Revision 6ad4e91c6d796b38a7f0e724db1de28eeb122bad authored by Moshe Shemesh on 09 May 2018, 15:35:13 UTC, committed by David S. Miller on 10 May 2018, 20:09:05 UTC
Add check of coalescing parameters received through ethtool are within
range of values supported by the HW.
Driver gets the coalescing rx/tx-usecs and rx/tx-frames as set by the
users through ethtool. The ethtool support up to 32 bit value for each.
However, mlx4 modify cq limits the coalescing time parameter and
coalescing frames parameters to 16 bits.
Return out of range error if user tries to set these parameters to
higher values.
Change type of sample-interval and adaptive_rx_coal parameters in mlx4
driver to u32 as the ethtool holds them as u32 and these parameters are
not limited due to mlx4 HW.
Fixes: c27a02cd94d6 ('mlx4_en: Add driver for Mellanox ConnectX 10GbE NIC')
Signed-off-by: Moshe Shemesh <moshe@mellanox.com>
Signed-off-by: Tariq Toukan <tariqt@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
1 parent aca06ea
| File | Mode | Size |
|---|---|---|
| Documentation | ||
| LICENSES | ||
| arch | ||
| block | ||
| certs | ||
| crypto | ||
| drivers | ||
| firmware | ||
| fs | ||
| include | ||
| init | ||
| ipc | ||
| kernel | ||
| lib | ||
| mm | ||
| net | ||
| samples | ||
| scripts | ||
| security | ||
| sound | ||
| tools | ||
| usr | ||
| virt | ||
| .clang-format | -rw-r--r-- | 12.8 KB |
| .cocciconfig | -rw-r--r-- | 59 bytes |
| .get_maintainer.ignore | -rw-r--r-- | 31 bytes |
| .gitattributes | -rw-r--r-- | 30 bytes |
| .gitignore | -rw-r--r-- | 1.5 KB |
| .mailmap | -rw-r--r-- | 9.2 KB |
| COPYING | -rw-r--r-- | 423 bytes |
| CREDITS | -rw-r--r-- | 96.3 KB |
| Kbuild | -rw-r--r-- | 2.2 KB |
| Kconfig | -rw-r--r-- | 287 bytes |
| MAINTAINERS | -rw-r--r-- | 442.7 KB |
| Makefile | -rw-r--r-- | 61.0 KB |
| README | -rw-r--r-- | 800 bytes |
Computing file changes ...
