sort by:
Revision Author Date Message Commit Date
6a6aa2b Merge branch 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: x86/amd-iommu: Fix rounding-bug in __unmap_single x86/amd-iommu: Work around S3 BIOS bug x86/amd-iommu: Set iommu configuration flags in enable-loop x86, setup: Fix earlyprintk=serial,0x3f8,115200 x86, setup: Fix earlyprintk=serial,ttyS0,115200 27 September 2010, 19:22:21 UTC
f061934 Merge branch 'perf-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'perf-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: perf, x86: Catch spurious interrupts after disabling counters tracing/x86: Don't use mcount in kvmclock.c tracing/x86: Don't use mcount in pvclock.c 27 September 2010, 19:21:48 UTC
60bdb72 mn10300: check __get_user/__put_user results... Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 27 September 2010, 19:19:53 UTC
8e87354 mn10300: get rid of set_fs(USER_DS) in sigframe setup It really has no business being there; short of a serious kernel bug we should already have USER_DS at that point. It shouldn't have been done on x86 either... Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 27 September 2010, 19:19:53 UTC
c05628b mn10300: ->restart_block.fn needs to be reset on sigreturn Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 27 September 2010, 19:19:53 UTC
00cbf60 mn10300: prevent double syscall restarts set ->orig_d0 to -1, same as what sigreturn does Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 27 September 2010, 19:19:53 UTC
e46924d mn10300: avoid SIGSEGV delivery loop force_sigsegv() is there for purpose... Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 27 September 2010, 19:19:53 UTC
18e6bfa alpha: __get_user/__put_user results need to be checked... Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 27 September 2010, 19:19:53 UTC
c52c2dd alpha: switch osf_sigprocmask() to use of sigprocmask() get rid of a useless wrapper, while we are at it Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 27 September 2010, 19:19:53 UTC
32163f4 alpha: fix usp value in multithreaded coredumps rdusp() gives us the right value only for the current thread... Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 25 September 2010, 21:38:13 UTC
77edffb alpha: fix hae_cache race in RESTORE_ALL We want interrupts disabled on all paths leading to RESTORE_ALL; otherwise, we are risking an IRQ coming between the updates of alpha_mv->hae_cache and *alpha_mv->hae_register and set_hae() within the IRQ getting badly confused. RESTORE_ALL used to play with disabling IRQ itself, but that got removed back in 2002, without making sure we had them disabled on all paths. It's cheaper to make sure we have them disabled than to revert to original variant... Remove the detritus left from that commit back in 2002; we used to need a reload of $0 and $1 since swpipl would change those, but doing that had become pointless when we stopped doing swpipl in there... Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 25 September 2010, 21:38:13 UTC
56162ba Merge branch 'for-linus' of git://git.kernel.dk/linux-2.6-block * 'for-linus' of git://git.kernel.dk/linux-2.6-block: block: prevent merges of discard and write requests 25 September 2010, 16:51:54 UTC
e7553b1 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6: ALSA: sound/pci/rme9652: prevent reading uninitialized stack memory ALSA: hda - Fix auto-parse of SPDIF input of Realtek codecs ASoC: Fix multi-componentism ASoC: Fix soc-cache buffer overflow bug ALSA: oxygen: fix analog capture on Claro halo cards ALSA: hda - Add Dell Latitude E6400 model quirk ASoC: fix clkdev API usage in sh/migor.c 25 September 2010, 16:51:31 UTC
5ec1055 Avoid pgoff overflow in remap_file_pages Thomas Pollet noticed that the remap_file_pages() system call in fremap.c has a potential overflow in the first part of the if statement below, which could cause it to process bogus input parameters. Specifically the pgoff + size parameters could be wrap thereby preventing the system call from failing when it should. Reported-by: Thomas Pollet <thomas.pollet@gmail.com> Signed-off-by: Larry Woodman <lwoodman@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 25 September 2010, 16:34:58 UTC
3b23cd2 Merge branch 'fix/hda' into for-linus 25 September 2010, 15:57:53 UTC
b614e38 Merge branch 'fix/asoc' into for-linus 25 September 2010, 15:57:49 UTC
e68d3b3 ALSA: sound/pci/rme9652: prevent reading uninitialized stack memory The SNDRV_HDSP_IOCTL_GET_CONFIG_INFO and SNDRV_HDSP_IOCTL_GET_CONFIG_INFO ioctls in hdspm.c and hdsp.c allow unprivileged users to read uninitialized kernel stack memory, because several fields of the hdsp{m}_config_info structs declared on the stack are not altered or zeroed before being copied back to the user. This patch takes care of it. Signed-off-by: Dan Rosenberg <dan.j.rosenberg@gmail.com> Cc: <stable@kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de> 25 September 2010, 15:46:22 UTC
f281fb5 block: prevent merges of discard and write requests Add logic to prevent two I/O requests being merged if only one of them is a discard. Ditto secure discard. Without this fix, it is possible for write requests to transform into discard requests. For example: Submit bio 1 to discard 8 sectors from sector n Submit bio 2 to write 8 sectors from sector n + 16 Submit bio 3 to write 8 sectors from sector n + 8 Bio 1 becomes request 1. Bio 2 becomes request 2. Bio 3 is merged with request 2, and then subsequently request 2 is merged with request 1 resulting in just one I/O request which discards all 24 sectors. Signed-off-by: Adrian Hunter <adrian.hunter@nokia.com> (Moved the checks above the position checks /Jens) Signed-off-by: Jens Axboe <jaxboe@fusionio.com> 25 September 2010, 10:42:55 UTC
8ae0925 Merge branch 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/staging * 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/staging: x86/hwmon: pkgtemp has no dependency on PCI MAINTAINERS: Update hwmon entry x86/hwmon: register alternate sibling upon CPU removal x86/hwmon: fix initialization of pkgtemp x86/hwmon: fix initialization of coretemp x86/hwmon: don't leak device attribute file from pkgtemp_probe() and pkgtemp_remove() x86/hwmon: avoid deadlock on CPU removal in pkgtemp x86/hwmon: fix module init for hotplug-but-no-device-found case hwmon: (lis3) Fix Oops with NULL platform data 25 September 2010, 02:09:20 UTC
fd194e6 Merge branch 'stable' of git://git.kernel.org/pub/scm/linux/kernel/git/cmetcalf/linux-tile * 'stable' of git://git.kernel.org/pub/scm/linux/kernel/git/cmetcalf/linux-tile: arch/tile: remove dead code from intvec_32.S 25 September 2010, 02:08:39 UTC
ea44e06 arch/tile: remove dead code from intvec_32.S This "bpt_code" instruction was killed off in our development line a while ago (the actual definition of bpt_code that is used is in kernel/traps.c) but I didn't push it for 2.6.36 because it seemed harmless and I didn't want to try to push more than absolutely necessary. However, we recently fixed a bug in our gcc that had been causing "-gdwarf2" not to be passed to the assembler, and passing this flag causes an erroneous assembler failure in the presence of code in a data section, sometimes. While we'd like to track down the bug in the assembler, we'd also like to make sure 2.6.36 builds with the current toolchain, so I'm removing this dead code as well. Signed-off-by: Chris Metcalf <cmetcalf@tilera.com> 24 September 2010, 21:19:20 UTC
e92b05d fremap: get rid of broken 'end' variable Thomas Pollet points out that the 'end' variable is broken. It was computed based on start/size before they were page-aligned, and as such doesn't actually match any of the other actions we take. The overflow test on end was also redundant, since we had already tested it with the properly aligned version. So just get rid of it entirely. The one remaining use for that broken variable can just use 'start+size' like all the other cases already did. Reported-by: Thomas Pollet <thomas.pollet@gmail.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 24 September 2010, 21:13:57 UTC
d1f3e68 Merge branch 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jlbec/ocfs2 * 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jlbec/ocfs2: o2dlm: force free mles during dlm exit ocfs2: Sync inode flags with ext2. ocfs2: Move 'wanted' into parens of ocfs2_resmap_resv_bits. ocfs2: Use cpu_to_le16 for e_leaf_clusters in ocfs2_bg_discontig_add_extent. ocfs2: update ctime when changing the file's permission by setfacl ocfs2/net: fix uninitialized ret in o2net_send_message_vec() Ocfs2: Handle empty list in lockres_seq_start() for dlmdebug.c Ocfs2: Re-access the journal after ocfs2_insert_extent() in dxdir codes. ocfs2: Fix lockdep warning in reflink. ocfs2/lockdep: Move ip_xattr_sem out of ocfs2_xattr_get_nolock. 24 September 2010, 21:08:15 UTC
cb9cae0 Merge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6 * git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6: USB: update Kconfig help text for CONFIG_USB_SUSPEND usb: musb: gadget: restart request on clearing endpoint halt usb: musb: host: Issue a memory barrier before starting DMA usb: musb: gadget: fix dma length in txstate usb: musb: gadget: complete request only if data is transfered over usb: musb: gadget: fix DMA length for OUT transfer usb: musb: gadget: enable autoclear for OUT transfer in both DMA 0 and DMA 1 usb: musb: gadget: fix bulk IN infinit hangs in double buffer case usb: musb: gadget: fix kernel panic if using out ep with FIFO_TXRX style USB: fix bug in initialization of interface minor numbers 24 September 2010, 20:55:29 UTC
06706b5 Merge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging-2.6 * git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging-2.6: Staging: ti-st: remove st_get_plat_device 24 September 2010, 20:55:12 UTC
cbff1e9 Merge branch 'drm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6 * 'drm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6: vgaarb: trivial fix drm: radeon cleanup fixes... drm: fix trivial coding errors drm: ttm sparse fixes. drm/nouveau: fix panels using straps-based mode detection drm/ttm: Clear the ghost cpu_writers flag on ttm_buffer_object_transfer. drm/radeon: don't allow device to be opened if powered down 24 September 2010, 20:55:01 UTC
acdc0d5 m32r: fix breakage from "m32r: use generic ptrace_resume code" Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 24 September 2010, 20:54:19 UTC
bb9c861 m32r: hole in shifting pc back It's a userland pointer; worse, an untrustable one since ptrace has just provided a chance to modify it. X-Roothole-Covering-Cabal: TINRCC Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 24 September 2010, 20:54:19 UTC
a05c4e1 m32r: don't block signals if sigframe setup has failed Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 24 September 2010, 20:54:19 UTC
a748102 make m32r handle multiple pending signals Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 24 September 2010, 20:54:19 UTC
a7f8388 m32r: fix rt_sigsuspend() do_signal() should know about saved_mask for it to work... Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 24 September 2010, 20:54:19 UTC
0eae779 x86/hwmon: pkgtemp has no dependency on PCI Other than coretemp, from which this code was apparently derived, there is no PCI specific code in this driver. Signed-off-by: Jan Beulich <jbeulich@novell.com> Cc: Fenghua Yu <fenghua.yu@intel.com> Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com> 24 September 2010, 18:44:19 UTC
885374e MAINTAINERS: Update hwmon entry Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com> 24 September 2010, 18:44:19 UTC
e40cc4b x86/hwmon: register alternate sibling upon CPU removal Just like pkgtemp registers another core of the same package when one gets removed, coretemp should register another hyperthread (if available) in that situation. As pointed out in the patch fixing the respective code in pkgtemp, the list protectng mutex must be dropped before calling coretemp_device_add(), and due to the restructured loop (including an explicit return) the "safe" variant of the list iterator isn't needed anymore. Signed-off-by: Jan Beulich <jbeulich@novell.com> Cc: Rudolf Marek <r.marek@assembler.cz> Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com> 24 September 2010, 18:44:19 UTC
f6aeccd x86/hwmon: fix initialization of pkgtemp Feature availability should also be checked in the hotplug code path. Signed-off-by: Jan Beulich <jbeulich@novell.com> Cc: Fenghua Yu <fenghua.yu@intel.com> Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com> 24 September 2010, 18:44:19 UTC
a465905 x86/hwmon: fix initialization of coretemp Using cpuid_eax() to determine feature availability on other than the current CPU is invalid. And feature availability should also be checked in the hotplug code path. Signed-off-by: Jan Beulich <jbeulich@novell.com> Cc: Rudolf Marek <r.marek@assembler.cz> Cc: Fenghua Yu <fenghua.yu@intel.com> Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com> 24 September 2010, 18:44:19 UTC
d172132 x86/hwmon: don't leak device attribute file from pkgtemp_probe() and pkgtemp_remove() While apparently inherited from coretemp source, this particular error handling cleanup and exit path wasn't copied properly (or perhaps got discarded intermediately and not re-added properly later). Signed-off-by: Jan Beulich <jbeulich@novell.com> Cc: Fenghua Yu <fenghua.yu@intel.com> Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com> (added device file removal in pkgtemp_remove) 24 September 2010, 18:44:19 UTC
d9bca43 x86/hwmon: avoid deadlock on CPU removal in pkgtemp pkgtemp_device_remove(), holding the list protecting mutex, calls pkgtemp_device_add(), which itself wants to acquire the same mutex. Holding the mutex over the entire loop body in pkgtemp_device_remove() isn't really necessary, as long as the loop gets exited after processing the matched CPU. Once exiting the loop after removing an eventual match, there's no need for using the "safe" list iterator anymore. Signed-off-by: Jan Beulich <jbeulich@novell.com> Cc: Fenghua Yu <fenghua.yu@intel.com> Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com> 24 September 2010, 18:44:18 UTC
89a3fd3 x86/hwmon: fix module init for hotplug-but-no-device-found case In commit 0dca94baeab4a1a514841b0a4c8e3a51dfb4d5ae the call to platform_driver_unregister() was made conditional upon !HOTPLUG_CPU, but the return value from coretemp_init() was left to indicate an error. This isn't correct, as the negative return value indicates to the module loader that initialization failed, which isn't intended here and results in dangling pointers. Signed-off-by: Jan Beulich <jbeulich@novell.com> Cc: Chen Gong <gong.chen@linux.intel.com> Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com> 24 September 2010, 18:44:18 UTC
f7c77a3 hwmon: (lis3) Fix Oops with NULL platform data The recent addition of threaded irq handler causes a NULL dereference when used with hp_accel driver, which has NULL pdata. Acked-by: Samu Onkalo <samu.p.onkalo@nokia.com> Cc: <stable@kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com> 24 September 2010, 18:44:18 UTC
2dab394 USB: update Kconfig help text for CONFIG_USB_SUSPEND This patch (as1429) updates the Kconfig help text for CONFIG_USB_SUSPEND. The power/level file is now deprecated; we should tell people to use power/control instead. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> 24 September 2010, 18:05:01 UTC
a666e3e usb: musb: gadget: restart request on clearing endpoint halt Commit 46034dca515bc4ddca0399ae58106d1f5f0d809f (USB: musb_gadget_ep0: stop abusing musb_gadget_set_halt()) forgot to restart a queued request after clearing the endpoint halt feature. This results in a couple of USB resets while enumerating the file-backed storage gadget due to CSW packet not being sent for the MODE SENSE(10) command. Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Cc: stable@kernel.org Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> 24 September 2010, 18:05:01 UTC
4c64733 usb: musb: host: Issue a memory barrier before starting DMA This patch fixes the issue which was observed while transfering a large file ( > 20MB) over USB (OMAP MUSB controller acts as USB host) to an attached USB thumb drive. It was found that CDB field of CBW packet was set to 0x0. This was due to missing a barrier before DMA engine starts transfer. This buffer is allocated using dma_alloc_coherent which gives non-cacheble but bufferable memory and hence needed a write memory barrier to flush the write buffer. More info on this thread is here: http://www.spinics.net/lists/linux-omap/msg33987.html Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Signed-off-by: Maulik Mankad <x0082077@ti.com> Cc: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> 24 September 2010, 18:05:01 UTC
66af83d usb: musb: gadget: fix dma length in txstate DMA length should not go beyond the availabe space of request buffer, so fix it. Also set max_len of cppi dma channel as max size of int type, so make musb dma handling happier. Signed-off-by: Ming Lei <tom.leiming@gmail.com> Cc: David Brownell <dbrownell@users.sourceforge.net> Cc: Anand Gadiyar <gadiyar@ti.com> Cc: Mike Frysinger <vapier@gentoo.org> Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> 24 September 2010, 18:05:01 UTC
bb27bc2 usb: musb: gadget: complete request only if data is transfered over Complete the current request only if the data transfer is over. Signed-off-by: Ming Lei <tom.leiming@gmail.com> Cc: David Brownell <dbrownell@users.sourceforge.net> Cc: Anand Gadiyar <gadiyar@ti.com> Cc: Mike Frysinger <vapier@gentoo.org> Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> 24 September 2010, 18:05:01 UTC
1018b4e usb: musb: gadget: fix DMA length for OUT transfer DMA length should not go beyond the availabe space of request buffer, so fix it. Signed-off-by: Ming Lei <tom.leiming@gmail.com> Acked-by: Anand Gadiyar <gadiyar@ti.com> Cc: David Brownell <dbrownell@users.sourceforge.net> Cc: Anand Gadiyar <gadiyar@ti.com> Cc: Mike Frysinger <vapier@gentoo.org> Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> 24 September 2010, 18:05:01 UTC
490e5fb usb: musb: gadget: enable autoclear for OUT transfer in both DMA 0 and DMA 1 This patch fixes one bugs of OUT transfer in double buffer case: -the current code only enable autoclear for dma mode 1, and not for dma mode 0 Without this patch, test #5 of usbtest can't be passed if we configure musb as g_zero and use fifo mode 3 to enable double buffer mode. With this patch and the following patch(fix dma length), on my beagle B5, test#5(queued bulk out) may go beyond 18Mbyte/s(seems dma mode 0 is quicker in double buffer case) if musb is configured as g_zero and fifo mode 3 is taken, follows the test command: #./testusb -D DEV_NAME -c 1024 -t 5 -s 32768 -g 8 [1] Also I have tested this patch can't make g_ether broken. [1],source of testusb : tools/usb/testusb.c under linux kernel; Signed-off-by: Ming Lei <tom.leiming@gmail.com> Cc: David Brownell <dbrownell@users.sourceforge.net> Cc: Anand Gadiyar <gadiyar@ti.com> Cc: Mike Frysinger <vapier@gentoo.org> Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> 24 September 2010, 18:05:00 UTC
eeb1b2a usb: musb: gadget: fix bulk IN infinit hangs in double buffer case This patch fixes one infinite hang of bulk IN transfer in double buffer case, the hang can be observed easily by test #6 of usbtest if musb is configured as g_zero and fifo mode 3 is taken to enable double fifo. In fact, the patch only removes the check for non-empty fifo before loading data from new request into fifo since the check is not correct: -in double buffer case, fifo may accommodate more than one packet, even though it has contained one packet already and is non-empty -since last DMA is completed before calling musb_g_tx, it is sure that fifo may accommodate at least one packet Without applying the patch, new requst enqueued from .complte may not have a chance to be loaded into fifo, then will never be completed and cause infinite hangs. With the patch, on my beagle B5, test#6(queued bulk in) can be passed and test result may go beyond 33Mbyte/s if musb is configured as g_zero and fifo mode 3 is taken, follows the test command: #testusb -D DEV_NAME -c 1024 -t 6 -s 32768 -g 8 [1] [1], -source of testusb : tools/usb/testusb.c under linux kernel; Signed-off-by: Ming Lei <tom.leiming@gmail.com> Acked-by: Anand Gadiyar <gadiyar@ti.com> Cc: David Brownell <dbrownell@users.sourceforge.net> Cc: Anand Gadiyar <gadiyar@ti.com> Cc: Mike Frysinger <vapier@gentoo.org> Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> 24 September 2010, 18:05:00 UTC
bd2e74d usb: musb: gadget: fix kernel panic if using out ep with FIFO_TXRX style For shared fifo hw endpoint(with FIFO_TXRX style), only ep_in field of musb_hw_ep is intialized in musb_g_init_endpoints, and ep_out is not initialized, but musb_g_rx and rxstate may access ep_out field of musb_hw_ep by the method below: musb_ep = &musb->endpoints[epnum].ep_out which can cause the kernel panic[1] below, this patch fixes the issue by getting 'musb_ep' from '&musb->endpoints[epnum].ep_in' for shared fifo endpoint. [1], kernel panic [root@OMAP3EVM /]# musb_interrupt 1583: ** IRQ peripheral usb0008 tx0000 rx4000 musb_stage0_irq 460: <== Power=f0, DevCtl=99, int_usb=0x8 musb_g_rx 772: <== (null), rxcsr 4007 ffffffe8 musb_g_rx 786: iso overrun on ffffffe8 Unable to handle kernel NULL pointer dereference at virtual address 00000008 pgd = c0004000 [00000008] *pgd=00000000 Internal error: Oops: 17 [#1] PREEMPT last sysfs file: /sys/devices/platform/musb_hdrc/usb1/usb_device/usbdev1.1/dev Modules linked in: g_zero CPU: 0 Tainted: G W (2.6.35-rc6-gkh-wl+ #92) PC is at musb_g_rx+0xfc/0x2ec LR is at vprintk+0x3f4/0x458 pc : [<c02c07a4>] lr : [<c006ccb0>] psr: 20000193 sp : c760bd78 ip : c03c9d70 fp : c760bdbc r10: 00000000 r9 : fa0ab1e0 r8 : 0000000e r7 : c7e80158 r6 : ffffffe8 r5 : 00000001 r4 : 00004003 r3 : 00010003 r2 : c760bcd8 r1 : c03cd030 r0 : 0000002e Flags: nzCv IRQs off FIQs on Mode SVC_32 ISA ARM Segment kernel Control: 10c5387d Table: 8778c019 DAC: 00000017 Process kmemleak (pid: 421, stack limit = 0xc760a2e8) Stack: (0xc760bd78 to 0xc760c000) bd60: ffffffe8 c04b1b58 bd80: ffffffe8 c7c01ac0 00000000 c7e80d24 c0084238 00000001 00000001 c7e80158 bda0: 0000000e 00000008 00000099 000000f0 c760be04 c760bdc0 c02bcd68 c02c06b4 bdc0: 00000099 00000008 00004000 c760bdd8 c03cc4f8 00000000 00000002 c7e80158 bde0: c7d2e300 60000193 c760a000 0000005c 00000000 00000000 c760be24 c760be08 be00: c02bcecc c02bc1ac c7d2e300 c7d2e300 0000005c c760a000 c760be54 c760be28 be20: c00ad698 c02bce6c 00000000 c7d2e300 c067c258 0000005c c067c294 00000001 be40: c760a000 00000000 c760be74 c760be58 c00af984 c00ad5fc 0000005c 00000000 be60: 00000000 00000002 c760be8c c760be78 c0039080 c00af8d0 ffffffff fa200000 be80: c760beec c760be90 c0039b6c c003900c 00000001 00000000 c7d1e240 00000000 bea0: 00000000 c068bae8 00000000 60000013 00000001 00000000 00000000 c760beec bec0: c0064ecc c760bed8 c00ff7d0 c003a0a8 60000013 ffffffff 00000000 c068bae8 bee0: c760bf24 c760bef0 c00ff7d0 c0064ec4 00000001 00000000 c00ff700 00000000 bf00: c0087f00 00000000 60000013 c0d76a70 c0e23795 00000001 c760bf4c c760bf28 bf20: c00ffdd8 c00ff70c c068bb08 c068bae8 60000013 c0100938 c068bb30 00000000 bf40: c760bf84 c760bf50 c010014c c00ffd84 00000001 00000000 c010000c 00012c00 bf60: c7c33f04 00012c00 c7c33f04 00000000 c0100938 00000000 c760bf9c c760bf88 bf80: c01009a8 c0100018 c760bfa8 c7c33f04 c760bff4 c760bfa0 c0088000 c0100944 bfa0: c760bf98 00000000 00000000 00000001 dead4ead ffffffff ffffffff c08ba2bc bfc0: 00000000 c049e7fa 00000000 c0087f70 c760bfd0 c760bfd0 c7c33f04 c0087f70 bfe0: c006f5e8 00000013 00000000 c760bff8 c006f5e8 c0087f7c 7f0004ff df2000ff Backtrace: [<c02c06a8>] (musb_g_rx+0x0/0x2ec) from [<c02bcd68>] (musb_interrupt+0xbc8/0xcc0) [<c02bc1a0>] (musb_interrupt+0x0/0xcc0) from [<c02bcecc>] (generic_interrupt+0x6c/0x84) [<c02bce60>] (generic_interrupt+0x0/0x84) from [<c00ad698>] (handle_IRQ_event+0xa8/0x1ec) r7:c760a000 r6:0000005c r5:c7d2e300 r4:c7d2e300 [<c00ad5f0>] (handle_IRQ_event+0x0/0x1ec) from [<c00af984>] (handle_level_irq+0xc0/0x13c) [<c00af8c4>] (handle_level_irq+0x0/0x13c) from [<c0039080>] (asm_do_IRQ+0x80/0xa0) r7:00000002 r6:00000000 r5:00000000 r4:0000005c [<c0039000>] (asm_do_IRQ+0x0/0xa0) from [<c0039b6c>] (__irq_svc+0x4c/0xb4) Exception stack(0xc760be90 to 0xc760bed8) be80: 00000001 00000000 c7d1e240 00000000 bea0: 00000000 c068bae8 00000000 60000013 00000001 00000000 00000000 c760beec bec0: c0064ecc c760bed8 c00ff7d0 c003a0a8 60000013 ffffffff r5:fa200000 r4:ffffffff [<c0064eb8>] (sub_preempt_count+0x0/0x100) from [<c00ff7d0>] (find_and_get_object+0xd0/0x110) r5:c068bae8 r4:00000000 [<c00ff700>] (find_and_get_object+0x0/0x110) from [<c00ffdd8>] (scan_block+0x60/0x104) r8:00000001 r7:c0e23795 r6:c0d76a70 r5:60000013 r4:00000000 [<c00ffd78>] (scan_block+0x0/0x104) from [<c010014c>] (kmemleak_scan+0x140/0x484) [<c010000c>] (kmemleak_scan+0x0/0x484) from [<c01009a8>] (kmemleak_scan_thread+0x70/0xcc) r8:00000000 r7:c0100938 r6:00000000 r5:c7c33f04 r4:00012c00 [<c0100938>] (kmemleak_scan_thread+0x0/0xcc) from [<c0088000>] (kthread+0x90/0x98) r5:c7c33f04 r4:c760bfa8 [<c0087f70>] (kthread+0x0/0x98) from [<c006f5e8>] (do_exit+0x0/0x684) r7:00000013 r6:c006f5e8 r5:c0087f70 r4:c7c33f04 Code: e3002312 e58d6000 e2833e16 eb0422d5 (e5963020) ---[ end trace f3d5e96f75c297b7 ]--- Signed-off-by: Ming Lei <tom.leiming@gmail.com> Reviewed-by: Sergei Shtylyov <sshtylyov@mvista.com> Cc: David Brownell <dbrownell@users.sourceforge.net> Cc: Anand Gadiyar <gadiyar@ti.com> Cc: Mike Frysinger <vapier@gentoo.org> Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com> Cc: stable <stable@kernel.org> Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> 24 September 2010, 18:05:00 UTC
0026e00 USB: fix bug in initialization of interface minor numbers Recent changes in the usbhid layer exposed a bug in usbcore. If CONFIG_USB_DYNAMIC_MINORS is enabled then an interface may be assigned a minor number of 0. However interfaces that aren't registered as USB class devices also have their minor number set to 0, during initialization. As a result usb_find_interface() may return the wrong interface, leading to a crash. This patch (as1418) fixes the problem by initializing every interface's minor number to -1. It also cleans up the usb_register_dev() function, which besides being somewhat awkwardly written, does not unwind completely on all its error paths. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Tested-by: Philip J. Turmel <philip@turmel.org> Tested-by: Gabriel Craciunescu <nix.or.die@googlemail.com> Tested-by: Alex Riesen <raa.lkml@gmail.com> Tested-by: Matthias Bayer <jackdachef@gmail.com> CC: Jiri Kosina <jkosina@suse.cz> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> 24 September 2010, 18:05:00 UTC
d3654cd Staging: ti-st: remove st_get_plat_device In order to support multiple ST platform devices, a new symbol 'st_get_plat_device' earlier needed to be exported by the arch/XX/brd-XX.c file which intends to add the ST platform device. On removing this dependency, now inside ST driver maintain the array of ST platform devices that would be registered. As of now let id=0, as and when we end up having such platforms where mutliple ST devices can exist, id would come from protocol drivers (BT, FM and GPS) as to on which platform device they want to register to. Signed-off-by: Pavan Savoy <pavan_savoy@ti.com> Acked-by: Randy Dunlap <randy.dunlap@oracle.com> Cc: Anca Emanuel <anca.emanuel@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> 24 September 2010, 18:04:32 UTC
63e6be6 perf, x86: Catch spurious interrupts after disabling counters Some cpus still deliver spurious interrupts after disabling a counter. This caused 'undelivered NMI' messages. This patch fixes this. Introduced by: 4177c42: perf, x86: Try to handle unknown nmis with an enabled PMU Reported-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Robert Richter <robert.richter@amd.com> Cc: Don Zickus <dzickus@redhat.com> Cc: gorcunov@gmail.com <gorcunov@gmail.com> Cc: fweisbec@gmail.com <fweisbec@gmail.com> Cc: ying.huang@intel.com <ying.huang@intel.com> Cc: ming.m.lin@intel.com <ming.m.lin@intel.com> Cc: yinghai@kernel.org <yinghai@kernel.org> Cc: andi@firstfloor.org <andi@firstfloor.org> Cc: eranian@google.com <eranian@google.com> Cc: Peter Zijlstra <peterz@infradead.org> LKML-Reference: <20100915162034.GO13563@erda.amd.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> 24 September 2010, 10:21:41 UTC
7329cf0 Merge branch 'amd-iommu/2.6.36' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/linux-2.6-iommu into x86/urgent 24 September 2010, 09:19:53 UTC
01fdf18 ALSA: hda - Fix auto-parse of SPDIF input of Realtek codecs The SPDIF in audio widget must be searched through the list as the widget that contains the given pin as the connection source. The current code was implemented in a reverse way. Signed-off-by: Takashi Iwai <tiwai@suse.de> 24 September 2010, 07:09:42 UTC
a850ea3 hugetlb, rmap: add BUG_ON(!PageLocked) in hugetlb_add_anon_rmap() Confirming page lock is held in hugetlb_add_anon_rmap() may be useful to detect possible future problems. Signed-off-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Acked-by: Rik van Riel <riel@redhat.com> Acked-by: Andrea Arcangeli <aarcange@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 24 September 2010, 00:29:19 UTC
56c9cfb hugetlb, rmap: fix confusing page locking in hugetlb_cow() The "if (!trylock_page)" block in the avoidcopy path of hugetlb_cow() looks confusing and is buggy. Originally this trylock_page() was intended to make sure that old_page is locked even when old_page != pagecache_page, because then only pagecache_page is locked. This patch fixes it by moving page locking into hugetlb_fault(). Signed-off-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Acked-by: Rik van Riel <riel@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 24 September 2010, 00:29:18 UTC
cd67f0d hugetlb, rmap: use hugepage_add_new_anon_rmap() in hugetlb_cow() Obviously, setting anon_vma for COWed hugepage should be done by hugepage_add_new_anon_rmap() to scan vmas faster. This patch fixes it. Signed-off-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Acked-by: Andrea Arcangeli <aarcange@redhat.com> Reviewed-by: Rik van Riel <riel@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 24 September 2010, 00:29:18 UTC
433abed hugetlb, rmap: always use anon_vma root pointer This patch applies Andrea's fix given by the following patch into hugepage rmapping code: commit 288468c334e98aacbb7e2fb8bde6bc1adcd55e05 Author: Andrea Arcangeli <aarcange@redhat.com> Date: Mon Aug 9 17:19:09 2010 -0700 This patch uses anon_vma->root and avoids unnecessary overwriting when anon_vma is already set up. Signed-off-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Acked-by: Andrea Arcangeli <aarcange@redhat.com> Reviewed-by: Rik van Riel <riel@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 24 September 2010, 00:29:18 UTC
201ba4c vgaarb: trivial fix Correct function being needlessly visible outside compilation unit when the only users are internal. Signed-off-by: Daniel J Blueman <daniel.blueman@gmail.com> Reviewed-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com> 24 September 2010, 00:13:44 UTC
bcf835e Merge branch 'kvm-updates/2.6.36' of git://git.kernel.org/pub/scm/virt/kvm/kvm * 'kvm-updates/2.6.36' of git://git.kernel.org/pub/scm/virt/kvm/kvm: KVM: Fix reboot on Intel hosts KVM: fix irqfd assign/deassign race 24 September 2010, 00:13:17 UTC
4417d7f drm: radeon cleanup fixes... Fix string interpreted as trigraph and typo. Signed-off-by: Daniel J Blueman <daniel.blueman@gmail.com> Reviewed-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com> 24 September 2010, 00:12:49 UTC
d3147e8 drm: fix trivial coding errors Correct function storage class, and correct assignment type. Signed-off-by: Daniel J Blueman <daniel.blueman@gmail.com> Reviewed-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com> 24 September 2010, 00:10:23 UTC
0e57a3c drm: ttm sparse fixes. Correct allocation flags type and function prototype for ANSI C compliance. [airlied: whitespace fixed] Signed-off-by: Daniel J Blueman <daniel.blueman@gmail.com> Reviewed-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com> 24 September 2010, 00:09:08 UTC
a5d6082 drm/nouveau: fix panels using straps-based mode detection nouveau_bios_fp_mode() zeroes the mode struct before filling in relevant entries. This nukes the mode id initialised by drm_mode_create(), and causes warnings from idr when we try to remove the mode. Signed-off-by: Ben Skeggs <bskeggs@redhat.com> Signed-off-by: Dave Airlie <airlied@redhat.com> 24 September 2010, 00:05:28 UTC
5dad6c3 o2dlm: force free mles during dlm exit While umounting, a block mle doesn't get freed if dlm is shutdown after master request is received but before assert master. This results in unclean shutdown of dlm domain. This patch frees all mles that lie around after other nodes were notified about exiting the dlm and marking dlm state as leaving. Only block mles are expected to be around, so we log ERROR for other mles but still free them. Signed-off-by: Srinivas Eeda <srinivas.eeda@oracle.com> Signed-off-by: Joel Becker <joel.becker@oracle.com> 23 September 2010, 21:16:53 UTC
0000b86 ocfs2: Sync inode flags with ext2. We sync our inode flags with ext2 and define them by hex values. But actually in commit 3669567(4 years ago), all these values are moved to include/linux/fs.h. So we'd better also use them as what ext2 did. So sync our inode flags with ext2 by using FS_*. Signed-off-by: Tao Ma <tao.ma@oracle.com> Signed-off-by: Joel Becker <joel.becker@oracle.com> 23 September 2010, 21:16:49 UTC
4a452de ocfs2: Move 'wanted' into parens of ocfs2_resmap_resv_bits. The first time I read the function ocfs2_resmap_resv_bits, I consider about what 'wanted' will be used and consider about the comments. Then I find it is only used if the reservation is empty. ;) So we'd better move it to the parens so that it make the code more readable, what's more, ocfs2_resmap_resv_bits is used so frequently and we should save some cpus. Acked-by: Mark Fasheh <mfasheh@suse.com> Signed-off-by: Tao Ma <tao.ma@oracle.com> Signed-off-by: Joel Becker <joel.becker@oracle.com> 23 September 2010, 21:16:47 UTC
47dea42 ocfs2: Use cpu_to_le16 for e_leaf_clusters in ocfs2_bg_discontig_add_extent. e_leaf_clusters is a le16, so use cpu_to_le16 instead of cpu_to_le32. What's more, we change 'clusters' to unsigned int to signify that the size of 'clusters' isn't important here. Signed-off-by: Tao Ma <tao.ma@oracle.com> Signed-off-by: Joel Becker <joel.becker@oracle.com> 23 September 2010, 21:16:34 UTC
1282806 ocfs2: update ctime when changing the file's permission by setfacl In commit 30e2bab, ext3 fixed it. So change it accordingly in ocfs2. Steps to reproduce: # touch aaa # stat -c %Z aaa 1283760364 # setfacl -m 'u::x,g::x,o::x' aaa # stat -c %Z aaa 1283760364 Signed-off-by: Tao Ma <tao.ma@oracle.com> Signed-off-by: Joel Becker <joel.becker@oracle.com> 23 September 2010, 21:16:21 UTC
91e71c1 Merge branch 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mjg59/platform-drivers-x86 * 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mjg59/platform-drivers-x86: thinkpad-acpi: avoid keymap pitfall Change MSI LAPTOP driver maintainer to Lee, Chun-Yi 23 September 2010, 20:30:13 UTC
fc6e756 thinkpad-acpi: avoid keymap pitfall Change the code so that it will use the correct size for keymap entries. Do it in a way that makes it harder to screw it up in the future. Reported-by: Jaime Velasco Juan <jsagarribay@gmail.com> Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br> Signed-off-by: Matthew Garrett <mjg@redhat.com> 23 September 2010, 19:42:04 UTC
58e226c Change MSI LAPTOP driver maintainer to Lee, Chun-Yi Change MSI LAPTOP driver maintainer from Lennart Poettering to Lee, Chun-Yi. MSI is a Taiwan OEM company, Lee, Chun-Yi can more easy to contact with MSI and maintain msi-laptop driver. Thank's for Lennart Poettering's contribute, Lee, Chun-Yi will base on his article to continue maintain the msi-laptop driver. Signed-off-by: Lee, Chun-Yi <jlee@novell.com> Signed-off-by: Matthew Garrett <mjg@redhat.com> 23 September 2010, 19:42:00 UTC
ed3473b MN10300: Arch doesn't support HAVE_ARCH_TRACEHOOK Remove specification of HAVE_ARCH_TRACEHOOK for MN10300 as the arch does not support it at this time. Signed-off-by: Mark Salter <msalter@redhat.com> Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 23 September 2010, 17:20:58 UTC
a6ef9c8 MN10300: Fix SIGRTMAX SIGRTMAX should be _NSIG not _NSIG-1. Signed-off-by: Mark Salter <msalter@redhat.com> Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 23 September 2010, 17:20:57 UTC
fd429a0 MN10300: Fix endianess of ext2 bitops The MN10300 arch ext2 bitops assume a big-endian kernel, but the MN10300 arch only runs in little-endian mode. Reported-by: Akira Takeuchi <takeuchi.akr@jp.panasonic.com> Signed-off-by: Mark Salter <msalter@redhat.com> Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 23 September 2010, 16:12:21 UTC
57aebd7 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/percpu * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/percpu: percpu: fix pcpu_last_unit_cpu 23 September 2010, 15:06:55 UTC
ca242ac KVM: Fix reboot on Intel hosts When we reboot, we disable vmx extensions or otherwise INIT gets blocked. If a task on another cpu hits a vmx instruction, it will fault if vmx is disabled. We trap that to avoid a nasty oops and spin until the reboot completes. Problem is, we sleep with interrupts disabled. This blocks smp_send_stop() from running, and the reboot process halts. Fix by enabling interrupts before spinning. KVM-Stable-Tag. Signed-off-by: Avi Kivity <avi@redhat.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com> 23 September 2010, 14:31:56 UTC
6bbfb26 KVM: fix irqfd assign/deassign race I think I see the following (theoretical) race: During irqfd assign, we drop irqfds lock before we schedule inject work. Therefore, deassign running on another CPU could cause shutdown and flush to run before inject, causing user after free in inject. A simple fix it to schedule inject under the lock. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Gregory Haskins <ghaskins@novell.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com> 23 September 2010, 14:31:51 UTC
04e0463 x86/amd-iommu: Fix rounding-bug in __unmap_single In the __unmap_single function the dma_addr is rounded down to a page boundary before the dma pages are unmapped. The address is later also used to flush the TLB entries for that mapping. But without the offset into the dma page the amount of pages to flush might be miscalculated in the TLB flushing path. This patch fixes this bug by using the original address to flush the TLB. Cc: stable@kernel.org Signed-off-by: Joerg Roedel <joerg.roedel@amd.com> 23 September 2010, 14:26:20 UTC
4c894f4 x86/amd-iommu: Work around S3 BIOS bug This patch adds a workaround for an IOMMU BIOS problem to the AMD IOMMU driver. The result of the bug is that the IOMMU does not execute commands anymore when the system comes out of the S3 state resulting in system failure. The bug in the BIOS is that is does not restore certain hardware specific registers correctly. This workaround reads out the contents of these registers at boot time and restores them on resume from S3. The workaround is limited to the specific IOMMU chipset where this problem occurs. Cc: stable@kernel.org Signed-off-by: Joerg Roedel <joerg.roedel@amd.com> 23 September 2010, 14:26:03 UTC
e9bf519 x86/amd-iommu: Set iommu configuration flags in enable-loop This patch moves the setting of the configuration and feature flags out out the acpi table parsing path and moves it into the iommu-enable path. This is needed to reliably fix resume-from-s3. Cc: stable@kernel.org Signed-off-by: Joerg Roedel <joerg.roedel@amd.com> 23 September 2010, 14:24:50 UTC
258af47 tracing/x86: Don't use mcount in kvmclock.c The guest can use the paravirt clock in kvmclock.c which is used by sched_clock(), which in turn is used by the tracing mechanism for timestamps, which leads to infinite recursion. Disable mcount/tracing for kvmclock.o. Cc: stable@kernel.org Cc: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Cc: Avi Kivity <avi@redhat.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org> 23 September 2010, 03:01:19 UTC
9ecd4e1 tracing/x86: Don't use mcount in pvclock.c When using a paravirt clock, pvclock.c can be used by sched_clock(), which in turn is used by the tracing mechanism for timestamps, which leads to infinite recursion. Disable mcount/tracing for pvclock.o. Cc: stable@kernel.org Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> LKML-Reference: <4C9A9A3F.4040201@goop.org> Signed-off-by: Steven Rostedt <rostedt@goodmis.org> 23 September 2010, 03:00:50 UTC
561f818 ipmi: fix hardcoded ipmi device exit path warning When modprobe.conf has options ipmi_si type="kcs" ports=0xCA2 regspacings="4" ipmi_si can be loaded properly, but when try to unload it get: Sep 20 15:00:27 xx abrt: Kerneloops: Reported 1 kernel oopses to Abrt Sep 20 15:00:27 xx abrtd: Directory 'kerneloops-1285020027-1' creation detected Sep 20 15:00:27 xx abrtd: New crash /var/spool/abrt/kerneloops-1285020027-1, processing Sep 20 15:01:09 xx kernel: ------------[ cut here ]------------ Sep 20 15:01:09 xx kernel: WARNING: at drivers/base/driver.c:262 driver_unregister+0x8a/0xa0() Sep 20 15:01:09 xx kernel: Hardware name: Sun Fire x4800 Sep 20 15:01:09 xx kernel: Unexpected driver unregister! Sep 20 15:01:09 xx kernel: Modules linked in: ipmi_si(-) ipmi_msghandler ip6table_filter ip6_tables ebtable_nat ebtables ipt_MASQUERADE iptable_nat nf_nat bridge stp llc autofs4 sunrpc cpufreq_ondemand acpi_cpufreq freq_table mperf xt_physdev be2iscsi iscsi_boot_sysfs bnx2i cnic uio cxgb3i iw_cxgb3 cxgb3 mdio ib_iser rdma_cm ib_cm iw_cm ib_sa ib_mad ib_core ib_addr ipv6 iscsi_tcp libiscsi_tcp libiscsi scsi_transport_iscsi dm_mirror dm_region_hash dm_log dm_mod vhost_net macvtap macvlan tun kvm_intel kvm uinput sg ses enclosure ahci libahci pcspkr i2c_i801 i2c_core iTCO_wdt iTCO_vendor_support igb dca i7core_edac edac_core ext3 jbd mbcache sd_mod crc_t10dif megaraid_sas [last unloaded: ipmi_devintf] Sep 20 15:01:09 xx kernel: Pid: 10625, comm: modprobe Tainted: G W 2.6.36-rc5-tip+ #6 Sep 20 15:01:09 xx kernel: Call Trace: Sep 20 15:01:09 xx kernel: [<ffffffff810600df>] warn_slowpath_common+0x7f/0xc0 Sep 20 15:01:09 xx kernel: [<ffffffff810601d6>] warn_slowpath_fmt+0x46/0x50 Sep 20 15:01:09 xx kernel: [<ffffffff812ff60a>] driver_unregister+0x8a/0xa0 Sep 20 15:01:09 xx kernel: [<ffffffff812ae112>] pnp_unregister_driver+0x12/0x20 Sep 20 15:01:09 xx kernel: [<ffffffffa01d0327>] cleanup_ipmi_si+0x3c/0xa7 [ipmi_si] Sep 20 15:01:09 xx kernel: [<ffffffff81099a60>] sys_delete_module+0x1a0/0x270 Sep 20 15:01:09 xx kernel: [<ffffffff814b7070>] ? do_page_fault+0x150/0x320 Sep 20 15:01:09 xx kernel: [<ffffffff8100b072>] system_call_fastpath+0x16/0x1b Sep 20 15:01:09 xx kernel: ---[ end trace 0d1967161adcee0d ]--- We need to check if ipmi_pnp_driver is loaded before we try to unload it. Signed-off-by: Yinghai Lu <yinghai@kernel.org> Cc: Corey Minyard <minyard@acm.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 23 September 2010, 00:22:40 UTC
f501ed5 rtc: s3c: balance state changes of wakeup flag This change resolves a problem about unbalanced calls of enable_irq_wakeup() and disable_irq_wakeup() for alarm interrupt. Bug reproduction: root@eb600:~# echo 0 > /sys/class/rtc/rtc0/wakealarm WARNING: at kernel/irq/manage.c:361 set_irq_wake+0x7c/0xe4() Unbalanced IRQ 46 wake disable Modules linked in: [<c0025708>] (unwind_backtrace+0x0/0xd8) from [<c003358c>] (warn_slowpath_common+0x44/0x5c) [<c003358c>] (warn_slowpath_common+0x44/0x5c) from [<c00335dc>] (warn_slowpath_fmt+0x24/0x30) [<c00335dc>] (warn_slowpath_fmt+0x24/0x30) from [<c0058c20>] (set_irq_wake+0x7c/0xe4) [<c0058c20>] (set_irq_wake+0x7c/0xe4) from [<c01b5e80>] (s3c_rtc_setalarm+0xa8/0xb8) [<c01b5e80>] (s3c_rtc_setalarm+0xa8/0xb8) from [<c01b47a0>] (rtc_set_alarm+0x60/0x74) [<c01b47a0>] (rtc_set_alarm+0x60/0x74) from [<c01b5a98>] (rtc_sysfs_set_wakealarm+0xc8/0xd8) [<c01b5a98>] (rtc_sysfs_set_wakealarm+0xc8/0xd8) from [<c01891ec>] (dev_attr_store+0x20/0x24) [<c01891ec>] (dev_attr_store+0x20/0x24) from [<c00be934>] (sysfs_write_file+0x104/0x13c) [<c00be934>] (sysfs_write_file+0x104/0x13c) from [<c0080e7c>] (vfs_write+0xb0/0x158) [<c0080e7c>] (vfs_write+0xb0/0x158) from [<c0080fcc>] (sys_write+0x3c/0x68) [<c0080fcc>] (sys_write+0x3c/0x68) from [<c0020ec0>] (ret_fast_syscall+0x0/0x28) Signed-off-by: Vladimir Zapolskiy <vzapolskiy@gmail.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Ben Dooks <ben@fluff.org.uk> Cc: Atul Dahiya <atul.dahiya@samsung.com> Cc: Taekgyun Ko <taeggyun.ko@samsung.com> Cc: Kukjin Kim <kgene.kim@samsung.com> Cc: <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 23 September 2010, 00:22:40 UTC
2aeadc3 mmap: call unlink_anon_vmas() in __split_vma() in case of error If __split_vma fails because of an out of memory condition the anon_vma_chain isn't teardown and freed potentially leading to rmap walks accessing freed vma information plus there's a memleak. Signed-off-by: Andrea Arcangeli <aarcange@redhat.com> Acked-by: Johannes Weiner <jweiner@redhat.com> Acked-by: Rik van Riel <riel@redhat.com> Acked-by: Hugh Dickins <hughd@google.com> Cc: Marcelo Tosatti <mtosatti@redhat.com> Cc: <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 23 September 2010, 00:22:40 UTC
a247c3a rmap: fix walk during fork The below bug in fork led to the rmap walk finding the parent huge-pmd twice instead of just once, because the anon_vma_chain objects of the child vma still point to the vma->vm_mm of the parent. The patch fixes it by making the rmap walk accurate during fork. It's not a big deal normally but it worth being accurate considering the cost is the same. Signed-off-by: Andrea Arcangeli <aarcange@redhat.com> Acked-by: Johannes Weiner <jweiner@redhat.com> Acked-by: Rik van Riel <riel@redhat.com> Acked-by: Hugh Dickins <hughd@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 23 September 2010, 00:22:39 UTC
df08cdc drivers/pci/intel-iommu.c: fix build with older gcc's drivers/pci/intel-iommu.c: In function `__iommu_calculate_agaw': drivers/pci/intel-iommu.c:437: sorry, unimplemented: inlining failed in call to 'width_to_agaw': function body not available drivers/pci/intel-iommu.c:445: sorry, unimplemented: called from here Move the offending function (and its siblings) to top-of-file, remove the forward declaration. Addresses https://bugzilla.kernel.org/show_bug.cgi?id=17441 Reported-by: Martin Mokrejs <mmokrejs@ribosome.natur.cuni.cz> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Jesse Barnes <jbarnes@virtuousgeek.org> Cc: <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 23 September 2010, 00:22:39 UTC
e85bfd3 oom: filter unkillable tasks from tasklist dump /proc/sys/vm/oom_dump_tasks is enabled by default, so it's necessary to limit as much information as possible that it should emit. The tasklist dump should be filtered to only those tasks that are eligible for oom kill. This is already done for memcg ooms, but this patch extends it to both cpuset and mempolicy ooms as well as init. In addition to suppressing irrelevant information, this also reduces confusion since users currently don't know which tasks in the tasklist aren't eligible for kill (such as those attached to cpusets or bound to mempolicies with a disjoint set of mems or nodes, respectively) since that information is not shown. Signed-off-by: David Rientjes <rientjes@google.com> Reviewed-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 23 September 2010, 00:22:39 UTC
fd02db9 drivers/video/sis/sis_main.c: prevent reading uninitialized stack memory The FBIOGET_VBLANK device ioctl allows unprivileged users to read 16 bytes of uninitialized stack memory, because the "reserved" member of the fb_vblank struct declared on the stack is not altered or zeroed before being copied back to the user. This patch takes care of it. Signed-off-by: Dan Rosenberg <dan.j.rosenberg@gmail.com> Cc: Thomas Winischhofer <thomas@winischhofer.net> Cc: <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 23 September 2010, 00:22:39 UTC
cb1dcc0 uml: fix compile warning This fixes: incompatible pointer type: => 89 arch/um/kernel/exec.c: warning: passing argument 2 of 'execve1' from incompatible pointer type: => 69, 85 arch/um/kernel/exec.c: warning: passing argument 3 of 'execve1' from incompatible pointer type: => 69, 85 which was introduced by d7627467b7a8d ("Make do_execve() take a const filename pointer") Signed-off-by: Richard Weinberger <richard@nod.at> Cc: David Howells <dhowells@redhat.com> Cc: Jeff Dike <jdike@addtoit.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 23 September 2010, 00:22:39 UTC
1c2499a /proc/pid/smaps: fix dirty pages accounting Currently, /proc/<pid>/smaps has wrong dirty pages accounting. Shared_Dirty and Private_Dirty output only pte dirty pages and ignore PG_dirty page flag. It is difference against documentation, but also inconsistent against Referenced field. (Referenced checks both pte and page flags) This patch fixes it. Test program: large-array.c --------------------------------------------------- #include <stdio.h> #include <stdlib.h> #include <string.h> #include <unistd.h> char array[1*1024*1024*1024L]; int main(void) { memset(array, 1, sizeof(array)); pause(); return 0; } --------------------------------------------------- Test case: 1. run ./large-array 2. cat /proc/`pidof large-array`/smaps 3. swapoff -a 4. cat /proc/`pidof large-array`/smaps again Test result: <before patch> 00601000-40601000 rw-p 00000000 00:00 0 Size: 1048576 kB Rss: 1048576 kB Pss: 1048576 kB Shared_Clean: 0 kB Shared_Dirty: 0 kB Private_Clean: 218992 kB <-- showed pages as clean incorrectly Private_Dirty: 829584 kB Referenced: 388364 kB Swap: 0 kB KernelPageSize: 4 kB MMUPageSize: 4 kB <after patch> 00601000-40601000 rw-p 00000000 00:00 0 Size: 1048576 kB Rss: 1048576 kB Pss: 1048576 kB Shared_Clean: 0 kB Shared_Dirty: 0 kB Private_Clean: 0 kB Private_Dirty: 1048576 kB <-- fixed Referenced: 388480 kB Swap: 0 kB KernelPageSize: 4 kB MMUPageSize: 4 kB Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Acked-by: Hugh Dickins <hughd@google.com> Cc: Matt Mackall <mpm@selenic.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 23 September 2010, 00:22:39 UTC
142092e fbcon: fix lockdep warning from fbcon_deinit() Fix the lockdep warning: [ 13.657164] INFO: trying to register non-static key. [ 13.657169] the code is fine but needs lockdep annotation. [ 13.657171] turning off the locking correctness validator. [ 13.657177] Pid: 622, comm: modprobe Not tainted 2.6.36-rc3c #8 [ 13.657180] Call Trace: [ 13.657194] [<c13002c8>] ? printk+0x18/0x20 [ 13.657202] [<c1056cf6>] register_lock_class+0x336/0x350 [ 13.657208] [<c1058bf9>] __lock_acquire+0x449/0x1180 [ 13.657215] [<c1059997>] lock_acquire+0x67/0x80 [ 13.657222] [<c1042bf1>] ? __cancel_work_timer+0x51/0x230 [ 13.657227] [<c1042c23>] __cancel_work_timer+0x83/0x230 [ 13.657231] [<c1042bf1>] ? __cancel_work_timer+0x51/0x230 [ 13.657236] [<c10582b2>] ? mark_held_locks+0x62/0x80 [ 13.657243] [<c10b3a2f>] ? kfree+0x7f/0xe0 [ 13.657248] [<c105853c>] ? trace_hardirqs_on_caller+0x11c/0x160 [ 13.657253] [<c105858b>] ? trace_hardirqs_on+0xb/0x10 [ 13.657259] [<c117f4cd>] ? fbcon_deinit+0x16d/0x1e0 [ 13.657263] [<c117f4cd>] ? fbcon_deinit+0x16d/0x1e0 [ 13.657268] [<c1042dea>] cancel_work_sync+0xa/0x10 [ 13.657272] [<c117f444>] fbcon_deinit+0xe4/0x1e0 ... The warning is caused by trying to cancel an uninitialized work from fbcon_exit(). Fix it by adding a check for queue.func, similarly to other places in this code. Signed-off-by: Jarek Poplawski <jarkao2@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 23 September 2010, 00:22:39 UTC
a5757c2 efifb: support the EFI framebuffer on more Apple hardware Enable the EFI framebuffer on 14 more Macs, including the iMac11,1 iMac10,1 iMac8,1 Macmini3,1 Macmini4,1 MacBook5,1 MacBook6,1 MacBook7,1 MacBookPro2,2 MacBookPro5,2 MacBookPro5,3 MacBookPro6,1 MacBookPro6,2 and MacBookPro7,1 Information gathered from various user submissions. https://bugzilla.redhat.com/show_bug.cgi?id=528232 http://ubuntuforums.org/showthread.php?t=1557326 [akpm@linux-foundation.org: coding-style fixes] Signed-off-by: Luke Macken <lmacken@redhat.com> Signed-off-by: Peter Jones <pjones@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 23 September 2010, 00:22:39 UTC
85a00d9 efifb: check that the base address is plausible on pci systems Some Apple machines have identical DMI data but different memory configurations for the video. Given that, check that the address in our table is actually within the range of a PCI BAR on a VGA device in the machine. This also fixes up the return value from set_system(), which has always been wrong, but never resulted in bad behavior since there's only ever been one matching entry in the dmi table. The patch 1) stops people's machines from crashing when we get their display wrong, which seems to be unfortunately inevitable, 2) allows us to support identical dmi data with differing video memory configurations This also adds me as the efifb maintainer, since I've effectively been acting as such for quite some time. Signed-off-by: Peter Jones <pjones@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 23 September 2010, 00:22:39 UTC
a0c42ba aio: do not return ERESTARTSYS as a result of AIO OCFS2 can return ERESTARTSYS from its write function when the process is signalled while waiting for a cluster lock (and the filesystem is mounted with intr mount option). Generally, it seems reasonable to allow filesystems to return this error code from its IO functions. As we must not leak ERESTARTSYS (and similar error codes) to userspace as a result of an AIO operation, we have to properly convert it to EINTR inside AIO code (restarting the syscall isn't really an option because other AIO could have been already submitted by the same io_submit syscall). Signed-off-by: Jan Kara <jack@suse.cz> Reviewed-by: Jeff Moyer <jmoyer@redhat.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Zach Brown <zach.brown@oracle.com> Cc: <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 23 September 2010, 00:22:39 UTC
d190836 vmscan: check all_unreclaimable in direct reclaim path M. Vefa Bicakci reported 2.6.35 kernel hang up when hibernation on his 32bit 3GB mem machine. (https://bugzilla.kernel.org/show_bug.cgi?id=16771). Also he bisected the regression to commit bb21c7ce18eff8e6e7877ca1d06c6db719376e3c Author: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Date: Fri Jun 4 14:15:05 2010 -0700 vmscan: fix do_try_to_free_pages() return value when priority==0 reclaim failure At first impression, this seemed very strange because the above commit only chenged function return value and hibernate_preallocate_memory() ignore return value of shrink_all_memory(). But it's related. Now, page allocation from hibernation code may enter infinite loop if the system has highmem. The reasons are that vmscan don't care enough OOM case when oom_killer_disabled. The problem sequence is following as. 1. hibernation 2. oom_disable 3. alloc_pages 4. do_try_to_free_pages if (scanning_global_lru(sc) && !all_unreclaimable) return 1; If kswapd is not freozen, it would set zone->all_unreclaimable to 1 and then shrink_zones maybe return true(ie, all_unreclaimable is true). So at last, alloc_pages could go to _nopage_. If it is, it should have no problem. This patch adds all_unreclaimable check to protect in direct reclaim path, too. It can care of hibernation OOM case and help bailout all_unreclaimable case slightly. Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Signed-off-by: Minchan Kim <minchan.kim@gmail.com> Reported-by: M. Vefa Bicakci <bicave@superonline.com> Reported-by: <caiqian@redhat.com> Reviewed-by: Johannes Weiner <hannes@cmpxchg.org> Tested-by: <caiqian@redhat.com> Acked-by: Rafael J. Wysocki <rjw@sisk.pl> Acked-by: Rik van Riel <riel@redhat.com> Acked-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Balbir Singh <balbir@in.ibm.com> Cc: <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 23 September 2010, 00:22:39 UTC
eba93fc drivers/rtc/rtc-ab3100.c: add missing platform_set_drvdata() in ab3100_rtc_probe() Otherwise, calling platform_get_drvdata() in ab3100_rtc_remove() returns NULL. Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by:Wan ZongShun <mcuos.com@gmail.com> Acked-by: Linus Walleij <linus.walleij@stericsson.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 23 September 2010, 00:22:39 UTC
f566551 MAINTAINERS: change AVR32 and AT32AP maintainer Alter the maintainer of the AVR32 architecture and the AVR32/AT32AP machine support to me. Haavard is moving on to new challenges, and we've found it better to transfer the maintainer part to me. I will have good contact with Haavard anyway. Signed-off-by: Hans-Christian Egtvedt <hans-christian.egtvedt@atmel.com> Acked-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 23 September 2010, 00:22:38 UTC
d544b7a vmware balloon: rename module In an effort to minimize customer confusion we want to unify naming convention for VMware-provided kernel modules. This change renames the balloon driver from vmware_ballon to vmw_balloon. We expect to follow this naming convention (vmw_<module_name>) for all modules that are part of mainline kernel and/or being distributed by VMware, with the sole exception of vmxnet3 driver (since the name of mainline driver happens to match with the name used in VMware Tools). Signed-off-by: Dmitry Torokhov <dtor@vmware.com> Acked-by: Bhavesh Davda <bhavesh@vmware.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 23 September 2010, 00:22:38 UTC
back to top