#include "pkt-line.h"
#include "sideband.h"

/*
 * Receive multiplexed output stream over git native protocol.
 * in_stream is the input stream from the remote, which carries data
 * in pkt_line format with band designator.  Demultiplex it into out
 * and err and return error appropriately.  Band #1 carries the
 * primary payload.  Things coming over band #2 is not necessarily
 * error; they are usually informative message on the standard error
 * stream, aka "verbose").  A message over band #3 is a signal that
 * the remote died unexpectedly.  A flush() concludes the stream.
 */
int recv_sideband(const char *me, int in_stream, int out, int err)
{
	char buf[7 + LARGE_PACKET_MAX + 1];
	strcpy(buf, "remote:");
	while (1) {
		int band, len;
		len	= packet_read_line(in_stream, buf+7, LARGE_PACKET_MAX);
		if (len == 0)
			break;
		if (len < 1) {
			len = sprintf(buf, "%s: protocol error: no band designator\n", me);
			safe_write(err, buf, len);
			return SIDEBAND_PROTOCOL_ERROR;
		}
		band = buf[7] & 0xff;
		len--;
		switch (band) {
		case 3:
			buf[7] = ' ';
			buf[8+len] = '\n';
			safe_write(err, buf, 8+len+1);
			return SIDEBAND_REMOTE_ERROR;
		case 2:
			buf[7] = ' ';
			safe_write(err, buf, 8+len);
			continue;
		case 1:
			safe_write(out, buf+8, len);
			continue;
		default:
			len = sprintf(buf,
				      "%s: protocol error: bad band #%d\n",
				      me, band);
			safe_write(err, buf, len);
			return SIDEBAND_PROTOCOL_ERROR;
		}
	}
	return 0;
}

/*
 * fd is connected to the remote side; send the sideband data
 * over multiplexed packet stream.
 */
ssize_t send_sideband(int fd, int band, const char *data, ssize_t sz, int packet_max)
{
	ssize_t ssz = sz;
	const char *p = data;

	while (sz) {
		unsigned n;
		char hdr[5];

		n = sz;
		if (packet_max - 5 < n)
			n = packet_max - 5;
		sprintf(hdr, "%04x", n + 5);
		hdr[4] = band;
		safe_write(fd, hdr, 5);
		safe_write(fd, p, n);
		p += n;
		sz -= n;
	}
	return ssz;
}