Revision 67d365a57a51fb9dece6a5ceb504aa381cae1e5b authored by Mark on 16 September 2014, 15:22:50 UTC, committed by Greg Kroah-Hartman on 19 September 2014, 22:01:38 UTC
The Adaptec USBConnect 2000 is another SCSI-USB converter which uses Shuttle Technology/SCM Microsystems chips. The US_FL_SCM_MULT_TARG quirk is required to use SCSI devices with ID other than 0. I don't have a USBConnect 2000, but based on the other entries for Shuttle/ SCM-based converters this patch is very likely correct. I used 0x0000 and 0x9999 for bcdDeviceMin and bcdDeviceMax because I'm not sure which bcdDevice value the product uses. Signed-off-by: Mark Knibbs <markk@clara.co.uk> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
1 parent 7312b5d
wm831x
Kernel driver wm831x-hwmon
==========================
Supported chips:
* Wolfson Microelectronics WM831x PMICs
Prefix: 'wm831x'
Datasheet:
http://www.wolfsonmicro.com/products/WM8310
http://www.wolfsonmicro.com/products/WM8311
http://www.wolfsonmicro.com/products/WM8312
Authors: Mark Brown <broonie@opensource.wolfsonmicro.com>
Description
-----------
The WM831x series of PMICs include an AUXADC which can be used to
monitor a range of system operating parameters, including the voltages
of the major supplies within the system. Currently the driver provides
reporting of all the input values but does not provide any alarms.
Voltage Monitoring
------------------
Voltages are sampled by a 12 bit ADC. Voltages in millivolts are 1.465
times the ADC value.
Temperature Monitoring
----------------------
Temperatures are sampled by a 12 bit ADC. Chip and battery temperatures
are available. The chip temperature is calculated as:
Degrees celsius = (512.18 - data) / 1.0983
while the battery temperature calculation will depend on the NTC
thermistor component.
Computing file changes ...
