: fix sparse warnings: static function declaration staging: lustre: fixed sparse warnings related to static declarations staging: unisys: remove duplicate header staging: unisys: remove unneeded structure staging: ft1000 : replace __attribute ((__packed__) with __packed drivers: staging: rtl8192e: Include "asm/unaligned.h" instead of "access_ok.h" in "rtl819x_BAProc.c" Drivers:staging:rtl8192e: Fixed checkpatch warning Drivers:staging:clocking-wizard: Added a newline staging: clocking-wizard: check for a valid clk_name pointer staging: rtl8723au: Hal_InitPGData() avoid unnecessary typecasts staging: rtl8723au: _DisableAnalog(): Avoid zero-init variables unnecessarily staging: rtl8723au: Remove unnecessary wrapper _ResetDigitalProcedure1() staging: rtl8723au: _ResetDigitalProcedure1_92C() reduce code obfuscation staging: rtl8723au: Remove unnecessary wrapper _DisableRFAFEAndResetBB() staging: rtl8723au: _DisableRFAFEAndResetBB8192C(): Reduce code obfuscation ... | 16 December 2014, 02:06:13 UTC |
d0bffab | James Morris | 16 December 2014, 01:49:10 UTC | Merge branch 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/zohar/linux-integrity into for-linus | 16 December 2014, 01:49:10 UTC |
a68db9c | Linus Torvalds | 16 December 2014, 01:40:28 UTC | Merge tag 'firewire-updates' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394 Pull firewire updates from Stefan Richter: "IEEE 1394 subsystem updates: - clean up firewire-ohci's longlived vm-mapping - use target instance lock instead of core lock in firewire-sbp2" * tag 'firewire-updates' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394: firewire: sbp2: replace card lock by target lock firewire: sbp2: replace some spin_lock_irqsave by spin_lock_irq firewire: sbp2: protect a reference counter properly firewire: core: document fw_csr_string's truncation of long strings firewire: ohci: replace vm_map_ram() with vmap() | 16 December 2014, 01:40:28 UTC |
7051d8e | Linus Torvalds | 16 December 2014, 01:36:45 UTC | Merge tag 'for-v3.19' of git://git.infradead.org/battery-2.6 Pull power supply updates from Sebastian Reichel:: "Power supply and reset changes for the v3.19 series - update power/reset drivers to use kernel restart handler - add power off driver for i.mx6 - add DT support for gpio-charger" * tag 'for-v3.19' of git://git.infradead.org/battery-2.6: power: reset: adjust priority of simple syscon reboot driver power: ds2782_battery: Simplify the PM hooks power/reset: brcmstb: Register with kernel restart handler power/reset: hisi: Register with kernel restart handler power/reset: keystone: Register with kernel restart handler power/reset: axxia: Register with kernel restart handler power/reset: xgene: Register with kernel restart handler power/reset: xgene: Use mdelay instead of jiffies based timeout power/reset: xgene: Use local variable dev instead of pdev->dev power/reset: xgene: Drop devm_kfree power/reset: xgene: Return -ENOMEM if out of memory power/reset: vexpress: Register with kernel restart handler power: reset: imx-snvs-poweroff: add power off driver for i.mx6 power: gpio-charger: add device tree support dt-bindings: document gpio-charger bindings | 16 December 2014, 01:36:45 UTC |
d3255ec | Linus Torvalds | 16 December 2014, 01:33:47 UTC | Merge tag 'hsi-for-3.19' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-hsi Pull HSI update from Sebastian Reichel: "Misc fixes in omap-ssi and nokia-modem drivers" * tag 'hsi-for-3.19' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-hsi: HSI: nokia-modem: fix error handling of irq_of_parse_and_map HSI: nokia-modem: setup default value for pm parameter HSI: omap_ssi_port: Don't print uninitialized err HSI: remove deprecated IRQF_DISABLED | 16 December 2014, 01:33:47 UTC |
60d7ef3 | Linus Torvalds | 16 December 2014, 01:30:09 UTC | Merge branch 'irq-irqdomain-arm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull irq domain ARM updates from Thomas Gleixner: "This set of changes make use of hierarchical irqdomains to provide: - MSI/ITS support for GICv3 - MSI support for GICv2m - Interrupt polarity extender for GICv1 Marc has come more cleanups for the existing extension hooks of GIC in the pipeline, but they are going to be 3.20 material" * 'irq-irqdomain-arm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (22 commits) irqchip: gicv3-its: Fix ITT allocation irqchip: gicv3-its: Move some alloc/free code to activate/deactivate irqchip: gicv3-its: Fix domain free in multi-MSI case irqchip: gic: Remove warning by including linux/irqdomain.h irqchip: gic-v2m: Add DT bindings for GICv2m irqchip: gic-v2m: Add support for ARM GICv2m MSI(-X) doorbell irqchip: mtk-sysirq: dt-bindings: Add bindings for mediatek sysirq irqchip: mtk-sysirq: Add sysirq interrupt polarity support irqchip: gic: Support hierarchy irq domain. irqchip: GICv3: Binding updates for ITS irqchip: GICv3: ITS: enable compilation of the ITS driver irqchip: GICv3: ITS: plug ITS init into main GICv3 code irqchip: GICv3: ITS: DT probing and initialization irqchip: GICv3: ITS: MSI support irqchip: GICv3: ITS: device allocation and configuration irqchip: GICv3: ITS: tables allocators irqchip: GICv3: ITS: LPI allocator irqchip: GICv3: ITS: irqchip implementation irqchip: GICv3: ITS command queue irqchip: GICv3: rework redistributor structure ... | 16 December 2014, 01:30:09 UTC |
9b8ec91 | Linus Torvalds | 16 December 2014, 01:25:20 UTC | Merge branch 'for-linus' of git://git.kernel.dk/linux-block Pull core block fix from Jens Axboe: "Jan reported a problem this morning with a crash in blk-mq, and after looking over the recent changes, it's obvious that the blk-mq-tag waitqueue handling change is buggy. We could end up _not_ doing finish_wait() before switching to a new waitqueue, thus corrupting the wait task list" * 'for-linus' of git://git.kernel.dk/linux-block: Revert "blk-mq: Micro-optimize bt_get()" | 16 December 2014, 01:25:20 UTC |
27cb882 | Linus Torvalds | 16 December 2014, 01:07:58 UTC | Merge tag 'rpmsg-3.19-next' of git://git.kernel.org/pub/scm/linux/kernel/git/ohad/rpmsg Pull rpmsg update from Ohad Ben-Cohen: "A single patch from Suman Anna which makes rpmsg use less buffers when small vrings are being used" * tag 'rpmsg-3.19-next' of git://git.kernel.org/pub/scm/linux/kernel/git/ohad/rpmsg: rpmsg: use less buffers when vrings are small | 16 December 2014, 01:07:58 UTC |
988adfd | Linus Torvalds | 15 December 2014, 23:52:01 UTC | Merge branch 'drm-next' of git://people.freedesktop.org/~airlied/linux Pull drm updates from Dave Airlie: "Highlights: - AMD KFD driver merge This is the AMD HSA interface for exposing a lowlevel interface for GPGPU use. They have an open source userspace built on top of this interface, and the code looks as good as it was going to get out of tree. - Initial atomic modesetting work The need for an atomic modesetting interface to allow userspace to try and send a complete set of modesetting state to the driver has arisen, and been suffering from neglect this past year. No more, the start of the common code and changes for msm driver to use it are in this tree. Ongoing work to get the userspace ioctl finished and the code clean will probably wait until next kernel. - DisplayID 1.3 and tiled monitor exposed to userspace. Tiled monitor property is now exposed for userspace to make use of. - Rockchip drm driver merged. - imx gpu driver moved out of staging Other stuff: - core: panel - MIPI DSI + new panels. expose suggested x/y properties for virtual GPUs - i915: Initial Skylake (SKL) support gen3/4 reset work start of dri1/ums removal infoframe tracking fixes for lots of things. - nouveau: tegra k1 voltage support GM204 modesetting support GT21x memory reclocking work - radeon: CI dpm fixes GPUVM improvements Initial DPM fan control - rcar-du: HDMI support added removed some support for old boards slave encoder driver for Analog Devices adv7511 - exynos: Exynos4415 SoC support - msm: a4xx gpu support atomic helper conversion - tegra: iommu support universal plane support ganged-mode DSI support - sti: HDMI i2c improvements - vmwgfx: some late fixes. - qxl: use suggested x/y properties" * 'drm-next' of git://people.freedesktop.org/~airlied/linux: (969 commits) drm: sti: fix module compilation issue drm/i915: save/restore GMBUS freq across suspend/resume on gen4 drm: sti: correctly cleanup CRTC and planes drm: sti: add HQVDP plane drm: sti: add cursor plane drm: sti: enable auxiliary CRTC drm: sti: fix delay in VTG programming drm: sti: prepare sti_tvout to support auxiliary crtc drm: sti: use drm_crtc_vblank_{on/off} instead of drm_vblank_{on/off} drm: sti: fix hdmi avi infoframe drm: sti: remove event lock while disabling vblank drm: sti: simplify gdp code drm: sti: clear all mixer control drm: sti: remove gpio for HDMI hot plug detection drm: sti: allow to change hdmi ddc i2c adapter drm/doc: Document drm_add_modes_noedid() usage drm/i915: Remove '& 0xffff' from the mask given to WA_REG() drm/i915: Invert the mask and val arguments in wa_add() and WA_REG() drm: Zero out DRM object memory upon cleanup drm/i915/bdw: Fix the write setting up the WIZ hashing mode ... | 15 December 2014, 23:52:01 UTC |
26178ec | Linus Torvalds | 15 December 2014, 23:07:33 UTC | x86: mm: consolidate VM_FAULT_RETRY handling The VM_FAULT_RETRY handling was confusing and incorrect for the case of returning to kernel mode. We need to handle the exception table fixup if we return to kernel mode due to a fatal signal - it will basically look to the kernel user mode access like the access failed due to the VM going away from udner it. Which is correct - the process is dying - and avoids the whole "repeat endless kernel page faults" case. Handling the VM_FAULT_RETRY early and in just one place also simplifies the mmap_sem handling, since once we've taken care of VM_FAULT_RETRY we know that we can just drop the lock. The remaining accounting and possible error handling is thread-local and does not need the mmap_sem. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 15 December 2014, 23:07:33 UTC |
7fb08ec | Linus Torvalds | 15 December 2014, 22:46:06 UTC | x86: mm: move mmap_sem unlock from mm_fault_error() to caller This replaces four copies in various stages of mm_fault_error() handling with just a single one. It will also allow for more natural placement of the unlocking after some further cleanup. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 15 December 2014, 22:46:06 UTC |
1888d2f | Kevin Hilman | 15 December 2014, 21:59:43 UTC | Merge tag 'omap-for-v3.19/fixes-for-merge-window' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into fixes From: Tony Lindgren <tony@atomide.com> Subject: [GIT PULL] few fixes for the v3.19 merge window Fixes for a few issues found that would be good to get into -rc1: - Update SoC revision detection for am43x es1.2 - Fix regression with GPMC timings on 2430sdp for some versions of u-boot - Fix dra7 watchdog compatible property - Fix am437x-sk-evm LCD timings - Fix dra7 DSS clock muxing - Fix dra7-evm voltages - Remove a unused function prototype for am33xx_clk_init - Enable AHCI in the omap2plus_defconfig * tag 'omap-for-v3.19/fixes-for-merge-window' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: (1601 commits) ARM: omap2plus_defconfig: Enable AHCI_PLATFORM driver ARM: dts: am437x-sk-evm.dts: fix LCD timings ARM: dts: dra7-evm: Update SMPS7 (VDD_CORE) max voltage to match DM ARM: dts: dra7-evm: Fix typo in SMPS6 (VDD_GPU) max voltage ARM: OMAP2+: AM43x: Add ID for ES1.2 ARM: dts: am437x-sk: fix lcd enable pin mux data ARM: dts: Fix gpmc regression for omap 2430sdp smc91x hwmon: (tmp401) Detect TMP435 on all addresses it supports mfd: rtsx: Add func to split u32 into register mmc: sdhci-msm: Convert to mmc_send_tuning() mmc: sdhci-esdhc-imx: Convert to mmc_send_tuning() mmc: core: Let mmc_send_tuning() to take struct mmc_host* as parameter nios2: Make NIOS2_CMDLINE_IGNORE_DTB depend on CMDLINE_BOOL nios2: Add missing NR_CPUS to Kconfig nios2: asm-offsets: Remove unused definition TI_TASK nios2: Remove write-only struct member from nios2_timer nios2: Remove unused extern declaration of shm_align_mask nios2: include linux/type.h in io.h nios2: move include asm-generic/io.h to end of file nios2: remove include asm-generic/iomap.h from io.h ... | 15 December 2014, 21:59:43 UTC |
9d312cd | Viresh Kumar | 15 December 2014, 04:18:19 UTC | ARM: defconfigs: use CONFIG_CPUFREQ_DT CONFIG_GENERIC_CPUFREQ_CPU0 disappeared with commit bbcf071969b20f ("cpufreq: cpu0: rename driver and internals to 'cpufreq_dt'") and some defconfigs are still using it instead of the new one. Use the renamed CONFIG_CPUFREQ_DT generic driver. Cc: <stable@vger.kernel.org> # 3.18 Reported-by: Nishanth Menon <nm@ti.com> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Kevin Hilman <khilman@linaro.org> | 15 December 2014, 18:47:47 UTC |
f1d04b2 | David Vrabel | 15 December 2014, 16:41:00 UTC | Merge branch 'devel/for-linus-3.19' into stable/for-linus-3.19 | 15 December 2014, 16:41:00 UTC |
35d37c6 | Jens Axboe | 15 December 2014, 15:30:26 UTC | Revert "blk-mq: Micro-optimize bt_get()" This reverts commit 52f7eb945f2ba62b324bb9ae16d945326a961dcf. The optimization is only really safe for a single queue, otherwise 'bs' and 'bt' can indeed change, and if we don't do a finish_wait() for each loop, we'll potentially change the wait structure and corrupt task wait list. Reported-by: Jan Kara <jack@suse.cz> | 15 December 2014, 15:30:26 UTC |
0daa230 | Steven Rostedt (Red Hat) | 13 December 2014, 03:27:10 UTC | tracing: Add tp_printk cmdline to have tracepoints go to printk() Add the kernel command line tp_printk option that will have tracepoints that are active sent to printk() as well as to the trace buffer. Passing "tp_printk" will activate this. To turn it off, the sysctl /proc/sys/kernel/tracepoint_printk can have '0' echoed into it. Note, this only works if the cmdline option is used. Echoing 1 into the sysctl file without the cmdline option will have no affect. Note, this is a dangerous option. Having high frequency tracepoints send their data to printk() can possibly cause a live lock. This is another reason why this is only active if the command line option is used. Link: http://lkml.kernel.org/r/alpine.DEB.2.11.1412121539300.16494@nanos Suggested-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Steven Rostedt <rostedt@goodmis.org> | 15 December 2014, 15:17:38 UTC |
5f893b2 | Steven Rostedt (Red Hat) | 13 December 2014, 01:05:10 UTC | tracing: Move enabling tracepoints to just after rcu_init() Enabling tracepoints at boot up can be very useful. The tracepoint can be initialized right after RCU has been. There's no need to wait for the early_initcall() to be called. That's too late for some things that can use tracepoints for debugging. Move the logic to enable tracepoints out of the initcalls and into init/main.c to right after rcu_init(). This also allows trace_printk() to be used early too. Link: http://lkml.kernel.org/r/alpine.DEB.2.11.1412121539300.16494@nanos Link: http://lkml.kernel.org/r/20141214164104.307127356@goodmis.org Reviewed-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Suggested-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Steven Rostedt <rostedt@goodmis.org> | 15 December 2014, 15:16:50 UTC |
f54e18f | Jan Kara | 15 December 2014, 13:22:46 UTC | isofs: Fix infinite looping over CE entries Rock Ridge extensions define so called Continuation Entries (CE) which define where is further space with Rock Ridge data. Corrupted isofs image can contain arbitrarily long chain of these, including a one containing loop and thus causing kernel to end in an infinite loop when traversing these entries. Limit the traversal to 32 entries which should be more than enough space to store all the Rock Ridge data. Reported-by: P J P <ppandit@redhat.com> CC: stable@vger.kernel.org Signed-off-by: Jan Kara <jack@suse.cz> | 15 December 2014, 14:53:26 UTC |
4e0cd68 | benjamin.gaignard@linaro.org | 13 December 2014, 06:59:31 UTC | drm: sti: fix module compilation issue When compiling in module some symbol aren't missing, export them correctly. Signed-off-by: Benjamin Gaignard <benjamin.gaignard@linaro.org> Signed-off-by: Dave Airlie <airlied@redhat.com> | 15 December 2014, 07:07:57 UTC |
67e2c38 | Linus Torvalds | 15 December 2014, 04:36:37 UTC | Merge branch 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security Pull security layer updates from James Morris: "In terms of changes, there's general maintenance to the Smack, SELinux, and integrity code. The IMA code adds a new kconfig option, IMA_APPRAISE_SIGNED_INIT, which allows IMA appraisal to require signatures. Support for reading keys from rootfs before init is call is also added" * 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security: (23 commits) selinux: Remove security_ops extern security: smack: fix out-of-bounds access in smk_parse_smack() VFS: refactor vfs_read() ima: require signature based appraisal integrity: provide a hook to load keys when rootfs is ready ima: load x509 certificate from the kernel integrity: provide a function to load x509 certificate from the kernel integrity: define a new function integrity_read_file() Security: smack: replace kzalloc with kmem_cache for inode_smack Smack: Lock mode for the floor and hat labels ima: added support for new kernel cmdline parameter ima_template_fmt ima: allocate field pointers array on demand in template_desc_init_fields() ima: don't allocate a copy of template_fmt in template_desc_init_fields() ima: display template format in meas. list if template name length is zero ima: added error messages to template-related functions ima: use atomic bit operations to protect policy update interface ima: ignore empty and with whitespaces policy lines ima: no need to allocate entry for comment ima: report policy load status ima: use path names cache ... | 15 December 2014, 04:36:37 UTC |
6ae840e | Linus Torvalds | 15 December 2014, 00:43:47 UTC | Merge tag 'char-misc-3.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char/misc driver updates from Greg KH: "Here's the big char/misc driver update for 3.19-rc1 Lots of little things all over the place in different drivers, and a new subsystem, "coresight" has been added. Full details are in the shortlog" * tag 'char-misc-3.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (73 commits) parport: parport_pc, do not remove parent devices early spmi: Remove shutdown/suspend/resume kernel-doc carma-fpga-program: drop videobuf dependency carma-fpga: drop videobuf dependency carma-fpga-program.c: fix compile errors i8k: Fix temperature bug handling in i8k_get_temp() cxl: Name interrupts in /proc/interrupt CXL: Return error to PSL if IRQ demultiplexing fails & print clearer warning coresight-replicator: remove .owner field for driver coresight: fixed comments in coresight.h coresight: fix typo in comment in coresight-priv.h coresight: bindings for coresight drivers coresight: Adding ABI documentation w1: support auto-load of w1_bq27000 module. w1: avoid potential u16 overflow cn: verify msg->len before making callback mei: export fw status registers through sysfs mei: read and print all six FW status registers mei: txe: add cherrytrail device id mei: kill cached host and me csr values ... | 15 December 2014, 00:43:47 UTC |
e6b5be2 | Linus Torvalds | 15 December 2014, 00:10:09 UTC | Merge tag 'driver-core-3.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core update from Greg KH: "Here's the set of driver core patches for 3.19-rc1. They are dominated by the removal of the .owner field in platform drivers. They touch a lot of files, but they are "simple" changes, just removing a line in a structure. Other than that, a few minor driver core and debugfs changes. There are some ath9k patches coming in through this tree that have been acked by the wireless maintainers as they relied on the debugfs changes. Everything has been in linux-next for a while" * tag 'driver-core-3.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (324 commits) Revert "ath: ath9k: use debugfs_create_devm_seqfile() helper for seq_file entries" fs: debugfs: add forward declaration for struct device type firmware class: Deletion of an unnecessary check before the function call "vunmap" firmware loader: fix hung task warning dump devcoredump: provide a one-way disable function device: Add dev_<level>_once variants ath: ath9k: use debugfs_create_devm_seqfile() helper for seq_file entries ath: use seq_file api for ath9k debugfs files debugfs: add helper function to create device related seq_file drivers/base: cacheinfo: remove noisy error boot message Revert "core: platform: add warning if driver has no owner" drivers: base: support cpu cache information interface to userspace via sysfs drivers: base: add cpu_device_create to support per-cpu devices topology: replace custom attribute macros with standard DEVICE_ATTR* cpumask: factor out show_cpumap into separate helper function driver core: Fix unbalanced device reference in drivers_probe driver core: fix race with userland in device_add() sysfs/kernfs: make read requests on pre-alloc files use the buffer. sysfs/kernfs: allow attributes to request write buffer be pre-allocated. fs: sysfs: return EGBIG on write if offset is larger than file size ... | 15 December 2014, 00:10:09 UTC |
37da7bb | Linus Torvalds | 14 December 2014, 23:23:32 UTC | Merge tag 'tty-3.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty Pull tty/serial driver updates from Greg KH: "Here's the big tty/serial driver update for 3.19-rc1. There are a number of TTY core changes/fixes in here from Peter Hurley that have all been teted in linux-next for a long time now. There are also the normal serial driver updates as well, full details in the changelog below" * tag 'tty-3.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (219 commits) serial: pxa: hold port.lock when reporting modem line changes tty-hvsi_lib: Deletion of an unnecessary check before the function call "tty_kref_put" tty: Deletion of unnecessary checks before two function calls n_tty: Fix read_buf race condition, increment read_head after pushing data serial: of-serial: add PM suspend/resume support Revert "serial: of-serial: add PM suspend/resume support" Revert "serial: of-serial: fix up PM ops on no_console_suspend and port type" serial: 8250: don't attempt a trylock if in sysrq serial: core: Add big-endian iotype serial: samsung: use port->fifosize instead of hardcoded values serial: samsung: prefer to use fifosize from driver data serial: samsung: fix style problems serial: samsung: wait for transfer completion before clock disable serial: icom: fix error return code serial: tegra: clean up tty-flag assignments serial: Fix io address assign flow with Fintek PCI-to-UART Product serial: mxs-auart: fix tx_empty against shift register serial: mxs-auart: fix gpio change detection on interrupt serial: mxs-auart: Fix mxs_auart_set_ldisc() serial: 8250_dw: Use 64-bit access for OCTEON. ... | 14 December 2014, 23:23:32 UTC |
e7cf773 | Linus Torvalds | 14 December 2014, 22:57:16 UTC | Merge tag 'usb-3.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB updates from Greg KH: "Here's the big set of USB and PHY patches for 3.19-rc1. The normal churn in the USB gadget area is in here, as well as xhci and other individual USB driver updates. The PHY tree is also in here, as there were dependancies on the USB tree. All of these have been in linux-next" * tag 'usb-3.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (351 commits) arm: omap3: twl: remove usb phy init data usbip: fix error handling in stub_probe() usb: gadget: udc: missing curly braces USB: mos7720: delete some unneeded code wusb: replace memset by memzero_explicit usbip: remove unneeded structure usb: xhci: fix comment for PORT_DEV_REMOVE xhci: don't use the same variable for stopped and halted rings current TD xhci: clear extra bits from slot context when setting max exit latency xhci: cleanup finish_td function USB: adutux: NULL dereferences on disconnect usb: chipidea: fix platform_no_drv_owner.cocci warnings usb: chipidea: Fixed a few typos in comments Documentation: bindings: add doc for the USB2 ChipIdea USB driver usb: chipidea: add a usb2 driver for ci13xxx usb: chipidea: fix phy handling usb: chipidea: remove duplicate dev_set_drvdata for host_start usb: chipidea: parameter 'mode' isn't needed for hw_device_reset usb: chipidea: add controller reset API usb: chipidea: remove flag CI_HDRC_REQUIRE_TRANSCEIVER ... | 14 December 2014, 22:57:16 UTC |
7a02d08 | Linus Torvalds | 14 December 2014, 22:42:53 UTC | Merge tag 'squashfs-updates' of git://git.kernel.org/pub/scm/linux/kernel/git/pkl/squashfs-next Pull squashfs update from Phillip Lougher: "These patches optionally add LZ4 compression support to Squashfs. LZ4 is a lightweight compression algorithm which can be used on embedded systems to reduce CPU and memory overhead (in comparison to the standard zlib compression). These patches add the wrapper code to allow Squashfs to use the existing LZ4 decompression code, and the necessary configuration option" * tag 'squashfs-updates' of git://git.kernel.org/pub/scm/linux/kernel/git/pkl/squashfs-next: Squashfs: Add LZ4 compression configuration option Squashfs: add LZ4 compression support | 14 December 2014, 22:42:53 UTC |
980f3c3 | Linus Torvalds | 14 December 2014, 22:05:05 UTC | Merge tag 'gpio-v3.19-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio Pull take two of the GPIO updates: "Same stuff as last time, now with a fixup patch for the previous compile error plus I ran a few extra rounds of compile-testing. This is the bulk of GPIO changes for the v3.19 series: - A new API that allows setting more than one GPIO at the time. This is implemented for the new descriptor-based API only and makes it possible to e.g. toggle a clock and data line at the same time, if the hardware can do this with a single register write. Both consumers and drivers need new calls, and the core will fall back to driving individual lines where needed. Implemented for the MPC8xxx driver initially - Patched the mdio-mux-gpio and the serial mctrl driver that drives modems to use the new multiple-setting API to set several signals simultaneously - Get rid of the global GPIO descriptor array, and instead allocate descriptors dynamically for each GPIO on a certain GPIO chip. This moves us closer to getting rid of the limitation of using the global, static GPIO numberspace - New driver and device tree bindings for 74xx ICs - New driver and device tree bindings for the VF610 Vybrid - Support the RCAR r8a7793 and r8a7794 - Guidelines for GPIO device tree bindings trying to get things a bit more strict with the advent of combined device properties - Suspend/resume support for the MVEBU driver - A slew of minor fixes and improvements" * tag 'gpio-v3.19-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: (33 commits) gpio: mcp23s08: fix up compilation error gpio: pl061: document gpio-ranges property for bindings file gpio: pl061: hook request if gpio-ranges avaiable gpio: mcp23s08: Add option to configure IRQ output polarity as active high gpio: fix deferred probe detection for legacy API serial: mctrl_gpio: use gpiod_set_array function mdio-mux-gpio: Use GPIO descriptor interface and new gpiod_set_array function gpio: remove const modifier from gpiod_get_direction() gpio: remove gpio_descs global array gpio: mxs: implement get_direction callback gpio: em: Use dynamic allocation of GPIOs gpio: Check if base is positive before calling gpio_is_valid() gpio: mcp23s08: Add simple IRQ support for SPI devices gpio: mcp23s08: request a shared interrupt gpio: mcp23s08: Do not free unrequested interrupt gpio: rcar: Add r8a7793 and r8a7794 support gpio-mpc8xxx: add mpc8xxx_gpio_set_multiple function gpiolib: allow simultaneous setting of multiple GPIO outputs gpio: mvebu: add suspend/resume support gpio: gpio-davinci: remove duplicate check on resource .. | 14 December 2014, 22:05:05 UTC |
7d22286 | Linus Torvalds | 14 December 2014, 21:36:57 UTC | Merge git://git.kvack.org/~bcrl/aio-next Pull aio updates from Benjamin LaHaise. * git://git.kvack.org/~bcrl/aio-next: aio: Skip timer for io_getevents if timeout=0 aio: Make it possible to remap aio ring | 14 December 2014, 21:36:57 UTC |
9689519 | Linus Torvalds | 14 December 2014, 20:54:40 UTC | Merge branch 'i2c/for-3.19' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux Pull i2c updates from Wolfram Sang: "For 3.19, the I2C subsystem has to offer special candy this time. Right in time for Christmas :) - I2C slave framework: finally, a generic mechanism for Linux being an I2C slave (if the bus driver supports that). Docs are still missing but will come later this cycle, the code is good enough to go. - I2C muxes represent their topology in sysfs much more detailed. This will help users to navigate around much easier. - irq population of i2c clients is now done at probe time, not device creation time, to have better support for deferred probing. - new drivers for Imagination SCB, Amlogic Meson - DMA support added for Freescale IMX, Renesas SHMobile - slightly bigger driver updates to OMAP, i801, AT91, and rk3x (mostly quirk handling, timing updates, and using better kernel interfaces) - eeprom driver can now write with byte-access (very slow, but OK to have) - and the bunch of smaller fixes, cleanups, ID updates..." * 'i2c/for-3.19' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (56 commits) i2c: sh_mobile: remove unneeded DMA mask i2c: rcar: add slave support i2c: slave-eeprom: add eeprom simulator driver i2c: core changes for slave support MAINTAINERS: add I2C dt bindings also to I2C realm i2c: designware: Fix falling time bindings doc i2c: davinci: switch to use platform_get_irq Documentation: i2c: Use PM ops instead of legacy suspend/resume i2c: sh_mobile: optimize irq entry i2c: pxa: add support for SCCB devices omap: i2c: don't check bus state IP rev3.3 and earlier i2c: s3c2410: Handle i2c sys_cfg register in i2c driver i2c: rk3x: add Kconfig dependency on COMMON_CLK i2c: omap: add notes related to i2c multimaster mode i2c: omap: don't reset controller if Arbitration Lost detected i2c: omap: implement workaround for handling invalid BB-bit values i2c: omap: cleanup register definitions i2c: rk3x: handle dynamic clock rate changes correctly i2c: at91: enable probe deferring on dma channel request i2c: at91: remove legacy DMA support ... | 14 December 2014, 20:54:40 UTC |
8fd9589 | Linus Torvalds | 14 December 2014, 20:13:05 UTC | Merge tag 'md/3.19' of git://neil.brown.name/md Pull md updates from Neil Brown: "Three fixes for md. I did have a largish set of locking changes queued, but late testing showed they weren't quite as stable as I thought and while I fixed what I found, I decided it safer to delay them a release ... particularly as I'll be AFK for a few weeks. So expect a larger batch next time :-)" * tag 'md/3.19' of git://neil.brown.name/md: md: Check MD_RECOVERY_RUNNING as well as ->sync_thread. md: fix semicolon.cocci warnings md/raid5: fetch_block must fetch all the blocks handle_stripe_dirtying wants. | 14 December 2014, 20:13:05 UTC |
536e89e | Linus Torvalds | 14 December 2014, 19:51:50 UTC | Merge branch 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fixes from Ingo Molnar: "Misc fixes (mainly Andy's TLS fixes), plus a cleanup" * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/tls: Disallow unusual TLS segments x86/tls: Validate TLS entries to protect espfix MAINTAINERS: Add me as x86 VDSO submaintainer x86/asm: Unify segment selector defines x86/asm: Guard against building the 32/64-bit versions of the asm-offsets*.c file directly x86_64, switch_to(): Load TLS descriptors before switching DS and ES x86/mm: Use min() instead of min_t() in the e820 printout code x86/mm: Fix zone ranges boot printout x86/doc: Update documentation after file shuffling | 14 December 2014, 19:51:50 UTC |
0e58af4 | Andy Lutomirski | 05 December 2014, 00:48:17 UTC | x86/tls: Disallow unusual TLS segments Users have no business installing custom code segments into the GDT, and segments that are not present but are otherwise valid are a historical source of interesting attacks. For completeness, block attempts to set the L bit. (Prior to this patch, the L bit would have been silently dropped.) This is an ABI break. I've checked glibc, musl, and Wine, and none of them look like they'll have any trouble. Note to stable maintainers: this is a hardening patch that fixes no known bugs. Given the possibility of ABI issues, this probably shouldn't be backported quickly. Signed-off-by: Andy Lutomirski <luto@amacapital.net> Acked-by: H. Peter Anvin <hpa@zytor.com> Cc: stable@vger.kernel.org # optional Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: security@kernel.org <security@kernel.org> Cc: Willy Tarreau <w@1wt.eu> Signed-off-by: Ingo Molnar <mingo@kernel.org> | 14 December 2014, 07:50:31 UTC |
41bdc78 | Andy Lutomirski | 05 December 2014, 00:48:16 UTC | x86/tls: Validate TLS entries to protect espfix Installing a 16-bit RW data segment into the GDT defeats espfix. AFAICT this will not affect glibc, Wine, or dosemu at all. Signed-off-by: Andy Lutomirski <luto@amacapital.net> Acked-by: H. Peter Anvin <hpa@zytor.com> Cc: stable@vger.kernel.org Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: security@kernel.org <security@kernel.org> Cc: Willy Tarreau <w@1wt.eu> Signed-off-by: Ingo Molnar <mingo@kernel.org> | 14 December 2014, 07:50:31 UTC |
f0905c5 | Andy Lutomirski | 13 December 2014, 00:25:47 UTC | MAINTAINERS: Add me as x86 VDSO submaintainer Here goes... :) Signed-off-by: Andy Lutomirski <luto@amacapital.net> Acked-by: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/1042001e502f8e0deb0edfeeac209b68378650cf.1418430292.git.luto@amacapital.net Signed-off-by: Ingo Molnar <mingo@kernel.org> | 14 December 2014, 07:47:22 UTC |
5f785de | Fam Zheng | 06 November 2014, 12:44:36 UTC | aio: Skip timer for io_getevents if timeout=0 In this case, it is basically a polling. Let's not involve timer at all because that would hurt performance for application event loops. In an arbitrary test I've done, io_getevents syscall elapsed time reduces from 50000+ nanoseconds to a few hundereds. Signed-off-by: Fam Zheng <famz@redhat.com> Signed-off-by: Benjamin LaHaise <bcrl@kvack.org> | 13 December 2014, 22:50:20 UTC |
e4a0d3e | Pavel Emelyanov | 18 September 2014, 15:56:17 UTC | aio: Make it possible to remap aio ring There are actually two issues this patch addresses. Let me start with the one I tried to solve in the beginning. So, in the checkpoint-restore project (criu) we try to dump tasks' state and restore one back exactly as it was. One of the tasks' state bits is rings set up with io_setup() call. There's (almost) no problems in dumping them, there's a problem restoring them -- if I dump a task with aio ring originally mapped at address A, I want to restore one back at exactly the same address A. Unfortunately, the io_setup() does not allow for that -- it mmaps the ring at whatever place mm finds appropriate (it calls do_mmap_pgoff() with zero address and without the MAP_FIXED flag). To make restore possible I'm going to mremap() the freshly created ring into the address A (under which it was seen before dump). The problem is that the ring's virtual address is passed back to the user-space as the context ID and this ID is then used as search key by all the other io_foo() calls. Reworking this ID to be just some integer doesn't seem to work, as this value is already used by libaio as a pointer using which this library accesses memory for aio meta-data. So, to make restore work we need to make sure that a) ring is mapped at desired virtual address b) kioctx->user_id matches this value Having said that, the patch makes mremap() on aio region update the kioctx's user_id and mmap_base values. Here appears the 2nd issue I mentioned in the beginning of this mail. If (regardless of the C/R dances I do) someone creates an io context with io_setup(), then mremap()-s the ring and then destroys the context, the kill_ioctx() routine will call munmap() on wrong (old) address. This will result in a) aio ring remaining in memory and b) some other vma get unexpectedly unmapped. What do you think? Signed-off-by: Pavel Emelyanov <xemul@parallels.com> Acked-by: Dmitry Monakhov <dmonakhov@openvz.org> Signed-off-by: Benjamin LaHaise <bcrl@kvack.org> | 13 December 2014, 22:49:50 UTC |
9ea18f8 | Linus Torvalds | 13 December 2014, 22:22:26 UTC | Merge branch 'for-3.19/drivers' of git://git.kernel.dk/linux-block Pull block layer driver updates from Jens Axboe: - NVMe updates: - The blk-mq conversion from Matias (and others) - A stack of NVMe bug fixes from the nvme tree, mostly from Keith. - Various bug fixes from me, fixing issues in both the blk-mq conversion and generic bugs. - Abort and CPU online fix from Sam. - Hot add/remove fix from Indraneel. - A couple of drbd fixes from the drbd team (Andreas, Lars, Philipp) - With the generic IO stat accounting from 3.19/core, converting md, bcache, and rsxx to use those. From Gu Zheng. - Boundary check for queue/irq mode for null_blk from Matias. Fixes cases where invalid values could be given, causing the device to hang. - The xen blkfront pull request, with two bug fixes from Vitaly. * 'for-3.19/drivers' of git://git.kernel.dk/linux-block: (56 commits) NVMe: fix race condition in nvme_submit_sync_cmd() NVMe: fix retry/error logic in nvme_queue_rq() NVMe: Fix FS mount issue (hot-remove followed by hot-add) NVMe: fix error return checking from blk_mq_alloc_request() NVMe: fix freeing of wrong request in abort path xen/blkfront: remove redundant flush_op xen/blkfront: improve protection against issuing unsupported REQ_FUA NVMe: Fix command setup on IO retry null_blk: boundary check queue_mode and irqmode block/rsxx: use generic io stats accounting functions to simplify io stat accounting md: use generic io stats accounting functions to simplify io stat accounting drbd: use generic io stats accounting functions to simplify io stat accounting md/bcache: use generic io stats accounting functions to simplify io stat accounting NVMe: Update module version major number NVMe: fail pci initialization if the device doesn't have any BARs NVMe: add ->exit_hctx() hook NVMe: make setup work for devices that don't do INTx NVMe: enable IO stats by default NVMe: nvme_submit_async_admin_req() must use atomic rq allocation NVMe: replace blk_put_request() with blk_mq_free_request() ... | 13 December 2014, 22:22:26 UTC |
caf292a | Linus Torvalds | 13 December 2014, 22:14:23 UTC | Merge branch 'for-3.19/core' of git://git.kernel.dk/linux-block Pull block driver core update from Jens Axboe: "This is the pull request for the core block IO changes for 3.19. Not a huge round this time, mostly lots of little good fixes: - Fix a bug in sysfs blktrace interface causing a NULL pointer dereference, when enabled/disabled through that API. From Arianna Avanzini. - Various updates/fixes/improvements for blk-mq: - A set of updates from Bart, mostly fixing buts in the tag handling. - Cleanup/code consolidation from Christoph. - Extend queue_rq API to be able to handle batching issues of IO requests. NVMe will utilize this shortly. From me. - A few tag and request handling updates from me. - Cleanup of the preempt handling for running queues from Paolo. - Prevent running of unmapped hardware queues from Ming Lei. - Move the kdump memory limiting check to be in the correct location, from Shaohua. - Initialize all software queues at init time from Takashi. This prevents a kobject warning when CPUs are brought online that weren't online when a queue was registered. - Single writeback fix for I_DIRTY clearing from Tejun. Queued with the core IO changes, since it's just a single fix. - Version X of the __bio_add_page() segment addition retry from Maurizio. Hope the Xth time is the charm. - Documentation fixup for IO scheduler merging from Jan. - Introduce (and use) generic IO stat accounting helpers for non-rq drivers, from Gu Zheng. - Kill off artificial limiting of max sectors in a request from Christoph" * 'for-3.19/core' of git://git.kernel.dk/linux-block: (26 commits) bio: modify __bio_add_page() to accept pages that don't start a new segment blk-mq: Fix uninitialized kobject at CPU hotplugging blktrace: don't let the sysfs interface remove trace from running list blk-mq: Use all available hardware queues blk-mq: Micro-optimize bt_get() blk-mq: Fix a race between bt_clear_tag() and bt_get() blk-mq: Avoid that __bt_get_word() wraps multiple times blk-mq: Fix a use-after-free blk-mq: prevent unmapped hw queue from being scheduled blk-mq: re-check for available tags after running the hardware queue blk-mq: fix hang in bt_get() blk-mq: move the kdump check to blk_mq_alloc_tag_set blk-mq: cleanup tag free handling blk-mq: use 'nr_cpu_ids' as highest CPU ID count for hwq <-> cpu map blk: introduce generic io stat accounting help function blk-mq: handle the single queue case in blk_mq_hctx_next_cpu genhd: check for int overflow in disk_expand_part_tbl() blk-mq: add blk_mq_free_hctx_request() blk-mq: export blk_mq_free_request() blk-mq: use get_cpu/put_cpu instead of preempt_disable/preempt_enable ... | 13 December 2014, 22:14:23 UTC |
8f4385d | Linus Torvalds | 13 December 2014, 22:04:41 UTC | Merge tag 'trace-seq-buf-3.19-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace Pull tracing fixlet from Steven Rostedt: "Remove unnecessary preempt_disable in printk()" * tag 'trace-seq-buf-3.19-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: printk: Do not disable preemption for accessing printk_func | 13 December 2014, 22:04:41 UTC |
52bb452 | Linus Torvalds | 13 December 2014, 22:01:11 UTC | Merge tag 'trace-fixes-v3.18' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace Pull tracing fixes from Steven Rostedt: "Here's two fixes: 1) Discovered by Fengguang Wu's tests. I changed the parameters to the function graph x86 prepare_ftrace_return call but forgot to update the call from entry_32 (i386 version). This patch corrects that. 2) I was tracing some code and found that the sched_switch tracepoint was showing tasks in the INTERRUPTIBLE state as RUNNING. This was due to the updates to convert preempt_count into a per_cpu variable. The tracepoint logic was made to use the tasks saved_preempt_count which could hold a stale "PREEMPT_ACTIVE", instead of using the current preempt_count() call" * tag 'trace-fixes-v3.18' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: tracing/sched: Check preempt_count() for current when reading task->state ftrace/x86: Update i386 call to prepare_ftrace_return() | 13 December 2014, 22:01:11 UTC |
a99abce | Linus Torvalds | 13 December 2014, 21:41:28 UTC | Merge branch 'upstream' of git://git.infradead.org/users/pcmoore/audit Pull audit updates from Paul Moore: "Two small patches from the audit next branch; only one of which has any real significant code changes, the other is simply a MAINTAINERS update for audit. The single code patch is pretty small and rather straightforward, it changes the audit "version" number reported to userspace from an integer to a bitmap which is used to indicate the functionality of the running kernel. This really doesn't have much impact on the kernel, but it will make life easier for the audit userspace folks. Thankfully we were still on a version number which allowed us to do this without breaking userspace" * 'upstream' of git://git.infradead.org/users/pcmoore/audit: audit: convert status version to a feature bitmap audit: add Paul Moore to the MAINTAINERS entry | 13 December 2014, 21:41:28 UTC |
e3aa91a | Linus Torvalds | 13 December 2014, 21:33:26 UTC | Merge git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6 Pull crypto update from Herbert Xu: - The crypto API is now documented :) - Disallow arbitrary module loading through crypto API. - Allow get request with empty driver name through crypto_user. - Allow speed testing of arbitrary hash functions. - Add caam support for ctr(aes), gcm(aes) and their derivatives. - nx now supports concurrent hashing properly. - Add sahara support for SHA1/256. - Add ARM64 version of CRC32. - Misc fixes. * git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (77 commits) crypto: tcrypt - Allow speed testing of arbitrary hash functions crypto: af_alg - add user space interface for AEAD crypto: qat - fix problem with coalescing enable logic crypto: sahara - add support for SHA1/256 crypto: sahara - replace tasklets with kthread crypto: sahara - add support for i.MX53 crypto: sahara - fix spinlock initialization crypto: arm - replace memset by memzero_explicit crypto: powerpc - replace memset by memzero_explicit crypto: sha - replace memset by memzero_explicit crypto: sparc - replace memset by memzero_explicit crypto: algif_skcipher - initialize upon init request crypto: algif_skcipher - removed unneeded code crypto: algif_skcipher - Fixed blocking recvmsg crypto: drbg - use memzero_explicit() for clearing sensitive data crypto: drbg - use MODULE_ALIAS_CRYPTO crypto: include crypto- module prefix in template crypto: user - add MODULE_ALIAS crypto: sha-mb - remove a bogus NULL check crytpo: qat - Fix 64 bytes requests ... | 13 December 2014, 21:33:26 UTC |
78a45c6 | Linus Torvalds | 13 December 2014, 21:00:36 UTC | Merge branch 'akpm' (second patch-bomb from Andrew) Merge second patchbomb from Andrew Morton: - the rest of MM - misc fs fixes - add execveat() syscall - new ratelimit feature for fault-injection - decompressor updates - ipc/ updates - fallocate feature creep - fsnotify cleanups - a few other misc things * emailed patches from Andrew Morton <akpm@linux-foundation.org>: (99 commits) cgroups: Documentation: fix trivial typos and wrong paragraph numberings parisc: percpu: update comments referring to __get_cpu_var percpu: update local_ops.txt to reflect this_cpu operations percpu: remove __get_cpu_var and __raw_get_cpu_var macros fsnotify: remove destroy_list from fsnotify_mark fsnotify: unify inode and mount marks handling fallocate: create FAN_MODIFY and IN_MODIFY events mm/cma: make kmemleak ignore CMA regions slub: fix cpuset check in get_any_partial slab: fix cpuset check in fallback_alloc shmdt: use i_size_read() instead of ->i_size ipc/shm.c: fix overly aggressive shmdt() when calls span multiple segments ipc/msg: increase MSGMNI, remove scaling ipc/sem.c: increase SEMMSL, SEMMNI, SEMOPM ipc/sem.c: change memory barrier in sem_lock() to smp_rmb() lib/decompress.c: consistency of compress formats for kernel image decompress_bunzip2: off by one in get_next_block() usr/Kconfig: make initrd compression algorithm selection not expert fault-inject: add ratelimit option ratelimit: add initialization macro ... | 13 December 2014, 21:00:36 UTC |
29d293b | SeongJae Park | 13 December 2014, 00:58:50 UTC | cgroups: Documentation: fix trivial typos and wrong paragraph numberings Signed-off-by: SeongJae Park <sj38.park@gmail.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Tejun Heo <tj@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 13 December 2014, 20:42:53 UTC |
6ddb798 | Christoph Lameter | 13 December 2014, 00:58:47 UTC | parisc: percpu: update comments referring to __get_cpu_var __get_cpu_var was removed. Update comments to refer to this_cpu_ptr() instead. Signed-off-by: Christoph Lameter <cl@linux.com> Cc: "James E.J. Bottomley" <James.Bottomley@HansenPartnership.com> Cc: Tejun Heo <tj@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 13 December 2014, 20:42:53 UTC |
7d94a82 | Christoph Lameter | 13 December 2014, 00:58:45 UTC | percpu: update local_ops.txt to reflect this_cpu operations Update the documentation to reflect changes due to the availability of this_cpu operations. Signed-off-by: Christoph Lameter <cl@linux.com> Cc: Tejun Heo <tj@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 13 December 2014, 20:42:53 UTC |
6c51ec4 | Christoph Lameter | 13 December 2014, 00:58:42 UTC | percpu: remove __get_cpu_var and __raw_get_cpu_var macros No user is left in the kernel source tree. Therefore we can drop the definitions. This is the final merge of the transition away from __get_cpu_var. After this patch the kernel will not build if anyone uses __get_cpu_var. Signed-off-by: Christoph Lameter <cl@linux.com> Cc: Tejun Heo <tj@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 13 December 2014, 20:42:53 UTC |
37d469e | Jan Kara | 13 December 2014, 00:58:39 UTC | fsnotify: remove destroy_list from fsnotify_mark destroy_list is used to track marks which still need waiting for srcu period end before they can be freed. However by the time mark is added to destroy_list it isn't in group's list of marks anymore and thus we can reuse fsnotify_mark->g_list for queueing into destroy_list. This saves two pointers for each fsnotify_mark. Signed-off-by: Jan Kara <jack@suse.cz> Cc: Eric Paris <eparis@redhat.com> Cc: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 13 December 2014, 20:42:53 UTC |
0809ab6 | Jan Kara | 13 December 2014, 00:58:36 UTC | fsnotify: unify inode and mount marks handling There's a lot of common code in inode and mount marks handling. Factor it out to a common helper function. Signed-off-by: Jan Kara <jack@suse.cz> Cc: Eric Paris <eparis@redhat.com> Cc: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 13 December 2014, 20:42:53 UTC |
820c12d | Heinrich Schuchardt | 13 December 2014, 00:58:34 UTC | fallocate: create FAN_MODIFY and IN_MODIFY events The fanotify and the inotify API can be used to monitor changes of the file system. System call fallocate() modifies files. Hence it should trigger the corresponding fanotify (FAN_MODIFY) and inotify (IN_MODIFY) events. The most interesting case is FALLOC_FL_COLLAPSE_RANGE because this value allows to create arbitrary file content from random data. This patch adds the missing call to fsnotify_modify(). The FAN_MODIFY and IN_MODIFY event will be created when fallocate() succeeds. It will even be created if the file length remains unchanged, e.g. when calling fanotify with flag FALLOC_FL_KEEP_SIZE. This logic was primarily chosen to keep the coding simple. It resembles the logic of the write() system call. When we call write() we always create a FAN_MODIFY event, even in the case of overwriting with identical data. Events FAN_MODIFY and IN_MODIFY do not provide any guarantee that data was actually changed. Furthermore even if if the filesize remains unchanged, fallocate() may influence whether a subsequent write() will succeed and hence the fallocate() call may be considered a modification. The fallocate(2) man page teaches: After a successful call, subsequent writes into the range specified by offset and len are guaranteed not to fail because of lack of disk space. So calling fallocate(fd, FALLOC_FL_KEEP_SIZE, offset, len) may result in different outcomes of a subsequent write depending on the values of offset and len. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Reviewed-by: Jan Kara <jack@suse.cz> Cc: Jan Kara <jack@suse.cz> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Eric Paris <eparis@parisplace.org> Cc: John McCutchan <john@johnmccutchan.com> Cc: Robert Love <rlove@rlove.org> Cc: Michael Kerrisk <mtk.manpages@gmail.com> Cc: Theodore Ts'o <tytso@mit.edu> Cc: Dave Chinner <david@fromorbit.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 13 December 2014, 20:42:53 UTC |
620951e | Thierry Reding | 13 December 2014, 00:58:31 UTC | mm/cma: make kmemleak ignore CMA regions kmemleak will add allocations as objects to a pool. The memory allocated for each object in this pool is periodically searched for pointers to other allocated objects. This only works for memory that is mapped into the kernel's virtual address space, which happens not to be the case for most CMA regions. Furthermore, CMA regions are typically used to store data transferred to or from a device and therefore don't contain pointers to other objects. Without this, the kernel crashes on the first execution of the scan_gray_list() because it tries to access highmem. Perhaps a more appropriate fix would be to reject any object that can't map to a kernel virtual address? [akpm@linux-foundation.org: add comment] [akpm@linux-foundation.org: fix comment, per Catalin] [sfr@canb.auug.org.au: include linux/io.h for phys_to_virt()] Signed-off-by: Thierry Reding <treding@nvidia.com> Cc: Michal Nazarewicz <mina86@mina86.com> Cc: Marek Szyprowski <m.szyprowski@samsung.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: "Aneesh Kumar K.V" <aneesh.kumar@linux.vnet.ibm.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 13 December 2014, 20:42:53 UTC |
dee2f8a | Vladimir Davydov | 13 December 2014, 00:58:28 UTC | slub: fix cpuset check in get_any_partial If we fail to allocate from the current node's stock, we look for free objects on other nodes before calling the page allocator (see get_any_partial). While checking other nodes we respect cpuset constraints by calling cpuset_zone_allowed. We enforce hardwall check. As a result, we will fallback to the page allocator even if there are some pages cached on other nodes, but the current cpuset doesn't have them set. However, the page allocator uses softwall check for kernel allocations, so it may allocate from one of the other nodes in this case. Therefore we should use softwall cpuset check in get_any_partial to conform with the cpuset check in the page allocator. Signed-off-by: Vladimir Davydov <vdavydov@parallels.com> Acked-by: Zefan Li <lizefan@huawei.com> Acked-by: Christoph Lameter <cl@linux.com> Cc: Pekka Enberg <penberg@kernel.org> Cc: David Rientjes <rientjes@google.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Tejun Heo <tj@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 13 December 2014, 20:42:53 UTC |
061d707 | Vladimir Davydov | 13 December 2014, 00:58:25 UTC | slab: fix cpuset check in fallback_alloc fallback_alloc is called on kmalloc if the preferred node doesn't have free or partial slabs and there's no pages on the node's free list (GFP_THISNODE allocations fail). Before invoking the reclaimer it tries to locate a free or partial slab on other allowed nodes' lists. While iterating over the preferred node's zonelist it skips those zones which hardwall cpuset check returns false for. That means that for a task bound to a specific node using cpusets fallback_alloc will always ignore free slabs on other nodes and go directly to the reclaimer, which, however, may allocate from other nodes if cpuset.mem_hardwall is unset (default). As a result, we may get lists of free slabs grow without bounds on other nodes, which is bad, because inactive slabs are only evicted by cache_reap at a very slow rate and cannot be dropped forcefully. To reproduce the issue, run a process that will walk over a directory tree with lots of files inside a cpuset bound to a node that constantly experiences memory pressure. Look at num_slabs vs active_slabs growth as reported by /proc/slabinfo. To avoid this we should use softwall cpuset check in fallback_alloc. Signed-off-by: Vladimir Davydov <vdavydov@parallels.com> Acked-by: Zefan Li <lizefan@huawei.com> Acked-by: Christoph Lameter <cl@linux.com> Cc: Pekka Enberg <penberg@kernel.org> Cc: David Rientjes <rientjes@google.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Tejun Heo <tj@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 13 December 2014, 20:42:53 UTC |
07a46ed | Dave Hansen | 13 December 2014, 00:58:22 UTC | shmdt: use i_size_read() instead of ->i_size Andrew Morton noted http://lkml.kernel.org/r/20141104142027.a7a0d010772d84560b445f59@linux-foundation.org that the shmdt uses inode->i_size outside of i_mutex being held. There is one more case in shm.c in shm_destroy(). This converts both users over to use i_size_read(). Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com> Cc: Manfred Spraul <manfred@colorfullife.com> Cc: Davidlohr Bueso <dave@stgolabs.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 13 December 2014, 20:42:52 UTC |
d3c9790 | Dave Hansen | 13 December 2014, 00:58:19 UTC | ipc/shm.c: fix overly aggressive shmdt() when calls span multiple segments This is a highly-contrived scenario. But, a single shmdt() call can be induced in to unmapping memory from mulitple shm segments. Example code is here: http://www.sr71.net/~dave/intel/shmfun.c The fix is pretty simple: Record the 'struct file' for the first VMA we encounter and then stick to it. Decline to unmap anything not from the same file and thus the same segment. I found this by inspection and the odds of anyone hitting this in practice are pretty darn small. Lightly tested, but it's a pretty small patch. Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com> Cc: Manfred Spraul <manfred@colorfullife.com> Reviewed-by: Davidlohr Bueso <dave@stgolabs.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 13 December 2014, 20:42:52 UTC |
0050ee0 | Manfred Spraul | 13 December 2014, 00:58:17 UTC | ipc/msg: increase MSGMNI, remove scaling SysV can be abused to allocate locked kernel memory. For most systems, a small limit doesn't make sense, see the discussion with regards to SHMMAX. Therefore: increase MSGMNI to the maximum supported. And: If we ignore the risk of locking too much memory, then an automatic scaling of MSGMNI doesn't make sense. Therefore the logic can be removed. The code preserves auto_msgmni to avoid breaking any user space applications that expect that the value exists. Notes: 1) If an administrator must limit the memory allocations, then he can set MSGMNI as necessary. Or he can disable sysv entirely (as e.g. done by Android). 2) MSGMAX and MSGMNB are intentionally not increased, as these values are used to control latency vs. throughput: If MSGMNB is large, then msgsnd() just returns and more messages can be queued before a task switch to a task that calls msgrcv() is forced. [akpm@linux-foundation.org: coding-style fixes] Signed-off-by: Manfred Spraul <manfred@colorfullife.com> Cc: Davidlohr Bueso <dave@stgolabs.net> Cc: Rafael Aquini <aquini@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 13 December 2014, 20:42:52 UTC |
e843e7d | Manfred Spraul | 13 December 2014, 00:58:14 UTC | ipc/sem.c: increase SEMMSL, SEMMNI, SEMOPM a) SysV can be abused to allocate locked kernel memory. For most systems, a small limit doesn't make sense, see the discussion with regards to SHMMAX. Therefore: Increase the sysv sem limits so that all known applications will work with these defaults. b) With regards to the maximum supported: Some of the specified hard limits are not correct anymore, therefore the patch updates the documentation. - SEMMNI must stay below IPCMNI, which is 32768. As for SHMMAX: Stay a bit below this limit. - SEMMSL was limited to 8k, to ensure that the kmalloc for the kernel array was limited to 16 kB (order=2) This doesn't apply anymore: - the allocation size isn't sizeof(short)*nsems anymore. - ipc_alloc falls back to vmalloc - SEMOPM should stay below 1000, to limit the kmalloc in semtimedop() to an order=1 allocation. Therefore: Leave it at 500 (order=0 allocation). Note: If an administrator must limit the memory allocations, then he can set the values as necessary. Or he can disable sysv entirely (as e.g. done by Android). Signed-off-by: Manfred Spraul <manfred@colorfullife.com> Cc: Davidlohr Bueso <dave@stgolabs.net> Acked-by: Rafael Aquini <aquini@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 13 December 2014, 20:42:52 UTC |
2e094ab | Manfred Spraul | 13 December 2014, 00:58:11 UTC | ipc/sem.c: change memory barrier in sem_lock() to smp_rmb() When I fixed bugs in the sem_lock() logic, I was more conservative than necessary. Therefore it is safe to replace the smp_mb() with smp_rmb(). And: With smp_rmb(), semop() syscalls are up to 10% faster. The race we must protect against is: sem->lock is free sma->complex_count = 0 sma->sem_perm.lock held by thread B thread A: A: spin_lock(&sem->lock) B: sma->complex_count++; (now 1) B: spin_unlock(&sma->sem_perm.lock); A: spin_is_locked(&sma->sem_perm.lock); A: XXXXX memory barrier A: if (sma->complex_count == 0) Thread A must read the increased complex_count value, i.e. the read must not be reordered with the read of sem_perm.lock done by spin_is_locked(). Since it's about ordering of reads, smp_rmb() is sufficient. [akpm@linux-foundation.org: update sem_lock() comment, from Davidlohr] Signed-off-by: Manfred Spraul <manfred@colorfullife.com> Reviewed-by: Davidlohr Bueso <dave@stgolabs.net> Acked-by: Rafael Aquini <aquini@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 13 December 2014, 20:42:52 UTC |
a060bfe | Haesung Kim | 13 December 2014, 00:58:08 UTC | lib/decompress.c: consistency of compress formats for kernel image Magic number of compress formats for kernel image is defined by two bytes. These numbers are written in hexadecimal number, nevertheless magic number for only gunzip is written in octal number. The formats should be consistent for readability. Therefore, magic numbers for gunzip are also defined by hexadecimal number. Signed-off-by: Haesung Kim <matia.kim@lge.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 13 December 2014, 20:42:52 UTC |
b5c8afe | Dan Carpenter | 13 December 2014, 00:58:05 UTC | decompress_bunzip2: off by one in get_next_block() "origPtr" is used as an offset into the bd->dbuf[] array. That array is allocated in start_bunzip() and has "bd->dbufSize" number of elements so the test here should be >= instead of >. Later we check "origPtr" again before using it as an offset so I don't know if this bug can be triggered in real life. Fixes: bc22c17e12c1 ('bzip2/lzma: library support for gzip, bzip2 and lzma decompression') Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Cc: Alain Knaff <alain@knaff.lu> Cc: Yinghai Lu <yinghai@kernel.org> Cc: "H. Peter Anvin" <hpa@zytor.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 13 December 2014, 20:42:52 UTC |
ec72c66 | Andi Kleen | 13 December 2014, 00:58:03 UTC | usr/Kconfig: make initrd compression algorithm selection not expert The kernel has support for (nearly) every compression algorithm known to man, each to handle some particular microscopic niche. Unfortunately all of these always get compiled in if you want to support INITRDs, and can be only disabled when CONFIG_EXPERT is set. I don't see why I need to set EXPERT just to properly configure the initrd compression algorithms, and not always include every possible algorithm Usually the initrd is just compressed with gzip anyways, at least that's true on all distributions I use. Remove the dependencies for initrd compression on CONFIG_EXPERT. Make the various options just default y, which should be good enough to not break any previous configuration. Signed-off-by: Andi Kleen <ak@linux.intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 13 December 2014, 20:42:52 UTC |
6adc4a2 | Dmitry Monakhov | 13 December 2014, 00:58:00 UTC | fault-inject: add ratelimit option Current debug levels are not optimal. Especially if one want to provoke big numbers of faults(broken device simulator) then any verbose level will produce giant numbers of identical logging messages. Let's add ratelimit parameter for that purpose. Signed-off-by: Dmitry Monakhov <dmonakhov@openvz.org> Acked-by: Akinobu Mita <akinobu.mita@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 13 December 2014, 20:42:52 UTC |
89e3f90 | Dmitry Monakhov | 13 December 2014, 00:57:57 UTC | ratelimit: add initialization macro Signed-off-by: Dmitry Monakhov <dmonakhov@openvz.org> Cc: Akinobu Mita <akinobu.mita@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 13 December 2014, 20:42:52 UTC |
92cab82 | Fabian Frederick | 13 December 2014, 00:57:55 UTC | fs/affs/file.c: remove obsolete pagesize check linux kernel doesn't manage page sizes below 4kb. Signed-off-by: Fabian Frederick <fabf@skynet.be> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 13 December 2014, 20:42:52 UTC |
9abb408 | Fabian Frederick | 13 December 2014, 00:57:52 UTC | fs/affs/file.c: add support to O_DIRECT Based on ext2_direct_IO Tested with O_DIRECT file open and sysbench/mariadb with 1% written queries improvement (update_non_index test) on a volume created with mkaffs. Signed-off-by: Fabian Frederick <fabf@skynet.be> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 13 December 2014, 20:42:51 UTC |
1ee54b0 | Fabian Frederick | 13 December 2014, 00:57:49 UTC | fs/affs/amigaffs.c: use va_format instead of buffer/vnsprintf -Remove ErrorBuffer and use %pV -Add __printf to enable argument mistmatch warnings Original patch by Joe Perches. Signed-off-by: Fabian Frederick <fabf@skynet.be> Cc: Joe Perches <joe@perches.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 13 December 2014, 20:42:51 UTC |
7633978 | Fabian Frederick | 13 December 2014, 00:57:47 UTC | fs/affs/file.c: forward declaration clean-up -Move file_operations to avoid forward declarations. -Remove unused declarations. Signed-off-by: Fabian Frederick <fabf@skynet.be> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 13 December 2014, 20:42:51 UTC |
957e3fa | Riku Voipio | 13 December 2014, 00:57:44 UTC | gcov: enable GCOV_PROFILE_ALL from ARCH Kconfigs Following the suggestions from Andrew Morton and Stephen Rothwell, Dont expand the ARCH list in kernel/gcov/Kconfig. Instead, define a ARCH_HAS_GCOV_PROFILE_ALL bool which architectures can enable. set ARCH_HAS_GCOV_PROFILE_ALL on Architectures where it was previously allowed + ARM64 which I tested. Signed-off-by: Riku Voipio <riku.voipio@linaro.org> Cc: Peter Oberparleiter <oberpar@linux.vnet.ibm.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 13 December 2014, 20:42:51 UTC |
d539395 | Masanari Iida | 13 December 2014, 00:57:41 UTC | kexec: remove unnecessary KERN_ERR from kexec.c Remove unnecessary KERN_ERR from pr_err() within kexec.c. Signed-off-by: Masanari Iida <standby24x7@gmail.com> Acked-by: Vivek Goyal <vgoyal@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 13 December 2014, 20:42:51 UTC |
38351a3 | David Drysdale | 13 December 2014, 00:57:39 UTC | sparc: hook up execveat system call Signed-off-by: David Drysdale <drysdale@google.com> Acked-by: David S. Miller <davem@davemloft.net> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 13 December 2014, 20:42:51 UTC |
c9b26b8 | David Drysdale | 13 December 2014, 00:57:36 UTC | syscalls: add selftest for execveat(2) Signed-off-by: David Drysdale <drysdale@google.com> Cc: Meredydd Luff <meredydd@senatehouse.org> Cc: Shuah Khan <shuah.kh@samsung.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Kees Cook <keescook@chromium.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Rich Felker <dalias@aerifal.cx> Cc: Christoph Hellwig <hch@infradead.org> Cc: Michael Kerrisk <mtk.manpages@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 13 December 2014, 20:42:51 UTC |
27d6ec7 | David Drysdale | 13 December 2014, 00:57:33 UTC | x86: hook up execveat system call Hook up x86-64, i386 and x32 ABIs. Signed-off-by: David Drysdale <drysdale@google.com> Cc: Meredydd Luff <meredydd@senatehouse.org> Cc: Shuah Khan <shuah.kh@samsung.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Kees Cook <keescook@chromium.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Rich Felker <dalias@aerifal.cx> Cc: Christoph Hellwig <hch@infradead.org> Cc: Michael Kerrisk <mtk.manpages@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 13 December 2014, 20:42:51 UTC |
51f39a1 | David Drysdale | 13 December 2014, 00:57:29 UTC | syscalls: implement execveat() system call This patchset adds execveat(2) for x86, and is derived from Meredydd Luff's patch from Sept 2012 (https://lkml.org/lkml/2012/9/11/528). The primary aim of adding an execveat syscall is to allow an implementation of fexecve(3) that does not rely on the /proc filesystem, at least for executables (rather than scripts). The current glibc version of fexecve(3) is implemented via /proc, which causes problems in sandboxed or otherwise restricted environments. Given the desire for a /proc-free fexecve() implementation, HPA suggested (https://lkml.org/lkml/2006/7/11/556) that an execveat(2) syscall would be an appropriate generalization. Also, having a new syscall means that it can take a flags argument without back-compatibility concerns. The current implementation just defines the AT_EMPTY_PATH and AT_SYMLINK_NOFOLLOW flags, but other flags could be added in future -- for example, flags for new namespaces (as suggested at https://lkml.org/lkml/2006/7/11/474). Related history: - https://lkml.org/lkml/2006/12/27/123 is an example of someone realizing that fexecve() is likely to fail in a chroot environment. - http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=514043 covered documenting the /proc requirement of fexecve(3) in its manpage, to "prevent other people from wasting their time". - https://bugzilla.redhat.com/show_bug.cgi?id=241609 described a problem where a process that did setuid() could not fexecve() because it no longer had access to /proc/self/fd; this has since been fixed. This patch (of 4): Add a new execveat(2) system call. execveat() is to execve() as openat() is to open(): it takes a file descriptor that refers to a directory, and resolves the filename relative to that. In addition, if the filename is empty and AT_EMPTY_PATH is specified, execveat() executes the file to which the file descriptor refers. This replicates the functionality of fexecve(), which is a system call in other UNIXen, but in Linux glibc it depends on opening "/proc/self/fd/<fd>" (and so relies on /proc being mounted). The filename fed to the executed program as argv[0] (or the name of the script fed to a script interpreter) will be of the form "/dev/fd/<fd>" (for an empty filename) or "/dev/fd/<fd>/<filename>", effectively reflecting how the executable was found. This does however mean that execution of a script in a /proc-less environment won't work; also, script execution via an O_CLOEXEC file descriptor fails (as the file will not be accessible after exec). Based on patches by Meredydd Luff. Signed-off-by: David Drysdale <drysdale@google.com> Cc: Meredydd Luff <meredydd@senatehouse.org> Cc: Shuah Khan <shuah.kh@samsung.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Kees Cook <keescook@chromium.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Rich Felker <dalias@aerifal.cx> Cc: Christoph Hellwig <hch@infradead.org> Cc: Michael Kerrisk <mtk.manpages@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 13 December 2014, 20:42:51 UTC |
c0ef0cc | Namjae Jeon | 13 December 2014, 00:57:26 UTC | fat: fix data past EOF resulting from fsx testsuite When running FSX with direct I/O mode, fsx resulted in DATA past EOF issues. fsx ./file2 -Z -r 4096 -w 4096 ... .. truncating to largest ever: 0x907c fallocating to largest ever: 0x11137 truncating to largest ever: 0x2c6fe truncating to largest ever: 0x2cfdf fallocating to largest ever: 0x40000 Mapped Read: non-zero data past EOF (0x18628) page offset 0x629 is 0x2a4e ... .. The reason being, it is doing a truncate down, but the zeroing does not happen on the last block boundary when offset is not aligned. Even though it calls truncate_setsize()->truncate_inode_pages()-> truncate_inode_pages_range() and considers the partial zeroout but it retrieves the page using find_lock_page() - which only looks the page in the cache. So, zeroing out does not happen in case of direct IO. Make a truncate page based around block_truncate_page for FAT filesystem and invoke that helper to zerout in case the offset is not aligned with the blocksize. Signed-off-by: Namjae Jeon <namjae.jeon@samsung.com> Signed-off-by: Amit Sahrawat <a.sahrawat@samsung.com> Acked-by: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 13 December 2014, 20:42:51 UTC |
f441ada | Jan Kara | 13 December 2014, 00:57:24 UTC | befs: remove dead code Coverity id: 1042674 Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 13 December 2014, 20:42:51 UTC |
1dd61aa | Heesub Shin | 13 December 2014, 00:57:21 UTC | mm/zbud: init user ops only when it is needed When zbud is initialized through the zpool wrapper, pool->ops which points to user-defined operations is always set regardless of whether it is specified from the upper layer. This causes zbud_reclaim_page() to iterate its loop for evicting pool pages out without any gain. This patch sets the user-defined ops only when it is needed, so that zbud_reclaim_page() can bail out the reclamation loop earlier if there is no user-defined operations specified. Signed-off-by: Heesub Shin <heesub.shin@samsung.com> Acked-by: Dan Streetman <ddstreet@ieee.org> Cc: Seth Jennings <sjennings@variantweb.net> Cc: Sunae Seo <sunae.seo@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 13 December 2014, 20:42:51 UTC |
442cc43 | Markus Elfring | 13 December 2014, 00:57:18 UTC | mm/zswap: delete unnecessary check before calling free_percpu() free_percpu() tests whether its argument is NULL and then returns immediately. Thus the test around the call is not needed. This issue was detected by using the Coccinelle software. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Cc: Seth Jennings <sjennings@variantweb.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 13 December 2014, 20:42:50 UTC |
dd01d7d | Mahendran Ganesh | 13 December 2014, 00:57:15 UTC | mm/zswap: add __init to some functions in zswap zswap_cpu_init/zswap_comp_exit/zswap_entry_cache_create is only called by __init init_zswap() Signed-off-by: Mahendran Ganesh <opensource.ganesh@gmail.com> Cc: Seth Jennings <sjennings@variantweb.net> Cc: Dan Streetman <ddstreet@ieee.org> Cc: Minchan Kim <minchan@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 13 December 2014, 20:42:50 UTC |
083914e | Ganesh Mahendran | 13 December 2014, 00:57:13 UTC | zram: use DEVICE_ATTR_[RW|RO|WO] to define zram sys device attribute In current zram, we use DEVICE_ATTR() to define sys device attributes. SO, we need to set (S_IRUGO | S_IWUSR) permission and other arguments manually. Linux already provids the macro DEVICE_ATTR_[RW|RO|WO] to define sys device attribute. It is simple and readable. This patch uses kernel defined macro DEVICE_ATTR_[RW|RO|WO] to define zram device attribute. Signed-off-by: Ganesh Mahendran <opensource.ganesh@gmail.com> Acked-by: Jerome Marchand <jmarchan@redhat.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Nitin Gupta <ngupta@vflare.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 13 December 2014, 20:42:50 UTC |