| 6987427 | Thomas Hellstrom | 02 November 2011, 08:43:11 UTC | vmwgfx: Infrastructure for explicit placement Make it possible to use explicit placement (although not hooked up with a user-space interface yet) and relax the single framebuffer limit to only apply to implicit placement. Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> Reviewed-by: Jakob Bornecrantz <jakob@vmware.com> Signed-off-by: Dave Airlie <airlied@redhat.com> | 07 November 2011, 13:15:18 UTC |
| 1543b4d | Thomas Hellstrom | 02 November 2011, 08:43:10 UTC | vmwgfx: Make the preferred autofit mode have a 60Hz vrefresh Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> Reviewed-by: Jakob Bornecrantz <jakob@vmware.com> Signed-off-by: Dave Airlie <airlied@redhat.com> | 07 November 2011, 13:14:59 UTC |
| 0e708bc | Thomas Hellstrom | 02 November 2011, 08:43:09 UTC | vmwgfx: Remove screen object active list It isn't used for anything. Replace with an active bool. Also make a couple of functions return void instead of int since their return value wasn't checked anyway. Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> Reviewed-by: Jakbo Bornecrantz <jakob@vmware.com> Signed-off-by: Dave Airlie <airlied@redhat.com> | 07 November 2011, 13:14:31 UTC |
| d4528b8 | Thomas Hellstrom | 02 November 2011, 08:43:08 UTC | vmwgfx: Screen object cleanups Remove unused member. No need to pin / unpin fb. Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> Reviewed-by: Jakob Bornecrantz <jakob@vmware.com> Signed-off-by: Dave Airlie <airlied@redhat.com> | 07 November 2011, 13:14:11 UTC |
| c9a1be9 | Jerome Glisse | 03 November 2011, 15:16:49 UTC | drm/radeon/kms: consolidate GART code, fix segfault after GPU lockup V2 After GPU lockup VRAM gart table is unpinned and thus its pointer becomes unvalid. This patch move the unpin code to a common helper function and set pointer to NULL so that page update code can check if it should update GPU page table or not. That way bo still bound to GART can be unbound (pci_unmap_page for all there page) properly while there is no need to update the GPU page table. V2 move the test for null gart out of the loop, small optimization Signed-off-by: Jerome Glisse <jglisse@redhat.com> Signed-off-by: Dave Airlie <airlied@redhat.com> | 04 November 2011, 10:39:51 UTC |
| 0e2c978 | Alex Deucher | 02 November 2011, 22:08:25 UTC | drm/radeon/kms: don't poll forever if MC GDDR link training fails Bail if we hit the timeout limit. Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Dave Airlie <airlied@redhat.com> | 03 November 2011, 17:53:26 UTC |
| cf2aff6 | Alex Deucher | 28 October 2011, 20:07:36 UTC | drm/radeon/kms: fix DP setup on TRAVIS bridges Supposedly both NUTMEG and TRAVIS should use the same panel mode, but switching the panel mode for TRAVIS gets things working. Fixes: https://bugs.freedesktop.org/show_bug.cgi?id=41569 Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Dave Airlie <airlied@redhat.com> | 03 November 2011, 17:53:22 UTC |
| 64912e9 | Alex Deucher | 03 November 2011, 15:21:39 UTC | drm/radeon/kms: set HPD polarity in hpd_init() Polarity needs to be set accordingly to connector status (connected or disconnected). Set it up in hpd_init() so first hotplug works reliably no matter what is the initial set of connector. hpd_init() also covers resume so HPD will work correctly after resume as well. Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: Jerome Glisse <j.glisse@gmail.com> Cc: stable@kernel.org Signed-off-by: Dave Airlie <airlied@redhat.com> | 03 November 2011, 17:53:18 UTC |
| a18cee1 | Alex Deucher | 01 November 2011, 18:20:30 UTC | drm/radeon/kms: add MSI module parameter Allow the user to override whether MSIs are enabled or not on supported ASICs. MSIs are disabled by default on IGP chips as they tend not to work. However certain IGP chips only seem to work with MSIs enabled. I suspect this is a chipset or bios issue, but I'm not sure what the proper fix is. This will at least make diagnosing and working around the problem much easier. See: https://bugs.freedesktop.org/show_bug.cgi?id=37679 Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@kernel.org Signed-off-by: Dave Airlie <airlied@redhat.com> | 03 November 2011, 17:53:14 UTC |
| 01e718e | Alex Deucher | 01 November 2011, 18:14:18 UTC | drm/radeon/kms: Add MSI quirk for Dell RS690 Some Dell laptops only seem to work with MSIs. This looks like a platform/bios bug. Fixes: https://bugs.freedesktop.org/show_bug.cgi?id=37679 Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@kernel.org Signed-off-by: Dave Airlie <airlied@redhat.com> | 03 November 2011, 17:53:09 UTC |
| b362105 | Alex Deucher | 25 October 2011, 19:11:08 UTC | drm/radeon/kms: Add MSI quirk for HP RS690 Some HP laptops only seem to work with MSIs. This looks like a platform/bios bug. Fixes: https://bugs.freedesktop.org/show_bug.cgi?id=37679 Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@kernel.org Signed-off-by: Dave Airlie <airlied@redhat.com> | 03 November 2011, 17:53:05 UTC |
| 8f6c25c | Alex Deucher | 25 October 2011, 18:58:49 UTC | drm/radeon/kms: split MSI check into a separate function This makes it easier to add quirks for certain systems. Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@kernel.org Signed-off-by: Dave Airlie <airlied@redhat.com> | 03 November 2011, 17:53:00 UTC |
| cd2b89e | Thomas Hellstrom | 25 October 2011, 21:35:53 UTC | vmwgfx: Reinstate the update_layout ioctl We need to redefine a connector as "connected" if it matches a window in the host preferred GUI layout. Otherwise "smart" window managers would turn on Xorg outputs that we don't want to be on. This reinstates the update_layout and adds the following information to the modesetting system. a) Connection status <-> Equivalent to real hardware connection status b) Preferred mode <-> Equivalent to real hardware reading EDID c) Host window position <-> Equivalent to a real hardware scanout address dynamic register. It should be noted that there is no assumption here about what should be displayed and where. Only how to access the host windows. This also bumps minor to signal availability of the new IOCTL. Based on code originally written by Jakob Bornecrantz Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> Signed-off-by: Dave Airlie <airlied@redhat.com> | 02 November 2011, 08:30:31 UTC |
| bc1c4dc | Alex Deucher | 30 October 2011, 20:54:27 UTC | drm/radeon/kms: always do extended edid probe Rather than having a quirk list just always check the EDID header when probing. This is the recommended behavior according to the display team. This avoids problems with improperly terminated i2c lines on some boards. This is also what the proprietary driver does. Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Dave Airlie <airlied@redhat.com> | 01 November 2011, 16:05:31 UTC |
| fab249e | Alex Deucher | 25 October 2011, 21:19:00 UTC | drm/radeon/kms: remove useless radeon_ddc_dump() The function didn't work with DP, eDP, or DP bridge connectors and thus confused users as it lead them to believe nothing was connected or the EDID was invalid when in fact is was, just on the aux bus rather an i2c. It should also speed up module loading as it avoids a bunch of extra DDC probing. Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Dave Airlie <airlied@redhat.com> | 01 November 2011, 16:05:27 UTC |
| a3b0829 | Alex Deucher | 28 October 2011, 22:46:37 UTC | drm/radeon/kms: make atombios_dig_transmitter_setup() version based Use the table version to determine which params to use. Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Dave Airlie <airlied@redhat.com> | 01 November 2011, 16:05:22 UTC |
| 58cdcb8 | Alex Deucher | 28 October 2011, 22:34:20 UTC | drm/radeon/kms: make atombios_dig_encoder_setup() version based set up the params based on the table version number. Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Dave Airlie <airlied@redhat.com> | 01 November 2011, 16:05:17 UTC |
| 24153dd | Alex Deucher | 28 October 2011, 22:18:50 UTC | drm/radeon/kms: make atombios_dvo_setup() version based Use table version numbers for param setup. Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Dave Airlie <airlied@redhat.com> | 01 November 2011, 16:05:12 UTC |
| 3f03ced | Alex Deucher | 30 October 2011, 21:20:22 UTC | drm/radeon/kms: move atom encoder setup to a new file Leave the common code in radeon_encoders.c and move the atom specific code to atombios_encoders.c. This matches legacy encoder setup and crtc setup. Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Dave Airlie <airlied@redhat.com> | 01 November 2011, 16:05:07 UTC |
| 16cdf04 | Alex Deucher | 28 October 2011, 14:30:02 UTC | drm/radeon/kms: allocate vram scratch page on 6xx+ The vram scratch was originally only used on some 7xx asics to work around a hw bug. Allocate the scratch page on all 6xx+ radeons and set the MC_VM_SYSTEM_APERTURE_DEFAULT_ADDR to point to it. We shouldn't ever hit it since we limit the system aperture to vram or vram and AGP, but better safe than sorry. Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Dave Airlie <airlied@redhat.com> | 01 November 2011, 16:05:02 UTC |
| 996d5c5 | Alex Deucher | 26 October 2011, 19:59:50 UTC | drm/radeon/kms: check for DP MST mode in a few more places (v2) DP MST is DP multi-stream support, part of DP 1.2. v2: switch to a helper macro as suggested by Michel. Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Dave Airlie <airlied@redhat.com> | 01 November 2011, 16:04:57 UTC |
| c41384f | Alex Deucher | 26 October 2011, 00:17:45 UTC | drm/radeon/kms/atom: rework encoder dpms The existing function was getting too big and complex. Break it down into a more manageable set of functions. Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Dave Airlie <airlied@redhat.com> | 01 November 2011, 16:04:53 UTC |
| fdca78c | Alex Deucher | 25 October 2011, 15:54:52 UTC | drm/radeon/kms: only require 2.7 Ghz DP clock for NUTMEG Use the regular logic for other bridge chips. Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Dave Airlie <airlied@redhat.com> | 01 November 2011, 16:04:44 UTC |
| 1d33e1f | Alex Deucher | 31 October 2011, 12:58:47 UTC | drm/radeon/kms: rework DP bridge checks Return the encoder id rather than a boolean. This is needed for differentiate between multiple DP bridge chips. Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Dave Airlie <airlied@redhat.com> | 01 November 2011, 16:04:39 UTC |
| 54bd520 | Ilija Hadzic | 26 October 2011, 19:43:58 UTC | drm/radeon/kms: use defined constants for crtc/hpd count instead of hard-coded value 6 radeon_driver_irq_preinstall_kms and radeon_driver_irq_uninstall_kms hard code the loop to 6 which happens to be the current maximum number of crtcs and hpd pins; if one day an ASIC with more crtcs (or hpd pins) comes out, this is a trouble waiting to happen. introduce constants for maximum CRTC count, maximum HPD pins count and maximum HDMI blocks count (per FIXME in radeon_irq structure) and correct the loops in radeon_driver_irq_preinstall_kms and radeon_driver_irq_uninstall_kms v2: take care of goofs pointed out by Alex Deucher Signed-off-by: Ilija Hadzic <ihadzic@research.bell-labs.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Dave Airlie <airlied@redhat.com> | 01 November 2011, 16:02:10 UTC |
| 77b1bad | Jerome Glisse | 26 October 2011, 15:41:22 UTC | drm/radeon: flush read cache for gtt with fence on r6xx and newer GPU V3 Cayman seems to be particularly sensitive to read cache returning old data after bind/unbind to GTT. Flush read cache for GTT range with each fences for all new hw. Should fix several rendering glitches. Like V2 flush whole address space V3 also flush shader read cache https://bugs.freedesktop.org/show_bug.cgi?id=40221 https://bugs.freedesktop.org/show_bug.cgi?id=38022 https://bugzilla.redhat.com/show_bug.cgi?id=738790 Signed-off-by: Jerome Glisse <jglisse@redhat.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Dave Airlie <airlied@redhat.com> | 01 November 2011, 16:02:07 UTC |
| 8ab250d | Jerome Glisse | 28 October 2011, 21:52:34 UTC | drm/radeon: set hpd polarity at init time so hotplug detect works Polarity needs to be set accordingly to connector status (connected or disconnected). Set it up at module init so first hotplug works reliably no matter what is the initial set of connector. Signed-off-by: Jerome Glisse <jglisse@redhat.com> cc: stable@kernel.org Signed-off-by: Dave Airlie <airlied@redhat.com> | 01 November 2011, 16:02:04 UTC |
| b4f15f8 | Alex Deucher | 25 October 2011, 15:34:51 UTC | drm/radeon/kms: cleanup atombios_adjust_pll() The logic was messy and hard to follow. Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Dave Airlie <airlied@redhat.com> | 01 November 2011, 16:02:01 UTC |
| 00dfb8d | Alex Deucher | 31 October 2011, 12:54:41 UTC | drm/radeon/kms: properly set panel mode for eDP This should make eDP more reliable. Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@kernel.org Signed-off-by: Dave Airlie <airlied@redhat.com> | 01 November 2011, 16:01:58 UTC |
| 06c9c23 | Alex Deucher | 24 October 2011, 16:57:57 UTC | drm/radeon/kms/cayman/blit: specify CP_COHER_CNTL2 with surface_sync CP_COHER_CNTL2 has to be programmed manually when submitting packets to the ring directly rather than programmed via an IB. Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Dave Airlie <airlied@redhat.com> | 01 November 2011, 16:01:55 UTC |
| 9bb7703 | Alex Deucher | 22 October 2011, 14:07:09 UTC | drm/radeon/kms: rework texture cache flush in r6xx+ blit code Move the TC flush before the texture setup to match mesa and the ddx. Also, move the TC flush into the texture setup function. Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Dave Airlie <airlied@redhat.com> | 01 November 2011, 16:01:52 UTC |
| 3407644 | Jerome Glisse | 24 October 2011, 22:16:34 UTC | drm/radeon: avoid bouncing connector status btw disconnected & unknown Since force handling rework of d0d0a225e6ad43314c9aa7ea081f76adc5098ad4 we could end up bouncing connector status btw disconnected and unknown. When connector status change a call to output_poll_changed happen which in turn ask again for detect but with force set. So set the load detect flags whenever we report the connector as connected or unknown this avoid bouncing btw disconnected and unknown. Signed-off-by: Jerome Glisse <jglisse@redhat.com> Reviewed-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com> | 01 November 2011, 16:01:49 UTC |
| 305151e | Thomas Hellstrom | 22 October 2011, 08:36:20 UTC | vmwgfx: Use "Virtual" connectors and encoders rather than "LVDS". Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> Reviewed-by: Jakob Bornecrantz <jakob@vmware.com> Signed-off-by: Dave Airlie <airlied@redhat.com> | 01 November 2011, 16:01:45 UTC |
| a7331e5 | Thomas Hellstrom | 22 October 2011, 08:36:19 UTC | drm: Introduce "Virtual" connectors and encoders This will allow us to attach various properties specific to virtual monitors in the future. Note that we don't export an EDID property for "Virtual" connectors. Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> Reviewed-by: Jakob Bornecrantz <jakob@vmware.com> Signed-off-by: Dave Airlie <airlied@redhat.com> | 01 November 2011, 16:01:42 UTC |
| 094803e | Linus Torvalds | 01 November 2011, 00:46:07 UTC | Merge branch 'akpm' (Andrew's incoming) Quoth Andrew: - Most of MM. Still waiting for the poweroc guys to get off their butts and review some threaded hugepages patches. - alpha - vfs bits - drivers/misc - a few core kerenl tweaks - printk() features - MAINTAINERS updates - backlight merge - leds merge - various lib/ updates - checkpatch updates * akpm: (127 commits) epoll: fix spurious lockdep warnings checkpatch: add a --strict check for utf-8 in commit logs kernel.h/checkpatch: mark strict_strto<foo> and simple_strto<foo> as obsolete llist-return-whether-list-is-empty-before-adding-in-llist_add-fix wireless: at76c50x: follow rename pack_hex_byte to hex_byte_pack fat: follow rename pack_hex_byte() to hex_byte_pack() security: follow rename pack_hex_byte() to hex_byte_pack() kgdb: follow rename pack_hex_byte() to hex_byte_pack() lib: rename pack_hex_byte() to hex_byte_pack() lib/string.c: fix strim() semantics for strings that have only blanks lib/idr.c: fix comment for ida_get_new_above() lib/percpu_counter.c: enclose hotplug only variables in hotplug ifdef lib/bitmap.c: quiet sparse noise about address space lib/spinlock_debug.c: print owner on spinlock lockup lib/kstrtox: common code between kstrto*() and simple_strto*() functions drivers/leds/leds-lp5521.c: check if reset is successful leds: turn the blink_timer off before starting to blink leds: save the delay values after a successful call to blink_set() drivers/leds/leds-gpio.c: use gpio_get_value_cansleep() when initializing drivers/leds/leds-lm3530.c: add __devexit_p where needed ... | 01 November 2011, 00:46:07 UTC |
| d8805e6 | Nelson Elhage | 01 November 2011, 00:13:14 UTC | epoll: fix spurious lockdep warnings epoll can acquire recursively acquire ep->mtx on multiple "struct eventpoll"s at once in the case where one epoll fd is monitoring another epoll fd. This is perfectly OK, since we're careful about the lock ordering, but it causes spurious lockdep warnings. Annotate the recursion using mutex_lock_nested, and add a comment explaining the nesting rules for good measure. Recent versions of systemd are triggering this, and it can also be demonstrated with the following trivial test program: --------------------8<-------------------- int main(void) { int e1, e2; struct epoll_event evt = { .events = EPOLLIN }; e1 = epoll_create1(0); e2 = epoll_create1(0); epoll_ctl(e1, EPOLL_CTL_ADD, e2, &evt); return 0; } --------------------8<-------------------- Reported-by: Paul Bolle <pebolle@tiscali.nl> Tested-by: Paul Bolle <pebolle@tiscali.nl> Signed-off-by: Nelson Elhage <nelhage@nelhage.com> Acked-by: Jason Baron <jbaron@redhat.com> Cc: Dave Jones <davej@redhat.com> Cc: Davide Libenzi <davidel@xmailserver.org> Cc: <stable@kernel.org> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 01 November 2011, 00:30:57 UTC |
| 15662b3 | Joe Perches | 01 November 2011, 00:13:12 UTC | checkpatch: add a --strict check for utf-8 in commit logs Some find using utf-8 in commit logs inappropriate. Some patch commit logs contain unintended utf-8 characters when doing things like copy/pasting compilation output. Look for the start of any commit log by skipping initial lines that look like email headers and "From: " lines. Stop looking for utf-8 at the first signature line. Signed-off-by: Joe Perches <joe@perches.com> Suggested-by: Andrew Morton <akpm@linux-foundation.org> Cc: Andy Whitcroft <apw@shadowen.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 01 November 2011, 00:30:57 UTC |
| 67d0a07 | Joe Perches | 01 November 2011, 00:13:10 UTC | kernel.h/checkpatch: mark strict_strto<foo> and simple_strto<foo> as obsolete Mark obsolete/deprecated strict_strto<foo> and simple_strto<foo> functions and macros as obsolete. Update checkpatch to warn about their use. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 01 November 2011, 00:30:57 UTC |
| fc23af3 | Andrew Morton | 01 November 2011, 00:13:08 UTC | llist-return-whether-list-is-empty-before-adding-in-llist_add-fix clarify comment Cc: Huang Ying <ying.huang@intel.com> Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Cc: Peter Zijlstra <peterz@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 01 November 2011, 00:30:57 UTC |
| 67220a9 | Andy Shevchenko | 01 November 2011, 00:13:00 UTC | wireless: at76c50x: follow rename pack_hex_byte to hex_byte_pack There is no functional change. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 01 November 2011, 00:30:57 UTC |
| 0a90e0f | Andy Shevchenko | 01 November 2011, 00:12:57 UTC | fat: follow rename pack_hex_byte() to hex_byte_pack() There is no functional change. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 01 November 2011, 00:30:57 UTC |
| 0247311 | Andy Shevchenko | 01 November 2011, 00:12:55 UTC | security: follow rename pack_hex_byte() to hex_byte_pack() There is no functional change. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: Mimi Zohar <zohar@us.ibm.com> Cc: James Morris <jmorris@namei.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 01 November 2011, 00:30:56 UTC |
| 50e1499 | Andy Shevchenko | 01 November 2011, 00:12:51 UTC | kgdb: follow rename pack_hex_byte() to hex_byte_pack() There is no functional change. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Jesper Nilsson <jesper.nilsson@axis.com> Cc: David Howells <dhowells@redhat.com> Cc: Koichi Yasutake <yasutake.koichi@jp.panasonic.com> Cc: Jason Wessel <jason.wessel@windriver.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 01 November 2011, 00:30:56 UTC |
| 55036ba | Andy Shevchenko | 01 November 2011, 00:12:41 UTC | lib: rename pack_hex_byte() to hex_byte_pack() As suggested by Andrew Morton in [1] there is better to have most significant part first in the function name. [1] https://lkml.org/lkml/2011/9/20/22 There is no functional change. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: Jesper Nilsson <jesper.nilsson@axis.com> Cc: David Howells <dhowells@redhat.com> Cc: Koichi Yasutake <yasutake.koichi@jp.panasonic.com> Cc: Jason Wessel <jason.wessel@windriver.com> Cc: Mimi Zohar <zohar@us.ibm.com> Cc: James Morris <jmorris@namei.org> Cc: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp> Cc: "John W. Linville" <linville@tuxdriver.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 01 November 2011, 00:30:56 UTC |
| 66f6958 | Michael Holzheu | 01 November 2011, 00:12:37 UTC | lib/string.c: fix strim() semantics for strings that have only blanks Commit 84c95c9acf0 ("string: on strstrip(), first remove leading spaces before running over str") improved the performance of the strim() function. Unfortunately this changed the semantics of strim() and broke my code. Before the patch it was possible to use strim() without using the return value for removing trailing spaces from strings that had either only blanks or only trailing blanks. Now this does not work any longer for strings that *only* have blanks. Before patch: " " -> "" (empty string) After patch: " " -> " " (no change) I think we should remove your patch to restore the old behavior. The description (lib/string.c): * Note that the first trailing whitespace is replaced with a %NUL-terminator => The first trailing whitespace of a string that only has whitespace characters is the first whitespace The patch restores the old strim() semantics. Signed-off-by: Michael Holzheu <holzheu@linux.vnet.ibm.com> Cc: Andre Goddard Rosa <andre.goddard@gmail.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 01 November 2011, 00:30:56 UTC |
| e3816c5 | Wang Sheng-Hui | 01 November 2011, 00:12:36 UTC | lib/idr.c: fix comment for ida_get_new_above() Signed-off-by: Wang Sheng-Hui <shhuiw@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 01 November 2011, 00:30:56 UTC |
| 3a8495c | Glauber Costa | 01 November 2011, 00:12:34 UTC | lib/percpu_counter.c: enclose hotplug only variables in hotplug ifdef These variables are only used when CONFIG_HOTPLUG_CPU is enabled, they are ifdef'ed everywhere else. So don't define them when CONFIG_HOTPLUG_CPU is not enabled. Signed-off-by: Glauber Costa <glommer@parallels.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 01 November 2011, 00:30:56 UTC |
| b9c321f | H Hartley Sweeten | 01 November 2011, 00:12:32 UTC | lib/bitmap.c: quiet sparse noise about address space __bitmap_parse() and __bitmap_parselist() both take a pointer to a kernel buffer as a parameter and then cast it to a pointer to user buffer for use in cases when the parameter is_user indicates that the buffer is actually located in user space. This casting, and the casts in the callers, results in sparse noise like the following: warning: incorrect type in initializer (different address spaces) expected char const [noderef] <asn:1>*ubuf got char const *buf warning: cast removes address space of expression Since these casts are intentional, use __force to quiet the noise. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Len Brown <len.brown@intel.com> Cc: Huang Ying <ying.huang@intel.com> Cc: Andy Shevchenko <andy.shevchenko@gmail.com> Cc: Andi Kleen <ak@linux.intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 01 November 2011, 00:30:56 UTC |
| 4e101b0 | Akinobu Mita | 01 November 2011, 00:12:29 UTC | lib/spinlock_debug.c: print owner on spinlock lockup When SPIN_BUG_ON is triggered, the lock owner information is reported. But it is omitted when spinlock lockup is detected. This information is useful especially on the architectures which don't implement trigger_all_cpu_backtrace() that is called just after detecting lockup. So report it and also avoid message format duplication. Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Cc: Ingo Molnar <mingo@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 01 November 2011, 00:30:56 UTC |
| 1dff46d | Alexey Dobriyan | 01 November 2011, 00:12:28 UTC | lib/kstrtox: common code between kstrto*() and simple_strto*() functions Currently termination logic (\0 or \n\0) is hardcoded in _kstrtoull(), avoid that for code reuse between kstrto*() and simple_strtoull(). Essentially, make them different only in termination logic. simple_strtoull() (and scanf(), BTW) ignores integer overflow, that's a bug we currently don't have guts to fix, making KSTRTOX_OVERFLOW hack necessary. Almost forgot: patch shrinks code size by about ~80 bytes on x86_64. Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 01 November 2011, 00:30:56 UTC |
| b3c49c0 | Srinidhi KASAGAR | 01 November 2011, 00:12:24 UTC | drivers/leds/leds-lp5521.c: check if reset is successful Make sure that the reset is successful by issuing a dummy read to R channel current register and check its default value. On some platforms, without this dummy read, any further access to {R/G/B}_EXEC will not have any impact. [akpm@linux-foundation.org: fix up code comment] Signed-off-by: srinidhi kasagar <srinidhi.kasagar@stericsson.com> Tested-by: Naga Radhesh <naga.radheshy@stericsson.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Cc: Richard Purdie <richard.purdie@linuxfoundation.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 01 November 2011, 00:30:55 UTC |
| 488bc35 | Antonio Ospite | 01 November 2011, 00:12:22 UTC | leds: turn the blink_timer off before starting to blink Depending on the implementation of the hardware blinking function in blink_set(), the led can support hardware blinking for some values of delay_on and delay_off and fall-back to software blinking for some other values. Turning off the blink_timer unconditionally before starting to blink make sure that a sequence like: OFF hardware blinking software blinking hardware blinking does not leave the software blinking timer active. Signed-off-by: Antonio Ospite <ospite@studenti.unina.it> Reviewed-by: Johannes Berg <johannes@sipsolutions.net> Cc: Richard Purdie <rpurdie@rpsys.net> Cc: <stable@kernel.org> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 01 November 2011, 00:30:55 UTC |
| 6123b0e | Antonio Ospite | 01 November 2011, 00:12:19 UTC | leds: save the delay values after a successful call to blink_set() When calling the hardware blinking function implemented by blink_set(), the delay_on and delay_off values are not preserved across calls. Fix that and make the "timer" trigger work as expected when hardware blinking is available. BEFORE the fix: $ cd /sys/class/leds/someled $ echo timer > trigger $ cat delay_on delay_off 0 0 $ echo 100 > delay_on $ cat delay_on delay_off 0 0 $ echo 100 > delay_off $ cat delay_on delay_off 0 0 AFTER the fix: $ cd /sys/class/leds/someled $ echo timer > trigger $ cat delay_on delay_off 0 0 $ echo 100 > delay_on $ cat delay_on delay_off 100 0 $ echo 100 > delay_off $ cat delay_on delay_off 100 100 Signed-off-by: Antonio Ospite <ospite@studenti.unina.it> Reviewed-by: Johannes Berg <johannes@sipsolutions.net> Cc: Richard Purdie <rpurdie@rpsys.net> Cc: <stable@kernel.org> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 01 November 2011, 00:30:55 UTC |
| dabc69c | David Daney | 01 November 2011, 00:12:17 UTC | drivers/leds/leds-gpio.c: use gpio_get_value_cansleep() when initializing I get the following warning: ------------[ cut here ]------------ WARNING: at drivers/gpio/gpiolib.c:1559 __gpio_get_value+0x90/0x98() Modules linked in: Call Trace: [<ffffffff81440950>] dump_stack+0x8/0x34 [<ffffffff81141478>] warn_slowpath_common+0x78/0xa0 [<ffffffff812f0958>] __gpio_get_value+0x90/0x98 [<ffffffff81434f04>] create_gpio_led+0xdc/0x194 [<ffffffff8143524c>] gpio_led_probe+0x290/0x36c [<ffffffff8130e8b0>] driver_probe_device+0x78/0x1b0 [<ffffffff8130eaa8>] __driver_attach+0xc0/0xc8 [<ffffffff8130d7ac>] bus_for_each_dev+0x64/0xb0 [<ffffffff8130e130>] bus_add_driver+0x1c8/0x2a8 [<ffffffff8130f100>] driver_register+0x90/0x180 [<ffffffff81100438>] do_one_initcall+0x38/0x160 ---[ end trace ee38723fbefcd65c ]--- My GPIOs are on an I2C port expander, so we must use the *_cansleep() variant of the GPIO functions. This is was not being done in create_gpio_led(). We can change gpio_get_value() to gpio_get_value_cansleep() because it is only called from the platform_driver probe function, which is a context where we can sleep. Only tested on my gpio_cansleep() system, but it seems safe for all systems. Signed-off-by: David Daney <david.daney@cavium.com> Cc: Richard Purdie <rpurdie@rpsys.net> Acked-by: Trent Piepho <tpiepho@gmail.com> Cc: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 01 November 2011, 00:30:55 UTC |
| 93f5398 | Axel Lin | 01 November 2011, 00:12:15 UTC | drivers/leds/leds-lm3530.c: add __devexit_p where needed According to the comments in include/linux/init.h: "Pointers to __devexit functions must use __devexit_p(function_name), the wrapper will insert either the function_name or NULL, depending on the config options." We have __devexit annotation for lm3530_remove(), so add __devexit_p to the `struct i2c_driver'. Signed-off-by: Axel Lin <axel.lin@gmail.com> Cc: Shreshtha Kumar SAHU <shreshthakumar.sahu@stericsson.com> Cc: Richard Purdie <rpurdie@rpsys.net> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 01 November 2011, 00:30:55 UTC |
| fa0ea0e | Axel Lin | 01 November 2011, 00:12:12 UTC | drivers/leds/leds-lp5521.c: avoid writing uninitialized value to LP5521_REG_OP_MODE register If lp5521_read fails, engine_state variable is not initialized. If lp5521_read fails, we should return error. This patch fixes below warning. CC drivers/leds/leds-lp5521.o drivers/leds/leds-lp5521.c: In function 'lp5521_set_engine_mode': drivers/leds/leds-lp5521.c:168: warning: 'engine_state' may be used uninitialized in this function [akpm@linux-foundation.org: remove unneeded "ret |="] Signed-off-by: Axel Lin <axel.lin@gmail.com> Cc: Samu Onkalo <samu.p.onkalo@nokia.com> Cc: Richard Purdie <rpurdie@rpsys.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 01 November 2011, 00:30:55 UTC |
| 2b67c95 | Magnus Damm | 01 November 2011, 00:12:09 UTC | drivers/leds/leds-renesas-tpu.c: move Renesas TPU LED driver platform data Use the platform_data include directory for the TPU LED driver, as suggested by Paul Mundt. Signed-off-by: Magnus Damm <damm@opensource.se> Cc: Paul Mundt <lethal@linux-sh.org> Cc: Richard Purdie <rpurdie@rpsys.net> Cc: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 01 November 2011, 00:30:55 UTC |
| 02c3294 | Magnus Damm | 01 November 2011, 00:12:06 UTC | drivers/leds/leds-renesas-tpu.c: update driver to use workqueue Use a workqueue in the Renesas TPU LED driver to allow the Runtime PM code to sleep. Signed-off-by: Magnus Damm <damm@opensource.se> Cc: Paul Mundt <lethal@linux-sh.org> Cc: Richard Purdie <rpurdie@rpsys.net> Cc: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 01 November 2011, 00:30:55 UTC |
| 3edc580 | Wolfram Sang | 01 November 2011, 00:12:03 UTC | drivers/leds/leds-lm3530.c: remove obsolete cleanup for clientdata A few new i2c-drivers came into the kernel which clear the clientdata-pointer on exit or error. This is obsolete meanwhile, the core will do it. Signed-off-by: Wolfram Sang <w.sang@pengutronix.de> Cc: Richard Purdie <rpurdie@rpsys.net> Acked-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 01 November 2011, 00:30:55 UTC |
| cba4c2a | Masakazu Mokuno | 01 November 2011, 00:11:59 UTC | drivers/leds/led-triggers.c: fix memory leak The memory for struct led_trigger should be kfreed in the led_trigger_register() error path. Also this function should return NULL on error. Signed-off-by: Masakazu Mokuno <mokuno@sm.sony.co.jp> Cc: Richard Purdie <rpurdie@rpsys.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 01 November 2011, 00:30:55 UTC |
| f59b6f9 | Magnus Damm | 01 November 2011, 00:11:55 UTC | leds: Renesas TPU LED driver Add V2 of the LED driver for a single timer channel for the TPU hardware block commonly found in Renesas SoCs. The driver has been written with optimal Power Management in mind, so to save power the LED is driven as a regular GPIO pin in case of maximum brightness and power off which allows the TPU hardware to be idle and which in turn allows the clocks to be stopped and the power domain to be turned off transparently. Any other brightness level requires use of the TPU hardware in PWM mode. TPU hardware device clocks and power are managed through Runtime PM. System suspend and resume is known to be working - during suspend the LED is set to off by the generic LED code. The TPU hardware timer is equipeed with a 16-bit counter together with an up-to-divide-by-64 prescaler which makes the hardware suitable for brightness control. Hardware blink is unsupported. The LED PWM waveform has been verified with a Fluke 123 Scope meter on a sh7372 Mackerel board. Tested with experimental sh7372 A3SP power domain patches. Platform device bind/unbind tested ok. V2 has been tested on the DS2 LED of the sh73a0-based AG5EVM. [axel.lin@gmail.com: include linux/module.h] Signed-off-by: Magnus Damm <damm@opensource.se> Cc: Paul Mundt <lethal@linux-sh.org> Cc: Richard Purdie <rpurdie@rpsys.net> Cc: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 01 November 2011, 00:30:54 UTC |
| 1bff3a2 | Axel Lin | 01 November 2011, 00:11:52 UTC | backlight: rename corgibl_limit_intensity() to genericbl_limit_intensity() The rename of corgibl_limit_intensity is missed in commit d00ba726 ("backlight: Rename the corgi backlight driver to generic"). Let's fix it now. Signed-off-by: Axel Lin <axel.lin@gmail.com> Cc: Richard Purdie <rpurdie@rpsys.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 01 November 2011, 00:30:54 UTC |
| 4f5a66b | Fabio Estevam | 01 November 2011, 00:11:50 UTC | drivers/video/backlight/l4f00242t03.c: use gpio_request_one() to simplify error handling Using gpio_request_one can make the error handling simpler. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Cc: Richard Purdie <rpurdie@rpsys.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 01 November 2011, 00:30:54 UTC |
| 0556dc3 | Mark Brown | 01 November 2011, 00:11:48 UTC | backlight: fix broken regulator API usage in l4f00242t03 The regulator support in the l4f00242t03 is very non-idiomatic. Rather than requesting the regulators based on the device name and the supply names used by the device the driver requires boards to pass system specific supply names around through platform data. The driver also conditionally requests the regulators based on this platform data, adding unneeded conditional code to the driver. Fix this by removing the platform data and converting to the standard idiom, also updating all in tree users of the driver. As no datasheet appears to be available for the LCD I'm guessing the names for the supplies based on the existing users and I've no ability to do anything more than compile test. The use of regulator_set_voltage() in the driver is also problematic, since fixed voltages are required the expectation would be that the voltages would be fixed in the constraints set by the machines rather than manually configured by the driver, but is less problematic. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Tested-by: Fabio Estevam <fabio.estevam@freescale.com> Cc: Richard Purdie <rpurdie@rpsys.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 01 November 2011, 00:30:54 UTC |
| 2967b0a | Wolfram Sang | 01 November 2011, 00:11:44 UTC | video/backlight: remove obsolete cleanup for clientdata A few new i2c-drivers came into the kernel which clear the clientdata-pointer on exit or error. This is obsolete meanwhile, the core will do it. Signed-off-by: Wolfram Sang <w.sang@pengutronix.de> Cc: Richard Purdie <rpurdie@rpsys.net> Cc: Paul Mundt <lethal@linux-sh.org> Acked-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 01 November 2011, 00:30:54 UTC |
| 1330b0d | Jiri Kosina | 01 November 2011, 00:11:41 UTC | MAINTAINERS: add ASLR maintainer Since achieving the full ASLR by merging the PIE randomization in commit cc503c1b43 ("x86: PIE executable randomization"), I have been dealing with most (if not all) of the bugreports reported against userspace address space randomization, so it might be a good idea to provide a decent contact point in MAINTAINERS. Signed-off-by: Jiri Kosina <jkosina@suse.cz> Cc: Josh Boyer <jwboyer@redhat.com> Cc: Nicolas Pitre <nicolas.pitre@linaro.org> Cc: Ingo Molnar <mingo@elte.hu> Cc: Russell King <rmk@arm.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 01 November 2011, 00:30:54 UTC |
| 03535ab | Linas Vepstas | 01 November 2011, 00:11:38 UTC | MAINTAINERS: Linas has moved While ego surfing, I noticed an email address problem. Signed-off-by: Linas Vepstas <linasvepstas@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 01 November 2011, 00:30:54 UTC |
| c41d5a1 | Ike Panhc | 01 November 2011, 00:11:37 UTC | MAINTAINERS: add new entry for ideapad-laptop Signed-off-by: Ike Panhc <ike.pan@canonical.com> Cc: Matthew Garrett <mjg@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 01 November 2011, 00:30:54 UTC |
| b9075fa | Joe Perches | 01 November 2011, 00:11:33 UTC | treewide: use __printf not __attribute__((format(printf,...))) Standardize the style for compiler based printf format verification. Standardized the location of __printf too. Done via script and a little typing. $ grep -rPl --include=*.[ch] -w "__attribute__" * | \ grep -vP "^(tools|scripts|include/linux/compiler-gcc.h)" | \ xargs perl -n -i -e 'local $/; while (<>) { s/\b__attribute__\s*\(\s*\(\s*format\s*\(\s*printf\s*,\s*(.+)\s*,\s*(.+)\s*\)\s*\)\s*\)/__printf($1, $2)/g ; print; }' [akpm@linux-foundation.org: revert arch bits] Signed-off-by: Joe Perches <joe@perches.com> Cc: "Kirill A. Shutemov" <kirill@shutemov.name> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 01 November 2011, 00:30:54 UTC |
| ae29bc9 | William Douglas | 01 November 2011, 00:11:31 UTC | printk: remove bounds checking for log_prefix Currently log_prefix is testing that the first character of the log level and facility is less than '0' and greater than '9' (which is always false). Since the code being updated works because strtoul bombs out (endp isn't updated) and 0 is returned anyway just remove the check and don't change the behavior of the function. Signed-off-by: William Douglas <william.douglas@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 01 November 2011, 00:30:53 UTC |
| 48e4189 | William Douglas | 01 November 2011, 00:11:29 UTC | printk: fix bounds checking for log_prefix Currently log_prefix is testing that the first character of the log level and facility is less than '0' and greater than '9' (which is always false). It should be testing to see if the character less than '0' or greater than '9' instead. This patch makes that change. The code being changed worked because strtoul bombs out (endp isn't updated) and 0 is returned anyway. Signed-off-by: William Douglas <william.douglas@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 01 November 2011, 00:30:53 UTC |
| 134620f | Yanmin Zhang | 01 November 2011, 00:11:27 UTC | printk: add console_suspend module parameter We are enabling some power features on medfield. To test suspend-2-RAM conveniently, we need turn on/off console_suspend_enabled frequently. Add a module parameter, so users could change it by: /sys/module/printk/parameters/console_suspend Signed-off-by: Yanmin Zhang <yanmin_zhang@linux.intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 01 November 2011, 00:30:53 UTC |
| 0eca6b7 | Yanmin Zhang | 01 November 2011, 00:11:25 UTC | printk: add module parameter ignore_loglevel to control ignore_loglevel We are enabling some power features on medfield. To test suspend-2-RAM conveniently, we need turn on/off ignore_loglevel frequently without rebooting. Add a module parameter, so users can change it by: /sys/module/printk/parameters/ignore_loglevel Signed-off-by: Yanmin Zhang <yanmin.zhang@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 01 November 2011, 00:30:53 UTC |
| 73efc03 | Dan Ballard | 01 November 2011, 00:11:20 UTC | kernel/sysctl.c: add cap_last_cap to /proc/sys/kernel Userspace needs to know the highest valid capability of the running kernel, which right now cannot reliably be retrieved from the header files only. The fact that this value cannot be determined properly right now creates various problems for libraries compiled on newer header files which are run on older kernels. They assume capabilities are available which actually aren't. libcap-ng is one example. And we ran into the same problem with systemd too. Now the capability is exported in /proc/sys/kernel/cap_last_cap. [akpm@linux-foundation.org: make cap_last_cap const, per Ulrich] Signed-off-by: Dan Ballard <dan@mindstab.net> Cc: Randy Dunlap <rdunlap@xenotime.net> Cc: Ingo Molnar <mingo@elte.hu> Cc: Lennart Poettering <lennart@poettering.net> Cc: Kay Sievers <kay.sievers@vrfy.org> Cc: Ulrich Drepper <drepper@akkadia.org> Cc: James Morris <jmorris@namei.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 01 November 2011, 00:30:53 UTC |
| 4ff8195 | Vasily Averin | 01 November 2011, 00:11:18 UTC | watchdog: move watchdog_*_all_cpus under CONFIG_SYSCTL Fix compilation warnings for CONFIG_SYSCTL=n: fixed compilation warnings in case of disabled CONFIG_SYSCTL kernel/watchdog.c:483:13: warning: `watchdog_enable_all_cpus' defined but not used kernel/watchdog.c:500:13: warning: `watchdog_disable_all_cpus' defined but not used these functions are static and are used only in sysctl handler, so move them inside #ifdef CONFIG_SYSCTL too Signed-off-by: Vasily Averin <vvs@sw.ru> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 01 November 2011, 00:30:53 UTC |
| f445027 | Jeremy Fitzhardinge | 01 November 2011, 00:11:15 UTC | stop_machine: make stop_machine safe and efficient to call early Make stop_machine() safe to call early in boot, before SMP has been set up, by simply calling the callback function directly if there's only one CPU online. [ Fixes from AKPM: - add comment - local_irq_flags, not save_flags - also call hard_irq_disable() for systems which need it Tejun suggested using an explicit flag rather than just looking at the online cpu count. ] Cc: Tejun Heo <tj@kernel.org> Acked-by: Rusty Russell <rusty@rustcorp.com.au> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: H. Peter Anvin <hpa@linux.intel.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Steven Rostedt <rostedt@goodmis.org> Acked-by: Tejun Heo <htejun@gmail.com> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 01 November 2011, 00:30:53 UTC |
| aaaa287 | Peter Korsgaard | 01 November 2011, 00:11:12 UTC | drivers/misc/ad525x_dpot-i2c.c: add i2c support for AD5161 Commit 6c536e4ce8e ("ad525x_dpot: add support for SPI parts") added support for the AD5161 through SPI, but the device supports both I2C and SPI (depending on the DIS pin), so add it to -i2c as well. Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk> Acked-by: Mike Frysinger <vapier@gentoo.org> Acked-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 01 November 2011, 00:30:53 UTC |
| e58a0f8 | Jonghwan Choi | 01 November 2011, 00:11:09 UTC | driver/misc/fsa9480.c fix potential null-pointer dereference Signed-off-by: Jonghwan Choi <jhbird.choi@samsung.com> Cc: Donggeun Kim <dg77.kim@samsung.com> Cc: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 01 November 2011, 00:30:53 UTC |
| ec400c9 | Mark Brown | 01 November 2011, 00:11:07 UTC | lis3lv02d: make regulator API usage unconditional The regulator API contains a range of features for stubbing itself out when not in use and for transparently restricting the actual effect of regulator API calls where they can't be supported on a particular system so that drivers don't need to individually implement this. Simplify the driver slightly by making use of this idiom. The only in tree user is ecovec24 which does not use the regulator API. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: Éric Piel <eric.piel@tremplin-utc.net> Cc: Ilkka Koskinen <ilkka.koskinen@nokia.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 01 November 2011, 00:30:52 UTC |
| 895c156 | Éric Piel | 01 November 2011, 00:11:05 UTC | lis3: remove the references to the global variable in core driver [ilkka.koskinen@nokia.com: fix arg to lis3->read()] Signed-off-by: Ilkka Koskinen <ilkka.koskinen@nokia.com> Signed-off-by: Éric Piel <eric.piel@tremplin-utc.net> Cc: Matthew Garrett <mjg@redhat.com> Cc: Witold Pilat <witold.pilat@gmail.com> Cc: Lyall Pearce <lyall.pearce@hp.com> Cc: Malte Starostik <m-starostik@versanet.de> Cc: Thadeu Lima de Souza Cascardo <cascardo@holoscopio.com> Cc: Christian Lamparter <chunkeey@googlemail.com> Subject: lis3-remove-the-references-to-the-global-variable-in-core-driver-fix Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 01 November 2011, 00:30:52 UTC |
| e1e5687 | Éric Piel | 01 November 2011, 00:11:02 UTC | lis3: change exported function to use passed parameter Change exported functions to use the device given as parameter instead of the global one. Signed-off-by: Ilkka Koskinen <ilkka.koskinen@nokia.com> Signed-off-by: Éric Piel <eric.piel@tremplin-utc.net> Cc: Matthew Garrett <mjg@redhat.com> Cc: Witold Pilat <witold.pilat@gmail.com> Cc: Lyall Pearce <lyall.pearce@hp.com> Cc: Malte Starostik <m-starostik@versanet.de> Cc: Thadeu Lima de Souza Cascardo <cascardo@holoscopio.com> Cc: Christian Lamparter <chunkeey@googlemail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 01 November 2011, 00:30:52 UTC |
| d7f81d4 | Éric Piel | 01 November 2011, 00:10:58 UTC | lis3: use consistent naming of variables Signed-off-by: Ilkka Koskinen <ilkka.koskinen@nokia.com> Signed-off-by: Éric Piel <eric.piel@tremplin-utc.net> Cc: Matthew Garrett <mjg@redhat.com> Cc: Witold Pilat <witold.pilat@gmail.com> Cc: Lyall Pearce <lyall.pearce@hp.com> Cc: Malte Starostik <m-starostik@versanet.de> Cc: Thadeu Lima de Souza Cascardo <cascardo@holoscopio.com> Cc: Christian Lamparter <chunkeey@googlemail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 01 November 2011, 00:30:52 UTC |
| 0021586 | Éric Piel | 01 November 2011, 00:10:54 UTC | lis3: free regulators if probe() fails Signed-off-by: Ilkka Koskinen <ilkka.koskinen@nokia.com> Signed-off-by: Éric Piel <eric.piel@tremplin-utc.net> Cc: Matthew Garrett <mjg@redhat.com> Cc: Witold Pilat <witold.pilat@gmail.com> Cc: Lyall Pearce <lyall.pearce@hp.com> Cc: Malte Starostik <m-starostik@versanet.de> Cc: Thadeu Lima de Souza Cascardo <cascardo@holoscopio.com> Cc: Christian Lamparter <chunkeey@googlemail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 01 November 2011, 00:30:52 UTC |
| d0b6a97 | Éric Piel | 01 November 2011, 00:10:50 UTC | hp_accel: add HP ProBook 655x Add axis correction for HP ProBook 6555b. Signed-off-by: Malte Starostik <m-starostik@versanet.de> Signed-off-by: Éric Piel <eric.piel@tremplin-utc.net> Cc: Matthew Garrett <mjg@redhat.com> Cc: Witold Pilat <witold.pilat@gmail.com> Cc: Lyall Pearce <lyall.pearce@hp.com> Cc: Ilkka Koskinen <ilkka.koskinen@nokia.com> Cc: Thadeu Lima de Souza Cascardo <cascardo@holoscopio.com> Cc: Christian Lamparter <chunkeey@googlemail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 01 November 2011, 00:30:52 UTC |
| cdeaf62 | Éric Piel | 01 November 2011, 00:10:46 UTC | lis3: add support for HP EliteBook 8540w Add axis correction for HP EliteBook 8540w. Reported-by: Lyall Pearce <lyall.pearce@hp.com> Signed-off-by: Éric Piel <eric.piel@tremplin-utc.net> Cc: Matthew Garrett <mjg@redhat.com> Cc: Witold Pilat <witold.pilat@gmail.com> Cc: Malte Starostik <m-starostik@versanet.de> Cc: Ilkka Koskinen <ilkka.koskinen@nokia.com> Cc: Thadeu Lima de Souza Cascardo <cascardo@holoscopio.com> Cc: Christian Lamparter <chunkeey@googlemail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 01 November 2011, 00:30:52 UTC |
| a17b81b | Éric Piel | 01 November 2011, 00:10:43 UTC | lis3: add support for HP EliteBook 2730p Add axis correction for HP EliteBook 2730p. Tested-by: Witold Pilat <witold.pilat@gmail.com> Signed-off-by: Éric Piel <eric.piel@tremplin-utc.net> Cc: Matthew Garrett <mjg@redhat.com> Cc: Lyall Pearce <lyall.pearce@hp.com> Cc: Malte Starostik <m-starostik@versanet.de> Cc: Ilkka Koskinen <ilkka.koskinen@nokia.com> Cc: Thadeu Lima de Souza Cascardo <cascardo@holoscopio.com> Cc: Christian Lamparter <chunkeey@googlemail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 01 November 2011, 00:30:52 UTC |
| bd35665 | Éric Piel | 01 November 2011, 00:10:41 UTC | lis3: update maintainer information In the move of the lis3 driver, the hp_accel.c file got dropped from the MAINTAINER file. Make it explicit again that this file is tied to lis3 again. Signed-off-by: Éric Piel <eric.piel@tremplin-utc.net> Cc: Matthew Garrett <mjg@redhat.com> Cc: Witold Pilat <witold.pilat@gmail.com> Cc: Lyall Pearce <lyall.pearce@hp.com> Cc: Malte Starostik <m-starostik@versanet.de> Cc: Ilkka Koskinen <ilkka.koskinen@nokia.com> Cc: Thadeu Lima de Souza Cascardo <cascardo@holoscopio.com> Cc: Christian Lamparter <chunkeey@googlemail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 01 November 2011, 00:30:52 UTC |
| 1510dd5 | Éric Piel | 01 November 2011, 00:10:31 UTC | lis3lv02d: avoid divide by zero due to unchecked After an "unexpected" reboot, I found this Oops in my logs: divide error: 0000 [#1] PREEMPT SMP=20 CPU 0=20 Modules linked in: lis3lv02d hp_wmi input_polldev [...] Pid: 390, comm: modprobe Tainted: G C 2.6.39-rc7-wl+=20 RIP: 0010:[<ffffffffa014b427>] [<ffffffffa014b427>] lis3lv02d_poweron+0x4e/0x94 [lis3lv02d] RSP: 0018:ffff8801d6407cf8 EFLAGS: 00010246 RAX: 0000000000000bb8 RBX: ffffffffa014e000 RCX: 0000000000000000 RDX: 0000000000000000 RSI: ffffea00066e4708 RDI: ffff8801df002700 RBP: ffff8801d6407d18 R08: ffffea00066c5a30 R09: ffffffff812498c9 R10: ffff8801d7bfcea0 R11: ffff8801d7bfce10 R12: 0000000000000bb8 R13: 00000000ffffffda R14: ffffffffa0154120 R15: ffffffffa0154030 =46S: 00007fc0705db700(0000) GS:ffff8801dfa00000(0000) knlGS:0 CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b CR2: 00007f33549174f0 CR3: 00000001d65c9000 CR4: 00000000000406f0 Process modprobe (pid: 390, threadinfo ffff8801d6406000, task ffff8801d6b40= 000) Stack: ffffffffa0154120 62ffffffa0154030 ffffffffa014e000 00000000ffffffea ffff8801d6407d58 ffffffffa014bcc1 0000000000000000 0000000000000048 ffff8801d8bae800 00000000ffffffea 00000000ffffffda ffffffffa0154120 Call Trace: [<ffffffffa014bcc1>] lis3lv02d_init_device+0x1ce/0x496 [lis3lv02d] [<ffffffffa01522ff>] lis3lv02d_add+0x10f/0x17c [hp_accel] [<ffffffff81233e11>] acpi_device_probe+0x49/0x117 [...] Code: 3a 75 06 80 4d ef 50 eb 04 80 4d ef 40 0f b6 55 ef be 21 00 00 00 48 89 df ff 53 18 44 8b 63 6c e8 3e fc ff ff 89 c1 44 89 e0 99 <f7> f9 89 c7 e8 93 82 ef e0 48 83 7b 30 00 74 2d 45 31 e4 80 7b=20 RIP [<ffffffffa014b427>] lis3lv02d_poweron+0x4e/0x94 [lis3lv02d] RSP <ffff8801d6407cf8> >From my POV, it looks like the hardware is not working as expected and returns a bogus data rate. The driver doesn't check the result and directly uses it as some sort of divisor in some places: msleep(lis3->pwron_delay / lis3lv02d_get_odr()); Under this circumstances, this could very well cause the "divide by zero" exception from above. For now, I fixed it the easiest and most obvious way: Check if the result is sane and if it isn't use a sane default instead. I went for "100" in the latter case, simply because /sys/devices/platform/lis3lv02d/rate returns it on a successful boot. Signed-off-by: Christian Lamparter <chunkeey@googlemail.com> Signed-off-by: Éric Piel <eric.piel@tremplin-utc.net> Cc: Matthew Garrett <mjg@redhat.com> Cc: Witold Pilat <witold.pilat@gmail.com> Cc: Lyall Pearce <lyall.pearce@hp.com> Cc: Malte Starostik <m-starostik@versanet.de> Cc: Ilkka Koskinen <ilkka.koskinen@nokia.com> Cc: Thadeu Lima de Souza Cascardo <cascardo@holoscopio.com> Cc: Christian Lamparter <chunkeey@googlemail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 01 November 2011, 00:30:51 UTC |
| 6580704 | Jonathan Cameron | 01 November 2011, 00:10:27 UTC | drivers/hwmon/hwmon.c: convert idr to ida and use ida_simple_get() A straightforward looking use of idr for a device id. Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Tejun Heo <tj@kernel.org> Cc: Guenter Roeck <guenter.roeck@ericsson.com> Cc: James Bottomley <James.Bottomley@HansenPartnership.com> Acked-by: Darrick J. Wong <djwong@us.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 01 November 2011, 00:30:51 UTC |
| 4ca5f46 | Jonathan Cameron | 01 November 2011, 00:10:09 UTC | hwmon: convert idr to ida and use ida_simple interface hwmon was using an idr with a NULL pointer, so convert to an ida which then allows use of Rusty's ida_simple_get. Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Tejun Heo <tj@kernel.org> Acked-by: Guenter Roeck <guenter.roeck@ericsson.com> Cc: James Bottomley <James.Bottomley@HansenPartnership.com> Cc: David Airlie <airlied@linux.ie> Cc: Thomas Hellstrom <thellstrom@vmware.com> Cc: Evgeniy Polyakov <zbr@ioremap.net> Cc: Darrick J. Wong <djwong@us.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 01 November 2011, 00:30:51 UTC |
| c51eaac | Jiaju Zhang | 01 November 2011, 00:10:07 UTC | lib/Kconfig.debug: fix help message for DEFAULT_HUNG_TASK_TIMEOUT Added missing _secs in the help message of config DEFAULT_HUNG_TASK_TIMEOUT. Signed-off-by: Jiaju Zhang <jjzhang@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 01 November 2011, 00:30:51 UTC |
| d70ef97 | Pavel Emelyanov | 01 November 2011, 00:10:04 UTC | fs/pipe.c: add ->statfs callback for pipefs Currently a statfs on a pipe's /proc/<pid>/fd/ link returns -ENOSYS. Wire pipfs up so that the statfs succeeds. This is required by checkpoint-restart in the userspace to make it possible to distinguish pipes from fifos. When we dump information about task's open files we use the /proc/pid/fd directoy's symlinks and the fact that opening any of them gives us exactly the same dentry->inode pair as the original process has. Now if a task we're dumping has opened pipe and fifo we need to detect this and act accordingly. Knowing that an fd with type S_ISFIFO resides on a pipefs is the most precise way. Signed-off-by: Pavel Emelyanov <xemul@parallels.com> Reviewed-by: Tejun Heo <tj@kernel.org> Acked-by: Serge Hallyn <serge.hallyn@canonical.com> Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org> Cc: Al Viro <viro@ZenIV.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 01 November 2011, 00:30:51 UTC |
| a8aff21 | Michael Cree | 01 November 2011, 00:10:01 UTC | alpha: wire up sendmmsg syscall Signed-off-by: Michael Cree <mcree@orcon.net.nz> Reviewed-by: Matt Turner <mattst88@gmail.com> Cc: Richard Henderson <rth@twiddle.net> Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 01 November 2011, 00:30:51 UTC |
| 0a8c384 | Michael Cree | 01 November 2011, 00:09:49 UTC | alpha: wire up accept4 syscall Somehow wiring up the accept4 syscall on Alpha was missed long ago. This commit rectifies that oversight. Signed-off-by: Michael Cree <mcree@orcon.net.nz> Reviewed-by: Matt Turner <mattst88@gmail.com> Cc: Richard Henderson <rth@twiddle.net> Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 01 November 2011, 00:30:51 UTC |
| a1cb2c6 | Dimitri Sivanich | 01 November 2011, 00:09:46 UTC | mm/vmstat.c: cache align vm_stat Avoid false sharing of the vm_stat array. This was found to adversely affect tmpfs I/O performance. Tests run on a 640 cpu UV system. With 120 threads doing parallel writes, each to different tmpfs mounts: No patch: ~300 MB/sec With vm_stat alignment: ~430 MB/sec Signed-off-by: Dimitri Sivanich <sivanich@sgi.com> Acked-by: Christoph Lameter <cl@gentwo.org> Acked-by: Mel Gorman <mel@csn.ul.ie> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 01 November 2011, 00:30:51 UTC |
| 3d470fc | Hugh Dickins | 01 November 2011, 00:09:43 UTC | mm: munlock use mapcount to avoid terrible overhead A process spent 30 minutes exiting, just munlocking the pages of a large anonymous area that had been alternately mprotected into page-sized vmas: for every single page there's an anon_vma walk through all the other little vmas to find the right one. A general fix to that would be a lot more complicated (use prio_tree on anon_vma?), but there's one very simple thing we can do to speed up the common case: if a page to be munlocked is mapped only once, then it is our vma that it is mapped into, and there's no need whatever to walk through all the others. Okay, there is a very remote race in munlock_vma_pages_range(), if between its follow_page() and lock_page(), another process were to munlock the same page, then page reclaim remove it from our vma, then another process mlock it again. We would find it with page_mapcount 1, yet it's still mlocked in another process. But never mind, that's much less likely than the down_read_trylock() failure which munlocking already tolerates (in try_to_unmap_one()): in due course page reclaim will discover and move the page to unevictable instead. [akpm@linux-foundation.org: add comment] Signed-off-by: Hugh Dickins <hughd@google.com> Cc: Michel Lespinasse <walken@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 01 November 2011, 00:30:51 UTC |
| 35d8c7a | Hillf Danton | 01 November 2011, 00:09:40 UTC | mm/huge_memory: fix typo when updating mmu cache There are three cases of update_mmu_cache() in the file, and the case in function collapse_huge_page() has a typo, namely the last parameter used, which is corrected based on the other two cases. Due to the define of update_mmu_cache by X86, the only arch that implements THP currently, the change here has no really crystal point, but one or two minutes of efforts could be saved for those archs that are likely to support THP in future. Signed-off-by: Hillf Danton <dhillf@gmail.com> Cc: Johannes Weiner <jweiner@redhat.com> Reviewed-by: Andrea Arcangeli <aarcange@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 01 November 2011, 00:30:51 UTC |
| 0089e48 | Hillf Danton | 01 November 2011, 00:09:38 UTC | mm/huge_memory: fix copying user highpage The THP copy-on-write handler falls back to regular-sized pages for a huge page replacement upon allocation failure or if THP has been individually disabled in the target VMA. The loop responsible for copying page-sized chunks accidentally uses multiples of PAGE_SHIFT instead of PAGE_SIZE as the virtual address arg for copy_user_highpage(). Signed-off-by: Hillf Danton <dhillf@gmail.com> Acked-by: Johannes Weiner <jweiner@redhat.com> Reviewed-by: Andrea Arcangeli <aarcange@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 01 November 2011, 00:30:50 UTC |
| df9d698 | Christoph Lameter | 01 November 2011, 00:09:35 UTC | mm: do not drain pagevecs for mlockall(MCL_FUTURE) MCL_FUTURE does not move pages between lru list and draining the LRU per cpu pagevecs is a nasty activity. Avoid doing it unecessarily. Signed-off-by: Christoph Lameter <cl@gentwo.org> Cc: David Rientjes <rientjes@google.com> Reviewed-by: Minchan Kim <minchan.kim@gmail.com> Acked-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Mel Gorman <mel@csn.ul.ie> Acked-by: Johannes Weiner <jweiner@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 01 November 2011, 00:30:50 UTC |
| e0c2327 | Mel Gorman | 01 November 2011, 00:09:33 UTC | vmscan: abort reclaim/compaction if compaction can proceed If compaction can proceed, shrink_zones() stops doing any work but its callers still call shrink_slab() which raises the priority and potentially sleeps. This is unnecessary and wasteful so this patch aborts direct reclaim/compaction entirely if compaction can proceed. Signed-off-by: Mel Gorman <mgorman@suse.de> Acked-by: Rik van Riel <riel@redhat.com> Reviewed-by: Minchan Kim <minchan.kim@gmail.com> Acked-by: Johannes Weiner <jweiner@redhat.com> Cc: Josh Boyer <jwboyer@redhat.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 01 November 2011, 00:30:50 UTC |
