Revision 649f2bd1dbc5702edbc4cbacf44d25ba3ccd8cc9 authored by Felix Ruess on 09 July 2013, 09:34:43 UTC, committed by Felix Ruess on 09 July 2013, 19:17:16 UTC
- krooz: don't use TIM2 for PWM - change to 6 ticks per usec to fit all frequencies - on the F1 we assume to run at 72MHz for HCLK and both timer clocks TIM1 -> APB2 = HCLK = 72MHz TIM2 -> 2 * APB1 = 2 * 36MHz = 72MHz - on the F4 we assume 2 * AHB clock: TIM1 -> 2 * APB2 = 168MHz TIM2 -> 2 * APB1 = 84MHz
1 parent 60a6d89
humid_dpicco.xml
<!DOCTYPE module SYSTEM "module.dtd">
<module name="humid_dpicco" dir="meteo">
<doc>
<description>
DigiPicco humidity sensor.
This reads the values for humidity and temperature from the IST DigiPicco sensor through I2C.
</description>
</doc>
<header>
<file name="humid_dpicco.h"/>
</header>
<init fun="dpicco_init()"/>
<periodic fun="dpicco_periodic()" freq="4."/>
<event fun="dpicco_event()"/>
<makefile target="ap">
<file name="humid_dpicco.c"/>
</makefile>
</module>
![swh spinner](/static/img/swh-spinner.gif)
Computing file changes ...