Revision 624f5ab8720b3371367327a822c267699c1823b8 authored by Eric Biggers on 07 November 2017, 22:29:02 UTC, committed by James Morris on 08 November 2017, 13:38:21 UTC
syzkaller reported a NULL pointer dereference in asn1_ber_decoder(). It can be reproduced by the following command, assuming CONFIG_PKCS7_TEST_KEY=y: keyctl add pkcs7_test desc '' @s The bug is that if the data buffer is empty, an integer underflow occurs in the following check: if (unlikely(dp >= datalen - 1)) goto data_overrun_error; This results in the NULL data pointer being dereferenced. Fix it by checking for 'datalen - dp < 2' instead. Also fix the similar check for 'dp >= datalen - n' later in the same function. That one possibly could result in a buffer overread. The NULL pointer dereference was reproducible using the "pkcs7_test" key type but not the "asymmetric" key type because the "asymmetric" key type checks for a 0-length payload before calling into the ASN.1 decoder but the "pkcs7_test" key type does not. The bug report was: BUG: unable to handle kernel NULL pointer dereference at (null) IP: asn1_ber_decoder+0x17f/0xe60 lib/asn1_decoder.c:233 PGD 7b708067 P4D 7b708067 PUD 7b6ee067 PMD 0 Oops: 0000 [#1] SMP Modules linked in: CPU: 0 PID: 522 Comm: syz-executor1 Not tainted 4.14.0-rc8 #7 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.3-20171021_125229-anatol 04/01/2014 task: ffff9b6b3798c040 task.stack: ffff9b6b37970000 RIP: 0010:asn1_ber_decoder+0x17f/0xe60 lib/asn1_decoder.c:233 RSP: 0018:ffff9b6b37973c78 EFLAGS: 00010216 RAX: 0000000000000000 RBX: 0000000000000000 RCX: 000000000000021c RDX: ffffffff814a04ed RSI: ffffb1524066e000 RDI: ffffffff910759e0 RBP: ffff9b6b37973d60 R08: 0000000000000001 R09: ffff9b6b3caa4180 R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000002 R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000 FS: 00007f10ed1f2700(0000) GS:ffff9b6b3ea00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000000 CR3: 000000007b6f3000 CR4: 00000000000006f0 Call Trace: pkcs7_parse_message+0xee/0x240 crypto/asymmetric_keys/pkcs7_parser.c:139 verify_pkcs7_signature+0x33/0x180 certs/system_keyring.c:216 pkcs7_preparse+0x41/0x70 crypto/asymmetric_keys/pkcs7_key_type.c:63 key_create_or_update+0x180/0x530 security/keys/key.c:855 SYSC_add_key security/keys/keyctl.c:122 [inline] SyS_add_key+0xbf/0x250 security/keys/keyctl.c:62 entry_SYSCALL_64_fastpath+0x1f/0xbe RIP: 0033:0x4585c9 RSP: 002b:00007f10ed1f1bd8 EFLAGS: 00000216 ORIG_RAX: 00000000000000f8 RAX: ffffffffffffffda RBX: 00007f10ed1f2700 RCX: 00000000004585c9 RDX: 0000000020000000 RSI: 0000000020008ffb RDI: 0000000020008000 RBP: 0000000000000000 R08: ffffffffffffffff R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000216 R12: 00007fff1b2260ae R13: 00007fff1b2260af R14: 00007f10ed1f2700 R15: 0000000000000000 Code: dd ca ff 48 8b 45 88 48 83 e8 01 4c 39 f0 0f 86 a8 07 00 00 e8 53 dd ca ff 49 8d 46 01 48 89 85 58 ff ff ff 48 8b 85 60 ff ff ff <42> 0f b6 0c 30 89 c8 88 8d 75 ff ff ff 83 e0 1f 89 8d 28 ff ff RIP: asn1_ber_decoder+0x17f/0xe60 lib/asn1_decoder.c:233 RSP: ffff9b6b37973c78 CR2: 0000000000000000 Fixes: 42d5ec27f873 ("X.509: Add an ASN.1 decoder") Reported-by: syzbot <syzkaller@googlegroups.com> Cc: <stable@vger.kernel.org> # v3.7+ Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: James Morris <james.l.morris@oracle.com>
1 parent fbc3edf
decodecode
#!/bin/sh
# SPDX-License-Identifier: GPL-2.0
# Disassemble the Code: line in Linux oopses
# usage: decodecode < oops.file
#
# options: set env. variable AFLAGS=options to pass options to "as";
# e.g., to decode an i386 oops on an x86_64 system, use:
# AFLAGS=--32 decodecode < 386.oops
cleanup() {
rm -f $T $T.s $T.o $T.oo $T.aa $T.dis
exit 1
}
die() {
echo "$@"
exit 1
}
trap cleanup EXIT
T=`mktemp` || die "cannot create temp file"
code=
while read i ; do
case "$i" in
*Code:*)
code=$i
;;
esac
done
if [ -z "$code" ]; then
rm $T
exit
fi
echo $code
code=`echo $code | sed -e 's/.*Code: //'`
width=`expr index "$code" ' '`
width=$((($width-1)/2))
case $width in
1) type=byte ;;
2) type=2byte ;;
4) type=4byte ;;
esac
disas() {
${CROSS_COMPILE}as $AFLAGS -o $1.o $1.s > /dev/null 2>&1
if [ "$ARCH" = "arm" ]; then
if [ $width -eq 2 ]; then
OBJDUMPFLAGS="-M force-thumb"
fi
${CROSS_COMPILE}strip $1.o
fi
${CROSS_COMPILE}objdump $OBJDUMPFLAGS -S $1.o | \
grep -v "/tmp\|Disassembly\|\.text\|^$" > $1.dis 2>&1
}
marker=`expr index "$code" "\<"`
if [ $marker -eq 0 ]; then
marker=`expr index "$code" "\("`
fi
touch $T.oo
if [ $marker -ne 0 ]; then
echo All code >> $T.oo
echo ======== >> $T.oo
beforemark=`echo "$code"`
echo -n " .$type 0x" > $T.s
echo $beforemark | sed -e 's/ /,0x/g; s/[<>()]//g' >> $T.s
disas $T
cat $T.dis >> $T.oo
rm -f $T.o $T.s $T.dis
# and fix code at-and-after marker
code=`echo "$code" | cut -c$((${marker} + 1))-`
fi
echo Code starting with the faulting instruction > $T.aa
echo =========================================== >> $T.aa
code=`echo $code | sed -e 's/ [<(]/ /;s/[>)] / /;s/ /,0x/g; s/[>)]$//'`
echo -n " .$type 0x" > $T.s
echo $code >> $T.s
disas $T
cat $T.dis >> $T.aa
# (lines of whole $T.oo) - (lines of $T.aa, i.e. "Code starting") + 3,
# i.e. the title + the "===..=" line (sed is counting from 1, 0 address is
# special)
faultlinenum=$(( $(wc -l $T.oo | cut -d" " -f1) - \
$(wc -l $T.aa | cut -d" " -f1) + 3))
faultline=`cat $T.dis | head -1 | cut -d":" -f2-`
faultline=`echo "$faultline" | sed -e 's/\[/\\\[/g; s/\]/\\\]/g'`
cat $T.oo | sed -e "${faultlinenum}s/^\(.*:\)\(.*\)/\1\*\2\t\t<-- trapping instruction/"
echo
cat $T.aa
cleanup
![swh spinner](/static/img/swh-spinner.gif)
Computing file changes ...