https://github.com/torvalds/linux
Revision 6edd94db250038c8fdf176f23ca4017d2f312509 authored by Tarun Kanti DebBarma on 30 April 2012, 07:20:12 UTC, committed by Kevin Hilman on 10 May 2012, 14:16:15 UTC
Initialization of irqenable, irqstatus registers is the common operation done in this function for all OMAP platforms, viz. OMAP1, OMAP2+. The latter _gpio_rmw()'s which supposedly got introduced wrongly to take care of OMAP2+ platforms were overwriting initially programmed OMAP1 value breaking functionality on OMAP1. Somehow incorrect assumption was made that each _gpio_rmw()'s were mutually exclusive. On close observation it is found that the first _gpio_rmw() which is supposedly done to take care of OMAP1 platform is generic enough and takes care of OMAP2+ platform as well. Therefore remove the latter _gpio_rmw() to irqenable as they are redundant now. Writing to ctrl and debounce_en registers for OMAP2+ platforms are modified to match the original(pre-cleanup) code where the registers are initialized with 0. In the cleanup series since we are using _gpio_rmw(reg, 0, 1), instead of __raw_writel(), we are just reading and writing the same values to ctrl and debounce_en. This is not an issue for debounce_en register because it has 0x0 as the default value. But in the case of ctrl register the default value is 0x2 (GATINGRATIO = 0x1) so that we end up writing 0x2 instead of intended 0 value. Therefore changing back to __raw_writel() as this is sufficient for this case besides simpler to understand. Also, change irqstatus initalization logic that avoids comparison with bool, besides making it fit in a single line. Cc: stable@vger.kernel.org Cc: Tony Lindgren <tony@atomide.com> Cc: Kevin Hilman <khilman@ti.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Cc: Grant Likely <grant.likely@secretlab.ca> Reported-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl> Tested-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl> Signed-off-by: Tarun Kanti DebBarma <tarun.kanti@ti.com> Signed-off-by: Kevin Hilman <khilman@ti.com>
1 parent d48b97b
Tip revision: 6edd94db250038c8fdf176f23ca4017d2f312509 authored by Tarun Kanti DebBarma on 30 April 2012, 07:20:12 UTC
gpio/omap: fix incorrect initialization of omap_gpio_mod_init
gpio/omap: fix incorrect initialization of omap_gpio_mod_init
Tip revision: 6edd94d
File | Mode | Size |
---|---|---|
Documentation | ||
arch | ||
block | ||
crypto | ||
drivers | ||
firmware | ||
fs | ||
include | ||
init | ||
ipc | ||
kernel | ||
lib | ||
mm | ||
net | ||
samples | ||
scripts | ||
security | ||
sound | ||
tools | ||
usr | ||
virt | ||
.gitignore | -rw-r--r-- | 1014 bytes |
.mailmap | -rw-r--r-- | 4.2 KB |
COPYING | -rw-r--r-- | 18.3 KB |
CREDITS | -rw-r--r-- | 92.8 KB |
Kbuild | -rw-r--r-- | 2.5 KB |
Kconfig | -rw-r--r-- | 252 bytes |
MAINTAINERS | -rw-r--r-- | 205.3 KB |
Makefile | -rw-r--r-- | 52.2 KB |
README | -rw-r--r-- | 17.0 KB |
REPORTING-BUGS | -rw-r--r-- | 3.3 KB |
Computing file changes ...