https://github.com/torvalds/linux
Revision 69ad4ef868c1fc7609daa235dfa46d28ba7a3ba3 authored by Matt Lupfer on 08 March 2022, 15:27:02 UTC, committed by Martin K. Petersen on 15 March 2022, 03:45:19 UTC
A page fault was encountered in mpt3sas on a LUN reset error path: [ 145.763216] mpt3sas_cm1: Task abort tm failed: handle(0x0002),timeout(30) tr_method(0x0) smid(3) msix_index(0) [ 145.778932] scsi 1:0:0:0: task abort: FAILED scmd(0x0000000024ba29a2) [ 145.817307] scsi 1:0:0:0: attempting device reset! scmd(0x0000000024ba29a2) [ 145.827253] scsi 1:0:0:0: [sg1] tag#2 CDB: Receive Diagnostic 1c 01 01 ff fc 00 [ 145.837617] scsi target1:0:0: handle(0x0002), sas_address(0x500605b0000272b9), phy(0) [ 145.848598] scsi target1:0:0: enclosure logical id(0x500605b0000272b8), slot(0) [ 149.858378] mpt3sas_cm1: Poll ReplyDescriptor queues for completion of smid(0), task_type(0x05), handle(0x0002) [ 149.875202] BUG: unable to handle page fault for address: 00000007fffc445d [ 149.885617] #PF: supervisor read access in kernel mode [ 149.894346] #PF: error_code(0x0000) - not-present page [ 149.903123] PGD 0 P4D 0 [ 149.909387] Oops: 0000 [#1] PREEMPT SMP NOPTI [ 149.917417] CPU: 24 PID: 3512 Comm: scsi_eh_1 Kdump: loaded Tainted: G S O 5.10.89-altav-1 #1 [ 149.934327] Hardware name: DDN 200NVX2 /200NVX2-MB , BIOS ATHG2.2.02.01 09/10/2021 [ 149.951871] RIP: 0010:_base_process_reply_queue+0x4b/0x900 [mpt3sas] [ 149.961889] Code: 0f 84 22 02 00 00 8d 48 01 49 89 fd 48 8d 57 38 f0 0f b1 4f 38 0f 85 d8 01 00 00 49 8b 45 10 45 31 e4 41 8b 55 0c 48 8d 1c d0 <0f> b6 03 83 e0 0f 3c 0f 0f 85 a2 00 00 00 e9 e6 01 00 00 0f b7 ee [ 149.991952] RSP: 0018:ffffc9000f1ebcb8 EFLAGS: 00010246 [ 150.000937] RAX: 0000000000000055 RBX: 00000007fffc445d RCX: 000000002548f071 [ 150.011841] RDX: 00000000ffff8881 RSI: 0000000000000001 RDI: ffff888125ed50d8 [ 150.022670] RBP: 0000000000000000 R08: 0000000000000000 R09: c0000000ffff7fff [ 150.033445] R10: ffffc9000f1ebb68 R11: ffffc9000f1ebb60 R12: 0000000000000000 [ 150.044204] R13: ffff888125ed50d8 R14: 0000000000000080 R15: 34cdc00034cdea80 [ 150.054963] FS: 0000000000000000(0000) GS:ffff88dfaf200000(0000) knlGS:0000000000000000 [ 150.066715] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 150.076078] CR2: 00000007fffc445d CR3: 000000012448a006 CR4: 0000000000770ee0 [ 150.086887] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 150.097670] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 150.108323] PKRU: 55555554 [ 150.114690] Call Trace: [ 150.120497] ? printk+0x48/0x4a [ 150.127049] mpt3sas_scsih_issue_tm.cold.114+0x2e/0x2b3 [mpt3sas] [ 150.136453] mpt3sas_scsih_issue_locked_tm+0x86/0xb0 [mpt3sas] [ 150.145759] scsih_dev_reset+0xea/0x300 [mpt3sas] [ 150.153891] scsi_eh_ready_devs+0x541/0x9e0 [scsi_mod] [ 150.162206] ? __scsi_host_match+0x20/0x20 [scsi_mod] [ 150.170406] ? scsi_try_target_reset+0x90/0x90 [scsi_mod] [ 150.178925] ? blk_mq_tagset_busy_iter+0x45/0x60 [ 150.186638] ? scsi_try_target_reset+0x90/0x90 [scsi_mod] [ 150.195087] scsi_error_handler+0x3a5/0x4a0 [scsi_mod] [ 150.203206] ? __schedule+0x1e9/0x610 [ 150.209783] ? scsi_eh_get_sense+0x210/0x210 [scsi_mod] [ 150.217924] kthread+0x12e/0x150 [ 150.224041] ? kthread_worker_fn+0x130/0x130 [ 150.231206] ret_from_fork+0x1f/0x30 This is caused by mpt3sas_base_sync_reply_irqs() using an invalid reply_q pointer outside of the list_for_each_entry() loop. At the end of the full list traversal the pointer is invalid. Move the _base_process_reply_queue() call inside of the loop. Link: https://lore.kernel.org/r/d625deae-a958-0ace-2ba3-0888dd0a415b@ddn.com Fixes: 711a923c14d9 ("scsi: mpt3sas: Postprocessing of target and LUN reset") Cc: stable@vger.kernel.org Acked-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com> Signed-off-by: Matt Lupfer <mlupfer@ddn.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
1 parent 10af115
Tip revision: 69ad4ef868c1fc7609daa235dfa46d28ba7a3ba3 authored by Matt Lupfer on 08 March 2022, 15:27:02 UTC
scsi: mpt3sas: Page fault in reply q processing
scsi: mpt3sas: Page fault in reply q processing
Tip revision: 69ad4ef
task_work.c
// SPDX-License-Identifier: GPL-2.0
#include <linux/spinlock.h>
#include <linux/task_work.h>
#include <linux/tracehook.h>
static struct callback_head work_exited; /* all we need is ->next == NULL */
/**
* task_work_add - ask the @task to execute @work->func()
* @task: the task which should run the callback
* @work: the callback to run
* @notify: how to notify the targeted task
*
* Queue @work for task_work_run() below and notify the @task if @notify
* is @TWA_RESUME or @TWA_SIGNAL. @TWA_SIGNAL works like signals, in that the
* it will interrupt the targeted task and run the task_work. @TWA_RESUME
* work is run only when the task exits the kernel and returns to user mode,
* or before entering guest mode. Fails if the @task is exiting/exited and thus
* it can't process this @work. Otherwise @work->func() will be called when the
* @task goes through one of the aforementioned transitions, or exits.
*
* If the targeted task is exiting, then an error is returned and the work item
* is not queued. It's up to the caller to arrange for an alternative mechanism
* in that case.
*
* Note: there is no ordering guarantee on works queued here. The task_work
* list is LIFO.
*
* RETURNS:
* 0 if succeeds or -ESRCH.
*/
int task_work_add(struct task_struct *task, struct callback_head *work,
enum task_work_notify_mode notify)
{
struct callback_head *head;
/* record the work call stack in order to print it in KASAN reports */
kasan_record_aux_stack(work);
do {
head = READ_ONCE(task->task_works);
if (unlikely(head == &work_exited))
return -ESRCH;
work->next = head;
} while (cmpxchg(&task->task_works, head, work) != head);
switch (notify) {
case TWA_NONE:
break;
case TWA_RESUME:
set_notify_resume(task);
break;
case TWA_SIGNAL:
set_notify_signal(task);
break;
default:
WARN_ON_ONCE(1);
break;
}
return 0;
}
/**
* task_work_cancel_match - cancel a pending work added by task_work_add()
* @task: the task which should execute the work
* @match: match function to call
*
* RETURNS:
* The found work or NULL if not found.
*/
struct callback_head *
task_work_cancel_match(struct task_struct *task,
bool (*match)(struct callback_head *, void *data),
void *data)
{
struct callback_head **pprev = &task->task_works;
struct callback_head *work;
unsigned long flags;
if (likely(!task->task_works))
return NULL;
/*
* If cmpxchg() fails we continue without updating pprev.
* Either we raced with task_work_add() which added the
* new entry before this work, we will find it again. Or
* we raced with task_work_run(), *pprev == NULL/exited.
*/
raw_spin_lock_irqsave(&task->pi_lock, flags);
while ((work = READ_ONCE(*pprev))) {
if (!match(work, data))
pprev = &work->next;
else if (cmpxchg(pprev, work, work->next) == work)
break;
}
raw_spin_unlock_irqrestore(&task->pi_lock, flags);
return work;
}
static bool task_work_func_match(struct callback_head *cb, void *data)
{
return cb->func == data;
}
/**
* task_work_cancel - cancel a pending work added by task_work_add()
* @task: the task which should execute the work
* @func: identifies the work to remove
*
* Find the last queued pending work with ->func == @func and remove
* it from queue.
*
* RETURNS:
* The found work or NULL if not found.
*/
struct callback_head *
task_work_cancel(struct task_struct *task, task_work_func_t func)
{
return task_work_cancel_match(task, task_work_func_match, func);
}
/**
* task_work_run - execute the works added by task_work_add()
*
* Flush the pending works. Should be used by the core kernel code.
* Called before the task returns to the user-mode or stops, or when
* it exits. In the latter case task_work_add() can no longer add the
* new work after task_work_run() returns.
*/
void task_work_run(void)
{
struct task_struct *task = current;
struct callback_head *work, *head, *next;
for (;;) {
/*
* work->func() can do task_work_add(), do not set
* work_exited unless the list is empty.
*/
do {
head = NULL;
work = READ_ONCE(task->task_works);
if (!work) {
if (task->flags & PF_EXITING)
head = &work_exited;
else
break;
}
} while (cmpxchg(&task->task_works, work, head) != work);
if (!work)
break;
/*
* Synchronize with task_work_cancel(). It can not remove
* the first entry == work, cmpxchg(task_works) must fail.
* But it can remove another entry from the ->next list.
*/
raw_spin_lock_irq(&task->pi_lock);
raw_spin_unlock_irq(&task->pi_lock);
do {
next = work->next;
work->func(work);
work = next;
cond_resched();
} while (work);
}
}
![swh spinner](/static/img/swh-spinner.gif)
Computing file changes ...