Revision 6460495709aeb651896bc8e5c134b2e4ca7d34a8 authored by James Wang on 08 June 2017, 06:52:51 UTC, committed by Jens Axboe on 08 June 2017, 14:04:18 UTC
While installing SLES-12 (based on v4.4), I found that the installer
will stall for 60+ seconds during LVM disk scan. The root cause was
determined to be the removal of a bound device check in loop_flush()
by commit b5dd2f6047ca ("block: loop: improve performance via blk-mq").
Restoring this check, examining ->lo_state as set by loop_set_fd()
eliminates the bad behavior.
Test method:
modprobe loop max_loop=64
dd if=/dev/zero of=disk bs=512 count=200K
for((i=0;i<4;i++))do losetup -f disk; done
mkfs.ext4 -F /dev/loop0
for((i=0;i<4;i++))do mkdir t$i; mount /dev/loop$i t$i;done
for f in `ls /dev/loop[0-9]*|sort`; do \
echo $f; dd if=$f of=/dev/null bs=512 count=1; \
done
Test output: stock patched
/dev/loop0 18.1217e-05 8.3842e-05
/dev/loop1 6.1114e-05 0.000147979
/dev/loop10 0.414701 0.000116564
/dev/loop11 0.7474 6.7942e-05
/dev/loop12 0.747986 8.9082e-05
/dev/loop13 0.746532 7.4799e-05
/dev/loop14 0.480041 9.3926e-05
/dev/loop15 1.26453 7.2522e-05
Note that from loop10 onward, the device is not mounted, yet the
stock kernel consumes several orders of magnitude more wall time
than it does for a mounted device.
(Thanks for Mike Galbraith <efault@gmx.de>, give a changelog review.)
Reviewed-by: Hannes Reinecke <hare@suse.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: James Wang <jnwang@suse.com>
Fixes: b5dd2f6047ca ("block: loop: improve performance via blk-mq")
Signed-off-by: Jens Axboe <axboe@fb.com>
1 parent 6679a90
Kbuild
#
# Kbuild for top-level directory of the kernel
# This file takes care of the following:
# 1) Generate bounds.h
# 2) Generate timeconst.h
# 3) Generate asm-offsets.h (may need bounds.h and timeconst.h)
# 4) Check for missing system calls
# 5) Generate constants.py (may need bounds.h)
#####
# 1) Generate bounds.h
bounds-file := include/generated/bounds.h
always := $(bounds-file)
targets := kernel/bounds.s
# We use internal kbuild rules to avoid the "is up to date" message from make
kernel/bounds.s: kernel/bounds.c FORCE
$(Q)mkdir -p $(dir $@)
$(call if_changed_dep,cc_s_c)
$(obj)/$(bounds-file): kernel/bounds.s FORCE
$(call filechk,offsets,__LINUX_BOUNDS_H__)
#####
# 2) Generate timeconst.h
timeconst-file := include/generated/timeconst.h
targets += $(timeconst-file)
quiet_cmd_gentimeconst = GEN $@
define cmd_gentimeconst
(echo $(CONFIG_HZ) | bc -q $< ) > $@
endef
define filechk_gentimeconst
(echo $(CONFIG_HZ) | bc -q $< )
endef
$(obj)/$(timeconst-file): kernel/time/timeconst.bc FORCE
$(call filechk,gentimeconst)
#####
# 3) Generate asm-offsets.h
#
offsets-file := include/generated/asm-offsets.h
always += $(offsets-file)
targets += arch/$(SRCARCH)/kernel/asm-offsets.s
# We use internal kbuild rules to avoid the "is up to date" message from make
arch/$(SRCARCH)/kernel/asm-offsets.s: arch/$(SRCARCH)/kernel/asm-offsets.c \
$(obj)/$(timeconst-file) $(obj)/$(bounds-file) FORCE
$(Q)mkdir -p $(dir $@)
$(call if_changed_dep,cc_s_c)
$(obj)/$(offsets-file): arch/$(SRCARCH)/kernel/asm-offsets.s FORCE
$(call filechk,offsets,__ASM_OFFSETS_H__)
#####
# 4) Check for missing system calls
#
always += missing-syscalls
targets += missing-syscalls
quiet_cmd_syscalls = CALL $<
cmd_syscalls = $(CONFIG_SHELL) $< $(CC) $(c_flags) $(missing_syscalls_flags)
missing-syscalls: scripts/checksyscalls.sh $(offsets-file) FORCE
$(call cmd,syscalls)
#####
# 5) Generate constants for Python GDB integration
#
extra-$(CONFIG_GDB_SCRIPTS) += build_constants_py
build_constants_py: $(obj)/$(timeconst-file) $(obj)/$(bounds-file)
@$(MAKE) $(build)=scripts/gdb/linux $@
# Keep these three files during make clean
no-clean-files := $(bounds-file) $(offsets-file) $(timeconst-file)
Computing file changes ...
