# PyRate configuration file for GAMMA-format interferograms
#
#%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
# Optional Correction ON/OFF switches - ON = 1; OFF = 0

# Coherence masking (PREPIFG)
cohmask:       0

# Orbital error correction (CORRECT)
orbfit:        1

# DEM error (residual topography) correction (CORRECT)
demerror:      1

# Phase Closure correction (CORRECT)
phase_closure: 1

# APS correction using spatio-temporal filter (CORRECT)
apsest:        0

#%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
# Integer parameters

# LOS Projection of output products (MERGE)
# Converts slanted (native) LOS signals to either "pseudo-vertical" or "pseudo-horizontal", 
# by dividing by the cosine or sine of the incidence angle for each pixel, respectively.
# los_projection: 0 = LOS (no conversion); 1 = pseudo-vertical; 2 = pseudo-horizontal.
los_projection:  0

# Sign convention for phase data (MERGE)
# signal_polarity:  1 = retain sign convention of input interferograms
# signal_polarity: -1 = reverse sign convention of input interferograms (default)
signal_polarity: -1

# Number of sigma to report velocity error. Positive integer. Default: 2 (TIMESERIES/STACK)
velerror_nsig:   2

# Optional save of numpy array files for output products (MERGE)
savenpy:         0

# Optional save of incremental time series products (TIMESERIES/MERGE)
savetsincr:      0

#%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
# Multi-threading parameters (CORRECT/TIMESERIES/STACK)
# parallel: 1 = parallel, 0 = serial
parallel:      0
# number of processes
processes:     8

#%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
# Input/Output file locations
#
# File containing the list of interferograms to use.
ifgfilelist:   tests/test_data/cropA/ifg_30

# The DEM file used in the InSAR processing
demfile:       tests/test_data/cropA/geotiffs/cropA_T005A_dem.tif

# The DEM header file from GAMMA (*.par) or ROI_PAC (*.rsc).
demHeaderFile: tests/test_data/cropA/headers/cropA_20180106_VV_8rlks_eqa_dem.par

# File listing the pool of available header files (GAMMA: *mli.par, ROI_PAC: *.rsc)
hdrfilelist:   tests/test_data/cropA/headers_13

# File listing the pool of available coherence files.
cohfilelist:   tests/test_data/cropA/coherence_30

# File listing the pool of available baseline files (GAMMA).
basefilelist:  tests/test_data/cropA/baseline_30

# Look-up table containing radar-coded row and column for lat/lon pixels (GAMMA)
ltfile:        tests/test_data/cropA/geometry/20180106_VV_8rlks_eqa_to_rdc.lt

# Directory to write the outputs to
outdir:        out/

#%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
# PREPIFG parameters
#------------------------------------
# Input data format: ROI_PAC = 0, GAMMA = 1
processor:     1

# Coherence threshold value for masking, between 0 and 1
cohthresh:     0.3

# Multi-look/subsampling factor in east (x) and north (y) dimension
ifglksx:       1
ifglksy:       1

# Cropping options
# ifgcropopt: 1 = minimum extent 2 = maximum extent 3 = crop 4 = no cropping
# ifgxfirst,ifgyfirst: longitude (x) and latitude (y) of north-west corner
# ifgxlast,ifgylast: longitude (x) and latitude (y) of south-east corner
ifgcropopt:    4
ifgxfirst:     150.92
ifgyfirst:     -34.18
ifgxlast:      150.94
ifgylast:      -34.22

# No-data averaging threshold (0 = 0%; 1 = 100%)
noDataAveragingThreshold: 0.5

# The No-data value used in the interferogram files
noDataValue:   0.0

# Nan conversion flag. Set to 1 if missing No-data values are to be converted to NaN
nan_conversion: 1

#%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
# CORRECT parameters
#------------------------------------
# Reference pixel search parameters

# refx/y: Lon/Lat coordinate of reference pixel. If left blank then search for best pixel will be performed
# refnx/y: number of search grid points in x/y image dimensions
# refchipsize: size of the data window at each search grid point
# refminfrac: minimum fraction of valid (non-NaN) pixels in the data window
refx:          -99.083
refy:          19.441
refnx:         5
refny:         5
refchipsize:   7
refminfrac:    0.01

#------------------------------------
# Reference phase correction method

# refest: 1 = median of the whole interferogram
# refest: 2 = median within the window surrounding the chosen reference pixel
refest:        2

#------------------------------------
# Orbital error correction parameters

# orbfitmethod = 1: interferograms corrected independently; 2: network method
# orbfitdegrees: Degree of polynomial surface to fit (1 = planar; 2 = quadratic; 3 = part-cubic)
# orbfitlksx/y: additional multi-look factor for network orbital correction
orbfitmethod:  1
orbfitdegrees: 1
orbfitlksx:    5
orbfitlksy:    5

#------------------------------------
# Phase closure correction parameters

# large_dev_thr: closure threshold for each pixel in multiples of pi, e.g. 0.5 = pi/2, 1 = pi.
# avg_ifg_err_thr: ifgs with more than this fraction of pixels above the closure threshold will be dropped.
# loops_thr_ifg: ifgs are dropped if they do not participate in at least this many loops
# max_loop_length: loops up to this many edges are considered for closure checks
# subtract_median: subtract median during closure checks (1 = yes; 0 = no)
# max_loops_per_ifg: A loop will be discarded if all ifgs in that loop have contributed already to a number of loops equal to this parameter.
large_dev_thr:     0.5
avg_ifg_err_thr:   0.05
loops_thr_ifg:     2
max_loop_length:   4
subtract_median:   1
max_loops_per_ifg: 2

#------------------------------------
# APS filter parameters

# tlpfcutoff: cutoff t0 for temporal high-pass Gaussian filter in days (int);
# tlpfpthr: valid pixel threshold;
# slpfcutoff: spatial low-pass Gaussian filter cutoff in km (greater than zero).
# slpfcutoff=0 triggers cutoff estimation from exponential covariance function
tlpfcutoff:    30
tlpfpthr:      1
slpfcutoff:    1

#------------------------------------
# DEM error (residual topography) correction parameters

# de_pthr: valid observations threshold;
de_pthr:       20

#%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
# TIMESERIES parameters
#------------------------------------

# tsmethod: Method for time series inversion (1 = Laplacian Smoothing; 2 = SVD)
# smorder: order of Laplacian smoothing operator (1 = first-order difference; 2 = second-order difference)
# smfactor: smoothing factor for Laplacian smoothing (value provided is converted as 10**smfactor)
# ts_pthr: valid observations threshold for time series inversion
tsmethod:      2
smorder:       2
smfactor:      -0.25
ts_pthr:       10

#%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
# STACK parameters
#------------------------------------

# pthr: threshold for minimum number of ifg observations for each pixel
# nsig: threshold for iterative removal of observations
# maxsig: maximum sigma (std dev; millimetres) used as an output masking threshold applied in Merge step. 0 = OFF.
pthr:          5
nsig:          3
maxsig:        1000