Revision 74ca317c26a3f8543203b61d262c0ab2e30c384e authored by Vivek Goyal on 29 August 2014, 22:18:46 UTC, committed by Linus Torvalds on 29 August 2014, 23:28:16 UTC
Currently new system call kexec_file_load() and all the associated code
compiles if CONFIG_KEXEC=y.  But new syscall also compiles purgatory
code which currently uses gcc option -mcmodel=large.  This option seems
to be available only gcc 4.4 onwards.

Hiding new functionality behind a new config option will not break
existing users of old gcc.  Those who wish to enable new functionality
will require new gcc.  Having said that, I am trying to figure out how
can I move away from using -mcmodel=large but that can take a while.

I think there are other advantages of introducing this new config
option.  As this option will be enabled only on x86_64, other arches
don't have to compile generic kexec code which will never be used.  This
new code selects CRYPTO=y and CRYPTO_SHA256=y.  And all other arches had
to do this for CONFIG_KEXEC.  Now with introduction of new config
option, we can remove crypto dependency from other arches.

Now CONFIG_KEXEC_FILE is available only on x86_64.  So whereever I had
CONFIG_X86_64 defined, I got rid of that.

For CONFIG_KEXEC_FILE, instead of doing select CRYPTO=y, I changed it to
"depends on CRYPTO=y".  This should be safer as "select" is not
recursive.

Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Cc: Eric Biederman <ebiederm@xmission.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Tested-by: Shaun Ruffell <sruffell@digium.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
1 parent b38af47
Raw File
pci-bcm47xx.c
/*
 *  Copyright (C) 2008 Aurelien Jarno <aurelien@aurel32.net>
 *
 *  This program is free software; you can redistribute  it and/or modify it
 *  under  the terms of  the GNU General  Public License as published by the
 *  Free Software Foundation;  either version 2 of the  License, or (at your
 *  option) any later version.
 *
 *  THIS  SOFTWARE  IS PROVIDED   ``AS  IS'' AND   ANY  EXPRESS OR IMPLIED
 *  WARRANTIES,   INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
 *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
 *  NO  EVENT  SHALL   THE AUTHOR  BE    LIABLE FOR ANY   DIRECT, INDIRECT,
 *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
 *  NOT LIMITED   TO, PROCUREMENT OF  SUBSTITUTE GOODS  OR SERVICES; LOSS OF
 *  USE, DATA,  OR PROFITS; OR  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
 *  ANY THEORY OF LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT
 *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
 *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 *
 *  You should have received a copy of the  GNU General Public License along
 *  with this program; if not, write  to the Free Software Foundation, Inc.,
 *  675 Mass Ave, Cambridge, MA 02139, USA.
 */

#include <linux/types.h>
#include <linux/pci.h>
#include <linux/ssb/ssb.h>
#include <linux/bcma/bcma.h>
#include <bcm47xx.h>

int __init pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
{
	return 0;
}

#ifdef CONFIG_BCM47XX_SSB
static int bcm47xx_pcibios_plat_dev_init_ssb(struct pci_dev *dev)
{
	int res;
	u8 slot, pin;

	res = ssb_pcibios_plat_dev_init(dev);
	if (res < 0) {
		printk(KERN_ALERT "PCI: Failed to init device %s\n",
		       pci_name(dev));
		return res;
	}

	pci_read_config_byte(dev, PCI_INTERRUPT_PIN, &pin);
	slot = PCI_SLOT(dev->devfn);
	res = ssb_pcibios_map_irq(dev, slot, pin);

	/* IRQ-0 and IRQ-1 are software interrupts. */
	if (res < 2) {
		printk(KERN_ALERT "PCI: Failed to map IRQ of device %s\n",
		       pci_name(dev));
		return res;
	}

	dev->irq = res;
	return 0;
}
#endif

#ifdef CONFIG_BCM47XX_BCMA
static int bcm47xx_pcibios_plat_dev_init_bcma(struct pci_dev *dev)
{
	int res;

	res = bcma_core_pci_plat_dev_init(dev);
	if (res < 0) {
		printk(KERN_ALERT "PCI: Failed to init device %s\n",
		       pci_name(dev));
		return res;
	}

	res = bcma_core_pci_pcibios_map_irq(dev);

	/* IRQ-0 and IRQ-1 are software interrupts. */
	if (res < 2) {
		printk(KERN_ALERT "PCI: Failed to map IRQ of device %s\n",
		       pci_name(dev));
		return res;
	}

	dev->irq = res;
	return 0;
}
#endif

int pcibios_plat_dev_init(struct pci_dev *dev)
{
#ifdef CONFIG_BCM47XX_SSB
	if (bcm47xx_bus_type ==	 BCM47XX_BUS_TYPE_SSB)
		return bcm47xx_pcibios_plat_dev_init_ssb(dev);
	else
#endif
#ifdef CONFIG_BCM47XX_BCMA
	if  (bcm47xx_bus_type ==  BCM47XX_BUS_TYPE_BCMA)
		return bcm47xx_pcibios_plat_dev_init_bcma(dev);
	else
#endif
		return 0;
}
back to top