| 73223e4 | zhong jiang | 18 August 2017, 22:16:24 UTC | mm/mempolicy: fix use after free when calling get_mempolicy I hit a use after free issue when executing trinity and repoduced it with KASAN enabled. The related call trace is as follows. BUG: KASan: use after free in SyS_get_mempolicy+0x3c8/0x960 at addr ffff8801f582d766 Read of size 2 by task syz-executor1/798 INFO: Allocated in mpol_new.part.2+0x74/0x160 age=3 cpu=1 pid=799 __slab_alloc+0x768/0x970 kmem_cache_alloc+0x2e7/0x450 mpol_new.part.2+0x74/0x160 mpol_new+0x66/0x80 SyS_mbind+0x267/0x9f0 system_call_fastpath+0x16/0x1b INFO: Freed in __mpol_put+0x2b/0x40 age=4 cpu=1 pid=799 __slab_free+0x495/0x8e0 kmem_cache_free+0x2f3/0x4c0 __mpol_put+0x2b/0x40 SyS_mbind+0x383/0x9f0 system_call_fastpath+0x16/0x1b INFO: Slab 0xffffea0009cb8dc0 objects=23 used=8 fp=0xffff8801f582de40 flags=0x200000000004080 INFO: Object 0xffff8801f582d760 @offset=5984 fp=0xffff8801f582d600 Bytes b4 ffff8801f582d750: ae 01 ff ff 00 00 00 00 5a 5a 5a 5a 5a 5a 5a 5a ........ZZZZZZZZ Object ffff8801f582d760: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b kkkkkkkkkkkkkkkk Object ffff8801f582d770: 6b 6b 6b 6b 6b 6b 6b a5 kkkkkkk. Redzone ffff8801f582d778: bb bb bb bb bb bb bb bb ........ Padding ffff8801f582d8b8: 5a 5a 5a 5a 5a 5a 5a 5a ZZZZZZZZ Memory state around the buggy address: ffff8801f582d600: fb fb fb fc fc fc fc fc fc fc fc fc fc fc fc fc ffff8801f582d680: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc >ffff8801f582d700: fc fc fc fc fc fc fc fc fc fc fc fc fb fb fb fc !shared memory policy is not protected against parallel removal by other thread which is normally protected by the mmap_sem. do_get_mempolicy, however, drops the lock midway while we can still access it later. Early premature up_read is a historical artifact from times when put_user was called in this path see https://lwn.net/Articles/124754/ but that is gone since 8bccd85ffbaf ("[PATCH] Implement sys_* do_* layering in the memory policy layer."). but when we have the the current mempolicy ref count model. The issue was introduced accordingly. Fix the issue by removing the premature release. Link: http://lkml.kernel.org/r/1502950924-27521-1-git-send-email-zhongjiang@huawei.com Signed-off-by: zhong jiang <zhongjiang@huawei.com> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: David Rientjes <rientjes@google.com> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: <stable@vger.kernel.org> [2.6+] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 18 August 2017, 22:32:02 UTC |
| da094e4 | Prakash Gupta | 18 August 2017, 22:16:21 UTC | mm/cma_debug.c: fix stack corruption due to sprintf usage name[] in cma_debugfs_add_one() can only accommodate 16 chars including NULL to store sprintf output. It's common for cma device name to be larger than 15 chars. This can cause stack corrpution. If the gcc stack protector is turned on, this can cause a panic due to stack corruption. Below is one example trace: Kernel panic - not syncing: stack-protector: Kernel stack is corrupted in: ffffff8e69a75730 Call trace: dump_backtrace+0x0/0x2c4 show_stack+0x20/0x28 dump_stack+0xb8/0xf4 panic+0x154/0x2b0 print_tainted+0x0/0xc0 cma_debugfs_init+0x274/0x290 do_one_initcall+0x5c/0x168 kernel_init_freeable+0x1c8/0x280 Fix the short sprintf buffer in cma_debugfs_add_one() by using scnprintf() instead of sprintf(). Link: http://lkml.kernel.org/r/1502446217-21840-1-git-send-email-guptap@codeaurora.org Fixes: f318dd083c81 ("cma: Store a name in the cma structure") Signed-off-by: Prakash Gupta <guptap@codeaurora.org> Acked-by: Laura Abbott <labbott@redhat.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 18 August 2017, 22:32:02 UTC |
| eb61b59 | Jamie Iles | 18 August 2017, 22:16:18 UTC | signal: don't remove SIGNAL_UNKILLABLE for traced tasks. When forcing a signal, SIGNAL_UNKILLABLE is removed to prevent recursive faults, but this is undesirable when tracing. For example, debugging an init process (whether global or namespace), hitting a breakpoint and SIGTRAP will force SIGTRAP and then remove SIGNAL_UNKILLABLE. Everything continues fine, but then once debugging has finished, the init process is left killable which is unlikely what the user expects, resulting in either an accidentally killed init or an init that stops reaping zombies. Link: http://lkml.kernel.org/r/20170815112806.10728-1-jamie.iles@oracle.com Signed-off-by: Jamie Iles <jamie.iles@oracle.com> Acked-by: Oleg Nesterov <oleg@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 18 August 2017, 22:32:02 UTC |
| 6b31d59 | Michal Hocko | 18 August 2017, 22:16:15 UTC | mm, oom: fix potential data corruption when oom_reaper races with writer Wenwei Tao has noticed that our current assumption that the oom victim is dying and never doing any visible changes after it dies, and so the oom_reaper can tear it down, is not entirely true. __task_will_free_mem consider a task dying when SIGNAL_GROUP_EXIT is set but do_group_exit sends SIGKILL to all threads _after_ the flag is set. So there is a race window when some threads won't have fatal_signal_pending while the oom_reaper could start unmapping the address space. Moreover some paths might not check for fatal signals before each PF/g-u-p/copy_from_user. We already have a protection for oom_reaper vs. PF races by checking MMF_UNSTABLE. This has been, however, checked only for kernel threads (use_mm users) which can outlive the oom victim. A simple fix would be to extend the current check in handle_mm_fault for all tasks but that wouldn't be sufficient because the current check assumes that a kernel thread would bail out after EFAULT from get_user*/copy_from_user and never re-read the same address which would succeed because the PF path has established page tables already. This seems to be the case for the only existing use_mm user currently (virtio driver) but it is rather fragile in general. This is even more fragile in general for more complex paths such as generic_perform_write which can re-read the same address more times (e.g. iov_iter_copy_from_user_atomic to fail and then iov_iter_fault_in_readable on retry). Therefore we have to implement MMF_UNSTABLE protection in a robust way and never make a potentially corrupted content visible. That requires to hook deeper into the PF path and check for the flag _every time_ before a pte for anonymous memory is established (that means all !VM_SHARED mappings). The corruption can be triggered artificially (http://lkml.kernel.org/r/201708040646.v746kkhC024636@www262.sakura.ne.jp) but there doesn't seem to be any real life bug report. The race window should be quite tight to trigger most of the time. Link: http://lkml.kernel.org/r/20170807113839.16695-3-mhocko@kernel.org Fixes: aac453635549 ("mm, oom: introduce oom reaper") Signed-off-by: Michal Hocko <mhocko@suse.com> Reported-by: Wenwei Tao <wenwei.tww@alibaba-inc.com> Tested-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Cc: "Kirill A. Shutemov" <kirill@shutemov.name> Cc: Andrea Argangeli <andrea@kernel.org> Cc: David Rientjes <rientjes@google.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Tetsuo Handa <penguin-kernel@i-love.sakura.ne.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 18 August 2017, 22:32:01 UTC |
| 5b53a6e | Michal Hocko | 18 August 2017, 22:16:12 UTC | mm: fix double mmap_sem unlock on MMF_UNSTABLE enforced SIGBUS Tetsuo Handa has noticed that MMF_UNSTABLE SIGBUS path in handle_mm_fault causes a lockdep splat Out of memory: Kill process 1056 (a.out) score 603 or sacrifice child Killed process 1056 (a.out) total-vm:4268108kB, anon-rss:2246048kB, file-rss:0kB, shmem-rss:0kB a.out (1169) used greatest stack depth: 11664 bytes left DEBUG_LOCKS_WARN_ON(depth <= 0) ------------[ cut here ]------------ WARNING: CPU: 6 PID: 1339 at kernel/locking/lockdep.c:3617 lock_release+0x172/0x1e0 CPU: 6 PID: 1339 Comm: a.out Not tainted 4.13.0-rc3-next-20170803+ #142 Hardware name: VMware, Inc. VMware Virtual Platform/440BX Desktop Reference Platform, BIOS 6.00 07/02/2015 RIP: 0010:lock_release+0x172/0x1e0 Call Trace: up_read+0x1a/0x40 __do_page_fault+0x28e/0x4c0 do_page_fault+0x30/0x80 page_fault+0x28/0x30 The reason is that the page fault path might have dropped the mmap_sem and returned with VM_FAULT_RETRY. MMF_UNSTABLE check however rewrites the error path to VM_FAULT_SIGBUS and we always expect mmap_sem taken in that path. Fix this by taking mmap_sem when VM_FAULT_RETRY is held in the MMF_UNSTABLE path. We cannot simply add VM_FAULT_SIGBUS to the existing error code because all arch specific page fault handlers and g-u-p would have to learn a new error code combination. Link: http://lkml.kernel.org/r/20170807113839.16695-2-mhocko@kernel.org Fixes: 3f70dc38cec2 ("mm: make sure that kthreads will not refault oom reaped memory") Reported-by: Tetsuo Handa <penguin-kernel@i-love.sakura.ne.jp> Signed-off-by: Michal Hocko <mhocko@suse.com> Acked-by: David Rientjes <rientjes@google.com> Cc: Andrea Argangeli <andrea@kernel.org> Cc: "Kirill A. Shutemov" <kirill@shutemov.name> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Wenwei Tao <wenwei.tww@alibaba-inc.com> Cc: <stable@vger.kernel.org> [4.9+] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 18 August 2017, 22:32:01 UTC |
| f6ba488 | Vladimir Davydov | 18 August 2017, 22:16:08 UTC | slub: fix per memcg cache leak on css offline To avoid a possible deadlock, sysfs_slab_remove() schedules an asynchronous work to delete sysfs entries corresponding to the kmem cache. To ensure the cache isn't freed before the work function is called, it takes a reference to the cache kobject. The reference is supposed to be released by the work function. However, the work function (sysfs_slab_remove_workfn()) does nothing in case the cache sysfs entry has already been deleted, leaking the kobject and the corresponding cache. This may happen on a per memcg cache destruction, because sysfs entries of a per memcg cache are deleted on memcg offline if the cache is empty (see __kmemcg_cache_deactivate()). The kmemleak report looks like this: unreferenced object 0xffff9f798a79f540 (size 32): comm "kworker/1:4", pid 15416, jiffies 4307432429 (age 28687.554s) hex dump (first 32 bytes): 6b 6d 61 6c 6c 6f 63 2d 31 36 28 31 35 39 39 3a kmalloc-16(1599: 6e 65 77 72 6f 6f 74 29 00 23 6b c0 ff ff ff ff newroot).#k..... backtrace: kmemleak_alloc+0x4a/0xa0 __kmalloc_track_caller+0x148/0x2c0 kvasprintf+0x66/0xd0 kasprintf+0x49/0x70 memcg_create_kmem_cache+0xe6/0x160 memcg_kmem_cache_create_func+0x20/0x110 process_one_work+0x205/0x5d0 worker_thread+0x4e/0x3a0 kthread+0x109/0x140 ret_from_fork+0x2a/0x40 unreferenced object 0xffff9f79b6136840 (size 416): comm "kworker/1:4", pid 15416, jiffies 4307432429 (age 28687.573s) hex dump (first 32 bytes): 40 fb 80 c2 3e 33 00 00 00 00 00 40 00 00 00 00 @...>3.....@.... 00 00 00 00 00 00 00 00 10 00 00 00 10 00 00 00 ................ backtrace: kmemleak_alloc+0x4a/0xa0 kmem_cache_alloc+0x128/0x280 create_cache+0x3b/0x1e0 memcg_create_kmem_cache+0x118/0x160 memcg_kmem_cache_create_func+0x20/0x110 process_one_work+0x205/0x5d0 worker_thread+0x4e/0x3a0 kthread+0x109/0x140 ret_from_fork+0x2a/0x40 Fix the leak by adding the missing call to kobject_put() to sysfs_slab_remove_workfn(). Link: http://lkml.kernel.org/r/20170812181134.25027-1-vdavydov.dev@gmail.com Fixes: 3b7b314053d02 ("slub: make sysfs file removal asynchronous") Signed-off-by: Vladimir Davydov <vdavydov.dev@gmail.com> Reported-by: Andrei Vagin <avagin@gmail.com> Tested-by: Andrei Vagin <avagin@gmail.com> Acked-by: Tejun Heo <tj@kernel.org> Acked-by: David Rientjes <rientjes@google.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Christoph Lameter <cl@linux.com> Cc: Pekka Enberg <penberg@kernel.org> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: <stable@vger.kernel.org> [4.12.x] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 18 August 2017, 22:32:01 UTC |
| 3010f87 | Pavel Tatashin | 18 August 2017, 22:16:05 UTC | mm: discard memblock data later There is existing use after free bug when deferred struct pages are enabled: The memblock_add() allocates memory for the memory array if more than 128 entries are needed. See comment in e820__memblock_setup(): * The bootstrap memblock region count maximum is 128 entries * (INIT_MEMBLOCK_REGIONS), but EFI might pass us more E820 entries * than that - so allow memblock resizing. This memblock memory is freed here: free_low_memory_core_early() We access the freed memblock.memory later in boot when deferred pages are initialized in this path: deferred_init_memmap() for_each_mem_pfn_range() __next_mem_pfn_range() type = &memblock.memory; One possible explanation for why this use-after-free hasn't been hit before is that the limit of INIT_MEMBLOCK_REGIONS has never been exceeded at least on systems where deferred struct pages were enabled. Tested by reducing INIT_MEMBLOCK_REGIONS down to 4 from the current 128, and verifying in qemu that this code is getting excuted and that the freed pages are sane. Link: http://lkml.kernel.org/r/1502485554-318703-2-git-send-email-pasha.tatashin@oracle.com Fixes: 7e18adb4f80b ("mm: meminit: initialise remaining struct pages in parallel with kswapd") Signed-off-by: Pavel Tatashin <pasha.tatashin@oracle.com> Reviewed-by: Steven Sistare <steven.sistare@oracle.com> Reviewed-by: Daniel Jordan <daniel.m.jordan@oracle.com> Reviewed-by: Bob Picco <bob.picco@oracle.com> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 18 August 2017, 22:32:01 UTC |
| 768dc4e | Luis R. Rodriguez | 18 August 2017, 22:16:02 UTC | test_kmod: fix description for -s -and -c parameters The descriptions were reversed, correct this. Link: http://lkml.kernel.org/r/20170809234635.13443-4-mcgrof@kernel.org Fixes: 64b671204afd71 ("test_sysctl: add generic script to expand on tests") Signed-off-by: Luis R. Rodriguez <mcgrof@kernel.org> Reported-by: Daniel Mentz <danielmentz@google.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Colin Ian King <colin.king@canonical.com> Cc: Dan Carpenter <dan.carpenter@oracle.com> Cc: David Binderman <dcb314@hotmail.com> Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jessica Yu <jeyu@redhat.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Kees Cook <keescook@chromium.org> Cc: Matt Redfearn <matt.redfearn@imgetc.com> Cc: Matt Redfearn <matt.redfearn@imgtec.com> Cc: Michal Marek <mmarek@suse.com> Cc: Miroslav Benes <mbenes@suse.cz> Cc: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Petr Mladek <pmladek@suse.com> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Shuah Khan <shuah@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 18 August 2017, 22:32:01 UTC |
| 2ba293c | Luis R. Rodriguez | 18 August 2017, 22:15:58 UTC | kmod: fix wait on recursive loop Recursive loops with module loading were previously handled in kmod by restricting the number of modprobe calls to 50 and if that limit was breached request_module() would return an error and a user would see the following on their kernel dmesg: request_module: runaway loop modprobe binfmt-464c Starting init:/sbin/init exists but couldn't execute it (error -8) This issue could happen for instance when a 64-bit kernel boots a 32-bit userspace on some architectures and has no 32-bit binary format hanlders. This is visible, for instance, when a CONFIG_MODULES enabled 64-bit MIPS kernel boots a into o32 root filesystem and the binfmt handler for o32 binaries is not built-in. After commit 6d7964a722af ("kmod: throttle kmod thread limit") we now don't have any visible signs of an error and the kernel just waits for the loop to end somehow. Although this *particular* recursive loop could also be addressed by doing a sanity check on search_binary_handler() and disallowing a modular binfmt to be required for modprobe, a generic solution for any recursive kernel kmod issues is still needed. This should catch these loops. We can investigate each loop and address each one separately as they come in, this however puts a stop gap for them as before. Link: http://lkml.kernel.org/r/20170809234635.13443-3-mcgrof@kernel.org Fixes: 6d7964a722af ("kmod: throttle kmod thread limit") Signed-off-by: Luis R. Rodriguez <mcgrof@kernel.org> Reported-by: Matt Redfearn <matt.redfearn@imgtec.com> Tested-by: Matt Redfearn <matt.redfearn@imgetc.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Colin Ian King <colin.king@canonical.com> Cc: Dan Carpenter <dan.carpenter@oracle.com> Cc: Daniel Mentz <danielmentz@google.com> Cc: David Binderman <dcb314@hotmail.com> Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jessica Yu <jeyu@redhat.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Kees Cook <keescook@chromium.org> Cc: Michal Marek <mmarek@suse.com> Cc: Miroslav Benes <mbenes@suse.cz> Cc: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Petr Mladek <pmladek@suse.com> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Shuah Khan <shuah@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 18 August 2017, 22:32:01 UTC |
| 8ada927 | Luis R. Rodriguez | 18 August 2017, 22:15:55 UTC | wait: add wait_event_killable_timeout() These are the few pending fixes I have queued up for v4.13-final. One is a a generic regression fix for recursive loops on kmod and the other one is a trivial print out correction. During the v4.13 development we assumed that recursive kmod loops were no longer possible. Clearly that is not true. The regression fix makes use of a new killable wait. We use a killable wait to be paranoid in how signals might be sent to modprobe and only accept a proper SIGKILL. The signal will only be available to userspace to issue *iff* a thread has already entered a wait state, and that happens only if we've already throttled after 50 kmod threads have been hit. Note that although it may seem excessive to trigger a failure afer 5 seconds if all kmod thread remain busy, prior to the series of changes that went into v4.13 we would actually *always* fatally fail any request which came in if the limit was already reached. The new waiting implemented in v4.13 actually gives us *more* breathing room -- the wait for 5 seconds is a wait for *any* kmod thread to finish. We give up and fail *iff* no kmod thread has finished and they're *all* running straight for 5 consecutive seconds. If 50 kmod threads are running consecutively for 5 seconds something else must be really bad. Recursive loops with kmod are bad but they're also hard to implement properly as a selftest without currently fooling current userspace tools like kmod [1]. For instance kmod will complain when you run depmod if it finds a recursive loop with symbol dependency between modules as such this type of recursive loop cannot go upstream as the modules_install target will fail after running depmod. These tests already exist on userspace kmod upstream though (refer to the testsuite/module-playground/mod-loop-*.c files). The same is not true if request_module() is used though, or worst if aliases are used. Likewise the issue with 64-bit kernels booting 32-bit userspace without a binfmt handler built-in is also currently not detected and proactively avoided by userspace kmod tools, or kconfig for all architectures. Although we could complain in the kernel when some of these individual recursive issues creep up, proactively avoiding these situations in userspace at build time is what we should keep striving for. Lastly, since recursive loops could happen with kmod it may mean recursive loops may also be possible with other kernel usermode helpers, this should be investigated and long term if we can come up with a more sensible generic solution even better! [0] https://git.kernel.org/pub/scm/linux/kernel/git/mcgrof/linux.git/log/?h=20170809-kmod-for-v4.13-final [1] https://git.kernel.org/pub/scm/utils/kernel/kmod/kmod.git This patch (of 3): This wait is similar to wait_event_interruptible_timeout() but only accepts SIGKILL interrupt signal. Other signals are ignored. Link: http://lkml.kernel.org/r/20170809234635.13443-2-mcgrof@kernel.org Signed-off-by: Luis R. Rodriguez <mcgrof@kernel.org> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Kees Cook <keescook@chromium.org> Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com> Cc: Jessica Yu <jeyu@redhat.com> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Michal Marek <mmarek@suse.com> Cc: Petr Mladek <pmladek@suse.com> Cc: Miroslav Benes <mbenes@suse.cz> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Shuah Khan <shuah@kernel.org> Cc: Matt Redfearn <matt.redfearn@imgtec.com> Cc: Dan Carpenter <dan.carpenter@oracle.com> Cc: Colin Ian King <colin.king@canonical.com> Cc: Daniel Mentz <danielmentz@google.com> Cc: David Binderman <dcb314@hotmail.com> Cc: Matt Redfearn <matt.redfearn@imgetc.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 18 August 2017, 22:32:01 UTC |
| 92e5aae | Nicholas Piggin | 18 August 2017, 22:15:51 UTC | kernel/watchdog: fix Kconfig constraints for perf hardlockup watchdog Commit 05a4a9527931 ("kernel/watchdog: split up config options") lost the perf-based hardlockup detector's dependency on PERF_EVENTS, which can result in broken builds with some powerpc configurations. Restore the dependency. Add it in for x86 too, despite x86 always selecting PERF_EVENTS it seems reasonable to make the dependency explicit. Link: http://lkml.kernel.org/r/20170810114452.6673-1-npiggin@gmail.com Fixes: 05a4a9527931 ("kernel/watchdog: split up config options") Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Acked-by: Don Zickus <dzickus@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 18 August 2017, 22:32:01 UTC |
| 739f79f | Johannes Weiner | 18 August 2017, 22:15:48 UTC | mm: memcontrol: fix NULL pointer crash in test_clear_page_writeback() Jaegeuk and Brad report a NULL pointer crash when writeback ending tries to update the memcg stats: BUG: unable to handle kernel NULL pointer dereference at 00000000000003b0 IP: test_clear_page_writeback+0x12e/0x2c0 [...] RIP: 0010:test_clear_page_writeback+0x12e/0x2c0 Call Trace: <IRQ> end_page_writeback+0x47/0x70 f2fs_write_end_io+0x76/0x180 [f2fs] bio_endio+0x9f/0x120 blk_update_request+0xa8/0x2f0 scsi_end_request+0x39/0x1d0 scsi_io_completion+0x211/0x690 scsi_finish_command+0xd9/0x120 scsi_softirq_done+0x127/0x150 __blk_mq_complete_request_remote+0x13/0x20 flush_smp_call_function_queue+0x56/0x110 generic_smp_call_function_single_interrupt+0x13/0x30 smp_call_function_single_interrupt+0x27/0x40 call_function_single_interrupt+0x89/0x90 RIP: 0010:native_safe_halt+0x6/0x10 (gdb) l *(test_clear_page_writeback+0x12e) 0xffffffff811bae3e is in test_clear_page_writeback (./include/linux/memcontrol.h:619). 614 mod_node_page_state(page_pgdat(page), idx, val); 615 if (mem_cgroup_disabled() || !page->mem_cgroup) 616 return; 617 mod_memcg_state(page->mem_cgroup, idx, val); 618 pn = page->mem_cgroup->nodeinfo[page_to_nid(page)]; 619 this_cpu_add(pn->lruvec_stat->count[idx], val); 620 } 621 622 unsigned long mem_cgroup_soft_limit_reclaim(pg_data_t *pgdat, int order, 623 gfp_t gfp_mask, The issue is that writeback doesn't hold a page reference and the page might get freed after PG_writeback is cleared (and the mapping is unlocked) in test_clear_page_writeback(). The stat functions looking up the page's node or zone are safe, as those attributes are static across allocation and free cycles. But page->mem_cgroup is not, and it will get cleared if we race with truncation or migration. It appears this race window has been around for a while, but less likely to trigger when the memcg stats were updated first thing after PG_writeback is cleared. Recent changes reshuffled this code to update the global node stats before the memcg ones, though, stretching the race window out to an extent where people can reproduce the problem. Update test_clear_page_writeback() to look up and pin page->mem_cgroup before clearing PG_writeback, then not use that pointer afterward. It is a partial revert of 62cccb8c8e7a ("mm: simplify lock_page_memcg()") but leaves the pageref-holding callsites that aren't affected alone. Link: http://lkml.kernel.org/r/20170809183825.GA26387@cmpxchg.org Fixes: 62cccb8c8e7a ("mm: simplify lock_page_memcg()") Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Reported-by: Jaegeuk Kim <jaegeuk@kernel.org> Tested-by: Jaegeuk Kim <jaegeuk@kernel.org> Reported-by: Bradley Bolen <bradleybolen@gmail.com> Tested-by: Brad Bolen <bradleybolen@gmail.com> Cc: Vladimir Davydov <vdavydov@virtuozzo.com> Cc: Michal Hocko <mhocko@suse.cz> Cc: <stable@vger.kernel.org> [4.6+] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 18 August 2017, 22:32:01 UTC |
| 039a8e3 | Linus Torvalds | 18 August 2017, 18:11:03 UTC | Merge tag 'powerpc-4.13-7' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull powerpc fixes from Michael Ellerman: "A bug in the VSX register saving that could cause userspace FP/VMX register corruption. Never seen to happen (that we know of), was found by code inspection, but still tagged for stable given the consequences" * tag 'powerpc-4.13-7' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: powerpc: Fix VSX enabling/flushing to also test MSR_FP and MSR_VEC | 18 August 2017, 18:11:03 UTC |
| 4283346 | Linus Torvalds | 18 August 2017, 18:08:48 UTC | Merge tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC fixes from Arnd Bergmann: "A small number of bugfixes, nothing serious this time. Here is a full list. 4.13 regression fix: - imx7d-sdb pinctrl support regressed in 4.13 due to an incomplete patch DT fixes for recently added devices: - badly copied DT entries on imx6qdl-nitrogen6_som broke PCI reset - sama5d2 memory controller had the wrong ID and registers - imx7 power domains did not work correctly with deferred probing (driver added in 4.12) - Allwinner H5 pinctrl (added in 4.12) did not work right with GPIO interrupts Fixes for older bugs that just got noticed: - i.MX25 ADC support (added in 4.6) apparently never worked right due to a missing 'ranges' property in DT. - Renesas Salvador Audio support (added in v4.5) was broken for device repeated bind/unbind due to a naming conflict. - Various allwinner boards are missing an 'ethernet' alias in DT, leading to unstable device naming. Preventive bugfix: - TI Keystone needs a fix to prevent a NULL pointer dereference with an upcoming PM change" * tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: soc: ti: ti_sci_pm_domains: Populate name for genpd ARM: dts: imx6qdl-nitrogen6_som2: fix PCIe reset arm64: allwinner: h5: fix pinctrl IRQs arm64: allwinner: a64: sopine: add missing ethernet0 alias arm64: allwinner: a64: pine64: add missing ethernet0 alias arm64: allwinner: a64: bananapi-m64: add missing ethernet0 alias arm64: renesas: salvator-common: avoid audio_clkout naming conflict ARM: dts: i.MX25: add ranges to tscadc soc: imx: gpcv2: fix regulator deferred probe ARM: dts: at91: sama5d2: fix EBI/NAND controllers declaration ARM: dts: at91: sama5d2: use sama5d2 compatible string for SMC ARM: dts: imx7d-sdb: Put pinctrl_spi4 in the correct location | 18 August 2017, 18:08:48 UTC |
| cb24785 | Linus Torvalds | 18 August 2017, 18:02:49 UTC | Merge tag 'sound-4.13-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound Pull sound fixes from Takashi Iwai: "A collection of small fixes, mostly for regression fixes (sequencer kconfig and emu10k1 probe) and device-specific quirks (three for USB and one for HD-audio). One significant change is a fix for races in ALSA sequencer core, which covers over the previous incomplete fix" * tag 'sound-4.13-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: ALSA: emu10k1: Fix forgotten user-copy conversion in init code ALSA: usb-audio: add DSD support for new Amanero PID ALSA: usb-audio: Add mute TLV for playback volumes on C-Media devices ALSA: usb-audio: Apply sample rate quirk to Sennheiser headset ALSA: seq: 2nd attempt at fixing race creating a queue ALSA: hda/realtek - Fix pincfg for Dell XPS 13 9370 ALSA: seq: Fix CONFIG_SND_SEQ_MIDI dependency | 18 August 2017, 18:02:49 UTC |
| 4478976 | Linus Torvalds | 18 August 2017, 17:51:30 UTC | Merge tag 'dma-mapping-4.13-3' of git://git.infradead.org/users/hch/dma-mapping Pull dma-mapping fix from Christoph Hellwig: "Another dma-mapping regression fix" * tag 'dma-mapping-4.13-3' of git://git.infradead.org/users/hch/dma-mapping: of: fix DMA mask generation | 18 August 2017, 17:51:30 UTC |
| 4dd6a99 | Dave Gerlach | 28 July 2017, 16:51:34 UTC | soc: ti: ti_sci_pm_domains: Populate name for genpd Commit b6a1d093f96b ("PM / Domains: Extend generic power domain debugfs") now creates a debugfs directory for each genpd based on the name of the genpd. Currently no name is given to the genpd created by ti_sci_pm_domains driver so because of this we see a NULL pointer dereferences when it is accessed on boot when the debugfs entry creation is attempted. Give the genpd a name before registering it to avoid this. Fixes: 52835d59fc6c ("soc: ti: Add ti_sci_pm_domains driver") Signed-off-by: Dave Gerlach <d-gerlach@ti.com> Signed-off-by: Santosh Shilimkar <ssantosh@kernel.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de> | 18 August 2017, 09:59:53 UTC |
| 9311248 | Arnd Bergmann | 18 August 2017, 09:58:38 UTC | Merge tag 'imx-fixes-4.13-3' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into fixes Pull "i.MX fixes for 4.13, round 3" from Shawn Guo: - Fix PCIe reset GPIO of imx6qdl-nitrogen6_som2 board, which was a bad copy from nitrogen6_max device tree. * tag 'imx-fixes-4.13-3' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: ARM: dts: imx6qdl-nitrogen6_som2: fix PCIe reset | 18 August 2017, 09:58:38 UTC |
| 552c497 | Arnd Bergmann | 18 August 2017, 09:55:44 UTC | Merge tag 'sunxi-fixes-for-4.13-2' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into fixes Pull "Allwinner fixes for 4.13, round 2" from Chen-Yu Tsai: Three fixes adding a missing alias for the Ethernet controller on A64 boards. One adding a missing interrupt for the pin controller. * tag 'sunxi-fixes-for-4.13-2' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux: arm64: allwinner: h5: fix pinctrl IRQs arm64: allwinner: a64: sopine: add missing ethernet0 alias arm64: allwinner: a64: pine64: add missing ethernet0 alias arm64: allwinner: a64: bananapi-m64: add missing ethernet0 alias | 18 August 2017, 09:55:44 UTC |
| 0b36f2b | Takashi Iwai | 18 August 2017, 08:55:10 UTC | ALSA: emu10k1: Fix forgotten user-copy conversion in init code The commit d42fe63d5839 ("ALSA: emu10k1: Get rid of set_fs() usage") converted the user-space copy hack with set_fs() to the direct memcpy(), but one place was forgotten. This resulted in the error from snd_emu10k1_init_efx(), eventually failed to load the driver. Fix the missing piece. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=196687 Fixes: d42fe63d5839 ("ALSA: emu10k1: Get rid of set_fs() usage") Signed-off-by: Takashi Iwai <tiwai@suse.de> | 18 August 2017, 08:59:02 UTC |
| ed993c6 | Jussi Laako | 18 August 2017, 07:42:14 UTC | ALSA: usb-audio: add DSD support for new Amanero PID Add DSD support for new Amanero Combo384 firmware version with a new PID. This firmware uses DSD_U32_BE. Fixes: 3eff682d765b ("ALSA: usb-audio: Support both DSD LE/BE Amanero firmware versions") Signed-off-by: Jussi Laako <jussi@sonarnerd.net> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de> | 18 August 2017, 08:13:21 UTC |
| c40bc54 | Gary Bisson | 17 August 2017, 13:50:10 UTC | ARM: dts: imx6qdl-nitrogen6_som2: fix PCIe reset Previous value was a bad copy of nitrogen6_max device tree. Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com> Fixes: 3faa1bb2e89c ("ARM: dts: imx: add Boundary Devices Nitrogen6_SOM2 support") Cc: <stable@vger.kernel.org> Signed-off-by: Shawn Guo <shawnguo@kernel.org> | 18 August 2017, 01:40:40 UTC |
| 04d49f3 | Linus Torvalds | 17 August 2017, 23:48:29 UTC | Merge tag 'drm-fixes-for-v4.13-rc6' of git://people.freedesktop.org/~airlied/linux Pull drm fixes from Dave Airlie: "Seems to be slowing down nicely, just one amdgpu fix, and a bunch of i915 fixes" * tag 'drm-fixes-for-v4.13-rc6' of git://people.freedesktop.org/~airlied/linux: drm/amdgpu: save list length when fence is signaled drm/i915: Avoid the gpu reset vs. modeset deadlock drm/i915: Suppress switch_mm emission between the same aliasing_ppgtt drm/i915: Return correct EDP voltage swing table for 0.85V drm/i915/cnl: Add slice and subslice information to debugfs. drm/i915: Perform an invalidate prior to executing golden renderstate drm/i915: remove unused function declaration | 17 August 2017, 23:48:29 UTC |
| d33a2a9 | Linus Torvalds | 17 August 2017, 21:21:18 UTC | Merge tag 'pm-4.13-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull power management fixes from Rafael Wysocki: "These fix two issues related to exposing the current CPU frequency to user space on x86. Specifics: - Disable interrupts around reading IA32_APERF and IA32_MPERF in aperfmperf_snapshot_khz() (introduced recently) to avoid excessive delays between the reads that may result from interrupt handling (Doug Smythies). - Fix the computation of the CPU frequency to be reported through the pstate_sample tracepoint in intel_pstate (Doug Smythies)" * tag 'pm-4.13-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: cpufreq: x86: Disable interrupts during MSRs reading cpufreq: intel_pstate: report correct CPU frequencies during trace | 17 August 2017, 21:21:18 UTC |
| 440105d | Linus Torvalds | 17 August 2017, 20:45:44 UTC | Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Pull input fixes from Dmitry Torokhov. * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: elan_i2c - Add antoher Lenovo ACPI ID for upcoming Lenovo NB Input: elan_i2c - add ELAN0608 to the ACPI table Input: trackpoint - assume 3 buttons when buttons detection fails | 17 August 2017, 20:45:44 UTC |
| 28eb462 | Dave Airlie | 17 August 2017, 19:45:03 UTC | Merge branch 'drm-fixes-4.13' of git://people.freedesktop.org/~agd5f/linux into drm-fixes single amdgpu fix. * 'drm-fixes-4.13' of git://people.freedesktop.org/~agd5f/linux: drm/amdgpu: save list length when fence is signaled | 17 August 2017, 19:45:03 UTC |
| 41d31b5 | Dave Airlie | 17 August 2017, 19:43:10 UTC | Merge tag 'drm-intel-fixes-2017-08-16' of git://anongit.freedesktop.org/git/drm-intel into drm-fixes drm/i915 fixes for v4.13-rc6 "Chris' "drm/i915: Perform an invalidate prior to executing golden renderstate" and Daniel's "drm/i915: Avoid the gpu reset vs. modeset deadlock" seem like the most important ones. * tag 'drm-intel-fixes-2017-08-16' of git://anongit.freedesktop.org/git/drm-intel: drm/i915: Avoid the gpu reset vs. modeset deadlock drm/i915: Suppress switch_mm emission between the same aliasing_ppgtt drm/i915: Return correct EDP voltage swing table for 0.85V drm/i915/cnl: Add slice and subslice information to debugfs. drm/i915: Perform an invalidate prior to executing golden renderstate drm/i915: remove unused function declaration | 17 August 2017, 19:43:10 UTC |
| 8179962 | Rafael J. Wysocki | 17 August 2017, 19:00:30 UTC | Merge branches 'intel_pstate-fix' and 'cpufreq-x86-fix' * intel_pstate-fix: cpufreq: intel_pstate: report correct CPU frequencies during trace * cpufreq-x86-fix: cpufreq: x86: Disable interrupts during MSRs reading | 17 August 2017, 19:00:30 UTC |
| 3bc6c90 | Linus Torvalds | 17 August 2017, 18:39:54 UTC | Merge branch 'parisc-4.13-5' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux Pull parisc fixes from Helge Deller: - Fix PCI memory bar assignments with 64-bit kernels on machines with Dino/Cujo PCI chipsets. This makes PCI graphic cards work on such machines (from Thomas Bogendoerfer). - Fix documentation to be more clear about the difference between %pF and %pS printk format usage. There are still many places in the kernel which have it wrong (from Petr Mladek, Sergey Senozhatsky & me). * 'parisc-4.13-5' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux: printk-formats.txt: Better describe the difference between %pS and %pF parisc: pci memory bar assignment fails with 64bit kernels on dino/cujo | 17 August 2017, 18:39:54 UTC |
| 99f781b | Linus Torvalds | 17 August 2017, 16:26:10 UTC | Merge branch 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs Pull quota fix from Jan Kara: "A fix of a check for quota limit" * 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs: quota: correct space limit check | 17 August 2017, 16:26:10 UTC |
| c8c03f1 | Linus Torvalds | 17 August 2017, 00:08:07 UTC | pty: fix the cached path of the pty slave file descriptor in the master Christian Brauner reported that if you use the TIOCGPTPEER ioctl() to get a slave pty file descriptor, the resulting file descriptor doesn't look right in /proc/<pid>/fd/<fd>. In particular, he wanted to use readlink() on /proc/self/fd/<fd> to get the pathname of the slave pty (basically implementing "ptsname{_r}()"). The reason for that was that we had generated the wrong 'struct path' when we create the pty in ptmx_open(). In particular, the dentry was correct, but the vfsmount pointed to the mount of the ptmx node. That _can_ be correct - in case you use "/dev/pts/ptmx" to open the master - but usually is not. The normal case is to use /dev/ptmx, which then looks up the pts/ directory, and then the vfsmount of the ptmx node is obviously the /dev directory, not the /dev/pts/ directory. We actually did have the right vfsmount available, but in the wrong place (it gets looked up in 'devpts_acquire()' when we get a reference to the pts filesystem), and so ptmx_open() used the wrong mnt pointer. The end result of this confusion was that the pty worked fine, but when if you did TIOCGPTPEER to get the slave side of the pty, end end result would also work, but have that dodgy 'struct path'. And then when doing "d_path()" on to get the pathname, the vfsmount would not match the root of the pts directory, and d_path() would return an empty pathname thinking that the entry had escaped a bind mount into another mount. This fixes the problem by making devpts_acquire() return the vfsmount for the pts filesystem, allowing ptmx_open() to trivially just use the right mount for the pts dentry, and create the proper 'struct path'. Reported-by: Christian Brauner <christian.brauner@ubuntu.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Acked-by: Eric Biederman <ebiederm@xmission.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> | 17 August 2017, 16:10:48 UTC |
| 0f174b3 | Takashi Iwai | 16 August 2017, 12:18:37 UTC | ALSA: usb-audio: Add mute TLV for playback volumes on C-Media devices C-Media devices (at least some models) mute the playback stream when volumes are set to the minimum value. But this isn't informed via TLV and the user-space, typically PulseAudio, gets confused as if it's still played in a low volume. This patch adds the new flag, min_mute, to struct usb_mixer_elem_info for indicating that the mixer element is with the minimum-mute volume. This flag is set for known C-Media devices in snd_usb_mixer_fu_apply_quirk() in turn. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=196669 Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de> | 17 August 2017, 15:52:16 UTC |
| 872784b | Arnd Bergmann | 17 August 2017, 09:00:26 UTC | Merge tag 'renesas-fixes4-for-v4.13' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into fixes Pull "Fourth Round of Renesas ARM Based SoC Fixes for v4.13" from Simon Horman: * Avoid audio_clkout naming conflict for salvator boards using Renesas R-Car Gen 3 SoCs Morimoto-san says "The clock name of "audio_clkout" is used by the Renesas sound driver. This duplicated naming breaks its clock registering/unregistering. Especially when unbind/bind it can't handle clkout correctly. This patch renames "audio_clkout" to "audio-clkout" to avoid the naming conflict." * tag 'renesas-fixes4-for-v4.13' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas: arm64: renesas: salvator-common: avoid audio_clkout naming conflict | 17 August 2017, 09:00:26 UTC |
| ee7b1f3 | Robin Murphy | 11 August 2017, 16:29:56 UTC | of: fix DMA mask generation Historically, DMA masks have suffered some ambiguity between whether they represent the range of physical memory a device can access, or the address bits a device is capable of driving, particularly since on many platforms the two are equivalent. Whilst there are some stragglers left (dma_max_pfn(), I'm looking at you...), the majority of DMA code has been cleaned up to follow the latter definition, not least since it is the only one which makes sense once IOMMUs are involved. In this respect, of_dma_configure() has always done the wrong thing in how it generates initial masks based on "dma-ranges". Although rounding down did not affect the TI Keystone platform where dma_addr + size is already a power of two, in any other case it results in a mask which is at best unnecessarily constrained and at worst unusable. BCM2837 illustrates the problem nicely, where we have a DMA base of 3GB and a size of 1GB - 16MB, giving dma_addr + size = 0xff000000 and a resultant mask of 0x7fffffff, which is then insufficient to even cover the necessary offset, effectively making all DMA addresses out-of-range. This has been hidden until now (mostly because we don't yet prevent drivers from simply overwriting this initial mask later upon probe), but due to recent changes elsewhere now shows up as USB being broken on Raspberry Pi 3. Make it right by rounding up instead of down, such that the mask correctly correctly describes all possisble bits the device needs to emit. Fixes: 9a6d7298b083 ("of: Calculate device DMA masks based on DT dma-range size") Reported-by: Stefan Wahren <stefan.wahren@i2se.com> Reported-by: Andreas Färber <afaerber@suse.de> Reported-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Robin Murphy <robin.murphy@arm.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Christoph Hellwig <hch@lst.de> | 17 August 2017, 08:23:45 UTC |
| ac9a409 | Linus Torvalds | 17 August 2017, 00:21:20 UTC | Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi Pull SCSI fixes from James Bottomley: "A couple of minor fixes (st, ses) and some bigger driver fixes for qla2xxx (crash triggered by fw dump) and ipr (lockdep problems with mq)" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: ses: Fix wrong page error scsi: ipr: Fix scsi-mq lockdep issue scsi: st: fix blk_get_queue usage scsi: qla2xxx: Fix system crash while triggering FW dump | 17 August 2017, 00:21:20 UTC |
| 422ce07 | Linus Torvalds | 16 August 2017, 23:48:34 UTC | Merge tag 'audit-pr-20170816' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/audit Pull audit fixes from Paul Moore: "Two small fixes to the audit code, both explained well in the respective patch descriptions, but the quick summary is one use-after-free fix, and one silly fanotify notification flag fix" * tag 'audit-pr-20170816' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/audit: audit: Receive unmount event audit: Fix use after free in audit_remove_watch_rule() | 16 August 2017, 23:48:34 UTC |
| d6957f3 | Helge Deller | 15 August 2017, 09:34:19 UTC | printk-formats.txt: Better describe the difference between %pS and %pF Sometimes people seems unclear when to use the %pS or %pF printk format. For example, see commit 51d96dc2e2dc ("random: fix warning message on ia64 and parisc") which fixed such a wrong format string. The documentation should be more clear about the difference. Signed-off-by: Helge Deller <deller@gmx.de> [pmladek@suse.com: Restructure the entire section] Signed-off-by: Petr Mladek <pmladek@suse.com> Reviewed-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Signed-off-by: Helge Deller <deller@gmx.de> | 16 August 2017, 19:09:45 UTC |
| 5a69aec | Benjamin Herrenschmidt | 16 August 2017, 06:01:14 UTC | powerpc: Fix VSX enabling/flushing to also test MSR_FP and MSR_VEC VSX uses a combination of the old vector registers, the old FP registers and new "second halves" of the FP registers. Thus when we need to see the VSX state in the thread struct (flush_vsx_to_thread()) or when we'll use the VSX in the kernel (enable_kernel_vsx()) we need to ensure they are all flushed into the thread struct if either of them is individually enabled. Unfortunately we only tested if the whole VSX was enabled, not if they were individually enabled. Fixes: 72cd7b44bc99 ("powerpc: Uncomment and make enable_kernel_vsx() routine available") Cc: stable@vger.kernel.org # v4.3+ Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> | 16 August 2017, 09:35:54 UTC |
| 4098116 | Thomas Bogendoerfer | 12 August 2017, 21:36:47 UTC | parisc: pci memory bar assignment fails with 64bit kernels on dino/cujo For 64bit kernels the lmmio_space_offset of the host bridge window isn't set correctly on systems with dino/cujo PCI host bridges. This leads to not assigned memory bars and failing drivers, which need to use these bars. Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: <stable@vger.kernel.org> Acked-by: Helge Deller <deller@gmx.de> Signed-off-by: Helge Deller <deller@gmx.de> | 16 August 2017, 07:50:39 UTC |
| 510c8a8 | Linus Torvalds | 16 August 2017, 01:52:28 UTC | Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net Pull networking fixes from David Miller: 1) Fix TCP checksum offload handling in iwlwifi driver, from Emmanuel Grumbach. 2) In ksz DSA tagging code, free SKB if skb_put_padto() fails. From Vivien Didelot. 3) Fix two regressions with bonding on wireless, from Andreas Born. 4) Fix build when busypoll is disabled, from Daniel Borkmann. 5) Fix copy_linear_skb() wrt. SO_PEEK_OFF, from Eric Dumazet. 6) Set SKB cached route properly in inet_rtm_getroute(), from Florian Westphal. 7) Fix PCI-E relaxed ordering handling in cxgb4 driver, from Ding Tianhong. 8) Fix module refcnt leak in ULP code, from Sabrina Dubroca. 9) Fix use of GFP_KERNEL in atomic contexts in AF_KEY code, from Eric Dumazet. 10) Need to purge socket write queue in dccp_destroy_sock(), also from Eric Dumazet. 11) Make bpf_trace_printk() work properly on 32-bit architectures, from Daniel Borkmann. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (47 commits) bpf: fix bpf_trace_printk on 32 bit archs PCI: fix oops when try to find Root Port for a PCI device sfc: don't try and read ef10 data on non-ef10 NIC net_sched: remove warning from qdisc_hash_add net_sched/sfq: update hierarchical backlog when drop packet net_sched: reset pointers to tcf blocks in classful qdiscs' destructors ipv4: fix NULL dereference in free_fib_info_rcu() net: Fix a typo in comment about sock flags. ipv6: fix NULL dereference in ip6_route_dev_notify() tcp: fix possible deadlock in TCP stack vs BPF filter dccp: purge write queue in dccp_destroy_sock() udp: fix linear skb reception with PEEK_OFF ipv6: release rt6->rt6i_idev properly during ifdown af_key: do not use GFP_KERNEL in atomic contexts tcp: ulp: avoid module refcnt leak in tcp_set_ulp net/cxgb4vf: Use new PCI_DEV_FLAGS_NO_RELAXED_ORDERING flag net/cxgb4: Use new PCI_DEV_FLAGS_NO_RELAXED_ORDERING flag PCI: Disable Relaxed Ordering Attributes for AMD A1100 PCI: Disable Relaxed Ordering for some Intel processors PCI: Disable PCIe Relaxed Ordering if unsupported ... | 16 August 2017, 01:52:28 UTC |
| 88a5c69 | Daniel Borkmann | 15 August 2017, 23:45:33 UTC | bpf: fix bpf_trace_printk on 32 bit archs James reported that on MIPS32 bpf_trace_printk() is currently broken while MIPS64 works fine: bpf_trace_printk() uses conditional operators to attempt to pass different types to __trace_printk() depending on the format operators. This doesn't work as intended on 32-bit architectures where u32 and long are passed differently to u64, since the result of C conditional operators follows the "usual arithmetic conversions" rules, such that the values passed to __trace_printk() will always be u64 [causing issues later in the va_list handling for vscnprintf()]. For example the samples/bpf/tracex5 test printed lines like below on MIPS32, where the fd and buf have come from the u64 fd argument, and the size from the buf argument: [...] 1180.941542: 0x00000001: write(fd=1, buf= (null), size=6258688) Instead of this: [...] 1625.616026: 0x00000001: write(fd=1, buf=009e4000, size=512) One way to get it working is to expand various combinations of argument types into 8 different combinations for 32 bit and 64 bit kernels. Fix tested by James on MIPS32 and MIPS64 as well that it resolves the issue. Fixes: 9c959c863f82 ("tracing: Allow BPF programs to call bpf_trace_printk()") Reported-by: James Hogan <james.hogan@imgtec.com> Tested-by: James Hogan <james.hogan@imgtec.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: David S. Miller <davem@davemloft.net> | 16 August 2017, 00:32:15 UTC |
| 0e40523 | dingtianhong | 15 August 2017, 15:24:48 UTC | PCI: fix oops when try to find Root Port for a PCI device Eric report a oops when booting the system after applying the commit a99b646afa8a ("PCI: Disable PCIe Relaxed..."): [ 4.241029] BUG: unable to handle kernel NULL pointer dereference at 0000000000000050 [ 4.247001] IP: pci_find_pcie_root_port+0x62/0x80 [ 4.253011] PGD 0 [ 4.253011] P4D 0 [ 4.253011] [ 4.258013] Oops: 0000 [#1] SMP DEBUG_PAGEALLOC [ 4.262015] Modules linked in: [ 4.265005] CPU: 31 PID: 1 Comm: swapper/0 Not tainted 4.13.0-dbx-DEV #316 [ 4.271002] Hardware name: Intel RML,PCH/Iota_QC_19, BIOS 2.40.0 06/22/2016 [ 4.279002] task: ffffa2ee38cfa040 task.stack: ffffa51ec0004000 [ 4.285001] RIP: 0010:pci_find_pcie_root_port+0x62/0x80 [ 4.290012] RSP: 0000:ffffa51ec0007ab8 EFLAGS: 00010246 [ 4.295003] RAX: 0000000000000000 RBX: ffffa2ee36bae000 RCX: 0000000000000006 [ 4.303002] RDX: 000000000000081c RSI: ffffa2ee38cfa8c8 RDI: ffffa2ee36bae000 [ 4.310013] RBP: ffffa51ec0007b58 R08: 0000000000000001 R09: 0000000000000000 [ 4.317001] R10: 0000000000000000 R11: 0000000000000000 R12: ffffa51ec0007ad0 [ 4.324005] R13: ffffa2ee36bae098 R14: 0000000000000002 R15: ffffa2ee37204818 [ 4.331002] FS: 0000000000000000(0000) GS:ffffa2ee3fcc0000(0000) knlGS:0000000000000000 [ 4.339002] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 4.345001] CR2: 0000000000000050 CR3: 000000401000f000 CR4: 00000000001406e0 [ 4.351002] Call Trace: [ 4.354012] ? pci_configure_device+0x19f/0x570 [ 4.359002] ? pci_conf1_read+0xb8/0xf0 [ 4.363002] ? raw_pci_read+0x23/0x40 [ 4.366011] ? pci_read+0x2c/0x30 [ 4.370014] ? pci_read_config_word+0x67/0x70 [ 4.374012] pci_device_add+0x28/0x230 [ 4.378012] ? pci_vpd_f0_read+0x50/0x80 [ 4.382014] pci_scan_single_device+0x96/0xc0 [ 4.386012] pci_scan_slot+0x79/0xf0 [ 4.389001] pci_scan_child_bus+0x31/0x180 [ 4.394014] acpi_pci_root_create+0x1c6/0x240 [ 4.398013] pci_acpi_scan_root+0x15f/0x1b0 [ 4.402012] acpi_pci_root_add+0x2e6/0x400 [ 4.406012] ? acpi_evaluate_integer+0x37/0x60 [ 4.411002] acpi_bus_attach+0xdf/0x200 [ 4.415002] acpi_bus_attach+0x6a/0x200 [ 4.418014] acpi_bus_attach+0x6a/0x200 [ 4.422013] acpi_bus_scan+0x38/0x70 [ 4.426011] acpi_scan_init+0x10c/0x271 [ 4.429001] acpi_init+0x2fa/0x348 [ 4.433004] ? acpi_sleep_proc_init+0x2d/0x2d [ 4.437001] do_one_initcall+0x43/0x169 [ 4.441001] kernel_init_freeable+0x1d0/0x258 [ 4.445003] ? rest_init+0xe0/0xe0 [ 4.449001] kernel_init+0xe/0x150 ====================== cut here ============================= It looks like the pci_find_pcie_root_port() was trying to find the Root Port for the PCI device which is the Root Port already, it will return NULL and trigger the problem, so check the highest_pcie_bridge to fix thie problem. Fixes: a99b646afa8a ("PCI: Disable PCIe Relaxed Ordering if unsupported") Fixes: c56d4450eb68 ("PCI: Turn off Request Attributes to avoid Chelsio T5 Completion erratum") Reported-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: Ding Tianhong <dingtianhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 16 August 2017, 00:25:16 UTC |
| 61deee9 | Bert Kenward | 15 August 2017, 13:55:32 UTC | sfc: don't try and read ef10 data on non-ef10 NIC The MAC stats command takes a port ID, which doesn't exist on pre-ef10 NICs (5000- and 6000- series). This is extracted from the NIC specific data; we misinterpret this as the ef10 data structure, causing us to read potentially unallocated data. With a KASAN kernel this can cause errors with: BUG: KASAN: slab-out-of-bounds in efx_mcdi_mac_stats Fixes: 0a2ab4d988d7 ("sfc: set the port-id when calling MC_CMD_MAC_STATS") Reported-by: Stefano Brivio <sbrivio@redhat.com> Tested-by: Stefano Brivio <sbrivio@redhat.com> Signed-off-by: Bert Kenward <bkenward@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 16 August 2017, 00:19:34 UTC |
| c90e951 | Konstantin Khlebnikov | 15 August 2017, 13:39:05 UTC | net_sched: remove warning from qdisc_hash_add It was added in commit e57a784d8cae ("pkt_sched: set root qdisc before change() in attach_default_qdiscs()") to hide duplicates from "tc qdisc show" for incative deivices. After 59cc1f61f ("net: sched: convert qdisc linked list to hashtable") it triggered when classful qdisc is added to inactive device because default qdiscs are added before switching root qdisc. Anyway after commit ea3274695353 ("net: sched: avoid duplicates in qdisc dump") duplicates are filtered right in dumper. Signed-off-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru> Signed-off-by: David S. Miller <davem@davemloft.net> | 16 August 2017, 00:16:39 UTC |
| 325d5dc | Konstantin Khlebnikov | 15 August 2017, 13:37:04 UTC | net_sched/sfq: update hierarchical backlog when drop packet When sfq_enqueue() drops head packet or packet from another queue it have to update backlog at upper qdiscs too. Fixes: 2ccccf5fb43f ("net_sched: update hierarchical backlog too") Signed-off-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 16 August 2017, 00:16:39 UTC |
| 8989042 | Konstantin Khlebnikov | 15 August 2017, 13:35:21 UTC | net_sched: reset pointers to tcf blocks in classful qdiscs' destructors Traffic filters could keep direct pointers to classes in classful qdisc, thus qdisc destruction first removes all filters before freeing classes. Class destruction methods also tries to free attached filters but now this isn't safe because tcf_block_put() unlike to tcf_destroy_chain() cannot be called second time. This patch set class->block to NULL after first tcf_block_put() and turn second call into no-op. Fixes: 6529eaba33f0 ("net: sched: introduce tcf block infractructure") Signed-off-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 16 August 2017, 00:16:39 UTC |
| 187e5b3 | Eric Dumazet | 15 August 2017, 12:26:17 UTC | ipv4: fix NULL dereference in free_fib_info_rcu() If fi->fib_metrics could not be allocated in fib_create_info() we attempt to dereference a NULL pointer in free_fib_info_rcu() : m = fi->fib_metrics; if (m != &dst_default_metrics && atomic_dec_and_test(&m->refcnt)) kfree(m); Before my recent patch, we used to call kfree(NULL) and nothing wrong happened. Instead of using RCU to defer freeing while we are under memory stress, it seems better to take immediate action. This was reported by syzkaller team. Fixes: 3fb07daff8e9 ("ipv4: add reference counting to metrics") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: Dmitry Vyukov <dvyukov@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 16 August 2017, 00:07:52 UTC |
| b3dc8f7 | Tonghao Zhang | 15 August 2017, 11:28:54 UTC | net: Fix a typo in comment about sock flags. Signed-off-by: Tonghao Zhang <xiangxia.m.yue@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 16 August 2017, 00:07:17 UTC |
| 12d94a8 | Eric Dumazet | 15 August 2017, 11:09:51 UTC | ipv6: fix NULL dereference in ip6_route_dev_notify() Based on a syzkaller report [1], I found that a per cpu allocation failure in snmp6_alloc_dev() would then lead to NULL dereference in ip6_route_dev_notify(). It seems this is a very old bug, thus no Fixes tag in this submission. Let's add in6_dev_put_clear() helper, as we will probably use it elsewhere (once available/present in net-next) [1] kasan: CONFIG_KASAN_INLINE enabled kasan: GPF could be caused by NULL-ptr deref or user memory access general protection fault: 0000 [#1] SMP KASAN Dumping ftrace buffer: (ftrace buffer empty) Modules linked in: CPU: 1 PID: 17294 Comm: syz-executor6 Not tainted 4.13.0-rc2+ #10 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 task: ffff88019f456680 task.stack: ffff8801c6e58000 RIP: 0010:__read_once_size include/linux/compiler.h:250 [inline] RIP: 0010:atomic_read arch/x86/include/asm/atomic.h:26 [inline] RIP: 0010:refcount_sub_and_test+0x7d/0x1b0 lib/refcount.c:178 RSP: 0018:ffff8801c6e5f1b0 EFLAGS: 00010202 RAX: 0000000000000037 RBX: dffffc0000000000 RCX: ffffc90005d25000 RDX: ffff8801c6e5f218 RSI: ffffffff82342bbf RDI: 0000000000000001 RBP: ffff8801c6e5f240 R08: 0000000000000001 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000000 R12: 1ffff10038dcbe37 R13: 0000000000000006 R14: 0000000000000001 R15: 00000000000001b8 FS: 00007f21e0429700(0000) GS:ffff8801dc100000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000001ddbc22000 CR3: 00000001d632b000 CR4: 00000000001426e0 DR0: 0000000020000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000600 Call Trace: refcount_dec_and_test+0x1a/0x20 lib/refcount.c:211 in6_dev_put include/net/addrconf.h:335 [inline] ip6_route_dev_notify+0x1c9/0x4a0 net/ipv6/route.c:3732 notifier_call_chain+0x136/0x2c0 kernel/notifier.c:93 __raw_notifier_call_chain kernel/notifier.c:394 [inline] raw_notifier_call_chain+0x2d/0x40 kernel/notifier.c:401 call_netdevice_notifiers_info+0x51/0x90 net/core/dev.c:1678 call_netdevice_notifiers net/core/dev.c:1694 [inline] rollback_registered_many+0x91c/0xe80 net/core/dev.c:7107 rollback_registered+0x1be/0x3c0 net/core/dev.c:7149 register_netdevice+0xbcd/0xee0 net/core/dev.c:7587 register_netdev+0x1a/0x30 net/core/dev.c:7669 loopback_net_init+0x76/0x160 drivers/net/loopback.c:214 ops_init+0x10a/0x570 net/core/net_namespace.c:118 setup_net+0x313/0x710 net/core/net_namespace.c:294 copy_net_ns+0x27c/0x580 net/core/net_namespace.c:418 create_new_namespaces+0x425/0x880 kernel/nsproxy.c:107 unshare_nsproxy_namespaces+0xae/0x1e0 kernel/nsproxy.c:206 SYSC_unshare kernel/fork.c:2347 [inline] SyS_unshare+0x653/0xfa0 kernel/fork.c:2297 entry_SYSCALL_64_fastpath+0x1f/0xbe RIP: 0033:0x4512c9 RSP: 002b:00007f21e0428c08 EFLAGS: 00000216 ORIG_RAX: 0000000000000110 RAX: ffffffffffffffda RBX: 0000000000718150 RCX: 00000000004512c9 RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000062020200 RBP: 0000000000000086 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000216 R12: 00000000004b973d R13: 00000000ffffffff R14: 000000002001d000 R15: 00000000000002dd Code: 50 2b 34 82 c7 00 f1 f1 f1 f1 c7 40 04 04 f2 f2 f2 c7 40 08 f3 f3 f3 f3 e8 a1 43 39 ff 4c 89 f8 48 8b 95 70 ff ff ff 48 c1 e8 03 <0f> b6 0c 18 4c 89 f8 83 e0 07 83 c0 03 38 c8 7c 08 84 c9 0f 85 RIP: __read_once_size include/linux/compiler.h:250 [inline] RSP: ffff8801c6e5f1b0 RIP: atomic_read arch/x86/include/asm/atomic.h:26 [inline] RSP: ffff8801c6e5f1b0 RIP: refcount_sub_and_test+0x7d/0x1b0 lib/refcount.c:178 RSP: ffff8801c6e5f1b0 ---[ end trace e441d046c6410d31 ]--- Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: Dmitry Vyukov <dvyukov@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 16 August 2017, 00:06:34 UTC |
| b5fed47 | Jan Kara | 15 August 2017, 11:00:37 UTC | audit: Receive unmount event Although audit_watch_handle_event() can handle FS_UNMOUNT event, it is not part of AUDIT_FS_WATCH mask and thus such event never gets to audit_watch_handle_event(). Thus fsnotify marks are deleted by fsnotify subsystem on unmount without audit being notified about that which leads to a strange state of existing audit rules with dead fsnotify marks. Add FS_UNMOUNT to the mask of events to be received so that audit can clean up its state accordingly. Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Paul Moore <paul@paul-moore.com> | 15 August 2017, 20:03:00 UTC |
| d76036a | Jan Kara | 15 August 2017, 11:00:36 UTC | audit: Fix use after free in audit_remove_watch_rule() audit_remove_watch_rule() drops watch's reference to parent but then continues to work with it. That is not safe as parent can get freed once we drop our reference. The following is a trivial reproducer: mount -o loop image /mnt touch /mnt/file auditctl -w /mnt/file -p wax umount /mnt auditctl -D <crash in fsnotify_destroy_mark()> Grab our own reference in audit_remove_watch_rule() earlier to make sure mark does not get freed under us. CC: stable@vger.kernel.org Reported-by: Tony Jones <tonyj@suse.de> Signed-off-by: Jan Kara <jack@suse.cz> Tested-by: Tony Jones <tonyj@suse.de> Signed-off-by: Paul Moore <paul@paul-moore.com> | 15 August 2017, 19:58:17 UTC |
| 40c6d1b | Linus Torvalds | 15 August 2017, 19:49:43 UTC | Merge tag 'linux-kselftest-4.13-rc6-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest Pull kselftest fixes from Shuah Khan: "This update consists of important compile and run-time error fixes to timers/freq-step, kmod, and sysctl tests" * tag 'linux-kselftest-4.13-rc6-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest: selftests: timers: freq-step: fix compile error selftests: futex: fix run_tests target test_sysctl: fix sysctl.sh by making it executable test_kmod: fix kmod.sh by making it executable | 15 August 2017, 19:49:43 UTC |
| 7a7c286 | Chunming Zhou | 11 August 2017, 01:34:33 UTC | drm/amdgpu: save list length when fence is signaled update the list first to avoid redundant checks. Signed-off-by: Chunming Zhou <David1.Zhou@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org | 15 August 2017, 18:10:01 UTC |
| 0a6f041 | David S. Miller | 15 August 2017, 17:19:14 UTC | Merge tag 'wireless-drivers-for-davem-2017-08-15' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers Kalle Valo says: ==================== wireless-drivers fixes for 4.13 This time quite a few fixes for iwlwifi and one major regression fix for brcmfmac. For the iwlwifi aggregation bug a small change was needed for mac80211, but as Johannes is still away the mac80211 patch is taken via wireless-drivers tree. brcmfmac * fix firmware crash (a recent regression in bcm4343{0,1,8} iwlwifi * Some simple PCI HW ID fix-ups and additions for family 9000 * Remove a bogus warning message with new FWs (bug #196915) * Don't allow illegal channel options to be used (bug #195299) * A fix for checksum offload in family 9000 * A fix serious throughput degradation in 11ac with multiple streams * An old bug in SMPS where the firmware was not aware of SMPS changes * Fix a memory leak in the SAR code * Fix a stuck queue case in AP mode; * Convert a WARN to a simple debug in a legitimate race case (from which we can recover) * Fix a severe throughput aggregation on 9000-family devices due to aggregation issues, needed a small change in mac80211 ==================== Signed-off-by: David S. Miller <davem@davemloft.net> | 15 August 2017, 17:19:14 UTC |
| 4450675 | Arnd Bergmann | 15 August 2017, 15:37:10 UTC | Merge tag 'at91-ab-4.13-dt-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux into fixes Pull "DT fixes for 4.13" from Alexandre Belloni: - Fix NAND flash support for sama5d2 * tag 'at91-ab-4.13-dt-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: ARM: dts: at91: sama5d2: fix EBI/NAND controllers declaration ARM: dts: at91: sama5d2: use sama5d2 compatible string for SMC | 15 August 2017, 15:37:10 UTC |
| 64c2c37 | Arnd Bergmann | 15 August 2017, 15:34:52 UTC | Merge tag 'imx-fixes-4.13-2' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into fixes Pull "i.MX fixes for 4.13, round 2" from Shawn Guo: - Add missing 'ranges' property for i.MX25 device tree TSCADC node, so that it's child nodes ADC and TSC device can be probed by kernel. - Fix i.MX GPCv2 power domain driver to request regulator after power domain initialization, since regulator could defer probing and therefore cause power domain initialized twice. * tag 'imx-fixes-4.13-2' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: ARM: dts: i.MX25: add ranges to tscadc soc: imx: gpcv2: fix regulator deferred probe | 15 August 2017, 15:34:52 UTC |
| 69a80d8 | Arnd Bergmann | 15 August 2017, 15:34:04 UTC | Merge tag 'imx-fixes-4.13' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into fixes Pull "i.MX fixes for 4.13" from Shawn Guo: - A fix for imx7d-sdb board to move pinctrl_spi4 pins from low power iomux controller to normal iomuxc node, as the pins belong to normal iomuxc rather than low power one. * tag 'imx-fixes-4.13' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: ARM: dts: imx7d-sdb: Put pinctrl_spi4 in the correct location | 15 August 2017, 15:34:04 UTC |
| a8e800f | Takashi Iwai | 14 August 2017, 12:35:50 UTC | ALSA: usb-audio: Apply sample rate quirk to Sennheiser headset A Senheisser headset requires the typical sample-rate quirk for avoiding spurious errors from inquiring the current sample rate like: usb 1-1: 2:1: cannot get freq at ep 0x4 usb 1-1: 3:1: cannot get freq at ep 0x83 The USB ID 1395:740a has to be added to the entries in snd_usb_get_sample_rate_quirk(). Bugzilla: https://bugzilla.suse.com/show_bug.cgi?id=1052580 Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de> | 15 August 2017, 07:11:23 UTC |
| 7e1d90f | Daniel Mentz | 14 August 2017, 21:46:01 UTC | ALSA: seq: 2nd attempt at fixing race creating a queue commit 4842e98f26dd80be3623c4714a244ba52ea096a8 ("ALSA: seq: Fix race at creating a queue") attempted to fix a race reported by syzkaller. That fix has been described as follows: " When a sequencer queue is created in snd_seq_queue_alloc(),it adds the new queue element to the public list before referencing it. Thus the queue might be deleted before the call of snd_seq_queue_use(), and it results in the use-after-free error, as spotted by syzkaller. The fix is to reference the queue object at the right time. " Even with that fix in place, syzkaller reported a use-after-free error. It specifically pointed to the last instruction "return q->queue" in snd_seq_queue_alloc(). The pointer q is being used after kfree() has been called on it. It turned out that there is still a small window where a race can happen. The window opens at snd_seq_ioctl_create_queue()->snd_seq_queue_alloc()->queue_list_add() and closes at snd_seq_ioctl_create_queue()->queueptr()->snd_use_lock_use(). Between these two calls, a different thread could delete the queue and possibly re-create a different queue in the same location in queue_list. This change prevents this situation by calling snd_use_lock_use() from snd_seq_queue_alloc() prior to calling queue_list_add(). It is then the caller's responsibility to call snd_use_lock_free(&q->use_lock). Fixes: 4842e98f26dd ("ALSA: seq: Fix race at creating a queue") Reported-by: Dmitry Vyukov <dvyukov@google.com> Cc: <stable@vger.kernel.org> Signed-off-by: Daniel Mentz <danielmentz@google.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> | 15 August 2017, 06:02:35 UTC |
| d624d27 | Eric Dumazet | 15 August 2017, 00:44:43 UTC | tcp: fix possible deadlock in TCP stack vs BPF filter Filtering the ACK packet was not put at the right place. At this place, we already allocated a child and put it into accept queue. We absolutely need to call tcp_child_process() to release its spinlock, or we will deadlock at accept() or close() time. Found by syzkaller team (Thanks a lot !) Fixes: 8fac365f63c8 ("tcp: Add a tcp_filter hook before handle ack packet") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: Dmitry Vyukov <dvyukov@google.com> Cc: Chenbo Feng <fengc@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 15 August 2017, 05:31:27 UTC |
| 7749d4f | Eric Dumazet | 14 August 2017, 21:10:25 UTC | dccp: purge write queue in dccp_destroy_sock() syzkaller reported that DCCP could have a non empty write queue at dismantle time. WARNING: CPU: 1 PID: 2953 at net/core/stream.c:199 sk_stream_kill_queues+0x3ce/0x520 net/core/stream.c:199 Kernel panic - not syncing: panic_on_warn set ... CPU: 1 PID: 2953 Comm: syz-executor0 Not tainted 4.13.0-rc4+ #2 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:16 [inline] dump_stack+0x194/0x257 lib/dump_stack.c:52 panic+0x1e4/0x417 kernel/panic.c:180 __warn+0x1c4/0x1d9 kernel/panic.c:541 report_bug+0x211/0x2d0 lib/bug.c:183 fixup_bug+0x40/0x90 arch/x86/kernel/traps.c:190 do_trap_no_signal arch/x86/kernel/traps.c:224 [inline] do_trap+0x260/0x390 arch/x86/kernel/traps.c:273 do_error_trap+0x120/0x390 arch/x86/kernel/traps.c:310 do_invalid_op+0x1b/0x20 arch/x86/kernel/traps.c:323 invalid_op+0x1e/0x30 arch/x86/entry/entry_64.S:846 RIP: 0010:sk_stream_kill_queues+0x3ce/0x520 net/core/stream.c:199 RSP: 0018:ffff8801d182f108 EFLAGS: 00010297 RAX: ffff8801d1144140 RBX: ffff8801d13cb280 RCX: 0000000000000000 RDX: 0000000000000000 RSI: ffffffff85137b00 RDI: ffff8801d13cb280 RBP: ffff8801d182f148 R08: 0000000000000001 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000000 R12: ffff8801d13cb4d0 R13: ffff8801d13cb3b8 R14: ffff8801d13cb300 R15: ffff8801d13cb3b8 inet_csk_destroy_sock+0x175/0x3f0 net/ipv4/inet_connection_sock.c:835 dccp_close+0x84d/0xc10 net/dccp/proto.c:1067 inet_release+0xed/0x1c0 net/ipv4/af_inet.c:425 sock_release+0x8d/0x1e0 net/socket.c:597 sock_close+0x16/0x20 net/socket.c:1126 __fput+0x327/0x7e0 fs/file_table.c:210 ____fput+0x15/0x20 fs/file_table.c:246 task_work_run+0x18a/0x260 kernel/task_work.c:116 exit_task_work include/linux/task_work.h:21 [inline] do_exit+0xa32/0x1b10 kernel/exit.c:865 do_group_exit+0x149/0x400 kernel/exit.c:969 get_signal+0x7e8/0x17e0 kernel/signal.c:2330 do_signal+0x94/0x1ee0 arch/x86/kernel/signal.c:808 exit_to_usermode_loop+0x21c/0x2d0 arch/x86/entry/common.c:157 prepare_exit_to_usermode arch/x86/entry/common.c:194 [inline] syscall_return_slowpath+0x3a7/0x450 arch/x86/entry/common.c:263 Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: Dmitry Vyukov <dvyukov@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 15 August 2017, 05:28:18 UTC |
| 42b7305 | Al Viro | 14 August 2017, 19:31:38 UTC | udp: fix linear skb reception with PEEK_OFF copy_linear_skb() is broken; both of its callers actually expect 'len' to be the amount we are trying to copy, not the offset of the end. Fix it keeping the meanings of arguments in sync with what the callers (both of them) expect. Also restore a saner behavior on EFAULT (i.e. preserving the iov_iter position in case of failure): The commit fd851ba9caa9 ("udp: harden copy_linear_skb()") avoids the more destructive effect of the buggy copy_linear_skb(), e.g. no more invalid memory access, but said function still behaves incorrectly: when peeking with offset it can fail with EINVAL instead of copying the appropriate amount of memory. Reported-by: Sasha Levin <alexander.levin@verizon.com> Fixes: b65ac44674dd ("udp: try to avoid 2 cache miss on dequeue") Fixes: fd851ba9caa9 ("udp: harden copy_linear_skb()") Signed-off-by: Al Viro <viro@ZenIV.linux.org.uk> Acked-by: Paolo Abeni <pabeni@redhat.com> Tested-by: Sasha Levin <alexander.levin@verizon.com> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 15 August 2017, 05:26:51 UTC |
| e5645f5 | Wei Wang | 14 August 2017, 17:44:59 UTC | ipv6: release rt6->rt6i_idev properly during ifdown When a dst is created by addrconf_dst_alloc() for a host route or an anycast route, dst->dev points to loopback dev while rt6->rt6i_idev points to a real device. When the real device goes down, the current cleanup code only checks for dst->dev and assumes rt6->rt6i_idev->dev is the same. This causes the refcount leak on the real device in the above situation. This patch makes sure to always release the refcount taken on rt6->rt6i_idev during dst_dev_put(). Fixes: 587fea741134 ("ipv6: mark DST_NOGC and remove the operation of dst_free()") Reported-by: John Stultz <john.stultz@linaro.org> Tested-by: John Stultz <john.stultz@linaro.org> Tested-by: Martin KaFai Lau <kafai@fb.com> Signed-off-by: Wei Wang <weiwan@google.com> Signed-off-by: Martin KaFai Lau <kafai@fb.com> Acked-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 15 August 2017, 05:18:48 UTC |
| 36f41f8 | Eric Dumazet | 14 August 2017, 17:16:45 UTC | af_key: do not use GFP_KERNEL in atomic contexts pfkey_broadcast() might be called from non process contexts, we can not use GFP_KERNEL in these cases [1]. This patch partially reverts commit ba51b6be38c1 ("net: Fix RCU splat in af_key"), only keeping the GFP_ATOMIC forcing under rcu_read_lock() section. [1] : syzkaller reported : in_atomic(): 1, irqs_disabled(): 0, pid: 2932, name: syzkaller183439 3 locks held by syzkaller183439/2932: #0: (&net->xfrm.xfrm_cfg_mutex){+.+.+.}, at: [<ffffffff83b43888>] pfkey_sendmsg+0x4c8/0x9f0 net/key/af_key.c:3649 #1: (&pfk->dump_lock){+.+.+.}, at: [<ffffffff83b467f6>] pfkey_do_dump+0x76/0x3f0 net/key/af_key.c:293 #2: (&(&net->xfrm.xfrm_policy_lock)->rlock){+...+.}, at: [<ffffffff83957632>] spin_lock_bh include/linux/spinlock.h:304 [inline] #2: (&(&net->xfrm.xfrm_policy_lock)->rlock){+...+.}, at: [<ffffffff83957632>] xfrm_policy_walk+0x192/0xa30 net/xfrm/xfrm_policy.c:1028 CPU: 0 PID: 2932 Comm: syzkaller183439 Not tainted 4.13.0-rc4+ #24 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:16 [inline] dump_stack+0x194/0x257 lib/dump_stack.c:52 ___might_sleep+0x2b2/0x470 kernel/sched/core.c:5994 __might_sleep+0x95/0x190 kernel/sched/core.c:5947 slab_pre_alloc_hook mm/slab.h:416 [inline] slab_alloc mm/slab.c:3383 [inline] kmem_cache_alloc+0x24b/0x6e0 mm/slab.c:3559 skb_clone+0x1a0/0x400 net/core/skbuff.c:1037 pfkey_broadcast_one+0x4b2/0x6f0 net/key/af_key.c:207 pfkey_broadcast+0x4ba/0x770 net/key/af_key.c:281 dump_sp+0x3d6/0x500 net/key/af_key.c:2685 xfrm_policy_walk+0x2f1/0xa30 net/xfrm/xfrm_policy.c:1042 pfkey_dump_sp+0x42/0x50 net/key/af_key.c:2695 pfkey_do_dump+0xaa/0x3f0 net/key/af_key.c:299 pfkey_spddump+0x1a0/0x210 net/key/af_key.c:2722 pfkey_process+0x606/0x710 net/key/af_key.c:2814 pfkey_sendmsg+0x4d6/0x9f0 net/key/af_key.c:3650 sock_sendmsg_nosec net/socket.c:633 [inline] sock_sendmsg+0xca/0x110 net/socket.c:643 ___sys_sendmsg+0x755/0x890 net/socket.c:2035 __sys_sendmsg+0xe5/0x210 net/socket.c:2069 SYSC_sendmsg net/socket.c:2080 [inline] SyS_sendmsg+0x2d/0x50 net/socket.c:2076 entry_SYSCALL_64_fastpath+0x1f/0xbe RIP: 0033:0x445d79 RSP: 002b:00007f32447c1dc8 EFLAGS: 00000202 ORIG_RAX: 000000000000002e RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 0000000000445d79 RDX: 0000000000000000 RSI: 000000002023dfc8 RDI: 0000000000000008 RBP: 0000000000000086 R08: 00007f32447c2700 R09: 00007f32447c2700 R10: 00007f32447c2700 R11: 0000000000000202 R12: 0000000000000000 R13: 00007ffe33edec4f R14: 00007f32447c29c0 R15: 0000000000000000 Fixes: ba51b6be38c1 ("net: Fix RCU splat in af_key") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: Dmitry Vyukov <dvyukov@google.com> Cc: David Ahern <dsa@cumulusnetworks.com> Acked-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 15 August 2017, 05:18:12 UTC |
| 539a06b | Sabrina Dubroca | 14 August 2017, 16:04:24 UTC | tcp: ulp: avoid module refcnt leak in tcp_set_ulp __tcp_ulp_find_autoload returns tcp_ulp_ops after taking a reference on the module. Then, if ->init fails, tcp_set_ulp propagates the error but nothing releases that reference. Fixes: 734942cc4ea6 ("tcp: ULP infrastructure") Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Signed-off-by: David S. Miller <davem@davemloft.net> | 15 August 2017, 05:17:05 UTC |
| bae514a | David S. Miller | 15 August 2017, 05:14:51 UTC | Merge branch 'Add-new-PCI_DEV_FLAGS_NO_RELAXED_ORDERING-flag' Ding Tianhong says: ==================== Add new PCI_DEV_FLAGS_NO_RELAXED_ORDERING flag Some devices have problems with Transaction Layer Packets with the Relaxed Ordering Attribute set. This patch set adds a new PCIe Device Flag, PCI_DEV_FLAGS_NO_RELAXED_ORDERING, a set of PCI Quirks to catch some known devices with Relaxed Ordering issues, and a use of this new flag by the cxgb4 driver to avoid using Relaxed Ordering with problematic Root Complex Ports. It's been years since I've submitted kernel.org patches, I appolgise for the almost certain submission errors. v2: Alexander point out that the v1 was only a part of the whole solution, some platform which has some issues could use the new flag to indicate that it is not safe to enable relaxed ordering attribute, then we need to clear the relaxed ordering enable bits in the PCI configuration when initializing the device. So add a new second patch to modify the PCI initialization code to clear the relaxed ordering enable bit in the event that the root complex doesn't want relaxed ordering enabled. The third patch was base on the v1's second patch and only be changed to query the relaxed ordering enable bit in the PCI configuration space to allow the Chelsio NIC to send TLPs with the relaxed ordering attributes set. This version didn't plan to drop the defines for Intel Drivers to use the new checking way to enable relaxed ordering because it is not the hardest part of the moment, we could fix it in next patchset when this patches reach the goal. v3: Redesigned the logic for pci_configure_relaxed_ordering when configuration, If a PCIe device didn't enable the relaxed ordering attribute default, we should not do anything in the PCIe configuration, otherwise we should check if any of the devices above us do not support relaxed ordering by the PCI_DEV_FLAGS_NO_RELAXED_ORDERING flag, then base on the result if we get a return that indicate that the relaxed ordering is not supported we should update our device to disable relaxed ordering in configuration space. If the device above us doesn't exist or isn't the PCIe device, we shouldn't do anything and skip updating relaxed ordering because we are probably running in a guest. v4: Rename the functions pcie_get_relaxed_ordering and pcie_disable_relaxed_ordering according John's suggestion, and modify the description, use the true/false as the return value. We shouldn't enable relaxed ordering attribute by the setting in the root complex configuration space for PCIe device, so fix it for cxgb4. Fix some format issues. v5: Removed the unnecessary code for some function which only return the bool value, and add the check for VF device. Make this patch set base on 4.12-rc5. v6: Fix the logic error in the need to enable the relaxed ordering attribute for cxgb4. v7: The cxgb4 drivers will enable the PCIe Capability Device Control[Relaxed Ordering Enable] in PCI Probe() routine, this will break our current solution for some platform which has problematic when enable the relaxed ordering attribute. According to the latest recommendations, remove the enable_pcie_relaxed_ordering(), although it could not cover the Peer-to-Peer scene, but we agree to leave this problem until we really trigger it. Make this patch set base on 4.12 release version. v8: Change the second patch title and description to make it more reasonable, add the acked-by from Alex and Ashok. Add a new patch to enable the Relaxed Ordering Attribute for cxgb4vf driver. Make this patch set base on 4.13-rc2. v9: The document (https://software.intel.com/sites/default/files/managed/9e/ bc/64-ia-32-architectures-optimization-manual.pdf) indicate that the Xeon processors based on Broadwell/Haswell microarchitecture has the problem with Relaxed Ordering Attribute enabled, so add the whole list Device ID from Intel to the patch. v10: Significant rework based on Bjorn's feedback, reorganize the first 2 patches, now the Intel and AMD erratum soc has been divided to the different patches, rename the pcie_relaxed_ordering_supported() to pcie_relaxed_ordering_enabled(), and no need to check every intervening switch except the root ports, update some commits. v11: We shouldn't let the Intel engineer to acked the AMD's erratum patch, fix the funny mistake. ==================== Signed-off-by: David S. Miller <davem@davemloft.net> | 15 August 2017, 05:14:51 UTC |
| b629276 | Casey Leedom | 15 August 2017, 03:23:27 UTC | net/cxgb4vf: Use new PCI_DEV_FLAGS_NO_RELAXED_ORDERING flag cxgb4vf Ethernet driver now queries PCIe configuration space to determine if it can send TLPs to it with the Relaxed Ordering Attribute set, just like the pf did. Signed-off-by: Casey Leedom <leedom@chelsio.com> Signed-off-by: Ding Tianhong <dingtianhong@huawei.com> Reviewed-by: Casey Leedom <leedom@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 15 August 2017, 05:14:51 UTC |
| b0ba9d5 | Casey Leedom | 15 August 2017, 03:23:26 UTC | net/cxgb4: Use new PCI_DEV_FLAGS_NO_RELAXED_ORDERING flag cxgb4 Ethernet driver now queries PCIe configuration space to determine if it can send TLPs to it with the Relaxed Ordering Attribute set. Remove the enable_pcie_relaxed_ordering() to avoid enable PCIe Capability Device Control[Relaxed Ordering Enable] at probe routine, to make sure the driver will not send the Relaxed Ordering TLPs to the Root Complex which could not deal the Relaxed Ordering TLPs. Signed-off-by: Casey Leedom <leedom@chelsio.com> Signed-off-by: Ding Tianhong <dingtianhong@huawei.com> Reviewed-by: Casey Leedom <leedom@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 15 August 2017, 05:14:51 UTC |
| 077fa19 | dingtianhong | 15 August 2017, 03:23:25 UTC | PCI: Disable Relaxed Ordering Attributes for AMD A1100 Casey reported that the AMD ARM A1100 SoC has a bug in its PCIe Root Port where Upstream Transaction Layer Packets with the Relaxed Ordering Attribute clear are allowed to bypass earlier TLPs with Relaxed Ordering set, it would cause Data Corruption, so we need to disable Relaxed Ordering Attribute when Upstream TLPs to the Root Port. Reported-and-suggested-by: Casey Leedom <leedom@chelsio.com> Signed-off-by: Casey Leedom <leedom@chelsio.com> Signed-off-by: Ding Tianhong <dingtianhong@huawei.com> Acked-by: Casey Leedom <leedom@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 15 August 2017, 05:14:50 UTC |
| 87e09cd | dingtianhong | 15 August 2017, 03:23:24 UTC | PCI: Disable Relaxed Ordering for some Intel processors According to the Intel spec section 3.9.1 said: 3.9.1 Optimizing PCIe Performance for Accesses Toward Coherent Memory and Toward MMIO Regions (P2P) In order to maximize performance for PCIe devices in the processors listed in Table 3-6 below, the soft- ware should determine whether the accesses are toward coherent memory (system memory) or toward MMIO regions (P2P access to other devices). If the access is toward MMIO region, then software can command HW to set the RO bit in the TLP header, as this would allow hardware to achieve maximum throughput for these types of accesses. For accesses toward coherent memory, software can command HW to clear the RO bit in the TLP header (no RO), as this would allow hardware to achieve maximum throughput for these types of accesses. Table 3-6. Intel Processor CPU RP Device IDs for Processors Optimizing PCIe Performance Processor CPU RP Device IDs Intel Xeon processors based on 6F01H-6F0EH Broadwell microarchitecture Intel Xeon processors based on 2F01H-2F0EH Haswell microarchitecture It means some Intel processors has performance issue when use the Relaxed Ordering Attribute, so disable Relaxed Ordering for these root port. Signed-off-by: Casey Leedom <leedom@chelsio.com> Signed-off-by: Ding Tianhong <dingtianhong@huawei.com> Acked-by: Alexander Duyck <alexander.h.duyck@intel.com> Acked-by: Ashok Raj <ashok.raj@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 15 August 2017, 05:14:50 UTC |
| a99b646 | dingtianhong | 15 August 2017, 03:23:23 UTC | PCI: Disable PCIe Relaxed Ordering if unsupported When bit4 is set in the PCIe Device Control register, it indicates whether the device is permitted to use relaxed ordering. On some platforms using relaxed ordering can have performance issues or due to erratum can cause data-corruption. In such cases devices must avoid using relaxed ordering. The patch adds a new flag PCI_DEV_FLAGS_NO_RELAXED_ORDERING to indicate that Relaxed Ordering (RO) attribute should not be used for Transaction Layer Packets (TLP) targeted towards these affected root complexes. This patch checks if there is any node in the hierarchy that indicates that using relaxed ordering is not safe. In such cases the patch turns off the relaxed ordering by clearing the capability for this device. Signed-off-by: Casey Leedom <leedom@chelsio.com> Signed-off-by: Ding Tianhong <dingtianhong@huawei.com> Acked-by: Ashok Raj <ashok.raj@intel.com> Acked-by: Alexander Duyck <alexander.h.duyck@intel.com> Acked-by: Casey Leedom <leedom@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 15 August 2017, 05:14:50 UTC |
| 7698869 | KT Liao | 15 August 2017, 03:11:59 UTC | Input: elan_i2c - Add antoher Lenovo ACPI ID for upcoming Lenovo NB Add 2 new IDs (ELAN0609 and ELAN060B) to the list of ACPI IDs that should be handled by the driver. Signed-off-by: KT Liao <kt.liao@emc.com.tw> Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> | 15 August 2017, 03:22:11 UTC |
| 1874064 | Kai-Heng Feng | 15 August 2017, 03:11:26 UTC | Input: elan_i2c - add ELAN0608 to the ACPI table Similar to commit 722c5ac708b4f ("Input: elan_i2c - add ELAN0605 to the ACPI table"), ELAN0608 should be handled by elan_i2c. This touchpad can be found in Lenovo ideapad 320-14IKB. BugLink: https://bugs.launchpad.net/bugs/1708852 Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com> Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> | 15 August 2017, 03:22:02 UTC |
| fcd0735 | Linus Torvalds | 14 August 2017, 20:09:59 UTC | Merge tag 'md/4.13-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/shli/md Pull MD fixes from Shaohua Li: "Fix several bugs: - fix a rcu stall issue introduced in 4.12 (Neil Brown) - fix two raid5 cache race conditions (Song Liu)" * tag 'md/4.13-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/shli/md: MD: not clear ->safemode for external metadata array md/r5cache: fix io_unit handling in r5l_log_endio() md/r5cache: call mddev_lock/unlock() in r5c_journal_mode_set md: fix test in md_write_start() md: always clear ->safemode when md_check_recovery gets the mddev lock. | 14 August 2017, 20:09:59 UTC |
| 6b9d1c2 | Linus Torvalds | 14 August 2017, 18:35:56 UTC | Merge branch 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6 Pull crypto fixes from Herbert Xu: "Fix an error path bug in ixp4xx as well as a read overrun in sha1-avx2" * 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: crypto: x86/sha1 - Fix reads beyond the number of blocks passed crypto: ixp4xx - Fix error handling path in 'aead_perform()' | 14 August 2017, 18:35:56 UTC |
| 59a361b | Jon Paul Maloy | 14 August 2017, 16:28:49 UTC | tipc: avoid inheriting msg_non_seq flag when message is returned In the function msg_reverse(), we reverse the header while trying to reuse the original buffer whenever possible. Those rejected/returned messages are always transmitted as unicast, but the msg_non_seq field is not explicitly set to zero as it should be. We have seen cases where multicast senders set the message type to "NOT dest_droppable", meaning that a multicast message shorter than one MTU will be returned, e.g., during receive buffer overflow, by reusing the original buffer. This has the effect that even the 'msg_non_seq' field is inadvertently inherited by the rejected message, although it is now sent as a unicast message. This again leads the receiving unicast link endpoint to steer the packet toward the broadcast link receive function, where it is dropped. The affected unicast link is thereafter (after 100 failed retransmissions) declared 'stale' and reset. We fix this by unconditionally setting the 'msg_non_seq' flag to zero for all rejected/returned messages. Reported-by: Canh Duc Luu <canh.d.luu@dektech.com.au> Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 14 August 2017, 18:20:36 UTC |
| fed5f57 | Jon Paul Maloy | 14 August 2017, 15:55:56 UTC | tipc: accept PACKET_MULTICAST packets On L2 bearers, the TIPC broadcast function is sending out packets using the corresponding L2 broadcast address. At reception, we filter such packets under the assumption that they will also be delivered as broadcast packets. This assumption doesn't always hold true. Under high load, we have seen that a switch may convert the destination address and deliver the packet as a PACKET_MULTICAST, something leading to inadvertently dropped packets and a stale and reset broadcast link. We fix this by extending the reception filtering to accept packets of type PACKET_MULTICAST. Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 14 August 2017, 18:19:25 UTC |
| 2c87d63 | Florian Westphal | 13 August 2017, 22:52:58 UTC | ipv4: route: fix inet_rtm_getroute induced crash "ip route get $daddr iif eth0 from $saddr" causes: BUG: KASAN: use-after-free in ip_route_input_rcu+0x1535/0x1b50 Call Trace: ip_route_input_rcu+0x1535/0x1b50 ip_route_input_noref+0xf9/0x190 tcp_v4_early_demux+0x1a4/0x2b0 ip_rcv+0xbcb/0xc05 __netif_receive_skb+0x9c/0xd0 netif_receive_skb_internal+0x5a8/0x890 Problem is that inet_rtm_getroute calls either ip_route_input_rcu (if an iif was provided) or ip_route_output_key_hash_rcu. But ip_route_input_rcu, unlike ip_route_output_key_hash_rcu, already associates the dst_entry with the skb. This clears the SKB_DST_NOREF bit (i.e. skb_dst_drop will release/free the entry while it should not). Thus only set the dst if we called ip_route_output_key_hash_rcu(). I tested this patch by running: while true;do ip r get 10.0.1.2;done > /dev/null & while true;do ip r get 10.0.1.2 iif eth0 from 10.0.1.1;done > /dev/null & ... and saw no crash or memory leak. Cc: Roopa Prabhu <roopa@cumulusnetworks.com> Cc: David Ahern <dsahern@gmail.com> Fixes: ba52d61e0ff ("ipv4: route: restore skb_dst_set in inet_rtm_getroute") Signed-off-by: Florian Westphal <fw@strlen.de> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 14 August 2017, 18:08:29 UTC |
| 781cc76 | Daniel Vetter | 08 August 2017, 08:08:26 UTC | drm/i915: Avoid the gpu reset vs. modeset deadlock ... using the biggest hammer we have. This is essentially a weaponized version of the timeout-based wedging Chris added in commit 36703e79a982c8ce5a8e43833291f2719e92d0d1 Author: Chris Wilson <chris@chris-wilson.co.uk> Date: Thu Jun 22 11:56:25 2017 +0100 drm/i915: Break modeset deadlocks on reset Because defense-in-depth is good it's good to still have both. Also note that with the locking change we can now restrict this a lot (old gpus and special testing only), so this doesn't kill the TDR benefits on at least anything remotely modern. And futuremore with a few tricks it should be possible to make a much more educated guess about whether an atomic commit is stuck waiting on the gpu (atomic_t counting the pending i915_sw_fence used by the atomic modeset code should do it), so we can improve this. But for now just start with something that is guaranteed to recover faster, for much better CI througput. This defacto reverts TDR on these platforms, but there's not really a single commit to specify as the sole offender. v2: Add a debug message to explain what's going on. We can't DRM_ERROR because that spams CI. And the timeout based fallback still prints a DRM_ERROR, in case something goes wrong. v3: Fix comment layout (Michel) Fixes: 4680816be336 ("drm/i915: Wait first for submission, before waiting for request completion") Fixes: 221fe7994554 ("drm/i915: Perform a direct reset of the GPU from the waiter") Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Mika Kuoppala <mika.kuoppala@intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> (v2) Cc: Michel Thierry <michel.thierry@intel.com> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> (v2) Reviewed-by: Michel Thierry <michel.thierry@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20170808080828.23650-1-daniel.vetter@ffwll.ch (cherry picked from commit 97154ec242c14f646a3ab3b4da8f838d197f300d) Signed-off-by: Jani Nikula <jani.nikula@intel.com> | 14 August 2017, 16:28:46 UTC |
| 430ffaf | Chris Wilson | 12 August 2017, 15:27:24 UTC | drm/i915: Suppress switch_mm emission between the same aliasing_ppgtt When switching between contexts using the aliasing_ppgtt, the VM is shared. We don't need to reload the PD registers unless they are dirty. Martin Peres reported an issue that looks like corruption between Haswell context switches, bisecting to commit f9326be5f1d3 ("drm/i915: Rearrange switch_context to load the aliasing ppgtt on first use"). Switching between the same mm (the aliasing_ppgtt is used for all contexts in this case) should be a nop, but appears to trigger some side-effects in the context switch. However, as we know the switch is redundant in this case, we can skip it and continue to ignore the issue until somebody feels strong enough to investigate full-ppgtt on gen7 again! Except.. Martin was using full-ppgtt which is not supported as it doesn't work correctly yet. So whilst the bisect did yield valuable information about the failures, the fix should not have any user impact under default settings, with the exception of a slightly lower throughput on xcs as the VM would always be reloaded. v2: Also remember to set the legacy_active_context following the switch on xcs (commit e8a9c58fcd9a ("drm/i915: Unify active context tracking between legacy/execlists/guc")) Fixes: f9326be5f1d3 ("drm/i915: Rearrange switch_context to load the aliasing ppgtt on first use") Fixes: e8a9c58fcd9a ("drm/i915: Unify active context tracking between legacy/execlists/guc") Reported-by: Martin Peres <martin.peres@linux.intel.com> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Martin Peres <martin.peres@linux.intel.com> Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20170812152724.6883-1-chris@chris-wilson.co.uk (cherry picked from commit 12124bea5b82dc1e917304aed703c27292270051) Signed-off-by: Jani Nikula <jani.nikula@intel.com> | 14 August 2017, 16:28:37 UTC |
| 7eceb9d | Matthias Kaehlcke | 17 July 2017, 19:58:54 UTC | drm/i915: Return correct EDP voltage swing table for 0.85V For 0.85V cnl_get_buf_trans_edp() returns the DP table, instead of EDP. Use the correct table. The error was pointed out by this clang warning: drivers/gpu/drm/i915/intel_ddi.c:392:39: warning: variable 'cnl_ddi_translations_edp_0_85V' is not needed and will not be emitted [-Wunneeded-internal-declaration] static const struct cnl_ddi_buf_trans cnl_ddi_translations_edp_0_85V[] = { Fixes: cf54ca8bc567 ("drm/i915/cnl: Implement voltage swing sequence.") Signed-off-by: Matthias Kaehlcke <mka@chromium.org> Reviewed-by: Manasi Navare <manasi.d.navare@intel.com> Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20170717195854.192139-1-mka@chromium.org (cherry picked from commit 50946c89850db13bd672c664aec6cf4551f71fe9) Signed-off-by: Jani Nikula <jani.nikula@intel.com> | 14 August 2017, 16:28:28 UTC |
| 1dd7a3e | Rodrigo Vivi | 09 August 2017, 20:07:02 UTC | drm/i915/cnl: Add slice and subslice information to debugfs. A missing part to EU slice power gating is the debugfs interface. This patch actually should have been squashed to the initial EU slice power gating one. v2: Initial patch was merged without this part. Fixes: c7ae7e9ab207 ("drm/i915/cnl: Configure EU slice power gating.") Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20170809200702.11236-1-rodrigo.vivi@intel.com (cherry picked from commit 7ea1adf30f82a4c0910524ac06f8f1f26281bb23) Signed-off-by: Jani Nikula <jani.nikula@intel.com> | 14 August 2017, 16:28:22 UTC |
| a0125a9 | Chris Wilson | 08 August 2017, 13:19:04 UTC | drm/i915: Perform an invalidate prior to executing golden renderstate As we may have just bound the renderstate into the GGTT for execution, we need to ensure that the GTT TLB are also flushed. On snb-gt2, this would cause a random GPU hang at the start of a new context (e.g. boot) and on snb-gt1, it was causing the renderstate batch to take ~10s. It was the GPU hang that revealed the truth, as the CS gleefully executed beyond the end of the golden renderstate batch, a good indicator for a GTT TLB miss. Fixes: 20fe17aa52dc ("drm/i915: Remove redundant TLB invalidate on switching contexts") Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com> Cc: stable@vger.kernel.org Link: https://patchwork.freedesktop.org/patch/msgid/20170808131904.1385-1-chris@chris-wilson.co.uk Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com> Cc: <drm-intel-fixes@lists.freedesktop.org> # v4.12-rc1+ (cherry picked from commit 802673d66f8a6ded5d2689d597853c7bb3a70163) Signed-off-by: Jani Nikula <jani.nikula@intel.com> | 14 August 2017, 16:28:06 UTC |
| 26a72e8 | Lionel Landwerlin | 04 August 2017, 14:03:48 UTC | drm/i915: remove unused function declaration This function is not part of the driver anymore. Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com> Fixes: 90f4fcd56bda ("drm/i915: Remove forced stop ring on suspend/unload") Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20170804140348.24971-1-lionel.g.landwerlin@intel.com (cherry picked from commit fe29133df37ac31de9e657ad91bcf74cdfe8c4cd) Signed-off-by: Jani Nikula <jani.nikula@intel.com> | 14 August 2017, 16:27:59 UTC |
| 8df4b00 | Shih-Yuan Lee (FourDollars) | 14 August 2017, 10:00:47 UTC | ALSA: hda/realtek - Fix pincfg for Dell XPS 13 9370 The initial pin configs for Dell headset mode of ALC3271 has changed. /sys/class/sound/hwC0D0/init_pin_configs: (BIOS 0.1.4) 0x12 0xb7a60130 0x13 0xb8a61140 0x14 0x40000000 0x16 0x411111f0 0x17 0x90170110 0x18 0x411111f0 0x19 0x411111f0 0x1a 0x411111f0 0x1b 0x411111f0 0x1d 0x4087992d 0x1e 0x411111f0 0x21 0x04211020 has changed to ... /sys/class/sound/hwC0D0/init_pin_configs: (BIOS 0.2.0) 0x12 0xb7a60130 0x13 0x40000000 0x14 0x411111f0 0x16 0x411111f0 0x17 0x90170110 0x18 0x411111f0 0x19 0x411111f0 0x1a 0x411111f0 0x1b 0x411111f0 0x1d 0x4067992d 0x1e 0x411111f0 0x21 0x04211020 Fixes: b4576de87243 ("ALSA: hda/realtek - Fix typo of pincfg for Dell quirk") Signed-off-by: Shih-Yuan Lee (FourDollars) <sylee@canonical.com> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de> | 14 August 2017, 10:12:42 UTC |
| e9bf53a | Arend Van Spriel | 11 August 2017, 10:07:36 UTC | brcmfmac: feature check for multi-scheduled scan fails on bcm4343x devices The firmware feature check introduced for multi-scheduled scan turned out to be failing for bcm4343{0,1,8} devices resulting in a firmware crash. The reason for this crash has not yet been root cause so this patch avoids the feature check for those device as a short-term fix. Reported-by: Stefan Wahren <stefan.wahren@i2se.com> Reported-by: Ian Molton <ian@mnementh.co.uk> Fixes: 9fe929aaace6 ("brcmfmac: add firmware feature detection for gscan feature") Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> | 14 August 2017, 08:09:30 UTC |
| d86e63e | Icenowy Zheng | 11 August 2017, 14:27:35 UTC | arm64: allwinner: h5: fix pinctrl IRQs The pin controller of H5 has three IRQs at the chip's GIC, which represents three banks of pinctrl IRQs. However, the device tree used to miss the third IRQ of the pin controller, which makes the PG bank IRQ not usable. Add the missing IRQ to the pinctrl node. Fixes: 4e36de179f27 ("arm64: allwinner: h5: add Allwinner H5 .dtsi") Signed-off-by: Icenowy Zheng <icenowy@aosc.io> Signed-off-by: Chen-Yu Tsai <wens@csie.org> | 14 August 2017, 06:18:21 UTC |
| 11e9d78 | Andreas Born | 11 August 2017, 22:36:55 UTC | bonding: ratelimit failed speed/duplex update warning bond_miimon_commit() handles the UP transition for each slave of a bond in the case of MII. It is triggered 10 times per second for the default MII Polling interval of 100ms. For device drivers that do not implement __ethtool_get_link_ksettings() the call to bond_update_speed_duplex() fails persistently while the MII status could remain UP. That is, in this and other cases where the speed/duplex update keeps failing over a longer period of time while the MII state is UP, a warning is printed every MII polling interval. To address these excessive warnings net_ratelimit() should be used. Printing a warning once would not be sufficient since the call to bond_update_speed_duplex() could recover to succeed and fail again later. In that case there would be no new indication what went wrong. Fixes: b5bf0f5b16b9c (bonding: correctly update link status during mii-commit phase) Signed-off-by: Andreas Born <futur.andy@googlemail.com> Signed-off-by: David S. Miller <davem@davemloft.net> | 14 August 2017, 03:01:38 UTC |
| ef95484 | Linus Torvalds | 13 August 2017, 23:01:32 UTC | Linux 4.13-rc5 | 13 August 2017, 23:01:32 UTC |
| b2298fc | Linus Torvalds | 13 August 2017, 22:34:28 UTC | Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus Pull MIPS fixes from Ralf Baechle: "Another round of MIPS fixes: - compressed boot: Ignore a generated .c file - VDSO: Fix a register clobber list - DECstation: Fix an int-handler.S CPU_DADDI_WORKAROUNDS regression - Octeon: Fix recent cleanups that cleaned away a bit too much thus breaking the arch side of the EDAC and USB drivers. - uasm: Fix duplicate const in "const struct foo const bar[]" which GCC 7.1 no longer accepts. - Fix race on setting and getting cpu_online_mask - Fix preemption issue. To do so cleanly introduce macro to get the size of L3 cache line. - Revert include cleanup that sometimes results in build error - MicroMIPS uses bit 0 of the PC to indicate microMIPS mode. Make sure this bit is set for kernel entry as well. - Prevent configuring the kernel for both microMIPS and MT. There are no such CPUs currently and thus the combination is unsupported and results in build errors. This has been sitting in linux-next for a few days and has survived automated testing by Imagination's test farm. No known regressions pending except a number of issues that crept up due to lots of people switching to GCC 7.1" * 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: MIPS: Set ISA bit in entry-y for microMIPS kernels MIPS: Prevent building MT support for microMIPS kernels MIPS: PCI: Fix smp_processor_id() in preemptible MIPS: Introduce cpu_tcache_line_size MIPS: DEC: Fix an int-handler.S CPU_DADDI_WORKAROUNDS regression MIPS: VDSO: Fix clobber lists in fallback code paths Revert "MIPS: Don't unnecessarily include kmalloc.h into <asm/cache.h>." MIPS: OCTEON: Fix USB platform code breakage. MIPS: Octeon: Fix broken EDAC driver. MIPS: gitignore: ignore generated .c files MIPS: Fix race on setting and getting cpu_online_mask MIPS: mm: remove duplicate "const" qualifier on insn_table | 13 August 2017, 22:34:28 UTC |
| c9dc281 | Linus Torvalds | 13 August 2017, 19:44:18 UTC | Merge tag 'driver-core-4.13-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core fixes from Greg KH: "Here are three firmware core fixes for 4.13-rc5. All three of these fix reported issues and have been floating around for a few weeks. They have been in linux-next with no reported problems" * tag 'driver-core-4.13-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: firmware: avoid invalid fallback aborts by using killable wait firmware: fix batched requests - send wake up on failure on direct lookups firmware: fix batched requests - wake all waiters | 13 August 2017, 19:44:18 UTC |
| ce7ba95 | Linus Torvalds | 13 August 2017, 19:41:58 UTC | Merge tag 'char-misc-4.13-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char/misc fixes from Greg KH: "Here are two patches for 4.13-rc5. One is a fix for a reported thunderbolt issue, and the other a fix for an MEI driver issue. Both have been in linux-next with no reported issues" * tag 'char-misc-4.13-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: thunderbolt: Do not enumerate more ports from DROM than the controller has mei: exclude device from suspend direct complete optimization | 13 August 2017, 19:41:58 UTC |
| 438630e | Linus Torvalds | 13 August 2017, 19:33:35 UTC | Merge tag 'tty-4.13-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty Pull tty/serial fixes from Greg KH: "Here are two tty serial driver fixes for 4.13-rc5. One is a revert of a -rc1 patch that turned out to not be a good idea, and the other is a fix for the pl011 serial driver. Both have been in linux-next with no reported issues" * tag 'tty-4.13-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: Revert "serial: Delete dead code for CIR serial ports" tty: pl011: fix initialization order of QDF2400 E44 | 13 August 2017, 19:33:35 UTC |
| dd95f18 | Linus Torvalds | 13 August 2017, 19:30:17 UTC | Merge tag 'staging-4.13-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging Pull staging/iio fixes from Greg KH: "Here are some Staging and IIO driver fixes for 4.13-rc5. Nothing major, just a number of small fixes for reported issues. All of these have been in linux-next for a while now with no reported issues. Full details are in the shortlog" * tag 'staging-4.13-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: staging: comedi: comedi_fops: do not call blocking ops when !TASK_RUNNING iio: aspeed-adc: wait for initial sequence. iio: accel: bmc150: Always restore device to normal mode after suspend-resume staging:iio:resolver:ad2s1210 fix negative IIO_ANGL_VEL read iio: adc: axp288: Fix the GPADC pin reading often wrongly returning 0 iio: adc: vf610_adc: Fix VALT selection value for REFSEL bits iio: accel: st_accel: add SPI-3wire support iio: adc: Revert "axp288: Drop bogus AXP288_ADC_TS_PIN_CTRL register modifications" iio: adc: sun4i-gpadc-iio: fix unbalanced irq enable/disable iio: pressure: st_pressure_core: disable multiread by default for LPS22HB iio: light: tsl2563: use correct event code | 13 August 2017, 19:30:17 UTC |
| 10cec91 | Linus Torvalds | 13 August 2017, 19:27:42 UTC | Merge tag 'usb-4.13-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB fixes from Greg KH: "Here are a number of small USB driver fixes and new device ids for 4.13-rc5. There is the usual gadget driver fixes, some new quirks for "messy" hardware, and some new device ids. All have been in linux-next with no reported issues" * tag 'usb-4.13-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: USB: serial: pl2303: add new ATEN device id usb: quirks: Add no-lpm quirk for Moshi USB to Ethernet Adapter USB: Check for dropped connection before switching to full speed usb:xhci:Add quirk for Certain failing HP keyboard on reset after resume usb: renesas_usbhs: gadget: fix unused-but-set-variable warning usb: renesas_usbhs: Fix UGCTRL2 value for R-Car Gen3 usb: phy: phy-msm-usb: Fix usage of devm_regulator_bulk_get() usb: gadget: udc: renesas_usb3: Fix usb_gadget_giveback_request() calling usb: dwc3: gadget: Correct ISOC DATA PIDs for short packets USB: serial: option: add D-Link DWM-222 device ID usb: musb: fix tx fifo flush handling again usb: core: unlink urbs from the tail of the endpoint's urb_list usb-storage: fix deadlock involving host lock and scsi_done uas: Add US_FL_IGNORE_RESIDUE for Initio Corporation INIC-3069 USB: hcd: Mark secondary HCD as dead if the primary one died USB: serial: cp210x: add support for Qivicon USB ZigBee dongle | 13 August 2017, 19:27:42 UTC |
| 89a5527 | Linus Torvalds | 12 August 2017, 23:19:43 UTC | Merge tag 'for-linus-20170812' of git://git.infradead.org/linux-mtd Pull another MTD fix from Brian Norris: "An mtdblock regression occurred in -rc1 (all writes were broken!), in the process of some block subsystem refactoring. Noticed and fixed last week, but I'm a little slow on the uptake" * tag 'for-linus-20170812' of git://git.infradead.org/linux-mtd: mtd: blkdevs: Fix mtd block write failure | 12 August 2017, 23:19:43 UTC |
| 9a51544 | Abhishek Sahu | 02 August 2017, 12:33:05 UTC | mtd: blkdevs: Fix mtd block write failure All the MTD block write requests are failing with following error messages mkfs.ext4 /dev/mtdblock0 print_req_error: I/O error, dev mtdblock0, sector 0 Buffer I/O error on dev mtdblock0, logical block 0, lost async page write The control is going to default case after block write request because of missing return. Fixes: commit 2a842acab109 ("block: introduce new block status code type") Signed-off-by: Abhishek Sahu <absahu@codeaurora.org> Signed-off-by: Brian Norris <computersforpeace@gmail.com> | 12 August 2017, 21:53:24 UTC |
| a99bcdc | Linus Torvalds | 12 August 2017, 19:08:59 UTC | Merge git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending Pull SCSI target fixes from Nicholas Bellinger: "The highlights include: - Fix iscsi-target payload memory leak during ISCSI_FLAG_TEXT_CONTINUE (Varun Prakash) - Fix tcm_qla2xxx incorrect use of tcm_qla2xxx_free_cmd during ABORT (Pascal de Bruijn + Himanshu Madhani + nab) - Fix iscsi-target long-standing issue with parallel delete of a single network portal across multiple target instances (Gary Guo + nab) - Fix target dynamic se_node GPF during uncached shutdown regression (Justin Maggard + nab)" * git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending: target: Fix node_acl demo-mode + uncached dynamic shutdown regression iscsi-target: Fix iscsi_np reset hung task during parallel delete qla2xxx: Fix incorrect tcm_qla2xxx_free_cmd use during TMR ABORT (v2) cxgbit: fix sg_nents calculation iscsi-target: fix invalid flags in text response iscsi-target: fix memory leak in iscsit_setup_text_cmd() cxgbit: add missing __kfree_skb() tcmu: free old string on reconfig tcmu: Fix possible to/from address overflow when doing the memcpy | 12 August 2017, 19:08:59 UTC |
| 043cd07 | Linus Torvalds | 12 August 2017, 16:01:36 UTC | Merge tag 'for-linus-4.13b-rc5-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip Pull xen fixes from Juergen Gross: "Some fixes for Xen: - a fix for a regression introduced in 4.13 for a Xen HVM-guest configured with KASLR - a fix for a possible deadlock in the xenbus driver when booting the system - a fix for lost interrupts in Xen guests" * tag 'for-linus-4.13b-rc5-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: xen/events: Fix interrupt lost during irq_disable and irq_enable xen: avoid deadlock in xenbus xen: fix hvm guest with kaslr enabled xen: split up xen_hvm_init_shared_info() x86: provide an init_mem_mapping hypervisor hook | 12 August 2017, 16:01:36 UTC |
| afc1f55 | Shaohua Li | 12 August 2017, 03:34:45 UTC | MD: not clear ->safemode for external metadata array ->safemode should be triggered by mdadm for external metadaa array, otherwise array's state confuses mdadm. Fixes: 33182d15c6bf(md: always clear ->safemode when md_check_recovery gets the mddev lock.) Cc: NeilBrown <neilb@suse.com> Signed-off-by: Shaohua Li <shli@fb.com> | 12 August 2017, 03:42:06 UTC |
