Revision 6f335a7afa6bc57603f39430dc6f9e57de288a91 authored by Ben Skeggs on 29 March 2010, 00:06:09 UTC, committed by Ben Skeggs on 09 April 2010, 00:15:38 UTC
This value interacts with some registers we don't currently know how to program properly ourselves. The default of 5 that we were using matches what the VBIOS on early DP cards do, but later ones use 6, which would cause nouveau to program an incorrect mode on these chips. Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
1 parent d327dd4
sysctl_net_ax25.c
/*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* Copyright (C) 1996 Mike Shaver (shaver@zeroknowledge.com)
*/
#include <linux/mm.h>
#include <linux/sysctl.h>
#include <linux/spinlock.h>
#include <net/ax25.h>
static int min_ipdefmode[1], max_ipdefmode[] = {1};
static int min_axdefmode[1], max_axdefmode[] = {1};
static int min_backoff[1], max_backoff[] = {2};
static int min_conmode[1], max_conmode[] = {2};
static int min_window[] = {1}, max_window[] = {7};
static int min_ewindow[] = {1}, max_ewindow[] = {63};
static int min_t1[] = {1}, max_t1[] = {30000};
static int min_t2[] = {1}, max_t2[] = {20000};
static int min_t3[1], max_t3[] = {3600000};
static int min_idle[1], max_idle[] = {65535000};
static int min_n2[] = {1}, max_n2[] = {31};
static int min_paclen[] = {1}, max_paclen[] = {512};
static int min_proto[1], max_proto[] = { AX25_PROTO_MAX };
#ifdef CONFIG_AX25_DAMA_SLAVE
static int min_ds_timeout[1], max_ds_timeout[] = {65535000};
#endif
static struct ctl_table_header *ax25_table_header;
static ctl_table *ax25_table;
static int ax25_table_size;
static struct ctl_path ax25_path[] = {
{ .procname = "net", },
{ .procname = "ax25", },
{ }
};
static const ctl_table ax25_param_table[] = {
{
.procname = "ip_default_mode",
.maxlen = sizeof(int),
.mode = 0644,
.proc_handler = proc_dointvec_minmax,
.extra1 = &min_ipdefmode,
.extra2 = &max_ipdefmode
},
{
.procname = "ax25_default_mode",
.maxlen = sizeof(int),
.mode = 0644,
.proc_handler = proc_dointvec_minmax,
.extra1 = &min_axdefmode,
.extra2 = &max_axdefmode
},
{
.procname = "backoff_type",
.maxlen = sizeof(int),
.mode = 0644,
.proc_handler = proc_dointvec_minmax,
.extra1 = &min_backoff,
.extra2 = &max_backoff
},
{
.procname = "connect_mode",
.maxlen = sizeof(int),
.mode = 0644,
.proc_handler = proc_dointvec_minmax,
.extra1 = &min_conmode,
.extra2 = &max_conmode
},
{
.procname = "standard_window_size",
.maxlen = sizeof(int),
.mode = 0644,
.proc_handler = proc_dointvec_minmax,
.extra1 = &min_window,
.extra2 = &max_window
},
{
.procname = "extended_window_size",
.maxlen = sizeof(int),
.mode = 0644,
.proc_handler = proc_dointvec_minmax,
.extra1 = &min_ewindow,
.extra2 = &max_ewindow
},
{
.procname = "t1_timeout",
.maxlen = sizeof(int),
.mode = 0644,
.proc_handler = proc_dointvec_minmax,
.extra1 = &min_t1,
.extra2 = &max_t1
},
{
.procname = "t2_timeout",
.maxlen = sizeof(int),
.mode = 0644,
.proc_handler = proc_dointvec_minmax,
.extra1 = &min_t2,
.extra2 = &max_t2
},
{
.procname = "t3_timeout",
.maxlen = sizeof(int),
.mode = 0644,
.proc_handler = proc_dointvec_minmax,
.extra1 = &min_t3,
.extra2 = &max_t3
},
{
.procname = "idle_timeout",
.maxlen = sizeof(int),
.mode = 0644,
.proc_handler = proc_dointvec_minmax,
.extra1 = &min_idle,
.extra2 = &max_idle
},
{
.procname = "maximum_retry_count",
.maxlen = sizeof(int),
.mode = 0644,
.proc_handler = proc_dointvec_minmax,
.extra1 = &min_n2,
.extra2 = &max_n2
},
{
.procname = "maximum_packet_length",
.maxlen = sizeof(int),
.mode = 0644,
.proc_handler = proc_dointvec_minmax,
.extra1 = &min_paclen,
.extra2 = &max_paclen
},
{
.procname = "protocol",
.maxlen = sizeof(int),
.mode = 0644,
.proc_handler = proc_dointvec_minmax,
.extra1 = &min_proto,
.extra2 = &max_proto
},
#ifdef CONFIG_AX25_DAMA_SLAVE
{
.procname = "dama_slave_timeout",
.maxlen = sizeof(int),
.mode = 0644,
.proc_handler = proc_dointvec_minmax,
.extra1 = &min_ds_timeout,
.extra2 = &max_ds_timeout
},
#endif
{ } /* that's all, folks! */
};
void ax25_register_sysctl(void)
{
ax25_dev *ax25_dev;
int n, k;
spin_lock_bh(&ax25_dev_lock);
for (ax25_table_size = sizeof(ctl_table), ax25_dev = ax25_dev_list; ax25_dev != NULL; ax25_dev = ax25_dev->next)
ax25_table_size += sizeof(ctl_table);
if ((ax25_table = kzalloc(ax25_table_size, GFP_ATOMIC)) == NULL) {
spin_unlock_bh(&ax25_dev_lock);
return;
}
for (n = 0, ax25_dev = ax25_dev_list; ax25_dev != NULL; ax25_dev = ax25_dev->next) {
struct ctl_table *child = kmemdup(ax25_param_table,
sizeof(ax25_param_table),
GFP_ATOMIC);
if (!child) {
while (n--)
kfree(ax25_table[n].child);
kfree(ax25_table);
spin_unlock_bh(&ax25_dev_lock);
return;
}
ax25_table[n].child = ax25_dev->systable = child;
ax25_table[n].procname = ax25_dev->dev->name;
ax25_table[n].mode = 0555;
for (k = 0; k < AX25_MAX_VALUES; k++)
child[k].data = &ax25_dev->values[k];
n++;
}
spin_unlock_bh(&ax25_dev_lock);
ax25_table_header = register_sysctl_paths(ax25_path, ax25_table);
}
void ax25_unregister_sysctl(void)
{
ctl_table *p;
unregister_sysctl_table(ax25_table_header);
for (p = ax25_table; p->procname; p++)
kfree(p->child);
kfree(ax25_table);
}
![swh spinner](/static/img/swh-spinner.gif)
Computing file changes ...