Revision 6287fa53962a88881be5b5b8939491c384e0bdd2 authored by Dr. Stephen Henson on 07 January 2009, 10:50:54 UTC, committed by Dr. Stephen Henson on 07 January 2009, 10:50:54 UTC
1 parent a00c3c4
Makefile.org
##
## Makefile for OpenSSL
##
VERSION=
MAJOR=
MINOR=
SHLIB_VERSION_NUMBER=
SHLIB_VERSION_HISTORY=
SHLIB_MAJOR=
SHLIB_MINOR=
SHLIB_EXT=
PLATFORM=dist
OPTIONS=
CONFIGURE_ARGS=
SHLIB_TARGET=
# HERE indicates where this Makefile lives. This can be used to indicate
# where sub-Makefiles are expected to be. Currently has very limited usage,
# and should probably not be bothered with at all.
HERE=.
# INSTALL_PREFIX is for package builders so that they can configure
# for, say, /usr/ and yet have everything installed to /tmp/somedir/usr/.
# Normally it is left empty.
INSTALL_PREFIX=
INSTALLTOP=/usr/local/ssl
# Do not edit this manually. Use Configure --openssldir=DIR do change this!
OPENSSLDIR=/usr/local/ssl
# NO_IDEA - Define to build without the IDEA algorithm
# NO_RC4 - Define to build without the RC4 algorithm
# NO_RC2 - Define to build without the RC2 algorithm
# THREADS - Define when building with threads, you will probably also need any
# system defines as well, i.e. _REENTERANT for Solaris 2.[34]
# TERMIO - Define the termio terminal subsystem, needed if sgtty is missing.
# TERMIOS - Define the termios terminal subsystem, Silicon Graphics.
# LONGCRYPT - Define to use HPUX 10.x's long password modification to crypt(3).
# DEVRANDOM - Give this the value of the 'random device' if your OS supports
# one. 32 bytes will be read from this when the random
# number generator is initalised.
# SSL_FORBID_ENULL - define if you want the server to be not able to use the
# NULL encryption ciphers.
#
# LOCK_DEBUG - turns on lots of lock debug output :-)
# REF_CHECK - turn on some xyz_free() assertions.
# REF_PRINT - prints some stuff on structure free.
# CRYPTO_MDEBUG - turns on my 'memory leak' detecting stuff
# MFUNC - Make all Malloc/Free/Realloc calls call
# CRYPTO_malloc/CRYPTO_free/CRYPTO_realloc which can be setup to
# call application defined callbacks via CRYPTO_set_mem_functions()
# MD5_ASM needs to be defined to use the x86 assembler for MD5
# SHA1_ASM needs to be defined to use the x86 assembler for SHA1
# RMD160_ASM needs to be defined to use the x86 assembler for RIPEMD160
# Do not define B_ENDIAN or L_ENDIAN if 'unsigned long' == 8. It must
# equal 4.
# PKCS1_CHECK - pkcs1 tests.
CC= cc
CFLAG= -O
DEPFLAG=
PEX_LIBS=
EX_LIBS=
EXE_EXT=
ARFLAGS=
AR=ar $(ARFLAGS) r
ARD=ar $(ARFLAGS) d
RANLIB= ranlib
PERL= perl
TAR= tar
TARFLAGS= --no-recursion
MAKEDEPPROG=makedepend
# We let the C compiler driver to take care of .s files. This is done in
# order to be excused from maintaining a separate set of architecture
# dependent assembler flags. E.g. if you throw -mcpu=ultrasparc at SPARC
# gcc, then the driver will automatically translate it to -xarch=v8plus
# and pass it down to assembler.
AS=$(CC) -c
ASFLAG=$(CFLAG)
# For x86 assembler: Set PROCESSOR to 386 if you want to support
# the 80386.
PROCESSOR=
# CPUID module collects small commonly used assembler snippets
CPUID_OBJ=
BN_ASM= bn_asm.o
DES_ENC= des_enc.o fcrypt_b.o
AES_ASM_OBJ=aes_core.o aes_cbc.o
BF_ENC= bf_enc.o
CAST_ENC= c_enc.o
RC4_ENC= rc4_enc.o
RC5_ENC= rc5_enc.o
MD5_ASM_OBJ=
SHA1_ASM_OBJ=
RMD160_ASM_OBJ=
# KRB5 stuff
KRB5_INCLUDES=
LIBKRB5=
# Zlib stuff
ZLIB_INCLUDE=
LIBZLIB=
# This is the location of fipscanister.o and friends.
# The FIPS module build will place it $(INSTALLTOP)/lib
# but since $(INSTALLTOP) can only take the default value
# when the module is built it will be in /usr/local/ssl/lib
# $(INSTALLTOP) for this build make be different so hard
# code the path.
FIPSLIBDIR=/usr/local/ssl/lib/
# This is set to "y" if fipscanister.o is compiled internally as
# opposed to coming from an external validated location.
FIPSCANISTERINTERNAL=n
# The location of the library which contains fipscanister.o
# normally it will be libcrypto unless fipsdso is set in which
# case it will be libfips. If not compiling in FIPS mode at all
# this is empty making it a useful test for a FIPS compile.
FIPSCANLIB=
# Shared library base address. Currently only used on Windows.
#
BASEADDR=
DIRS= crypto fips ssl engines apps test tools
SHLIBDIRS= crypto ssl fips
# dirs in crypto to build
SDIRS= \
objects \
md2 md4 md5 sha mdc2 hmac ripemd \
des aes rc2 rc4 rc5 idea bf cast camellia seed \
bn ec rsa dsa ecdsa dh ecdh dso engine \
buffer bio stack lhash rand err \
evp asn1 pem x509 x509v3 conf txt_db pkcs7 pkcs12 comp ocsp ui krb5 \
store cms pqueue jpake
# keep in mind that the above list is adjusted by ./Configure
# according to no-xxx arguments...
# tests to perform. "alltests" is a special word indicating that all tests
# should be performed.
TESTS = alltests
MAKEFILE= Makefile
MANDIR=$(OPENSSLDIR)/man
MAN1=1
MAN3=3
MANSUFFIX=
SHELL=/bin/sh
TOP= .
ONEDIRS=out tmp
EDIRS= times doc bugs util include certs ms shlib mt demos perl sf dep VMS
WDIRS= windows
LIBS= libcrypto.a libssl.a
SHARED_CRYPTO=libcrypto$(SHLIB_EXT)
SHARED_SSL=libssl$(SHLIB_EXT)
SHARED_FIPS=
SHARED_LIBS=
SHARED_LIBS_LINK_EXTS=
SHARED_LDFLAGS=
GENERAL= Makefile
BASENAME= openssl
NAME= $(BASENAME)-$(VERSION)
TARFILE= $(NAME).tar
WTARFILE= $(NAME)-win.tar
EXHEADER= e_os2.h
HEADER= e_os.h
all: Makefile build_all openssl.pc libssl.pc libcrypto.pc
# as we stick to -e, CLEARENV ensures that local variables in lower
# Makefiles remain local and variable. $${VAR+VAR} is tribute to Korn
# shell, which [annoyingly enough] terminates unset with error if VAR
# is not present:-( TOP= && unset TOP is tribute to HP-UX /bin/sh,
# which terminates unset with error if no variable was present:-(
CLEARENV= TOP= && unset TOP $${LIB+LIB} $${LIBS+LIBS} \
$${INCLUDE+INCLUDE} $${INCLUDES+INCLUDES} \
$${DIR+DIR} $${DIRS+DIRS} $${SRC+SRC} \
$${LIBSRC+LIBSRC} $${LIBOBJ+LIBOBJ} $${ALL+ALL} \
$${EXHEADER+EXHEADER} $${HEADER+HEADER} \
$${GENERAL+GENERAL} $${CFLAGS+CFLAGS} \
$${ASFLAGS+ASFLAGS} $${AFLAGS+AFLAGS} \
$${LDCMD+LDCMD} $${LDFLAGS+LDFLAGS} \
$${SHAREDCMD+SHAREDCMD} $${SHAREDFLAGS+SHAREDFLAGS} \
$${SHARED_LIB+SHARED_LIB} $${LIBEXTRAS+LIBEXTRAS}
BUILDENV= PLATFORM='${PLATFORM}' PROCESSOR='${PROCESSOR}' \
CC='${CC}' CFLAG='${CFLAG}' \
AS='${CC}' ASFLAG='${CFLAG} -c' \
AR='${AR}' PERL='${PERL}' RANLIB='${RANLIB}' \
SDIRS='${SDIRS}' LIBRPATH='${INSTALLTOP}/lib' \
INSTALL_PREFIX='${INSTALL_PREFIX}' \
INSTALLTOP='${INSTALLTOP}' OPENSSLDIR='${OPENSSLDIR}' \
MAKEDEPEND='$$$${TOP}/util/domd $$$${TOP} -MD ${MAKEDEPPROG}' \
DEPFLAG='-DOPENSSL_NO_DEPRECATED ${DEPFLAG}' \
MAKEDEPPROG='${MAKEDEPPROG}' \
SHARED_LDFLAGS='${SHARED_LDFLAGS}' \
KRB5_INCLUDES='${KRB5_INCLUDES}' LIBKRB5='${LIBKRB5}' \
EXE_EXT='${EXE_EXT}' SHARED_LIBS='${SHARED_LIBS}' \
SHLIB_EXT='${SHLIB_EXT}' SHLIB_TARGET='${SHLIB_TARGET}' \
PEX_LIBS='${PEX_LIBS}' EX_LIBS='${EX_LIBS}' \
CPUID_OBJ='${CPUID_OBJ}' \
BN_ASM='${BN_ASM}' DES_ENC='${DES_ENC}' \
AES_ASM_OBJ='${AES_ASM_OBJ}' \
BF_ENC='${BF_ENC}' CAST_ENC='${CAST_ENC}' \
RC4_ENC='${RC4_ENC}' RC5_ENC='${RC5_ENC}' \
SHA1_ASM_OBJ='${SHA1_ASM_OBJ}' \
MD5_ASM_OBJ='${MD5_ASM_OBJ}' \
RMD160_ASM_OBJ='${RMD160_ASM_OBJ}' \
FIPSLIBDIR='${FIPSLIBDIR}' \
FIPSCANLIB="$${FIPSCANLIB:-$(FIPSCANLIB)}" \
FIPSCANISTERINTERNAL='${FIPSCANISTERINTERNAL}' \
FIPS_EX_OBJ='${FIPS_EX_OBJ}' \
THIS=$${THIS:-$@} MAKEFILE=Makefile MAKEOVERRIDES=
# MAKEOVERRIDES= effectively "equalizes" GNU-ish and SysV-ish make flavors,
# which in turn eliminates ambiguities in variable treatment with -e.
# BUILD_CMD is a generic macro to build a given target in a given
# subdirectory. The target must be given through the shell variable
# `target' and the subdirectory to build in must be given through `dir'.
# This macro shouldn't be used directly, use RECURSIVE_BUILD_CMD or
# BUILD_ONE_CMD instead.
#
# BUILD_ONE_CMD is a macro to build a given target in a given
# subdirectory if that subdirectory is part of $(DIRS). It requires
# exactly the same shell variables as BUILD_CMD.
#
# RECURSIVE_BUILD_CMD is a macro to build a given target in all
# subdirectories defined in $(DIRS). It requires that the target
# is given through the shell variable `target'.
BUILD_CMD= if [ -d "$$dir" ]; then \
( [ $$target != all -a -z "$(FIPSCANLIB)" ] && FIPSCANLIB=/dev/null; \
cd $$dir && echo "making $$target in $$dir..." && \
$(CLEARENV) && $(MAKE) -e $(BUILDENV) TOP=.. DIR=$$dir $$target \
) || exit 1; \
fi
RECURSIVE_BUILD_CMD=for dir in $(DIRS); do $(BUILD_CMD); done
BUILD_ONE_CMD=\
if echo " $(DIRS) " | grep " $$dir " >/dev/null 2>/dev/null; then \
$(BUILD_CMD); \
fi
reflect:
@[ -n "$(THIS)" ] && $(CLEARENV) && $(MAKE) $(THIS) -e $(BUILDENV)
FIPS_EX_OBJ= ../crypto/aes/aes_cfb.o \
../crypto/aes/aes_ecb.o \
../crypto/aes/aes_ofb.o \
../crypto/bn/bn_add.o \
../crypto/bn/bn_blind.o \
../crypto/bn/bn_ctx.o \
../crypto/bn/bn_div.o \
../crypto/bn/bn_exp2.o \
../crypto/bn/bn_exp.o \
../crypto/bn/bn_gcd.o \
../crypto/bn/bn_lib.o \
../crypto/bn/bn_mod.o \
../crypto/bn/bn_mont.o \
../crypto/bn/bn_mul.o \
../crypto/bn/bn_prime.o \
../crypto/bn/bn_rand.o \
../crypto/bn/bn_recp.o \
../crypto/bn/bn_shift.o \
../crypto/bn/bn_sqr.o \
../crypto/bn/bn_word.o \
../crypto/bn/bn_x931p.o \
../crypto/buffer/buf_str.o \
../crypto/cryptlib.o \
../crypto/des/cfb64ede.o \
../crypto/des/cfb64enc.o \
../crypto/des/cfb_enc.o \
../crypto/des/ecb3_enc.o \
../crypto/des/ecb_enc.o \
../crypto/des/ofb64ede.o \
../crypto/des/ofb64enc.o \
../crypto/des/fcrypt.o \
../crypto/des/set_key.o \
../crypto/dsa/dsa_utl.o \
../crypto/dsa/dsa_sign.o \
../crypto/dsa/dsa_vrf.o \
../crypto/err/err.o \
../crypto/evp/digest.o \
../crypto/evp/enc_min.o \
../crypto/evp/e_aes.o \
../crypto/evp/e_des3.o \
../crypto/evp/p_sign.o \
../crypto/evp/p_verify.o \
../crypto/mem_clr.o \
../crypto/mem.o \
../crypto/rand/md_rand.o \
../crypto/rand/rand_egd.o \
../crypto/rand/randfile.o \
../crypto/rand/rand_lib.o \
../crypto/rand/rand_os2.o \
../crypto/rand/rand_unix.o \
../crypto/rand/rand_win.o \
../crypto/rsa/rsa_lib.o \
../crypto/rsa/rsa_none.o \
../crypto/rsa/rsa_oaep.o \
../crypto/rsa/rsa_pk1.o \
../crypto/rsa/rsa_pss.o \
../crypto/rsa/rsa_ssl.o \
../crypto/rsa/rsa_x931.o \
../crypto/sha/sha1dgst.o \
../crypto/sha/sha256.o \
../crypto/sha/sha512.o \
../crypto/uid.o
sub_all: build_all
build_all: build_libs build_apps build_tests build_tools
build_libs: build_crypto build_fips build_ssl build_shared build_engines
build_crypto:
if [ -n "$(FIPSCANLIB)" ]; then \
EXCL_OBJ='$(AES_ASM_OBJ) $(BN_ASM) $(DES_ENC) $(CPUID_OBJ) $(SHA1_ASM_OBJ) $(FIPS_EX_OBJ)' ; export EXCL_OBJ ; \
ARX='$(PERL) $${TOP}/util/arx.pl $(AR)' ; \
else \
ARX='${AR}' ; \
fi ; export ARX ; \
dir=crypto; target=all; $(BUILD_ONE_CMD)
build_fips:
@dir=fips; target=all; [ -z "$(FIPSCANLIB)" ] || $(BUILD_ONE_CMD)
build_ssl:
@dir=ssl; target=all; $(BUILD_ONE_CMD)
build_engines:
@dir=engines; target=all; $(BUILD_ONE_CMD)
build_apps:
@dir=apps; target=all; $(BUILD_ONE_CMD)
build_tests:
@dir=test; target=all; $(BUILD_ONE_CMD)
build_tools:
@dir=tools; target=all; $(BUILD_ONE_CMD)
all_testapps: build_libs build_testapps
build_testapps:
@dir=crypto; target=testapps; $(BUILD_ONE_CMD)
build_shared: $(SHARED_LIBS)
libcrypto$(SHLIB_EXT): libcrypto.a $(SHARED_FIPS)
@if [ "$(SHLIB_TARGET)" != "" ]; then \
if [ "$(FIPSCANLIB)" = "libfips" ]; then \
$(ARD) libcrypto.a fipscanister.o ; \
$(MAKE) SHLIBDIRS='crypto' SHLIBDEPS='-lfips' build-shared; \
$(AR) libcrypto.a fips/fipscanister.o ; \
else \
if [ "$(FIPSCANLIB)" = "libcrypto" ]; then \
FIPSLD_CC=$(CC); CC=fips/fipsld; \
export CC FIPSLD_CC; \
fi; \
$(MAKE) -e SHLIBDIRS='crypto' build-shared; \
fi \
else \
echo "There's no support for shared libraries on this platform" >&2; \
exit 1; \
fi
libssl$(SHLIB_EXT): libcrypto$(SHLIB_EXT) libssl.a
@if [ "$(SHLIB_TARGET)" != "" ]; then \
shlibdeps=-lcrypto; \
[ "$(FIPSCANLIB)" = "libfips" ] && shlibdeps="$$shlibdeps -lfips"; \
$(MAKE) SHLIBDIRS=ssl SHLIBDEPS="$$shlibdeps" build-shared; \
else \
echo "There's no support for shared libraries on this platform" >&2 ; \
exit 1; \
fi
fips/fipscanister.o: build_fips
libfips$(SHLIB_EXT): fips/fipscanister.o
@if [ "$(SHLIB_TARGET)" != "" ]; then \
FIPSLD_CC=$(CC); CC=fips/fipsld; export CC FIPSLD_CC; \
$(MAKE) -f Makefile.shared -e $(BUILDENV) \
CC=$${CC} LIBNAME=fips THIS=$@ \
LIBEXTRAS=fips/fipscanister.o \
LIBDEPS="$(EX_LIBS)" \
LIBVERSION=${SHLIB_MAJOR}.${SHLIB_MINOR} \
link_o.$(SHLIB_TARGET) || { rm -f $@; exit 1; } \
else \
echo "There's no support for shared libraries on this platform" >&2; \
exit 1; \
fi
libfips.a:
dir=fips; target=all; $(BUILD_ONE_CMD)
clean-shared:
@set -e; for i in $(SHLIBDIRS); do \
if [ -n "$(SHARED_LIBS_LINK_EXTS)" ]; then \
tmp="$(SHARED_LIBS_LINK_EXTS)"; \
for j in $${tmp:-x}; do \
( set -x; rm -f lib$$i$$j ); \
done; \
fi; \
( set -x; rm -f lib$$i$(SHLIB_EXT) ); \
if [ "$(PLATFORM)" = "Cygwin" ]; then \
( set -x; rm -f cyg$$i$(SHLIB_EXT) lib$$i$(SHLIB_EXT).a ); \
fi; \
done
link-shared:
@ set -e; for i in ${SHLIBDIRS}; do \
$(MAKE) -f $(HERE)/Makefile.shared -e $(BUILDENV) \
LIBNAME=$$i LIBVERSION=${SHLIB_MAJOR}.${SHLIB_MINOR} \
LIBCOMPATVERSIONS=";${SHLIB_VERSION_HISTORY}" \
symlink.$(SHLIB_TARGET); \
libs="$$libs -l$$i"; \
done
build-shared: do_$(SHLIB_TARGET) link-shared
do_$(SHLIB_TARGET):
@ set -e; libs='-L. ${SHLIBDEPS}'; for i in ${SHLIBDIRS}; do \
if [ "${SHLIBDIRS}" = "ssl" -a -n "$(LIBKRB5)" ]; then \
libs="$(LIBKRB5) $$libs"; \
fi; \
$(CLEARENV) && $(MAKE) -f Makefile.shared -e $(BUILDENV) \
LIBNAME=$$i LIBVERSION=${SHLIB_MAJOR}.${SHLIB_MINOR} \
LIBCOMPATVERSIONS=";${SHLIB_VERSION_HISTORY}" \
LIBDEPS="$$libs $(EX_LIBS)" \
link_a.$(SHLIB_TARGET); \
libs="-l$$i $$libs"; \
done
libcrypto.pc: Makefile
@ ( echo 'prefix=$(INSTALLTOP)'; \
echo 'exec_prefix=$${prefix}'; \
echo 'libdir=$${exec_prefix}/lib'; \
echo 'includedir=$${prefix}/include'; \
echo ''; \
echo 'Name: OpenSSL-libcrypto'; \
echo 'Description: OpenSSL cryptography library'; \
echo 'Version: '$(VERSION); \
echo 'Requires: '; \
echo 'Libs: -L$${libdir} -lcrypto $(EX_LIBS)'; \
echo 'Cflags: -I$${includedir} $(KRB5_INCLUDES)' ) > libcrypto.pc
libssl.pc: Makefile
@ ( echo 'prefix=$(INSTALLTOP)'; \
echo 'exec_prefix=$${prefix}'; \
echo 'libdir=$${exec_prefix}/lib'; \
echo 'includedir=$${prefix}/include'; \
echo ''; \
echo 'Name: OpenSSL'; \
echo 'Description: Secure Sockets Layer and cryptography libraries'; \
echo 'Version: '$(VERSION); \
echo 'Requires: '; \
echo 'Libs: -L$${libdir} -lssl -lcrypto $(EX_LIBS)'; \
echo 'Cflags: -I$${includedir} $(KRB5_INCLUDES)' ) > libssl.pc
openssl.pc: Makefile
@ ( echo 'prefix=$(INSTALLTOP)'; \
echo 'exec_prefix=$${prefix}'; \
echo 'libdir=$${exec_prefix}/lib'; \
echo 'includedir=$${prefix}/include'; \
echo ''; \
echo 'Name: OpenSSL'; \
echo 'Description: Secure Sockets Layer and cryptography libraries and tools'; \
echo 'Version: '$(VERSION); \
echo 'Requires: '; \
echo 'Libs: -L$${libdir} -lssl -lcrypto $(EX_LIBS)'; \
echo 'Cflags: -I$${includedir} $(KRB5_INCLUDES)' ) > openssl.pc
Makefile: Makefile.org Configure config
@echo "Makefile is older than Makefile.org, Configure or config."
@echo "Reconfigure the source tree (via './config' or 'perl Configure'), please."
@false
libclean:
rm -f *.map *.so *.so.* *.dll engines/*.so engines/*.dll *.a engines/*.a */lib */*/lib
clean: libclean
rm -f shlib/*.o *.o core a.out fluff rehash.time testlog make.log cctest cctest.c
@set -e; target=clean; $(RECURSIVE_BUILD_CMD)
rm -f $(LIBS)
rm -f openssl.pc libssl.pc libcrypto.pc
rm -f speed.* .pure
rm -f $(TARFILE)
@set -e; for i in $(ONEDIRS) ;\
do \
rm -fr $$i/*; \
done
makefile.one: files
$(PERL) util/mk1mf.pl >makefile.one; \
sh util/do_ms.sh
files:
$(PERL) $(TOP)/util/files.pl Makefile > $(TOP)/MINFO
@set -e; target=files; $(RECURSIVE_BUILD_CMD)
links:
@$(PERL) $(TOP)/util/mkdir-p.pl include/openssl
@$(PERL) $(TOP)/util/mklink.pl include/openssl $(EXHEADER)
@set -e; target=links; $(RECURSIVE_BUILD_CMD)
gentests:
@(cd test && echo "generating dummy tests (if needed)..." && \
$(CLEARENV) && $(MAKE) -e $(BUILDENV) TESTS='${TESTS}' OPENSSL_DEBUG_MEMORY=on generate );
dclean:
rm -f *.bak
@set -e; target=dclean; $(RECURSIVE_BUILD_CMD)
rehash: rehash.time
rehash.time: certs
@(OPENSSL="`pwd`/util/opensslwrap.sh"; \
OPENSSL_DEBUG_MEMORY=on; \
export OPENSSL OPENSSL_DEBUG_MEMORY; \
$(PERL) tools/c_rehash certs)
touch rehash.time
test: tests
tests: rehash
@(cd test && echo "testing..." && \
$(CLEARENV) && $(MAKE) -e $(BUILDENV) TOP=.. TESTS='${TESTS}' OPENSSL_DEBUG_MEMORY=on tests );
util/opensslwrap.sh version -a
report:
@$(PERL) util/selftest.pl
depend:
@set -e; target=depend; $(RECURSIVE_BUILD_CMD)
lint:
@set -e; target=lint; $(RECURSIVE_BUILD_CMD)
tags:
rm -f TAGS
find . -name '[^.]*.[ch]' | xargs etags -a
errors:
$(PERL) util/mkerr.pl -recurse -write
(cd engines; $(MAKE) PERL=$(PERL) errors)
$(PERL) util/ck_errf.pl */*.c */*/*.c
stacks:
$(PERL) util/mkstack.pl -write
util/libeay.num::
$(PERL) util/mkdef.pl crypto update
util/ssleay.num::
$(PERL) util/mkdef.pl ssl update
crypto/objects/obj_dat.h: crypto/objects/obj_dat.pl crypto/objects/obj_mac.h
$(PERL) crypto/objects/obj_dat.pl crypto/objects/obj_mac.h crypto/objects/obj_dat.h
crypto/objects/obj_mac.h: crypto/objects/objects.pl crypto/objects/objects.txt crypto/objects/obj_mac.num
$(PERL) crypto/objects/objects.pl crypto/objects/objects.txt crypto/objects/obj_mac.num crypto/objects/obj_mac.h
apps/openssl-vms.cnf: apps/openssl.cnf
$(PERL) VMS/VMSify-conf.pl < apps/openssl.cnf > apps/openssl-vms.cnf
crypto/bn/bn_prime.h: crypto/bn/bn_prime.pl
$(PERL) crypto/bn/bn_prime.pl >crypto/bn/bn_prime.h
TABLE: Configure
(echo 'Output of `Configure TABLE'"':"; \
$(PERL) Configure TABLE) > TABLE
update: errors stacks util/libeay.num util/ssleay.num crypto/objects/obj_dat.h apps/openssl-vms.cnf crypto/bn/bn_prime.h TABLE depend
# Build distribution tar-file. As the list of files returned by "find" is
# pretty long, on several platforms a "too many arguments" error or similar
# would occur. Therefore the list of files is temporarily stored into a file
# and read directly, requiring GNU-Tar. Call "make TAR=gtar dist" if the normal
# tar does not support the --files-from option.
tar:
find . -type d -print | xargs chmod 755
find . -type f -print | xargs chmod a+r
find . -type f -perm -0100 -print | xargs chmod a+x
find * \! -path CVS/\* \! -path \*/CVS/\* \! -name CVS \! -name .cvsignore \! -name STATUS \! -name TABLE | sort > ../$(TARFILE).list; \
$(TAR) $(TARFLAGS) --files-from ../$(TARFILE).list -cvf - | \
tardy --user_number=0 --user_name=openssl \
--group_number=0 --group_name=openssl \
--prefix=openssl-$(VERSION) - |\
gzip --best >../$(TARFILE).gz; \
rm -f ../$(TARFILE).list; \
ls -l ../$(TARFILE).gz
tar-snap:
@$(TAR) $(TARFLAGS) -cvf - \
`find * \! -path CVS/\* \! -path \*/CVS/\* \! -name CVS \! -name .cvsignore \! -name STATUS \! -name TABLE \! -name '*.o' \! -name '*.a' \! -name '*.so' \! -name '*.so.*' \! -name 'openssl' \! -name '*test' \! -name '.#*' \! -name '*~' | sort` |\
tardy --user_number=0 --user_name=openssl \
--group_number=0 --group_name=openssl \
--prefix=openssl-$(VERSION) - > ../$(TARFILE);\
ls -l ../$(TARFILE)
dist:
$(PERL) Configure dist
@$(MAKE) dist_pem_h
@$(MAKE) SDIRS='${SDIRS}' clean
@$(MAKE) TAR='${TAR}' TARFLAGS='${TARFLAGS}' tar
dist_pem_h:
(cd crypto/pem; $(MAKE) -e $(BUILDENV) pem.h; $(MAKE) clean)
install: all install_docs install_sw
install_sw:
@$(PERL) $(TOP)/util/mkdir-p.pl $(INSTALL_PREFIX)$(INSTALLTOP)/bin \
$(INSTALL_PREFIX)$(INSTALLTOP)/lib \
$(INSTALL_PREFIX)$(INSTALLTOP)/lib/engines \
$(INSTALL_PREFIX)$(INSTALLTOP)/lib/pkgconfig \
$(INSTALL_PREFIX)$(INSTALLTOP)/include/openssl \
$(INSTALL_PREFIX)$(OPENSSLDIR)/misc \
$(INSTALL_PREFIX)$(OPENSSLDIR)/certs \
$(INSTALL_PREFIX)$(OPENSSLDIR)/private
@set -e; headerlist="$(EXHEADER)"; for i in $$headerlist;\
do \
(cp $$i $(INSTALL_PREFIX)$(INSTALLTOP)/include/openssl/$$i; \
chmod 644 $(INSTALL_PREFIX)$(INSTALLTOP)/include/openssl/$$i ); \
done;
@set -e; target=install; $(RECURSIVE_BUILD_CMD)
@set -e; for i in $(LIBS) ;\
do \
if [ -f "$$i" ]; then \
( echo installing $$i; \
cp $$i $(INSTALL_PREFIX)$(INSTALLTOP)/lib/$$i.new; \
$(RANLIB) $(INSTALL_PREFIX)$(INSTALLTOP)/lib/$$i.new; \
chmod 644 $(INSTALL_PREFIX)$(INSTALLTOP)/lib/$$i.new; \
mv -f $(INSTALL_PREFIX)$(INSTALLTOP)/lib/$$i.new $(INSTALL_PREFIX)$(INSTALLTOP)/lib/$$i ); \
fi; \
done;
@set -e; if [ -n "$(SHARED_LIBS)" ]; then \
tmp="$(SHARED_LIBS)"; \
for i in $${tmp:-x}; \
do \
if [ -f "$$i" -o -f "$$i.a" ]; then \
( echo installing $$i; \
if [ "$(PLATFORM)" != "Cygwin" ]; then \
cp $$i $(INSTALL_PREFIX)$(INSTALLTOP)/lib/$$i.new; \
chmod 555 $(INSTALL_PREFIX)$(INSTALLTOP)/lib/$$i.new; \
mv -f $(INSTALL_PREFIX)$(INSTALLTOP)/lib/$$i.new $(INSTALL_PREFIX)$(INSTALLTOP)/lib/$$i; \
else \
c=`echo $$i | sed 's/^lib\(.*\)\.dll\.a/cyg\1-$(SHLIB_VERSION_NUMBER).dll/'`; \
cp $$c $(INSTALL_PREFIX)$(INSTALLTOP)/bin/$$c.new; \
chmod 755 $(INSTALL_PREFIX)$(INSTALLTOP)/bin/$$c.new; \
mv -f $(INSTALL_PREFIX)$(INSTALLTOP)/bin/$$c.new $(INSTALL_PREFIX)$(INSTALLTOP)/bin/$$c; \
cp $$i $(INSTALL_PREFIX)$(INSTALLTOP)/lib/$$i.new; \
chmod 644 $(INSTALL_PREFIX)$(INSTALLTOP)/lib/$$i.new; \
mv -f $(INSTALL_PREFIX)$(INSTALLTOP)/lib/$$i.new $(INSTALL_PREFIX)$(INSTALLTOP)/lib/$$i; \
fi ); \
fi; \
done; \
( here="`pwd`"; \
cd $(INSTALL_PREFIX)$(INSTALLTOP)/lib; \
$(MAKE) -f $$here/Makefile HERE="$$here" link-shared ); \
if [ "$(INSTALLTOP)" != "/usr" ]; then \
echo 'OpenSSL shared libraries have been installed in:'; \
echo ' $(INSTALLTOP)'; \
echo ''; \
sed -e '1,/^$$/d' doc/openssl-shared.txt; \
fi; \
fi
cp libcrypto.pc $(INSTALL_PREFIX)$(INSTALLTOP)/lib/pkgconfig
chmod 644 $(INSTALL_PREFIX)$(INSTALLTOP)/lib/pkgconfig/libcrypto.pc
cp libssl.pc $(INSTALL_PREFIX)$(INSTALLTOP)/lib/pkgconfig
chmod 644 $(INSTALL_PREFIX)$(INSTALLTOP)/lib/pkgconfig/libssl.pc
cp openssl.pc $(INSTALL_PREFIX)$(INSTALLTOP)/lib/pkgconfig
chmod 644 $(INSTALL_PREFIX)$(INSTALLTOP)/lib/pkgconfig/openssl.pc
install_docs:
@$(PERL) $(TOP)/util/mkdir-p.pl \
$(INSTALL_PREFIX)$(MANDIR)/man1 \
$(INSTALL_PREFIX)$(MANDIR)/man3 \
$(INSTALL_PREFIX)$(MANDIR)/man5 \
$(INSTALL_PREFIX)$(MANDIR)/man7
@pod2man="`cd util; ./pod2mantest $(PERL)`"; \
here="`pwd`"; \
filecase=; \
if [ "$(PLATFORM)" = "DJGPP" -o "$(PLATFORM)" = "Cygwin" -o "$(PLATFORM)" = "mingw" ]; then \
filecase=-i; \
fi; \
set -e; for i in doc/apps/*.pod; do \
fn=`basename $$i .pod`; \
sec=`$(PERL) util/extract-section.pl 1 < $$i`; \
echo "installing man$$sec/$$fn.$${sec}$(MANSUFFIX)"; \
(cd `$(PERL) util/dirname.pl $$i`; \
sh -c "$$pod2man \
--section=$$sec --center=OpenSSL \
--release=$(VERSION) `basename $$i`") \
> $(INSTALL_PREFIX)$(MANDIR)/man$$sec/$$fn.$${sec}$(MANSUFFIX); \
$(PERL) util/extract-names.pl < $$i | \
(grep -v $$filecase "^$$fn\$$"; true) | \
(grep -v "[ ]"; true) | \
(cd $(INSTALL_PREFIX)$(MANDIR)/man$$sec/; \
while read n; do \
$$here/util/point.sh $$fn.$${sec}$(MANSUFFIX) "$$n".$${sec}$(MANSUFFIX); \
done); \
done; \
set -e; for i in doc/crypto/*.pod doc/ssl/*.pod; do \
fn=`basename $$i .pod`; \
sec=`$(PERL) util/extract-section.pl 3 < $$i`; \
echo "installing man$$sec/$$fn.$${sec}$(MANSUFFIX)"; \
(cd `$(PERL) util/dirname.pl $$i`; \
sh -c "$$pod2man \
--section=$$sec --center=OpenSSL \
--release=$(VERSION) `basename $$i`") \
> $(INSTALL_PREFIX)$(MANDIR)/man$$sec/$$fn.$${sec}$(MANSUFFIX); \
$(PERL) util/extract-names.pl < $$i | \
(grep -v $$filecase "^$$fn\$$"; true) | \
(grep -v "[ ]"; true) | \
(cd $(INSTALL_PREFIX)$(MANDIR)/man$$sec/; \
while read n; do \
$$here/util/point.sh $$fn.$${sec}$(MANSUFFIX) "$$n".$${sec}$(MANSUFFIX); \
done); \
done
# DO NOT DELETE THIS LINE -- make depend depends on it.
![swh spinner](/static/img/swh-spinner.gif)
Computing file changes ...