| 6410dd5 | Martin Schwidefsky | 14 January 2006, 21:20:58 UTC | [PATCH] s390: sigcontext.h vs __user Add an include of linux/compiler.h in sigcontext.h to avoid compiler errors in user space apps because of a missing definition for __user. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org> | 15 January 2006, 02:27:08 UTC |
| eb33c19 | Heiko Carstens | 14 January 2006, 21:20:57 UTC | [PATCH] s390: show_task oops The show_task function walks the kernel stack backchain of processes assuming that the processes are not running. Since this assumption is not correct walking the backchain can lead to an addressing exception and therefore to a kernel hang. So prevent the kernel hang (you still get incorrect results) verity that all read accesses are within the bounds of the kernel stack before performing them. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org> | 15 January 2006, 02:27:08 UTC |
| 7ffbc9d | Jan Glauber | 14 January 2006, 21:20:56 UTC | [PATCH] s390: sha256 crypto code fix Fix processing of messages larger than 2 * SHA256_BLOCK_SIZE. Signed-off-by: Jan Glauber <jan.glauber@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org> | 15 January 2006, 02:27:08 UTC |
| fda5e14 | Jan Glauber | 14 January 2006, 21:20:55 UTC | [PATCH] s390: aes crypto code fixes Call KM[C] only with a multiple of block size. Check return value of KM[C] instructions and complain about erros Signed-off-by: Jan Glauber <jan.glauber@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org> | 15 January 2006, 02:27:08 UTC |
| b8dc603 | Jan Glauber | 14 January 2006, 21:20:53 UTC | [PATCH] s390: des crypto code speedup Provide ECB and CBC encrypt / decrypt functions to crypto API to speed up our hardware accelerated DES implementation. This new functions allow the crypto API to call ECB / CBC directly with large blocks in difference to the old functions that were calles with algorithm block size (8 bytes for DES). This is up to factor 10 faster than our old hardware implementation :) Signed-off-by: Jan Glauber <jan.glauber@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org> | 15 January 2006, 02:27:08 UTC |
| c135783 | Jan Glauber | 14 January 2006, 21:20:53 UTC | [PATCH] s390: des crypto code cleanup Beautify the s390 in-kernel-crypto des code. Signed-off-by: Jan Glauber <jan.glauber@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org> | 15 January 2006, 02:27:08 UTC |
| 7aa8974 | Chuck Ebbert | 14 January 2006, 21:20:52 UTC | [PATCH] i386: fix stack dump loglevel Recent changes caused part of stack traces from SysRq-T to print at KERN_EMERG loglevel. Also, parts of stack dump during oops were failing to print at that level when they should. Signed-off-by: Chuck Ebbert <76306.1226@compuserve.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org> | 15 January 2006, 02:27:07 UTC |
| ce63ad7 | Randy Dunlap | 14 January 2006, 21:20:51 UTC | [PATCH] i386: put HOTPLUG_CPU under Processor type, not Bus options Move the HOTPLUG_CPU option under "Processor type" instead of under "Bus options". This makes it the same for i386 as most other processor types (arm, ia64, parisc, ppc, s390, & x86_64; but not for powerpc). Besides, it takes me too long to find it under Bus options. I can't be the only person who has trouble finding it. Signed-off-by: Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org> | 15 January 2006, 02:27:07 UTC |
| fabbfb9 | Kumar Gala | 14 January 2006, 21:20:50 UTC | [PATCH] powerpc: Add support for the MPC83xx watchdog Add support for the PowerPC MPC83xx watchdog. The MPC83xx has a simple watchdog that once enabled it can not be stopped, has some simple timeout range selection, and the ability to either reset the processor or take a machine check. Signed-off-by: Dave Updegraff <dave@cray.org> Signed-off-by: Kumar Gala <galak@kernel.crashing.org> Cc: Wim Van Sebroeck <wim@iguana.be> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org> | 15 January 2006, 02:27:07 UTC |
| 7339ff8 | Robin Holt | 14 January 2006, 21:20:48 UTC | [PATCH] Add tmpfs options for memory placement policies Anything that writes into a tmpfs filesystem is liable to disproportionately decrease the available memory on a particular node. Since there's no telling what sort of application (e.g. dd/cp/cat) might be dropping large files there, this lets the admin choose the appropriate default behavior for their site's situation. Introduce a tmpfs mount option which allows specifying a memory policy and a second option to specify the nodelist for that policy. With the default policy, tmpfs will behave as it does today. This patch adds support for preferred, bind, and interleave policies. The default policy will cause pages to be added to tmpfs files on the node which is doing the writing. Some jobs expect a single process to create and manage the tmpfs files. This results in a node which has a significantly reduced number of free pages. With this patch, the administrator can specify the policy and nodes for that policy where they would prefer allocations. This patch was originally written by Brent Casavant and Hugh Dickins. I added support for the bind and preferred policies and the mpol_nodelist mount option. Signed-off-by: Brent Casavant <bcasavan@sgi.com> Signed-off-by: Hugh Dickins <hugh@veritas.com> Signed-off-by: Robin Holt <holt@sgi.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org> | 15 January 2006, 02:27:07 UTC |
| 852cf91 | Christoph Lameter | 14 January 2006, 21:20:46 UTC | [PATCH] Fix for CONFIG_NUMA without CONFIG_SWAP Some people apparently run CONFIG_NUMA without CONFIG_SWAP. The migration code currently depends on swap. This patch provides a set of inline fallback functions so that the kernel properly compiles. However, calls to migration functions will fail. Signed-off-by: Christoph Lameter <clameter@sgi.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org> | 15 January 2006, 02:27:07 UTC |
| eed6565 | Calin A. Culianu | 14 January 2006, 21:20:46 UTC | [PATCH] Watchdog: Winsystems EPX-C3 SBC This is a 2.6 patch that adds support for the watchdog timer built into the EPX-C3 single board computer manufactured by Winsystems, Inc. Driver details: This is for x86 only. This watchdog is pretty basic and simple. It is only configurable via jumpers on the SBC, and it only has either a 1.5s or 200s interval. The watchdog can either be auto-configured to start as soon as the machine powers up (bad idea for the 1.5s interval!) or it can be enabled and disabled by writing to io port 0x1ee. Petting the watchdog involves writing any value to io port 0x1ef. The only unfortunate thing about this watchdog (and it is not at all uncommmon in watchdogs that linux supports) is that it is not a PCI or ISA-PNP device and as such it isn't at all probeable. Either the watchdog exists as 2 bytes at 0x1ee, or it doesn't. Thus, using this driver on a machine that doesn't have that watchdog can potentially hang/crash the system, etc. So only use this driver if you in fact are on a Winsystems EPX-C3 SBC. Anyway this driver fits into the already-existing watchdog framework quite nicely and I already tested it on my EPX-C3 and it works like a charm. Signed-off-by: Calin A. Culianu <calin@ajvar.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org> | 15 January 2006, 02:27:07 UTC |
| ee7be5d | Miklos Szeredi | 14 January 2006, 21:20:44 UTC | [PATCH] uml: fix symbol for mktime LD .tmp_vmlinux1 /usr/lib/gcc-lib/i486-linux/3.3.4/../../../libc.a(mktime.o): In function `timelocal': : multiple definition of `mktime' kernel/built-in.o:kernel/time.c:604: first defined here /usr/bin/ld: Warning: size of symbol `mktime' changed from 134 in kernel/built-in.o to 44 in /usr/lib/gcc-lib/i486-linux/3.3.4/../../../libc.a(mktime.o) collect2: ld returned 1 exit status Signed-off-by: Miklos Szeredi <miklos@szeredi.hu> Cc: Jeff Dike <jdike@addtoit.com> Cc: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org> | 15 January 2006, 02:27:06 UTC |
| 858119e | Arjan van de Ven | 14 January 2006, 21:20:43 UTC | [PATCH] Unlinline a bunch of other functions Remove the "inline" keyword from a bunch of big functions in the kernel with the goal of shrinking it by 30kb to 40kb Signed-off-by: Arjan van de Ven <arjan@infradead.org> Signed-off-by: Ingo Molnar <mingo@elte.hu> Acked-by: Jeff Garzik <jgarzik@pobox.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org> | 15 January 2006, 02:27:06 UTC |
| b0a9499 | Ingo Molnar | 14 January 2006, 21:20:41 UTC | [PATCH] sched: add new SCHED_BATCH policy Add a new SCHED_BATCH (3) scheduling policy: such tasks are presumed CPU-intensive, and will acquire a constant +5 priority level penalty. Such policy is nice for workloads that are non-interactive, but which do not want to give up their nice levels. The policy is also useful for workloads that want a deterministic scheduling policy without interactivity causing extra preemptions (between that workload's tasks). Signed-off-by: Ingo Molnar <mingo@elte.hu> Cc: Michael Kerrisk <mtk-manpages@gmx.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org> | 15 January 2006, 02:25:20 UTC |
| 2d0cfb5 | Patrick Gefre | 14 January 2006, 21:20:40 UTC | [PATCH] Altix: ioc3 serial support Add driver support for a 2 port PCI IOC3-based serial card on Altix boxes: This is a re-submission. On the original submission I was asked to organize the code so that the MIPS ioc3 ethernet and serial parts could be used with this driver. Stanislaw Skowronek was kind enough to provide the shim layer for this - thanks Stanislaw. This patch includes the shim layer and the Altix PCI ioc3 serial driver. The MIPS merged ioc3 ethernet and serial support is forthcoming. Signed-off-by: Patrick Gefre <pfg@sgi.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org> | 15 January 2006, 02:25:20 UTC |
| 7170be5 | Neil Horman | 14 January 2006, 21:20:38 UTC | [PATCH] convert /proc/devices to use seq_file interface A Christoph suggested that the /proc/devices file be converted to use the seq_file interface. This patch does that. I've obxerved one or two installation that had sufficiently large sans that they overran the 4k limit on /proc/devices. Signed-off-by: Neil Horman <nhorman@redhat.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org> | 15 January 2006, 02:25:19 UTC |
| faf3a98 | Ian Kent | 14 January 2006, 21:20:37 UTC | [PATCH] autofs4 oops fix We forgot to initialise a couple of nameidata fields. Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org> | 15 January 2006, 02:25:19 UTC |
| 7c7dce9 | Alexander Viro | 14 January 2006, 20:29:55 UTC | [PATCH] Fix double decrement of mqueue_mnt->mnt_count in sys_mq_open Fixed the refcounting on failure exits in sys_mq_open() and cleaned the logics up. Rules are actually pretty simple - dentry_open() expects vfsmount and dentry to be pinned down and it either transfers them into created struct file or drops them. Old code had been very confused in that area - if dentry_open() had failed either in do_open() or do_create(), we ended up dentry and mqueue_mnt dropped twice, once by dentry_open() cleanup and then by sys_mq_open(). Fix consists of making the rules for do_create() and do_open() same as for dentry_open() and updating the sys_mq_open() accordingly; that actually leads to more straightforward code and less work on normal path. Signed-off-by: Al Viro <aviro@redhat.com> Signed-off-by: Linus Torvalds <torvalds@osdl.org> | 14 January 2006, 20:38:17 UTC |
| 12dbf3f | Linus Torvalds | 14 January 2006, 20:16:07 UTC | Merge master.kernel.org:/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6 | 14 January 2006, 20:16:07 UTC |
| 61b7efd | Linus Torvalds | 14 January 2006, 18:43:26 UTC | Merge master.kernel.org:/pub/scm/linux/kernel/git/gregkh/spi-2.6 | 14 January 2006, 18:43:26 UTC |
| 3e2b32b | Linus Torvalds | 14 January 2006, 18:42:40 UTC | Merge master.kernel.org:/pub/scm/linux/kernel/git/gregkh/driver-2.6 | 14 January 2006, 18:42:40 UTC |
| 3824ba7 | Adrian Bunk | 14 January 2006, 02:08:16 UTC | [PATCH] remove unused tmp_buf_sem's tmp_buf_sem sems to be a common name for something completely unused... Signed-off-by: Adrian Bunk <bunk@stusta.de> Acked-by: Greg Kroah-Hartman <gregkh@suse.de> ("usb portion") Signed-off-by: Linus Torvalds <torvalds@osdl.org> | 14 January 2006, 18:41:42 UTC |
| e1b114e | Xose Vazquez Perez | 14 January 2006, 11:57:41 UTC | [PATCH] docs: update some updated code docs Based on comments from Randy Dunlap on my previous commit 5b0ed2c64d8fdafb5fcfb3baabdd288628b1ff9b Signed-off-by: Linus Torvalds <torvalds@osdl.org> | 14 January 2006, 18:39:53 UTC |
| 7b4ee73 | Evgeniy | 14 January 2006, 08:42:06 UTC | [PATCH] ufs cleanup Here is update of ufs cleanup patch, brought on by the recently fixed ubh_get_usb_second() bug that made some ugly code rather painfully obvious. It also includes - fix compilation warnings which appears if debug mode turn on - remove unnecessary duplication of code to support UFS2 I tested it on ufs1 and ufs2 file-systems. Signed-off-by: Evgeniy Dushistov <dushistov@mail.ru> Signed-off-by: Linus Torvalds <torvalds@osdl.org> | 14 January 2006, 18:27:32 UTC |
| 59af703 | Linus Torvalds | 14 January 2006, 17:55:28 UTC | Merge branch 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6 | 14 January 2006, 17:55:28 UTC |
| e7de369 | Linus Torvalds | 14 January 2006, 17:49:16 UTC | Merge master.kernel.org:/pub/scm/linux/kernel/git/dtor/input | 14 January 2006, 17:49:16 UTC |
| fc091e0 | andrew.vasquez@qlogic.com | 14 January 2006, 01:06:04 UTC | [SCSI] qla2xxx: Update version number to 8.01.04-k. Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com> | 14 January 2006, 16:55:40 UTC |
| 79f89a4 | andrew.vasquez@qlogic.com | 14 January 2006, 01:05:58 UTC | [SCSI] qla2xxx: Disable port-type RSCN handling via driver state-machine. Given the semantic changes in both the device-model and fc-transport APIs, the driver's handling of port-type RSCNs via a series of ADISCs and PLOGIs can cause series of badness ranging from unexpectedly device loss to devices not being discovered. In the interim, disable (via a module-parameter) this feature and allow RSCN management to continue to occur within the driver's DPC thread. Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com> | 14 January 2006, 16:55:39 UTC |
| fdd52df | andrew.vasquez@qlogic.com | 14 January 2006, 01:05:53 UTC | [SCSI] qla2xxx: Kconfig update: Add URL to download firmware images. Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com> | 14 January 2006, 16:55:37 UTC |
| c0eb875 | andrew.vasquez@qlogic.com | 14 January 2006, 01:05:48 UTC | [SCSI] qla2xxx: Correct setting of FDMI supported/current port speed. Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com> | 14 January 2006, 16:55:36 UTC |
| bc8fb3c | andrew.vasquez@qlogic.com | 14 January 2006, 01:05:42 UTC | [SCSI] qla2xxx: Correct execution-throttle setting for ISP24xx. Similarly to other ISPs, set execution throttle to maximum allowed value since 'throttling' is done on a per-lun basis via queue-depth. Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com> | 14 January 2006, 16:55:35 UTC |
| 590f98e | andrew.vasquez@qlogic.com | 14 January 2006, 01:05:37 UTC | [SCSI] qla2xxx: Collapse load RISC RAM implementations. Simplify essentially duplicate load RISC RAM implementation in qla2x00_load_ram_ext() and qla2x00_load_ram(). Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com> | 14 January 2006, 16:55:34 UTC |
| f94097e | andrew.vasquez@qlogic.com | 14 January 2006, 01:05:32 UTC | [SCSI] qla2xxx: Correct swing/emphasis settings for ISP24XX. Swing/emphasis settings in NVRAM were not being honoured due to the driver not converting the serial-link options from LE to host-endian format. Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com> | 14 January 2006, 16:55:33 UTC |
| c9d02ac | andrew.vasquez@qlogic.com | 14 January 2006, 01:05:26 UTC | [SCSI] qla2xxx: Correct issue where portstate does not transition during loop-resync. If the Get Port Database call fails during local-loop update, then schedule the DPC routine to perform a rescan as the firmware would have updated the Get ID List port-entries of their new state. Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com> | 14 January 2006, 16:55:31 UTC |
| 210d535 | andrew.vasquez@qlogic.com | 14 January 2006, 01:05:21 UTC | [SCSI] qla2xxx: Update firmware-dump procedure for ISP24xx. Small changes to register retrieval and order as per latest firmware specification. Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com> | 14 January 2006, 16:55:30 UTC |
| e978010 | andrew.vasquez@qlogic.com | 14 January 2006, 01:05:15 UTC | [SCSI] qla2xxx: Re-enable flash-part write protection on ISP24xx boards. Driver would not correctly re-enable the write-protection bits of the flash part after updates. Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com> | 14 January 2006, 16:55:29 UTC |
| 5998983 | andrew.vasquez@qlogic.com | 14 January 2006, 01:05:10 UTC | [SCSI] qla2xxx: Correct excessive delay during LOAD-RISC-RAM mailbox command. Problem report (against 2.4.x driver) from Jeff Layton <jlayton@redhat.com>: An OEM noticed that the U6 qla2200 driver would hang for around 2 minutes at boot time and then proceed normally. I found that the delay was occurring when loading the new firmware into the card, and was due to a schedule_timeout(10) added to the bottom of the polling loop. Some testing showed that the load ram operation on the card was very quick (on the order of a couple of jiffies), but the sleep in the polling loop was making each operation take around 25-30. The attached patch corrects this by making it skip sleeping during the load ram operation, since I believe we only do that when the module is plugged in. It also skips sleeping if the mbox_int flag got set during the current loop. This corrected the hang on my test setup, and OEM also confirmed that it corrected the problem for them. Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com> | 14 January 2006, 16:55:28 UTC |
| 03ab2ea | andrew.vasquez@qlogic.com | 14 January 2006, 01:05:05 UTC | [SCSI] qla2xxx: Use msleep() as delay during ISP polling. Mailbox commands are polled for completion during ISP initialization. During potentially 'long' mailbox commands (i.e. fabric login), we really don't want a busy-wait delay to potentially trigger a (benign) soft-lockup BUG(). Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com> | 14 January 2006, 16:55:27 UTC |
| e038a1b | andrew.vasquez@qlogic.com | 14 January 2006, 01:04:59 UTC | [SCSI] qla2xxx: Drop noisy 'UNDERRUN' status message. There's no point in displaying the message during a valid underrun case. Limit the message to potentially problematic cases. Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com> | 14 January 2006, 16:55:26 UTC |
| 9403688 | andrew.vasquez@qlogic.com | 14 January 2006, 01:04:54 UTC | [SCSI] qla2xxx: Correct FC4 feature assignment during RFF_ID. Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com> | 14 January 2006, 16:55:24 UTC |
| dad9c8c | andrew.vasquez@qlogic.com | 14 January 2006, 01:04:49 UTC | [SCSI] qla2xxx: Reference proper node/port names in fc_host class. The initial-control-block references are not always correct as the use-node-name qualifier during NVRAM configuration will cause the firmware to use the portname as a base for the nodename. Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com> | 14 January 2006, 16:55:23 UTC |
| a1e80c2 | Mike Christie | 14 January 2006, 00:05:56 UTC | [SCSI] iscsi: use pageslab From: FUJITA Tomonori <tomof@acm.org> and zhenyu.z.wang@intel.com: We cannot handle filesystems like XFS becuase of the pages they are sending us. We had thought page_count could be used to work around this, but the correct test is for PageSlab. The proper solution is to figure out what type of pages filesystems can use so we do not have to add tests like this or handle it in the block layer for all network block drivers but the issue still has not been resolved on fs-devel so we are sending this patch as a temporary fix. This is last patch just in case it is Nakd with the explanation that we need to push the correct fix through fs-devel, mm or the block layer. The rest of the patchset can live without the patch, but the driver will not work with filesystems like XFS. Signed-off-by: Alex Aizman <itn780@yahoo.com> Signed-off-by: Dmitry Yusupov <dmitry_yus@yahoo.com> Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com> | 14 January 2006, 16:55:22 UTC |
| 55e3299 | Mike Christie | 14 January 2006, 00:05:53 UTC | [SCSI] iscsi: fix 4k stack iscsi setups When we run the xmit code from queuecomand the stack trace gets too deep. The patch runs the xmit code from the scsi_host work queue. This fixes 4k stack and xfs support and should fix the st and sg stack usage bugs. Signed-off-by: Alex Aizman <itn780@yahoo.com> Signed-off-by: Dmitry Yusupov <dmitry_yus@yahoo.com> Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com> | 14 January 2006, 16:55:21 UTC |
| 7b8631b | Mike Christie | 14 January 2006, 00:05:50 UTC | [SCSI] iscsi: seperate iscsi interface from setup functions This is the second version of the patch to address Christoph's comments. Instead of doing the lib, I just kept everything in scsi_trnapsort_iscsi.c like the FC and SPI class. This was becuase the driver model and sysfs class is tied to the session and connection setup so separating did not buy very much at this time. The reason for this patch was becuase HW iscsi LLDs like qla4xxx cannot use the iscsi class becuase the scsi_host was tied to the interface and class code. This patch just seperates the session from scsi host so that LLDs that allocate the host per some resource like pci device can still use the class. This is also fixes a couple refcount bugs that can be triggered when users have a sysfs file open, close the session, then read or write to the file. Signed-off-by: Alex Aizman <itn780@yahoo.com> Signed-off-by: Dmitry Yusupov <dmitry_yus@yahoo.com> Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com> | 14 January 2006, 16:55:20 UTC |
| 7cae515 | Mike Christie | 14 January 2006, 00:05:47 UTC | [SCSI] iscsi: add high mem support From Mike Christie <michaelc@cs.wisc.edu> and FUJITA Tomonori <tomof@acm.org>: We cannot use page_address becuase some pages could be highmem. Instead, we can use sock_no_sendpage which does kmap for us. Signed-off-by: Alex Aizman <itn780@yahoo.com> Signed-off-by: Dmitry Yusupov <dmitry_yus@yahoo.com> Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com> | 14 January 2006, 16:55:18 UTC |
| 5685169 | FUJITA Tomonori | 14 January 2006, 00:05:44 UTC | [SCSI] iscsi: data digest page cache usage fix Users can write to a page while we are sending it and making digest calculations. This ends up causing us to retry the command when a digest error is later reported. By using sock_no_sendpage when data digests are calculated we can avoid a lot of (not all but it helps) the retries becuase sock_no_sendpage is not zero copy. Signed-off-by: Alex Aizman <itn780@yahoo.com> Signed-off-by: Dmitry Yusupov <dmitry_yus@yahoo.com> Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com> | 14 January 2006, 16:55:17 UTC |
| 3e97c7e | zhenyu.z.wang@intel.com | 14 January 2006, 00:05:41 UTC | [SCSI] iscsi: host locking fix We should be taking the host_lock instead of the conn lock when checking host_busy. Signed-off-by: Alex Aizman <itn780@yahoo.com> Signed-off-by: Dmitry Yusupov <dmitry_yus@yahoo.com> Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com> | 14 January 2006, 16:55:16 UTC |
| bf310b8 | zhenyu.z.wang@intel.com | 14 January 2006, 00:05:38 UTC | [SCSI] iscsi: data under/over flow fix We need to check the ISCSI_FLAG_DATA_* flags. Signed-off-by: Alex Aizman <itn780@yahoo.com> Signed-off-by: Dmitry Yusupov <dmitry_yus@yahoo.com> Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com> | 14 January 2006, 16:55:15 UTC |
| 42f72aa | FUJITA Tomonori | 14 January 2006, 00:05:35 UTC | [SCSI] iscsi: whitespace cleanup Remove extra whitespaces. Signed-off-by: Alex Aizman <itn780@yahoo.com> Signed-off-by: Dmitry Yusupov <dmitry_yus@yahoo.com> Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com> | 14 January 2006, 16:55:14 UTC |
| a12e25b | Jes Sorensen | 11 January 2006, 13:39:45 UTC | [SCSI] sem2mutex 3w-[x9]xxx Convert a the 3w-9xxx.c and 3w-xxxx.c drivers to use mutexes instead of semaphores. Untested, but compiles and looks obviously correct. Signed-off-by: Jes Sorensen <jes@sgi.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com> | 14 January 2006, 16:55:12 UTC |
| 3759b78 | James Bottomley | 14 January 2006, 15:28:07 UTC | [SCSI] mptfc: need to select transport attrs Now that mptfc actually uses the transport class, it can't be built without it. Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com> | 14 January 2006, 16:55:11 UTC |
| 569b11d | Moore, Eric | 13 January 2006, 23:25:29 UTC | [SCSI] fusion - fix pci express bug The fix is to write 'MPI_HIM_DIM' to the Host Interrupt Mask register, when enabling interrupts. Instead of the tilde of MPI_HIM_RIM. Apparently writing '1's to some of the reserved bits was causing all the bits to go to `1`, which effectly disabled all interrupts. Signed-off-by: Eric Moore <Eric.Moore@lsil.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com> | 14 January 2006, 16:55:10 UTC |
| e6bc863 | Moore, Eric | 13 January 2006, 23:33:59 UTC | [SCSI] scsi_transport_sas: mapping the rphy channel equal to the port identifier We will be mapping the RAID volumes in mptsas to a reserved channel that is one larger than the anticapated number of ports on the direct attached host adapter. Signed-off-by: Eric Moore <Eric.Moore@lsil.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com> | 14 January 2006, 16:55:09 UTC |
| 4b915a7 | Moore, Eric | 13 January 2006, 23:25:23 UTC | [SCSI] fusion - mpi header udpate This updates mpi headers in fusion drivers to version 1.5.12. Signed-off-by: Eric Moore <Eric.Moore@lsil.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com> | 14 January 2006, 16:55:08 UTC |
| 816aa90 | Moore, Eric | 13 January 2006, 23:25:20 UTC | [SCSI] fusion - adding raid support in mptsas The SAS RAID volumes are reported beyond the expected number of phys. Signed-off-by: Eric Moore <Eric.Moore@lsil.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com> | 14 January 2006, 16:55:06 UTC |
| e02f3f5 | Christoph Hellwig | 13 January 2006, 18:04:00 UTC | [SCSI] remove target parent limitiation When James Smart fixed the issue of the userspace scan atributes crashing the system with the FC transport class he added a patch to let the transport class check if the parent is valid for a given transport class. When adding support for the integrated raid of fusion sas devices we ran into a problem with that, as it didn't allow adding virtual raid volumes without the transport class knowing about it. So this patch adds a user_scan attribute instead, that takes over from scsi_scan_host_selected if the transport class sets it and thus lets the transport class control the user-initiated scanning. As this plugs the hole about user-initiated scanning the target_parent hook goes away and we rely on callers of the scanning routines to do something sensible. For SAS this meant I had to switch from a spinlock to a mutex to synchronize the topology linked lists, in FC they were completely unsynchronized which seems wrong. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com> | 14 January 2006, 16:55:05 UTC |
| 6d5b0c3 | Moore, Eric | 13 January 2006, 23:25:26 UTC | [SCSI] fusion - adding support for FC949ES Add software recognition for the new LSI Logic Fibre Channel controller. Signed-off-by: Eric Moore <Eric.Moore@lsil.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com> | 14 January 2006, 16:55:04 UTC |
| 05e8ec1 | Michael Reed | 13 January 2006, 20:31:54 UTC | [SCSI] mptfusion - fc transport attributes Signed-off-by: Michael Reed <mdr@sgi.com> Signed-off-by: Eric Moore <Eric.Moore@lsil.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com> | 14 January 2006, 16:55:02 UTC |
| d158d26 | Jes Sorensen | 14 January 2006, 00:05:44 UTC | [SCSI] sem2mutex: scsi_transport_spi.c Convert the SCSI transport class code to use a mutex rather than a semaphore. Signed-off-by: Jes Sorensen <jes@sgi.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com> | 14 January 2006, 16:55:01 UTC |
| f20139b | James Bottomley | 13 January 2006, 21:36:25 UTC | [SCSI] fix up message/i2o/pci.c There was a use before initialisation of c->name Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com> | 14 January 2006, 16:54:59 UTC |
| 1ca00bb | Christoph Hellwig | 13 January 2006, 17:27:50 UTC | [SCSI] fusion: kzalloc / kcalloc conversion Convert kmalloc + memset to kzalloc or kcalloc in fusion. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com> | 14 January 2006, 16:54:58 UTC |
| eeb846c | Christoph Hellwig | 13 January 2006, 17:27:11 UTC | [SCSI] fusion: convert semaphores to mutexes Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com> | 14 January 2006, 16:54:57 UTC |
| 9a28f49 | Christoph Hellwig | 13 January 2006, 17:04:41 UTC | [SCSI] mptsas: support basic hotplug Adds hotplug support for SAS end devices. Unfortunately the fusion firmware doesn't generate similar events for expanders addition/removal so we can't support them yet. Eric has an idea about a clever scheme to find out about expander changes so that'll be added later on. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com> | 14 January 2006, 16:54:56 UTC |
| 9638d89 | Salyzyn, Mark | 12 January 2006, 13:31:57 UTC | [SCSI] I2O: move pci_request_regions() just behind pci_enable_device() The problem in dpt_i2o could be the pci config space accesses it triggers as it loads, dangerous to do if there is any I/O activity going on in the other driver (probable if a boot driver I guess). I approve this patch to dpt_i2o.c, and am applying it to the Adaptec branch of the driver. Thanks for the investigation Ryoji. --- In linux 2.6.15, data transfer does hang when both dpt_i2o and i2o_block drivers are loaded. It seems that location of pci_request_regions() are wrong. I moved it just behind pci_enable_device() like other drivers, and it becomes fine. Signed-off-by: Ryoji Kamei <kamei@miraclelinux.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com> | 14 January 2006, 16:54:54 UTC |
| 560c26c | Jack Hammer | 13 January 2006, 15:06:50 UTC | [SCSI] ips: Mode Sense (Caching Page ) fix To avoid the "sda: got wrong page" message, the ServeRAID driver should be setting flags indicating that the Mode Sense commands are not supported. Signed-off-by: Jack Hammer <jack_hammer@adaptec.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com> | 14 January 2006, 16:54:53 UTC |
| ad757cd | Andreas Herrmann | 13 January 2006, 01:26:11 UTC | [SCSI] zfcp: transport class adaptations II Replaced zfcp adapter attributes with fc_host attributes: fc_topology by port_type, physical_wwpn by permanent_port_name. Make use of fc_host attribute supported_speeds. Removed zfcp adapter attribute physical_s_id. Signed-off-by: Andreas Herrmann <aherrman@de.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com> | 14 January 2006, 16:54:52 UTC |
| f6cd94b | Andreas Herrmann | 05 January 2006, 08:59:34 UTC | [SCSI] zfcp: transport class adaptations Added host stats, removed superfluous get_starget_ functions, removed some attributes from zfcp specific sysfs tree (e.g. scsi_host_no, scsi_lun, wwnn and d_id). Host stats are given for the physical adapter port not for the virtual adapter. Reset stats is implemented in the device driver. Signed-off-by: Andreas Herrmann <aherrman@de.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com> | 14 January 2006, 16:54:50 UTC |
| 9eb69af | Maxim Shchetynin | 05 January 2006, 08:56:47 UTC | [SCSI] zfcp: handle unsolicited status notification lost Handle unsolicited adapter status that informs about loss of previous unsolicited status notification(s). Signed-off-by: Maxim Shchetynin <maxim@de.ibm.com> Signed-off-by: Andreas Herrmann <aherrman@de.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com> | 14 January 2006, 16:54:49 UTC |
| 6b7281d | Andreas Herrmann | 13 January 2006, 01:16:54 UTC | [SCSI] fc transport: add permanent_port_name fc_host attribute Add fc_host attribute permanent_port_name which is used to show the port name of the primary port - the port that initially logged into the fabric. For a virtual port (registered via the primary port with FDISC command) it is useful to know not only its (virtual) port name but also the permanent port name. Signed-off-by: Andreas Herrmann <aherrman@de.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com> | 14 January 2006, 16:54:48 UTC |
| a09c631 | Christoph Hellwig | 11 January 2006, 13:28:06 UTC | [SCSI] sr: split sr_audio_ioctl into specific helpers split each ioctl handled in sr_audio_ioctl into a function of it's own. This cleans the code up nicely, and allows various places in sr_ioctl to call these helpers directly instead of going through the multiplexer. Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: Jens Axboe <axboe@suse.de> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com> | 14 January 2006, 16:54:46 UTC |
| 776b23a | Christoph Hellwig | 06 January 2006, 17:34:07 UTC | [SCSI] always handle REQ_BLOCK_PC requests in common code LLDDs should never see REQ_BLOCK_PC requests, we can handle them just fine in the core code. There is a small behaviour change in that some check in sr's rw_intr are bypassed, but I consider the old behaviour a bug. Mike found this cleanup opportunity and provdided early patches, so all the credit goes to him, even if I redid the patches from scratch beause that was easier than forward-porting the old patches. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com> | 14 January 2006, 16:54:45 UTC |
| d405423 | Christoph Hellwig | 04 January 2006, 12:45:20 UTC | [SCSI] sas: fix removal of devices behind expanders We need to iterate over all children when removing and expander, else stale objects will be around after host removal. This fixes the oops Eric Moore saw when removing and reloading mptsas. Also don't try the scsi_remove_target call unless operating on an end device. The current unconditional call is harmless but confusing. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com> | 14 January 2006, 16:54:44 UTC |
| eab9edd | Michael Hanselmann | 14 January 2006, 15:08:06 UTC | Input: HID - add support for fn key on Apple PowerBooks This patch implements support for the fn key on Apple PowerBooks using USB based keyboards and makes them behave like their ADB counterparts. Signed-off-by: Michael Hanselmann <linux-kernel@hansmi.ch> Acked-by: Rene Nussbaumer <linux-kernel@killerfox.forkbomb.ch> Acked-by: Johannes Berg <johannes@sipsolutions.net> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Acked-by: Vojtech Pavlik <vojtech@suse.cz> Signed-off-by: Dmitry Torokhov <dtor@mail.ru> | 14 January 2006, 15:08:06 UTC |
| 1e27ffd | Dmitry Torokhov | 14 January 2006, 05:28:04 UTC | Input: wacom - fix compile on PowerPC Rename G4 (new Graphire4) to WACOM_G4 to avoid clashes on PowerPC Signed-off-by: Dmitry Torokhov <dtor@mail.ru> | 14 January 2006, 05:28:04 UTC |
| 5fce9d7 | Dmitry Torokhov | 14 January 2006, 05:27:51 UTC | Input: HID - add more simulation usages Signed-off-by: Dmitry Torokhov <dtor@mail.ru> | 14 January 2006, 05:27:51 UTC |
| f0d5c6f | Dmitry Torokhov | 14 January 2006, 05:27:37 UTC | Input: psmouse - attempt to re-synchronize mouse every 5 seconds This should help driver to deal vith KVMs that reset mice when switching between boxes. Signed-off-by: Dmitry Torokhov <dtor@mail.ru> | 14 January 2006, 05:27:37 UTC |
| b65d0d1 | Dmitry Torokhov | 14 January 2006, 05:26:15 UTC | Input: HID - fix an oops in PID initialization code Signed-off-by: Dmitry Torokhov <dtor@mail.ru> | 14 January 2006, 05:26:15 UTC |
| 940824b | Vojtech Pavlik | 14 January 2006, 05:25:39 UTC | Input: HID - add support for Cherry Cymotion keyboard The Cherry Cymotion is a special Linux keyboard made by Cherry, with only one little problem: it doesn't work with Linux. This patch (originally by hexten.net, cleaned up by me) makes it work including all the special keys. Signed-off-by: Vojtech Pavlik <vojtech@suse.cz> Signed-off-by: Dmitry Torokhov <dtor@mail.ru> | 14 January 2006, 05:25:39 UTC |
| 87530db | Linus Torvalds | 14 January 2006, 05:24:55 UTC | Merge git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc-merge | 14 January 2006, 05:24:55 UTC |
| 3dd01a8 | Vojtech Pavlik | 14 January 2006, 05:24:06 UTC | Input: i8042 - add Sony Vaio FSC-115b to MUX blacklist Signed-off-by: Vojtech Pavlik <vojtech@suse.cz> Signed-off-by: Dmitry Torokhov <dtor@mail.ru> | 14 January 2006, 05:24:06 UTC |
| d5f0790 | Paul Mackerras | 14 January 2006, 04:08:50 UTC | [PATCH] powerpc: Recognize /chaos bridge on old pmacs as PCI The first generation of PCI powermacs had a host bridge called /chaos which was for all intents and purposes a PCI host bridge, but has a device_type of "vci" in the device tree (presumably it's not really PCI at the hardware level or something). The OF parsing stuff in arch/powerpc/kernel/prom_parse.c currently doesn't recognize it as a PCI bridge, which means that controlfb.c can't get its device addresses. This makes prom_parse.c recognize a device_type of "vci" as indicating a PCI host bridge. With this, controlfb works again. Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org> | 14 January 2006, 04:08:50 UTC |
| b4e7de0 | Paul Mackerras | 14 January 2006, 04:06:51 UTC | powerpc: Avoid unaligned loads and stores in boot memcpy code The 601 processor will generate an alignment exception for accesses which cross a page boundary. In the boot wrapper code, OF is still handling all exceptions, and it doesn't have an alignment exception handler that emulates the instruction and continues. This changes the memcpy and memmove routines in the boot wrapper to avoid doing unaligned accesses. If the source and destination are misaligned with respect to each other, we just copy one byte at a time. Signed-off-by: Paul Mackerras <paulus@samba.org> | 14 January 2006, 04:06:51 UTC |
| 66a45dd | Paul Mackerras | 14 January 2006, 04:04:06 UTC | powerpc: Make COFF zImages for old 32-bit powermacs This adds code to build zImage.coff and/or zImage.initrd.coff when CONFIG_PPC32 and CONFIG_PPC_PMAC are defined. It also restructures the OF client code and adds some workarounds for OF quirks on the older machines. Signed-off-by: Paul Mackerras <paulus@samba.org> | 14 January 2006, 04:04:06 UTC |
| 3687457 | David Woodhouse | 14 January 2006, 00:15:19 UTC | [PATCH] powerpc: macio-adb build fix This makes macio-adb.c build again. Entirely untested. Signed-off-by: David Woodhouse <dwmw2@infradead.org> Signed-off-by: Paul Mackerras <paulus@samba.org> | 14 January 2006, 02:19:18 UTC |
| 575e321 | David Woodhouse | 14 January 2006, 00:13:49 UTC | [PATCH] powerpc: Make CHRP build again This makes CHRP build again, although it's untested because my Pegasos is currently in pieces. Signed-off-by: David Woodhouse <dwmw2@infradead.org> Signed-off-by: Paul Mackerras <paulus@samba.org> | 14 January 2006, 02:19:18 UTC |
| a148058 | Linus Torvalds | 14 January 2006, 01:13:44 UTC | Merge master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6 | 14 January 2006, 01:13:44 UTC |
| 91dc182 | Dave C Boutcher | 14 January 2006, 00:39:24 UTC | [PATCH] powerpc: special-case ibm,suspend-me RTAS call Handle the ibm,suspend-me RTAS call specially. It needs to be wrapped in a set of synchronization hypervisor calls (H_Join). When the H_Join calls are made on all CPUs, the intent is that only one will return with H_Continue, meaning that he is the "last man standing". That CPU then issues the ibm,suspend-me call. What is interesting, of course, is that the CPU running when the rtas syscall is made, may NOT be the CPU that ultimately executes the ibm,suspend-me rtas call. Signed-off-by: Dave Boutcher <sleddog@us.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org> | 14 January 2006, 01:04:25 UTC |
| 91f62a2 | Paul Mackerras | 14 January 2006, 00:17:32 UTC | ppc: Remove duplicate export of get_wchan The arch/powerpc version of process.c exports get_wchan itself. When I moved ARCH=ppc over to using arch/powerpc/kernel/process.c the get_wchan export in arch/ppc/kernel/ppc_ksyms.c became redundant, so remove it. Signed-off-by: Paul Mackerras <paulus@samba.org> (cherry picked from 9871166ad692121d6b944159ef3f053570158ea8 commit) | 14 January 2006, 00:48:29 UTC |
| 2e10c84 | David Brownell | 11 January 2006, 19:23:49 UTC | [PATCH] SPI: add spi_butterfly driver This adds a bitbanging parport based adaptor cable for AVR Butterfly, giving SPI links to its DataFlash chip and (eventually) firmware running in the card. Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> | 14 January 2006, 00:29:56 UTC |
| 5d870c8 | Andrew Morton | 11 January 2006, 19:23:49 UTC | [PATCH] spi: remove fastcall crap gcc4 generates warnings when a non-FASTCALL function pointer is assigned to a FASTCALL one. Perhaps it has taste. Cc: David Brownell <david-b@pacbell.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> | 14 January 2006, 00:29:56 UTC |
| 7111763 | David Brownell | 08 January 2006, 21:34:29 UTC | [PATCH] spi: misc fixes This collects some small SPI patches that seem to be missing from the MM tree: - spi_butterfly kbuild hooks got dropped somehow; this restores them - quick fix for a (theoretical?) m25p80_write() oops noted by Andrew - quick fix for a potential config-specific oops for mtd_dataflash() - minor doc tweaks Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> | 14 January 2006, 00:29:56 UTC |
| 8275c64 | Vitaly Wool | 08 January 2006, 21:34:28 UTC | [PATCH] spi: use linked lists rather than an array This makes the SPI core and its users access transfers in the SPI message structure as linked list not as an array, as discussed on LKML. From: David Brownell <dbrownell@users.sourceforge.net> Updates including doc, bugfixes to the list code, add spi_message_add_tail(). Plus, initialize things _before_ grabbing the locks in some cases (in case it grows more expensive). This also merges some bitbang updates of mine that didn't yet make it into the mm tree. Signed-off-by: Vitaly Wool <vwool@ru.mvista.com> Signed-off-by: Dmitry Pervushin <dpervushin@gmail.com> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> | 14 January 2006, 00:29:56 UTC |
| 2f9f762 | Mike Lavender | 08 January 2006, 21:34:27 UTC | [PATCH] spi: M25 series SPI flash This was originally a driver for the ST M25P80 SPI flash. It's been updated slightly to handle other M25P series chips. For many of these chips, the specific type could be probed, but for now this just requires static setup with flash_platform_data that lists the chip type (size, format) and any default partitioning to use. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Cc: Mike Lavender <mike@steroidmicros.com> Cc: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> | 14 January 2006, 00:29:55 UTC |
| 9904f22 | David Brownell | 08 January 2006, 21:34:26 UTC | [PATCH] spi: add spi_bitbang driver This adds a bitbanging spi master, hooking up to board/adapter-specific glue code which knows how to set and read the signals (gpios etc). This code kicks in after the glue code creates a platform_device with the right platform_data. That data includes I/O loops, which will usually come from expanding an inline function (provided in the header). One goal is that the I/O loops should be easily optimized down to a few GPIO register accesses, in common cases, for speed and minimized overhead. This understands all the currently defined protocol tweaking options in the SPI framework, and might eventually serve as as reference implementation. - different word sizes (1..32 bits) - differing clock rates - SPI modes differing by CPOL (affecting chip select and I/O loops) - SPI modes differing by CPHA (affecting I/O loops) - delays (usecs) after transfers - temporarily deselecting chips in mid-transfer A lot of hardware could work with this framework, though common types of controller can't reach peak performance without switching to a driver structure that supports pipelining of transfers (e.g. DMA queues) and maybe controllers (e.g. IRQ driven). Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> | 14 January 2006, 00:29:55 UTC |
| 2e5a7bd | David Brownell | 08 January 2006, 21:34:25 UTC | [PATCH] spi: ads7836 uses spi_driver This updates the ads7864 driver to use the new "spi_driver" struct, and includes some minor unrelated cleanup. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> | 14 January 2006, 00:29:55 UTC |
| 0c86846 | David Brownell | 08 January 2006, 21:34:25 UTC | [PATCH] SPI core tweaks, bugfix This includes various updates to the SPI core: - Fixes a driver model refcount bug in spi_unregister_master() paths. - The spi_master structures now have wrappers which help keep drivers from needing class-level get/put for device data or for refcounts. - Check for a few setup errors that would cause oopsing later. - Docs say more about memory management. Highlights the use of DMA-safe i/o buffers, and zero-initializing spi_message and such metadata. - Provide a simple alloc/free for spi_message and its spi_transfer; this is only one of the possible memory management policies. Nothing to break code that already works. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> | 14 January 2006, 00:29:55 UTC |
| b885244 | David Brownell | 08 January 2006, 21:34:23 UTC | [PATCH] spi: add spi_driver to SPI framework This is a refresh of the "Simple SPI Framework" found in 2.6.15-rc3-mm1 which makes the following changes: * There's now a "struct spi_driver". This increase the footprint of the core a bit, since it now includes code to do what the driver core was previously handling directly. Documentation and comments were updated to match. * spi_alloc_master() now does class_device_initialize(), so it can at least be refcounted before spi_register_master(). To match, spi_register_master() switched over to class_device_add(). * States explicitly that after transfer errors, spi_devices will be deselected. We want fault recovery procedures to work the same for all controller drivers. * Minor tweaks: controller_data no longer points to readonly data; prevent some potential cast-from-null bugs with container_of calls; clarifies some existing kerneldoc, And a few small cleanups. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> | 14 January 2006, 00:29:54 UTC |
| 1d6432f | David Brownell | 08 January 2006, 21:34:22 UTC | [PATCH] spi: mtd dataflash driver This is a conversion of the AT91rm9200 DataFlash MTD driver to use the lightweight SPI framework, and no longer be AT91-specific. It compiles down to less than 3KBytes on ARM. The driver allows board-specific init code to provide platform_data with the relevant MTD partitioning information, and hotplugs. This version has been lightly tested. Its parent at91_dataflash driver has been pretty well banged on, although kernel.org JFFS2 dataflash support was acting broken the last time I tried it. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> | 14 January 2006, 00:29:54 UTC |
| ffa458c | David Brownell | 08 January 2006, 21:34:21 UTC | [PATCH] spi: ads7846 driver This is a driver for the ADS7846 touchscreen sensor, derived from the corgi_ts and omap_ts drivers. Key differences from those two: - Uses the new SPI framework (minimalist version) - <linux/spi/ads7846.h> abstracts board-specific touchscreen info - Sysfs attributes for the temperature and voltage sensors - Uses fewer ARM-specific IRQ primitives The temperature and voltage sensors show up in sysfs like this: $ pwd /sys/devices/platform/omap-uwire/spi2.0 $ ls bus@ input:event0@ power/ temp1 vbatt driver@ modalias temp0 vaux $ cat modalias ads7846 $ cat temp0 991 $ cat temp1 1177 $ So far only basic testing has been done. There's a fair amount of hardware that uses this sensor, and which also runs Linux, which should eventually be able to use this driver. One portability note may be of special interest. It turns out that not all SPI controllers are happy issuing requests that do things like "write 8 bit command, read 12 bit response". Most of them seem happy to handle various word sizes, so the issue isn't "12 bit response" but rather "different rx and tx write sizes", despite that being a common MicroWire convention. So this version of the driver no longer reads 12 bit native-endian words; it reads 16-bit big-endian responses, then byteswaps them and shifts the results to discard the noise. Signed-off-by: David Brownell <david-b@pacbell.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> | 14 January 2006, 00:29:54 UTC |
