Revision 6a4c24ec52128c1f57b7d2d24cf4dd13fc23f474 authored by Andrew Morton on 01 February 2007, 07:48:13 UTC, committed by Linus Torvalds on 02 February 2007, 00:22:41 UTC
Remove these recently-added warnings. They don't tell us anythng very interesting and Kumar says "On an embedded PPC reference system I see this message 6 times when I've got no cards in the PCI slots." Acked-by: Kumar Gala <galak@kernel.crashing.org> Acked-by: Greg KH <greg@kroah.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
1 parent cb7468e
cli-sti-removal.txt
#### cli()/sti() removal guide, started by Ingo Molnar <mingo@redhat.com>
as of 2.5.28, five popular macros have been removed on SMP, and
are being phased out on UP:
cli(), sti(), save_flags(flags), save_flags_cli(flags), restore_flags(flags)
until now it was possible to protect driver code against interrupt
handlers via a cli(), but from now on other, more lightweight methods
have to be used for synchronization, such as spinlocks or semaphores.
for example, driver code that used to do something like:
struct driver_data;
irq_handler (...)
{
....
driver_data.finish = 1;
driver_data.new_work = 0;
....
}
...
ioctl_func (...)
{
...
cli();
...
driver_data.finish = 0;
driver_data.new_work = 2;
...
sti();
...
}
was SMP-correct because the cli() function ensured that no
interrupt handler (amongst them the above irq_handler()) function
would execute while the cli()-ed section is executing.
but from now on a more direct method of locking has to be used:
spinlock_t driver_lock = SPIN_LOCK_UNLOCKED;
struct driver_data;
irq_handler (...)
{
unsigned long flags;
....
spin_lock_irqsave(&driver_lock, flags);
....
driver_data.finish = 1;
driver_data.new_work = 0;
....
spin_unlock_irqrestore(&driver_lock, flags);
....
}
...
ioctl_func (...)
{
...
spin_lock_irq(&driver_lock);
...
driver_data.finish = 0;
driver_data.new_work = 2;
...
spin_unlock_irq(&driver_lock);
...
}
the above code has a number of advantages:
- the locking relation is easier to understand - actual lock usage
pinpoints the critical sections. cli() usage is too opaque.
Easier to understand means it's easier to debug.
- it's faster, because spinlocks are faster to acquire than the
potentially heavily-used IRQ lock. Furthermore, your driver does
not have to wait eg. for a big heavy SCSI interrupt to finish,
because the driver_lock spinlock is only used by your driver.
cli() on the other hand was used by many drivers, and extended
the critical section to the whole IRQ handler function - creating
serious lock contention.
to make the transition easier, we've still kept the cli(), sti(),
save_flags(), save_flags_cli() and restore_flags() macros defined
on UP systems - but their usage will be phased out until 2.6 is
released.
drivers that want to disable local interrupts (interrupts on the
current CPU), can use the following five macros:
local_irq_disable(), local_irq_enable(), local_save_flags(flags),
local_irq_save(flags), local_irq_restore(flags)
but beware, their meaning and semantics are much simpler, far from
that of the old cli(), sti(), save_flags(flags) and restore_flags(flags)
SMP meaning:
local_irq_disable() => turn local IRQs off
local_irq_enable() => turn local IRQs on
local_save_flags(flags) => save the current IRQ state into flags. The
state can be on or off. (on some
architectures there's even more bits in it.)
local_irq_save(flags) => save the current IRQ state into flags and
disable interrupts.
local_irq_restore(flags) => restore the IRQ state from flags.
(local_irq_save can save both irqs on and irqs off state, and
local_irq_restore can restore into both irqs on and irqs off state.)
another related change is that synchronize_irq() now takes a parameter:
synchronize_irq(irq). This change too has the purpose of making SMP
synchronization more lightweight - this way you can wait for your own
interrupt handler to finish, no need to wait for other IRQ sources.
why were these changes done? The main reason was the architectural burden
of maintaining the cli()/sti() interface - it became a real problem. The
new interrupt system is much more streamlined, easier to understand, debug,
and it's also a bit faster - the same happened to it that will happen to
cli()/sti() using drivers once they convert to spinlocks :-)
![swh spinner](/static/img/swh-spinner.gif)
Computing file changes ...