Revision 720db5deeb852b61e40007989c1390295ceece32 authored by Fam Zheng on 01 June 2018, 09:26:40 UTC, committed by Michael Roth on 21 June 2018, 01:45:04 UTC
We don't verify the request range against s->size in the I/O callbacks except for raw_co_pwritev. This is inconsistent (especially for raw_co_pwrite_zeroes and raw_co_pdiscard), so fix them, in the meanwhile make the helper reusable by the coming new callbacks. Note that in most cases the block layer already verifies the request byte range against our reported image length, before invoking the driver callbacks. The exception is during image creating, after blk_set_allow_write_beyond_eof(blk, true) is called. But in that case, the requests are not directly from the user or guest. So there is no visible behavior change in adding the check code. The int64_t -> uint64_t inconsistency, as shown by the type casting, is pre-existing due to the interface. Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Fam Zheng <famz@redhat.com> Message-id: 20180601092648.24614-3-famz@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> (cherry picked from commit 384455385248762e74a080978f18f0c8f74757fe) Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
1 parent 979e7ea
qemu-img-cmds.hx
HXCOMM Keep the list of subcommands sorted by name.
HXCOMM Use DEFHEADING() to define headings in both help text and texi
HXCOMM Text between STEXI and ETEXI are copied to texi version and
HXCOMM discarded from C version
HXCOMM DEF(command, callback, arg_string) is used to construct
HXCOMM command structures and help message.
HXCOMM HXCOMM can be used for comments, discarded from both texi and C
STEXI
@table @option
ETEXI
DEF("amend", img_amend,
"amend [--object objectdef] [--image-opts] [-p] [-q] [-f fmt] [-t cache] -o options filename")
STEXI
@item amend [--object @var{objectdef}] [--image-opts] [-p] [-q] [-f @var{fmt}] [-t @var{cache}] -o @var{options} @var{filename}
ETEXI
DEF("bench", img_bench,
"bench [-c count] [-d depth] [-f fmt] [--flush-interval=flush_interval] [-n] [--no-drain] [-o offset] [--pattern=pattern] [-q] [-s buffer_size] [-S step_size] [-t cache] [-w] [-U] filename")
STEXI
@item bench [-c @var{count}] [-d @var{depth}] [-f @var{fmt}] [--flush-interval=@var{flush_interval}] [-n] [--no-drain] [-o @var{offset}] [--pattern=@var{pattern}] [-q] [-s @var{buffer_size}] [-S @var{step_size}] [-t @var{cache}] [-w] [-U] @var{filename}
ETEXI
DEF("check", img_check,
"check [-q] [--object objectdef] [--image-opts] [-f fmt] [--output=ofmt] [-r [leaks | all]] [-T src_cache] [-U] filename")
STEXI
@item check [--object @var{objectdef}] [--image-opts] [-q] [-f @var{fmt}] [--output=@var{ofmt}] [-r [leaks | all]] [-T @var{src_cache}] [-U] @var{filename}
ETEXI
DEF("commit", img_commit,
"commit [-q] [--object objectdef] [--image-opts] [-f fmt] [-t cache] [-b base] [-d] [-p] filename")
STEXI
@item commit [--object @var{objectdef}] [--image-opts] [-q] [-f @var{fmt}] [-t @var{cache}] [-b @var{base}] [-d] [-p] @var{filename}
ETEXI
DEF("compare", img_compare,
"compare [--object objectdef] [--image-opts] [-f fmt] [-F fmt] [-T src_cache] [-p] [-q] [-s] [-U] filename1 filename2")
STEXI
@item compare [--object @var{objectdef}] [--image-opts] [-f @var{fmt}] [-F @var{fmt}] [-T @var{src_cache}] [-p] [-q] [-s] [-U] @var{filename1} @var{filename2}
ETEXI
DEF("convert", img_convert,
"convert [--object objectdef] [--image-opts] [--target-image-opts] [-U] [-c] [-p] [-q] [-n] [-f fmt] [-t cache] [-T src_cache] [-O output_fmt] [-B backing_file] [-o options] [-s snapshot_id_or_name] [-l snapshot_param] [-S sparse_size] [-m num_coroutines] [-W] filename [filename2 [...]] output_filename")
STEXI
@item convert [--object @var{objectdef}] [--image-opts] [--target-image-opts] [-U] [-c] [-p] [-q] [-n] [-f @var{fmt}] [-t @var{cache}] [-T @var{src_cache}] [-O @var{output_fmt}] [-B @var{backing_file}] [-o @var{options}] [-s @var{snapshot_id_or_name}] [-l @var{snapshot_param}] [-S @var{sparse_size}] [-m @var{num_coroutines}] [-W] @var{filename} [@var{filename2} [...]] @var{output_filename}
ETEXI
DEF("create", img_create,
"create [-q] [--object objectdef] [-f fmt] [-b backing_file] [-F backing_fmt] [-u] [-o options] filename [size]")
STEXI
@item create [--object @var{objectdef}] [-q] [-f @var{fmt}] [-b @var{backing_file}] [-F @var{backing_fmt}] [-u] [-o @var{options}] @var{filename} [@var{size}]
ETEXI
DEF("dd", img_dd,
"dd [--image-opts] [-U] [-f fmt] [-O output_fmt] [bs=block_size] [count=blocks] [skip=blocks] if=input of=output")
STEXI
@item dd [--image-opts] [-U] [-f @var{fmt}] [-O @var{output_fmt}] [bs=@var{block_size}] [count=@var{blocks}] [skip=@var{blocks}] if=@var{input} of=@var{output}
ETEXI
DEF("info", img_info,
"info [--object objectdef] [--image-opts] [-f fmt] [--output=ofmt] [--backing-chain] [-U] filename")
STEXI
@item info [--object @var{objectdef}] [--image-opts] [-f @var{fmt}] [--output=@var{ofmt}] [--backing-chain] [-U] @var{filename}
ETEXI
DEF("map", img_map,
"map [--object objectdef] [--image-opts] [-f fmt] [--output=ofmt] [-U] filename")
STEXI
@item map [--object @var{objectdef}] [--image-opts] [-f @var{fmt}] [--output=@var{ofmt}] [-U] @var{filename}
ETEXI
DEF("measure", img_measure,
"measure [--output=ofmt] [-O output_fmt] [-o options] [--size N | [--object objectdef] [--image-opts] [-f fmt] [-l snapshot_param] filename]")
STEXI
@item measure [--output=@var{ofmt}] [-O @var{output_fmt}] [-o @var{options}] [--size @var{N} | [--object @var{objectdef}] [--image-opts] [-f @var{fmt}] [-l @var{snapshot_param}] @var{filename}]
ETEXI
DEF("snapshot", img_snapshot,
"snapshot [--object objectdef] [--image-opts] [-U] [-q] [-l | -a snapshot | -c snapshot | -d snapshot] filename")
STEXI
@item snapshot [--object @var{objectdef}] [--image-opts] [-U] [-q] [-l | -a @var{snapshot} | -c @var{snapshot} | -d @var{snapshot}] @var{filename}
ETEXI
DEF("rebase", img_rebase,
"rebase [--object objectdef] [--image-opts] [-U] [-q] [-f fmt] [-t cache] [-T src_cache] [-p] [-u] -b backing_file [-F backing_fmt] filename")
STEXI
@item rebase [--object @var{objectdef}] [--image-opts] [-U] [-q] [-f @var{fmt}] [-t @var{cache}] [-T @var{src_cache}] [-p] [-u] -b @var{backing_file} [-F @var{backing_fmt}] @var{filename}
ETEXI
DEF("resize", img_resize,
"resize [--object objectdef] [--image-opts] [-q] [--shrink] filename [+ | -]size")
STEXI
@item resize [--object @var{objectdef}] [--image-opts] [-q] [--shrink] @var{filename} [+ | -]@var{size}
ETEXI
STEXI
@end table
ETEXI
Computing file changes ...