Revision 66d8e606a8d996ded60bc81d5edf319142a5fad9 authored by Ron Burkey on 04 October 2021, 11:49:55 UTC, committed by Ron Burkey on 04 October 2021, 11:49:55 UTC
EXECUTIVE.agc
### FILE="Main.annotation"
## Copyright: Public domain.
## Filename: EXECUTIVE.agc
## Purpose: This program is designed to extensively test the Apollo Guidance Computer
## (specifically the LM instantiation of it). It is built on top of a heavily
## stripped-down Aurora 12, with all code ostensibly added by the DAP Group
## removed. Instead Borealis expands upon the tests provided by Aurora,
## including corrected tests from Retread 44 and tests from Ron Burkey's
## Validation.
## Assembler: yaYUL
## Contact: Mike Stewart <mastewar1@gmail.com>.
## Website: www.ibiblio.org/apollo/index.html
## Mod history: 2016-12-20 MAS Created from Aurora 12 (with much DAP stuff removed).
## 2017-06-28 MAS Pulled in changes needed for BLK2->AGC from Sunburst 37
SETLOC ENDSUBSF
# TO ENTER A JOB REQUEST REQUIRING NO VAC AREA:
NOVAC TS NEWPRIO # SAVE PRIORITY OF NEW JOB.
EXTEND
INDEX Q # Q WILL BE UNDISTURBED THROUGHOUT.
DCA 0 # 2CADR OF JOB ENTERED.
DXCH NEWLOC
CAF EXECBANK
XCH FBANK
TS EXECTEM1
TCF NOVAC2 # ENTER EXECUTIVE BANK.
# TO ENTER A JOB REQUEST REQUIRING A VAC AREA - E.G., ALL (PARTIALLY) INTERPRETIVE JOBS.
FINDVAC TS NEWPRIO
EXTEND
INDEX Q
DCA 0
DXCH NEWLOC
CAF EXECBANK
XCH FBANK
TCF FINDVAC2 # OFF TO EXECUTIVE SWITCHED-BANK.
# TO SUSPEND A BASIC JOB SO A HIGHER PRIORITY JOB MAY BE SERVICED:
CHANG1 CAF EXECBANK
TS L
CA Q
LXCH BBANK
+4 INHINT
TCF CHANJOB
# TO SUSPEND AN INTERPRETIVE JOB:
CHANG2 CAF EXECBANK
# ITRACE (4) REFERS TO "CHANG2".
TS BBANK
CS LOC # NEGATIVE LOC SHOWS JOB = INTERPRETIVE.
LXCH BANKSET # BANKSET, NOT BBANK, HAS RIGHT CONTENTS.
TCF CHANG1 +4
# TO VOLUNTARILY SUSPEND A JOB UNTIL THE COMPLETION OF SOME ANTICIPATED EVENT (I/O EVENT ETC.):
JOBSLEEP TS LOC
CAF EXECBANK
TS FBANK
TCF JOBSLP1
# TO AWAKEN A JOB PUT TO SLEEP IN THE ABOVE FASHION:
JOBWAKE TS NEWLOC
CS TWO # EXIT IS VIA FINDVAC/NOVAC PROCEDURES.
ADS Q
CAF EXECBANK
XCH FBANK
TCF JOBWAKE2
# TO CHANGE THE PRIORITY OF A JOB CURRENTLY UNDER EXECUTION:
PRIOCHNG INHINT # NEW PRIORITY ARRIVES IN A. RETURNS TO
TS NEWPRIO # CALLER AS SOON AS NEW JOB PRIORITY IS
CAF EXECBANK # HIGHEST. PREPARE FOR POSSIBLE BASIC-
XCH BBANK # STYLE CHANGE-JOB.
TS BANKSET
CA Q
TCF PRIOCH2
# TO FREE THE DISPLAY BEFORE ENDOFJOB:
EJFREE TC FREEDSP
# TO REMOVE A JOB FROM EXECUTIVE CONSIDERATIONS:
ENDOFJOB CAF EXECBANK
TS FBANK
TCF ENDJOB1
ENDFIND CA EXECTEM1 # RETURN TO CALLER AFTER JOB ENTRY
TS FBANK # COMPLETE.
TCF Q+2
EXECBANK CADR FINDVAC2
# LOCATE AN AVAILABLE VAC AREA.
SETLOC ENDINTS1
FINDVAC2 TS EXECTEM1 # (SAVE CALLER'S BANK FIRST.)
CCS VAC1USE
TCF VACFOUND
CCS VAC2USE
TCF VACFOUND
CCS VAC3USE
TCF VACFOUND
CCS VAC4USE
TCF VACFOUND
CCS VAC5USE
TCF VACFOUND
TC ABORT
OCT 1201 # NO VAC AREAS.
VACFOUND AD TWO # RESERVE THIS VAC AREA BY STORING A ZERO
ZL # IN ITS VAC USE REGISTER AND STORE THE
INDEX A # ADDRESS OF THE FIRST WORD OF IT IN THE
LXCH 0 -1 # LOW NINE BITS OF THE PRIORITY WORD.
ADS NEWPRIO
NOVAC2 CAF ZERO # NOVAC ENTERS HERE. FIND A CORE SET.
TS LOCCTR
CAF NO.CORES # SEVEN SETS OF ELEVEN REGISTERS EACH.
NOVAC3 TS EXECTEM2
INDEX LOCCTR
CCS PRIORITY # EACH PRIORITY REGISTER CONTAINS -0 IF
TCF NEXTCORE # THE CORRESPONDING CORE SET IS AVAILABLE.
NO.CORES DEC 6
TCF NEXTCORE # AN ACTIVE JOB HAS A POSITIVE PRIORITY
# BUT A DORMANT JOB'S PRIORITY IS NEGATIVE
CORFOUND CA NEWPRIO # SET THE PRIORITY OF THIS JOB IN THE CORE
INDEX LOCCTR # SET'S PRIORITY REGISTER AND SET THE
TS PRIORITY # JOB'S PUSH-DOWN POINTER AT THE BEGINNING
MASK LOW9 # OF THE WORK AREA AND OVERFLOW INDICATOR
INDEX LOCCTR
TS PUSHLOC # OFF TO PREPARE FOR INTERPRETIVE PROGRAMS
CCS LOCCTR # IF CORE SET ZERO IS BEING LOADED, SET UP
TCF SETLOC # OVFIND AND FIXLOC IMMEDIATELY.
TS OVFIND
CA PUSHLOC
TS FIXLOC
SPECTEST CCS NEWJOB # SEE IF ANY ACTIVE JOBS WAITING (RARE).
TCF SETLOC # MUST BE AWAKENED BUT UNCHANGED JOB.
TC CCSHOLE
TC CCSHOLE
TS NEWJOB # +0 SHOWS ACTIVE JOB ALREADY SET.
DXCH NEWLOC
DXCH LOC
TCF ENDFIND
SETLOC DXCH NEWLOC # SET UP THE LOCATION REGISTERS FOR THIS
INDEX LOCCTR
DXCH LOC
INDEX NEWJOB # THIS INDEX INSTRUCTION INSURES THAT THE
CS PRIORITY # HIGHEST ACTIVE PRIORITY WILL BE COMPARED
AD NEWPRIO # WITH THE NEW PRIORITY TO SEE IF NEWJOB
EXTEND # SHOULD BE SET TO SIGNAL A SWITCH.
BZMF ENDFIND
CA LOCCTR # LOCCTR IS LEFT SET AT THIS CORE SET IF
TS NEWJOB # THE CALLER WANTS TO LOAD ANY MPAC
TCF ENDFIND # REGISTERS, ETC.
NEXTCORE CAF COREINC
ADS LOCCTR
CCS EXECTEM2
TCF NOVAC3
TC ABORT # NO CORE SETS.
OCT 1202
# THE FOLLOWING ROUTINE SWAPS CORE SET 0 WITH THAT WHOSE RELATIVE ADDRESS IS IN NEWJOB.
-1 DXCH LOC
CHANJOB INDEX NEWJOB # LOC ARRIVES IN A AND BBANK IN L.
DXCH LOC
DXCH LOC
DXCH MPAC # SWAP MULTI-PURPOSE ACCUMULATOR AREAS.
INDEX NEWJOB
DXCH MPAC
DXCH MPAC
DXCH MPAC +2
INDEX NEWJOB
DXCH MPAC +2
DXCH MPAC +2
DXCH MPAC +4
INDEX NEWJOB
DXCH MPAC +4
DXCH MPAC +4
DXCH MPAC +6
INDEX NEWJOB
DXCH MPAC +6
DXCH MPAC +6
CAF ZERO
XCH OVFIND # MAKE PUSHLOC NEGATIVE IF OVFIND NZ.
EXTEND
BZF +3
CS PUSHLOC
TS PUSHLOC
DXCH PUSHLOC
INDEX NEWJOB
DXCH PUSHLOC
DXCH PUSHLOC # SWAPS PUSHLOC AND PRIORITY.
CAF LOW9 # SET FIXLOC TO BASE OF VAC AREA.
MASK PRIORITY
TS FIXLOC
CCS PUSHLOC # SET OVERFLOW INDICATOR ACCORDING TO
CAF ZERO
TCF ENDPRCHG -1
CS PUSHLOC
TS PUSHLOC
CAF ONE
XCH OVFIND
TS NEWJOB
ENDPRCHG RELINT
DXCH LOC # BASIC JOBS HAVE POSITIVE ADDRESSES, SO
EXTEND # DISPATCH WITH A DTCB.
BZMF +2 # IF INTERPRETIVE, SET UP EBANK, ETC.
DTCB
COM # EPILOGUE TO JOB CHANGE FOR INTERPRETIVE
AD ONE
TS LOC # RESUME.
TCF INTRSM
# COMPLETE JOBSLEEP PREPARATIONS.
JOBSLP1 INHINT
CS PRIORITY # NNZ PRIORITY SHOWS JOB ASLEEP.
TS PRIORITY
CAF LOW7
MASK BBANK
TS BANKSET
CS ZERO
JOBSLP2 TS BUF +1 # HOLDS - HIGHEST PRIORITY.
TCF EJSCAN # SCAN FOR HIGHEST PRIORITY ALA ENDOFJOB.
# TO WAKE UP A JOB, EACH CORE SET IS FOUND TO LOCATE ALL JOBS WHICH ARE ASLEEP. IF THE FCADR IN THE
# LOC REGISTER OF ANY SUCH JOB MATCHES THAT SUPPLIED BY THE CALLER, THAT JOB IS AWAKENED. IF NO JOB IS FOUND,
# LOCCTR IS SET TO -1 AND NO FURTHER ACTION TAKES PLACE.
JOBWAKE2 TS EXECTEM1
CAF ZERO # BEGIN CORE SET SCAN.
TS LOCCTR
CAF NO.CORES
JOBWAKE4 TS EXECTEM2
INDEX LOCCTR
CCS PRIORITY
TCF JOBWAKE3 # ACTIVE JOB - CHECK NEXT CORE SET.
COREINC DEC 12 # 12 REGISTERS PER CORE SET.
TCF WAKETEST # SLEEPING JOB - SEE IF CADR MATCHES.
JOBWAKE3 CAF COREINC
ADS LOCCTR
CCS EXECTEM2
TCF JOBWAKE4
CS ONE # EXIT IF SLEEPING JOB NOT FOUND.
TS LOCCTR
TCF ENDFIND
WAKETEST CS NEWLOC
INDEX LOCCTR
AD LOC
EXTEND
BZF +2 # IF MATCH.
TCF JOBWAKE3 # EXAMINE NEXT CORE SET IF NO MATCH.
INDEX LOCCTR # RE-COMPLEMENT PRIORITY TO SHOW JOB AWAKE
CS PRIORITY
TS NEWPRIO
INDEX LOCCTR
TS PRIORITY
CS FBANKMSK # MAKE UP THE 2CADR OF THE WAKE ADDRESS
MASK NEWLOC # USING THE CADR IN NEWLOC AND THE EBANK
AD 2K # HALF OF BBANK SAVED IN BANKSET.
XCH NEWLOC
MASK FBANKMSK
INDEX LOCCTR
AD BANKSET
TS NEWLOC +1
CCS LOCCTR # SPECIAL TREATMENT IF THIS JOB WAS
TCF SETLOC # ALREADY IN THE RUN (0) POSITION.
TCF SPECTEST
# PRIORITY CHANGE. CHANGE THE CONTENTS OF PRIORITY AND SCAN FOR THE JOB OF HIGHEST PRIORITY.
PRIOCH2 TS LOC
CAF ZERO # SET FLAG TO TELL ENDJOB SCANNER IF THIS
TS BUF # JOB IS STILL HIGHEST PRIORITY.
CAF LOW9
MASK PRIORITY
AD NEWPRIO
TS PRIORITY
COM
TCF JOBSLP2 # AND TO EJSCAN.
# RELEASE THIS CORE SET AND VAC AREA AND SCAN FOR THE JOB OF HIGHEST ACTIVE PRIORITY.
ENDJOB1 INHINT
CS ZERO
TS BUF +1
XCH PRIORITY
MASK LOW9
CCS A
INDEX A
TS 0
EJSCAN CCS PRIORITY +12D
TC EJ1
TC CCSHOLE
TCF +1
CCS PRIORITY +24D # EXAMINE EACH PRIORITY REGISTER TO FIND
TC EJ1 # THE JOB OF HIGHEST ACTIVE PRIORITY.
TC CCSHOLE
TCF +1
CCS PRIORITY +36D
TC EJ1
-CCSPR -CCS PRIORITY
TCF +1
CCS PRIORITY +48D
TC EJ1
TC CCSHOLE
TCF +1
CCS PRIORITY +60D
TC EJ1
TC CCSHOLE
TCF +1
CCS PRIORITY +72D
TC EJ1
TC CCSHOLE
TCF +1
# EVALUATE THE RESULTS OF THE SCAN.
CCS BUF +1 # SEE IF THERE ARE ANY ACTIVE JOBS WAITING
TC CCSHOLE
TC CCSHOLE
TCF +2
TCF DUMMYJOB
CCS BUF # BUF IS ZERO IF THIS IS A PRIOCHNG AND
TCF +2 # CHANGED PRIORITY IS STILL HIGHEST.
TCF ENDPRCHG
INDEX A # OTHERWISE, SET NEWJOB TO THE RELATIVE
CAF 0 -1 # ADDRESS OF THE NEW JOB'S CORE SET.
AD -CCSPR
TS NEWJOB
TCF CHANJOB -1
EJ1 TS BUF +2
AD BUF +1 # - OLD HIGH PRIORITY.
CCS A
CS BUF +2
TCF EJ2 # NEW HIGH PRIORITY.
NOOP
INDEX Q
TC 2 # PROCEED WITH SEARCH.
EJ2 TS BUF +1
EXTEND
QXCH BUF # FOR LOCATING CCS PRIORITY + X INSTR.
INDEX BUF
TC 2
ENDEXECS EQUALS
# IDLING AND COMPUTER ACTIVITY (GREEN) LIGHT MAINTENANCE. THE IDLING ROUTINE IS NOT A JOB IN ITSELF,
# BUT RATHER A SUBROUTINE OF THE EXECUTIVE.
SETLOC EXECBANK +1
EBANK= SELFRET # SELF-CHECK STORAGE IN EBANK.
DUMMYJOB CS ZERO # SET NEWJOB TO -0 FOR IDLING.
TS NEWJOB
RELINT
CS TWO # TURN OFF THE ACTIVITY LIGHT.
EXTEND
WAND DSALMOUT
TCF CHECKNJ +2
CHECKNJ EXTEND # SPECIAL NEWJOB TEST FOR SELF-CHECK,
QXCH SELFRET # WHICH RUNS UNDER EXECUTIVE CONTROL,
+2 CCS NEWJOB # BUT DOES NOT HAVE A JOBS CORE REGISTERS.
TCF NUCHANGE # NEW JOB REQUIRING A CHANGE JOB.
CAF TWO # NEW JOB ALREADY IN POSITION FOR
TCF NUDIRECT # EXECUTION.
ADVAN CAF SELFBANK # (SIMULATOR ADVAN IF NEWJOB = 77777).
TS BBANK
TC SELFRET
NUDIRECT EXTEND # TURN THE GREEN LIGHT BACK ON.
WOR DSALMOUT
DXCH LOC # JOBS STARTED IN THIS FASHION MUST BE
DTCB # BASIC.
NUCHANGE CAF TWO
EXTEND
WOR DSALMOUT
CAF EXECBANK # SWAP CORE SETS.
TS FBANK
INHINT # CHANGE JOBS
TCF CHANJOB -1
EBANK= SELFRET
SELFBANK BBCON SELFCHK
# PRIORITY CONSTANTS (NOTE IN FIXED-FIXED).
PRIO1 EQUALS BIT10
PRIO2 EQUALS BIT11
PRIO3 OCT 03000
PRIO4 EQUALS BIT12
PRIO5 OCT 05000
PRIO6 OCT 06000
PRIO7 OCT 07000
PRIO10 EQUALS BIT13
PRIO11 OCT 11000
PRIO12 OCT 12000
PRIO13 OCT 13000
PRIO14 OCT 14000
PRIO15 OCT 15000
PRIO16 OCT 16000
PRIO17 OCT 17000
PRIO20 EQUALS BIT14
PRIO21 OCT 21000
PRIO22 OCT 22000
PRIO23 OCT 23000
PRIO24 OCT 24000
PRIO25 OCT 25000
PRIO26 OCT 26000
PRIO27 OCT 27000
PRIO30 OCT 30000
PRIO31 OCT 31000
PRIO32 OCT 32000
PRIO33 OCT 33000
PRIO34 OCT 34000
PRIO35 OCT 35000
PRIO36 OCT 36000
PRIO37 OCT 37000
ENDEXECF EQUALS
Computing file changes ...
